Merge commit '3ad5515' into linaro-3.0

This is branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
as found in mainline commit b6844e8f64.

Conflicts:
	arch/arm/boot/compressed/vmlinux.lds.in

106 files changed, 1879 insertions, 1470 deletions

diff --git a/Documentation/arm/Booting b/Documentation/arm/Booting
index 4e686a2ed91..a341d87d276 100644
--- a/Documentation/arm/Booting
+++ b/Documentation/arm/Booting
@@ -164,3 +164,8 @@ In either case, the following conditions must be met:
 - The boot loader is expected to call the kernel image by jumping
   directly to the first instruction of the kernel image.
 
+  On CPUs supporting the ARM instruction set, the entry must be
+  made in ARM state, even for a Thumb-2 kernel.
+
+  On CPUs supporting only the Thumb instruction set such as
+  Cortex-M class CPUs, the entry must be made in Thumb state.
diff --git a/Documentation/arm/SH-Mobile/zboot-rom-sdhi.txt b/Documentation/arm/SH-Mobile/zboot-rom-sdhi.txt
new file mode 100644
index 00000000000..441959846e1
--- /dev/null
+++ b/Documentation/arm/SH-Mobile/zboot-rom-sdhi.txt
@@ -0,0 +1,42 @@
+ROM-able zImage boot from eSD
+-----------------------------
+
+An ROM-able zImage compiled with ZBOOT_ROM_SDHI may be written to eSD and
+SuperH Mobile ARM will to boot directly from the SDHI hardware block.
+
+This is achieved by the mask ROM loading the first portion of the image into
+MERAM and then jumping to it. This portion contains loader code which
+copies the entire image to SDRAM and jumps to it. From there the zImage
+boot code proceeds as normal, uncompressing the image into its final
+location and then jumping to it.
+
+This code has been tested on an mackerel board using the developer 1A eSD
+boot mode which is configured using the following jumper settings.
+
+   8 7 6 5 4 3 2 1
+   x|x|x|x| |x|x|
+S4 -+-+-+-+-+-+-+-
+    | | | |x| | |x on
+
+The eSD card needs to be present in SDHI slot 1 (CN7).
+As such S1 and S33 also need to be configured as per
+the notes in arch/arm/mach-shmobile/board-mackerel.c.
+
+A partial zImage must be written to physical partition #1 (boot)
+of the eSD at sector 0 in vrl4 format. A utility vrl4 is supplied to
+accomplish this.
+
+e.g.
+	vrl4 < zImage | dd of=/dev/sdX bs=512 count=17
+
+A full copy of _the same_ zImage should be written to physical partition #1
+(boot) of the eSD at sector 0. This should _not_ be in vrl4 format.
+
+	vrl4 < zImage | dd of=/dev/sdX bs=512
+
+Note: The commands above assume that the physical partition has been
+switched. No such facility currently exists in the Linux Kernel.
+
+Physical partitions are described in the eSD specification.  At the time of
+writing they are not the same as partitions that are typically configured
+using fdisk and visible through /proc/partitions
diff --git a/Documentation/devicetree/bindings/arm/pmu.txt b/Documentation/devicetree/bindings/arm/pmu.txt
new file mode 100644
index 00000000000..1c044eb320c
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/pmu.txt
@@ -0,0 +1,21 @@
+* ARM Performance Monitor Units
+
+ARM cores often have a PMU for counting cpu and cache events like cache misses
+and hits. The interface to the PMU is part of the ARM ARM. The ARM PMU
+representation in the device tree should be done as under:-
+
+Required properties:
+
+- compatible : should be one of
+	"arm,cortex-a9-pmu"
+	"arm,cortex-a8-pmu"
+	"arm,arm1176-pmu"
+	"arm,arm1136-pmu"
+- interrupts : 1 combined interrupt or 1 per core.
+
+Example:
+
+pmu {
+        compatible = "arm,cortex-a9-pmu";
+        interrupts = <100 101>;
+};
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index f38e275bea3..990ba7e97e1 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -37,6 +37,9 @@ config ARM
 	  Europe.  There is an ARM Linux project with a web page at
 	  <http://www.arm.linux.org.uk/>.
 
+config ARM_HAS_SG_CHAIN
+	bool
+
 config HAVE_PWM
 	bool
 
@@ -1371,7 +1374,6 @@ config SCHED_SMT
 
 config HAVE_ARM_SCU
 	bool
-	depends on SMP
 	help
 	  This option enables support for the ARM system coherency unit
 
@@ -1740,17 +1742,34 @@ config ZBOOT_ROM
 	  Say Y here if you intend to execute your compressed kernel image
 	  (zImage) directly from ROM or flash.  If unsure, say N.
 
+choice
+	prompt "Include SD/MMC loader in zImage (EXPERIMENTAL)"
+	depends on ZBOOT_ROM && ARCH_SH7372 && EXPERIMENTAL
+	default ZBOOT_ROM_NONE
+	help
+	  Include experimental SD/MMC loading code in the ROM-able zImage.
+	  With this enabled it is possible to write the the ROM-able zImage
+	  kernel image to an MMC or SD card and boot the kernel straight
+	  from the reset vector. At reset the processor Mask ROM will load
+	  the first part of the the ROM-able zImage which in turn loads the
+	  rest the kernel image to RAM.
+
+config ZBOOT_ROM_NONE
+	bool "No SD/MMC loader in zImage (EXPERIMENTAL)"
+	help
+	  Do not load image from SD or MMC
+
 config ZBOOT_ROM_MMCIF
 	bool "Include MMCIF loader in zImage (EXPERIMENTAL)"
-	depends on ZBOOT_ROM && ARCH_SH7372 && EXPERIMENTAL
 	help
-	  Say Y here to include experimental MMCIF loading code in the
-	  ROM-able zImage. With this enabled it is possible to write the
-	  the ROM-able zImage kernel image to an MMC card and boot the
-	  kernel straight from the reset vector. At reset the processor
-	  Mask ROM will load the first part of the the ROM-able zImage
-	  which in turn loads the rest the kernel image to RAM using the
-	  MMCIF hardware block.
+	  Load image from MMCIF hardware block.
+
+config ZBOOT_ROM_SH_MOBILE_SDHI
+	bool "Include SuperH Mobile SDHI loader in zImage (EXPERIMENTAL)"
+	help
+	  Load image from SDHI hardware block
+
+endchoice
 
 config ARM_APPENDED_DTB
 	bool "Use appended device tree blob to zImage"
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index 4b94995fc47..9804edf7fa8 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -6,13 +6,19 @@
 
 OBJS		=
 
-# Ensure that mmcif loader code appears early in the image
+# Ensure that MMCIF loader code appears early in the image
 # to minimise that number of bocks that have to be read in
 # order to load it.
 ifeq ($(CONFIG_ZBOOT_ROM_MMCIF),y)
-ifeq ($(CONFIG_ARCH_SH7372),y)
 OBJS		+= mmcif-sh7372.o
 endif
+
+# Ensure that SDHI loader code appears early in the image
+# to minimise that number of bocks that have to be read in
+# order to load it.
+ifeq ($(CONFIG_ZBOOT_ROM_SH_MOBILE_SDHI),y)
+OBJS		+= sdhi-shmobile.o
+OBJS		+= sdhi-sh7372.o
 endif
 
 AFLAGS_head.o += -DTEXT_OFFSET=$(TEXT_OFFSET)
diff --git a/arch/arm/boot/compressed/head-shmobile.S b/arch/arm/boot/compressed/head-shmobile.S
index c943d2e7da9..fe3719b516f 100644
--- a/arch/arm/boot/compressed/head-shmobile.S
+++ b/arch/arm/boot/compressed/head-shmobile.S
@@ -25,14 +25,14 @@
 	/* load board-specific initialization code */
 #include <mach/zboot.h>
 
-#ifdef CONFIG_ZBOOT_ROM_MMCIF
-	/* Load image from MMC */
-	adr	sp, __tmp_stack + 128
+#if defined(CONFIG_ZBOOT_ROM_MMCIF) || defined(CONFIG_ZBOOT_ROM_SH_MOBILE_SDHI)
+	/* Load image from MMC/SD */
+	adr	sp, __tmp_stack + 256
 	ldr	r0, __image_start
 	ldr	r1, __image_end
 	subs	r1, r1, r0
 	ldr	r0, __load_base
-	bl	mmcif_loader
+	bl	mmc_loader
 
 	/* Jump to loaded code */
 	ldr	r0, __loaded
@@ -51,9 +51,9 @@ __loaded:
 	.long	__continue
 	.align
 __tmp_stack:
-	.space	128
+	.space	256
 __continue:
-#endif /* CONFIG_ZBOOT_ROM_MMCIF */
+#endif /* CONFIG_ZBOOT_ROM_MMC || CONFIG_ZBOOT_ROM_SH_MOBILE_SDHI */
 
 	b	1f
 __atags:@ tag #1
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 5a07162568f..d79b83c5bd9 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -460,7 +460,8 @@ not_relocated:	mov	r0, #0
 		mov	r0, #0			@ must be zero
 		mov	r1, r7			@ restore architecture number
 		mov	r2, r8			@ restore atags pointer
-		mov	pc, r4			@ call kernel
+ ARM(		mov	pc, r4	)		@ call kernel
+ THUMB(		bx	r4	)		@ entry point is always ARM
 
 		.align	2
 		.type	LC0, #object
diff --git a/arch/arm/boot/compressed/mmcif-sh7372.c b/arch/arm/boot/compressed/mmcif-sh7372.c
index 7453c8337b8..b6f61d9a5a1 100644
--- a/arch/arm/boot/compressed/mmcif-sh7372.c
+++ b/arch/arm/boot/compressed/mmcif-sh7372.c
@@ -40,7 +40,7 @@
  * to an MMC card
  * # dd if=vrl4.out of=/dev/sdx bs=512 seek=1
  */
-asmlinkage void mmcif_loader(unsigned char *buf, unsigned long len)
+asmlinkage void mmc_loader(unsigned char *buf, unsigned long len)
 {
 	mmc_init_progress();
 	mmc_update_progress(MMC_PROGRESS_ENTER);
diff --git a/arch/arm/boot/compressed/sdhi-sh7372.c b/arch/arm/boot/compressed/sdhi-sh7372.c
new file mode 100644
index 00000000000..d403a8b24d7
--- /dev/null
+++ b/arch/arm/boot/compressed/sdhi-sh7372.c
@@ -0,0 +1,95 @@
+/*
+ * SuperH Mobile SDHI
+ *
+ * Copyright (C) 2010 Magnus Damm
+ * Copyright (C) 2010 Kuninori Morimoto
+ * Copyright (C) 2010 Simon Horman
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Parts inspired by u-boot
+ */
+
+#include <linux/io.h>
+#include <mach/mmc.h>
+#include <linux/mmc/boot.h>
+#include <linux/mmc/tmio.h>
+
+#include "sdhi-shmobile.h"
+
+#define PORT179CR       0xe60520b3
+#define PORT180CR       0xe60520b4
+#define PORT181CR       0xe60520b5
+#define PORT182CR       0xe60520b6
+#define PORT183CR       0xe60520b7
+#define PORT184CR       0xe60520b8
+
+#define SMSTPCR3        0xe615013c
+
+#define CR_INPUT_ENABLE 0x10
+#define CR_FUNCTION1    0x01
+
+#define SDHI1_BASE	(void __iomem *)0xe6860000
+#define SDHI_BASE	SDHI1_BASE
+
+/*  SuperH Mobile SDHI loader
+ *
+ * loads the zImage from an SD card starting from block 0
+ * on physical partition 1
+ *
+ * The image must be start with a vrl4 header and
+ * the zImage must start at offset 512 of the image. That is,
+ * at block 1 (=byte 512) of physical partition 1
+ *
+ * Use the following line to write the vrl4 formated zImage
+ * to an SD card
+ * # dd if=vrl4.out of=/dev/sdx bs=512
+ */
+asmlinkage void mmc_loader(unsigned short *buf, unsigned long len)
+{
+	int high_capacity;
+
+	mmc_init_progress();
+
+	mmc_update_progress(MMC_PROGRESS_ENTER);
+        /* Initialise SDHI1 */
+        /* PORT184CR: GPIO_FN_SDHICMD1 Control */
+        __raw_writeb(CR_FUNCTION1, PORT184CR);
+        /* PORT179CR: GPIO_FN_SDHICLK1 Control */
+        __raw_writeb(CR_INPUT_ENABLE|CR_FUNCTION1, PORT179CR);
+        /* PORT181CR: GPIO_FN_SDHID1_3 Control */
+        __raw_writeb(CR_FUNCTION1, PORT183CR);
+        /* PORT182CR: GPIO_FN_SDHID1_2 Control */
+        __raw_writeb(CR_FUNCTION1, PORT182CR);
+        /* PORT183CR: GPIO_FN_SDHID1_1 Control */
+        __raw_writeb(CR_FUNCTION1, PORT181CR);
+        /* PORT180CR: GPIO_FN_SDHID1_0 Control */
+        __raw_writeb(CR_FUNCTION1, PORT180CR);
+
+        /* Enable clock to SDHI1 hardware block */
+        __raw_writel(__raw_readl(SMSTPCR3) & ~(1 << 13), SMSTPCR3);
+
+	/* setup SDHI hardware */
+	mmc_update_progress(MMC_PROGRESS_INIT);
+	high_capacity = sdhi_boot_init(SDHI_BASE);
+	if (high_capacity < 0)
+		goto err;
+
+	mmc_update_progress(MMC_PROGRESS_LOAD);
+	/* load kernel */
+	if (sdhi_boot_do_read(SDHI_BASE, high_capacity,
+			      0, /* Kernel is at block 1 */
+			      (len + TMIO_BBS - 1) / TMIO_BBS, buf))
+		goto err;
+
+        /* Disable clock to SDHI1 hardware block */
+        __raw_writel(__raw_readl(SMSTPCR3) & (1 << 13), SMSTPCR3);
+
+	mmc_update_progress(MMC_PROGRESS_DONE);
+
+	return;
+err:
+	for(;;);
+}
diff --git a/arch/arm/boot/compressed/sdhi-shmobile.c b/arch/arm/boot/compressed/sdhi-shmobile.c
new file mode 100644
index 00000000000..bd3d4698095
--- /dev/null
+++ b/arch/arm/boot/compressed/sdhi-shmobile.c
@@ -0,0 +1,449 @@
+/*
+ * SuperH Mobile SDHI
+ *
+ * Copyright (C) 2010 Magnus Damm
+ * Copyright (C) 2010 Kuninori Morimoto
+ * Copyright (C) 2010 Simon Horman
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Parts inspired by u-boot
+ */
+
+#include <linux/io.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/core.h>
+#include <linux/mmc/mmc.h>
+#include <linux/mmc/sd.h>
+#include <linux/mmc/tmio.h>
+#include <mach/sdhi.h>
+
+#define OCR_FASTBOOT		(1<<29)
+#define OCR_HCS			(1<<30)
+#define OCR_BUSY		(1<<31)
+
+#define RESP_CMD12		0x00000030
+
+static inline u16 sd_ctrl_read16(void __iomem *base, int addr)
+{
+        return __raw_readw(base + addr);
+}
+
+static inline u32 sd_ctrl_read32(void __iomem *base, int addr)
+{
+	return __raw_readw(base + addr) |
+	       __raw_readw(base + addr + 2) << 16;
+}
+
+static inline void sd_ctrl_write16(void __iomem *base, int addr, u16 val)
+{
+	__raw_writew(val, base + addr);
+}
+
+static inline void sd_ctrl_write32(void __iomem *base, int addr, u32 val)
+{
+	__raw_writew(val, base + addr);
+	__raw_writew(val >> 16, base + addr + 2);
+}
+
+#define ALL_ERROR (TMIO_STAT_CMD_IDX_ERR | TMIO_STAT_CRCFAIL |		\
+		   TMIO_STAT_STOPBIT_ERR | TMIO_STAT_DATATIMEOUT |	\
+		   TMIO_STAT_RXOVERFLOW | TMIO_STAT_TXUNDERRUN |	\
+		   TMIO_STAT_CMDTIMEOUT | TMIO_STAT_ILL_ACCESS |	\
+		   TMIO_STAT_ILL_FUNC)
+
+static int sdhi_intr(void __iomem *base)
+{
+	unsigned long state = sd_ctrl_read32(base, CTL_STATUS);
+
+	if (state & ALL_ERROR) {
+		sd_ctrl_write32(base, CTL_STATUS, ~ALL_ERROR);
+		sd_ctrl_write32(base, CTL_IRQ_MASK,
+				ALL_ERROR |
+				sd_ctrl_read32(base, CTL_IRQ_MASK));
+		return -EINVAL;
+	}
+	if (state & TMIO_STAT_CMDRESPEND) {
+		sd_ctrl_write32(base, CTL_STATUS, ~TMIO_STAT_CMDRESPEND);
+		sd_ctrl_write32(base, CTL_IRQ_MASK,
+				TMIO_STAT_CMDRESPEND |
+				sd_ctrl_read32(base, CTL_IRQ_MASK));
+		return 0;
+	}
+	if (state & TMIO_STAT_RXRDY) {
+		sd_ctrl_write32(base, CTL_STATUS, ~TMIO_STAT_RXRDY);
+		sd_ctrl_write32(base, CTL_IRQ_MASK,
+				TMIO_STAT_RXRDY | TMIO_STAT_TXUNDERRUN |
+				sd_ctrl_read32(base, CTL_IRQ_MASK));
+		return 0;
+	}
+	if (state & TMIO_STAT_DATAEND) {
+		sd_ctrl_write32(base, CTL_STATUS, ~TMIO_STAT_DATAEND);
+		sd_ctrl_write32(base, CTL_IRQ_MASK,
+				TMIO_STAT_DATAEND |
+				sd_ctrl_read32(base, CTL_IRQ_MASK));
+		return 0;
+	}
+
+	return -EAGAIN;
+}
+
+static int sdhi_boot_wait_resp_end(void __iomem *base)
+{
+	int err = -EAGAIN, timeout = 10000000;
+
+	while (timeout--) {
+		err = sdhi_intr(base);
+		if (err != -EAGAIN)
+			break;
+		udelay(1);
+	}
+
+	return err;
+}
+
+/* SDHI_CLK_CTRL */
+#define CLK_MMC_ENABLE                 (1 << 8)
+#define CLK_MMC_INIT                   (1 << 6)        /* clk / 256 */
+
+static void sdhi_boot_mmc_clk_stop(void __iomem *base)
+{
+	sd_ctrl_write16(base, CTL_CLK_AND_WAIT_CTL, 0x0000);
+	msleep(10);
+	sd_ctrl_write16(base, CTL_SD_CARD_CLK_CTL, ~CLK_MMC_ENABLE &
+		sd_ctrl_read16(base, CTL_SD_CARD_CLK_CTL));
+	msleep(10);
+}
+
+static void sdhi_boot_mmc_clk_start(void __iomem *base)
+{
+	sd_ctrl_write16(base, CTL_SD_CARD_CLK_CTL, CLK_MMC_ENABLE |
+		sd_ctrl_read16(base, CTL_SD_CARD_CLK_CTL));
+	msleep(10);
+	sd_ctrl_write16(base, CTL_CLK_AND_WAIT_CTL, CLK_MMC_ENABLE);
+	msleep(10);
+}
+
+static void sdhi_boot_reset(void __iomem *base)
+{
+	sd_ctrl_write16(base, CTL_RESET_SD, 0x0000);
+	msleep(10);
+	sd_ctrl_write16(base, CTL_RESET_SD, 0x0001);
+	msleep(10);
+}
+
+/* Set MMC clock / power.
+ * Note: This controller uses a simple divider scheme therefore it cannot
+ * run a MMC card at full speed (20MHz). The max clock is 24MHz on SD, but as
+ * MMC wont run that fast, it has to be clocked at 12MHz which is the next
+ * slowest setting.
+ */
+static int sdhi_boot_mmc_set_ios(void __iomem *base, struct mmc_ios *ios)
+{
+	if (sd_ctrl_read32(base, CTL_STATUS) & TMIO_STAT_CMD_BUSY)
+		return -EBUSY;
+
+	if (ios->clock)
+		sd_ctrl_write16(base, CTL_SD_CARD_CLK_CTL,
+				ios->clock | CLK_MMC_ENABLE);
+
+	/* Power sequence - OFF -> ON -> UP */
+	switch (ios->power_mode) {
+	case MMC_POWER_OFF: /* power down SD bus */
+		sdhi_boot_mmc_clk_stop(base);
+		break;
+	case MMC_POWER_ON: /* power up SD bus */
+		break;
+	case MMC_POWER_UP: /* start bus clock */
+		sdhi_boot_mmc_clk_start(base);
+		break;
+	}
+
+	switch (ios->bus_width) {
+	case MMC_BUS_WIDTH_1:
+		sd_ctrl_write16(base, CTL_SD_MEM_CARD_OPT, 0x80e0);
+	break;
+	case MMC_BUS_WIDTH_4:
+		sd_ctrl_write16(base, CTL_SD_MEM_CARD_OPT, 0x00e0);
+	break;
+	}
+
+	/* Let things settle. delay taken from winCE driver */
+	udelay(140);
+
+	return 0;
+}
+
+/* These are the bitmasks the tmio chip requires to implement the MMC response
+ * types. Note that R1 and R6 are the same in this scheme. */
+#define RESP_NONE      0x0300
+#define RESP_R1        0x0400
+#define RESP_R1B       0x0500
+#define RESP_R2        0x0600
+#define RESP_R3        0x0700
+#define DATA_PRESENT   0x0800
+#define TRANSFER_READ  0x1000
+
+static int sdhi_boot_request(void __iomem *base, struct mmc_command *cmd)
+{
+	int err, c = cmd->opcode;
+
+	switch (mmc_resp_type(cmd)) {
+	case MMC_RSP_NONE: c |= RESP_NONE; break;
+	case MMC_RSP_R1:   c |= RESP_R1;   break;
+	case MMC_RSP_R1B:  c |= RESP_R1B;  break;
+	case MMC_RSP_R2:   c |= RESP_R2;   break;
+	case MMC_RSP_R3:   c |= RESP_R3;   break;
+	default:
+		return -EINVAL;
+	}
+
+	/* No interrupts so this may not be cleared */
+	sd_ctrl_write32(base, CTL_STATUS, ~TMIO_STAT_CMDRESPEND);
+
+	sd_ctrl_write32(base, CTL_IRQ_MASK, TMIO_STAT_CMDRESPEND |
+			sd_ctrl_read32(base, CTL_IRQ_MASK));
+	sd_ctrl_write32(base, CTL_ARG_REG, cmd->arg);
+	sd_ctrl_write16(base, CTL_SD_CMD, c);
+
+
+	sd_ctrl_write32(base, CTL_IRQ_MASK,
+			~(TMIO_STAT_CMDRESPEND | ALL_ERROR) &
+			sd_ctrl_read32(base, CTL_IRQ_MASK));
+
+	err = sdhi_boot_wait_resp_end(base);
+	if (err)
+		return err;
+
+	cmd->resp[0] = sd_ctrl_read32(base, CTL_RESPONSE);
+
+	return 0;
+}
+
+static int sdhi_boot_do_read_single(void __iomem *base, int high_capacity,
+				    unsigned long block, unsigned short *buf)
+{
+	int err, i;
+
+	/* CMD17 - Read */
+	{
+		struct mmc_command cmd;
+
+		cmd.opcode = MMC_READ_SINGLE_BLOCK | \
+			     TRANSFER_READ | DATA_PRESENT;
+		if (high_capacity)
+			cmd.arg = block;
+		else
+			cmd.arg = block * TMIO_BBS;
+		cmd.flags = MMC_RSP_R1;
+		err = sdhi_boot_request(base, &cmd);
+		if (err)
+			return err;
+	}
+
+	sd_ctrl_write32(base, CTL_IRQ_MASK,
+			~(TMIO_STAT_DATAEND | TMIO_STAT_RXRDY |
+			  TMIO_STAT_TXUNDERRUN) &
+			sd_ctrl_read32(base, CTL_IRQ_MASK));
+	err = sdhi_boot_wait_resp_end(base);
+	if (err)
+		return err;
+
+	sd_ctrl_write16(base, CTL_SD_XFER_LEN, TMIO_BBS);
+	for (i = 0; i < TMIO_BBS / sizeof(*buf); i++)
+		*buf++ = sd_ctrl_read16(base, RESP_CMD12);
+
+	err = sdhi_boot_wait_resp_end(base);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+int sdhi_boot_do_read(void __iomem *base, int high_capacity,
+		      unsigned long offset, unsigned short count,
+		      unsigned short *buf)
+{
+	unsigned long i;
+	int err = 0;
+
+	for (i = 0; i < count; i++) {
+		err = sdhi_boot_do_read_single(base, high_capacity, offset + i,
+					       buf + (i * TMIO_BBS /
+						      sizeof(*buf)));
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
+
+#define VOLTAGES (MMC_VDD_32_33 | MMC_VDD_33_34)
+
+int sdhi_boot_init(void __iomem *base)
+{
+	bool sd_v2 = false, sd_v1_0 = false;
+	unsigned short cid;
+	int err, high_capacity = 0;
+
+	sdhi_boot_mmc_clk_stop(base);
+	sdhi_boot_reset(base);
+
+	/* mmc0: clock 400000Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0 timing 0 */
+	{
+		struct mmc_ios ios;
+		ios.power_mode = MMC_POWER_ON;
+		ios.bus_width = MMC_BUS_WIDTH_1;
+		ios.clock = CLK_MMC_INIT;
+		err = sdhi_boot_mmc_set_ios(base, &ios);
+		if (err)
+			return err;
+	}
+
+	/* CMD0 */
+	{
+		struct mmc_command cmd;
+		msleep(1);
+		cmd.opcode = MMC_GO_IDLE_STATE;
+		cmd.arg = 0;
+		cmd.flags = MMC_RSP_NONE;
+		err = sdhi_boot_request(base, &cmd);
+		if (err)
+			return err;
+		msleep(2);
+	}
+
+	/* CMD8 - Test for SD version 2 */
+	{
+		struct mmc_command cmd;
+		cmd.opcode = SD_SEND_IF_COND;
+		cmd.arg = (VOLTAGES != 0) << 8 | 0xaa;
+		cmd.flags = MMC_RSP_R1;
+		err = sdhi_boot_request(base, &cmd); /* Ignore error */
+		if ((cmd.resp[0] & 0xff) == 0xaa)
+			sd_v2 = true;
+	}
+
+	/* CMD55 - Get OCR (SD) */
+	{
+		int timeout = 1000;
+		struct mmc_command cmd;
+
+		cmd.arg = 0;
+
+		do {
+			cmd.opcode = MMC_APP_CMD;
+			cmd.flags = MMC_RSP_R1;
+			cmd.arg = 0;
+			err = sdhi_boot_request(base, &cmd);
+			if (err)
+				break;
+
+			cmd.opcode = SD_APP_OP_COND;
+			cmd.flags = MMC_RSP_R3;
+			cmd.arg = (VOLTAGES & 0xff8000);
+			if (sd_v2)
+				cmd.arg |= OCR_HCS;
+			cmd.arg |= OCR_FASTBOOT;
+			err = sdhi_boot_request(base, &cmd);
+			if (err)
+				break;
+
+			msleep(1);
+		} while((!(cmd.resp[0] & OCR_BUSY)) && --timeout);
+
+		if (!err && timeout) {
+			if (!sd_v2)
+				sd_v1_0 = true;
+			high_capacity = (cmd.resp[0] & OCR_HCS) == OCR_HCS;
+		}
+	}
+
+	/* CMD1 - Get OCR (MMC) */
+	if (!sd_v2 && !sd_v1_0) {
+		int timeout = 1000;
+		struct mmc_command cmd;
+
+		do {
+			cmd.opcode = MMC_SEND_OP_COND;
+			cmd.arg = VOLTAGES | OCR_HCS;
+			cmd.flags = MMC_RSP_R3;
+			err = sdhi_boot_request(base, &cmd);
+			if (err)
+				return err;
+
+			msleep(1);
+		} while((!(cmd.resp[0] & OCR_BUSY)) && --timeout);
+
+		if (!timeout)
+			return -EAGAIN;
+
+		high_capacity = (cmd.resp[0] & OCR_HCS) == OCR_HCS;
+	}
+
+	/* CMD2 - Get CID */
+	{
+		struct mmc_command cmd;
+		cmd.opcode = MMC_ALL_SEND_CID;
+		cmd.arg = 0;
+		cmd.flags = MMC_RSP_R2;
+		err = sdhi_boot_request(base, &cmd);
+		if (err)
+			return err;
+	}
+
+	/* CMD3
+	 * MMC: Set the relative address
+	 * SD:  Get the relative address
+	 * Also puts the card into the standby state
+	 */
+	{
+		struct mmc_command cmd;
+		cmd.opcode = MMC_SET_RELATIVE_ADDR;
+		cmd.arg = 0;
+		cmd.flags = MMC_RSP_R1;
+		err = sdhi_boot_request(base, &cmd);
+		if (err)
+			return err;
+		cid = cmd.resp[0] >> 16;
+	}
+
+	/* CMD9 - Get CSD */
+	{
+		struct mmc_command cmd;
+		cmd.opcode = MMC_SEND_CSD;
+		cmd.arg = cid << 16;
+		cmd.flags = MMC_RSP_R2;
+		err = sdhi_boot_request(base, &cmd);
+		if (err)
+			return err;
+	}
+
+	/* CMD7 - Select the card */
+	{
+		struct mmc_command cmd;
+		cmd.opcode = MMC_SELECT_CARD;
+		//cmd.arg = rca << 16;
+		cmd.arg = cid << 16;
+		//cmd.flags = MMC_RSP_R1B;
+		cmd.flags = MMC_RSP_R1;
+		err = sdhi_boot_request(base, &cmd);
+		if (err)
+			return err;
+	}
+
+	/* CMD16 - Set the block size */
+	{
+		struct mmc_command cmd;
+		cmd.opcode = MMC_SET_BLOCKLEN;
+		cmd.arg = TMIO_BBS;
+		cmd.flags = MMC_RSP_R1;
+		err = sdhi_boot_request(base, &cmd);
+		if (err)
+			return err;
+	}
+
+	return high_capacity;
+}
diff --git a/arch/arm/boot/compressed/sdhi-shmobile.h b/arch/arm/boot/compressed/sdhi-shmobile.h
new file mode 100644
index 00000000000..92eaa09f985
--- /dev/null
+++ b/arch/arm/boot/compressed/sdhi-shmobile.h
@@ -0,0 +1,11 @@
+#ifndef SDHI_MOBILE_H
+#define SDHI_MOBILE_H
+
+#include <linux/compiler.h>
+
+int sdhi_boot_do_read(void __iomem *base, int high_capacity,
+		      unsigned long offset, unsigned short count,
+		      unsigned short *buf);
+int sdhi_boot_init(void __iomem *base);
+
+#endif
diff --git a/arch/arm/boot/compressed/vmlinux.lds.in b/arch/arm/boot/compressed/vmlinux.lds.in
index 6c02db134f2..6bfc9c8fb95 100644
--- a/arch/arm/boot/compressed/vmlinux.lds.in
+++ b/arch/arm/boot/compressed/vmlinux.lds.in
@@ -33,20 +33,24 @@ SECTIONS
     *(.text.*)
     *(.fixup)
     *(.gnu.warning)
+    *(.glue_7t)
+    *(.glue_7)
+  }
+  .rodata : {
     *(.rodata)
     *(.rodata.*)
-    *(.glue_7)
-    *(.glue_7t)
+  }
+  .piggydata : {
     *(.piggydata)
-    . = ALIGN(4);
   }
 
+  . = ALIGN(4);
   _etext = .;
 
+  .got.plt		: { *(.got.plt) }
   _got_start = .;
   .got			: { *(.got) }
   _got_end = .;
-  .got.plt		: { *(.got.plt) }
 
   /* ensure the zImage file size is always a multiple of 64 bits */
   .pad			: { BYTE(0); . = ALIGN(8); }
diff --git a/arch/arm/include/asm/bitops.h b/arch/arm/include/asm/bitops.h
index b4892a06442..f4280593dfa 100644
--- a/arch/arm/include/asm/bitops.h
+++ b/arch/arm/include/asm/bitops.h
@@ -26,8 +26,8 @@
 #include <linux/compiler.h>
 #include <asm/system.h>
 
-#define smp_mb__before_clear_bit()	mb()
-#define smp_mb__after_clear_bit()	mb()
+#define smp_mb__before_clear_bit()	smp_mb()
+#define smp_mb__after_clear_bit()	smp_mb()
 
 /*
  * These functions are the basis of our bit ops.
diff --git a/arch/arm/include/asm/entry-macro-multi.S b/arch/arm/include/asm/entry-macro-multi.S
index 2da8547de6d..2f1e2098dfe 100644
--- a/arch/arm/include/asm/entry-macro-multi.S
+++ b/arch/arm/include/asm/entry-macro-multi.S
@@ -4,8 +4,8 @@
  * Interrupt handling.  Preserves r7, r8, r9
  */
 	.macro	arch_irq_handler_default
-	get_irqnr_preamble r5, lr
-1:	get_irqnr_and_base r0, r6, r5, lr
+	get_irqnr_preamble r6, lr
+1:	get_irqnr_and_base r0, r2, r6, lr
 	movne	r1, sp
 	@
 	@ routine called with r0 = irq number, r1 = struct pt_regs *
@@ -17,17 +17,17 @@
 	/*
 	 * XXX
 	 *
-	 * this macro assumes that irqstat (r6) and base (r5) are
+	 * this macro assumes that irqstat (r2) and base (r6) are
 	 * preserved from get_irqnr_and_base above
 	 */
-	ALT_SMP(test_for_ipi r0, r6, r5, lr)
+	ALT_SMP(test_for_ipi r0, r2, r6, lr)
 	ALT_UP_B(9997f)
 	movne	r1, sp
 	adrne	lr, BSYM(1b)
 	bne	do_IPI
 
 #ifdef CONFIG_LOCAL_TIMERS
-	test_for_ltirq r0, r6, r5, lr
+	test_for_ltirq r0, r2, r6, lr
 	movne	r0, sp
 	adrne	lr, BSYM(1b)
 	bne	do_local_timer
@@ -40,7 +40,7 @@
 	.align	5
 	.global \symbol_name
 \symbol_name:
-	mov	r4, lr
+	mov	r8, lr
 	arch_irq_handler_default
-	mov     pc, r4
+	mov     pc, r8
 	.endm
diff --git a/arch/arm/include/asm/pmu.h b/arch/arm/include/asm/pmu.h
index 7544ce6b481..67c70a31a1b 100644
--- a/arch/arm/include/asm/pmu.h
+++ b/arch/arm/include/asm/pmu.h
@@ -52,7 +52,7 @@ reserve_pmu(enum arm_pmu_type device);
  * a cookie.
  */
 extern int
-release_pmu(struct platform_device *pdev);
+release_pmu(enum arm_pmu_type type);
 
 /**
  * init_pmu() - Initialise the PMU.
diff --git a/arch/arm/include/asm/proc-fns.h b/arch/arm/include/asm/proc-fns.h
index 8ec535e11fd..633d1cb84d8 100644
--- a/arch/arm/include/asm/proc-fns.h
+++ b/arch/arm/include/asm/proc-fns.h
@@ -82,13 +82,13 @@ extern void cpu_do_switch_mm(unsigned long pgd_phys, struct mm_struct *mm);
 extern void cpu_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext);
 extern void cpu_reset(unsigned long addr) __attribute__((noreturn));
 #else
-#define cpu_proc_init()			processor._proc_init()
-#define cpu_proc_fin()			processor._proc_fin()
-#define cpu_reset(addr)			processor.reset(addr)
-#define cpu_do_idle()			processor._do_idle()
-#define cpu_dcache_clean_area(addr,sz)	processor.dcache_clean_area(addr,sz)
-#define cpu_set_pte_ext(ptep,pte,ext)	processor.set_pte_ext(ptep,pte,ext)
-#define cpu_do_switch_mm(pgd,mm)	processor.switch_mm(pgd,mm)
+#define cpu_proc_init			processor._proc_init
+#define cpu_proc_fin			processor._proc_fin
+#define cpu_reset			processor.reset
+#define cpu_do_idle			processor._do_idle
+#define cpu_dcache_clean_area		processor.dcache_clean_area
+#define cpu_set_pte_ext			processor.set_pte_ext
+#define cpu_do_switch_mm		processor.switch_mm
 #endif
 
 extern void cpu_resume(void);
diff --git a/arch/arm/include/asm/scatterlist.h b/arch/arm/include/asm/scatterlist.h
index 2f87870d934..cefdb8f898a 100644
--- a/arch/arm/include/asm/scatterlist.h
+++ b/arch/arm/include/asm/scatterlist.h
@@ -1,6 +1,10 @@
 #ifndef _ASMARM_SCATTERLIST_H
 #define _ASMARM_SCATTERLIST_H
 
+#ifdef CONFIG_ARM_HAS_SG_CHAIN
+#define ARCH_HAS_SG_CHAIN
+#endif
+
 #include <asm/memory.h>
 #include <asm/types.h>
 #include <asm-generic/scatterlist.h>
diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h
index ee2ad8ae07a..915696dd9c7 100644
--- a/arch/arm/include/asm/setup.h
+++ b/arch/arm/include/asm/setup.h
@@ -187,12 +187,16 @@ struct tagtable {
 
 #define __tag __used __attribute__((__section__(".taglist.init")))
 #define __tagtable(tag, fn) \
-static struct tagtable __tagtable_##fn __tag = { tag, fn }
+static const struct tagtable __tagtable_##fn __tag = { tag, fn }
 
 /*
  * Memory map description
  */
-#define NR_BANKS 8
+#ifdef CONFIG_ARCH_EP93XX
+# define NR_BANKS 16
+#else
+# define NR_BANKS 8
+#endif
 
 struct membank {
 	phys_addr_t start;
diff --git a/arch/arm/include/asm/suspend.h b/arch/arm/include/asm/suspend.h
new file mode 100644
index 00000000000..b0e4e1a0231
--- /dev/null
+++ b/arch/arm/include/asm/suspend.h
@@ -0,0 +1,22 @@
+#ifndef __ASM_ARM_SUSPEND_H
+#define __ASM_ARM_SUSPEND_H
+
+#include <asm/memory.h>
+#include <asm/tlbflush.h>
+
+extern void cpu_resume(void);
+
+/*
+ * Hide the first two arguments to __cpu_suspend - these are an implementation
+ * detail which platform code shouldn't have to know about.
+ */
+static inline int cpu_suspend(unsigned long arg, int (*fn)(unsigned long))
+{
+	extern int __cpu_suspend(int, long, unsigned long,
+				 int (*)(unsigned long));
+	int ret = __cpu_suspend(0, PHYS_OFFSET - PAGE_OFFSET, arg, fn);
+	flush_tlb_all();
+	return ret;
+}
+
+#endif
diff --git a/arch/arm/include/asm/tcm.h b/arch/arm/include/asm/tcm.h
index 5929ef5d927..8578d726ad7 100644
--- a/arch/arm/include/asm/tcm.h
+++ b/arch/arm/include/asm/tcm.h
@@ -27,5 +27,7 @@
 
 void *tcm_alloc(size_t len);
 void tcm_free(void *addr, size_t len);
+bool tcm_dtcm_present(void);
+bool tcm_itcm_present(void);
 
 #endif
diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h
index d2005de383b..8077145698f 100644
--- a/arch/arm/include/asm/tlbflush.h
+++ b/arch/arm/include/asm/tlbflush.h
@@ -34,16 +34,12 @@
 #define TLB_V6_D_ASID	(1 << 17)
 #define TLB_V6_I_ASID	(1 << 18)
 
-#define TLB_BTB		(1 << 28)
-
 /* Unified Inner Shareable TLB operations (ARMv7 MP extensions) */
 #define TLB_V7_UIS_PAGE	(1 << 19)
 #define TLB_V7_UIS_FULL (1 << 20)
 #define TLB_V7_UIS_ASID (1 << 21)
 
-/* Inner Shareable BTB operation (ARMv7 MP extensions) */
-#define TLB_V7_IS_BTB	(1 << 22)
-
+#define TLB_BARRIER	(1 << 28)
 #define TLB_L2CLEAN_FR	(1 << 29)		/* Feroceon */
 #define TLB_DCLEAN	(1 << 30)
 #define TLB_WB		(1 << 31)
@@ -58,7 +54,7 @@
  *	  v4wb  - ARMv4 with write buffer without I TLB flush entry instruction
  *	  v4wbi - ARMv4 with write buffer with I TLB flush entry instruction
  *	  fr    - Feroceon (v4wbi with non-outer-cacheable page table walks)
- *	  fa    - Faraday (v4 with write buffer with UTLB and branch target buffer (BTB))
+ *	  fa    - Faraday (v4 with write buffer with UTLB)
  *	  v6wbi - ARMv6 with write buffer with I TLB flush entry instruction
  *	  v7wbi - identical to v6wbi
  */
@@ -99,7 +95,7 @@
 # define v4_always_flags	(-1UL)
 #endif
 
-#define fa_tlb_flags	(TLB_WB | TLB_BTB | TLB_DCLEAN | \
+#define fa_tlb_flags	(TLB_WB | TLB_DCLEAN | TLB_BARRIER | \
 			 TLB_V4_U_FULL | TLB_V4_U_PAGE)
 
 #ifdef CONFIG_CPU_TLB_FA
@@ -166,7 +162,7 @@
 # define v4wb_always_flags	(-1UL)
 #endif
 
-#define v6wbi_tlb_flags (TLB_WB | TLB_DCLEAN | TLB_BTB | \
+#define v6wbi_tlb_flags (TLB_WB | TLB_DCLEAN | TLB_BARRIER | \
 			 TLB_V6_I_FULL | TLB_V6_D_FULL | \
 			 TLB_V6_I_PAGE | TLB_V6_D_PAGE | \
 			 TLB_V6_I_ASID | TLB_V6_D_ASID)
@@ -184,9 +180,9 @@
 # define v6wbi_always_flags	(-1UL)
 #endif
 
-#define v7wbi_tlb_flags_smp	(TLB_WB | TLB_DCLEAN | TLB_V7_IS_BTB | \
+#define v7wbi_tlb_flags_smp	(TLB_WB | TLB_DCLEAN | TLB_BARRIER | \
 			 TLB_V7_UIS_FULL | TLB_V7_UIS_PAGE | TLB_V7_UIS_ASID)
-#define v7wbi_tlb_flags_up	(TLB_WB | TLB_DCLEAN | TLB_BTB | \
+#define v7wbi_tlb_flags_up	(TLB_WB | TLB_DCLEAN | TLB_BARRIER | \
 			 TLB_V6_U_FULL | TLB_V6_U_PAGE | TLB_V6_U_ASID)
 
 #ifdef CONFIG_CPU_TLB_V7
@@ -341,15 +337,7 @@ static inline void local_flush_tlb_all(void)
 	if (tlb_flag(TLB_V7_UIS_FULL))
 		asm("mcr p15, 0, %0, c8, c3, 0" : : "r" (zero) : "cc");
 
-	if (tlb_flag(TLB_BTB)) {
-		/* flush the branch target cache */
-		asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
-		dsb();
-		isb();
-	}
-	if (tlb_flag(TLB_V7_IS_BTB)) {
-		/* flush the branch target cache */
-		asm("mcr p15, 0, %0, c7, c1, 6" : : "r" (zero) : "cc");
+	if (tlb_flag(TLB_BARRIER)) {
 		dsb();
 		isb();
 	}
@@ -389,17 +377,8 @@ static inline void local_flush_tlb_mm(struct mm_struct *mm)
 		asm("mcr p15, 0, %0, c8, c3, 2" : : "r" (asid) : "cc");
 #endif
 
-	if (tlb_flag(TLB_BTB)) {
-		/* flush the branch target cache */
-		asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
-		dsb();
-	}
-	if (tlb_flag(TLB_V7_IS_BTB)) {
-		/* flush the branch target cache */
-		asm("mcr p15, 0, %0, c7, c1, 6" : : "r" (zero) : "cc");
+	if (tlb_flag(TLB_BARRIER))
 		dsb();
-		isb();
-	}
 }
 
 static inline void
@@ -439,17 +418,8 @@ local_flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
 		asm("mcr p15, 0, %0, c8, c3, 1" : : "r" (uaddr) : "cc");
 #endif
 
-	if (tlb_flag(TLB_BTB)) {
-		/* flush the branch target cache */
-		asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
-		dsb();
-	}
-	if (tlb_flag(TLB_V7_IS_BTB)) {
-		/* flush the branch target cache */
-		asm("mcr p15, 0, %0, c7, c1, 6" : : "r" (zero) : "cc");
+	if (tlb_flag(TLB_BARRIER))
 		dsb();
-		isb();
-	}
 }
 
 static inline void local_flush_tlb_kernel_page(unsigned long kaddr)
@@ -482,15 +452,7 @@ static inline void local_flush_tlb_kernel_page(unsigned long kaddr)
 	if (tlb_flag(TLB_V7_UIS_PAGE))
 		asm("mcr p15, 0, %0, c8, c3, 1" : : "r" (kaddr) : "cc");
 
-	if (tlb_flag(TLB_BTB)) {
-		/* flush the branch target cache */
-		asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
-		dsb();
-		isb();
-	}
-	if (tlb_flag(TLB_V7_IS_BTB)) {
-		/* flush the branch target cache */
-		asm("mcr p15, 0, %0, c7, c1, 6" : : "r" (zero) : "cc");
+	if (tlb_flag(TLB_BARRIER)) {
 		dsb();
 		isb();
 	}
diff --git a/arch/arm/include/asm/traps.h b/arch/arm/include/asm/traps.h
index f90756dc16d..5b29a667362 100644
--- a/arch/arm/include/asm/traps.h
+++ b/arch/arm/include/asm/traps.h
@@ -3,6 +3,9 @@
 
 #include <linux/list.h>
 
+struct pt_regs;
+struct task_struct;
+
 struct undef_hook {
 	struct list_head node;
 	u32 instr_mask;
diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c
index 927522cfc12..16baba2e436 100644
--- a/arch/arm/kernel/asm-offsets.c
+++ b/arch/arm/kernel/asm-offsets.c
@@ -59,6 +59,9 @@ int main(void)
   DEFINE(TI_TP_VALUE,		offsetof(struct thread_info, tp_value));
   DEFINE(TI_FPSTATE,		offsetof(struct thread_info, fpstate));
   DEFINE(TI_VFPSTATE,		offsetof(struct thread_info, vfpstate));
+#ifdef CONFIG_SMP
+  DEFINE(VFP_CPU,		offsetof(union vfp_state, hard.cpu));
+#endif
 #ifdef CONFIG_ARM_THUMBEE
   DEFINE(TI_THUMBEE_STATE,	offsetof(struct thread_info, thumbee_state));
 #endif
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 8f9ab5c9015..a87cbf889ff 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -29,21 +29,53 @@
 #include <asm/entry-macro-multi.S>
 
 /*
- * Interrupt handling.  Preserves r7, r8, r9
+ * Interrupt handling.
  */
 	.macro	irq_handler
 #ifdef CONFIG_MULTI_IRQ_HANDLER
-	ldr	r5, =handle_arch_irq
+	ldr	r1, =handle_arch_irq
 	mov	r0, sp
-	ldr	r5, [r5]
+	ldr	r1, [r1]
 	adr	lr, BSYM(9997f)
-	teq	r5, #0
-	movne	pc, r5
+	teq	r1, #0
+	movne	pc, r1
 #endif
 	arch_irq_handler_default
 9997:
 	.endm
 
+	.macro	pabt_helper
+	@ PABORT handler takes pt_regs in r2, fault address in r4 and psr in r5
+#ifdef MULTI_PABORT
+	ldr	ip, .LCprocfns
+	mov	lr, pc
+	ldr	pc, [ip, #PROCESSOR_PABT_FUNC]
+#else
+	bl	CPU_PABORT_HANDLER
+#endif
+	.endm
+
+	.macro	dabt_helper
+
+	@
+	@ Call the processor-specific abort handler:
+	@
+	@  r2 - pt_regs
+	@  r4 - aborted context pc
+	@  r5 - aborted context psr
+	@
+	@ The abort handler must return the aborted address in r0, and
+	@ the fault status register in r1.  r9 must be preserved.
+	@
+#ifdef MULTI_DABORT
+	ldr	ip, .LCprocfns
+	mov	lr, pc
+	ldr	pc, [ip, #PROCESSOR_DABT_FUNC]
+#else
+	bl	CPU_DABORT_HANDLER
+#endif
+	.endm
+
 #ifdef CONFIG_KPROBES
 	.section	.kprobes.text,"ax",%progbits
 #else
@@ -126,106 +158,74 @@ ENDPROC(__und_invalid)
  SPFIX(	subeq	sp, sp, #4	)
 	stmia	sp, {r1 - r12}
 
-	ldmia	r0, {r1 - r3}
-	add	r5, sp, #S_SP - 4	@ here for interlock avoidance
-	mov	r4, #-1			@  ""  ""      ""       ""
-	add	r0, sp, #(S_FRAME_SIZE + \stack_hole - 4)
- SPFIX(	addeq	r0, r0, #4	)
-	str	r1, [sp, #-4]!		@ save the "real" r0 copied
+	ldmia	r0, {r3 - r5}
+	add	r7, sp, #S_SP - 4	@ here for interlock avoidance
+	mov	r6, #-1			@  ""  ""      ""       ""
+	add	r2, sp, #(S_FRAME_SIZE + \stack_hole - 4)
+ SPFIX(	addeq	r2, r2, #4	)
+	str	r3, [sp, #-4]!		@ save the "real" r0 copied
 					@ from the exception stack
 
-	mov	r1, lr
+	mov	r3, lr
 
 	@
 	@ We are now ready to fill in the remaining blanks on the stack:
 	@
-	@  r0 - sp_svc
-	@  r1 - lr_svc
-	@  r2 - lr_<exception>, already fixed up for correct return/restart
-	@  r3 - spsr_<exception>
-	@  r4 - orig_r0 (see pt_regs definition in ptrace.h)
+	@  r2 - sp_svc
+	@  r3 - lr_svc
+	@  r4 - lr_<exception>, already fixed up for correct return/restart
+	@  r5 - spsr_<exception>
+	@  r6 - orig_r0 (see pt_regs definition in ptrace.h)
 	@
-	stmia	r5, {r0 - r4}
+	stmia	r7, {r2 - r6}
+
+#ifdef CONFIG_TRACE_IRQFLAGS
+	bl	trace_hardirqs_off
+#endif
 	.endm
 
 	.align	5
 __dabt_svc:
 	svc_entry
-
-	@
-	@ get ready to re-enable interrupts if appropriate
-	@
-	mrs	r9, cpsr
-	tst	r3, #PSR_I_BIT
-	biceq	r9, r9, #PSR_I_BIT
-
-	@
-	@ Call the processor-specific abort handler:
-	@
-	@  r2 - aborted context pc
-	@  r3 - aborted context cpsr
-	@
-	@ The abort handler must return the aborted address in r0, and
-	@ the fault status register in r1.  r9 must be preserved.
-	@
-#ifdef MULTI_DABORT
-	ldr	r4, .LCprocfns
-	mov	lr, pc
-	ldr	pc, [r4, #PROCESSOR_DABT_FUNC]
-#else
-	bl	CPU_DABORT_HANDLER
-#endif
-
-	@
-	@ set desired IRQ state, then call main handler
-	@
-	debug_entry r1
-	msr	cpsr_c, r9
 	mov	r2, sp
-	bl	do_DataAbort
+	dabt_helper
 
 	@
 	@ IRQs off again before pulling preserved data off the stack
 	@
 	disable_irq_notrace
 
-	@
-	@ restore SPSR and restart the instruction
-	@
-	ldr	r2, [sp, #S_PSR]
-	svc_exit r2				@ return from exception
+#ifdef CONFIG_TRACE_IRQFLAGS
+	tst	r5, #PSR_I_BIT
+	bleq	trace_hardirqs_on
+	tst	r5, #PSR_I_BIT
+	blne	trace_hardirqs_off
+#endif
+	svc_exit r5				@ return from exception
  UNWIND(.fnend		)
 ENDPROC(__dabt_svc)
 
 	.align	5
 __irq_svc:
 	svc_entry
+	irq_handler
 
-#ifdef CONFIG_TRACE_IRQFLAGS
-	bl	trace_hardirqs_off
-#endif
 #ifdef CONFIG_PREEMPT
 	get_thread_info tsk
 	ldr	r8, [tsk, #TI_PREEMPT]		@ get preempt count
-	add	r7, r8, #1			@ increment it
-	str	r7, [tsk, #TI_PREEMPT]
-#endif
-
-	irq_handler
-#ifdef CONFIG_PREEMPT
-	str	r8, [tsk, #TI_PREEMPT]		@ restore preempt count
 	ldr	r0, [tsk, #TI_FLAGS]		@ get flags
 	teq	r8, #0				@ if preempt count != 0
 	movne	r0, #0				@ force flags to 0
 	tst	r0, #_TIF_NEED_RESCHED
 	blne	svc_preempt
 #endif
-	ldr	r4, [sp, #S_PSR]		@ irqs are already disabled
+
 #ifdef CONFIG_TRACE_IRQFLAGS
-	tst	r4, #PSR_I_BIT
-	bleq	trace_hardirqs_on
+	@ The parent context IRQs must have been enabled to get here in
+	@ the first place, so there's no point checking the PSR I bit.
+	bl	trace_hardirqs_on
 #endif
-	svc_exit r4				@ return from exception
+	svc_exit r5				@ return from exception
  UNWIND(.fnend		)
 ENDPROC(__irq_svc)
 
@@ -251,7 +251,6 @@ __und_svc:
 #else
 	svc_entry
 #endif
-
 	@
 	@ call emulation code, which returns using r9 if it has emulated
 	@ the instruction, or the more conventional lr if we are to treat
@@ -260,15 +259,16 @@ __und_svc:
 	@  r0 - instruction
 	@
 #ifndef	CONFIG_THUMB2_KERNEL
-	ldr	r0, [r2, #-4]
+	ldr	r0, [r4, #-4]
 #else
-	ldrh	r0, [r2, #-2]			@ Thumb instruction at LR - 2
+	ldrh	r0, [r4, #-2]			@ Thumb instruction at LR - 2
 	and	r9, r0, #0xf800
 	cmp	r9, #0xe800			@ 32-bit instruction if xx >= 0
-	ldrhhs	r9, [r2]			@ bottom 16 bits
+	ldrhhs	r9, [r4]			@ bottom 16 bits
 	orrhs	r0, r9, r0, lsl #16
 #endif
 	adr	r9, BSYM(1f)
+	mov	r2, r4
 	bl	call_fpe
 
 	mov	r0, sp				@ struct pt_regs *regs
@@ -282,45 +282,35 @@ __und_svc:
 	@
 	@ restore SPSR and restart the instruction
 	@
-	ldr	r2, [sp, #S_PSR]		@ Get SVC cpsr
-	svc_exit r2				@ return from exception
+	ldr	r5, [sp, #S_PSR]		@ Get SVC cpsr
+#ifdef CONFIG_TRACE_IRQFLAGS
+	tst	r5, #PSR_I_BIT
+	bleq	trace_hardirqs_on
+	tst	r5, #PSR_I_BIT
+	blne	trace_hardirqs_off
+#endif
+	svc_exit r5				@ return from exception
  UNWIND(.fnend		)
 ENDPROC(__und_svc)
 
 	.align	5
 __pabt_svc:
 	svc_entry
-
-	@
-	@ re-enable interrupts if appropriate
-	@
-	mrs	r9, cpsr
-	tst	r3, #PSR_I_BIT
-	biceq	r9, r9, #PSR_I_BIT
-
-	mov	r0, r2			@ pass address of aborted instruction.
-#ifdef MULTI_PABORT
-	ldr	r4, .LCprocfns
-	mov	lr, pc
-	ldr	pc, [r4, #PROCESSOR_PABT_FUNC]
-#else
-	bl	CPU_PABORT_HANDLER
-#endif
-	debug_entry r1
-	msr	cpsr_c, r9			@ Maybe enable interrupts
 	mov	r2, sp				@ regs
-	bl	do_PrefetchAbort		@ call abort handler
+	pabt_helper
 
 	@
 	@ IRQs off again before pulling preserved data off the stack
 	@
 	disable_irq_notrace
 
-	@
-	@ restore SPSR and restart the instruction
-	@
-	ldr	r2, [sp, #S_PSR]
-	svc_exit r2				@ return from exception
+#ifdef CONFIG_TRACE_IRQFLAGS
+	tst	r5, #PSR_I_BIT
+	bleq	trace_hardirqs_on
+	tst	r5, #PSR_I_BIT
+	blne	trace_hardirqs_off
+#endif
+	svc_exit r5				@ return from exception
  UNWIND(.fnend		)
 ENDPROC(__pabt_svc)
 
@@ -351,23 +341,23 @@ ENDPROC(__pabt_svc)
  ARM(	stmib	sp, {r1 - r12}	)
  THUMB(	stmia	sp, {r0 - r12}	)
 
-	ldmia	r0, {r1 - r3}
+	ldmia	r0, {r3 - r5}
 	add	r0, sp, #S_PC		@ here for interlock avoidance
-	mov	r4, #-1			@  ""  ""     ""        ""
+	mov	r6, #-1			@  ""  ""     ""        ""
 
-	str	r1, [sp]		@ save the "real" r0 copied
+	str	r3, [sp]		@ save the "real" r0 copied
 					@ from the exception stack
 
 	@
 	@ We are now ready to fill in the remaining blanks on the stack:
 	@
-	@  r2 - lr_<exception>, already fixed up for correct return/restart
-	@  r3 - spsr_<exception>
-	@  r4 - orig_r0 (see pt_regs definition in ptrace.h)
+	@  r4 - lr_<exception>, already fixed up for correct return/restart
+	@  r5 - spsr_<exception>
+	@  r6 - orig_r0 (see pt_regs definition in ptrace.h)
 	@
 	@ Also, separately save sp_usr and lr_usr
 	@
-	stmia	r0, {r2 - r4}
+	stmia	r0, {r4 - r6}
  ARM(	stmdb	r0, {sp, lr}^			)
  THUMB(	store_user_sp_lr r0, r1, S_SP - S_PC	)
 
@@ -380,6 +370,10 @@ ENDPROC(__pabt_svc)
 	@ Clear FP to mark the first stack frame
 	@
 	zero_fp
+
+#ifdef CONFIG_IRQSOFF_TRACER
+	bl	trace_hardirqs_off
+#endif
 	.endm
 
 	.macro	kuser_cmpxchg_check
@@ -391,7 +385,7 @@ ENDPROC(__pabt_svc)
 	@ if it was interrupted in a critical region.  Here we
 	@ perform a quick test inline since it should be false
 	@ 99.9999% of the time.  The rest is done out of line.
-	cmp	r2, #TASK_SIZE
+	cmp	r4, #TASK_SIZE
 	blhs	kuser_cmpxchg64_fixup
 #endif
 #endif
@@ -401,32 +395,9 @@ ENDPROC(__pabt_svc)
 __dabt_usr:
 	usr_entry
 	kuser_cmpxchg_check
-
-	@
-	@ Call the processor-specific abort handler:
-	@
-	@  r2 - aborted context pc
-	@  r3 - aborted context cpsr
-	@
-	@ The abort handler must return the aborted address in r0, and
-	@ the fault status register in r1.
-	@
-#ifdef MULTI_DABORT
-	ldr	r4, .LCprocfns
-	mov	lr, pc
-	ldr	pc, [r4, #PROCESSOR_DABT_FUNC]
-#else
-	bl	CPU_DABORT_HANDLER
-#endif
-
-	@
-	@ IRQs on, then call the main handler
-	@
-	debug_entry r1
-	enable_irq
 	mov	r2, sp
-	adr	lr, BSYM(ret_from_exception)
-	b	do_DataAbort
+	dabt_helper
+	b	ret_from_exception
  UNWIND(.fnend		)
 ENDPROC(__dabt_usr)
 
@@ -434,28 +405,8 @@ ENDPROC(__dabt_usr)
 __irq_usr:
 	usr_entry
 	kuser_cmpxchg_check
-
-#ifdef CONFIG_IRQSOFF_TRACER
-	bl	trace_hardirqs_off
-#endif
-
-	get_thread_info tsk
-#ifdef CONFIG_PREEMPT
-	ldr	r8, [tsk, #TI_PREEMPT]		@ get preempt count
-	add	r7, r8, #1			@ increment it
-	str	r7, [tsk, #TI_PREEMPT]
-#endif
-
 	irq_handler
-#ifdef CONFIG_PREEMPT
-	ldr	r0, [tsk, #TI_PREEMPT]
-	str	r8, [tsk, #TI_PREEMPT]
-	teq	r0, r7
- ARM(	strne	r0, [r0, -r0]	)
- THUMB(	movne	r0, #0		)
- THUMB(	strne	r0, [r0]	)
-#endif
-
+	get_thread_info tsk
 	mov	why, #0
 	b	ret_to_user_from_irq
  UNWIND(.fnend		)
@@ -467,6 +418,9 @@ ENDPROC(__irq_usr)
 __und_usr:
 	usr_entry
 
+	mov	r2, r4
+	mov	r3, r5
+
 	@
 	@ fall through to the emulation code, which returns using r9 if
 	@ it has emulated the instruction, or the more conventional lr
@@ -682,19 +636,8 @@ ENDPROC(__und_usr_unknown)
 	.align	5
 __pabt_usr:
 	usr_entry
-
-	mov	r0, r2			@ pass address of aborted instruction.
-#ifdef MULTI_PABORT
-	ldr	r4, .LCprocfns
-	mov	lr, pc
-	ldr	pc, [r4, #PROCESSOR_PABT_FUNC]
-#else
-	bl	CPU_PABORT_HANDLER
-#endif
-	debug_entry r1
-	enable_irq				@ Enable interrupts
 	mov	r2, sp				@ regs
-	bl	do_PrefetchAbort		@ call abort handler
+	pabt_helper
  UNWIND(.fnend		)
 	/* fall through */
 /*
@@ -839,13 +782,13 @@ __kuser_cmpxchg64:				@ 0xffff0f60
 	.text
 kuser_cmpxchg64_fixup:
 	@ Called from kuser_cmpxchg_fixup.
-	@ r2 = address of interrupted insn (must be preserved).
+	@ r4 = address of interrupted insn (must be preserved).
 	@ sp = saved regs. r7 and r8 are clobbered.
 	@ 1b = first critical insn, 2b = last critical insn.
-	@ If r2 >= 1b and r2 <= 2b then saved pc_usr is set to 1b.
+	@ If r4 >= 1b and r4 <= 2b then saved pc_usr is set to 1b.
 	mov	r7, #0xffff0fff
 	sub	r7, r7, #(0xffff0fff - (0xffff0f60 + (1b - __kuser_cmpxchg64)))
-	subs	r8, r2, r7
+	subs	r8, r4, r7
 	rsbcss	r8, r8, #(2b - 1b)
 	strcs	r7, [sp, #S_PC]
 #if __LINUX_ARM_ARCH__ < 6
@@ -915,13 +858,13 @@ __kuser_cmpxchg:				@ 0xffff0fc0
 	.text
 kuser_cmpxchg32_fixup:
 	@ Called from kuser_cmpxchg_check macro.
-	@ r2 = address of interrupted insn (must be preserved).
+	@ r4 = address of interrupted insn (must be preserved).
 	@ sp = saved regs. r7 and r8 are clobbered.
 	@ 1b = first critical insn, 2b = last critical insn.
-	@ If r2 >= 1b and r2 <= 2b then saved pc_usr is set to 1b.
+	@ If r4 >= 1b and r4 <= 2b then saved pc_usr is set to 1b.
 	mov	r7, #0xffff0fff
 	sub	r7, r7, #(0xffff0fff - (0xffff0fc0 + (1b - __kuser_cmpxchg)))
-	subs	r8, r2, r7
+	subs	r8, r4, r7
 	rsbcss	r8, r8, #(2b - 1b)
 	strcs	r7, [sp, #S_PC]
 	mov	pc, lr
diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S
index 83e29adced6..9a8531eadd3 100644
--- a/arch/arm/kernel/entry-header.S
+++ b/arch/arm/kernel/entry-header.S
@@ -163,25 +163,6 @@
 	.endm
 #endif	/* !CONFIG_THUMB2_KERNEL */
 
-	@
-	@ Debug exceptions are taken as prefetch or data aborts.
-	@ We must disable preemption during the handler so that
-	@ we can access the debug registers safely.
-	@
-	.macro	debug_entry, fsr
-#if defined(CONFIG_HAVE_HW_BREAKPOINT) && defined(CONFIG_PREEMPT)
-	ldr	r4, =0x40f		@ mask out fsr.fs
-	and	r5, r4, \fsr
-	cmp	r5, #2			@ debug exception
-	bne	1f
-	get_thread_info r10
-	ldr	r6, [r10, #TI_PREEMPT]	@ get preempt count
-	add	r11, r6, #1		@ increment it
-	str	r11, [r10, #TI_PREEMPT]
-1:
-#endif
-	.endm
-
 /*
  * These are the registers used in the syscall handler, and allow us to
  * have in theory up to 7 arguments to a function - r0 to r6.
diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S
index 6b1e0ad9ec3..d46f25968be 100644
--- a/arch/arm/kernel/head-nommu.S
+++ b/arch/arm/kernel/head-nommu.S
@@ -32,8 +32,16 @@
  * numbers for r1.
  *
  */
+	.arm
+
 	__HEAD
 ENTRY(stext)
+
+ THUMB(	adr	r9, BSYM(1f)	)	@ Kernel is always entered in ARM.
+ THUMB(	bx	r9		)	@ If this is a Thumb-2 kernel,
+ THUMB(	.thumb			)	@ switch to Thumb now.
+ THUMB(1:			)
+
 	setmode	PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9 @ ensure svc mode
 						@ and irqs disabled
 #ifndef CONFIG_CPU_CP15
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 278c1b0ebb2..742b6108a00 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -71,8 +71,16 @@
  * crap here - that's what the boot loader (or in extreme, well justified
  * circumstances, zImage) is for.
  */
+	.arm
+
 	__HEAD
 ENTRY(stext)
+
+ THUMB(	adr	r9, BSYM(1f)	)	@ Kernel is always entered in ARM.
+ THUMB(	bx	r9		)	@ If this is a Thumb-2 kernel,
+ THUMB(	.thumb			)	@ switch to Thumb now.
+ THUMB(1:			)
+
 	setmode	PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9 @ ensure svc mode
 						@ and irqs disabled
 	mrc	p15, 0, r9, c0, c0		@ get processor id
diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c
index 87acc25d7a3..a927ca1f556 100644
--- a/arch/arm/kernel/hw_breakpoint.c
+++ b/arch/arm/kernel/hw_breakpoint.c
@@ -796,7 +796,7 @@ unlock:
 
 /*
  * Called from either the Data Abort Handler [watchpoint] or the
- * Prefetch Abort Handler [breakpoint] with preemption disabled.
+ * Prefetch Abort Handler [breakpoint] with interrupts disabled.
  */
 static int hw_breakpoint_pending(unsigned long addr, unsigned int fsr,
 				 struct pt_regs *regs)
@@ -804,8 +804,10 @@ static int hw_breakpoint_pending(unsigned long addr, unsigned int fsr,
 	int ret = 0;
 	u32 dscr;
 
-	/* We must be called with preemption disabled. */
-	WARN_ON(preemptible());
+	preempt_disable();
+
+	if (interrupts_enabled(regs))
+		local_irq_enable();
 
 	/* We only handle watchpoints and hardware breakpoints. */
 	ARM_DBG_READ(c1, 0, dscr);
@@ -824,10 +826,6 @@ static int hw_breakpoint_pending(unsigned long addr, unsigned int fsr,
 		ret = 1; /* Unhandled fault. */
 	}
 
-	/*
-	 * Re-enable preemption after it was disabled in the
-	 * low-level exception handling code.
-	 */
 	preempt_enable();
 
 	return ret;
diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
index 31326996dfe..53c9c2610cb 100644
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -435,7 +435,7 @@ armpmu_reserve_hardware(void)
 			if (irq >= 0)
 				free_irq(irq, NULL);
 		}
-		release_pmu(pmu_device);
+		release_pmu(ARM_PMU_DEVICE_CPU);
 		pmu_device = NULL;
 	}
 
@@ -454,7 +454,7 @@ armpmu_release_hardware(void)
 	}
 	armpmu->stop();
 
-	release_pmu(pmu_device);
+	release_pmu(ARM_PMU_DEVICE_CPU);
 	pmu_device = NULL;
 }
 
diff --git a/arch/arm/kernel/pmu.c b/arch/arm/kernel/pmu.c
index 2c79eec1926..2b70709376c 100644
--- a/arch/arm/kernel/pmu.c
+++ b/arch/arm/kernel/pmu.c
@@ -17,6 +17,7 @@
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/of_device.h>
 #include <linux/platform_device.h>
 
 #include <asm/pmu.h>
@@ -25,36 +26,88 @@ static volatile long pmu_lock;
 
 static struct platform_device *pmu_devices[ARM_NUM_PMU_DEVICES];
 
-static int __devinit pmu_device_probe(struct platform_device *pdev)
+static int __devinit pmu_register(struct platform_device *pdev,
+					enum arm_pmu_type type)
 {
-
-	if (pdev->id < 0 || pdev->id >= ARM_NUM_PMU_DEVICES) {
+	if (type < 0 || type >= ARM_NUM_PMU_DEVICES) {
 		pr_warning("received registration request for unknown "
-				"device %d\n", pdev->id);
+				"device %d\n", type);
 		return -EINVAL;
 	}
 
-	if (pmu_devices[pdev->id])
-		pr_warning("registering new PMU device type %d overwrites "
-				"previous registration!\n", pdev->id);
-	else
-		pr_info("registered new PMU device of type %d\n",
-				pdev->id);
+	if (pmu_devices[type]) {
+		pr_warning("rejecting duplicate registration of PMU device "
+			"type %d.", type);
+		return -ENOSPC;
+	}
 
-	pmu_devices[pdev->id] = pdev;
+	pr_info("registered new PMU device of type %d\n", type);
+	pmu_devices[type] = pdev;
 	return 0;
 }
 
-static struct platform_driver pmu_driver = {
+#define OF_MATCH_PMU(_name, _type) {	\
+	.compatible = _name,		\
+	.data = (void *)_type,		\
+}
+
+#define OF_MATCH_CPU(name)	OF_MATCH_PMU(name, ARM_PMU_DEVICE_CPU)
+
+static struct of_device_id armpmu_of_device_ids[] = {
+	OF_MATCH_CPU("arm,cortex-a9-pmu"),
+	OF_MATCH_CPU("arm,cortex-a8-pmu"),
+	OF_MATCH_CPU("arm,arm1136-pmu"),
+	OF_MATCH_CPU("arm,arm1176-pmu"),
+	{},
+};
+
+#define PLAT_MATCH_PMU(_name, _type) {	\
+	.name		= _name,	\
+	.driver_data	= _type,	\
+}
+
+#define PLAT_MATCH_CPU(_name)	PLAT_MATCH_PMU(_name, ARM_PMU_DEVICE_CPU)
+
+static struct platform_device_id armpmu_plat_device_ids[] = {
+	PLAT_MATCH_CPU("arm-pmu"),
+	{},
+};
+
+enum arm_pmu_type armpmu_device_type(struct platform_device *pdev)
+{
+	const struct of_device_id	*of_id;
+	const struct platform_device_id *pdev_id;
+
+	/* provided by of_device_id table */
+	if (pdev->dev.of_node) {
+		of_id = of_match_device(armpmu_of_device_ids, &pdev->dev);
+		BUG_ON(!of_id);
+		return (enum arm_pmu_type)of_id->data;
+	}
+
+	/* Provided by platform_device_id table */
+	pdev_id = platform_get_device_id(pdev);
+	BUG_ON(!pdev_id);
+	return pdev_id->driver_data;
+}
+
+static int __devinit armpmu_device_probe(struct platform_device *pdev)
+{
+	return pmu_register(pdev, armpmu_device_type(pdev));
+}
+
+static struct platform_driver armpmu_driver = {
 	.driver		= {
 		.name	= "arm-pmu",
+		.of_match_table = armpmu_of_device_ids,
 	},
-	.probe		= pmu_device_probe,
+	.probe		= armpmu_device_probe,
+	.id_table	= armpmu_plat_device_ids,
 };
 
 static int __init register_pmu_driver(void)
 {
-	return platform_driver_register(&pmu_driver);
+	return platform_driver_register(&armpmu_driver);
 }
 device_initcall(register_pmu_driver);
 
@@ -77,11 +130,11 @@ reserve_pmu(enum arm_pmu_type device)
 EXPORT_SYMBOL_GPL(reserve_pmu);
 
 int
-release_pmu(struct platform_device *pdev)
+release_pmu(enum arm_pmu_type device)
 {
-	if (WARN_ON(pdev != pmu_devices[pdev->id]))
+	if (WARN_ON(!pmu_devices[device]))
 		return -EINVAL;
-	clear_bit_unlock(pdev->id, &pmu_lock);
+	clear_bit_unlock(device, &pmu_lock);
 	return 0;
 }
 EXPORT_SYMBOL_GPL(release_pmu);
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index f59653d6765..70bca649e92 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -343,54 +343,6 @@ static void __init feat_v6_fixup(void)
 		elf_hwcap &= ~HWCAP_TLS;
 }
 
-static void __init setup_processor(void)
-{
-	struct proc_info_list *list;
-
-	/*
-	 * locate processor in the list of supported processor
-	 * types.  The linker builds this table for us from the
-	 * entries in arch/arm/mm/proc-*.S
-	 */
-	list = lookup_processor_type(read_cpuid_id());
-	if (!list) {
-		printk("CPU configuration botched (ID %08x), unable "
-		       "to continue.\n", read_cpuid_id());
-		while (1);
-	}
-
-	cpu_name = list->cpu_name;
-
-#ifdef MULTI_CPU
-	processor = *list->proc;
-#endif
-#ifdef MULTI_TLB
-	cpu_tlb = *list->tlb;
-#endif
-#ifdef MULTI_USER
-	cpu_user = *list->user;
-#endif
-#ifdef MULTI_CACHE
-	cpu_cache = *list->cache;
-#endif
-
-	printk("CPU: %s [%08x] revision %d (ARMv%s), cr=%08lx\n",
-	       cpu_name, read_cpuid_id(), read_cpuid_id() & 15,
-	       proc_arch[cpu_architecture()], cr_alignment);
-
-	sprintf(init_utsname()->machine, "%s%c", list->arch_name, ENDIANNESS);
-	sprintf(elf_platform, "%s%c", list->elf_name, ENDIANNESS);
-	elf_hwcap = list->elf_hwcap;
-#ifndef CONFIG_ARM_THUMB
-	elf_hwcap &= ~HWCAP_THUMB;
-#endif
-
-	feat_v6_fixup();
-
-	cacheid_init();
-	cpu_proc_init();
-}
-
 /*
  * cpu_init - initialise one CPU.
  *
@@ -406,6 +358,8 @@ void cpu_init(void)
 		BUG();
 	}
 
+	cpu_proc_init();
+
 	/*
 	 * Define the placement constraint for the inline asm directive below.
 	 * In Thumb-2, msr with an immediate value is not allowed.
@@ -442,6 +396,54 @@ void cpu_init(void)
 	    : "r14");
 }
 
+static void __init setup_processor(void)
+{
+	struct proc_info_list *list;
+
+	/*
+	 * locate processor in the list of supported processor
+	 * types.  The linker builds this table for us from the
+	 * entries in arch/arm/mm/proc-*.S
+	 */
+	list = lookup_processor_type(read_cpuid_id());
+	if (!list) {
+		printk("CPU configuration botched (ID %08x), unable "
+		       "to continue.\n", read_cpuid_id());
+		while (1);
+	}
+
+	cpu_name = list->cpu_name;
+
+#ifdef MULTI_CPU
+	processor = *list->proc;
+#endif
+#ifdef MULTI_TLB
+	cpu_tlb = *list->tlb;
+#endif
+#ifdef MULTI_USER
+	cpu_user = *list->user;
+#endif
+#ifdef MULTI_CACHE
+	cpu_cache = *list->cache;
+#endif
+
+	printk("CPU: %s [%08x] revision %d (ARMv%s), cr=%08lx\n",
+	       cpu_name, read_cpuid_id(), read_cpuid_id() & 15,
+	       proc_arch[cpu_architecture()], cr_alignment);
+
+	sprintf(init_utsname()->machine, "%s%c", list->arch_name, ENDIANNESS);
+	sprintf(elf_platform, "%s%c", list->elf_name, ENDIANNESS);
+	elf_hwcap = list->elf_hwcap;
+#ifndef CONFIG_ARM_THUMB
+	elf_hwcap &= ~HWCAP_THUMB;
+#endif
+
+	feat_v6_fixup();
+
+	cacheid_init();
+	cpu_init();
+}
+
 void __init dump_machine_table(void)
 {
 	struct machine_desc *p;
@@ -915,7 +917,6 @@ void __init setup_arch(char **cmdline_p)
 #endif
 	reserve_crashkernel();
 
-	cpu_init();
 	tcm_init();
 
 #ifdef CONFIG_ZONE_DMA
diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S
index 6398ead9d1c..dc902f2c684 100644
--- a/arch/arm/kernel/sleep.S
+++ b/arch/arm/kernel/sleep.S
@@ -10,64 +10,61 @@
 /*
  * Save CPU state for a suspend
  *  r1 = v:p offset
- *  r3 = virtual return function
- * Note: sp is decremented to allocate space for CPU state on stack
- * r0-r3,r9,r10,lr corrupted
+ *  r2 = suspend function arg0
+ *  r3 = suspend function
  */
-ENTRY(cpu_suspend)
-	mov	r9, lr
+ENTRY(__cpu_suspend)
+	stmfd	sp!, {r4 - r11, lr}
 #ifdef MULTI_CPU
 	ldr	r10, =processor
-	mov	r2, sp			@ current virtual SP
-	ldr	r0, [r10, #CPU_SLEEP_SIZE] @ size of CPU sleep state
+	ldr	r5, [r10, #CPU_SLEEP_SIZE] @ size of CPU sleep state
 	ldr	ip, [r10, #CPU_DO_RESUME] @ virtual resume function
-	sub	sp, sp, r0		@ allocate CPU state on stack
-	mov	r0, sp			@ save pointer
+#else
+	ldr	r5, =cpu_suspend_size
+	ldr	ip, =cpu_do_resume
+#endif
+	mov	r6, sp			@ current virtual SP
+	sub	sp, sp, r5		@ allocate CPU state on stack
+	mov	r0, sp			@ save pointer to CPU save block
 	add	ip, ip, r1		@ convert resume fn to phys
-	stmfd	sp!, {r1, r2, r3, ip}	@ save v:p, virt SP, retfn, phys resume fn
-	ldr	r3, =sleep_save_sp
-	add	r2, sp, r1		@ convert SP to phys
+	stmfd	sp!, {r1, r6, ip}	@ save v:p, virt SP, phys resume fn
+	ldr	r5, =sleep_save_sp
+	add	r6, sp, r1		@ convert SP to phys
+	stmfd	sp!, {r2, r3}		@ save suspend func arg and pointer
 #ifdef CONFIG_SMP
 	ALT_SMP(mrc p15, 0, lr, c0, c0, 5)
 	ALT_UP(mov lr, #0)
 	and	lr, lr, #15
-	str	r2, [r3, lr, lsl #2]	@ save phys SP
+	str	r6, [r5, lr, lsl #2]	@ save phys SP
 #else
-	str	r2, [r3]		@ save phys SP
+	str	r6, [r5]		@ save phys SP
 #endif
+#ifdef MULTI_CPU
 	mov	lr, pc
 	ldr	pc, [r10, #CPU_DO_SUSPEND] @ save CPU state
 #else
-	mov	r2, sp			@ current virtual SP
-	ldr	r0, =cpu_suspend_size
-	sub	sp, sp, r0		@ allocate CPU state on stack
-	mov	r0, sp			@ save pointer
-	stmfd	sp!, {r1, r2, r3}	@ save v:p, virt SP, return fn
-	ldr	r3, =sleep_save_sp
-	add	r2, sp, r1		@ convert SP to phys
-#ifdef CONFIG_SMP
-	ALT_SMP(mrc p15, 0, lr, c0, c0, 5)
-	ALT_UP(mov lr, #0)
-	and	lr, lr, #15
-	str	r2, [r3, lr, lsl #2]	@ save phys SP
-#else
-	str	r2, [r3]		@ save phys SP
-#endif
 	bl	cpu_do_suspend
 #endif
 
 	@ flush data cache
 #ifdef MULTI_CACHE
 	ldr	r10, =cpu_cache
-	mov	lr, r9
+	mov	lr, pc
 	ldr	pc, [r10, #CACHE_FLUSH_KERN_ALL]
 #else
-	mov	lr, r9
-	b	__cpuc_flush_kern_all
+	bl	__cpuc_flush_kern_all
 #endif
-ENDPROC(cpu_suspend)
+	adr	lr, BSYM(cpu_suspend_abort)
+	ldmfd	sp!, {r0, pc}		@ call suspend fn
+ENDPROC(__cpu_suspend)
 	.ltorg
 
+cpu_suspend_abort:
+	ldmia	sp!, {r1 - r3}		@ pop v:p, virt SP, phys resume fn
+	mov	sp, r2
+	ldmfd	sp!, {r4 - r11, pc}
+ENDPROC(cpu_suspend_abort)
+
 /*
  * r0 = control register value
  * r1 = v:p offset (preserved by cpu_do_resume)
@@ -97,7 +94,9 @@ ENDPROC(cpu_resume_turn_mmu_on)
 cpu_resume_after_mmu:
 	str	r5, [r2, r4, lsl #2]	@ restore old mapping
 	mcr	p15, 0, r0, c1, c0, 0	@ turn on D-cache
-	mov	pc, lr
+	bl	cpu_init		@ restore the und/abt/irq banked regs
+	mov	r0, #0			@ return zero on success
+	ldmfd	sp!, {r4 - r11, pc}
 ENDPROC(cpu_resume_after_mmu)
 
 /*
@@ -120,20 +119,11 @@ ENTRY(cpu_resume)
 	ldr	r0, sleep_save_sp	@ stack phys addr
 #endif
 	setmode	PSR_I_BIT | PSR_F_BIT | SVC_MODE, r1  @ set SVC, irqs off
-#ifdef MULTI_CPU
-	@ load v:p, stack, return fn, resume fn
-  ARM(	ldmia	r0!, {r1, sp, lr, pc}	)
-THUMB(	ldmia	r0!, {r1, r2, r3, r4}	)
+	@ load v:p, stack, resume fn
+  ARM(	ldmia	r0!, {r1, sp, pc}	)
+THUMB(	ldmia	r0!, {r1, r2, r3}	)
 THUMB(	mov	sp, r2			)
-THUMB(	mov	lr, r3			)
-THUMB(	bx	r4			)
-#else
-	@ load v:p, stack, return fn
-  ARM(	ldmia	r0!, {r1, sp, lr}	)
-THUMB(	ldmia	r0!, {r1, r2, lr}	)
-THUMB(	mov	sp, r2			)
-	b	cpu_do_resume
-#endif
+THUMB(	bx	r3			)
 ENDPROC(cpu_resume)
 
 sleep_save_sp:
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 8e3a000ee0a..5991a1a980c 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -370,8 +370,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	 */
 	if (max_cpus > ncores)
 		max_cpus = ncores;
-
-	if (max_cpus > 1) {
+	if (ncores > 1 && max_cpus) {
 		/*
 		 * Enable the local timer or broadcast device for the
 		 * boot CPU, but only if we have more than one CPU.
@@ -379,6 +378,14 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 		percpu_timer_setup();
 
 		/*
+		 * Initialise the present map, which describes the set of CPUs
+		 * actually populated at the present time. A platform should
+		 * re-initialize the map in platform_smp_prepare_cpus() if
+		 * present != possible (e.g. physical hotplug).
+		 */
+		init_cpu_present(&cpu_possible_map);
+
+		/*
 		 * Initialise the SCU if there are more than one CPU
 		 * and let them know where to start.
 		 */
diff --git a/arch/arm/kernel/smp_scu.c b/arch/arm/kernel/smp_scu.c
index a1e757c3439..79ed5e7f204 100644
--- a/arch/arm/kernel/smp_scu.c
+++ b/arch/arm/kernel/smp_scu.c
@@ -20,6 +20,7 @@
 #define SCU_INVALIDATE		0x0c
 #define SCU_FPGA_REVISION	0x10
 
+#ifdef CONFIG_SMP
 /*
  * Get the number of CPU cores from the SCU configuration
  */
@@ -50,6 +51,7 @@ void __init scu_enable(void __iomem *scu_base)
 	 */
 	flush_cache_all();
 }
+#endif
 
 /*
  * Set the executing CPUs power mode as defined.  This will be in
diff --git a/arch/arm/kernel/tcm.c b/arch/arm/kernel/tcm.c
index f5cf660eefc..30e302d33e0 100644
--- a/arch/arm/kernel/tcm.c
+++ b/arch/arm/kernel/tcm.c
@@ -19,6 +19,8 @@
 #include "tcm.h"
 
 static struct gen_pool *tcm_pool;
+static bool dtcm_present;
+static bool itcm_present;
 
 /* TCM section definitions from the linker */
 extern char __itcm_start, __sitcm_text, __eitcm_text;
@@ -90,6 +92,18 @@ void tcm_free(void *addr, size_t len)
 }
 EXPORT_SYMBOL(tcm_free);
 
+bool tcm_dtcm_present(void)
+{
+	return dtcm_present;
+}
+EXPORT_SYMBOL(tcm_dtcm_present);
+
+bool tcm_itcm_present(void)
+{
+	return itcm_present;
+}
+EXPORT_SYMBOL(tcm_itcm_present);
+
 static int __init setup_tcm_bank(u8 type, u8 bank, u8 banks,
 				  u32 *offset)
 {
@@ -134,6 +148,10 @@ static int __init setup_tcm_bank(u8 type, u8 bank, u8 banks,
 			(tcm_region & 1) ? "" : "not ");
 	}
 
+	/* Not much fun you can do with a size 0 bank */
+	if (tcm_size == 0)
+		return 0;
+
 	/* Force move the TCM bank to where we want it, enable */
 	tcm_region = *offset | (tcm_region & 0x00000ffeU) | 1;
 
@@ -165,12 +183,20 @@ void __init tcm_init(void)
 	u32 tcm_status = read_cpuid_tcmstatus();
 	u8 dtcm_banks = (tcm_status >> 16) & 0x03;
 	u8 itcm_banks = (tcm_status & 0x03);
+	size_t dtcm_code_sz = &__edtcm_data - &__sdtcm_data;
+	size_t itcm_code_sz = &__eitcm_text - &__sitcm_text;
 	char *start;
 	char *end;
 	char *ram;
 	int ret;
 	int i;
 
+	/* Values greater than 2 for D/ITCM banks are "reserved" */
+	if (dtcm_banks > 2)
+		dtcm_banks = 0;
+	if (itcm_banks > 2)
+		itcm_banks = 0;
+
 	/* Setup DTCM if present */
 	if (dtcm_banks > 0) {
 		for (i = 0; i < dtcm_banks; i++) {
@@ -178,6 +204,13 @@ void __init tcm_init(void)
 			if (ret)
 				return;
 		}
+		/* This means you compiled more code than fits into DTCM */
+		if (dtcm_code_sz > (dtcm_end - DTCM_OFFSET)) {
+			pr_info("CPU DTCM: %u bytes of code compiled to "
+				"DTCM but only %lu bytes of DTCM present\n",
+				dtcm_code_sz, (dtcm_end - DTCM_OFFSET));
+			goto no_dtcm;
+		}
 		dtcm_res.end = dtcm_end - 1;
 		request_resource(&iomem_resource, &dtcm_res);
 		dtcm_iomap[0].length = dtcm_end - DTCM_OFFSET;
@@ -186,12 +219,16 @@ void __init tcm_init(void)
 		start = &__sdtcm_data;
 		end   = &__edtcm_data;
 		ram   = &__dtcm_start;
-		/* This means you compiled more code than fits into DTCM */
-		BUG_ON((end - start) > (dtcm_end - DTCM_OFFSET));
-		memcpy(start, ram, (end-start));
-		pr_debug("CPU DTCM: copied data from %p - %p\n", start, end);
+		memcpy(start, ram, dtcm_code_sz);
+		pr_debug("CPU DTCM: copied data from %p - %p\n",
+			 start, end);
+		dtcm_present = true;
+	} else if (dtcm_code_sz) {
+		pr_info("CPU DTCM: %u bytes of code compiled to DTCM but no "
+			"DTCM banks present in CPU\n", dtcm_code_sz);
 	}
 
+no_dtcm:
 	/* Setup ITCM if present */
 	if (itcm_banks > 0) {
 		for (i = 0; i < itcm_banks; i++) {
@@ -199,6 +236,13 @@ void __init tcm_init(void)
 			if (ret)
 				return;
 		}
+		/* This means you compiled more code than fits into ITCM */
+		if (itcm_code_sz > (itcm_end - ITCM_OFFSET)) {
+			pr_info("CPU ITCM: %u bytes of code compiled to "
+				"ITCM but only %lu bytes of ITCM present\n",
+				itcm_code_sz, (itcm_end - ITCM_OFFSET));
+			return;
+		}
 		itcm_res.end = itcm_end - 1;
 		request_resource(&iomem_resource, &itcm_res);
 		itcm_iomap[0].length = itcm_end - ITCM_OFFSET;
@@ -207,10 +251,13 @@ void __init tcm_init(void)
 		start = &__sitcm_text;
 		end   = &__eitcm_text;
 		ram   = &__itcm_start;
-		/* This means you compiled more code than fits into ITCM */
-		BUG_ON((end - start) > (itcm_end - ITCM_OFFSET));
-		memcpy(start, ram, (end-start));
-		pr_debug("CPU ITCM: copied code from %p - %p\n", start, end);
+		memcpy(start, ram, itcm_code_sz);
+		pr_debug("CPU ITCM: copied code from %p - %p\n",
+			 start, end);
+		itcm_present = true;
+	} else if (itcm_code_sz) {
+		pr_info("CPU ITCM: %u bytes of code compiled to ITCM but no "
+			"ITCM banks present in CPU\n", itcm_code_sz);
 	}
 }
 
@@ -221,7 +268,6 @@ void __init tcm_init(void)
  */
 static int __init setup_tcm_pool(void)
 {
-	u32 tcm_status = read_cpuid_tcmstatus();
 	u32 dtcm_pool_start = (u32) &__edtcm_data;
 	u32 itcm_pool_start = (u32) &__eitcm_text;
 	int ret;
@@ -236,7 +282,7 @@ static int __init setup_tcm_pool(void)
 	pr_debug("Setting up TCM memory pool\n");
 
 	/* Add the rest of DTCM to the TCM pool */
-	if (tcm_status & (0x03 << 16)) {
+	if (dtcm_present) {
 		if (dtcm_pool_start < dtcm_end) {
 			ret = gen_pool_add(tcm_pool, dtcm_pool_start,
 					   dtcm_end - dtcm_pool_start, -1);
@@ -253,7 +299,7 @@ static int __init setup_tcm_pool(void)
 	}
 
 	/* Add the rest of ITCM to the TCM pool */
-	if (tcm_status & 0x03) {
+	if (itcm_present) {
 		if (itcm_pool_start < itcm_end) {
 			ret = gen_pool_add(tcm_pool, itcm_pool_start,
 					   itcm_end - itcm_pool_start, -1);
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index e5287f21bad..bf977f8514f 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -38,57 +38,6 @@ jiffies = jiffies_64 + 4;
 
 SECTIONS
 {
-#ifdef CONFIG_XIP_KERNEL
-	. = XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR);
-#else
-	. = PAGE_OFFSET + TEXT_OFFSET;
-#endif
-
-	.init : {			/* Init code and data		*/
-		_stext = .;
-		_sinittext = .;
-			HEAD_TEXT
-			INIT_TEXT
-			ARM_EXIT_KEEP(EXIT_TEXT)
-		_einittext = .;
-		ARM_CPU_DISCARD(PROC_INFO)
-		__arch_info_begin = .;
-			*(.arch.info.init)
-		__arch_info_end = .;
-		__tagtable_begin = .;
-			*(.taglist.init)
-		__tagtable_end = .;
-#ifdef CONFIG_SMP_ON_UP
-		__smpalt_begin = .;
-			*(.alt.smp.init)
-		__smpalt_end = .;
-#endif
-
-		__pv_table_begin = .;
-			*(.pv_table)
-		__pv_table_end = .;
-
-		INIT_SETUP(16)
-
-		INIT_CALLS
-		CON_INITCALL
-		SECURITY_INITCALL
-		INIT_RAM_FS
-
-#ifndef CONFIG_XIP_KERNEL
-		__init_begin = _stext;
-		INIT_DATA
-		ARM_EXIT_KEEP(EXIT_DATA)
-#endif
-	}
-
-	PERCPU_SECTION(32)
-
-#ifndef CONFIG_XIP_KERNEL
-	. = ALIGN(PAGE_SIZE);
-	__init_end = .;
-#endif
-
 	/*
 	 * unwind exit sections must be discarded before the rest of the
 	 * unwind sections get included.
@@ -106,10 +55,22 @@ SECTIONS
 		*(.fixup)
 		*(__ex_table)
 #endif
+#ifndef CONFIG_SMP_ON_UP
+		*(.alt.smp.init)
+#endif
 	}
 
+#ifdef CONFIG_XIP_KERNEL
+	. = XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR);
+#else
+	. = PAGE_OFFSET + TEXT_OFFSET;
+#endif
+	.head.text : {
+		_text = .;
+		HEAD_TEXT
+	}
 	.text : {			/* Real text segment		*/
-		_text = .;		/* Text and read-only data	*/
+		_stext = .;		/* Text and read-only data	*/
 			__exception_text_start = .;
 			*(.exception.text)
 			__exception_text_end = .;
@@ -122,8 +83,6 @@ SECTIONS
 			*(.fixup)
 #endif
 			*(.gnu.warning)
-			*(.rodata)
-			*(.rodata.*)
 			*(.glue_7)
 			*(.glue_7t)
 		. = ALIGN(4);
@@ -152,10 +111,63 @@ SECTIONS
 
 	_etext = .;			/* End of text and rodata section */
 
+#ifndef CONFIG_XIP_KERNEL
+	. = ALIGN(PAGE_SIZE);
+	__init_begin = .;
+#endif
+
+	INIT_TEXT_SECTION(8)
+	.exit.text : {
+		ARM_EXIT_KEEP(EXIT_TEXT)
+	}
+	.init.proc.info : {
+		ARM_CPU_DISCARD(PROC_INFO)
+	}
+	.init.arch.info : {
+		__arch_info_begin = .;
+		*(.arch.info.init)
+		__arch_info_end = .;
+	}
+	.init.tagtable : {
+		__tagtable_begin = .;
+		*(.taglist.init)
+		__tagtable_end = .;
+	}
+#ifdef CONFIG_SMP_ON_UP
+	.init.smpalt : {
+		__smpalt_begin = .;
+		*(.alt.smp.init)
+		__smpalt_end = .;
+	}
+#endif
+	.init.pv_table : {
+		__pv_table_begin = .;
+		*(.pv_table)
+		__pv_table_end = .;
+	}
+	.init.data : {
+#ifndef CONFIG_XIP_KERNEL
+		INIT_DATA
+#endif
+		INIT_SETUP(16)
+		INIT_CALLS
+		CON_INITCALL
+		SECURITY_INITCALL
+		INIT_RAM_FS
+	}
+#ifndef CONFIG_XIP_KERNEL
+	.exit.data : {
+		ARM_EXIT_KEEP(EXIT_DATA)
+	}
+#endif
+
+	PERCPU_SECTION(32)
+
 #ifdef CONFIG_XIP_KERNEL
 	__data_loc = ALIGN(4);		/* location in binary */
 	. = PAGE_OFFSET + TEXT_OFFSET;
 #else
+	__init_end = .;
 	. = ALIGN(THREAD_SIZE);
 	__data_loc = .;
 #endif
@@ -270,12 +282,6 @@ SECTIONS
 
 	/* Default discards */
 	DISCARDS
-
-#ifndef CONFIG_SMP_ON_UP
-	/DISCARD/ : {
-		*(.alt.smp.init)
-	}
-#endif
 }
 
 /*
diff --git a/arch/arm/mach-bcmring/include/mach/entry-macro.S b/arch/arm/mach-bcmring/include/mach/entry-macro.S
index 7d393ca010a..94c950d783b 100644
--- a/arch/arm/mach-bcmring/include/mach/entry-macro.S
+++ b/arch/arm/mach-bcmring/include/mach/entry-macro.S
@@ -80,7 +80,3 @@
 
 		.macro  arch_ret_to_user, tmp1, tmp2
 		.endm
-
-		.macro	irq_prio_table
-		.endm
-
diff --git a/arch/arm/mach-davinci/include/mach/entry-macro.S b/arch/arm/mach-davinci/include/mach/entry-macro.S
index fbdebc7cb40..e14c0dc0e12 100644
--- a/arch/arm/mach-davinci/include/mach/entry-macro.S
+++ b/arch/arm/mach-davinci/include/mach/entry-macro.S
@@ -46,6 +46,3 @@
 #endif
 1002:
 		.endm
-
-		.macro	irq_prio_table
-		.endm
diff --git a/arch/arm/mach-exynos4/platsmp.c b/arch/arm/mach-exynos4/platsmp.c
index c5e65a02be8..b68d5bdf04c 100644
--- a/arch/arm/mach-exynos4/platsmp.c
+++ b/arch/arm/mach-exynos4/platsmp.c
@@ -154,14 +154,6 @@ void __init smp_init_cpus(void)
 
 void __init platform_smp_prepare_cpus(unsigned int max_cpus)
 {
-	int i;
-
-	/*
-	 * Initialise the present map, which describes the set of CPUs
-	 * actually populated at the present time.
-	 */
-	for (i = 0; i < max_cpus; i++)
-		set_cpu_present(i, true);
 
 	scu_enable(scu_base_addr());
 
diff --git a/arch/arm/mach-exynos4/pm.c b/arch/arm/mach-exynos4/pm.c
index 8755ca8dd48..533c28f758c 100644
--- a/arch/arm/mach-exynos4/pm.c
+++ b/arch/arm/mach-exynos4/pm.c
@@ -280,7 +280,7 @@ static struct sleep_save exynos4_l2cc_save[] = {
 	SAVE_ITEM(S5P_VA_L2CC + L2X0_AUX_CTRL),
 };
 
-void exynos4_cpu_suspend(void)
+static int exynos4_cpu_suspend(unsigned long arg)
 {
 	unsigned long tmp;
 	unsigned long mask = 0xFFFFFFFF;
diff --git a/arch/arm/mach-exynos4/sleep.S b/arch/arm/mach-exynos4/sleep.S
index 6b62425417a..0984078f1eb 100644
--- a/arch/arm/mach-exynos4/sleep.S
+++ b/arch/arm/mach-exynos4/sleep.S
@@ -33,28 +33,6 @@
 	.text
 
 	/*
-	 * s3c_cpu_save
-	 *
-	 * entry:
-	 *	r1 = v:p offset
-	 */
-
-ENTRY(s3c_cpu_save)
-
-	stmfd	sp!, { r3 - r12, lr }
-	ldr	r3, =resume_with_mmu
-	bl	cpu_suspend
-
-	ldr	r0, =pm_cpu_sleep
-	ldr	r0, [ r0 ]
-	mov	pc, r0
-
-resume_with_mmu:
-	ldmfd	sp!, { r3 - r12, pc }
-
-	.ltorg
-
-	/*
 	 * sleep magic, to allow the bootloader to check for an valid
 	 * image to resume to. Must be the first word before the
 	 * s3c_cpu_resume entry.
diff --git a/arch/arm/mach-h720x/include/mach/entry-macro.S b/arch/arm/mach-h720x/include/mach/entry-macro.S
index 6d3b917c4a1..c3948e5ba4a 100644
--- a/arch/arm/mach-h720x/include/mach/entry-macro.S
+++ b/arch/arm/mach-h720x/include/mach/entry-macro.S
@@ -57,9 +57,6 @@
 		tst     \irqstat, #1		       @ bit 0 should be set
 		.endm
 
-		.macro  irq_prio_table
-		.endm
-
 #else
 #error hynix processor selection missmatch
 #endif
diff --git a/arch/arm/mach-lpc32xx/include/mach/entry-macro.S b/arch/arm/mach-lpc32xx/include/mach/entry-macro.S
index 870227c9660..b725f6c9397 100644
--- a/arch/arm/mach-lpc32xx/include/mach/entry-macro.S
+++ b/arch/arm/mach-lpc32xx/include/mach/entry-macro.S
@@ -41,7 +41,3 @@
 	rsb	\irqnr, \irqnr, #31
 	teq	\irqstat, #0
 	.endm
-
-	.macro	irq_prio_table
-	.endm
-
diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c
index 2034098cf01..315b9f36532 100644
--- a/arch/arm/mach-msm/platsmp.c
+++ b/arch/arm/mach-msm/platsmp.c
@@ -157,12 +157,4 @@ void __init smp_init_cpus(void)
 
 void __init platform_smp_prepare_cpus(unsigned int max_cpus)
 {
-	int i;
-
-	/*
-	 * Initialise the present map, which describes the set of CPUs
-	 * actually populated at the present time.
-	 */
-	for (i = 0; i < max_cpus; i++)
-		set_cpu_present(i, true);
 }
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index da53ba3917c..aab884fecc5 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -286,14 +286,15 @@ void omap3_save_scratchpad_contents(void)
 	scratchpad_contents.boot_config_ptr = 0x0;
 	if (cpu_is_omap3630())
 		scratchpad_contents.public_restore_ptr =
-			virt_to_phys(get_omap3630_restore_pointer());
+			virt_to_phys(omap3_restore_3630);
 	else if (omap_rev() != OMAP3430_REV_ES3_0 &&
 					omap_rev() != OMAP3430_REV_ES3_1)
 		scratchpad_contents.public_restore_ptr =
-			virt_to_phys(get_restore_pointer());
+			virt_to_phys(omap3_restore);
 	else
 		scratchpad_contents.public_restore_ptr =
-			virt_to_phys(get_es3_restore_pointer());
+			virt_to_phys(omap3_restore_es3);
+
 	if (omap_type() == OMAP2_DEVICE_TYPE_GP)
 		scratchpad_contents.secure_ram_restore_ptr = 0x0;
 	else
diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h
index a016c8b59e0..d4ef75d5a38 100644
--- a/arch/arm/mach-omap2/control.h
+++ b/arch/arm/mach-omap2/control.h
@@ -386,9 +386,9 @@ extern void omap4_ctrl_pad_writel(u32 val, u16 offset);
 
 extern void omap3_save_scratchpad_contents(void);
 extern void omap3_clear_scratchpad_contents(void);
-extern u32 *get_restore_pointer(void);
-extern u32 *get_es3_restore_pointer(void);
-extern u32 *get_omap3630_restore_pointer(void);
+extern void omap3_restore(void);
+extern void omap3_restore_es3(void);
+extern void omap3_restore_3630(void);
 extern u32 omap3_arm_context[128];
 extern void omap3_control_save_context(void);
 extern void omap3_control_restore_context(void);
diff --git a/arch/arm/mach-omap2/include/mach/entry-macro.S b/arch/arm/mach-omap2/include/mach/entry-macro.S
index a48690b9099..ceb8b7e593d 100644
--- a/arch/arm/mach-omap2/include/mach/entry-macro.S
+++ b/arch/arm/mach-omap2/include/mach/entry-macro.S
@@ -165,6 +165,3 @@
 #endif
 
 #endif	/* MULTI_OMAP2 */
-
-		.macro	irq_prio_table
-		.endm
diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
index ecfe93c4b58..ce65e9329c7 100644
--- a/arch/arm/mach-omap2/omap-smp.c
+++ b/arch/arm/mach-omap2/omap-smp.c
@@ -125,14 +125,6 @@ void __init smp_init_cpus(void)
 
 void __init platform_smp_prepare_cpus(unsigned int max_cpus)
 {
-	int i;
-
-	/*
-	 * Initialise the present map, which describes the set of CPUs
-	 * actually populated at the present time.
-	 */
-	for (i = 0; i < max_cpus; i++)
-		set_cpu_present(i, true);
 
 	/*
 	 * Initialise the SCU and wake up the secondary core using
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index 45bcfce7735..04ee5664612 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -88,18 +88,28 @@ extern int pm_dbg_regset_init(int reg_set);
 #define pm_dbg_regset_init(reg_set) do {} while (0);
 #endif /* CONFIG_PM_DEBUG */
 
+/* 24xx */
 extern void omap24xx_idle_loop_suspend(void);
+extern unsigned int omap24xx_idle_loop_suspend_sz;
 
 extern void omap24xx_cpu_suspend(u32 dll_ctrl, void __iomem *sdrc_dlla_ctrl,
 					void __iomem *sdrc_power);
-extern void omap34xx_cpu_suspend(u32 *addr, int save_state);
-extern int save_secure_ram_context(u32 *addr);
-extern void omap3_save_scratchpad_contents(void);
+extern unsigned int omap24xx_cpu_suspend_sz;
 
-extern unsigned int omap24xx_idle_loop_suspend_sz;
+/* 3xxx */
+extern void omap34xx_cpu_suspend(int save_state);
+
+/* omap3_do_wfi function pointer and size, for copy to SRAM */
+extern void omap3_do_wfi(void);
+extern unsigned int omap3_do_wfi_sz;
+/* ... and its pointer from SRAM after copy */
+extern void (*omap3_do_wfi_sram)(void);
+
+/* save_secure_ram_context function pointer and size, for copy to SRAM */
+extern int save_secure_ram_context(u32 *addr);
 extern unsigned int save_secure_ram_context_sz;
-extern unsigned int omap24xx_cpu_suspend_sz;
-extern unsigned int omap34xx_cpu_suspend_sz;
+
+extern void omap3_save_scratchpad_contents(void);
 
 #define PM_RTA_ERRATUM_i608		(1 << 0)
 #define PM_SDRC_WAKEUP_ERRATUM_i583	(1 << 1)
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index c155c9d1c82..b77d82665ab 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -31,6 +31,8 @@
 #include <linux/console.h>
 #include <trace/events/power.h>
 
+#include <asm/suspend.h>
+
 #include <plat/sram.h>
 #include "clockdomain.h"
 #include "powerdomain.h"
@@ -40,8 +42,6 @@
 #include <plat/gpmc.h>
 #include <plat/dma.h>
 
-#include <asm/tlbflush.h>
-
 #include "cm2xxx_3xxx.h"
 #include "cm-regbits-34xx.h"
 #include "prm-regbits-34xx.h"
@@ -64,11 +64,6 @@ static inline bool is_suspending(void)
 }
 #endif
 
-/* Scratchpad offsets */
-#define OMAP343X_TABLE_ADDRESS_OFFSET	   0xc4
-#define OMAP343X_TABLE_VALUE_OFFSET	   0xc0
-#define OMAP343X_CONTROL_REG_VALUE_OFFSET  0xc8
-
 /* pm34xx errata defined in pm.h */
 u16 pm34xx_errata;
 
@@ -83,9 +78,8 @@ struct power_state {
 
 static LIST_HEAD(pwrst_list);
 
-static void (*_omap_sram_idle)(u32 *addr, int save_state);
-
 static int (*_omap_save_secure_sram)(u32 *addr);
+void (*omap3_do_wfi_sram)(void);
 
 static struct powerdomain *mpu_pwrdm, *neon_pwrdm;
 static struct powerdomain *core_pwrdm, *per_pwrdm;
@@ -312,28 +306,25 @@ static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-/* Function to restore the table entry that was modified for enabling MMU */
-static void restore_table_entry(void)
+static void omap34xx_save_context(u32 *save)
 {
-	void __iomem *scratchpad_address;
-	u32 previous_value, control_reg_value;
-	u32 *address;
+	u32 val;
 
-	scratchpad_address = OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD);
+	/* Read Auxiliary Control Register */
+	asm("mrc p15, 0, %0, c1, c0, 1" : "=r" (val));
+	*save++ = 1;
+	*save++ = val;
 
-	/* Get address of entry that was modified */
-	address = (u32 *)__raw_readl(scratchpad_address +
-				     OMAP343X_TABLE_ADDRESS_OFFSET);
-	/* Get the previous value which needs to be restored */
-	previous_value = __raw_readl(scratchpad_address +
-				     OMAP343X_TABLE_VALUE_OFFSET);
-	address = __va(address);
-	*address = previous_value;
-	flush_tlb_all();
-	control_reg_value = __raw_readl(scratchpad_address
-					+ OMAP343X_CONTROL_REG_VALUE_OFFSET);
-	/* This will enable caches and prediction */
-	set_cr(control_reg_value);
+	/* Read L2 AUX ctrl register */
+	asm("mrc p15, 1, %0, c9, c0, 2" : "=r" (val));
+	*save++ = 1;
+	*save++ = val;
+}
+
+static int omap34xx_do_sram_idle(unsigned long save_state)
+{
+	omap34xx_cpu_suspend(save_state);
+	return 0;
 }
 
 void omap_sram_idle(void)
@@ -352,9 +343,6 @@ void omap_sram_idle(void)
 	int core_prev_state, per_prev_state;
 	u32 sdrc_pwr = 0;
 
-	if (!_omap_sram_idle)
-		return;
-
 	pwrdm_clear_all_prev_pwrst(mpu_pwrdm);
 	pwrdm_clear_all_prev_pwrst(neon_pwrdm);
 	pwrdm_clear_all_prev_pwrst(core_pwrdm);
@@ -432,12 +420,16 @@ void omap_sram_idle(void)
 		sdrc_pwr = sdrc_read_reg(SDRC_POWER);
 
 	/*
-	 * omap3_arm_context is the location where ARM registers
-	 * get saved. The restore path then reads from this
-	 * location and restores them back.
+	 * omap3_arm_context is the location where some ARM context
+	 * get saved. The rest is placed on the stack, and restored
+	 * from there before resuming.
 	 */
-	_omap_sram_idle(omap3_arm_context, save_state);
-	cpu_init();
+	if (save_state)
+		omap34xx_save_context(omap3_arm_context);
+	if (save_state == 1 || save_state == 3)
+		cpu_suspend(save_state, omap34xx_do_sram_idle);
+	else
+		omap34xx_do_sram_idle(save_state);
 
 	/* Restore normal SDRC POWER settings */
 	if (omap_rev() >= OMAP3430_REV_ES3_0 &&
@@ -445,10 +437,6 @@ void omap_sram_idle(void)
 	    core_next_state == PWRDM_POWER_OFF)
 		sdrc_write_reg(sdrc_pwr, SDRC_POWER);
 
-	/* Restore table entry modified during MMU restoration */
-	if (pwrdm_read_prev_pwrst(mpu_pwrdm) == PWRDM_POWER_OFF)
-		restore_table_entry();
-
 	/* CORE */
 	if (core_next_state < PWRDM_POWER_ON) {
 		core_prev_state = pwrdm_read_prev_pwrst(core_pwrdm);
@@ -852,10 +840,17 @@ static int __init clkdms_setup(struct clockdomain *clkdm, void *unused)
 	return 0;
 }
 
+/*
+ * Push functions to SRAM
+ *
+ * The minimum set of functions is pushed to SRAM for execution:
+ * - omap3_do_wfi for erratum i581 WA,
+ * - save_secure_ram_context for security extensions.
+ */
 void omap_push_sram_idle(void)
 {
-	_omap_sram_idle = omap_sram_push(omap34xx_cpu_suspend,
-					omap34xx_cpu_suspend_sz);
+	omap3_do_wfi_sram = omap_sram_push(omap3_do_wfi, omap3_do_wfi_sz);
+
 	if (omap_type() != OMAP2_DEVICE_TYPE_GP)
 		_omap_save_secure_sram = omap_sram_push(save_secure_ram_context,
 				save_secure_ram_context_sz);
@@ -920,7 +915,6 @@ static int __init omap3_pm_init(void)
 	per_clkdm = clkdm_lookup("per_clkdm");
 	core_clkdm = clkdm_lookup("core_clkdm");
 
-	omap_push_sram_idle();
 #ifdef CONFIG_SUSPEND
 	suspend_set_ops(&omap_pm_ops);
 #endif /* CONFIG_SUSPEND */
diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S
index 63f10669571..f2ea1bd1c69 100644
--- a/arch/arm/mach-omap2/sleep34xx.S
+++ b/arch/arm/mach-omap2/sleep34xx.S
@@ -74,46 +74,6 @@
  * API functions
  */
 
-/*
- * The "get_*restore_pointer" functions are used to provide a
- * physical restore address where the ROM code jumps while waking
- * up from MPU OFF/OSWR state.
- * The restore pointer is stored into the scratchpad.
- */
-
-	.text
-/* Function call to get the restore pointer for resume from OFF */
-ENTRY(get_restore_pointer)
-	stmfd	sp!, {lr}	@ save registers on stack
-	adr	r0, restore
-	ldmfd	sp!, {pc}	@ restore regs and return
-ENDPROC(get_restore_pointer)
-	.align
-ENTRY(get_restore_pointer_sz)
-	.word	. - get_restore_pointer
-
-	.text
-/* Function call to get the restore pointer for 3630 resume from OFF */
-ENTRY(get_omap3630_restore_pointer)
-	stmfd	sp!, {lr}	@ save registers on stack
-	adr	r0, restore_3630
-	ldmfd	sp!, {pc}	@ restore regs and return
-ENDPROC(get_omap3630_restore_pointer)
-	.align
-ENTRY(get_omap3630_restore_pointer_sz)
-	.word	. - get_omap3630_restore_pointer
-
-	.text
-/* Function call to get the restore pointer for ES3 to resume from OFF */
-ENTRY(get_es3_restore_pointer)
-	stmfd	sp!, {lr}	@ save registers on stack
-	adr	r0, restore_es3
-	ldmfd	sp!, {pc}	@ restore regs and return
-ENDPROC(get_es3_restore_pointer)
-	.align
-ENTRY(get_es3_restore_pointer_sz)
-	.word	. - get_es3_restore_pointer
-
 	.text
 /*
  * L2 cache needs to be toggled for stable OFF mode functionality on 3630.
@@ -133,7 +93,7 @@ ENDPROC(enable_omap3630_toggle_l2_on_restore)
 /* Function to call rom code to save secure ram context */
 	.align	3
 ENTRY(save_secure_ram_context)
-	stmfd	sp!, {r1-r12, lr}	@ save registers on stack
+	stmfd	sp!, {r4 - r11, lr}	@ save registers on stack
 	adr	r3, api_params		@ r3 points to parameters
 	str	r0, [r3,#0x4]		@ r0 has sdram address
 	ldr	r12, high_mask
@@ -152,7 +112,7 @@ ENTRY(save_secure_ram_context)
 	nop
 	nop
 	nop
-	ldmfd	sp!, {r1-r12, pc}
+	ldmfd	sp!, {r4 - r11, pc}
 	.align
 sram_phy_addr_mask:
 	.word	SRAM_BASE_P
@@ -179,69 +139,38 @@ ENTRY(save_secure_ram_context_sz)
  *
  *
  * Notes:
- * - this code gets copied to internal SRAM at boot and after wake-up
- *   from OFF mode. The execution pointer in SRAM is _omap_sram_idle.
+ * - only the minimum set of functions gets copied to internal SRAM at boot
+ *   and after wake-up from OFF mode, cf. omap_push_sram_idle. The function
+ *   pointers in SDRAM or SRAM are called depending on the desired low power
+ *   target state.
  * - when the OMAP wakes up it continues at different execution points
  *   depending on the low power mode (non-OFF vs OFF modes),
  *   cf. 'Resume path for xxx mode' comments.
  */
 	.align	3
 ENTRY(omap34xx_cpu_suspend)
-	stmfd	sp!, {r0-r12, lr}	@ save registers on stack
+	stmfd	sp!, {r4 - r11, lr}	@ save registers on stack
 
 	/*
-	 * r0 contains CPU context save/restore pointer in sdram
-	 * r1 contains information about saving context:
+	 * r0 contains information about saving context:
 	 *   0 - No context lost
 	 *   1 - Only L1 and logic lost
 	 *   2 - Only L2 lost (Even L1 is retained we clean it along with L2)
 	 *   3 - Both L1 and L2 lost and logic lost
 	 */
 
-	/* Directly jump to WFI is the context save is not required */
-	cmp	r1, #0x0
-	beq	omap3_do_wfi
+	/*
+	 * For OFF mode: save context and jump to WFI in SDRAM (omap3_do_wfi)
+	 * For non-OFF modes: jump to the WFI code in SRAM (omap3_do_wfi_sram)
+	 */
+	ldr	r4, omap3_do_wfi_sram_addr
+	ldr	r5, [r4]
+	cmp	r0, #0x0		@ If no context save required,
+	bxeq	r5			@  jump to the WFI code in SRAM
+
 
 	/* Otherwise fall through to the save context code */
 save_context_wfi:
-	mov	r8, r0			@ Store SDRAM address in r8
-	mrc	p15, 0, r5, c1, c0, 1	@ Read Auxiliary Control Register
-	mov	r4, #0x1		@ Number of parameters for restore call
-	stmia	r8!, {r4-r5}		@ Push parameters for restore call
-	mrc	p15, 1, r5, c9, c0, 2	@ Read L2 AUX ctrl register
-	stmia	r8!, {r4-r5}		@ Push parameters for restore call
-
-        /* Check what that target sleep state is from r1 */
-	cmp	r1, #0x2		@ Only L2 lost, no need to save context
-	beq	clean_caches
-
-l1_logic_lost:
-	mov	r4, sp			@ Store sp
-	mrs	r5, spsr		@ Store spsr
-	mov	r6, lr			@ Store lr
-	stmia	r8!, {r4-r6}
-
-	mrc	p15, 0, r4, c1, c0, 2	@ Coprocessor access control register
-	mrc	p15, 0, r5, c2, c0, 0	@ TTBR0
-	mrc	p15, 0, r6, c2, c0, 1	@ TTBR1
-	mrc	p15, 0, r7, c2, c0, 2	@ TTBCR
-	stmia	r8!, {r4-r7}
-
-	mrc	p15, 0, r4, c3, c0, 0	@ Domain access Control Register
-	mrc	p15, 0, r5, c10, c2, 0	@ PRRR
-	mrc	p15, 0, r6, c10, c2, 1	@ NMRR
-	stmia	r8!,{r4-r6}
-
-	mrc	p15, 0, r4, c13, c0, 1	@ Context ID
-	mrc	p15, 0, r5, c13, c0, 2	@ User r/w thread and process ID
-	mrc	p15, 0, r6, c12, c0, 0	@ Secure or NS vector base address
-	mrs	r7, cpsr		@ Store current cpsr
-	stmia	r8!, {r4-r7}
-
-	mrc	p15, 0, r4, c1, c0, 0	@ save control register
-	stmia	r8!, {r4}
-
-clean_caches:
 	/*
 	 * jump out to kernel flush routine
 	 *  - reuse that code is better
@@ -284,7 +213,32 @@ clean_caches:
  THUMB(	nop		)
 	.arm
 
-omap3_do_wfi:
+	b	omap3_do_wfi
+
+/*
+ * Local variables
+ */
+omap3_do_wfi_sram_addr:
+	.word omap3_do_wfi_sram
+kernel_flush:
+	.word v7_flush_dcache_all
+
+/* ===================================
+ * == WFI instruction => Enter idle ==
+ * ===================================
+ */
+
+/*
+ * Do WFI instruction
+ * Includes the resume path for non-OFF modes
+ *
+ * This code gets copied to internal SRAM and is accessible
+ * from both SDRAM and SRAM:
+ * - executed from SRAM for non-off modes (omap3_do_wfi_sram),
+ * - executed from SDRAM for OFF mode (omap3_do_wfi).
+ */
+	.align	3
+ENTRY(omap3_do_wfi)
 	ldr	r4, sdrc_power		@ read the SDRC_POWER register
 	ldr	r5, [r4]		@ read the contents of SDRC_POWER
 	orr	r5, r5, #0x40		@ enable self refresh on idle req
@@ -316,8 +270,86 @@ omap3_do_wfi:
 	nop
 	nop
 	nop
-	bl wait_sdrc_ok
 
+/*
+ * This function implements the erratum ID i581 WA:
+ *  SDRC state restore before accessing the SDRAM
+ *
+ * Only used at return from non-OFF mode. For OFF
+ * mode the ROM code configures the SDRC and
+ * the DPLL before calling the restore code directly
+ * from DDR.
+ */
+
+/* Make sure SDRC accesses are ok */
+wait_sdrc_ok:
+
+/* DPLL3 must be locked before accessing the SDRC. Maybe the HW ensures this */
+	ldr	r4, cm_idlest_ckgen
+wait_dpll3_lock:
+	ldr	r5, [r4]
+	tst	r5, #1
+	beq	wait_dpll3_lock
+
+	ldr	r4, cm_idlest1_core
+wait_sdrc_ready:
+	ldr	r5, [r4]
+	tst	r5, #0x2
+	bne	wait_sdrc_ready
+	/* allow DLL powerdown upon hw idle req */
+	ldr	r4, sdrc_power
+	ldr	r5, [r4]
+	bic	r5, r5, #0x40
+	str	r5, [r4]
+
+/*
+ * PC-relative stores lead to undefined behaviour in Thumb-2: use a r7 as a
+ * base instead.
+ * Be careful not to clobber r7 when maintaing this code.
+ */
+
+is_dll_in_lock_mode:
+	/* Is dll in lock mode? */
+	ldr	r4, sdrc_dlla_ctrl
+	ldr	r5, [r4]
+	tst	r5, #0x4
+	bne	exit_nonoff_modes	@ Return if locked
+	/* wait till dll locks */
+	adr	r7, kick_counter
+wait_dll_lock_timed:
+	ldr	r4, wait_dll_lock_counter
+	add	r4, r4, #1
+	str	r4, [r7, #wait_dll_lock_counter - kick_counter]
+	ldr	r4, sdrc_dlla_status
+	/* Wait 20uS for lock */
+	mov	r6, #8
+wait_dll_lock:
+	subs	r6, r6, #0x1
+	beq	kick_dll
+	ldr	r5, [r4]
+	and	r5, r5, #0x4
+	cmp	r5, #0x4
+	bne	wait_dll_lock
+	b	exit_nonoff_modes	@ Return when locked
+
+	/* disable/reenable DLL if not locked */
+kick_dll:
+	ldr	r4, sdrc_dlla_ctrl
+	ldr	r5, [r4]
+	mov	r6, r5
+	bic	r6, #(1<<3)		@ disable dll
+	str	r6, [r4]
+	dsb
+	orr	r6, r6, #(1<<3)		@ enable dll
+	str	r6, [r4]
+	dsb
+	ldr	r4, kick_counter
+	add	r4, r4, #1
+	str	r4, [r7]		@ kick_counter
+	b	wait_dll_lock_timed
+
+exit_nonoff_modes:
+	/* Re-enable C-bit if needed */
 	mrc	p15, 0, r0, c1, c0, 0
 	tst	r0, #(1 << 2)		@ Check C bit enabled?
 	orreq	r0, r0, #(1 << 2)	@ Enable the C bit if cleared
@@ -329,7 +361,32 @@ omap3_do_wfi:
  * == Exit point from non-OFF modes ==
  * ===================================
  */
-	ldmfd	sp!, {r0-r12, pc}	@ restore regs and return
+	ldmfd	sp!, {r4 - r11, pc}	@ restore regs and return
+
+/*
+ * Local variables
+ */
+sdrc_power:
+	.word	SDRC_POWER_V
+cm_idlest1_core:
+	.word	CM_IDLEST1_CORE_V
+cm_idlest_ckgen:
+	.word	CM_IDLEST_CKGEN_V
+sdrc_dlla_status:
+	.word	SDRC_DLLA_STATUS_V
+sdrc_dlla_ctrl:
+	.word	SDRC_DLLA_CTRL_V
+	/*
+	 * When exporting to userspace while the counters are in SRAM,
+	 * these 2 words need to be at the end to facilitate retrival!
+	 */
+kick_counter:
+	.word	0
+wait_dll_lock_counter:
+	.word	0
+
+ENTRY(omap3_do_wfi_sz)
+	.word	. - omap3_do_wfi
 
 
 /*
@@ -346,13 +403,17 @@ omap3_do_wfi:
  *  restore_es3: applies to 34xx >= ES3.0
  *  restore_3630: applies to 36xx
  *  restore: common code for 3xxx
+ *
+ * Note: when back from CORE and MPU OFF mode we are running
+ *  from SDRAM, without MMU, without the caches and prediction.
+ *  Also the SRAM content has been cleared.
  */
-restore_es3:
+ENTRY(omap3_restore_es3)
 	ldr	r5, pm_prepwstst_core_p
 	ldr	r4, [r5]
 	and	r4, r4, #0x3
 	cmp	r4, #0x0	@ Check if previous power state of CORE is OFF
-	bne	restore
+	bne	omap3_restore	@ Fall through to OMAP3 common code
 	adr	r0, es3_sdrc_fix
 	ldr	r1, sram_base
 	ldr	r2, es3_sdrc_fix_sz
@@ -364,35 +425,32 @@ copy_to_sram:
 	bne	copy_to_sram
 	ldr	r1, sram_base
 	blx	r1
-	b	restore
+	b	omap3_restore	@ Fall through to OMAP3 common code
+ENDPROC(omap3_restore_es3)
 
-restore_3630:
+ENTRY(omap3_restore_3630)
 	ldr	r1, pm_prepwstst_core_p
 	ldr	r2, [r1]
 	and	r2, r2, #0x3
 	cmp	r2, #0x0	@ Check if previous power state of CORE is OFF
-	bne	restore
+	bne	omap3_restore	@ Fall through to OMAP3 common code
 	/* Disable RTA before giving control */
 	ldr	r1, control_mem_rta
 	mov	r2, #OMAP36XX_RTA_DISABLE
 	str	r2, [r1]
+ENDPROC(omap3_restore_3630)
 
 	/* Fall through to common code for the remaining logic */
 
-restore:
+ENTRY(omap3_restore)
 	/*
-	 * Check what was the reason for mpu reset and store the reason in r9:
-	 *  0 - No context lost
-	 *  1 - Only L1 and logic lost
-	 *  2 - Only L2 lost - In this case, we wont be here
-	 *  3 - Both L1 and L2 lost
+	 * Read the pwstctrl register to check the reason for mpu reset.
+	 * This tells us what was lost.
 	 */
 	ldr	r1, pm_pwstctrl_mpu
 	ldr	r2, [r1]
 	and	r2, r2, #0x3
 	cmp	r2, #0x0	@ Check if target power state was OFF or RET
-	moveq	r9, #0x3	@ MPU OFF => L1 and L2 lost
-	movne	r9, #0x1	@ Only L1 and L2 lost => avoid L2 invalidation
 	bne	logic_l1_restore
 
 	ldr	r0, l2dis_3630
@@ -471,115 +529,39 @@ logic_l1_restore:
 	orr	r1, r1, #2		@ re-enable L2 cache
 	mcr	p15, 0, r1, c1, c0, 1
 skipl2reen:
-	mov	r1, #0
-	/*
-	 * Invalidate all instruction caches to PoU
-	 * and flush branch target cache
-	 */
-	mcr	p15, 0, r1, c7, c5, 0
 
-	ldr	r4, scratchpad_base
-	ldr	r3, [r4,#0xBC]
-	adds	r3, r3, #16
-
-	ldmia	r3!, {r4-r6}
-	mov	sp, r4			@ Restore sp
-	msr	spsr_cxsf, r5		@ Restore spsr
-	mov	lr, r6			@ Restore lr
-
-	ldmia	r3!, {r4-r7}
-	mcr	p15, 0, r4, c1, c0, 2	@ Coprocessor access Control Register
-	mcr	p15, 0, r5, c2, c0, 0	@ TTBR0
-	mcr	p15, 0, r6, c2, c0, 1	@ TTBR1
-	mcr	p15, 0, r7, c2, c0, 2	@ TTBCR
-
-	ldmia	r3!,{r4-r6}
-	mcr	p15, 0, r4, c3, c0, 0	@ Domain access Control Register
-	mcr	p15, 0, r5, c10, c2, 0	@ PRRR
-	mcr	p15, 0, r6, c10, c2, 1	@ NMRR
-
-
-	ldmia	r3!,{r4-r7}
-	mcr	p15, 0, r4, c13, c0, 1	@ Context ID
-	mcr	p15, 0, r5, c13, c0, 2	@ User r/w thread and process ID
-	mrc	p15, 0, r6, c12, c0, 0	@ Secure or NS vector base address
-	msr	cpsr, r7		@ store cpsr
-
-	/* Enabling MMU here */
-	mrc	p15, 0, r7, c2, c0, 2 	@ Read TTBRControl
-	/* Extract N (0:2) bits and decide whether to use TTBR0 or TTBR1 */
-	and	r7, #0x7
-	cmp	r7, #0x0
-	beq	usettbr0
-ttbr_error:
-	/*
-	 * More work needs to be done to support N[0:2] value other than 0
-	 * So looping here so that the error can be detected
-	 */
-	b	ttbr_error
-usettbr0:
-	mrc	p15, 0, r2, c2, c0, 0
-	ldr	r5, ttbrbit_mask
-	and	r2, r5
-	mov	r4, pc
-	ldr	r5, table_index_mask
-	and	r4, r5			@ r4 = 31 to 20 bits of pc
-	/* Extract the value to be written to table entry */
-	ldr	r1, table_entry
-	/* r1 has the value to be written to table entry*/
-	add	r1, r1, r4
-	/* Getting the address of table entry to modify */
-	lsr	r4, #18
-	/* r2 has the location which needs to be modified */
-	add	r2, r4
-	/* Storing previous entry of location being modified */
-	ldr	r5, scratchpad_base
-	ldr	r4, [r2]
-	str	r4, [r5, #0xC0]
-	/* Modify the table entry */
-	str	r1, [r2]
-	/*
-	 * Storing address of entry being modified
-	 * - will be restored after enabling MMU
-	 */
-	ldr	r5, scratchpad_base
-	str	r2, [r5, #0xC4]
-
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c5, 4	@ Flush prefetch buffer
-	mcr	p15, 0, r0, c7, c5, 6	@ Invalidate branch predictor array
-	mcr	p15, 0, r0, c8, c5, 0	@ Invalidate instruction TLB
-	mcr	p15, 0, r0, c8, c6, 0	@ Invalidate data TLB
-	/*
-	 * Restore control register. This enables the MMU.
-	 * The caches and prediction are not enabled here, they
-	 * will be enabled after restoring the MMU table entry.
-	 */
-	ldmia	r3!, {r4}
-	/* Store previous value of control register in scratchpad */
-	str	r4, [r5, #0xC8]
-	ldr	r2, cache_pred_disable_mask
-	and	r4, r2
-	mcr	p15, 0, r4, c1, c0, 0
-	dsb
-	isb
-	ldr     r0, =restoremmu_on
-	bx      r0
+	/* Now branch to the common CPU resume function */
+	b	cpu_resume
+ENDPROC(omap3_restore)
+
+	.ltorg
 
 /*
- * ==============================
- * == Exit point from OFF mode ==
- * ==============================
+ * Local variables
  */
-restoremmu_on:
-	ldmfd	sp!, {r0-r12, pc}	@ restore regs and return
-
+pm_prepwstst_core_p:
+	.word	PM_PREPWSTST_CORE_P
+pm_pwstctrl_mpu:
+	.word	PM_PWSTCTRL_MPU_P
+scratchpad_base:
+	.word	SCRATCHPAD_BASE_P
+sram_base:
+	.word	SRAM_BASE_P + 0x8000
+control_stat:
+	.word	CONTROL_STAT
+control_mem_rta:
+	.word	CONTROL_MEM_RTA_CTRL
+l2dis_3630:
+	.word	0
 
 /*
  * Internal functions
  */
 
-/* This function implements the erratum ID i443 WA, applies to 34xx >= ES3.0 */
+/*
+ * This function implements the erratum ID i443 WA, applies to 34xx >= ES3.0
+ * Copied to and run from SRAM in order to reconfigure the SDRC parameters.
+ */
 	.text
 	.align	3
 ENTRY(es3_sdrc_fix)
@@ -609,6 +591,9 @@ ENTRY(es3_sdrc_fix)
 	str	r5, [r4]		@ kick off refreshes
 	bx	lr
 
+/*
+ * Local variables
+ */
 	.align
 sdrc_syscfg:
 	.word	SDRC_SYSCONFIG_P
@@ -627,128 +612,3 @@ sdrc_manual_1:
 ENDPROC(es3_sdrc_fix)
 ENTRY(es3_sdrc_fix_sz)
 	.word	. - es3_sdrc_fix
-
-/*
- * This function implements the erratum ID i581 WA:
- *  SDRC state restore before accessing the SDRAM
- *
- * Only used at return from non-OFF mode. For OFF
- * mode the ROM code configures the SDRC and
- * the DPLL before calling the restore code directly
- * from DDR.
- */
-
-/* Make sure SDRC accesses are ok */
-wait_sdrc_ok:
-
-/* DPLL3 must be locked before accessing the SDRC. Maybe the HW ensures this */
-	ldr	r4, cm_idlest_ckgen
-wait_dpll3_lock:
-	ldr	r5, [r4]
-	tst	r5, #1
-	beq	wait_dpll3_lock
-
-	ldr	r4, cm_idlest1_core
-wait_sdrc_ready:
-	ldr	r5, [r4]
-	tst	r5, #0x2
-	bne	wait_sdrc_ready
-	/* allow DLL powerdown upon hw idle req */
-	ldr	r4, sdrc_power
-	ldr	r5, [r4]
-	bic	r5, r5, #0x40
-	str	r5, [r4]
-
-/*
- * PC-relative stores lead to undefined behaviour in Thumb-2: use a r7 as a
- * base instead.
- * Be careful not to clobber r7 when maintaing this code.
- */
-
-is_dll_in_lock_mode:
-	/* Is dll in lock mode? */
-	ldr	r4, sdrc_dlla_ctrl
-	ldr	r5, [r4]
-	tst	r5, #0x4
-	bxne	lr			@ Return if locked
-	/* wait till dll locks */
-	adr	r7, kick_counter
-wait_dll_lock_timed:
-	ldr	r4, wait_dll_lock_counter
-	add	r4, r4, #1
-	str	r4, [r7, #wait_dll_lock_counter - kick_counter]
-	ldr	r4, sdrc_dlla_status
-	/* Wait 20uS for lock */
-	mov	r6, #8
-wait_dll_lock:
-	subs	r6, r6, #0x1
-	beq	kick_dll
-	ldr	r5, [r4]
-	and	r5, r5, #0x4
-	cmp	r5, #0x4
-	bne	wait_dll_lock
-	bx	lr			@ Return when locked
-
-	/* disable/reenable DLL if not locked */
-kick_dll:
-	ldr	r4, sdrc_dlla_ctrl
-	ldr	r5, [r4]
-	mov	r6, r5
-	bic	r6, #(1<<3)		@ disable dll
-	str	r6, [r4]
-	dsb
-	orr	r6, r6, #(1<<3)		@ enable dll
-	str	r6, [r4]
-	dsb
-	ldr	r4, kick_counter
-	add	r4, r4, #1
-	str	r4, [r7]		@ kick_counter
-	b	wait_dll_lock_timed
-
-	.align
-cm_idlest1_core:
-	.word	CM_IDLEST1_CORE_V
-cm_idlest_ckgen:
-	.word	CM_IDLEST_CKGEN_V
-sdrc_dlla_status:
-	.word	SDRC_DLLA_STATUS_V
-sdrc_dlla_ctrl:
-	.word	SDRC_DLLA_CTRL_V
-pm_prepwstst_core_p:
-	.word	PM_PREPWSTST_CORE_P
-pm_pwstctrl_mpu:
-	.word	PM_PWSTCTRL_MPU_P
-scratchpad_base:
-	.word	SCRATCHPAD_BASE_P
-sram_base:
-	.word	SRAM_BASE_P + 0x8000
-sdrc_power:
-	.word	SDRC_POWER_V
-ttbrbit_mask:
-	.word	0xFFFFC000
-table_index_mask:
-	.word	0xFFF00000
-table_entry:
-	.word	0x00000C02
-cache_pred_disable_mask:
-	.word	0xFFFFE7FB
-control_stat:
-	.word	CONTROL_STAT
-control_mem_rta:
-	.word	CONTROL_MEM_RTA_CTRL
-kernel_flush:
-	.word	v7_flush_dcache_all
-l2dis_3630:
-	.word	0
-	/*
-	 * When exporting to userspace while the counters are in SRAM,
-	 * these 2 words need to be at the end to facilitate retrival!
-	 */
-kick_counter:
-	.word	0
-wait_dll_lock_counter:
-	.word	0
-ENDPROC(omap34xx_cpu_suspend)
-
-ENTRY(omap34xx_cpu_suspend_sz)
-	.word	. - omap34xx_cpu_suspend
diff --git a/arch/arm/mach-pnx4008/include/mach/entry-macro.S b/arch/arm/mach-pnx4008/include/mach/entry-macro.S
index 8003037578e..db7eeebf30d 100644
--- a/arch/arm/mach-pnx4008/include/mach/entry-macro.S
+++ b/arch/arm/mach-pnx4008/include/mach/entry-macro.S
@@ -120,8 +120,3 @@
 1003:
 		.endm
 
-
-		.macro	irq_prio_table
-		.endm
-
-
diff --git a/arch/arm/mach-pxa/include/mach/pm.h b/arch/arm/mach-pxa/include/mach/pm.h
index f15afe01299..51558bcee99 100644
--- a/arch/arm/mach-pxa/include/mach/pm.h
+++ b/arch/arm/mach-pxa/include/mach/pm.h
@@ -22,8 +22,8 @@ struct pxa_cpu_pm_fns {
 extern struct pxa_cpu_pm_fns *pxa_cpu_pm_fns;
 
 /* sleep.S */
-extern void pxa25x_cpu_suspend(unsigned int, long);
-extern void pxa27x_cpu_suspend(unsigned int, long);
+extern int pxa25x_finish_suspend(unsigned long);
+extern int pxa27x_finish_suspend(unsigned long);
 
 extern int pxa_pm_enter(suspend_state_t state);
 extern int pxa_pm_prepare(void);
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index 65f24f0b77e..5a5329bc33f 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -33,6 +33,7 @@
 #include <linux/i2c-gpio.h>
 
 #include <asm/mach-types.h>
+#include <asm/suspend.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c
index 51e1583265b..37178a8559b 100644
--- a/arch/arm/mach-pxa/pm.c
+++ b/arch/arm/mach-pxa/pm.c
@@ -42,7 +42,6 @@ int pxa_pm_enter(suspend_state_t state)
 
 	/* *** go zzz *** */
 	pxa_cpu_pm_fns->enter(state);
-	cpu_init();
 
 	if (state != PM_SUSPEND_STANDBY && pxa_cpu_pm_fns->restore) {
 		/* after sleeping, validate the checksum */
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index fed363cec9c..9c434d21a27 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -25,6 +25,7 @@
 #include <linux/irq.h>
 
 #include <asm/mach/map.h>
+#include <asm/suspend.h>
 #include <mach/hardware.h>
 #include <mach/irqs.h>
 #include <mach/gpio.h>
@@ -244,7 +245,7 @@ static void pxa25x_cpu_pm_enter(suspend_state_t state)
 
 	switch (state) {
 	case PM_SUSPEND_MEM:
-		pxa25x_cpu_suspend(PWRMODE_SLEEP, PLAT_PHYS_OFFSET - PAGE_OFFSET);
+		cpu_suspend(PWRMODE_SLEEP, pxa25x_finish_suspend);
 		break;
 	}
 }
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 2fecbec58d8..9d2400b5f50 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -24,6 +24,7 @@
 #include <asm/mach/map.h>
 #include <mach/hardware.h>
 #include <asm/irq.h>
+#include <asm/suspend.h>
 #include <mach/irqs.h>
 #include <mach/gpio.h>
 #include <mach/pxa27x.h>
@@ -284,6 +285,11 @@ void pxa27x_cpu_pm_restore(unsigned long *sleep_save)
 void pxa27x_cpu_pm_enter(suspend_state_t state)
 {
 	extern void pxa_cpu_standby(void);
+#ifndef CONFIG_IWMMXT
+	u64 acc0;
+
+	asm volatile("mra %Q0, %R0, acc0" : "=r" (acc0));
+#endif
 
 	/* ensure voltage-change sequencer not initiated, which hangs */
 	PCFR &= ~PCFR_FVC;
@@ -299,7 +305,10 @@ void pxa27x_cpu_pm_enter(suspend_state_t state)
 		pxa_cpu_standby();
 		break;
 	case PM_SUSPEND_MEM:
-		pxa27x_cpu_suspend(pwrmode, PLAT_PHYS_OFFSET - PAGE_OFFSET);
+		cpu_suspend(pwrmode, pxa27x_finish_suspend);
+#ifndef CONFIG_IWMMXT
+		asm volatile("mar acc0, %Q0, %R0" : "=r" (acc0));
+#endif
 		break;
 	}
 }
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index 8521d7d6f1d..ef1c56a67af 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -24,6 +24,7 @@
 #include <linux/i2c/pxa-i2c.h>
 
 #include <asm/mach/map.h>
+#include <asm/suspend.h>
 #include <mach/hardware.h>
 #include <mach/gpio.h>
 #include <mach/pxa3xx-regs.h>
@@ -141,8 +142,13 @@ static void pxa3xx_cpu_pm_suspend(void)
 {
 	volatile unsigned long *p = (volatile void *)0xc0000000;
 	unsigned long saved_data = *p;
+#ifndef CONFIG_IWMMXT
+	u64 acc0;
 
-	extern void pxa3xx_cpu_suspend(long);
+	asm volatile("mra %Q0, %R0, acc0" : "=r" (acc0));
+#endif
+
+	extern int pxa3xx_finish_suspend(unsigned long);
 
 	/* resuming from D2 requires the HSIO2/BOOT/TPM clocks enabled */
 	CKENA |= (1 << CKEN_BOOT) | (1 << CKEN_TPM);
@@ -162,11 +168,15 @@ static void pxa3xx_cpu_pm_suspend(void)
 	/* overwrite with the resume address */
 	*p = virt_to_phys(cpu_resume);
 
-	pxa3xx_cpu_suspend(PLAT_PHYS_OFFSET - PAGE_OFFSET);
+	cpu_suspend(0, pxa3xx_finish_suspend);
 
 	*p = saved_data;
 
 	AD3ER = 0;
+
+#ifndef CONFIG_IWMMXT
+	asm volatile("mar acc0, %Q0, %R0" : "=r" (acc0));
+#endif
 }
 
 static void pxa3xx_cpu_pm_enter(suspend_state_t state)
diff --git a/arch/arm/mach-pxa/sleep.S b/arch/arm/mach-pxa/sleep.S
index 6f5368899d8..1e544be9905 100644
--- a/arch/arm/mach-pxa/sleep.S
+++ b/arch/arm/mach-pxa/sleep.S
@@ -24,20 +24,9 @@
 
 #ifdef CONFIG_PXA3xx
 /*
- * pxa3xx_cpu_suspend() - forces CPU into sleep state (S2D3C4)
- *
- * r0 = v:p offset
+ * pxa3xx_finish_suspend() - forces CPU into sleep state (S2D3C4)
  */
-ENTRY(pxa3xx_cpu_suspend)
-
-#ifndef CONFIG_IWMMXT
-	mra	r2, r3, acc0
-#endif
-	stmfd	sp!, {r2 - r12, lr}	@ save registers on stack
-	mov	r1, r0
-	ldr	r3, =pxa_cpu_resume	@ resume function
-	bl	cpu_suspend
-
+ENTRY(pxa3xx_finish_suspend)
 	mov	r0, #0x06		@ S2D3C4 mode
 	mcr	p14, 0, r0, c7, c0, 0	@ enter sleep
 
@@ -46,28 +35,18 @@ ENTRY(pxa3xx_cpu_suspend)
 
 #ifdef CONFIG_PXA27x
 /*
- * pxa27x_cpu_suspend()
+ * pxa27x_finish_suspend()
  *
  * Forces CPU into sleep state.
  *
  * r0 = value for PWRMODE M field for desired sleep state
- * r1 = v:p offset
  */
-ENTRY(pxa27x_cpu_suspend)
-
-#ifndef CONFIG_IWMMXT
-	mra	r2, r3, acc0
-#endif
-	stmfd	sp!, {r2 - r12, lr}		@ save registers on stack
-	mov	r4, r0				@ save sleep mode
-	ldr	r3, =pxa_cpu_resume		@ resume function
-	bl	cpu_suspend
-
+ENTRY(pxa27x_finish_suspend)
 	@ Put the processor to sleep
 	@ (also workaround for sighting 28071)
 
 	@ prepare value for sleep mode
-	mov	r1, r4				@ sleep mode
+	mov	r1, r0				@ sleep mode
 
 	@ prepare pointer to physical address 0 (virtual mapping in generic.c)
 	mov	r2, #UNCACHED_PHYS_0
@@ -99,21 +78,16 @@ ENTRY(pxa27x_cpu_suspend)
 
 #ifdef CONFIG_PXA25x
 /*
- * pxa25x_cpu_suspend()
+ * pxa25x_finish_suspend()
  *
  * Forces CPU into sleep state.
  *
  * r0 = value for PWRMODE M field for desired sleep state
- * r1 = v:p offset
  */
 
-ENTRY(pxa25x_cpu_suspend)
-	stmfd	sp!, {r2 - r12, lr}		@ save registers on stack
-	mov	r4, r0				@ save sleep mode
-	ldr	r3, =pxa_cpu_resume		@ resume function
-	bl	cpu_suspend
+ENTRY(pxa25x_finish_suspend)
 	@ prepare value for sleep mode
-	mov	r1, r4				@ sleep mode
+	mov	r1, r0				@ sleep mode
 
 	@ prepare pointer to physical address 0 (virtual mapping in generic.c)
 	mov	r2, #UNCACHED_PHYS_0
@@ -195,16 +169,3 @@ pxa_cpu_do_suspend:
 	mcr	p14, 0, r1, c7, c0, 0		@ PWRMODE
 
 20:	b	20b				@ loop waiting for sleep
-
-/*
- * pxa_cpu_resume()
- *
- * entry point from bootloader into kernel during resume
- */
-	.align 5
-pxa_cpu_resume:
-	ldmfd	sp!, {r2, r3}
-#ifndef CONFIG_IWMMXT
-	mar	acc0, r2, r3
-#endif
-	ldmfd	sp!, {r4 - r12, pc}		@ return to caller
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index 00363c7ac18..9b99cc164de 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -31,6 +31,7 @@
 #include <linux/can/platform/mcp251x.h>
 
 #include <asm/mach-types.h>
+#include <asm/suspend.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
@@ -676,7 +677,7 @@ static struct pxa2xx_udc_mach_info zeus_udc_info = {
 static void zeus_power_off(void)
 {
 	local_irq_disable();
-	pxa27x_cpu_suspend(PWRMODE_DEEPSLEEP, PLAT_PHYS_OFFSET - PAGE_OFFSET);
+	cpu_suspend(PWRMODE_DEEPSLEEP, pxa27x_finish_suspend);
 }
 #else
 #define zeus_power_off   NULL
diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
index b9a9805e482..dba6d0c1fc1 100644
--- a/arch/arm/mach-realview/Kconfig
+++ b/arch/arm/mach-realview/Kconfig
@@ -50,6 +50,7 @@ config MACH_REALVIEW_PB1176
 	bool "Support RealView(R) Platform Baseboard for ARM1176JZF-S"
 	select CPU_V6
 	select ARM_GIC
+	select HAVE_TCM
 	help
 	  Include support for the ARM(R) RealView(R) Platform Baseboard for
 	  ARM1176JZF-S.
diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
index 963bf0d8119..4ae943bafa9 100644
--- a/arch/arm/mach-realview/platsmp.c
+++ b/arch/arm/mach-realview/platsmp.c
@@ -68,14 +68,6 @@ void __init smp_init_cpus(void)
 
 void __init platform_smp_prepare_cpus(unsigned int max_cpus)
 {
-	int i;
-
-	/*
-	 * Initialise the present map, which describes the set of CPUs
-	 * actually populated at the present time.
-	 */
-	for (i = 0; i < max_cpus; i++)
-		set_cpu_present(i, true);
 
 	scu_enable(scu_base_addr());
 
diff --git a/arch/arm/mach-s3c2412/pm.c b/arch/arm/mach-s3c2412/pm.c
index 752b13a7b3d..f4077efa51f 100644
--- a/arch/arm/mach-s3c2412/pm.c
+++ b/arch/arm/mach-s3c2412/pm.c
@@ -37,12 +37,10 @@
 
 extern void s3c2412_sleep_enter(void);
 
-static void s3c2412_cpu_suspend(void)
+static int s3c2412_cpu_suspend(unsigned long arg)
 {
 	unsigned long tmp;
 
-	flush_cache_all();
-
 	/* set our standby method to sleep */
 
 	tmp = __raw_readl(S3C2412_PWRCFG);
@@ -50,6 +48,8 @@ static void s3c2412_cpu_suspend(void)
 	__raw_writel(tmp, S3C2412_PWRCFG);
 
 	s3c2412_sleep_enter();
+
+	panic("sleep resumed to originator?");
 }
 
 static void s3c2412_pm_prepare(void)
diff --git a/arch/arm/mach-s3c2416/pm.c b/arch/arm/mach-s3c2416/pm.c
index 41db2b21e21..9ec54f1d8e7 100644
--- a/arch/arm/mach-s3c2416/pm.c
+++ b/arch/arm/mach-s3c2416/pm.c
@@ -24,10 +24,8 @@
 
 extern void s3c2412_sleep_enter(void);
 
-static void s3c2416_cpu_suspend(void)
+static int s3c2416_cpu_suspend(unsigned long arg)
 {
-	flush_cache_all();
-
 	/* enable wakeup sources regardless of battery state */
 	__raw_writel(S3C2443_PWRCFG_SLEEP, S3C2443_PWRCFG);
 
@@ -35,6 +33,8 @@ static void s3c2416_cpu_suspend(void)
 	__raw_writel(0x2BED, S3C2443_PWRMODE);
 
 	s3c2412_sleep_enter();
+
+	panic("sleep resumed to originator?");
 }
 
 static void s3c2416_pm_prepare(void)
diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c
index bc1c470b7de..8bad6437068 100644
--- a/arch/arm/mach-s3c64xx/pm.c
+++ b/arch/arm/mach-s3c64xx/pm.c
@@ -112,7 +112,7 @@ void s3c_pm_save_core(void)
  * this.
  */
 
-static void s3c64xx_cpu_suspend(void)
+static int s3c64xx_cpu_suspend(unsigned long arg)
 {
 	unsigned long tmp;
 
diff --git a/arch/arm/mach-s3c64xx/sleep.S b/arch/arm/mach-s3c64xx/sleep.S
index 1f87732b232..34313f9c879 100644
--- a/arch/arm/mach-s3c64xx/sleep.S
+++ b/arch/arm/mach-s3c64xx/sleep.S
@@ -25,29 +25,6 @@
 
 	.text
 
-	/* s3c_cpu_save
-	 *
-	 * Save enough processor state to allow the restart of the pm.c
-	 * code after resume.
-	 *
-	 * entry:
-	 *	r1 = v:p offset
-	*/
-
-ENTRY(s3c_cpu_save)
-	stmfd	sp!, { r4 - r12, lr }
-	ldr	r3, =resume_with_mmu
-	bl	cpu_suspend
-
-	@@ call final suspend code
-	ldr	r0, =pm_cpu_sleep
-	ldr	pc, [r0]
-	
-	@@ return to the caller, after the MMU is turned on.
-	@@ restore the last bits of the stack and return.
-resume_with_mmu:
-	ldmfd	sp!, { r4 - r12, pc }	@ return, from sp from s3c_cpu_save
-
 	/* Sleep magic, the word before the resume entry point so that the
 	 * bootloader can check for a resumeable image. */
 
diff --git a/arch/arm/mach-s5pv210/pm.c b/arch/arm/mach-s5pv210/pm.c
index 24febae3d4c..309e388a8a8 100644
--- a/arch/arm/mach-s5pv210/pm.c
+++ b/arch/arm/mach-s5pv210/pm.c
@@ -88,7 +88,7 @@ static struct sleep_save s5pv210_core_save[] = {
 	SAVE_ITEM(S3C2410_TCNTO(0)),
 };
 
-void s5pv210_cpu_suspend(void)
+void s5pv210_cpu_suspend(unsigned long arg)
 {
 	unsigned long tmp;
 
diff --git a/arch/arm/mach-s5pv210/sleep.S b/arch/arm/mach-s5pv210/sleep.S
index a3d649466fb..e3452ccd4b0 100644
--- a/arch/arm/mach-s5pv210/sleep.S
+++ b/arch/arm/mach-s5pv210/sleep.S
@@ -32,27 +32,6 @@
 
 	.text
 
-	/* s3c_cpu_save
-	 *
-	 * entry:
-	 *	r1 = v:p offset
-	*/
-
-ENTRY(s3c_cpu_save)
-
-	stmfd	sp!, { r3 - r12, lr }
-	ldr	r3, =resume_with_mmu
-	bl	cpu_suspend
-
-	ldr	r0, =pm_cpu_sleep
-	ldr	r0, [ r0 ]
-	mov	pc, r0
-
-resume_with_mmu:
-	ldmfd	sp!, { r3 - r12, pc }
-
-	.ltorg
-
 	/* sleep magic, to allow the bootloader to check for an valid
 	 * image to resume to. Must be the first word before the
 	 * s3c_cpu_resume entry.
diff --git a/arch/arm/mach-sa1100/pm.c b/arch/arm/mach-sa1100/pm.c
index c4661aab22f..bf85b8b259d 100644
--- a/arch/arm/mach-sa1100/pm.c
+++ b/arch/arm/mach-sa1100/pm.c
@@ -29,10 +29,11 @@
 
 #include <mach/hardware.h>
 #include <asm/memory.h>
+#include <asm/suspend.h>
 #include <asm/system.h>
 #include <asm/mach/time.h>
 
-extern void sa1100_cpu_suspend(long);
+extern int sa1100_finish_suspend(unsigned long);
 
 #define SAVE(x)		sleep_save[SLEEP_SAVE_##x] = x
 #define RESTORE(x)	x = sleep_save[SLEEP_SAVE_##x]
@@ -75,9 +76,7 @@ static int sa11x0_pm_enter(suspend_state_t state)
 	PSPR = virt_to_phys(cpu_resume);
 
 	/* go zzz */
-	sa1100_cpu_suspend(PLAT_PHYS_OFFSET - PAGE_OFFSET);
-
-	cpu_init();
+	cpu_suspend(0, sa1100_finish_suspend);
 
 	/*
 	 * Ensure not to come back here if it wasn't intended
diff --git a/arch/arm/mach-sa1100/sleep.S b/arch/arm/mach-sa1100/sleep.S
index 04f2a618d4e..e8223315b44 100644
--- a/arch/arm/mach-sa1100/sleep.S
+++ b/arch/arm/mach-sa1100/sleep.S
@@ -22,18 +22,13 @@
 
 		.text
 /*
- * sa1100_cpu_suspend()
+ * sa1100_finish_suspend()
  *
  * Causes sa11x0 to enter sleep state
  *
  */
 
-ENTRY(sa1100_cpu_suspend)
-	stmfd	sp!, {r4 - r12, lr}		@ save registers on stack
-	mov	r1, r0
-	ldr	r3, =sa1100_cpu_resume		@ return function
-	bl	cpu_suspend
-
+ENTRY(sa1100_finish_suspend)
 	@ disable clock switching
 	mcr	p15, 0, r1, c15, c2, 2
 
@@ -139,13 +134,3 @@ sa1110_sdram_controller_fix:
 	str	r13, [r12]
 
 20:	b	20b			@ loop waiting for sleep
-
-/*
- * cpu_sa1100_resume()
- *
- * entry point from bootloader into kernel during resume
- */
-	.align 5
-sa1100_cpu_resume:
-	mcr	p15, 0, r1, c15, c1, 2		@ enable clock switching
-	ldmfd	sp!, {r4 - r12, pc}		@ return to caller
diff --git a/arch/arm/mach-shark/include/mach/entry-macro.S b/arch/arm/mach-shark/include/mach/entry-macro.S
index e2853c0a333..0bb6cc626eb 100644
--- a/arch/arm/mach-shark/include/mach/entry-macro.S
+++ b/arch/arm/mach-shark/include/mach/entry-macro.S
@@ -11,17 +11,17 @@
 		.endm
 
 		.macro  get_irqnr_preamble, base, tmp
+		mov	\base, #0xe0000000
 		.endm
 
 		.macro  arch_ret_to_user, tmp1, tmp2
 		.endm
 
 		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		mov	r4, #0xe0000000
 
 		mov	\irqstat, #0x0C
-		strb	\irqstat, [r4, #0x20]		@outb(0x0C, 0x20) /* Poll command */
-		ldrb	\irqnr, [r4, #0x20]		@irq = inb(0x20) & 7
+		strb	\irqstat, [\base, #0x20]	@outb(0x0C, 0x20) /* Poll command */
+		ldrb	\irqnr, [\base, #0x20]		@irq = inb(0x20) & 7
 		and	\irqstat, \irqnr, #0x80
 		teq	\irqstat, #0
 		beq	43f
@@ -29,8 +29,8 @@
 		teq	\irqnr, #2
 		bne	44f
 43:		mov	\irqstat, #0x0C
-		strb	\irqstat, [r4, #0xa0]		@outb(0x0C, 0xA0) /* Poll command */
-		ldrb	\irqnr, [r4, #0xa0]		@irq = (inb(0xA0) & 7) + 8
+		strb	\irqstat, [\base, #0xa0]	@outb(0x0C, 0xA0) /* Poll command */
+		ldrb	\irqnr, [\base, #0xa0]		@irq = (inb(0xA0) & 7) + 8
 		and	\irqstat, \irqnr, #0x80
 		teq	\irqstat, #0
 		beq	44f
diff --git a/arch/arm/mach-shmobile/include/mach/sdhi-sh7372.h b/arch/arm/mach-shmobile/include/mach/sdhi-sh7372.h
new file mode 100644
index 00000000000..4a81b01f1e8
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/sdhi-sh7372.h
@@ -0,0 +1,21 @@
+#ifndef SDHI_SH7372_H
+#define SDHI_SH7372_H
+
+#define SDGENCNTA       0xfe40009c
+
+/* The countdown of SDGENCNTA is controlled by
+ * ZB3D2CLK which runs at 149.5MHz.
+ * That is 149.5ticks/us. Approximate this as 150ticks/us.
+ */
+static void udelay(int us)
+{
+	__raw_writel(us * 150, SDGENCNTA);
+	while(__raw_readl(SDGENCNTA)) ;
+}
+
+static void msleep(int ms)
+{
+	udelay(ms * 1000);
+}
+
+#endif
diff --git a/arch/arm/mach-shmobile/include/mach/sdhi.h b/arch/arm/mach-shmobile/include/mach/sdhi.h
new file mode 100644
index 00000000000..0ec9e69f2c3
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/sdhi.h
@@ -0,0 +1,16 @@
+#ifndef SDHI_H
+#define SDHI_H
+
+/**************************************************
+ *
+ *		CPU specific settings
+ *
+ **************************************************/
+
+#ifdef CONFIG_ARCH_SH7372
+#include "mach/sdhi-sh7372.h"
+#else
+#error "unsupported CPU."
+#endif
+
+#endif /* SDHI_H */
diff --git a/arch/arm/mach-shmobile/platsmp.c b/arch/arm/mach-shmobile/platsmp.c
index f3888feb1c6..66f980625a3 100644
--- a/arch/arm/mach-shmobile/platsmp.c
+++ b/arch/arm/mach-shmobile/platsmp.c
@@ -64,10 +64,5 @@ void __init smp_init_cpus(void)
 
 void __init platform_smp_prepare_cpus(unsigned int max_cpus)
 {
-	int i;
-
-	for (i = 0; i < max_cpus; i++)
-		set_cpu_present(i, true);
-
 	shmobile_smp_prepare_cpus();
 }
diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c
index b8ae3c978de..1a594dce8fb 100644
--- a/arch/arm/mach-tegra/platsmp.c
+++ b/arch/arm/mach-tegra/platsmp.c
@@ -129,14 +129,6 @@ void __init smp_init_cpus(void)
 
 void __init platform_smp_prepare_cpus(unsigned int max_cpus)
 {
-	int i;
-
-	/*
-	 * Initialise the present map, which describes the set of CPUs
-	 * actually populated at the present time.
-	 */
-	for (i = 0; i < max_cpus; i++)
-		set_cpu_present(i, true);
 
 	scu_enable(scu_base);
 }
diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c
index 0c527fe2ceb..a33df5f4c27 100644
--- a/arch/arm/mach-ux500/platsmp.c
+++ b/arch/arm/mach-ux500/platsmp.c
@@ -172,14 +172,6 @@ void __init smp_init_cpus(void)
 
 void __init platform_smp_prepare_cpus(unsigned int max_cpus)
 {
-	int i;
-
-	/*
-	 * Initialise the present map, which describes the set of CPUs
-	 * actually populated at the present time.
-	 */
-	for (i = 0; i < max_cpus; i++)
-		set_cpu_present(i, true);
 
 	scu_enable(scu_base_addr());
 	wakeup_secondary();
diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c
index 765a71ff7f3..bfd32f52c2d 100644
--- a/arch/arm/mach-vexpress/ct-ca9x4.c
+++ b/arch/arm/mach-vexpress/ct-ca9x4.c
@@ -229,10 +229,6 @@ static void ct_ca9x4_init_cpu_map(void)
 
 static void ct_ca9x4_smp_enable(unsigned int max_cpus)
 {
-	int i;
-	for (i = 0; i < max_cpus; i++)
-		set_cpu_present(i, true);
-
 	scu_enable(MMIO_P2V(A9_MPCORE_SCU));
 }
 #endif
diff --git a/arch/arm/mm/abort-ev4.S b/arch/arm/mm/abort-ev4.S
index 4f18f9e87ba..54473cd4aba 100644
--- a/arch/arm/mm/abort-ev4.S
+++ b/arch/arm/mm/abort-ev4.S
@@ -3,14 +3,11 @@
 /*
  * Function: v4_early_abort
  *
- * Params  : r2 = address of aborted instruction
- *         : r3 = saved SPSR
+ * Params  : r2 = pt_regs
+ *	   : r4 = aborted context pc
+ *	   : r5 = aborted context psr
  *
- * Returns : r0 = address of abort
- *	   : r1 = FSR, bit 11 = write
- *	   : r2-r8 = corrupted
- *	   : r9 = preserved
- *	   : sp = pointer to registers
+ * Returns : r4 - r11, r13 preserved
  *
  * Purpose : obtain information about current aborted instruction.
  * Note: we read user space.  This means we might cause a data
@@ -21,10 +18,8 @@
 ENTRY(v4_early_abort)
 	mrc	p15, 0, r1, c5, c0, 0		@ get FSR
 	mrc	p15, 0, r0, c6, c0, 0		@ get FAR
-	ldr	r3, [r2]			@ read aborted ARM instruction
+	ldr	r3, [r4]			@ read aborted ARM instruction
 	bic	r1, r1, #1 << 11 | 1 << 10	@ clear bits 11 and 10 of FSR
 	tst	r3, #1 << 20			@ L = 1 -> write?
 	orreq	r1, r1, #1 << 11		@ yes.
-	mov	pc, lr
-
-
+	b	do_DataAbort
diff --git a/arch/arm/mm/abort-ev4t.S b/arch/arm/mm/abort-ev4t.S
index b6282548f92..9da704e7b86 100644
--- a/arch/arm/mm/abort-ev4t.S
+++ b/arch/arm/mm/abort-ev4t.S
@@ -4,14 +4,11 @@
 /*
  * Function: v4t_early_abort
  *
- * Params  : r2 = address of aborted instruction
- *         : r3 = saved SPSR
+ * Params  : r2 = pt_regs
+ *	   : r4 = aborted context pc
+ *	   : r5 = aborted context psr
  *
- * Returns : r0 = address of abort
- *	   : r1 = FSR, bit 11 = write
- *	   : r2-r8 = corrupted
- *	   : r9 = preserved
- *	   : sp = pointer to registers
+ * Returns : r4 - r11, r13 preserved
  *
  * Purpose : obtain information about current aborted instruction.
  * Note: we read user space.  This means we might cause a data
@@ -22,9 +19,9 @@
 ENTRY(v4t_early_abort)
 	mrc	p15, 0, r1, c5, c0, 0		@ get FSR
 	mrc	p15, 0, r0, c6, c0, 0		@ get FAR
-	do_thumb_abort
-	ldreq	r3, [r2]			@ read aborted ARM instruction
+	do_thumb_abort fsr=r1, pc=r4, psr=r5, tmp=r3
+	ldreq	r3, [r4]			@ read aborted ARM instruction
 	bic	r1, r1, #1 << 11 | 1 << 10	@ clear bits 11 and 10 of FSR
 	tst	r3, #1 << 20			@ check write
 	orreq	r1, r1, #1 << 11
-	mov	pc, lr
+	b	do_DataAbort
diff --git a/arch/arm/mm/abort-ev5t.S b/arch/arm/mm/abort-ev5t.S
index 02251b526c0..a0908d4653a 100644
--- a/arch/arm/mm/abort-ev5t.S
+++ b/arch/arm/mm/abort-ev5t.S
@@ -4,14 +4,11 @@
 /*
  * Function: v5t_early_abort
  *
- * Params  : r2 = address of aborted instruction
- *         : r3 = saved SPSR
+ * Params  : r2 = pt_regs
+ *	   : r4 = aborted context pc
+ *	   : r5 = aborted context psr
  *
- * Returns : r0 = address of abort
- *	   : r1 = FSR, bit 11 = write
- *	   : r2-r8 = corrupted
- *	   : r9 = preserved
- *	   : sp = pointer to registers
+ * Returns : r4 - r11, r13 preserved
  *
  * Purpose : obtain information about current aborted instruction.
  * Note: we read user space.  This means we might cause a data
@@ -22,10 +19,10 @@
 ENTRY(v5t_early_abort)
 	mrc	p15, 0, r1, c5, c0, 0		@ get FSR
 	mrc	p15, 0, r0, c6, c0, 0		@ get FAR
-	do_thumb_abort
-	ldreq	r3, [r2]			@ read aborted ARM instruction
+	do_thumb_abort fsr=r1, pc=r4, psr=r5, tmp=r3
+	ldreq	r3, [r4]			@ read aborted ARM instruction
 	bic	r1, r1, #1 << 11		@ clear bits 11 of FSR
-	do_ldrd_abort
+	do_ldrd_abort tmp=ip, insn=r3
 	tst	r3, #1 << 20			@ check write
 	orreq	r1, r1, #1 << 11
-	mov	pc, lr
+	b	do_DataAbort
diff --git a/arch/arm/mm/abort-ev5tj.S b/arch/arm/mm/abort-ev5tj.S
index bce68d601c8..4006b7a6126 100644
--- a/arch/arm/mm/abort-ev5tj.S
+++ b/arch/arm/mm/abort-ev5tj.S
@@ -4,14 +4,11 @@
 /*
  * Function: v5tj_early_abort
  *
- * Params  : r2 = address of aborted instruction
- *         : r3 = saved SPSR
+ * Params  : r2 = pt_regs
+ *	   : r4 = aborted context pc
+ *	   : r5 = aborted context psr
  *
- * Returns : r0 = address of abort
- *	   : r1 = FSR, bit 11 = write
- *	   : r2-r8 = corrupted
- *	   : r9 = preserved
- *	   : sp = pointer to registers
+ * Returns : r4 - r11, r13 preserved
  *
  * Purpose : obtain information about current aborted instruction.
  * Note: we read user space.  This means we might cause a data
@@ -23,13 +20,11 @@ ENTRY(v5tj_early_abort)
 	mrc	p15, 0, r1, c5, c0, 0		@ get FSR
 	mrc	p15, 0, r0, c6, c0, 0		@ get FAR
 	bic	r1, r1, #1 << 11 | 1 << 10	@ clear bits 11 and 10 of FSR
-	tst	r3, #PSR_J_BIT			@ Java?
-	movne	pc, lr
-	do_thumb_abort
-	ldreq	r3, [r2]			@ read aborted ARM instruction
-	do_ldrd_abort
+	tst	r5, #PSR_J_BIT			@ Java?
+	bne	do_DataAbort
+	do_thumb_abort fsr=r1, pc=r4, psr=r5, tmp=r3
+	ldreq	r3, [r4]			@ read aborted ARM instruction
+	do_ldrd_abort tmp=ip, insn=r3
 	tst	r3, #1 << 20			@ L = 0 -> write
 	orreq	r1, r1, #1 << 11		@ yes.
-	mov	pc, lr
-
-
+	b	do_DataAbort
diff --git a/arch/arm/mm/abort-ev6.S b/arch/arm/mm/abort-ev6.S
index 1478aa52214..ff1f7cc11f8 100644
--- a/arch/arm/mm/abort-ev6.S
+++ b/arch/arm/mm/abort-ev6.S
@@ -4,14 +4,11 @@
 /*
  * Function: v6_early_abort
  *
- * Params  : r2 = address of aborted instruction
- *         : r3 = saved SPSR
+ * Params  : r2 = pt_regs
+ *	   : r4 = aborted context pc
+ *	   : r5 = aborted context psr
  *
- * Returns : r0 = address of abort
- *	   : r1 = FSR, bit 11 = write
- *	   : r2-r8 = corrupted
- *	   : r9 = preserved
- *	   : sp = pointer to registers
+ * Returns : r4 - r11, r13 preserved
  *
  * Purpose : obtain information about current aborted instruction.
  * Note: we read user space.  This means we might cause a data
@@ -33,16 +30,14 @@ ENTRY(v6_early_abort)
  * The test below covers all the write situations, including Java bytecodes
  */
 	bic	r1, r1, #1 << 11		@ clear bit 11 of FSR
-	tst	r3, #PSR_J_BIT			@ Java?
-	movne	pc, lr
-	do_thumb_abort
-	ldreq	r3, [r2]			@ read aborted ARM instruction
+	tst	r5, #PSR_J_BIT			@ Java?
+	bne	do_DataAbort
+	do_thumb_abort fsr=r1, pc=r4, psr=r5, tmp=r3
+	ldreq	r3, [r4]			@ read aborted ARM instruction
 #ifdef CONFIG_CPU_ENDIAN_BE8
 	reveq	r3, r3
 #endif
-	do_ldrd_abort
+	do_ldrd_abort tmp=ip, insn=r3
 	tst	r3, #1 << 20			@ L = 0 -> write
 	orreq	r1, r1, #1 << 11		@ yes.
-	mov	pc, lr
-
-
+	b	do_DataAbort
diff --git a/arch/arm/mm/abort-ev7.S b/arch/arm/mm/abort-ev7.S
index ec88b157d3b..703375277ba 100644
--- a/arch/arm/mm/abort-ev7.S
+++ b/arch/arm/mm/abort-ev7.S
@@ -3,14 +3,11 @@
 /*
  * Function: v7_early_abort
  *
- * Params  : r2 = address of aborted instruction
- *         : r3 = saved SPSR
+ * Params  : r2 = pt_regs
+ *	   : r4 = aborted context pc
+ *	   : r5 = aborted context psr
  *
- * Returns : r0 = address of abort
- *	   : r1 = FSR, bit 11 = write
- *	   : r2-r8 = corrupted
- *	   : r9 = preserved
- *	   : sp = pointer to registers
+ * Returns : r4 - r11, r13 preserved
  *
  * Purpose : obtain information about current aborted instruction.
  */
@@ -37,18 +34,18 @@ ENTRY(v7_early_abort)
 	ldr	r3, =0x40d			@ On permission fault
 	and	r3, r1, r3
 	cmp	r3, #0x0d
-	movne	pc, lr
+	bne	do_DataAbort
 
 	mcr	p15, 0, r0, c7, c8, 0   	@ Retranslate FAR
 	isb
-	mrc	p15, 0, r2, c7, c4, 0   	@ Read the PAR
-	and	r3, r2, #0x7b   		@ On translation fault
+	mrc	p15, 0, ip, c7, c4, 0   	@ Read the PAR
+	and	r3, ip, #0x7b   		@ On translation fault
 	cmp	r3, #0x0b
-	movne	pc, lr
+	bne	do_DataAbort
 	bic	r1, r1, #0xf			@ Fix up FSR FS[5:0]
-	and	r2, r2, #0x7e
-	orr	r1, r1, r2, LSR #1
+	and	ip, ip, #0x7e
+	orr	r1, r1, ip, LSR #1
 #endif
 
-	mov	pc, lr
+	b	do_DataAbort
 ENDPROC(v7_early_abort)
diff --git a/arch/arm/mm/abort-lv4t.S b/arch/arm/mm/abort-lv4t.S
index 9fb7b0e25ea..f3982580c27 100644
--- a/arch/arm/mm/abort-lv4t.S
+++ b/arch/arm/mm/abort-lv4t.S
@@ -3,14 +3,11 @@
 /*
  * Function: v4t_late_abort
  *
- * Params  : r2 = address of aborted instruction
- *         : r3 = saved SPSR
+ * Params  : r2 = pt_regs
+ *	   : r4 = aborted context pc
+ *	   : r5 = aborted context psr
  *
- * Returns : r0 = address of abort
- *	   : r1 = FSR, bit 11 = write
- *	   : r2-r8 = corrupted
- *	   : r9 = preserved
- *	   : sp = pointer to registers
+ * Returns : r4-r5, r10-r11, r13 preserved
  *
  * Purpose : obtain information about current aborted instruction.
  * Note: we read user space.  This means we might cause a data
@@ -18,7 +15,7 @@
  * picture.  Unfortunately, this does happen.  We live with it.
  */
 ENTRY(v4t_late_abort)
-	tst	r3, #PSR_T_BIT			@ check for thumb mode
+	tst	r5, #PSR_T_BIT			@ check for thumb mode
 #ifdef CONFIG_CPU_CP15_MMU
 	mrc	p15, 0, r1, c5, c0, 0		@ get FSR
 	mrc	p15, 0, r0, c6, c0, 0		@ get FAR
@@ -28,7 +25,7 @@ ENTRY(v4t_late_abort)
 	mov	r1, #0
 #endif
 	bne	.data_thumb_abort
-	ldr	r8, [r2]			@ read arm instruction
+	ldr	r8, [r4]			@ read arm instruction
 	tst	r8, #1 << 20			@ L = 1 -> write?
 	orreq	r1, r1, #1 << 11		@ yes.
 	and	r7, r8, #15 << 24
@@ -47,86 +44,84 @@ ENTRY(v4t_late_abort)
 /* 9 */	b	.data_arm_ldmstm		@ ldm*b	rn, <rlist>
 /* a */	b	.data_unknown
 /* b */	b	.data_unknown
-/* c */	mov	pc, lr				@ ldc	rd, [rn], #m	@ Same as ldr	rd, [rn], #m
-/* d */	mov	pc, lr				@ ldc	rd, [rn, #m]
+/* c */	b	do_DataAbort			@ ldc	rd, [rn], #m	@ Same as ldr	rd, [rn], #m
+/* d */	b	do_DataAbort			@ ldc	rd, [rn, #m]
 /* e */	b	.data_unknown
 /* f */
 .data_unknown:	@ Part of jumptable
-	mov	r0, r2
+	mov	r0, r4
 	mov	r1, r8
-	mov	r2, sp
-	bl	baddataabort
-	b	ret_from_exception
+	b	baddataabort
 
 .data_arm_ldmstm:
 	tst	r8, #1 << 21			@ check writeback bit
-	moveq	pc, lr				@ no writeback -> no fixup
+	beq	do_DataAbort			@ no writeback -> no fixup
 	mov	r7, #0x11
 	orr	r7, r7, #0x1100
 	and	r6, r8, r7
-	and	r2, r8, r7, lsl #1
-	add	r6, r6, r2, lsr #1
-	and	r2, r8, r7, lsl #2
-	add	r6, r6, r2, lsr #2
-	and	r2, r8, r7, lsl #3
-	add	r6, r6, r2, lsr #3
+	and	r9, r8, r7, lsl #1
+	add	r6, r6, r9, lsr #1
+	and	r9, r8, r7, lsl #2
+	add	r6, r6, r9, lsr #2
+	and	r9, r8, r7, lsl #3
+	add	r6, r6, r9, lsr #3
 	add	r6, r6, r6, lsr #8
 	add	r6, r6, r6, lsr #4
 	and	r6, r6, #15			@ r6 = no. of registers to transfer.
-	and	r5, r8, #15 << 16		@ Extract 'n' from instruction
-	ldr	r7, [sp, r5, lsr #14]		@ Get register 'Rn'
+	and	r9, r8, #15 << 16		@ Extract 'n' from instruction
+	ldr	r7, [r2, r9, lsr #14]		@ Get register 'Rn'
 	tst	r8, #1 << 23			@ Check U bit
 	subne	r7, r7, r6, lsl #2		@ Undo increment
 	addeq	r7, r7, r6, lsl #2		@ Undo decrement
-	str	r7, [sp, r5, lsr #14]		@ Put register 'Rn'
-	mov	pc, lr
+	str	r7, [r2, r9, lsr #14]		@ Put register 'Rn'
+	b	do_DataAbort
 
 .data_arm_lateldrhpre:
 	tst	r8, #1 << 21			@ Check writeback bit
-	moveq	pc, lr				@ No writeback -> no fixup
+	beq	do_DataAbort			@ No writeback -> no fixup
 .data_arm_lateldrhpost:
-	and	r5, r8, #0x00f			@ get Rm / low nibble of immediate value
+	and	r9, r8, #0x00f			@ get Rm / low nibble of immediate value
 	tst	r8, #1 << 22			@ if (immediate offset)
 	andne	r6, r8, #0xf00			@ { immediate high nibble
-	orrne	r6, r5, r6, lsr #4		@   combine nibbles } else
-	ldreq	r6, [sp, r5, lsl #2]		@ { load Rm value }
+	orrne	r6, r9, r6, lsr #4		@   combine nibbles } else
+	ldreq	r6, [r2, r9, lsl #2]		@ { load Rm value }
 .data_arm_apply_r6_and_rn:
-	and	r5, r8, #15 << 16		@ Extract 'n' from instruction
-	ldr	r7, [sp, r5, lsr #14]		@ Get register 'Rn'
+	and	r9, r8, #15 << 16		@ Extract 'n' from instruction
+	ldr	r7, [r2, r9, lsr #14]		@ Get register 'Rn'
 	tst	r8, #1 << 23			@ Check U bit
 	subne	r7, r7, r6			@ Undo incrmenet
 	addeq	r7, r7, r6			@ Undo decrement
-	str	r7, [sp, r5, lsr #14]		@ Put register 'Rn'
-	mov	pc, lr
+	str	r7, [r2, r9, lsr #14]		@ Put register 'Rn'
+	b	do_DataAbort
 
 .data_arm_lateldrpreconst:
 	tst	r8, #1 << 21			@ check writeback bit
-	moveq	pc, lr				@ no writeback -> no fixup
+	beq	do_DataAbort			@ no writeback -> no fixup
 .data_arm_lateldrpostconst:
-	movs	r2, r8, lsl #20			@ Get offset
-	moveq	pc, lr				@ zero -> no fixup
-	and	r5, r8, #15 << 16		@ Extract 'n' from instruction
-	ldr	r7, [sp, r5, lsr #14]		@ Get register 'Rn'
+	movs	r6, r8, lsl #20			@ Get offset
+	beq	do_DataAbort			@ zero -> no fixup
+	and	r9, r8, #15 << 16		@ Extract 'n' from instruction
+	ldr	r7, [r2, r9, lsr #14]		@ Get register 'Rn'
 	tst	r8, #1 << 23			@ Check U bit
-	subne	r7, r7, r2, lsr #20		@ Undo increment
-	addeq	r7, r7, r2, lsr #20		@ Undo decrement
-	str	r7, [sp, r5, lsr #14]		@ Put register 'Rn'
-	mov	pc, lr
+	subne	r7, r7, r6, lsr #20		@ Undo increment
+	addeq	r7, r7, r6, lsr #20		@ Undo decrement
+	str	r7, [r2, r9, lsr #14]		@ Put register 'Rn'
+	b	do_DataAbort
 
 .data_arm_lateldrprereg:
 	tst	r8, #1 << 21			@ check writeback bit
-	moveq	pc, lr				@ no writeback -> no fixup
+	beq	do_DataAbort			@ no writeback -> no fixup
 .data_arm_lateldrpostreg:
 	and	r7, r8, #15			@ Extract 'm' from instruction
-	ldr	r6, [sp, r7, lsl #2]		@ Get register 'Rm'
-	mov	r5, r8, lsr #7			@ get shift count
-	ands	r5, r5, #31
+	ldr	r6, [r2, r7, lsl #2]		@ Get register 'Rm'
+	mov	r9, r8, lsr #7			@ get shift count
+	ands	r9, r9, #31
 	and	r7, r8, #0x70			@ get shift type
 	orreq	r7, r7, #8			@ shift count = 0
 	add	pc, pc, r7
 	nop
 
-	mov	r6, r6, lsl r5			@ 0: LSL #!0
+	mov	r6, r6, lsl r9			@ 0: LSL #!0
 	b	.data_arm_apply_r6_and_rn
 	b	.data_arm_apply_r6_and_rn	@ 1: LSL #0
 	nop
@@ -134,7 +129,7 @@ ENTRY(v4t_late_abort)
 	nop
 	b	.data_unknown			@ 3: MUL?
 	nop
-	mov	r6, r6, lsr r5			@ 4: LSR #!0
+	mov	r6, r6, lsr r9			@ 4: LSR #!0
 	b	.data_arm_apply_r6_and_rn
 	mov	r6, r6, lsr #32			@ 5: LSR #32
 	b	.data_arm_apply_r6_and_rn
@@ -142,7 +137,7 @@ ENTRY(v4t_late_abort)
 	nop
 	b	.data_unknown			@ 7: MUL?
 	nop
-	mov	r6, r6, asr r5			@ 8: ASR #!0
+	mov	r6, r6, asr r9			@ 8: ASR #!0
 	b	.data_arm_apply_r6_and_rn
 	mov	r6, r6, asr #32			@ 9: ASR #32
 	b	.data_arm_apply_r6_and_rn
@@ -150,7 +145,7 @@ ENTRY(v4t_late_abort)
 	nop
 	b	.data_unknown			@ B: MUL?
 	nop
-	mov	r6, r6, ror r5			@ C: ROR #!0
+	mov	r6, r6, ror r9			@ C: ROR #!0
 	b	.data_arm_apply_r6_and_rn
 	mov	r6, r6, rrx			@ D: RRX
 	b	.data_arm_apply_r6_and_rn
@@ -159,7 +154,7 @@ ENTRY(v4t_late_abort)
 	b	.data_unknown			@ F: MUL?
 
 .data_thumb_abort:
-	ldrh	r8, [r2]			@ read instruction
+	ldrh	r8, [r4]			@ read instruction
 	tst	r8, #1 << 11			@ L = 1 -> write?
 	orreq	r1, r1, #1 << 8			@ yes
 	and	r7, r8, #15 << 12
@@ -172,10 +167,10 @@ ENTRY(v4t_late_abort)
 /* 3 */	b	.data_unknown
 /* 4 */	b	.data_unknown
 /* 5 */	b	.data_thumb_reg
-/* 6 */	mov	pc, lr
-/* 7 */	mov	pc, lr
-/* 8 */	mov	pc, lr
-/* 9 */	mov	pc, lr
+/* 6 */	b	do_DataAbort
+/* 7 */	b	do_DataAbort
+/* 8 */	b	do_DataAbort
+/* 9 */	b	do_DataAbort
 /* A */	b	.data_unknown
 /* B */	b	.data_thumb_pushpop
 /* C */	b	.data_thumb_ldmstm
@@ -185,41 +180,41 @@ ENTRY(v4t_late_abort)
 
 .data_thumb_reg:
 	tst	r8, #1 << 9
-	moveq	pc, lr
+	beq	do_DataAbort
 	tst	r8, #1 << 10			@ If 'S' (signed) bit is set
 	movne	r1, #0				@ it must be a load instr
-	mov	pc, lr
+	b	do_DataAbort
 
 .data_thumb_pushpop:
 	tst	r8, #1 << 10
 	beq	.data_unknown
 	and	r6, r8, #0x55			@ hweight8(r8) + R bit
-	and	r2, r8, #0xaa
-	add	r6, r6, r2, lsr #1
-	and	r2, r6, #0xcc
+	and	r9, r8, #0xaa
+	add	r6, r6, r9, lsr #1
+	and	r9, r6, #0xcc
 	and	r6, r6, #0x33
-	add	r6, r6, r2, lsr #2
+	add	r6, r6, r9, lsr #2
 	movs	r7, r8, lsr #9			@ C = r8 bit 8 (R bit)
 	adc	r6, r6, r6, lsr #4		@ high + low nibble + R bit
 	and	r6, r6, #15			@ number of regs to transfer
-	ldr	r7, [sp, #13 << 2]
+	ldr	r7, [r2, #13 << 2]
 	tst	r8, #1 << 11
 	addeq	r7, r7, r6, lsl #2		@ increment SP if PUSH
 	subne	r7, r7, r6, lsl #2		@ decrement SP if POP
-	str	r7, [sp, #13 << 2]
-	mov	pc, lr
+	str	r7, [r2, #13 << 2]
+	b	do_DataAbort
 
 .data_thumb_ldmstm:
 	and	r6, r8, #0x55			@ hweight8(r8)
-	and	r2, r8, #0xaa
-	add	r6, r6, r2, lsr #1
-	and	r2, r6, #0xcc
+	and	r9, r8, #0xaa
+	add	r6, r6, r9, lsr #1
+	and	r9, r6, #0xcc
 	and	r6, r6, #0x33
-	add	r6, r6, r2, lsr #2
+	add	r6, r6, r9, lsr #2
 	add	r6, r6, r6, lsr #4
-	and	r5, r8, #7 << 8
-	ldr	r7, [sp, r5, lsr #6]
+	and	r9, r8, #7 << 8
+	ldr	r7, [r2, r9, lsr #6]
 	and	r6, r6, #15			@ number of regs to transfer
 	sub	r7, r7, r6, lsl #2		@ always decrement
-	str	r7, [sp, r5, lsr #6]
-	mov	pc, lr
+	str	r7, [r2, r9, lsr #6]
+	b	do_DataAbort
diff --git a/arch/arm/mm/abort-macro.S b/arch/arm/mm/abort-macro.S
index d7cb1bfa51a..52162d59407 100644
--- a/arch/arm/mm/abort-macro.S
+++ b/arch/arm/mm/abort-macro.S
@@ -9,34 +9,32 @@
  *
  */
 
-	.macro	do_thumb_abort
-	tst	r3, #PSR_T_BIT
+	.macro	do_thumb_abort, fsr, pc, psr, tmp
+	tst	\psr, #PSR_T_BIT
 	beq	not_thumb
-	ldrh	r3, [r2]			@ Read aborted Thumb instruction
-	and	r3, r3, # 0xfe00		@ Mask opcode field
-	cmp	r3, # 0x5600			@ Is it ldrsb?
-	orreq	r3, r3, #1 << 11		@ Set L-bit if yes
-	tst	r3, #1 << 11			@ L = 0 -> write
-	orreq	r1, r1, #1 << 11		@ yes.
-	mov	pc, lr
+	ldrh	\tmp, [\pc]			@ Read aborted Thumb instruction
+	and	\tmp, \tmp, # 0xfe00		@ Mask opcode field
+	cmp	\tmp, # 0x5600			@ Is it ldrsb?
+	orreq	\tmp, \tmp, #1 << 11		@ Set L-bit if yes
+	tst	\tmp, #1 << 11			@ L = 0 -> write
+	orreq	\psr, \psr, #1 << 11		@ yes.
+	b	do_DataAbort
 not_thumb:
 	.endm
 
 /*
- * We check for the following insturction encoding for LDRD.
+ * We check for the following instruction encoding for LDRD.
  *
- * [27:25] == 0
+ * [27:25] == 000
  *   [7:4] == 1101
  *    [20] == 0
  */
- 	.macro	do_ldrd_abort
- 	tst	r3, #0x0e000000			@ [27:25] == 0
+	.macro	do_ldrd_abort, tmp, insn
+	tst	\insn, #0x0e100000		@ [27:25,20] == 0
 	bne	not_ldrd
-	and	r2, r3, #0x000000f0		@ [7:4] == 1101
-	cmp	r2, #0x000000d0
-	bne	not_ldrd
-	tst	r3, #1 << 20			@ [20] == 0
-	moveq	pc, lr
+	and	\tmp, \insn, #0x000000f0	@ [7:4] == 1101
+	cmp	\tmp, #0x000000d0
+	beq	do_DataAbort
 not_ldrd:
 	.endm
 
diff --git a/arch/arm/mm/abort-nommu.S b/arch/arm/mm/abort-nommu.S
index 625e580945b..119cb479c2a 100644
--- a/arch/arm/mm/abort-nommu.S
+++ b/arch/arm/mm/abort-nommu.S
@@ -3,11 +3,11 @@
 /*
  * Function: nommu_early_abort
  *
- * Params  : r2 = address of aborted instruction
- *         : r3 = saved SPSR
+ * Params  : r2 = pt_regs
+ *	   : r4 = aborted context pc
+ *	   : r5 = aborted context psr
  *
- * Returns : r0 = 0 (abort address)
- *	   : r1 = 0 (FSR)
+ * Returns : r4 - r11, r13 preserved
  *
  * Note: There is no FSR/FAR on !CPU_CP15_MMU cores.
  *       Just fill zero into the registers.
@@ -16,5 +16,5 @@
 ENTRY(nommu_early_abort)
 	mov	r0, #0				@ clear r0, r1 (no FSR/FAR)
 	mov	r1, #0
-	mov	pc, lr
+	b	do_DataAbort
 ENDPROC(nommu_early_abort)
diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c
index 724ba3bce72..be7c638b648 100644
--- a/arch/arm/mm/alignment.c
+++ b/arch/arm/mm/alignment.c
@@ -727,6 +727,9 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 	int isize = 4;
 	int thumb2_32b = 0;
 
+	if (interrupts_enabled(regs))
+		local_irq_enable();
+
 	instrptr = instruction_pointer(regs);
 
 	fs = get_fs();
diff --git a/arch/arm/mm/copypage-v6.c b/arch/arm/mm/copypage-v6.c
index bdba6c65c90..63cca009713 100644
--- a/arch/arm/mm/copypage-v6.c
+++ b/arch/arm/mm/copypage-v6.c
@@ -41,7 +41,6 @@ static void v6_copy_user_highpage_nonaliasing(struct page *to,
 	kfrom = kmap_atomic(from, KM_USER0);
 	kto = kmap_atomic(to, KM_USER1);
 	copy_page(kto, kfrom);
-	__cpuc_flush_dcache_area(kto, PAGE_SIZE);
 	kunmap_atomic(kto, KM_USER1);
 	kunmap_atomic(kfrom, KM_USER0);
 }
diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index bc0e1d88fd3..55657c222d7 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -94,7 +94,7 @@ void show_pte(struct mm_struct *mm, unsigned long addr)
 
 		pud = pud_offset(pgd, addr);
 		if (PTRS_PER_PUD != 1)
-			printk(", *pud=%08lx", pud_val(*pud));
+			printk(", *pud=%08llx", (long long)pud_val(*pud));
 
 		if (pud_none(*pud))
 			break;
@@ -285,6 +285,10 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 	tsk = current;
 	mm  = tsk->mm;
 
+	/* Enable interrupts if they were enabled in the parent context. */
+	if (interrupts_enabled(regs))
+		local_irq_enable();
+
 	/*
 	 * If we're in an interrupt or have no user
 	 * context, we must not take the fault..
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 90a38c6baca..2fee782077c 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -434,6 +434,17 @@ static inline int free_area(unsigned long pfn, unsigned long end, char *s)
 	return pages;
 }
 
+/*
+ * Poison init memory with an undefined instruction (ARM) or a branch to an
+ * undefined instruction (Thumb).
+ */
+static inline void poison_init_mem(void *s, size_t count)
+{
+	u32 *p = (u32 *)s;
+	while ((count = count - 4))
+		*p++ = 0xe7fddef0;
+}
+
 static inline void
 free_memmap(unsigned long start_pfn, unsigned long end_pfn)
 {
@@ -651,8 +662,8 @@ void __init mem_init(void)
 			"    pkmap   : 0x%08lx - 0x%08lx   (%4ld MB)\n"
 #endif
 			"    modules : 0x%08lx - 0x%08lx   (%4ld MB)\n"
-			"      .init : 0x%p" " - 0x%p" "   (%4d kB)\n"
 			"      .text : 0x%p" " - 0x%p" "   (%4d kB)\n"
+			"      .init : 0x%p" " - 0x%p" "   (%4d kB)\n"
 			"      .data : 0x%p" " - 0x%p" "   (%4d kB)\n"
 			"       .bss : 0x%p" " - 0x%p" "   (%4d kB)\n",
 
@@ -674,8 +685,8 @@ void __init mem_init(void)
 #endif
 			MLM(MODULES_VADDR, MODULES_END),
 
-			MLK_ROUNDUP(__init_begin, __init_end),
 			MLK_ROUNDUP(_text, _etext),
+			MLK_ROUNDUP(__init_begin, __init_end),
 			MLK_ROUNDUP(_sdata, _edata),
 			MLK_ROUNDUP(__bss_start, __bss_stop));
 
@@ -716,11 +727,13 @@ void free_initmem(void)
 #ifdef CONFIG_HAVE_TCM
 	extern char __tcm_start, __tcm_end;
 
+	poison_init_mem(&__tcm_start, &__tcm_end - &__tcm_start);
 	totalram_pages += free_area(__phys_to_pfn(__pa(&__tcm_start)),
 				    __phys_to_pfn(__pa(&__tcm_end)),
 				    "TCM link");
 #endif
 
+	poison_init_mem(__init_begin, __init_end - __init_begin);
 	if (!machine_is_integrator() && !machine_is_cintegrator())
 		totalram_pages += free_area(__phys_to_pfn(__pa(__init_begin)),
 					    __phys_to_pfn(__pa(__init_end)),
@@ -733,10 +746,12 @@ static int keep_initrd;
 
 void free_initrd_mem(unsigned long start, unsigned long end)
 {
-	if (!keep_initrd)
+	if (!keep_initrd) {
+		poison_init_mem((void *)start, PAGE_ALIGN(end) - start);
 		totalram_pages += free_area(__phys_to_pfn(__pa(start)),
 					    __phys_to_pfn(__pa(end)),
 					    "initrd");
+	}
 }
 
 static int __init keepinitrd_setup(char *__unused)
diff --git a/arch/arm/mm/pabort-legacy.S b/arch/arm/mm/pabort-legacy.S
index 87970eba88e..8bbff025269 100644
--- a/arch/arm/mm/pabort-legacy.S
+++ b/arch/arm/mm/pabort-legacy.S
@@ -4,16 +4,18 @@
 /*
  * Function: legacy_pabort
  *
- * Params  : r0 = address of aborted instruction
+ * Params  : r2 = pt_regs
+ *	   : r4 = address of aborted instruction
+ *	   : r5 = psr for parent context
  *
- * Returns : r0 = address of abort
- *	   : r1 = Simulated IFSR with section translation fault status
+ * Returns : r4 - r11, r13 preserved
  *
  * Purpose : obtain information about current prefetch abort.
  */
 
 	.align	5
 ENTRY(legacy_pabort)
+	mov	r0, r4
 	mov	r1, #5
-	mov	pc, lr
+	b	do_PrefetchAbort
 ENDPROC(legacy_pabort)
diff --git a/arch/arm/mm/pabort-v6.S b/arch/arm/mm/pabort-v6.S
index 06e3d1ef211..9627646ce78 100644
--- a/arch/arm/mm/pabort-v6.S
+++ b/arch/arm/mm/pabort-v6.S
@@ -4,16 +4,18 @@
 /*
  * Function: v6_pabort
  *
- * Params  : r0 = address of aborted instruction
+ * Params  : r2 = pt_regs
+ *	   : r4 = address of aborted instruction
+ *	   : r5 = psr for parent context
  *
- * Returns : r0 = address of abort
- *	   : r1 = IFSR
+ * Returns : r4 - r11, r13 preserved
  *
  * Purpose : obtain information about current prefetch abort.
  */
 
 	.align	5
 ENTRY(v6_pabort)
+	mov	r0, r4
 	mrc	p15, 0, r1, c5, c0, 1		@ get IFSR
-	mov	pc, lr
+	b	do_PrefetchAbort
 ENDPROC(v6_pabort)
diff --git a/arch/arm/mm/pabort-v7.S b/arch/arm/mm/pabort-v7.S
index a8b3b300a18..875761f44f3 100644
--- a/arch/arm/mm/pabort-v7.S
+++ b/arch/arm/mm/pabort-v7.S
@@ -2,12 +2,13 @@
 #include <asm/assembler.h>
 
 /*
- * Function: v6_pabort
+ * Function: v7_pabort
  *
- * Params  : r0 = address of aborted instruction
+ * Params  : r2 = pt_regs
+ *	   : r4 = address of aborted instruction
+ *	   : r5 = psr for parent context
  *
- * Returns : r0 = address of abort
- *	   : r1 = IFSR
+ * Returns : r4 - r11, r13 preserved
  *
  * Purpose : obtain information about current prefetch abort.
  */
@@ -16,5 +17,5 @@
 ENTRY(v7_pabort)
 	mrc	p15, 0, r0, c6, c0, 2		@ get IFAR
 	mrc	p15, 0, r1, c5, c0, 1		@ get IFSR
-	mov	pc, lr
+	b	do_PrefetchAbort
 ENDPROC(v7_pabort)
diff --git a/arch/arm/mm/proc-arm6_7.S b/arch/arm/mm/proc-arm6_7.S
index ebc0ca7f1a1..e5b974cddac 100644
--- a/arch/arm/mm/proc-arm6_7.S
+++ b/arch/arm/mm/proc-arm6_7.S
@@ -29,19 +29,19 @@ ENTRY(cpu_arm7_dcache_clean_area)
 /*
  * Function: arm6_7_data_abort ()
  *
- * Params  : r2 = address of aborted instruction
- *	   : sp = pointer to registers
+ * Params  : r2 = pt_regs
+ *	   : r4 = aborted context pc
+ *	   : r5 = aborted context psr
  *
  * Purpose : obtain information about current aborted instruction
  *
- * Returns : r0 = address of abort
- *	   : r1 = FSR
+ * Returns : r4-r5, r10-r11, r13 preserved
  */
 
 ENTRY(cpu_arm7_data_abort)
 	mrc	p15, 0, r1, c5, c0, 0		@ get FSR
 	mrc	p15, 0, r0, c6, c0, 0		@ get FAR
-	ldr	r8, [r2]			@ read arm instruction
+	ldr	r8, [r4]			@ read arm instruction
 	tst	r8, #1 << 20			@ L = 0 -> write?
 	orreq	r1, r1, #1 << 11		@ yes.
 	and	r7, r8, #15 << 24
@@ -49,7 +49,7 @@ ENTRY(cpu_arm7_data_abort)
 	nop
 
 /* 0 */	b	.data_unknown
-/* 1 */	mov	pc, lr				@ swp
+/* 1 */	b	do_DataAbort			@ swp
 /* 2 */	b	.data_unknown
 /* 3 */	b	.data_unknown
 /* 4 */	b	.data_arm_lateldrpostconst	@ ldr	rd, [rn], #m
@@ -60,87 +60,85 @@ ENTRY(cpu_arm7_data_abort)
 /* 9 */	b	.data_arm_ldmstm		@ ldm*b	rn, <rlist>
 /* a */	b	.data_unknown
 /* b */	b	.data_unknown
-/* c */	mov	pc, lr				@ ldc	rd, [rn], #m	@ Same as ldr	rd, [rn], #m
-/* d */	mov	pc, lr				@ ldc	rd, [rn, #m]
+/* c */	b	do_DataAbort			@ ldc	rd, [rn], #m	@ Same as ldr	rd, [rn], #m
+/* d */	b	do_DataAbort			@ ldc	rd, [rn, #m]
 /* e */	b	.data_unknown
 /* f */
 .data_unknown:	@ Part of jumptable
-	mov	r0, r2
+	mov	r0, r4
 	mov	r1, r8
-	mov	r2, sp
-	bl	baddataabort
-	b	ret_from_exception
+	b	baddataabort
 
 ENTRY(cpu_arm6_data_abort)
 	mrc	p15, 0, r1, c5, c0, 0		@ get FSR
 	mrc	p15, 0, r0, c6, c0, 0		@ get FAR
-	ldr	r8, [r2]			@ read arm instruction
+	ldr	r8, [r4]			@ read arm instruction
 	tst	r8, #1 << 20			@ L = 0 -> write?
 	orreq	r1, r1, #1 << 11		@ yes.
 	and	r7, r8, #14 << 24
 	teq	r7, #8 << 24			@ was it ldm/stm
-	movne	pc, lr
+	bne	do_DataAbort
 
 .data_arm_ldmstm:
 	tst	r8, #1 << 21			@ check writeback bit
-	moveq	pc, lr				@ no writeback -> no fixup
+	beq	do_DataAbort			@ no writeback -> no fixup
 	mov	r7, #0x11
 	orr	r7, r7, #0x1100
 	and	r6, r8, r7
-	and	r2, r8, r7, lsl #1
-	add	r6, r6, r2, lsr #1
-	and	r2, r8, r7, lsl #2
-	add	r6, r6, r2, lsr #2
-	and	r2, r8, r7, lsl #3
-	add	r6, r6, r2, lsr #3
+	and	r9, r8, r7, lsl #1
+	add	r6, r6, r9, lsr #1
+	and	r9, r8, r7, lsl #2
+	add	r6, r6, r9, lsr #2
+	and	r9, r8, r7, lsl #3
+	add	r6, r6, r9, lsr #3
 	add	r6, r6, r6, lsr #8
 	add	r6, r6, r6, lsr #4
 	and	r6, r6, #15			@ r6 = no. of registers to transfer.
-	and	r5, r8, #15 << 16		@ Extract 'n' from instruction
-	ldr	r7, [sp, r5, lsr #14]		@ Get register 'Rn'
+	and	r9, r8, #15 << 16		@ Extract 'n' from instruction
+	ldr	r7, [r2, r9, lsr #14]		@ Get register 'Rn'
 	tst	r8, #1 << 23			@ Check U bit
 	subne	r7, r7, r6, lsl #2		@ Undo increment
 	addeq	r7, r7, r6, lsl #2		@ Undo decrement
-	str	r7, [sp, r5, lsr #14]		@ Put register 'Rn'
-	mov	pc, lr
+	str	r7, [r2, r9, lsr #14]		@ Put register 'Rn'
+	b	do_DataAbort
 
 .data_arm_apply_r6_and_rn:
-	and	r5, r8, #15 << 16		@ Extract 'n' from instruction
-	ldr	r7, [sp, r5, lsr #14]		@ Get register 'Rn'
+	and	r9, r8, #15 << 16		@ Extract 'n' from instruction
+	ldr	r7, [r2, r9, lsr #14]		@ Get register 'Rn'
 	tst	r8, #1 << 23			@ Check U bit
 	subne	r7, r7, r6			@ Undo incrmenet
 	addeq	r7, r7, r6			@ Undo decrement
-	str	r7, [sp, r5, lsr #14]		@ Put register 'Rn'
-	mov	pc, lr
+	str	r7, [r2, r9, lsr #14]		@ Put register 'Rn'
+	b	do_DataAbort
 
 .data_arm_lateldrpreconst:
 	tst	r8, #1 << 21			@ check writeback bit
-	moveq	pc, lr				@ no writeback -> no fixup
+	beq	do_DataAbort			@ no writeback -> no fixup
 .data_arm_lateldrpostconst:
-	movs	r2, r8, lsl #20			@ Get offset
-	moveq	pc, lr				@ zero -> no fixup
-	and	r5, r8, #15 << 16		@ Extract 'n' from instruction
-	ldr	r7, [sp, r5, lsr #14]		@ Get register 'Rn'
+	movs	r6, r8, lsl #20			@ Get offset
+	beq	do_DataAbort			@ zero -> no fixup
+	and	r9, r8, #15 << 16		@ Extract 'n' from instruction
+	ldr	r7, [r2, r9, lsr #14]		@ Get register 'Rn'
 	tst	r8, #1 << 23			@ Check U bit
-	subne	r7, r7, r2, lsr #20		@ Undo increment
-	addeq	r7, r7, r2, lsr #20		@ Undo decrement
-	str	r7, [sp, r5, lsr #14]		@ Put register 'Rn'
-	mov	pc, lr
+	subne	r7, r7, r6, lsr #20		@ Undo increment
+	addeq	r7, r7, r6, lsr #20		@ Undo decrement
+	str	r7, [r2, r9, lsr #14]		@ Put register 'Rn'
+	b	do_DataAbort
 
 .data_arm_lateldrprereg:
 	tst	r8, #1 << 21			@ check writeback bit
-	moveq	pc, lr				@ no writeback -> no fixup
+	beq	do_DataAbort			@ no writeback -> no fixup
 .data_arm_lateldrpostreg:
 	and	r7, r8, #15			@ Extract 'm' from instruction
-	ldr	r6, [sp, r7, lsl #2]		@ Get register 'Rm'
-	mov	r5, r8, lsr #7			@ get shift count
-	ands	r5, r5, #31
+	ldr	r6, [r2, r7, lsl #2]		@ Get register 'Rm'
+	mov	r9, r8, lsr #7			@ get shift count
+	ands	r9, r9, #31
 	and	r7, r8, #0x70			@ get shift type
 	orreq	r7, r7, #8			@ shift count = 0
 	add	pc, pc, r7
 	nop
 
-	mov	r6, r6, lsl r5			@ 0: LSL #!0
+	mov	r6, r6, lsl r9			@ 0: LSL #!0
 	b	.data_arm_apply_r6_and_rn
 	b	.data_arm_apply_r6_and_rn	@ 1: LSL #0
 	nop
@@ -148,7 +146,7 @@ ENTRY(cpu_arm6_data_abort)
 	nop
 	b	.data_unknown			@ 3: MUL?
 	nop
-	mov	r6, r6, lsr r5			@ 4: LSR #!0
+	mov	r6, r6, lsr r9			@ 4: LSR #!0
 	b	.data_arm_apply_r6_and_rn
 	mov	r6, r6, lsr #32			@ 5: LSR #32
 	b	.data_arm_apply_r6_and_rn
@@ -156,7 +154,7 @@ ENTRY(cpu_arm6_data_abort)
 	nop
 	b	.data_unknown			@ 7: MUL?
 	nop
-	mov	r6, r6, asr r5			@ 8: ASR #!0
+	mov	r6, r6, asr r9			@ 8: ASR #!0
 	b	.data_arm_apply_r6_and_rn
 	mov	r6, r6, asr #32			@ 9: ASR #32
 	b	.data_arm_apply_r6_and_rn
@@ -164,7 +162,7 @@ ENTRY(cpu_arm6_data_abort)
 	nop
 	b	.data_unknown			@ B: MUL?
 	nop
-	mov	r6, r6, ror r5			@ C: ROR #!0
+	mov	r6, r6, ror r9			@ C: ROR #!0
 	b	.data_arm_apply_r6_and_rn
 	mov	r6, r6, rrx			@ D: RRX
 	b	.data_arm_apply_r6_and_rn
diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S
index e71587852ca..07219c2ae11 100644
--- a/arch/arm/mm/proc-sa1100.S
+++ b/arch/arm/mm/proc-sa1100.S
@@ -34,7 +34,7 @@
  */
 #define DCACHELINESIZE	32
 
-	__INIT
+	.section .text
 
 /*
  * cpu_sa1100_proc_init()
@@ -45,8 +45,6 @@ ENTRY(cpu_sa1100_proc_init)
 	mcr	p15, 0, r0, c9, c0, 5		@ Allow read-buffer operations from userland
 	mov	pc, lr
 
-	.section .text
-
 /*
  * cpu_sa1100_proc_fin()
  *
diff --git a/arch/arm/mm/tlb-fa.S b/arch/arm/mm/tlb-fa.S
index 7a2e56c5d89..d3ddcf9a76c 100644
--- a/arch/arm/mm/tlb-fa.S
+++ b/arch/arm/mm/tlb-fa.S
@@ -46,7 +46,6 @@ ENTRY(fa_flush_user_tlb_range)
 	add	r0, r0, #PAGE_SZ
 	cmp	r0, r1
 	blo	1b
-	mcr	p15, 0, r3, c7, c5, 6		@ invalidate BTB
 	mcr	p15, 0, r3, c7, c10, 4		@ data write barrier
 	mov	pc, lr
 
@@ -60,9 +59,8 @@ ENTRY(fa_flush_kern_tlb_range)
 	add	r0, r0, #PAGE_SZ
 	cmp	r0, r1
 	blo	1b
-	mcr	p15, 0, r3, c7, c5, 6		@ invalidate BTB
 	mcr	p15, 0, r3, c7, c10, 4		@ data write barrier
-	mcr	p15, 0, r3, c7, c5, 4		@ prefetch flush
+	mcr	p15, 0, r3, c7, c5, 4		@ prefetch flush (isb)
 	mov	pc, lr
 
 	__INITDATA
diff --git a/arch/arm/mm/tlb-v6.S b/arch/arm/mm/tlb-v6.S
index a685944735c..eca07f550a0 100644
--- a/arch/arm/mm/tlb-v6.S
+++ b/arch/arm/mm/tlb-v6.S
@@ -54,7 +54,6 @@ ENTRY(v6wbi_flush_user_tlb_range)
 	add	r0, r0, #PAGE_SZ
 	cmp	r0, r1
 	blo	1b
-	mcr	p15, 0, ip, c7, c5, 6		@ flush BTAC/BTB
 	mcr	p15, 0, ip, c7, c10, 4		@ data synchronization barrier
 	mov	pc, lr
 
@@ -83,9 +82,8 @@ ENTRY(v6wbi_flush_kern_tlb_range)
 	add	r0, r0, #PAGE_SZ
 	cmp	r0, r1
 	blo	1b
-	mcr	p15, 0, r2, c7, c5, 6		@ flush BTAC/BTB
 	mcr	p15, 0, r2, c7, c10, 4		@ data synchronization barrier
-	mcr	p15, 0, r2, c7, c5, 4		@ prefetch flush
+	mcr	p15, 0, r2, c7, c5, 4		@ prefetch flush (isb)
 	mov	pc, lr
 
 	__INIT
diff --git a/arch/arm/mm/tlb-v7.S b/arch/arm/mm/tlb-v7.S
index ebd4290ce1e..845f461f8ec 100644
--- a/arch/arm/mm/tlb-v7.S
+++ b/arch/arm/mm/tlb-v7.S
@@ -48,9 +48,6 @@ ENTRY(v7wbi_flush_user_tlb_range)
 	add	r0, r0, #PAGE_SZ
 	cmp	r0, r1
 	blo	1b
-	mov	ip, #0
-	ALT_SMP(mcr	p15, 0, ip, c7, c1, 6)	@ flush BTAC/BTB Inner Shareable
-	ALT_UP(mcr	p15, 0, ip, c7, c5, 6)	@ flush BTAC/BTB
 	dsb
 	mov	pc, lr
 ENDPROC(v7wbi_flush_user_tlb_range)
@@ -75,9 +72,6 @@ ENTRY(v7wbi_flush_kern_tlb_range)
 	add	r0, r0, #PAGE_SZ
 	cmp	r0, r1
 	blo	1b
-	mov	r2, #0
-	ALT_SMP(mcr	p15, 0, r2, c7, c1, 6)	@ flush BTAC/BTB Inner Shareable
-	ALT_UP(mcr	p15, 0, r2, c7, c5, 6)	@ flush BTAC/BTB
 	dsb
 	isb
 	mov	pc, lr
diff --git a/arch/arm/plat-mxc/include/mach/entry-macro.S b/arch/arm/plat-mxc/include/mach/entry-macro.S
index 2e49e71b1b9..066d464d322 100644
--- a/arch/arm/plat-mxc/include/mach/entry-macro.S
+++ b/arch/arm/plat-mxc/include/mach/entry-macro.S
@@ -78,7 +78,3 @@
 	movs \irqnr, \irqnr
 #endif
 	.endm
-
-	@ irq priority table (not used)
-	.macro	irq_prio_table
-	.endm
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 6af3d0b1f8d..363c91e44ef 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -394,20 +394,15 @@ void omap3_sram_restore_context(void)
 }
 #endif /* CONFIG_PM */
 
-static int __init omap34xx_sram_init(void)
-{
-	_omap3_sram_configure_core_dpll =
-		omap_sram_push(omap3_sram_configure_core_dpll,
-			       omap3_sram_configure_core_dpll_sz);
-	omap_push_sram_idle();
-	return 0;
-}
-#else
+#endif /* CONFIG_ARCH_OMAP3 */
+
 static inline int omap34xx_sram_init(void)
 {
+#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
+	omap3_sram_restore_context();
+#endif
 	return 0;
 }
-#endif
 
 int __init omap_sram_init(void)
 {
diff --git a/arch/arm/plat-s3c24xx/sleep.S b/arch/arm/plat-s3c24xx/sleep.S
index fd7032f84ae..c56612569b4 100644
--- a/arch/arm/plat-s3c24xx/sleep.S
+++ b/arch/arm/plat-s3c24xx/sleep.S
@@ -41,31 +41,6 @@
 
 	.text
 
-	/* s3c_cpu_save
-	 *
-	 * entry:
-	 *	r1 = v:p offset
-	*/
-
-ENTRY(s3c_cpu_save)
-	stmfd	sp!, { r4 - r12, lr }
-	ldr	r3, =resume_with_mmu
-	bl	cpu_suspend
-
-	@@ jump to final code to send system to sleep
-	ldr	r0, =pm_cpu_sleep
-	@@ldr	pc, [ r0 ]
-	ldr	r0, [ r0 ]
-	mov	pc, r0
-	
-	@@ return to the caller, after having the MMU
-	@@ turned on, this restores the last bits from the
-	@@ stack
-resume_with_mmu:
-	ldmfd	sp!, { r4 - r12, pc }
-
-	.ltorg
-
 	/* sleep magic, to allow the bootloader to check for an valid
 	 * image to resume to. Must be the first word before the
 	 * s3c_cpu_resume entry.
diff --git a/arch/arm/plat-samsung/include/plat/pm.h b/arch/arm/plat-samsung/include/plat/pm.h
index 7fb6f6be8c8..f6749916d19 100644
--- a/arch/arm/plat-samsung/include/plat/pm.h
+++ b/arch/arm/plat-samsung/include/plat/pm.h
@@ -42,7 +42,7 @@ extern unsigned long s3c_irqwake_eintallow;
 /* per-cpu sleep functions */
 
 extern void (*pm_cpu_prep)(void);
-extern void (*pm_cpu_sleep)(void);
+extern int (*pm_cpu_sleep)(unsigned long);
 
 /* Flags for PM Control */
 
@@ -52,10 +52,9 @@ extern unsigned char pm_uart_udivslot;  /* true to save UART UDIVSLOT */
 
 /* from sleep.S */
 
-extern int  s3c_cpu_save(unsigned long *saveblk, long);
 extern void s3c_cpu_resume(void);
 
-extern void s3c2410_cpu_suspend(void);
+extern int s3c2410_cpu_suspend(unsigned long);
 
 /* sleep save info */
 
diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c
index 5c0a440d6e1..5fa1742d019 100644
--- a/arch/arm/plat-samsung/pm.c
+++ b/arch/arm/plat-samsung/pm.c
@@ -20,6 +20,7 @@
 #include <linux/io.h>
 
 #include <asm/cacheflush.h>
+#include <asm/suspend.h>
 #include <mach/hardware.h>
 #include <mach/map.h>
 
@@ -231,7 +232,7 @@ static void __maybe_unused s3c_pm_show_resume_irqs(int start,
 
 
 void (*pm_cpu_prep)(void);
-void (*pm_cpu_sleep)(void);
+int (*pm_cpu_sleep)(unsigned long);
 
 #define any_allowed(mask, allow) (((mask) & (allow)) != (allow))
 
@@ -294,15 +295,11 @@ static int s3c_pm_enter(suspend_state_t state)
 
 	s3c_pm_arch_stop_clocks();
 
-	/* s3c_cpu_save will also act as our return point from when
+	/* this will also act as our return point from when
 	 * we resume as it saves its own register state and restores it
 	 * during the resume.  */
 
-	s3c_cpu_save(0, PLAT_PHYS_OFFSET - PAGE_OFFSET);
-
-	/* restore the cpu state using the kernel's cpu init code. */
-
-	cpu_init();
+	cpu_suspend(0, pm_cpu_sleep);
 
 	/* restore the system state */
 
diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S
index 9897dcfc16d..2d30c7f6edd 100644
--- a/arch/arm/vfp/vfphw.S
+++ b/arch/arm/vfp/vfphw.S
@@ -77,27 +77,27 @@ ENTRY(vfp_support_entry)
 	bne	look_for_VFP_exceptions	@ VFP is already enabled
 
 	DBGSTR1 "enable %x", r10
-	ldr	r3, last_VFP_context_address
+	ldr	r3, vfp_current_hw_state_address
 	orr	r1, r1, #FPEXC_EN	@ user FPEXC has the enable bit set
-	ldr	r4, [r3, r11, lsl #2]	@ last_VFP_context pointer
+	ldr	r4, [r3, r11, lsl #2]	@ vfp_current_hw_state pointer
 	bic	r5, r1, #FPEXC_EX	@ make sure exceptions are disabled
-	cmp	r4, r10
-	beq	check_for_exception	@ we are returning to the same
-					@ process, so the registers are
-					@ still there.  In this case, we do
-					@ not want to drop a pending exception.
+	cmp	r4, r10			@ this thread owns the hw context?
+#ifndef CONFIG_SMP
+	@ For UP, checking that this thread owns the hw context is
+	@ sufficient to determine that the hardware state is valid.
+	beq	vfp_hw_state_valid
+
+	@ On UP, we lazily save the VFP context.  As a different
+	@ thread wants ownership of the VFP hardware, save the old
+	@ state if there was a previous (valid) owner.
 
 	VFPFMXR	FPEXC, r5		@ enable VFP, disable any pending
 					@ exceptions, so we can get at the
 					@ rest of it
 
-#ifndef CONFIG_SMP
-	@ Save out the current registers to the old thread state
-	@ No need for SMP since this is not done lazily
-
 	DBGSTR1	"save old state %p", r4
-	cmp	r4, #0
-	beq	no_old_VFP_process
+	cmp	r4, #0			@ if the vfp_current_hw_state is NULL
+	beq	vfp_reload_hw		@ then the hw state needs reloading
 	VFPFSTMIA r4, r5		@ save the working registers
 	VFPFMRX	r5, FPSCR		@ current status
 #ifndef CONFIG_CPU_FEROCEON
@@ -110,13 +110,35 @@ ENTRY(vfp_support_entry)
 1:
 #endif
 	stmia	r4, {r1, r5, r6, r8}	@ save FPEXC, FPSCR, FPINST, FPINST2
-					@ and point r4 at the word at the
-					@ start of the register dump
+vfp_reload_hw:
+
+#else
+	@ For SMP, if this thread does not own the hw context, then we
+	@ need to reload it.  No need to save the old state as on SMP,
+	@ we always save the state when we switch away from a thread.
+	bne	vfp_reload_hw
+
+	@ This thread has ownership of the current hardware context.
+	@ However, it may have been migrated to another CPU, in which
+	@ case the saved state is newer than the hardware context.
+	@ Check this by looking at the CPU number which the state was
+	@ last loaded onto.
+	ldr	ip, [r10, #VFP_CPU]
+	teq	ip, r11
+	beq	vfp_hw_state_valid
+
+vfp_reload_hw:
+	@ We're loading this threads state into the VFP hardware. Update
+	@ the CPU number which contains the most up to date VFP context.
+	str	r11, [r10, #VFP_CPU]
+
+	VFPFMXR	FPEXC, r5		@ enable VFP, disable any pending
+					@ exceptions, so we can get at the
+					@ rest of it
 #endif
 
-no_old_VFP_process:
 	DBGSTR1	"load state %p", r10
-	str	r10, [r3, r11, lsl #2]	@ update the last_VFP_context pointer
+	str	r10, [r3, r11, lsl #2]	@ update the vfp_current_hw_state pointer
 					@ Load the saved state back into the VFP
 	VFPFLDMIA r10, r5		@ reload the working registers while
 					@ FPEXC is in a safe state
@@ -132,7 +154,8 @@ no_old_VFP_process:
 #endif
 	VFPFMXR	FPSCR, r5		@ restore status
 
-check_for_exception:
+@ The context stored in the VFP hardware is up to date with this thread
+vfp_hw_state_valid:
 	tst	r1, #FPEXC_EX
 	bne	process_exception	@ might as well handle the pending
 					@ exception before retrying branch
@@ -207,8 +230,8 @@ ENTRY(vfp_save_state)
 ENDPROC(vfp_save_state)
 
 	.align
-last_VFP_context_address:
-	.word	last_VFP_context
+vfp_current_hw_state_address:
+	.word	vfp_current_hw_state
 
 	.macro	tbl_branch, base, tmp, shift
 #ifdef CONFIG_THUMB2_KERNEL
diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index 650d90be0f9..79bcb431693 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -33,7 +33,6 @@ void vfp_support_entry(void);
 void vfp_null_entry(void);
 
 void (*vfp_vector)(void) = vfp_null_entry;
-union vfp_state *last_VFP_context[NR_CPUS];
 
 /*
  * Dual-use variable.
@@ -43,6 +42,46 @@ union vfp_state *last_VFP_context[NR_CPUS];
 unsigned int VFP_arch;
 
 /*
+ * The pointer to the vfpstate structure of the thread which currently
+ * owns the context held in the VFP hardware, or NULL if the hardware
+ * context is invalid.
+ *
+ * For UP, this is sufficient to tell which thread owns the VFP context.
+ * However, for SMP, we also need to check the CPU number stored in the
+ * saved state too to catch migrations.
+ */
+union vfp_state *vfp_current_hw_state[NR_CPUS];
+
+/*
+ * Is 'thread's most up to date state stored in this CPUs hardware?
+ * Must be called from non-preemptible context.
+ */
+static bool vfp_state_in_hw(unsigned int cpu, struct thread_info *thread)
+{
+#ifdef CONFIG_SMP
+	if (thread->vfpstate.hard.cpu != cpu)
+		return false;
+#endif
+	return vfp_current_hw_state[cpu] == &thread->vfpstate;
+}
+
+/*
+ * Force a reload of the VFP context from the thread structure.  We do
+ * this by ensuring that access to the VFP hardware is disabled, and
+ * clear last_VFP_context.  Must be called from non-preemptible context.
+ */
+static void vfp_force_reload(unsigned int cpu, struct thread_info *thread)
+{
+	if (vfp_state_in_hw(cpu, thread)) {
+		fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_EN);
+		vfp_current_hw_state[cpu] = NULL;
+	}
+#ifdef CONFIG_SMP
+	thread->vfpstate.hard.cpu = NR_CPUS;
+#endif
+}
+
+/*
  * Per-thread VFP initialization.
  */
 static void vfp_thread_flush(struct thread_info *thread)
@@ -50,21 +89,27 @@ static void vfp_thread_flush(struct thread_info *thread)
 	union vfp_state *vfp = &thread->vfpstate;
 	unsigned int cpu;
 
-	memset(vfp, 0, sizeof(union vfp_state));
-
-	vfp->hard.fpexc = FPEXC_EN;
-	vfp->hard.fpscr = FPSCR_ROUND_NEAREST;
-
 	/*
 	 * Disable VFP to ensure we initialize it first.  We must ensure
-	 * that the modification of last_VFP_context[] and hardware disable
-	 * are done for the same CPU and without preemption.
+	 * that the modification of vfp_current_hw_state[] and hardware
+	 * disable are done for the same CPU and without preemption.
+	 *
+	 * Do this first to ensure that preemption won't overwrite our
+	 * state saving should access to the VFP be enabled at this point.
 	 */
 	cpu = get_cpu();
-	if (last_VFP_context[cpu] == vfp)
-		last_VFP_context[cpu] = NULL;
+	if (vfp_current_hw_state[cpu] == vfp)
+		vfp_current_hw_state[cpu] = NULL;
 	fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_EN);
 	put_cpu();
+
+	memset(vfp, 0, sizeof(union vfp_state));
+
+	vfp->hard.fpexc = FPEXC_EN;
+	vfp->hard.fpscr = FPSCR_ROUND_NEAREST;
+#ifdef CONFIG_SMP
+	vfp->hard.cpu = NR_CPUS;
+#endif
 }
 
 static void vfp_thread_exit(struct thread_info *thread)
@@ -73,8 +118,8 @@ static void vfp_thread_exit(struct thread_info *thread)
 	union vfp_state *vfp = &thread->vfpstate;
 	unsigned int cpu = get_cpu();
 
-	if (last_VFP_context[cpu] == vfp)
-		last_VFP_context[cpu] = NULL;
+	if (vfp_current_hw_state[cpu] == vfp)
+		vfp_current_hw_state[cpu] = NULL;
 	put_cpu();
 }
 
@@ -84,6 +129,9 @@ static void vfp_thread_copy(struct thread_info *thread)
 
 	vfp_sync_hwstate(parent);
 	thread->vfpstate = parent->vfpstate;
+#ifdef CONFIG_SMP
+	thread->vfpstate.hard.cpu = NR_CPUS;
+#endif
 }
 
 /*
@@ -129,17 +177,8 @@ static int vfp_notifier(struct notifier_block *self, unsigned long cmd, void *v)
 		 * case the thread migrates to a different CPU. The
 		 * restoring is done lazily.
 		 */
-		if ((fpexc & FPEXC_EN) && last_VFP_context[cpu]) {
-			vfp_save_state(last_VFP_context[cpu], fpexc);
-			last_VFP_context[cpu]->hard.cpu = cpu;
-		}
-		/*
-		 * Thread migration, just force the reloading of the
-		 * state on the new CPU in case the VFP registers
-		 * contain stale data.
-		 */
-		if (thread->vfpstate.hard.cpu != cpu)
-			last_VFP_context[cpu] = NULL;
+		if ((fpexc & FPEXC_EN) && vfp_current_hw_state[cpu])
+			vfp_save_state(vfp_current_hw_state[cpu], fpexc);
 #endif
 
 		/*
@@ -415,7 +454,7 @@ static int vfp_pm_suspend(void)
 	}
 
 	/* clear any information we had about last context state */
-	memset(last_VFP_context, 0, sizeof(last_VFP_context));
+	memset(vfp_current_hw_state, 0, sizeof(vfp_current_hw_state));
 
 	return 0;
 }
@@ -443,15 +482,15 @@ static void vfp_pm_init(void)
 static inline void vfp_pm_init(void) { }
 #endif /* CONFIG_PM */
 
+/*
+ * Ensure that the VFP state stored in 'thread->vfpstate' is up to date
+ * with the hardware state.
+ */
 void vfp_sync_hwstate(struct thread_info *thread)
 {
 	unsigned int cpu = get_cpu();
 
-	/*
-	 * If the thread we're interested in is the current owner of the
-	 * hardware VFP state, then we need to save its state.
-	 */
-	if (last_VFP_context[cpu] == &thread->vfpstate) {
+	if (vfp_state_in_hw(cpu, thread)) {
 		u32 fpexc = fmrx(FPEXC);
 
 		/*
@@ -465,36 +504,13 @@ void vfp_sync_hwstate(struct thread_info *thread)
 	put_cpu();
 }
 
+/* Ensure that the thread reloads the hardware VFP state on the next use. */
 void vfp_flush_hwstate(struct thread_info *thread)
 {
 	unsigned int cpu = get_cpu();
 
-	/*
-	 * If the thread we're interested in is the current owner of the
-	 * hardware VFP state, then we need to save its state.
-	 */
-	if (last_VFP_context[cpu] == &thread->vfpstate) {
-		u32 fpexc = fmrx(FPEXC);
-
-		fmxr(FPEXC, fpexc & ~FPEXC_EN);
-
-		/*
-		 * Set the context to NULL to force a reload the next time
-		 * the thread uses the VFP.
-		 */
-		last_VFP_context[cpu] = NULL;
-	}
+	vfp_force_reload(cpu, thread);
 
-#ifdef CONFIG_SMP
-	/*
-	 * For SMP we still have to take care of the case where the thread
-	 * migrates to another CPU and then back to the original CPU on which
-	 * the last VFP user is still the same thread. Mark the thread VFP
-	 * state as belonging to a non-existent CPU so that the saved one will
-	 * be reloaded in the above case.
-	 */
-	thread->vfpstate.hard.cpu = NR_CPUS;
-#endif
 	put_cpu();
 }
 
@@ -513,8 +529,7 @@ static int vfp_hotplug(struct notifier_block *b, unsigned long action,
 	void *hcpu)
 {
 	if (action == CPU_DYING || action == CPU_DYING_FROZEN) {
-		unsigned int cpu = (long)hcpu;
-		last_VFP_context[cpu] = NULL;
+		vfp_force_reload((long)hcpu, current_thread_info());
 	} else if (action == CPU_STARTING || action == CPU_STARTING_FROZEN)
 		vfp_enable(NULL);
 	return NOTIFY_OK;
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index fe140724a02..50f4f77ed20 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -1063,7 +1063,15 @@ static int __devinit mmci_probe(struct amba_device *dev,
 	}
 
 	mmc->ops = &mmci_ops;
-	mmc->f_min = (host->mclk + 511) / 512;
+	/*
+	 * The ARM and ST versions of the block have slightly different
+	 * clock divider equations which means that the minimum divider
+	 * differs too.
+	 */
+	if (variant->st_clkdiv)
+		mmc->f_min = DIV_ROUND_UP(host->mclk, 257);
+	else
+		mmc->f_min = DIV_ROUND_UP(host->mclk, 512);
 	/*
 	 * If the platform data supplies a maximum operating
 	 * frequency, this takes precedence. Else, we fall back