| Age | Commit message (Collapse) | Author |
|---|
|
In order to add support for features specific to the VC4 driver, add
helpers for checking and requiring the driver like it's done for the
i915 driver.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com>
|
|
And make sure we get the LEASE=1 value, indicating a lessee change.
v2: Apparently netlink reading can leak EAGAIN out through
udev_monitor_receive_device. No idea what's going on there, so let's
wrap some duct tape around it.
v3: Lyude reported that we might get a few udev events on startup of
the test. Drain those first.
v4: Use the igt hotplug library functions, they already take care of
all the uevent special cases.
Cc: Lyude Paul <lyude@redhat.com>
Cc: Keith Packard <keithp@keithp.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
|
|
To control hang detection, we manipulate the i915.reset module
parameter. However, to be nice we should SKIP if we cannot modify the
parameter as opposed to outright FAILing.
References: https://bugs.freedesktop.org/show_bug.cgi?id=108891
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Antonio Argenziano <antonio.argenziano@intel.com>
|
|
They don't work, see igt_can_fail(). We already check for
test_with_subtests in igt_subtest.
Reviewed-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
|
|
Except in igt_simulation.c where we use tricks and intentionally only
want part of the array in some cases.
Suggested-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
|
|
While at it, convert the existing testcase for invalid subtest names
to a positive one.
This is the only thing the invalid subtest checking for all tests did
cover, which wasn't covered through some other checks already.
Reviewed-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
|
|
This way we can make sure they die with an assert, which is what we
want.
Reviewed-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
|
|
And convert everything over.
igt_segfault needed a bit of care to differentiate between a real
death-by-signal and igt_exit mapping a child process signal death to
an exit code.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Start with internal_assert, more will follow. While at it, use
internal_assert everywhere (except where we check exit status, those
will get dedicated assert checks).
Reviewed-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
|
|
We have tons of issues with crc mismatches, but often by that time
there was already a fifo underrun, which disables further fifo
underrun reporting. Reset fifo underrun reporting before we capture a
crc so that it's easier to figure out why the crc mismatch happened.
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
|
|
We force a reset on test exit so that we can rapidly cleanup after a
naughty test, it is not unknown for us to leave a queue of hanging
batches around. However, if we have also fiddled with the i915.reset
parameter in the meantime, this can leave the kernel unable to fulfil
our request (and those naughty batches continue to disrupt testing).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Petri Latvala <petri.latvala@intel.com>
Acked-by: Antonio Argenziano <antonio.argenziano@intel.com>
|
|
We use the timeout status for when the runner had to kill a testcase,
which indicates a more sever issue than an operation failing that we
expected to complete within seconds.
Since it's unused, drop it.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
|
|
Added in
commit 054eb1abecd1cce2e4ee0516f3ff8a67a35dca22
Author: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Date: Thu Mar 30 14:32:29 2017 +0100
benchmarks/gem_wsim: Command submission workload simulator
but since then the only user was lost.
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
|
|
There's a lot more ways to leak children than igt_fork, some even
handrolled. So check for that. Also have a nice littel testcase for
that too.
v2: Don't hang if there's a leaked child process (Chris). Has the
added benefit that my library unit test also gets faster!
v3: Rebase.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
|
|
Spotted by my new "are there any child processes left?" check in
igt_exit - we need to put all the igt_require before we start any real
test logic.
v2: Rebase.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
|
|
Instead of cleaning up the mess in igt_exit make sure we don't even
let it out of the container. See also
commit 754876378d6c9b2775e8c07b4d16f9878c55949f
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Fri Feb 26 22:11:10 2016 +0000
igt/gem_sync: Enforce a timeout of 20s
which added this helper.
To make sure that everyone follows the rules, add an assert.
We're keeping the cleanup code as a failsafe, and because it speeds
up the testcase I'm following up with.
v2: Chris pointed out that my original patch did nothing. Which I
didn't catch because my testcase was also broken. Unfortunately this
means we need to open code part of the waiting.
v3: The 2nd __igt_waitchildren() isn't necessary, __igt_waitchildren
recovers from EINTR already and keeps waiting (Chris Wilson).
v4: Change the timeout signal vs waitchildren logic to be race-free
(Chris). This changes the exit code for a timeout from
IGT_EXIT_FAILURE to SIGKILL + 128.
v5: Clarify the docs (Chris).
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
|
|
Another corner case to check.
v2: Rebase. Note that we still have the SIG + 128 exit code, that's
how igt_waitchildren forwards child death to the parent's exit code.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
|
|
Note that without the igt_waitchildren nothing at all gets forwarded,
maybe we should check for left-behind children somewhere on subtest
exit.
v2: Drop NIH exit status handling (Chris).
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
|
|
Spotted by Chris.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
|
|
This tests checks if hardware is able to do selective update when
screen changes.
PSR2 don't trigger interruptions and the 'PSR2 SU status' register
is not kept loaded all the times, so it is necessary keep polling
PSR status debugfs until those values are loaded.
Also from DEEP_SLEEP state HW will not do a seletive update, as
most of the memory/context is lost in deep sleep state hardware will
need to exit PSR mode then wait a configured number of frames to
activate PSR again to then start doing seletive updates, that is why
just one screen change is not enough to pass this tests.
When a selective update happens and the values are loaded and read
from debugfs it is compared with the expected value of seletive
update blocks, if matches the polling is stopped and the test passed
otherwise it will wait until it reachs a maximum number o screen
changes to fail the test.
v2: Using new SU blocks debugfs output
v3:
- removed the timerfd to fail the test, now failing based in a
maximum number of screen changes
- removing thread to read debugfs, read from main thread is enough
- improved commit message
v4:
- getting cairo context for frontbuffer test in prepare()
- droppoing poll(), using blocking timerfd instead
v5:
- Doing a modeset before trying to enable PSR2
v6:
- doing atomic commits to fix(legacy commit is taking more time in
recent kernels causing us to miss the SU when reading debugfs) and
speedup test
- fixed code to skip test when PSR2 is not possile
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Tested-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
|
|
The P01x formats are planar 16 bits per component, with the unused lower bits set to 0.
This means they can all be converted the same way. Only the range is slightly different,
and this is handled in the color_encoding implementation.
This requires cairo 1.17.2 and pixman 0.36. This works but doesn't give extra precision.
For more than 8 bits precision a few more patches are required to pixman, pending review:
https://lists.freedesktop.org/archives/pixman/2019-January/004815.html
https://lists.freedesktop.org/archives/pixman/2019-January/004809.html
Once those are merged, we will require the next pixman release for better precision.
Changes since v1:
- Add fallback color definitions when compiling on cairo version < 1.17.2.
- Skip when FB creation fails on HDR formats, instead of failing.
Changes since v2:
- Complain slightly harder when pixman/cairo are out of date.
- Create a fb with alpha when converting to pixman formats with alpha.
- Oops, s/pixman_format_code_t/cairo_format_t/
Changes since v3:
- Rebase on top of upstream YUV changes.
Changes since v4:
- Rebase again.
- Use drm_fourcc.h from drm-misc-next.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> #v4
|
|
We're starting to add support for 10, 12 and 16-bits formats that all have
different values for the Y offset and range. Some 10 bits formats
go from [0...1023], others go to [0...1023] shifted left by 6. To
accomodate all formats add a struct definition for all various formats,
this can be extended further when we add new formats.
Changes since v1:
- Rebase on top of added yuv changes.
- Add commit description (swatish)
- Add missing newline. (swatish)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> #v1
|
|
Really not needed if we check this with meson.
Acked-by: Petri Latvala <petri.latvala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
|
|
Thanks to the previous reworks, we can now add new YUV formats pretty
easily. This patch adds support for the NV12, NV16, NV21, NV61, YUV420,
YVU420, YUV422 and YVU422 formats.
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
|
|
We only need to allocate a buffer using the GEM API when we're in the
condition that we currently test, and that we're running on i915.
All the other cases can be handled by a fallback to a dumb buffer
allocation. Let's simplify the code a bit to reflect that.
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
|
|
YUV dumb buffers, just like i915 GEM buffers also need to be cleared once
allocated. Make sure it happens.
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
|
|
The dumb buffer allocation API only considers a single plane, and even
though allocating multi-planar buffers through it is allowed, the stride it
gives back is the the width times the bpp passed as an argument.
That doesn't work in our case, since the bpp is going to be the one we give
as an argument, but split over three planes so the stride doesn't match
anymore.
A proper fix for this would be to have a better dumb buffer allocation API,
but for the time being, let's do it that way.
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
|
|
When allocating a dumb buffer for a format with multiple plane, we need to
account for all plane's bpp in order to allocate the proper size.
Let's add all the planes bpp and use the result to allocate our buffer.
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
|
|
Since we want to use the dumb buffers to store frames in formats with
multiple planes, we need to add checks for unsupported corner cases, and we
need to calculate the offsets and sizes of each planes. Let's use
calc_fb_size for that.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
|
|
The else condition is not needed, since all the other conditions return
when they are done.
Move the KMS dumb buffer allocation outside of the outer else condition,
this will also allow to ease later changes.
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
|
|
If the VRR tests failed then there was a chance that VRR could be
left enabled when exiting the test so the VRR_ENABLED property was
reset to 0 whenever the pipe was reset.
However, in doing so the pipe's state was considered changed even
if VRR_ENABLED was already 0. This causes the pipe to be added to
commits where it previously wasn't.
Other tests with properties that can persist for failures (like color
management) don't bother resetting the properties - so this patch
changes VRR_ENABLED to work the same.
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Petri Latvala <petri.latvala@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109490
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
|
|
Preliminary patches for the YUV testing series were broken without
subsequent patches that fix them when moving things around.
The argument provided to clear_yuv_buffer should be the framebuffer,
not the DRM file descriptor (fb vs fd). Also, an assert was added to
clear_yuv_buffer to ensure that it's only called for YUV formats,
which has to be reflected in the calling function.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com>
|
|
The YUV buffer allocation path for the i915 driver also has some code to
clear a YUV buffer.
As that is going to be useful for all the other drivers, let's move it to
a separate function.
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
|
|
The current way we work when we want to support a new YUV format to IGT, we
also need to add new function to convert to and from XRGB8888.
This doesn't really scale however, and creates a lot of code to maintain.
In order to work around this, create a generic function to convert to RGB
and one to convert from RGB.
The only thing that is needed now is to add new parameters, and that's it.
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Acked-by: Lyude Paul <lyude@redhat.com>
|
|
Aligning the width on 64 pixels only make sense on intel platforms, make
sure to add a check against this.
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
|
|
In order to improve the YUV support, let's add the horizontal and vertical
subsampling parameters to the IGT formats.
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
|
|
On Icelake we need to turn off subslices not containing the VME block or
the VME kernel will hang.
v2: (Tvrtko Ursulin)
* Remove libdrm usage for setting context param.
* Cleanup bitmask operation.
* Only apply the workaround for ICL.
v3: (Tvrtko Ursulin)
* Added hang detector. (Chris Wilson)
v4: (Tvrtko Ursulin)
* Rebase for hang detector moved to previous patch.
* Tidy curly braces.
v5: (Tvrtko Ursulin)
* Whitespace tidy. (Joonas)
Signed-off-by: Tony Ye <tony.ye@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Tony Ye <tony.ye@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Simple test which exercises the VME fixed function block.
v2: (Tvrtko Ursulin)
* Small cleanups like copyright date, tabs, remove unused bits.
v3: (Tony Ye)
* Added curbe data entry for dst surface.
* Read the dst surface after the VME kernel being executed.
v4: (Tony Ye)
* Added the media_vme.gxa kernel source code and compile instructions.
v5: (Tvrtko Ursulin)
* Added hang detector.
v6: (Tvrtko Ursulin)
* Replace gem_read with gem_sync. (Chris Wilson)
Signed-off-by: Tony Ye <tony.ye@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Tony Ye <tony.ye@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Add more PCI Device IDs for Coffee Lake and Ice Lake.
Align with kernel commits:
5e0f5a58b167 ("drm/i915/cfl: Adding another PCI Device ID.")
03ca3cf8e9aa ("drm/i915/icl: Adding few more device IDs for Ice Lake")
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
|
|
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
correctly.
We used to add them all 1 by 1, but we really only care about not
handling a few.
Only skip unsetting all atomic properties, instead of handling it
through a whitelist.
This fixes kms_busy, which was updating the VRR hint, even though
we already unset it in the legacy path.
Cc: Nicholas Kazlauskas <nkazlaus@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109490
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Petri Latvala <petri.latvala@intel.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
|
|
Use psr.can_test to determine we can disable PSR, and not skip because
PSR is unavailable.
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
|
|
Using an undefined int not in the enum is undefined. Use -1 and change
mode to an integer.
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
|
|
Skip trying to stop unused fork helpers to avoid the various asserts
that they were running and didn't die early.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109468
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
|
|
Eric is using meson nowadays.
v2: Fix up the test filter, meson lists now contain more than in the
automake lists.
Cc: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Acked-by: Petri Latvala <petri.latvala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
|
|
We're not using automake to build tarballs anymore.
Acked-by: Petri Latvala <petri.latvala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
|
|
There are 3 tests for basic variable refresh rate functionality.
The tests measure flipping at the average between the current mode
refresh rate and the minimum supported variable refresh rate.
It tests that VRR is enabled and that the difference between flip
timestamps converges to the requested rate. It also tests this under
both S3 and DPMS.
Potential ideas for future tests:
- Test behavior inside VRR range with a stepping test
- Test behavior outside of VRR range
- Multi-monitor (limited by no async pageflips in DRM atomic API)
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
|
|
x86_features_to_string() uses a repeatable pattern that increments a
pointer for each feature string, leaving a dead assignment for the
last one. Add a (void)line to the end just to silence static analysis.
Signed-off-by: Petri Latvala <petri.latvala@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
|
|
If we first find n amount of ':' in a string, the amount is still n
when we walk through it the second time.
Signed-off-by: Petri Latvala <petri.latvala@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
|
|
Signed-off-by: Petri Latvala <petri.latvala@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
|
