summaryrefslogtreecommitdiff
path: root/drivers/net/wireless
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless')
-rw-r--r--drivers/net/wireless/ath/ath9k/ani.c4
-rw-r--r--drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c2
-rw-r--r--drivers/net/wireless/intel/ipw2x00/ipw2100.c6
-rw-r--r--drivers/net/wireless/intel/ipw2x00/ipw2200.c4
-rw-r--r--drivers/net/wireless/intel/iwlegacy/4965-mac.c30
-rw-r--r--drivers/net/wireless/intel/iwlwifi/iwl-drv.c16
-rw-r--r--drivers/net/wireless/marvell/mwifiex/wmm.c4
-rw-r--r--drivers/net/wireless/realtek/rtlwifi/rtl8192se/fw.c4
-rw-r--r--drivers/net/wireless/rsi/rsi_91x_usb.c2
-rw-r--r--drivers/net/wireless/ti/wl18xx/main.c2
-rw-r--r--drivers/net/wireless/ti/wlcore/init.c2
11 files changed, 38 insertions, 38 deletions
diff --git a/drivers/net/wireless/ath/ath9k/ani.c b/drivers/net/wireless/ath/ath9k/ani.c
index 815efe9fd208..5214dd7a3936 100644
--- a/drivers/net/wireless/ath/ath9k/ani.c
+++ b/drivers/net/wireless/ath/ath9k/ani.c
@@ -59,13 +59,13 @@ static const struct ani_ofdm_level_entry ofdm_level_table[] = {
/*
* MRC (Maximal Ratio Combining) has always been used with multi-antenna ofdm.
* With OFDM for single stream you just add up all antenna inputs, you're
- * only interested in what you get after FFT. Signal aligment is also not
+ * only interested in what you get after FFT. Signal alignment is also not
* required for OFDM because any phase difference adds up in the frequency
* domain.
*
* MRC requires extra work for use with CCK. You need to align the antenna
* signals from the different antenna before you can add the signals together.
- * You need aligment of signals as CCK is in time domain, so addition can cancel
+ * You need alignment of signals as CCK is in time domain, so addition can cancel
* your signal completely if phase is 180 degrees (think of adding sine waves).
* You also need to remove noise before the addition and this is where ANI
* MRC CCK comes into play. One of the antenna inputs may be stronger but
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
index 10098b7586f3..944b83cfc519 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -4874,7 +4874,7 @@ brcmf_cfg80211_mgmt_tx(struct wiphy *wiphy, struct wireless_dev *wdev,
kfree(af_params);
} else {
brcmf_dbg(TRACE, "Unhandled, fc=%04x!!\n", mgmt->frame_control);
- brcmf_dbg_hex_dump(true, buf, len, "payload, len=%Zu\n", len);
+ brcmf_dbg_hex_dump(true, buf, len, "payload, len=%zu\n", len);
}
exit:
diff --git a/drivers/net/wireless/intel/ipw2x00/ipw2100.c b/drivers/net/wireless/intel/ipw2x00/ipw2100.c
index 356aba9d3d53..f922859acf40 100644
--- a/drivers/net/wireless/intel/ipw2x00/ipw2100.c
+++ b/drivers/net/wireless/intel/ipw2x00/ipw2100.c
@@ -1238,7 +1238,7 @@ static int ipw2100_get_hw_features(struct ipw2100_priv *priv)
}
/*
- * Start firmware execution after power on and intialization
+ * Start firmware execution after power on and initialization
* The sequence is:
* 1. Release ARC
* 2. Wait for f/w initialization completes;
@@ -1277,7 +1277,7 @@ static int ipw2100_start_adapter(struct ipw2100_priv *priv)
/* Release ARC - clear reset bit */
write_register(priv->net_dev, IPW_REG_RESET_REG, 0);
- /* wait for f/w intialization complete */
+ /* wait for f/w initialization complete */
IPW_DEBUG_FW("Waiting for f/w initialization to complete...\n");
i = 5000;
do {
@@ -5652,7 +5652,7 @@ static void shim__set_security(struct net_device *dev,
/* As a temporary work around to enable WPA until we figure out why
* wpa_supplicant toggles the security capability of the driver, which
- * forces a disassocation with force_update...
+ * forces a disassociation with force_update...
*
* if (force_update || !(priv->status & STATUS_ASSOCIATED))*/
if (!(priv->status & (STATUS_ASSOCIATED | STATUS_ASSOCIATING)))
diff --git a/drivers/net/wireless/intel/ipw2x00/ipw2200.c b/drivers/net/wireless/intel/ipw2x00/ipw2200.c
index ef9af8a29cad..5ef3c5cc47c5 100644
--- a/drivers/net/wireless/intel/ipw2x00/ipw2200.c
+++ b/drivers/net/wireless/intel/ipw2x00/ipw2200.c
@@ -3974,7 +3974,7 @@ static void ipw_send_disassociate(struct ipw_priv *priv, int quiet)
return;
}
- IPW_DEBUG_ASSOC("Disassocation attempt from %pM "
+ IPW_DEBUG_ASSOC("Disassociation attempt from %pM "
"on channel %d.\n",
priv->assoc_request.bssid,
priv->assoc_request.channel);
@@ -5196,7 +5196,7 @@ static void ipw_rx_queue_restock(struct ipw_priv *priv)
* Move all used packet from rx_used to rx_free, allocating a new SKB for each.
* Also restock the Rx queue via ipw_rx_queue_restock.
*
- * This is called as a scheduled work item (except for during intialization)
+ * This is called as a scheduled work item (except for during initialization)
*/
static void ipw_rx_queue_replenish(void *data)
{
diff --git a/drivers/net/wireless/intel/iwlegacy/4965-mac.c b/drivers/net/wireless/intel/iwlegacy/4965-mac.c
index a91d170a614b..2781f5728d07 100644
--- a/drivers/net/wireless/intel/iwlegacy/4965-mac.c
+++ b/drivers/net/wireless/intel/iwlegacy/4965-mac.c
@@ -4855,39 +4855,39 @@ il4965_ucode_callback(const struct firmware *ucode_raw, void *context)
*/
D_INFO("f/w package hdr ucode version raw = 0x%x\n", il->ucode_ver);
- D_INFO("f/w package hdr runtime inst size = %Zd\n", pieces.inst_size);
- D_INFO("f/w package hdr runtime data size = %Zd\n", pieces.data_size);
- D_INFO("f/w package hdr init inst size = %Zd\n", pieces.init_size);
- D_INFO("f/w package hdr init data size = %Zd\n", pieces.init_data_size);
- D_INFO("f/w package hdr boot inst size = %Zd\n", pieces.boot_size);
+ D_INFO("f/w package hdr runtime inst size = %zd\n", pieces.inst_size);
+ D_INFO("f/w package hdr runtime data size = %zd\n", pieces.data_size);
+ D_INFO("f/w package hdr init inst size = %zd\n", pieces.init_size);
+ D_INFO("f/w package hdr init data size = %zd\n", pieces.init_data_size);
+ D_INFO("f/w package hdr boot inst size = %zd\n", pieces.boot_size);
/* Verify that uCode images will fit in card's SRAM */
if (pieces.inst_size > il->hw_params.max_inst_size) {
- IL_ERR("uCode instr len %Zd too large to fit in\n",
+ IL_ERR("uCode instr len %zd too large to fit in\n",
pieces.inst_size);
goto try_again;
}
if (pieces.data_size > il->hw_params.max_data_size) {
- IL_ERR("uCode data len %Zd too large to fit in\n",
+ IL_ERR("uCode data len %zd too large to fit in\n",
pieces.data_size);
goto try_again;
}
if (pieces.init_size > il->hw_params.max_inst_size) {
- IL_ERR("uCode init instr len %Zd too large to fit in\n",
+ IL_ERR("uCode init instr len %zd too large to fit in\n",
pieces.init_size);
goto try_again;
}
if (pieces.init_data_size > il->hw_params.max_data_size) {
- IL_ERR("uCode init data len %Zd too large to fit in\n",
+ IL_ERR("uCode init data len %zd too large to fit in\n",
pieces.init_data_size);
goto try_again;
}
if (pieces.boot_size > il->hw_params.max_bsm_size) {
- IL_ERR("uCode boot instr len %Zd too large to fit in\n",
+ IL_ERR("uCode boot instr len %zd too large to fit in\n",
pieces.boot_size);
goto try_again;
}
@@ -4938,7 +4938,7 @@ il4965_ucode_callback(const struct firmware *ucode_raw, void *context)
/* Copy images into buffers for card's bus-master reads ... */
/* Runtime instructions (first block of data in file) */
- D_INFO("Copying (but not loading) uCode instr len %Zd\n",
+ D_INFO("Copying (but not loading) uCode instr len %zd\n",
pieces.inst_size);
memcpy(il->ucode_code.v_addr, pieces.inst, pieces.inst_size);
@@ -4949,28 +4949,28 @@ il4965_ucode_callback(const struct firmware *ucode_raw, void *context)
* Runtime data
* NOTE: Copy into backup buffer will be done in il_up()
*/
- D_INFO("Copying (but not loading) uCode data len %Zd\n",
+ D_INFO("Copying (but not loading) uCode data len %zd\n",
pieces.data_size);
memcpy(il->ucode_data.v_addr, pieces.data, pieces.data_size);
memcpy(il->ucode_data_backup.v_addr, pieces.data, pieces.data_size);
/* Initialization instructions */
if (pieces.init_size) {
- D_INFO("Copying (but not loading) init instr len %Zd\n",
+ D_INFO("Copying (but not loading) init instr len %zd\n",
pieces.init_size);
memcpy(il->ucode_init.v_addr, pieces.init, pieces.init_size);
}
/* Initialization data */
if (pieces.init_data_size) {
- D_INFO("Copying (but not loading) init data len %Zd\n",
+ D_INFO("Copying (but not loading) init data len %zd\n",
pieces.init_data_size);
memcpy(il->ucode_init_data.v_addr, pieces.init_data,
pieces.init_data_size);
}
/* Bootstrap instructions */
- D_INFO("Copying (but not loading) boot instr len %Zd\n",
+ D_INFO("Copying (but not loading) boot instr len %zd\n",
pieces.boot_size);
memcpy(il->ucode_boot.v_addr, pieces.boot, pieces.boot_size);
diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-drv.c b/drivers/net/wireless/intel/iwlwifi/iwl-drv.c
index 0e0293d42b5d..be466a074c1d 100644
--- a/drivers/net/wireless/intel/iwlwifi/iwl-drv.c
+++ b/drivers/net/wireless/intel/iwlwifi/iwl-drv.c
@@ -1141,21 +1141,21 @@ static int validate_sec_sizes(struct iwl_drv *drv,
struct iwl_firmware_pieces *pieces,
const struct iwl_cfg *cfg)
{
- IWL_DEBUG_INFO(drv, "f/w package hdr runtime inst size = %Zd\n",
+ IWL_DEBUG_INFO(drv, "f/w package hdr runtime inst size = %zd\n",
get_sec_size(pieces, IWL_UCODE_REGULAR,
IWL_UCODE_SECTION_INST));
- IWL_DEBUG_INFO(drv, "f/w package hdr runtime data size = %Zd\n",
+ IWL_DEBUG_INFO(drv, "f/w package hdr runtime data size = %zd\n",
get_sec_size(pieces, IWL_UCODE_REGULAR,
IWL_UCODE_SECTION_DATA));
- IWL_DEBUG_INFO(drv, "f/w package hdr init inst size = %Zd\n",
+ IWL_DEBUG_INFO(drv, "f/w package hdr init inst size = %zd\n",
get_sec_size(pieces, IWL_UCODE_INIT, IWL_UCODE_SECTION_INST));
- IWL_DEBUG_INFO(drv, "f/w package hdr init data size = %Zd\n",
+ IWL_DEBUG_INFO(drv, "f/w package hdr init data size = %zd\n",
get_sec_size(pieces, IWL_UCODE_INIT, IWL_UCODE_SECTION_DATA));
/* Verify that uCode images will fit in card's SRAM. */
if (get_sec_size(pieces, IWL_UCODE_REGULAR, IWL_UCODE_SECTION_INST) >
cfg->max_inst_size) {
- IWL_ERR(drv, "uCode instr len %Zd too large to fit in\n",
+ IWL_ERR(drv, "uCode instr len %zd too large to fit in\n",
get_sec_size(pieces, IWL_UCODE_REGULAR,
IWL_UCODE_SECTION_INST));
return -1;
@@ -1163,7 +1163,7 @@ static int validate_sec_sizes(struct iwl_drv *drv,
if (get_sec_size(pieces, IWL_UCODE_REGULAR, IWL_UCODE_SECTION_DATA) >
cfg->max_data_size) {
- IWL_ERR(drv, "uCode data len %Zd too large to fit in\n",
+ IWL_ERR(drv, "uCode data len %zd too large to fit in\n",
get_sec_size(pieces, IWL_UCODE_REGULAR,
IWL_UCODE_SECTION_DATA));
return -1;
@@ -1171,7 +1171,7 @@ static int validate_sec_sizes(struct iwl_drv *drv,
if (get_sec_size(pieces, IWL_UCODE_INIT, IWL_UCODE_SECTION_INST) >
cfg->max_inst_size) {
- IWL_ERR(drv, "uCode init instr len %Zd too large to fit in\n",
+ IWL_ERR(drv, "uCode init instr len %zd too large to fit in\n",
get_sec_size(pieces, IWL_UCODE_INIT,
IWL_UCODE_SECTION_INST));
return -1;
@@ -1179,7 +1179,7 @@ static int validate_sec_sizes(struct iwl_drv *drv,
if (get_sec_size(pieces, IWL_UCODE_INIT, IWL_UCODE_SECTION_DATA) >
cfg->max_data_size) {
- IWL_ERR(drv, "uCode init data len %Zd too large to fit in\n",
+ IWL_ERR(drv, "uCode init data len %zd too large to fit in\n",
get_sec_size(pieces, IWL_UCODE_REGULAR,
IWL_UCODE_SECTION_DATA));
return -1;
diff --git a/drivers/net/wireless/marvell/mwifiex/wmm.c b/drivers/net/wireless/marvell/mwifiex/wmm.c
index 28c2f6fae3e6..e4ff3b973850 100644
--- a/drivers/net/wireless/marvell/mwifiex/wmm.c
+++ b/drivers/net/wireless/marvell/mwifiex/wmm.c
@@ -673,8 +673,8 @@ void mwifiex_update_ralist_tx_pause(struct mwifiex_private *priv, u8 *mac,
spin_unlock_irqrestore(&priv->wmm.ra_list_spinlock, flags);
}
-/* This function update non-tdls peer ralist tx_pause while
- * tdls channel swithing
+/* This function updates non-tdls peer ralist tx_pause while
+ * tdls channel switching
*/
void mwifiex_update_ralist_tx_pause_in_tdls_cs(struct mwifiex_private *priv,
u8 *mac, u8 tx_pause)
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/fw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/fw.c
index 1922e78ad6bd..89a0a28b8b20 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/fw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/fw.c
@@ -455,7 +455,7 @@ static u32 _rtl92s_fill_h2c_cmd(struct sk_buff *skb, u32 h2cbufferlen,
u8 i = 0;
do {
- /* 8 - Byte aligment */
+ /* 8 - Byte alignment */
len = H2C_TX_CMD_HDR_LEN + N_BYTE_ALIGMENT(pcmd_len[i], 8);
/* Buffer length is not enough */
@@ -504,7 +504,7 @@ static u32 _rtl92s_get_h2c_cmdlen(u32 h2cbufferlen, u32 cmd_num, u32 *pcmd_len)
u8 i = 0;
do {
- /* 8 - Byte aligment */
+ /* 8 - Byte alignment */
len = H2C_TX_CMD_HDR_LEN + N_BYTE_ALIGMENT(pcmd_len[i], 8);
/* Buffer length is not enough */
diff --git a/drivers/net/wireless/rsi/rsi_91x_usb.c b/drivers/net/wireless/rsi/rsi_91x_usb.c
index ef5d394f185b..cc8deecea8cb 100644
--- a/drivers/net/wireless/rsi/rsi_91x_usb.c
+++ b/drivers/net/wireless/rsi/rsi_91x_usb.c
@@ -516,7 +516,7 @@ err:
/**
* rsi_disconnect() - This function performs the reverse of the probe function,
- * it deintialize the driver structure.
+ * it deinitialize the driver structure.
* @pfunction: Pointer to the USB interface structure.
*
* Return: None.
diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c
index 5bdf7a03e3dd..d1aa3eee0e81 100644
--- a/drivers/net/wireless/ti/wl18xx/main.c
+++ b/drivers/net/wireless/ti/wl18xx/main.c
@@ -178,7 +178,7 @@ static struct wlcore_conf wl18xx_conf = {
.sg = {
.params = {
[WL18XX_CONF_SG_PARAM_0] = 0,
- /* Configuartion Parameters */
+ /* Configuration Parameters */
[WL18XX_CONF_SG_ANTENNA_CONFIGURATION] = 0,
[WL18XX_CONF_SG_ZIGBEE_COEX] = 0,
[WL18XX_CONF_SG_TIME_SYNC] = 0,
diff --git a/drivers/net/wireless/ti/wlcore/init.c b/drivers/net/wireless/ti/wlcore/init.c
index d0b7734030ef..58898b99d3f7 100644
--- a/drivers/net/wireless/ti/wlcore/init.c
+++ b/drivers/net/wireless/ti/wlcore/init.c
@@ -544,7 +544,7 @@ static int wl12xx_init_sta_role(struct wl1271 *wl, struct wl12xx_vif *wlvif)
return 0;
}
-/* vif-specific intialization */
+/* vif-specific initialization */
static int wl12xx_init_ap_role(struct wl1271 *wl, struct wl12xx_vif *wlvif)
{
int ret;
generated by cgit v1.2.3 (git 2.39.1) at 2024-06-15 17:52:18 +0000