Merge remote-tracking branch 'sound-asoc/for-next'

10 files changed, 142 insertions, 10 deletions

diff --git a/Documentation/devicetree/bindings/misc/atmel-ssc.txt b/Documentation/devicetree/bindings/misc/atmel-ssc.txt
index efc98ea1f23d..f8629bb73945 100644
--- a/Documentation/devicetree/bindings/misc/atmel-ssc.txt
+++ b/Documentation/devicetree/bindings/misc/atmel-ssc.txt
@@ -24,6 +24,8 @@ Optional properties:
        this parameter to choose where the clock from.
      - By default the clock is from TK pin, if the clock from RK pin, this
        property is needed.
+  - #sound-dai-cells: Should contain <0>.
+     - This property makes the SSC into an automatically registered DAI.
 
 Examples:
 - PDC transfer:
diff --git a/Documentation/devicetree/bindings/sound/axentia,tse850-pcm5142.txt b/Documentation/devicetree/bindings/sound/axentia,tse850-pcm5142.txt
index 5b9b38f578bb..fdb25b492514 100644
--- a/Documentation/devicetree/bindings/sound/axentia,tse850-pcm5142.txt
+++ b/Documentation/devicetree/bindings/sound/axentia,tse850-pcm5142.txt
@@ -2,8 +2,7 @@ Devicetree bindings for the Axentia TSE-850 audio complex
 
 Required properties:
   - compatible: "axentia,tse850-pcm5142"
-  - axentia,ssc-controller: The phandle of the atmel SSC controller used as
-    cpu dai.
+  - axentia,cpu-dai: The phandle of the cpu dai.
   - axentia,audio-codec: The phandle of the PCM5142 codec.
   - axentia,add-gpios: gpio specifier that controls the mixer.
   - axentia,loop1-gpios: gpio specifier that controls loop relays on channel 1.
@@ -43,6 +42,12 @@ the PCM5142 codec.
 
 Example:
 
+	&ssc0 {
+		#sound-dai-cells = <0>;
+
+		status = "okay";
+	};
+
 	&i2c {
 		codec: pcm5142@4c {
 			compatible = "ti,pcm5142";
@@ -77,7 +82,7 @@ Example:
 	sound {
 		compatible = "axentia,tse850-pcm5142";
 
-		axentia,ssc-controller = <&ssc0>;
+		axentia,cpu-dai = <&ssc0>;
 		axentia,audio-codec = <&codec>;
 
 		axentia,add-gpios = <&pioA 8 GPIO_ACTIVE_LOW>;
diff --git a/Documentation/devicetree/bindings/sound/es8328.txt b/Documentation/devicetree/bindings/sound/es8328.txt
index 30ea8a318ae9..33fbf058c997 100644
--- a/Documentation/devicetree/bindings/sound/es8328.txt
+++ b/Documentation/devicetree/bindings/sound/es8328.txt
@@ -4,7 +4,7 @@ This device supports both I2C and SPI.
 
 Required properties:
 
-  - compatible : "everest,es8328"
+  - compatible  : Should be "everest,es8328" or "everest,es8388"
   - DVDD-supply : Regulator providing digital core supply voltage 1.8 - 3.6V
   - AVDD-supply : Regulator providing analog supply voltage 3.3V
   - PVDD-supply : Regulator providing digital IO supply voltage 1.8 - 3.6V
diff --git a/Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt b/Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt
index 3e623a724e55..9800a560e0c2 100644
--- a/Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt
+++ b/Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt
@@ -4,6 +4,7 @@ Required properties:
 - compatible = "mediatek,mt2701-audio";
 - reg: register location and size
 - interrupts: Should contain AFE interrupt
+- power-domains: should define the power domain
 - clock-names: should have these clock names:
 		"infra_sys_audio_clk",
 		"top_audio_mux1_sel",
@@ -58,6 +59,7 @@ Example:
 		      <0 0x112A0000 0 0x20000>;
 		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
 			     <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>;
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
 		clocks = <&infracfg CLK_INFRA_AUDIO>,
 			 <&topckgen CLK_TOP_AUD_MUX1_SEL>,
 			 <&topckgen CLK_TOP_AUD_MUX2_SEL>,
diff --git a/Documentation/devicetree/bindings/sound/nau8540.txt b/Documentation/devicetree/bindings/sound/nau8540.txt
new file mode 100644
index 000000000000..307a76528320
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nau8540.txt
@@ -0,0 +1,16 @@
+NAU85L40 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+  - compatible : "nuvoton,nau8540"
+
+  - reg : the I2C address of the device.
+
+Example:
+
+codec: nau8540@1c {
+       compatible = "nuvoton,nau8540";
+       reg = <0x1c>;
+};
diff --git a/Documentation/devicetree/bindings/sound/rockchip,rk3288-hdmi-analog.txt b/Documentation/devicetree/bindings/sound/rockchip,rk3288-hdmi-analog.txt
new file mode 100644
index 000000000000..2539e1d68107
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/rockchip,rk3288-hdmi-analog.txt
@@ -0,0 +1,36 @@
+ROCKCHIP RK3288 with HDMI and analog audio
+
+Required properties:
+- compatible: "rockchip,rk3288-hdmi-analog"
+- rockchip,model: The user-visible name of this sound complex
+- rockchip,i2s-controller: The phandle of the Rockchip I2S controller that's
+  connected to the CODEC
+- rockchip,audio-codec: The phandle of the analog audio codec.
+- rockchip,routing: A list of the connections between audio components.
+		    Each entry is a pair of strings, the first being the
+		    connection's sink, the second being the connection's
+		    source. For this driver the first string should always be
+		    "Analog".
+
+Optionnal properties:
+- rockchip,hp-en-gpios = The phandle of the GPIO that power up/down the
+  headphone (when the analog output is an headphone).
+- rockchip,hp-det-gpios = The phandle of the GPIO that detects the headphone
+  (when the analog output is an headphone).
+- pinctrl-names, pinctrl-0: Please refer to pinctrl-bindings.txt
+
+Example:
+
+sound {
+	compatible = "rockchip,rockchip-audio-es8388";
+	rockchip,model = "Analog audio output";
+	rockchip,i2s-controller = <&i2s>;
+	rockchip,audio-codec = <&es8388>;
+	rockchip,routing = "Analog", "LOUT2",
+			   "Analog", "ROUT2";
+	rockchip,hp-en-gpios = <&gpio8 0 GPIO_ACTIVE_HIGH>;
+	rockchip,hp-det-gpios = <&gpio7 7 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&headphone>;
+};
+
diff --git a/Documentation/devicetree/bindings/sound/sun4i-i2s.txt b/Documentation/devicetree/bindings/sound/sun4i-i2s.txt
index 7b526ec64991..f4adc58f82ba 100644
--- a/Documentation/devicetree/bindings/sound/sun4i-i2s.txt
+++ b/Documentation/devicetree/bindings/sound/sun4i-i2s.txt
@@ -7,6 +7,7 @@ Required properties:
 
 - compatible: should be one of the followings
    - "allwinner,sun4i-a10-i2s"
+   - "allwinner,sun6i-a31-i2s"
 - reg: physical base address of the controller and length of memory mapped
   region.
 - interrupts: should contain the I2S interrupt.
@@ -19,6 +20,10 @@ Required properties:
    - "mod" : module clock for the I2S controller
 - #sound-dai-cells : Must be equal to 0
 
+Required properties for the following compatibles:
+	- "allwinner,sun6i-a31-i2s"
+- resets: phandle to the reset line for this codec
+
 Example:
 
 i2s0: i2s@01c22400 {
diff --git a/Documentation/devicetree/bindings/sound/sun8i-a33-codec.txt b/Documentation/devicetree/bindings/sound/sun8i-a33-codec.txt
new file mode 100644
index 000000000000..399b1b4bae22
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/sun8i-a33-codec.txt
@@ -0,0 +1,63 @@
+Allwinner SUN8I audio codec
+------------------------------------
+
+On Sun8i-A33 SoCs, the audio is separated in different parts:
+	  - A DAI driver. It uses the "sun4i-i2s" driver which is
+	  documented here:
+	  Documentation/devicetree/bindings/sound/sun4i-i2s.txt
+	  - An analog part of the codec which is handled as PRCM registers.
+	  See Documentation/devicetree/bindings/sound/sun8i-codec-analog.txt
+	  - An digital part of the codec which is documented in this current
+	  binding documentation.
+	  - And finally, an audio card which links all the above components.
+	  The simple-audio card will be used.
+	  See Documentation/devicetree/bindings/sound/simple-card.txt
+
+This bindings documentation exposes Sun8i codec (digital part).
+
+Required properties:
+- compatible: must be "allwinner,sun8i-a33-codec"
+- reg: must contain the registers location and length
+- interrupts: must contain the codec interrupt
+- clocks: a list of phandle + clock-specifer pairs, one for each entry
+  in clock-names.
+- clock-names: should contain followings:
+   - "bus": the parent APB clock for this controller
+   - "mod": the parent module clock
+
+Here is an example to add a sound card and the codec binding on sun8i SoCs that
+are similar to A33 using simple-card:
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "sun8i-a33-audio";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&link_codec>;
+		simple-audio-card,bitclock-master = <&link_codec>;
+		simple-audio-card,mclk-fs = <512>;
+		simple-audio-card,aux-devs = <&codec_analog>;
+		simple-audio-card,routing =
+				"Left DAC", "Digital Left DAC",
+				"Right DAC", "Digital Right DAC";
+
+		simple-audio-card,cpu {
+			sound-dai = <&dai>;
+		};
+
+		link_codec: simple-audio-card,codec {
+			sound-dai = <&codec>;
+		};
+
+	soc@01c00000 {
+		[...]
+
+		audio-codec@1c22e00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-a33-codec";
+			reg = <0x01c22e00 0x400>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
+			clock-names = "bus", "mod";
+		};
+	};
+
diff --git a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
index 0230c4d20506..fe0a65e6d629 100644
--- a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
+++ b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
@@ -10,6 +10,7 @@ Required properties:
   - compatible		: should be one of the following:
     - "allwinner,sun4i-a10-spdif": for the Allwinner A10 SoC
     - "allwinner,sun6i-a31-spdif": for the Allwinner A31 SoC
+    - "allwinner,sun8i-h3-spdif": for the Allwinner H3 SoC
 
   - reg			: Offset and length of the register set for the device.
 
diff --git a/Documentation/devicetree/bindings/sound/zte,zx-i2s.txt b/Documentation/devicetree/bindings/sound/zte,zx-i2s.txt
index 7e5aa6f6b5a1..292ad5083704 100644
--- a/Documentation/devicetree/bindings/sound/zte,zx-i2s.txt
+++ b/Documentation/devicetree/bindings/sound/zte,zx-i2s.txt
@@ -1,10 +1,12 @@
 ZTE ZX296702 I2S controller
 
 Required properties:
- - compatible : Must be "zte,zx296702-i2s"
+ - compatible : Must be one of:
+	"zte,zx296718-i2s", "zte,zx296702-i2s"
+	"zte,zx296702-i2s"
  - reg : Must contain I2S core's registers location and length
  - clocks : Pairs of phandle and specifier referencing the controller's clocks.
- - clock-names: "tx" for the clock to the I2S interface.
+ - clock-names: "wclk" for the wclk, "pclk" for the pclk to the I2S interface.
  - dmas: Pairs of phandle and specifier for the DMA channel that is used by
    the core. The core expects two dma channels for transmit.
  - dma-names : Must be "tx" and "rx"
@@ -16,12 +18,12 @@ please check:
 	* dma/dma.txt
 
 Example:
-	i2s0: i2s0@0b005000 {
+	i2s0: i2s@b005000 {
 		#sound-dai-cells = <0>;
-		compatible = "zte,zx296702-i2s";
+		compatible = "zte,zx296718-i2s", "zte,zx296702-i2s";
 		reg = <0x0b005000 0x1000>;
-		clocks = <&lsp0clk ZX296702_I2S0_DIV>;
-		clock-names = "tx";
+		clocks = <&audiocrm AUDIO_I2S0_WCLK>, <&audiocrm AUDIO_I2S0_PCLK>;
+		clock-names = "wclk", "pclk";
 		interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
 		dmas = <&dma 5>, <&dma 6>;
 		dma-names = "tx", "rx";