From d5ad41a723f1e7d61cce61ac8e8a19314baf1883 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Thu, 10 Nov 2016 13:39:47 -0200 Subject: configs/olimex_imx233_olinuxino: readme: Improve SD card flashing procedure Make the SD card flashing procedure text consistent with the other i.MX boards. Signed-off-by: Fabio Estevam Signed-off-by: Thomas Petazzoni --- board/olimex/imx233_olinuxino/readme.txt | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) (limited to 'board') diff --git a/board/olimex/imx233_olinuxino/readme.txt b/board/olimex/imx233_olinuxino/readme.txt index d6a7377c1..2722c3acb 100644 --- a/board/olimex/imx233_olinuxino/readme.txt +++ b/board/olimex/imx233_olinuxino/readme.txt @@ -17,13 +17,16 @@ output/images === Use of generated SD card image =========================================== -Just write sdcard.img directly to the SD card +To determine the device associated to the SD card have a look in the +/proc/partitions file: -***** WARNING: Double check that /dev/sdc is your MicroSD card ***** -***** It might be /dev/sdb or some other device name ***** -***** Failure to do so may result in you wiping your hard disk ***** + cat /proc/partitions + +Then, run the following command as root: + +*** WARNING! The command will destroy all the card content. Use with care! *** - # dd if=output/images/sdcard.img of=/dev/sdc bs=512 + sudo dd if=output/images/sdcard.img of=/dev/ === Manual creation of SD card image ========================================= -- cgit v1.2.3