From be8779da6b8ce7079d2b3ff33d48ba41ddfca27c Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Mon, 7 Nov 2016 22:01:51 +0100 Subject: configs/qmx6: remove defconfig The original submitter and follow-up contributors to the qmx6 defconfig no longer have the hardware available or the time/interest to update this defconfig, which currently fails to build with gcc 5.x. Due to this, this commit removes this defconfig. Signed-off-by: Thomas Petazzoni --- board/congatec/qmx6/readme.txt | 36 ------------------------------------ 1 file changed, 36 deletions(-) delete mode 100644 board/congatec/qmx6/readme.txt (limited to 'board') diff --git a/board/congatec/qmx6/readme.txt b/board/congatec/qmx6/readme.txt deleted file mode 100644 index d2e0dcacb..000000000 --- a/board/congatec/qmx6/readme.txt +++ /dev/null @@ -1,36 +0,0 @@ -This is the minimal buildroot support for the Congatec QMX6 Qseven CoM - -conga-QMX6 is based on the freescale iMX6 SoC. For more information please -have a look at http://www.congatec.com/products/qseven/conga-qmx6.html - -The configuration is based on the currently latest kernel release from -Congatec's git repository which is based on 3.0.35. The bootloader u-boot -is preconfigured on the CPU module and does not need to be replaced. - -To build the default configuration you only have to: - - make qmx6_defconfig && make - -You will need a microSD card of sufficient size and the first or only -partition configured as Linux type. - -To transfer the system to the card do: - - $ sudo dd if=output/images/rootfs.ext2 of=/dev/sdX1 - -You can optionally extend the filesystem size to the whole partition: - - $ sudo resize2fs /dev/sdX1 - -You can also update the card image without completely rewriting it: - - $ sudo mount /dev/sdX1 /mnt - $ sudo tar xf output/images/rootfs.tar -C /mnt - $ sudo umount /mnt - -Connect a terminal program to the rs232 connector marked "CONSOLE" -with baudrate set to 115200, insert the microSD card into the socket -on the CPU module and power the board to watch the system boot. - -Booting from the SD card slot on the base board is currently not -supported. -- cgit v1.2.3