summaryrefslogtreecommitdiff
path: root/drivers/scsi
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi')
-rw-r--r--drivers/scsi/aacraid/linit.c2
-rw-r--r--drivers/scsi/aic7xxx/aic79xx_core.c2
-rw-r--r--drivers/scsi/bfa/bfi_ms.h2
-rw-r--r--drivers/scsi/fcoe/fcoe_ctlr.c2
-rw-r--r--drivers/scsi/ipr.c2
-rw-r--r--drivers/scsi/lpfc/lpfc_attr.c2
-rw-r--r--drivers/scsi/lpfc/lpfc_sli.c18
-rw-r--r--drivers/scsi/mpt3sas/mpt3sas_ctl.c2
-rw-r--r--drivers/scsi/mpt3sas/mpt3sas_ctl.h2
-rw-r--r--drivers/scsi/osd/osd_initiator.c4
-rw-r--r--drivers/scsi/osst.c6
-rw-r--r--drivers/scsi/qla2xxx/qla_init.c10
-rw-r--r--drivers/scsi/scsi_transport_sas.c2
-rw-r--r--drivers/scsi/storvsc_drv.c2
14 files changed, 29 insertions, 29 deletions
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index 137d22d3a005..838347c44f32 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -1630,7 +1630,7 @@ static int aac_acquire_resources(struct aac_dev *dev)
if (!dev->sync_mode) {
/* After EEH recovery or suspend resume, max_msix count
- * may change, therfore updating in init as well.
+ * may change, therefore updating in init as well.
*/
dev->init->r7.no_of_msix_vectors = cpu_to_le32(dev->max_msix);
aac_adapter_start(dev);
diff --git a/drivers/scsi/aic7xxx/aic79xx_core.c b/drivers/scsi/aic7xxx/aic79xx_core.c
index 109e2c99e6c1..95d8f25cbcca 100644
--- a/drivers/scsi/aic7xxx/aic79xx_core.c
+++ b/drivers/scsi/aic7xxx/aic79xx_core.c
@@ -6278,7 +6278,7 @@ ahd_reset(struct ahd_softc *ahd, int reinit)
* does not disable its parity logic prior to
* the start of the reset. This may cause a
* parity error to be detected and thus a
- * spurious SERR or PERR assertion. Disble
+ * spurious SERR or PERR assertion. Disable
* PERR and SERR responses during the CHIPRST.
*/
mod_cmd = cmd & ~(PCIM_CMD_PERRESPEN|PCIM_CMD_SERRESPEN);
diff --git a/drivers/scsi/bfa/bfi_ms.h b/drivers/scsi/bfa/bfi_ms.h
index ae5bfe039fcc..ccbd9e31a5de 100644
--- a/drivers/scsi/bfa/bfi_ms.h
+++ b/drivers/scsi/bfa/bfi_ms.h
@@ -680,7 +680,7 @@ struct bfi_ioim_req_s {
/*
* SG elements array within the IO request must be double word
- * aligned. This aligment is required to optimize SGM setup for the IO.
+ * aligned. This alignment is required to optimize SGM setup for the IO.
*/
struct bfi_sge_s sges[BFI_SGE_INLINE_MAX];
u8 io_timeout;
diff --git a/drivers/scsi/fcoe/fcoe_ctlr.c b/drivers/scsi/fcoe/fcoe_ctlr.c
index cea57e27e713..656463ff9ccb 100644
--- a/drivers/scsi/fcoe/fcoe_ctlr.c
+++ b/drivers/scsi/fcoe/fcoe_ctlr.c
@@ -1387,7 +1387,7 @@ static void fcoe_ctlr_recv_clr_vlink(struct fcoe_ctlr *fip,
/*
* Actually need to subtract 'sizeof(*mp) - sizeof(*wp)' from 'rlen'
* before determining max Vx_Port descriptor but a buggy FCF could have
- * omited either or both MAC Address and Name Identifier descriptors
+ * omitted either or both MAC Address and Name Identifier descriptors
*/
num_vlink_desc = rlen / sizeof(*vp);
if (num_vlink_desc)
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index 835c59c777f2..b29afafc2885 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -9330,7 +9330,7 @@ static pci_ers_result_t ipr_pci_error_detected(struct pci_dev *pdev,
* ipr_probe_ioa_part2 - Initializes IOAs found in ipr_probe_ioa(..)
* @ioa_cfg: ioa cfg struct
*
- * Description: This is the second phase of adapter intialization
+ * Description: This is the second phase of adapter initialization
* This function takes care of initilizing the adapter to the point
* where it can accept new commands.
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 50cf402dea29..03cb05abc821 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -3329,7 +3329,7 @@ static DEVICE_ATTR(lpfc_static_vport, S_IRUGO,
* @buf: Data buffer.
* @count: Size of the data buffer.
*
- * This function get called when an user write to the lpfc_stat_data_ctrl
+ * This function get called when a user write to the lpfc_stat_data_ctrl
* sysfs file. This function parse the command written to the sysfs file
* and take appropriate action. These commands are used for controlling
* driver statistical data collection.
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index d977a472f89f..8e886caf2454 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -4510,7 +4510,7 @@ lpfc_sli4_rb_setup(struct lpfc_hba *phba)
* @phba: Pointer to HBA context object.
* @sli_mode: sli mode - 2/3
*
- * This function is called by the sli intialization code path
+ * This function is called by the sli initialization code path
* to issue config_port mailbox command. This function restarts the
* HBA firmware and issues a config_port mailbox command to configure
* the SLI interface in the sli mode specified by sli_mode
@@ -4650,11 +4650,11 @@ do_prep_failed:
/**
- * lpfc_sli_hba_setup - SLI intialization function
+ * lpfc_sli_hba_setup - SLI initialization function
* @phba: Pointer to HBA context object.
*
- * This function is the main SLI intialization function. This function
- * is called by the HBA intialization code, HBA reset code and HBA
+ * This function is the main SLI initialization function. This function
+ * is called by the HBA initialization code, HBA reset code and HBA
* error attention handler code. Caller is not required to hold any
* locks. This function issues config_port mailbox command to configure
* the SLI, setup iocb rings and HBQ rings. In the end the function
@@ -6324,11 +6324,11 @@ lpfc_set_host_data(struct lpfc_hba *phba, LPFC_MBOXQ_t *mbox)
}
/**
- * lpfc_sli4_hba_setup - SLI4 device intialization PCI function
+ * lpfc_sli4_hba_setup - SLI4 device initialization PCI function
* @phba: Pointer to HBA context object.
*
- * This function is the main SLI4 device intialization PCI function. This
- * function is called by the HBA intialization code, HBA reset code and
+ * This function is the main SLI4 device initialization PCI function. This
+ * function is called by the HBA initialization code, HBA reset code and
* HBA error attention handler code. Caller is not required to hold any
* locks.
**/
@@ -12079,7 +12079,7 @@ lpfc_sli4_sp_handle_els_wcqe(struct lpfc_hba *phba, struct lpfc_queue *cq,
* @phba: Pointer to HBA context object.
* @wcqe: Pointer to work-queue completion queue entry.
*
- * This routine handles slow-path WQ entry comsumed event by invoking the
+ * This routine handles slow-path WQ entry consumed event by invoking the
* proper WQ release routine to the slow-path WQ.
**/
static void
@@ -12451,7 +12451,7 @@ lpfc_sli4_fp_handle_fcp_wcqe(struct lpfc_hba *phba, struct lpfc_queue *cq,
* @cq: Pointer to completion queue.
* @wcqe: Pointer to work-queue completion queue entry.
*
- * This routine handles an fast-path WQ entry comsumed event by invoking the
+ * This routine handles an fast-path WQ entry consumed event by invoking the
* proper WQ release routine to the slow-path WQ.
**/
static void
diff --git a/drivers/scsi/mpt3sas/mpt3sas_ctl.c b/drivers/scsi/mpt3sas/mpt3sas_ctl.c
index 02fe1c4aae2f..bdffb692bded 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_ctl.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_ctl.c
@@ -1925,7 +1925,7 @@ mpt3sas_send_diag_release(struct MPT3SAS_ADAPTER *ioc, u8 buffer_type,
*
* This allows ownership of the specified buffer to returned to the driver,
* allowing an application to read the buffer without fear that firmware is
- * overwritting information in the buffer.
+ * overwriting information in the buffer.
*/
static long
_ctl_diag_release(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
diff --git a/drivers/scsi/mpt3sas/mpt3sas_ctl.h b/drivers/scsi/mpt3sas/mpt3sas_ctl.h
index f3e17a8c1b07..a44046cff0f3 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_ctl.h
+++ b/drivers/scsi/mpt3sas/mpt3sas_ctl.h
@@ -390,7 +390,7 @@ struct mpt3_diag_query {
*
* This allows ownership of the specified buffer to returned to the driver,
* allowing an application to read the buffer without fear that firmware is
- * overwritting information in the buffer.
+ * overwriting information in the buffer.
*/
struct mpt3_diag_release {
struct mpt3_ioctl_header hdr;
diff --git a/drivers/scsi/osd/osd_initiator.c b/drivers/scsi/osd/osd_initiator.c
index 30b905080c61..6903f03c88af 100644
--- a/drivers/scsi/osd/osd_initiator.c
+++ b/drivers/scsi/osd/osd_initiator.c
@@ -1290,7 +1290,7 @@ int osd_req_add_get_attr_list(struct osd_request *or,
or->enc_get_attr.total_bytes = total_bytes;
OSD_DEBUG(
- "get_attr.total_bytes=%u(%u) enc_get_attr.total_bytes=%u(%Zu)\n",
+ "get_attr.total_bytes=%u(%u) enc_get_attr.total_bytes=%u(%zu)\n",
or->get_attr.total_bytes,
or->get_attr.total_bytes - _osd_req_sizeof_alist_header(or),
or->enc_get_attr.total_bytes,
@@ -1677,7 +1677,7 @@ int osd_finalize_request(struct osd_request *or,
}
} else {
/* TODO: I think that for the GET_ATTR command these 2 should
- * be reversed to keep them in execution order (for embeded
+ * be reversed to keep them in execution order (for embedded
* targets with low memory footprint)
*/
ret = _osd_req_finalize_set_attr_list(or);
diff --git a/drivers/scsi/osst.c b/drivers/scsi/osst.c
index 451de6c5e3c9..75ac662793a3 100644
--- a/drivers/scsi/osst.c
+++ b/drivers/scsi/osst.c
@@ -3435,7 +3435,7 @@ static ssize_t osst_write(struct file * filp, const char __user * buf, size_t co
/* Write must be integral number of blocks */
if (STp->block_size != 0 && (count % STp->block_size) != 0) {
- printk(KERN_ERR "%s:E: Write (%Zd bytes) not multiple of tape block size (%d%c).\n",
+ printk(KERN_ERR "%s:E: Write (%zd bytes) not multiple of tape block size (%d%c).\n",
name, count, STp->block_size<1024?
STp->block_size:STp->block_size/1024, STp->block_size<1024?'b':'k');
retval = (-EINVAL);
@@ -3756,7 +3756,7 @@ static ssize_t osst_read(struct file * filp, char __user * buf, size_t count, lo
if ((count % STp->block_size) != 0) {
printk(KERN_WARNING
- "%s:W: Read (%Zd bytes) not multiple of tape block size (%d%c).\n", name, count,
+ "%s:W: Read (%zd bytes) not multiple of tape block size (%d%c).\n", name, count,
STp->block_size<1024?STp->block_size:STp->block_size/1024, STp->block_size<1024?'b':'k');
}
@@ -3815,7 +3815,7 @@ static ssize_t osst_read(struct file * filp, char __user * buf, size_t count, lo
if (transfer == 0) {
printk(KERN_WARNING
- "%s:W: Nothing can be transferred, requested %Zd, tape block size (%d%c).\n",
+ "%s:W: Nothing can be transferred, requested %zd, tape block size (%d%c).\n",
name, count, STp->block_size < 1024?
STp->block_size:STp->block_size/1024,
STp->block_size<1024?'b':'k');
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index ac579fc5f202..32fb9007f137 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -6465,7 +6465,7 @@ qla2x00_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr)
/* Validate firmware image by checking version. */
if (blob->fw->size < 8 * sizeof(uint16_t)) {
ql_log(ql_log_fatal, vha, 0x0085,
- "Unable to verify integrity of firmware image (%Zd).\n",
+ "Unable to verify integrity of firmware image (%zd).\n",
blob->fw->size);
goto fail_fw_integrity;
}
@@ -6493,7 +6493,7 @@ qla2x00_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr)
if (blob->fw->size < fwclen) {
ql_log(ql_log_fatal, vha, 0x0088,
"Unable to verify integrity of firmware image "
- "(%Zd).\n", blob->fw->size);
+ "(%zd).\n", blob->fw->size);
goto fail_fw_integrity;
}
@@ -6574,7 +6574,7 @@ qla24xx_load_risc_blob(scsi_qla_host_t *vha, uint32_t *srisc_addr)
/* Validate firmware image by checking version. */
if (blob->fw->size < 8 * sizeof(uint32_t)) {
ql_log(ql_log_fatal, vha, 0x0093,
- "Unable to verify integrity of firmware image (%Zd).\n",
+ "Unable to verify integrity of firmware image (%zd).\n",
blob->fw->size);
return QLA_FUNCTION_FAILED;
}
@@ -6585,7 +6585,7 @@ qla24xx_load_risc_blob(scsi_qla_host_t *vha, uint32_t *srisc_addr)
(dcode[0] == 0 && dcode[1] == 0 && dcode[2] == 0 &&
dcode[3] == 0)) {
ql_log(ql_log_fatal, vha, 0x0094,
- "Unable to verify integrity of firmware image (%Zd).\n",
+ "Unable to verify integrity of firmware image (%zd).\n",
blob->fw->size);
ql_log(ql_log_fatal, vha, 0x0095,
"Firmware data: %08x %08x %08x %08x.\n",
@@ -6603,7 +6603,7 @@ qla24xx_load_risc_blob(scsi_qla_host_t *vha, uint32_t *srisc_addr)
if (blob->fw->size < fwclen) {
ql_log(ql_log_fatal, vha, 0x0096,
"Unable to verify integrity of firmware image "
- "(%Zd).\n", blob->fw->size);
+ "(%zd).\n", blob->fw->size);
return QLA_FUNCTION_FAILED;
}
diff --git a/drivers/scsi/scsi_transport_sas.c b/drivers/scsi/scsi_transport_sas.c
index 126a5ee00987..6910d73d0905 100644
--- a/drivers/scsi/scsi_transport_sas.c
+++ b/drivers/scsi/scsi_transport_sas.c
@@ -1467,7 +1467,7 @@ static void sas_end_device_release(struct device *dev)
}
/**
- * sas_rphy_initialize - common rphy intialization
+ * sas_rphy_initialize - common rphy initialization
* @rphy: rphy to initialise
*
* Used by both sas_end_device_alloc() and sas_expander_alloc() to
diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c
index 585e54f6512c..638e5f427c90 100644
--- a/drivers/scsi/storvsc_drv.c
+++ b/drivers/scsi/storvsc_drv.c
@@ -280,7 +280,7 @@ static const struct vmstor_protocol vmstor_protocols[] = {
/*
- * This structure is sent during the intialization phase to get the different
+ * This structure is sent during the initialization phase to get the different
* properties of the channel.
*/
generated by cgit v1.2.3 (git 2.39.1) at 2024-06-01 22:52:29 +0000