From e715914a38670af52648612ed3ee478f69a879cf Mon Sep 17 00:00:00 2001 From: Dagg Stompler Date: Fri, 27 Jan 2017 09:44:01 +0200 Subject: configs/odroidc2: update boot.ini to 5ce6bcc6d8048ba5ff351516b751d52f5cda6981 changes: - add multicam support - add the new options - organization and add uhs and card remove controls - clarify hdmi/dvi/vga selection Signed-off-by: Dagg Stompler Signed-off-by: Thomas Petazzoni --- board/hardkernel/odroidc2/boot.ini | 152 +++++++++++++++++++++++++++++++++---- 1 file changed, 139 insertions(+), 13 deletions(-) (limited to 'board') diff --git a/board/hardkernel/odroidc2/boot.ini b/board/hardkernel/odroidc2/boot.ini index 203a42a03..2fdffa304 100644 --- a/board/hardkernel/odroidc2/boot.ini +++ b/board/hardkernel/odroidc2/boot.ini @@ -1,42 +1,169 @@ ODROIDC2-UBOOT-CONFIG -# HDMI mode +######################################################################## +# Changes made to this are overwritten every time there's a new upgrade +# To make your changes permanent change it on +# boot.ini.default +# After changing it on boot.ini.default run the bootini command to +# rewrite this file with your personal permanent settings. +# Documentation: http://odroid.com/dokuwiki/doku.php?id=en:c2_persistent_bootini +######################################################################## + +# Possible screen resolutions +# Uncomment only a single Line! The line with setenv written. +# At least one mode must be selected. + +# Custom modeline! +# To use custom modeline you need to disable all the below resolutions +# and setup your own! +# For more information check our wiki: +# http://odroid.com/dokuwiki/doku.php?id=en:c2_hdmi_autosetting +# Example below: +# setenv m "custombuilt" +# setenv modeline "1920,1200,154000,74040,60,1920,1968,2000,2080,1200,1202,1208,1235,1,0,1" + +# 480 Lines (720x480) +# setenv m "480i60hz" # Interlaced 60Hz +# setenv m "480i_rpt" # Interlaced for Rear Projection Televisions 60Hz +# setenv m "480p60hz" # 480 Progressive 60Hz +# setenv m "480p_rpt" # 480 Progressive for Rear Projection Televisions 60Hz + +# 576 Lines (720x576) +# setenv m "576i50hz" # Interlaced 50Hz +# setenv m "576i_rpt" # Interlaced for Rear Projection Televisions 50Hz +# setenv m "576p50hz" # Progressive 50Hz +# setenv m "576p_rpt" # Progressive for Rear Projection Televisions 50Hz + +# 720 Lines (1280x720) +# setenv m "720p50hz" # 50Hz +# setenv m "720p60hz" # 60Hz + +# 1080 Lines (1920x1080) +# setenv m "1080i60hz" # Interlaced 60Hz setenv m "1080p60hz" # Progressive 60Hz +# setenv m "1080i50hz" # Interlaced 50Hz +# setenv m "1080p50hz" # Progressive 50Hz +# setenv m "1080p24hz" # Progressive 24Hz + +# 4K (3840x2160) +# setenv m "2160p30hz" # Progressive 30Hz +# setenv m "2160p25hz" # Progressive 25Hz +# setenv m "2160p24hz" # Progressive 24Hz +# setenv m "smpte24hz" # Progressive 24Hz SMPTE +# setenv m "2160p50hz" # Progressive 50Hz +# setenv m "2160p60hz" # Progressive 60Hz +# setenv m "2160p50hz420" # Progressive 50Hz with YCbCr 4:2:0 (Requires TV/Monitor that supports it) +# setenv m "2160p60hz420" # Progressive 60Hz with YCbCr 4:2:0 (Requires TV/Monitor that supports it) + +### VESA modes ### +# setenv m "640x480p60hz" +# setenv m "800x480p60hz" +# setenv m "480x800p60hz" +# setenv m "800x600p60hz" +# setenv m "1024x600p60hz" +# setenv m "1024x768p60hz" +# setenv m "1280x800p60hz" +# setenv m "1280x1024p60hz" +# setenv m "1360x768p60hz" +# setenv m "1440x900p60hz" +# setenv m "1600x900p60hz" +# setenv m "1680x1050p60hz" +# setenv m "1600x1200p60hz" +# setenv m "1920x1200p60hz" +# setenv m "2560x1080p60hz" +# setenv m "2560x1440p60hz" +# setenv m "2560x1600p60hz" +# setenv m "3440x1440p60hz" # HDMI BPP Mode setenv m_bpp "32" +# setenv m_bpp "24" +# setenv m_bpp "16" + +# HDMI DVI/VGA modes +# By default its set to HDMI, if needed change below. +# Uncomment only a single Line. +# setenv vout "dvi" +# setenv vout "vga" # HDMI HotPlug Detection control # Allows you to force HDMI thinking that the cable is connected. # true = HDMI will believe that cable is always connected # false = will let board/monitor negotiate the connection status setenv hpd "true" +# setenv hpd "false" -# Default Console Device Setting -setenv condev "console=ttyS0,115200n8 console=tty0" # on both +# Monitor output +# Controls if HDMI PHY should output anything to the monitor +setenv monitor_onoff "false" # true or false + +# Server Mode (aka. No Graphics) +# Setting nographics to 1 will disable all video subsystem +# This mode is ideal of server type usage. (Saves ~300Mb of RAM) +setenv nographics "0" # Meson Timer # 1 - Meson Timer -# 0 - Arch Timer -# Using meson_timer improves the video playback whoever it breaks KVM (virtualization). +# 0 - Arch Timer +# Using meson_timer improves the video playback however it breaks KVM (virtualization). # Using arch timer allows KVM/Virtualization to work however you'll experience poor video setenv mesontimer "1" -# Server Mode (aka. No Graphics) -# Setting nographics to 1 will disable all video subsystem -# This mode is ideal of server type usage. (Saves ~300Mb of RAM) -setenv nographics "0" +# UHS (Ultra High Speed) MicroSD mode enable/disable +setenv disableuhs "false" + +# MicroSD Card Detection enable/disable +# Force the MMC controlled to believe that a card is connected. +setenv mmc_removable "true" + +# USB Multi WebCam tweak +# Only enable this if you use it. +setenv usbmulticam "false" + +# Default Console Device Setting +setenv condev "console=ttyS0,115200n8 console=tty0" # on both + +# CPU Frequency / Cores control +########################################### +### WARNING!!! WARNING!!! WARNING!!! +# Before changing anything here please read the wiki entry: +# http://odroid.com/dokuwiki/doku.php?id=en:c2_set_cpu_freq +# +# MAX CPU's +# setenv maxcpus "1" +# setenv maxcpus "2" +# setenv maxcpus "3" +setenv maxcpus "4" + +# MAX Frequency +# setenv max_freq "2016" # 2.016GHz +# setenv max_freq "1944" # 1.944GHz +# setenv max_freq "1944" # 1.944GHz +# setenv max_freq "1920" # 1.920GHz +# setenv max_freq "1896" # 1.896GHz +# setenv max_freq "1752" # 1.752GHz +# setenv max_freq "1680" # 1.680GHz +# setenv max_freq "1656" # 1.656GHz +setenv max_freq "1536" # 1.536GHz + + ########################################### # Boot Arguments -setenv bootargs "root=/dev/mmcblk0p2 rootwait ro ${condev} no_console_suspend hdmimode=${m} m_bpp=${m_bpp} vout=${vout} fsck.repair=yes net.ifnames=0 elevator=noop disablehpd=${hpd}" +if test "${m}" = "custombuilt"; then setenv cmode "modeline=${modeline}"; fi + +setenv bootargs "root=/dev/mmcblk0p2 rootwait ro ${condev} no_console_suspend hdmimode=${m} ${cmode} m_bpp=${m_bpp} vout=${vout} fsck.repair=yes net.ifnames=0 elevator=noop disablehpd=${hpd} max_freq=${max_freq} maxcpus=${maxcpus} monitor_onoff=${monitor_onoff} disableuhs=${disableuhs} mmc_removable=${mmc_removable} usbmulticam=${usbmulticam}" + +# Booting -# Load Images setenv loadaddr "0x11000000" -setenv dtb_loadaddr "0x10000000" +setenv dtb_loadaddr "0x1000000" +setenv initrd_loadaddr "0x13000000" + fatload mmc 0:1 ${loadaddr} Image fatload mmc 0:1 ${dtb_loadaddr} meson64_odroidc2.dtb +fdt addr ${dtb_loadaddr} if test "${mesontimer}" = "0"; then fdt rm /meson_timer; fdt rm /cpus/cpu@0/timer; fdt rm /cpus/cpu@1/timer; fdt rm /cpus/cpu@2/timer; fdt rm /cpus/cpu@3/timer; fi if test "${mesontimer}" = "1"; then fdt rm /timer; fi @@ -46,5 +173,4 @@ if test "${nographics}" = "1"; then fdt rm /meson-fb; fdt rm /amhdmitx; fdt rm / if test "${nographics}" = "1"; then fdt rm /meson-vout; fdt rm /mesonstream; fdt rm /meson-fb; fi if test "${nographics}" = "1"; then fdt rm /deinterlace; fdt rm /codec_mm; fi -# Booting booti ${loadaddr} - ${dtb_loadaddr} -- cgit v1.2.3