summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2017-02-17ARM64: tizen_tm2_defconfig: enable CONFIG_GEARVRtizen/vrAndi Shyti
Enable support for Samsung Gear VR Change-Id: I254b1aab8c254a53e21d4996b9b95dd6f8461a5d Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
2017-01-13arm64: dts: exynos5433-tm2: Adjust the minimum voltage for LITTLE coreChanwoo Choi
This patch adjusts the minimum voltage for LITTLE core because the requested minimum voltage is 750mV on the lowest frequency level. Change-Id: I335e89d71e45c10f43db7e2e14469c90f03c92b1 Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-12-27ARM64: dts: exynos5433-tm2(e): fix earjack key codesJoonyoung Shim
In Tizen 3.0, keycodes for earjack should be below. volume down: 114 volume up: 115 media key: 226 Change-Id: Ifc9c5c444980fcdc691daa0066966ba860cb9081 Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
2016-12-15ARM: tizen_{odroid,tm2}_defconfig: enable SECURITY_SMACK_APPEND_SIGNALSRafal Krypa
Change-Id: I2a6a9380323f780d327e5e57009ab2edc6aae399 Signed-off-by: Rafal Krypa <r.krypa@samsung.com>
2016-12-14ARM: defconfig: rinato: sync with v4.1.36 rebased treeSeung-Woo Kim
This patch is to sync rinato defconfig with v4.1.36 rebased tree. Change-Id: Ia299861792631dcd0dbe3fb0a78cf96ec954593e Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
2016-12-14ARM: defconfig: trats2: sync with v4.1.36 rebased treeSeung-Woo Kim
This patch is to sync trats2 defconfig with v4.1.36 rebased tree. Change-Id: Ib0a5eaf7fbed9ddeb1e8fed1941f8185b1001c86 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
2016-12-14ARM: defconfig: odroid: sync with v4.1.36 rebased treeSeung-Woo Kim
This patch is to sync odroid defconfig with v4.1.36 rebased tree. Change-Id: I6de9150678bb53ccf5ba2e319da2744fb472866a Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
2016-12-14arm64: defconfig: tm2: sync with v4.1.36 rebased treeSeung-Woo Kim
This patch is to sync tm2 defconfig with v4.1.36 rebased tree. Change-Id: I8ceda9fa5747fd5790e5393ede573cc09fd13876 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
2016-12-14drm/bridge/sii8620: fix reset line logicAndrzej Hajda
Reset line is active in low state, previous configuration was incorrect, but it worked because logic was also inverted in the driver. The patch fixes it. To keep bisectability both changes are put into one patch. The patch adjusts also delays. Change-Id: I07d08f763fa5ed4805eb638c1d2bb1ddd3328680 Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
2016-12-14ARM64: dts: exynos5433-tm2(e): sii8620 remove obsolete int-gpio propertiesAndrzej Hajda
These properties are not needed anymore as the driver has been converted to interrupt properties. Change-Id: I255287ea913b62c286c1a0c62bdf772d33055c49 Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
2016-12-14ARM64: dts: exynos5433-tm2(e): sii8620 add interrupt propertiesAndrzej Hajda
Add interrupts property to represent interrupt pin. Obsolete int-gpio will be removed after driver update to keep bisectability. Change-Id: I3c766f45cc37a7765f84cabcbee24d5d551dc113 Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
2016-12-14ARM64: tizen_tm2_defconfig: enable CONFIG_NETFILTER_XT_TARGET_SECMARKjooseong lee
The config allows security marking of network packets. Iptable need to set packet's secmark to 'System' label to avoid Smack deny issue only for multicast address range. * Refer to : https://review.tizen.org/gerrit/#/c/100096/ Change-Id: I28dce71862d2bddba2ede2f72b7cdd493c3d184f Signed-off-by: jooseong lee <jooseong.lee@samsung.com>
2016-12-14ARM: tizen_odroid_defconfig: enableCONFIG_NETFILTER_XT_TARGET_SECMARKjooseong lee
The config allows security marking of network packets. Iptable need to set packet's secmark to 'System' label to avoid Smack deny issue only for multicast address range. * Refer to : https://review.tizen.org/gerrit/#/c/100096/ Change-Id: If0dcf494197beb7eb5ae035e0998ac2c8907d0cc Signed-off-by: jooseong lee <jooseong.lee@samsung.com>
2016-12-14ARM: defconfig: odroid: enable USB CAN/GPS interfaceSangjung Woo
In order to support both USB Serial CAN adaptor and GPS USB interface, this enables its related options. Change-Id: I220e8366b51798e38759f18b4d830a3b47302400 Signed-off-by: Sangjung Woo <sangjung.woo@samsung.com>
2016-12-14ARM: defconfig: odroid: enable tethering & its related optionsSangjung Woo
In order to support Network tethering, this patch enables its related options. Change-Id: I4a358b5df65c539d0b56331040b28711ab096078 Signed-off-by: Sangjung Woo <sangjung.woo@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
2016-12-14ARM: defconfig: odroid: enable USB PEAK CAN driverSangjung Woo
In order to support USB PEAK CAN driver, this patch enables it. Change-Id: I7d859e657cd22ed753b93e41194b7a1eadf1f8fe Signed-off-by: Sangjung Woo <sangjung.woo@samsung.com>
2016-12-14ARM: defconfig: odroid: enable CAN and VCAN options.Sangjung Woo
In order to support CAN (i.e. Controller Area Network), this patch enables CAN and its related options like VCAN. Change-Id: I4d709b0be98c1ed1c307925fd5cdca0058ea6847 Signed-off-by: Sangjung Woo <sangjung.woo@samsung.com>
2016-12-14ARM: dts: add mmc detect gpio for exynos5422-odroidxu3/4Łukasz Stelmach
The patch adds gpio for detecting presence of MMC card. It fixes issue with kernel hang when MMC card is missing and prevents flooding kernel log with mmc bus parameters. Change-Id: I6eca44d9942c9f5958dba68a98ea25f2809ed20d Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org> Origin: https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=fb1aeedb61adcb7651eada9eb79ddfa11f21f085
2016-12-14ARM: tizen_{odroid,tm2}_defconfig: enable DMA BUF FENCE supportMarek Szyprowski
Change-Id: I963eaef32f09f32f3e93418e6c236964ee0e54ad Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2016-12-14ARM: defconfig: odroid: enable 6LOWPAN and BT_6LOWPAN optionsSeung-Woo Kim
This patch enables 6Lowpan modules for BT. Change-Id: Id607cc9ef9cdcee5600ecfe151562752ade82475 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
2016-12-14arm64: defconfig: tm2: enable 6LOWPAN and BT_6LOWPAN optionsSeung-Woo Kim
This patch enables 6Lowpan modules for BT. Change-Id: I5181bd4ae1face748049448239cb62e90b341fbf Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
2016-12-14ARM: defconfig: odroid: enable CPUFREQ_DT config optionSeung-Woo Kim
To support cpufreq from non big.little arm socs, CPUFREQ_DT shuold be enabled. So, this patch enables CPUFREQ_DT config option. Change-Id: Ic964ce630b6e0eeb4480d5f87b9ec32f375ffc0f Suggested-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
2016-12-14Enable dummy_hcd and FunctionFS in tm2 config.Krzysztof Opasiak
This is required to run usb host API test suit. Change-Id: I203ef286bef030ddd359e6e18145b612a7d8dc05 Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com>
2016-12-14arm64: defconfig: tm2: enable SMACK and AUDIT options for NETFILTERSeung-Woo Kim
To support security check of network packet from Tizen platform, it is required to enable the configs for SMACK_NETFILTER dependent on NETWORK_SECMARK and AUDIT of NETFILTER. Change-Id: I684ce5771dbd6e52ee529ede647d36c6561e549e Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
2016-12-14ARM: defconfig: odroid: enable SMACK and AUDIT options for NETFILTERSeung-Woo Kim
To support security check of network packet from Tizen platform, it is required to enable the configs for SMACK_NETFILTER dependent on NETWORK_SECMARK and AUDIT of NETFILTER. Change-Id: I9176fcad446ea87f503165c4cf2f3aff3c60ec4f Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
2016-12-14arm64: dts: exynos5433: add sleep state for BCM4773 sensorhub gpiosHoegeun Kwon
The BCM4773 power pins need to be alive during sleep mode, because the MCU needs to respond to the external sensors events. Add a sleep alive state for pins. - gpd2-0 (GPS_HUB_EN) - gpf2-2 (MCU_AP_INT_2_1.8V) - gpf2-3 (AP_MCU_INT_1.8V) While pins: - gpd8-0 (SHUB_SPI_SCK) - gpd8-1 (SHUB_SPI_SSN) - gpd6-0 (SHUB_SPI_MISO) - gpd6-1 (SHUB_SPI_MOSI) need to be managed when the device goes and resumes from sleep mode. Change-Id: If508f5b4526e5de665f76b0adb96ae64779b6eb7 Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
2016-12-14arm64: tizen_tm2_defconfig: enable BCM4773 version 2 sensorhub for tm2(e)Hoegeun Kwon
The CONFIG_SENSORS_SSP_BBD_VER2 flag enables the version 2 of the sensorhub in the config file. Change-Id: I21984f496e063f3cb727a8f76f6e189cafc2bd71 Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
2016-12-14arm64: tizen_tm2_defconfig: Enables BCM4773 sensorhub for tm2 boardHoegeun Kwon
Add support for the BCM4773 in the exynos5433 tm2 and tm2e boards as spi_0 nodes. Change-Id: I765f87ee868dfe8d4155a42bf895b09c35cbb85b Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
2016-12-14arm64: dts: exynos5433: add BCM4773 sensorhub dt node for tm2(e)Hoegeun Kwon
Add support for the BCM4773 in the exynos5433 tm2 and tm2e boards as spi_0 nodes. Move the GPIO initialization pins in the board section. Change-Id: Ia4567598527d5169c6669c791fcf40e5d7693b70 Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Signed-off-by: Andi Shyti <andi.shyti@samsung.com> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2016-12-14ARM: dts: tm2(e): add "extcon" property to sii8620Dongwoo Lee
A "extcon" property is added to tm2(e) dts, so sii8620 can be noted about MHL device connection from MUIC through extcon framework. Change-Id: I4bd1f7d62cf1d6b1f3252f42267247c9b50b721c Signed-off-by: Dongwoo Lee <dwoo08.lee@samsung.com>
2016-12-14arm64: dts: exynos5433: tm2/tm2e: clean up non proper line changesSeung-Woo Kim
This patch cleans up non proper line changes. Change-Id: Ifcbac0c5d194266f88b7e88545a7d86e0bcda96a Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
2016-12-14arm64: dts: exynos5433: move tm2/tm2e specific wlan nodes to board dtsSeung-Woo Kim
The wlan and related pinctrl dt nodes are only proper for tm2/tm2e boards, so it should not be in exynos5433. So this patch moves the bodes to speicifc board dts files. Change-Id: Idd0a5bdb34aa4f61ac41c492c9bde2797d26e3af Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
2016-12-14arm64: dts: exynos5433: tm2/tm2e: remove unnecessary disabling spi_6Seung-Woo Kim
The spi_6 dt node is already disabled from exynos5433, so it is not really requred to disable from board dts files. Change-Id: I15e79f79e1cdc3ff6ddaa2f34d63939c5e3fd324 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
2016-12-14ARM64: tizen_tm2_defconfig: update the configuration fileJaehoon Chung
Update the tizen_tm2_defcofig file. Synchronized the defconfig file after updated some Kconfig files. Change-Id: I9924bfd1ef18130fd36b6120cec0cd6c9dcfc275 Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2016-12-14ARM: tizen_trats2_defconfig: Disable MALI_DVFSJoonyoung Shim
MALI_DVFS is internal DVFS feature of mali400. Now we use specific DVFS(USING_GPU_UTILIZATION) and USING_GPU_UTILIZATION conflicts with MALI_DVFS, so disable MALI_DVFS config. Change-Id: I7edd335a1f23e09ee38ecb43e9c380f695dac78b Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
2016-12-14ARM: tizen_rinato_defconfig: Disable MALI_DVFSJoonyoung Shim
MALI_DVFS is internal DVFS feature of mali400. Now we use specific DVFS(USING_GPU_UTILIZATION) and USING_GPU_UTILIZATION conflicts with MALI_DVFS, so disable MALI_DVFS config. Change-Id: Iebef1cddfecfa968d2b19b8b0af7ba5ae017c841 Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
2016-12-14ARM: tizen_odroid_defconfig: Disable MALI_DVFSJoonyoung Shim
MALI_DVFS is internal DVFS feature of mali400. Now we use specific DVFS(USING_GPU_UTILIZATION) and USING_GPU_UTILIZATION conflicts with MALI_DVFS, so disable MALI_DVFS config. Change-Id: I00d0b9737a4caed5a357a2e196e0c37392eb1d80 Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
2016-12-14Enable dummy_hcd and FunctionFS in odroidxu3 config.Krzysztof Opasiak
This is required to run usb host API test suit. Change-Id: I99058db93922e1279f090d76bbacf6c8fe7985b8 Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com>
2016-12-14arm: tizen_odroid_defconfig: enable Android logger driverInki Dae
This patch enables Android logger driver. Tizen common platform will use Android logger driver and dlog will be used as its backend. Change-Id: Id94c5d8f57bfd9d66c8ace470ff82b58699e20a4 Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
2016-12-14ARM: dts: trats2: add "reboot-inform" property for supporting reboot modeJaehoon Chung
Add the reboot-inform property for supporting reboot mode. Trats2 is INFORM3 register, other boards are using INFORM2 regsiter. In trats2's case, when we released the tizen-2.X with linux-3.10 kernel, it had used the INFORM3 register. That's why trats2 only use the INFORM3 register. Change-Id: Ief314f50c47601ad646789790b36731e64e0b688 Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2016-12-14ARM: dts: odroid: add "reboot-inform" property for supporting reboot modeJaehoon Chung
Add the reboot-inform property for supporting reboot mode. Odroid families use the INFORM2 register as reboot special mode. Change-Id: I906c32e6d26fcf08748f4916c277fb3995a1117f Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2016-12-14ARM: exynos: pmu: support the reboot download modeJaehoon Chung
Support the reboot download mode functionality. It can get from device-treee which INFORM register will be used. If want to use this functionality, it also needs to implement something on bootloader side. Change-Id: Iae42f32d69b84ccdcb39fcfc8bc71f9cc8c42302 Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2016-12-14ARM64: dts: exynos5433: fix clock for MSCL/JPEG devfreq controlMarek Szyprowski
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Change-Id: Ic1669e9657da1c601774b3bf366cc6036a77147c
2016-12-14arm: dts: exynos542x: disable orphaned G2D SYSMMU controllersMarek Szyprowski
Disable G2D SYSMMU controllers until support for G2D is really implemented and G2D SYSMMU register access freeze issue is resolved. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Change-Id: I38542642d255313307d9ac6a836ffece4a402b2b
2016-12-14ARM: defconfig: rinato: replace mali400 driver to r5p2 from r4p0Joonyoung Shim
This patch replaces mali400 driver from r4p0 to r5p2 for rinato to align with other boards with mali400. Change-Id: I3f9cb30ccef2390d1df91e7bb2d9d17b4ce29d6e Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
2016-12-14ARM: dts: exynos3250: fix g3d nodesJoonyoung Shim
This fixes order of reg resources. First has to be resource that has lowest address because mali400 r5p2 version requires it. This also adds interrupt-names for g3d nodes. The interrupt-names needs at mali400 r5p2 version. Change-Id: I84a31ff3691ffea084b5f3f0abbcf998ea0a8371 Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
2016-12-14ARM: defconfig: rinato: sync defconfig file for rinato to v4.1 treeJaehoon Chung
This patch updates the defconfig file for rinato to sync with v4.1 tree. Change-Id: Ib1abd29eb6f1a1c23df44d273de1d1d963370143 Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
2016-12-14ARM: defconfig: trats2: replace mali400 driver to r5p2 from r4p0Seung-Woo Kim
This patch replaces mali400 driver from r4p0 to r5p2 for trats2 to align with other boards with mali400. Change-Id: I52d4d85a75d1a399dda3439d5ac6c189b863a48f Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
2016-12-14ARM: defconfig: trats2: disable CONFIG_MMC_CLKGATEJaehoon Chung
This patch disables CONFIG_MMC_CLKGATE to remove spamming mmc log message about setting mmc clock. Change-Id: I1f3071f3e9da6c5d213e48fcb731595ff7b29679 Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
2016-12-14ARM: defconfig: trats2: sync defconfig file for v4.1 treeJaehoon Chung
This patch updates the defconfig file for trats2 to sync with v4.1 tree. Change-Id: Ib9682a36e721a881256ce52caa94a916a91d8403 Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>