Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6

52 files changed, 1673 insertions, 539 deletions

diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 09e031c5588..ad522e3d3d8 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -6,6 +6,35 @@ be removed from this file.
 
 ---------------------------
 
+What:	PRISM54
+When:	2.6.34
+
+Why:	prism54 FullMAC PCI / Cardbus devices used to be supported only by the
+	prism54 wireless driver. After Intersil stopped selling these
+	devices in preference for the newer more flexible SoftMAC devices
+	a SoftMAC device driver was required and prism54 did not support
+	them. The p54pci driver now exists and has been present in the kernel for
+	a while. This driver supports both SoftMAC devices and FullMAC devices.
+	The main difference between these devices was the amount of memory which
+	could be used for the firmware. The SoftMAC devices support a smaller
+	amount of memory. Because of this the SoftMAC firmware fits into FullMAC
+	devices's memory. p54pci supports not only PCI / Cardbus but also USB
+	and SPI. Since p54pci supports all devices prism54 supports
+	you will have a conflict. I'm not quite sure how distributions are
+	handling this conflict right now. prism54 was kept around due to
+	claims users may experience issues when using the SoftMAC driver.
+	Time has passed users have not reported issues. If you use prism54
+	and for whatever reason you cannot use p54pci please let us know!
+	E-mail us at: linux-wireless@vger.kernel.org
+
+	For more information see the p54 wiki page:
+
+	http://wireless.kernel.org/en/users/Drivers/p54
+
+Who:	Luis R. Rodriguez <lrodriguez@atheros.com>
+
+---------------------------
+
 What:	IRQF_SAMPLE_RANDOM
 Check:	IRQF_SAMPLE_RANDOM
 When:	July 2009
diff --git a/MAINTAINERS b/MAINTAINERS
index 0ab47e7fc2e..6e2e12fd9ef 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -876,6 +876,7 @@ M:	"Luis R. Rodriguez" <lrodriguez@atheros.com>
 M:	Bob Copeland <me@bobcopeland.com>
 L:	linux-wireless@vger.kernel.org
 L:	ath5k-devel@lists.ath5k.org
+W:	http://wireless.kernel.org/en/users/Drivers/ath5k
 S:	Maintained
 F:	drivers/net/wireless/ath/ath5k/
 
@@ -887,6 +888,7 @@ M:	Vasanthakumar Thiagarajan <vasanth@atheros.com>
 M:	Senthil Balasubramanian <senthilkumar@atheros.com>
 L:	linux-wireless@vger.kernel.org
 L:	ath9k-devel@lists.ath9k.org
+W:	http://wireless.kernel.org/en/users/Drivers/ath9k
 S:	Supported
 F:	drivers/net/wireless/ath/ath9k/
 
diff --git a/drivers/net/b44.c b/drivers/net/b44.c
index 951735c9ec0..0189dcd36f3 100644
--- a/drivers/net/b44.c
+++ b/drivers/net/b44.c
@@ -1303,10 +1303,13 @@ static void b44_chip_reset(struct b44 *bp, int reset_kind)
 		     & MDIO_CTRL_MAXF_MASK)));
 		break;
 	case SSB_BUSTYPE_PCI:
-	case SSB_BUSTYPE_PCMCIA:
 		bw32(bp, B44_MDIO_CTRL, (MDIO_CTRL_PREAMBLE |
 		     (0x0d & MDIO_CTRL_MAXF_MASK)));
 		break;
+	case SSB_BUSTYPE_PCMCIA:
+	case SSB_BUSTYPE_SDIO:
+		WARN_ON(1); /* A device with this bus does not exist. */
+		break;
 	}
 
 	br32(bp, B44_MDIO_CTRL);
@@ -1764,10 +1767,13 @@ static void b44_get_drvinfo (struct net_device *dev, struct ethtool_drvinfo *inf
 	case SSB_BUSTYPE_PCI:
 		strlcpy(info->bus_info, pci_name(bus->host_pci), sizeof(info->bus_info));
 		break;
-	case SSB_BUSTYPE_PCMCIA:
 	case SSB_BUSTYPE_SSB:
 		strlcpy(info->bus_info, "SSB", sizeof(info->bus_info));
 		break;
+	case SSB_BUSTYPE_PCMCIA:
+	case SSB_BUSTYPE_SDIO:
+		WARN_ON(1); /* A device with this bus does not exist. */
+		break;
 	}
 }
 
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index a8871a84d87..ad89d23968d 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -275,51 +275,26 @@ config PCMCIA_WL3501
 	 micro support for ethtool.
 
 config PRISM54
-	tristate 'Intersil Prism GT/Duette/Indigo PCI/Cardbus' 
+	tristate 'Intersil Prism GT/Duette/Indigo PCI/Cardbus (DEPRECATED)'
 	depends on PCI && EXPERIMENTAL && WLAN_80211
 	select WIRELESS_EXT
 	select FW_LOADER
 	---help---
-	  Enable PCI and Cardbus support for the following chipset based cards:
-
-	  ISL3880 - Prism GT            802.11 b/g
-	  ISL3877 - Prism Indigo        802.11 a
-	  ISL3890 - Prism Duette        802.11 a/b/g
-	  
-	  For a complete list of supported cards visit <http://prism54.org>.
-	  Here is the latest confirmed list of supported cards:
-
-	  3com OfficeConnect 11g Cardbus Card aka 3CRWE154G72 (version 1)
-	  Allnet ALL0271 PCI Card
-	  Compex WL54G Cardbus Card
-	  Corega CG-WLCB54GT Cardbus Card
-	  D-Link Air Plus Xtreme G A1 Cardbus Card aka DWL-g650
-	  I-O Data WN-G54/CB Cardbus Card
-	  Kobishi XG-300 aka Z-Com Cardbus Card
-	  Netgear WG511 Cardbus Card
-	  Ovislink WL-5400PCI PCI Card
-	  Peabird WLG-PCI PCI Card
-	  Sitecom WL-100i Cardbus Card
-	  Sitecom WL-110i PCI Card
-	  SMC2802W -    EZ Connect g 2.4GHz 54 Mbps Wireless PCI Card
-	  SMC2835W -    EZ Connect g 2.4GHz 54 Mbps Wireless Cardbus Card
-	  SMC2835W-V2 - EZ Connect g 2.4GHz 54 Mbps Wireless Cardbus Card
-	  Z-Com XG-900 PCI Card
-	  Zyxel G-100 Cardbus Card
-
-	  If you enable this you will need a firmware file as well.
-	  You will need to copy this to /usr/lib/hotplug/firmware/isl3890.
-	  You can get this non-GPL'd firmware file from the Prism54 project page:
-	  <http://prism54.org>
-	  You will also need the /etc/hotplug/firmware.agent script from
-	  a current hotplug package.
-
-	  Note: You need a motherboard with DMA support to use any of these cards 
-	  
-	  If you want to compile the driver as a module ( = code which can be
-	  inserted in and removed from the running kernel whenever you want),
-	  say M here and read <file:Documentation/kbuild/modules.txt>.
-	  The module will be called prism54.
+	  This enables support for FullMAC PCI/Cardbus prism54 devices. This
+	  driver is now deprecated in favor for the SoftMAC driver, p54pci.
+	  p54pci supports FullMAC PCI/Cardbus devices as well. For details on
+	  the scheduled removal of this driver on the kernel see the feature
+	  removal schedule:
+
+	  Documentation/feature-removal-schedule.txt
+
+	  For more information refer to the p54 wiki:
+
+	  http://wireless.kernel.org/en/users/Drivers/p54
+
+	  Note: You need a motherboard with DMA support to use any of these cards
+
+	  When built as module you get the module prism54
 
 config USB_ZD1201
 	tristate "USB ZD1201 based Wireless device support"
diff --git a/drivers/net/wireless/ath/ar9170/phy.c b/drivers/net/wireless/ath/ar9170/phy.c
index df86f70cd81..b3e5cf3735b 100644
--- a/drivers/net/wireless/ath/ar9170/phy.c
+++ b/drivers/net/wireless/ath/ar9170/phy.c
@@ -396,6 +396,136 @@ static struct ar9170_phy_init ar5416_phy_init[] = {
 	{ 0x1c9384, 0xf3307ff0, 0xf3307ff0, 0xf3307ff0, 0xf3307ff0, }
 };
 
+/*
+ * look up a certain register in ar5416_phy_init[] and return the init. value
+ * for the band and bandwidth given. Return 0 if register address not found.
+ */
+static u32 ar9170_get_default_phy_reg_val(u32 reg, bool is_2ghz, bool is_40mhz)
+{
+	unsigned int i;
+	for (i = 0; i < ARRAY_SIZE(ar5416_phy_init); i++) {
+		if (ar5416_phy_init[i].reg != reg)
+			continue;
+
+		if (is_2ghz) {
+			if (is_40mhz)
+				return ar5416_phy_init[i]._2ghz_40;
+			else
+				return ar5416_phy_init[i]._2ghz_20;
+		} else {
+			if (is_40mhz)
+				return ar5416_phy_init[i]._5ghz_40;
+			else
+				return ar5416_phy_init[i]._5ghz_20;
+		}
+	}
+	return 0;
+}
+
+/*
+ * initialize some phy regs from eeprom values in modal_header[]
+ * acc. to band and bandwith
+ */
+static int ar9170_init_phy_from_eeprom(struct ar9170 *ar,
+				bool is_2ghz, bool is_40mhz)
+{
+	static const u8 xpd2pd[16] = {
+		0x2, 0x2, 0x2, 0x1, 0x2, 0x2, 0x6, 0x2,
+		0x2, 0x3, 0x7, 0x2, 0xB, 0x2, 0x2, 0x2
+	};
+	u32 defval, newval;
+	/* pointer to the modal_header acc. to band */
+	struct ar9170_eeprom_modal *m = &ar->eeprom.modal_header[is_2ghz];
+
+	ar9170_regwrite_begin(ar);
+
+	/* ant common control (index 0) */
+	newval = le32_to_cpu(m->antCtrlCommon);
+	ar9170_regwrite(0x1c5964, newval);
+
+	/* ant control chain 0 (index 1) */
+	newval = le32_to_cpu(m->antCtrlChain[0]);
+	ar9170_regwrite(0x1c5960, newval);
+
+	/* ant control chain 2 (index 2) */
+	newval = le32_to_cpu(m->antCtrlChain[1]);
+	ar9170_regwrite(0x1c7960, newval);
+
+	/* SwSettle (index 3) */
+	if (!is_40mhz) {
+		defval = ar9170_get_default_phy_reg_val(0x1c5844,
+							is_2ghz, is_40mhz);
+		newval = (defval & ~0x3f80) |
+			((m->switchSettling & 0x7f) << 7);
+		ar9170_regwrite(0x1c5844, newval);
+	}
+
+	/* adcDesired, pdaDesired (index 4) */
+	defval = ar9170_get_default_phy_reg_val(0x1c5850, is_2ghz, is_40mhz);
+	newval = (defval & ~0xffff) | ((u8)m->pgaDesiredSize << 8) |
+		((u8)m->adcDesiredSize);
+	ar9170_regwrite(0x1c5850, newval);
+
+	/* TxEndToXpaOff, TxFrameToXpaOn (index 5) */
+	defval = ar9170_get_default_phy_reg_val(0x1c5834, is_2ghz, is_40mhz);
+	newval = (m->txEndToXpaOff << 24) | (m->txEndToXpaOff << 16) |
+		(m->txFrameToXpaOn << 8) | m->txFrameToXpaOn;
+	ar9170_regwrite(0x1c5834, newval);
+
+	/* TxEndToRxOn (index 6) */
+	defval = ar9170_get_default_phy_reg_val(0x1c5828, is_2ghz, is_40mhz);
+	newval = (defval & ~0xff0000) | (m->txEndToRxOn << 16);
+	ar9170_regwrite(0x1c5828, newval);
+
+	/* thresh62 (index 7) */
+	defval = ar9170_get_default_phy_reg_val(0x1c8864, is_2ghz, is_40mhz);
+	newval = (defval & ~0x7f000) | (m->thresh62 << 12);
+	ar9170_regwrite(0x1c8864, newval);
+
+	/* tx/rx attenuation chain 0 (index 8) */
+	defval = ar9170_get_default_phy_reg_val(0x1c5848, is_2ghz, is_40mhz);
+	newval = (defval & ~0x3f000) | ((m->txRxAttenCh[0] & 0x3f) << 12);
+	ar9170_regwrite(0x1c5848, newval);
+
+	/* tx/rx attenuation chain 2 (index 9) */
+	defval = ar9170_get_default_phy_reg_val(0x1c7848, is_2ghz, is_40mhz);
+	newval = (defval & ~0x3f000) | ((m->txRxAttenCh[1] & 0x3f) << 12);
+	ar9170_regwrite(0x1c7848, newval);
+
+	/* tx/rx margin chain 0 (index 10) */
+	defval = ar9170_get_default_phy_reg_val(0x1c620c, is_2ghz, is_40mhz);
+	newval = (defval & ~0xfc0000) | ((m->rxTxMarginCh[0] & 0x3f) << 18);
+	/* bsw margin chain 0 for 5GHz only */
+	if (!is_2ghz)
+		newval = (newval & ~0x3c00) | ((m->bswMargin[0] & 0xf) << 10);
+	ar9170_regwrite(0x1c620c, newval);
+
+	/* tx/rx margin chain 2 (index 11) */
+	defval = ar9170_get_default_phy_reg_val(0x1c820c, is_2ghz, is_40mhz);
+	newval = (defval & ~0xfc0000) | ((m->rxTxMarginCh[1] & 0x3f) << 18);
+	ar9170_regwrite(0x1c820c, newval);
+
+	/* iqCall, iqCallq chain 0 (index 12) */
+	defval = ar9170_get_default_phy_reg_val(0x1c5920, is_2ghz, is_40mhz);
+	newval = (defval & ~0x7ff) | (((u8)m->iqCalICh[0] & 0x3f) << 5) |
+		((u8)m->iqCalQCh[0] & 0x1f);
+	ar9170_regwrite(0x1c5920, newval);
+
+	/* iqCall, iqCallq chain 2 (index 13) */
+	defval = ar9170_get_default_phy_reg_val(0x1c7920, is_2ghz, is_40mhz);
+	newval = (defval & ~0x7ff) | (((u8)m->iqCalICh[1] & 0x3f) << 5) |
+		((u8)m->iqCalQCh[1] & 0x1f);
+	ar9170_regwrite(0x1c7920, newval);
+
+	/* xpd gain mask (index 14) */
+	defval = ar9170_get_default_phy_reg_val(0x1c6258, is_2ghz, is_40mhz);
+	newval = (defval & ~0xf0000) | (xpd2pd[m->xpdGain & 0xf] << 16);
+	ar9170_regwrite(0x1c6258, newval);
+	ar9170_regwrite_finish();
+
+	return ar9170_regwrite_result();
+}
+
 int ar9170_init_phy(struct ar9170 *ar, enum ieee80211_band band)
 {
 	int i, err;
@@ -426,7 +556,9 @@ int ar9170_init_phy(struct ar9170 *ar, enum ieee80211_band band)
 	if (err)
 		return err;
 
-	/* XXX: use EEPROM data here! */
+	err = ar9170_init_phy_from_eeprom(ar, is_2ghz, is_40mhz);
+	if (err)
+		return err;
 
 	err = ar9170_init_power_cal(ar);
 	if (err)
@@ -987,6 +1119,282 @@ static u8 ar9170_interpolate_u8(u8 x, u8 x1, u8 y1, u8 x2, u8 y2)
 #undef SHIFT
 }
 
+static u8 ar9170_interpolate_val(u8 x, u8 *x_array, u8 *y_array)
+{
+	int i;
+
+	for (i = 0; i < 3; i++)
+		if (x <= x_array[i + 1])
+			break;
+
+	return ar9170_interpolate_u8(x,
+				     x_array[i],
+				     y_array[i],
+				     x_array[i + 1],
+				     y_array[i + 1]);
+}
+
+static int ar9170_set_freq_cal_data(struct ar9170 *ar,
+				    struct ieee80211_channel *channel)
+{
+	u8 *cal_freq_pier;
+	u8 vpds[2][AR5416_PD_GAIN_ICEPTS];
+	u8 pwrs[2][AR5416_PD_GAIN_ICEPTS];
+	int chain, idx, i;
+	u8 f;
+
+	switch (channel->band) {
+	case IEEE80211_BAND_2GHZ:
+		f = channel->center_freq - 2300;
+		cal_freq_pier = ar->eeprom.cal_freq_pier_2G;
+		i = AR5416_NUM_2G_CAL_PIERS - 1;
+		break;
+
+	case IEEE80211_BAND_5GHZ:
+		f = (channel->center_freq - 4800) / 5;
+		cal_freq_pier = ar->eeprom.cal_freq_pier_5G;
+		i = AR5416_NUM_5G_CAL_PIERS - 1;
+		break;
+
+	default:
+		return -EINVAL;
+		break;
+	}
+
+	for (; i >= 0; i--) {
+		if (cal_freq_pier[i] != 0xff)
+			break;
+	}
+	if (i < 0)
+		return -EINVAL;
+
+	idx = ar9170_find_freq_idx(i, cal_freq_pier, f);
+
+	ar9170_regwrite_begin(ar);
+
+	for (chain = 0; chain < AR5416_MAX_CHAINS; chain++) {
+		for (i = 0; i < AR5416_PD_GAIN_ICEPTS; i++) {
+			struct ar9170_calibration_data_per_freq *cal_pier_data;
+			int j;
+
+			switch (channel->band) {
+			case IEEE80211_BAND_2GHZ:
+				cal_pier_data = &ar->eeprom.
+					cal_pier_data_2G[chain][idx];
+				break;
+
+			case IEEE80211_BAND_5GHZ:
+				cal_pier_data = &ar->eeprom.
+					cal_pier_data_5G[chain][idx];
+				break;
+
+			default:
+				return -EINVAL;
+			}
+
+			for (j = 0; j < 2; j++) {
+				vpds[j][i] = ar9170_interpolate_u8(f,
+					cal_freq_pier[idx],
+					cal_pier_data->vpd_pdg[j][i],
+					cal_freq_pier[idx + 1],
+					cal_pier_data[1].vpd_pdg[j][i]);
+
+				pwrs[j][i] = ar9170_interpolate_u8(f,
+					cal_freq_pier[idx],
+					cal_pier_data->pwr_pdg[j][i],
+					cal_freq_pier[idx + 1],
+					cal_pier_data[1].pwr_pdg[j][i]) / 2;
+			}
+		}
+
+		for (i = 0; i < 76; i++) {
+			u32 phy_data;
+			u8 tmp;
+
+			if (i < 25) {
+				tmp = ar9170_interpolate_val(i, &pwrs[0][0],
+							     &vpds[0][0]);
+			} else {
+				tmp = ar9170_interpolate_val(i - 12,
+							     &pwrs[1][0],
+							     &vpds[1][0]);
+			}
+
+			phy_data |= tmp << ((i & 3) << 3);
+			if ((i & 3) == 3) {
+				ar9170_regwrite(0x1c6280 + chain * 0x1000 +
+						(i & ~3), phy_data);
+				phy_data = 0;
+			}
+		}
+
+		for (i = 19; i < 32; i++)
+			ar9170_regwrite(0x1c6280 + chain * 0x1000 + (i << 2),
+					0x0);
+	}
+
+	ar9170_regwrite_finish();
+	return ar9170_regwrite_result();
+}
+
+static u8 ar9170_get_max_edge_power(struct ar9170 *ar,
+				    struct ar9170_calctl_edges edges[],
+				    u32 freq)
+{
+/* TODO: move somewhere else */
+#define AR5416_MAX_RATE_POWER        63
+
+	int i;
+	u8 rc = AR5416_MAX_RATE_POWER;
+	u8 f;
+	if (freq < 3000)
+		f = freq - 2300;
+	else
+		f = (freq - 4800) / 5;
+
+	for (i = 0; i < AR5416_NUM_BAND_EDGES; i++) {
+		if (edges[i].channel == 0xff)
+			break;
+		if (f == edges[i].channel) {
+			/* exact freq match */
+			rc = edges[i].power_flags & ~AR9170_CALCTL_EDGE_FLAGS;
+			break;
+		}
+		if (i > 0 && f < edges[i].channel) {
+			if (f > edges[i-1].channel &&
+			    edges[i-1].power_flags & AR9170_CALCTL_EDGE_FLAGS) {
+				/* lower channel has the inband flag set */
+				rc = edges[i-1].power_flags &
+					~AR9170_CALCTL_EDGE_FLAGS;
+			}
+			break;
+		}
+	}
+
+	if (i == AR5416_NUM_BAND_EDGES) {
+		if (f > edges[i-1].channel &&
+		    edges[i-1].power_flags & AR9170_CALCTL_EDGE_FLAGS) {
+			/* lower channel has the inband flag set */
+			rc = edges[i-1].power_flags &
+				~AR9170_CALCTL_EDGE_FLAGS;
+		}
+	}
+	return rc;
+}
+
+/* calculate the conformance test limits and apply them to ar->power*
+ * (derived from otus hal/hpmain.c, line 3706 ff.)
+ */
+static void ar9170_calc_ctl(struct ar9170 *ar, u32 freq, enum ar9170_bw bw)
+{
+	u8 ctl_grp; /* CTL group */
+	u8 ctl_idx; /* CTL index */
+	int i, j;
+	struct ctl_modes {
+		u8 ctl_mode;
+		u8 max_power;
+		u8 *pwr_cal_data;
+		int pwr_cal_len;
+	} *modes;
+
+	/* order is relevant in the mode_list_*: we fall back to the
+	 * lower indices if any mode is missed in the EEPROM.
+	 */
+	struct ctl_modes mode_list_2ghz[] = {
+		{ CTL_11B, 0, ar->power_2G_cck, 4 },
+		{ CTL_11G, 0, ar->power_2G_ofdm, 4 },
+		{ CTL_2GHT20, 0, ar->power_2G_ht20, 8 },
+		{ CTL_2GHT40, 0, ar->power_2G_ht40, 8 },
+	};
+	struct ctl_modes mode_list_5ghz[] = {
+		{ CTL_11A, 0, ar->power_5G_leg, 4 },
+		{ CTL_5GHT20, 0, ar->power_5G_ht20, 8 },
+		{ CTL_5GHT40, 0, ar->power_5G_ht40, 8 },
+	};
+	int nr_modes;
+
+#define EDGES(c, n) (ar->eeprom.ctl_data[c].control_edges[n])
+
+	/* TODO: investigate the differences between OTUS'
+	 * hpreg.c::zfHpGetRegulatoryDomain() and
+	 * ath/regd.c::ath_regd_get_band_ctl() -
+	 * e.g. for FCC3_WORLD the OTUS procedure
+	 * always returns CTL_FCC, while the one in ath/ delivers
+	 * CTL_ETSI for 2GHz and CTL_FCC for 5GHz.
+	 */
+	ctl_grp = ath_regd_get_band_ctl(&ar->common.regulatory,
+					ar->hw->conf.channel->band);
+
+	/* ctl group not found - either invalid band (NO_CTL) or ww roaming */
+	if (ctl_grp == NO_CTL || ctl_grp == SD_NO_CTL)
+		ctl_grp = CTL_FCC;
+
+	if (ctl_grp != CTL_FCC)
+		/* skip CTL and heavy clip for CTL_MKK and CTL_ETSI */
+		return;
+
+	if (ar->hw->conf.channel->band == IEEE80211_BAND_2GHZ) {
+		modes = mode_list_2ghz;
+		nr_modes = ARRAY_SIZE(mode_list_2ghz);
+	} else {
+		modes = mode_list_5ghz;
+		nr_modes = ARRAY_SIZE(mode_list_5ghz);
+	}
+
+	for (i = 0; i < nr_modes; i++) {
+		u8 c = ctl_grp | modes[i].ctl_mode;
+		for (ctl_idx = 0; ctl_idx < AR5416_NUM_CTLS; ctl_idx++)
+			if (c == ar->eeprom.ctl_index[ctl_idx])
+				break;
+		if (ctl_idx < AR5416_NUM_CTLS) {
+			int f_off = 0;
+
+			/* adjust freq for 40MHz */
+			if (modes[i].ctl_mode == CTL_2GHT40 ||
+			    modes[i].ctl_mode == CTL_5GHT40) {
+				if (bw == AR9170_BW_40_BELOW)
+					f_off = -10;
+				else
+					f_off = 10;
+			}
+
+			modes[i].max_power =
+				ar9170_get_max_edge_power(ar, EDGES(ctl_idx, 1),
+							  freq+f_off);
+
+			/* TODO: check if the regulatory max. power is
+			 *  controlled by cfg80211 for DFS
+			 * (hpmain applies it to max_power itself for DFS freq)
+			 */
+
+		} else {
+			/* Workaround in otus driver, hpmain.c, line 3906:
+			 * if no data for 5GHT20 are found, take the
+			 * legacy 5G value.
+			 * We extend this here to fallback from any other *HT or
+			 * 11G, too.
+			 */
+			int k = i;
+
+			modes[i].max_power = AR5416_MAX_RATE_POWER;
+			while (k-- > 0) {
+				if (modes[k].max_power !=
+				    AR5416_MAX_RATE_POWER) {
+					modes[i].max_power = modes[k].max_power;
+					break;
+				}
+			}
+		}
+
+		/* apply max power to pwr_cal_data (ar->power_*) */
+		for (j = 0; j < modes[i].pwr_cal_len; j++) {
+			modes[i].pwr_cal_data[j] = min(modes[i].pwr_cal_data[j],
+						       modes[i].max_power);
+		}
+	}
+#undef EDGES
+}
+
 static int ar9170_set_power_cal(struct ar9170 *ar, u32 freq, enum ar9170_bw bw)
 {
 	struct ar9170_calibration_target_power_legacy *ctpl;
@@ -1089,6 +1497,12 @@ static int ar9170_set_power_cal(struct ar9170 *ar, u32 freq, enum ar9170_bw bw)
 					ctph[idx + 1].power[n]);
 	}
 
+
+	/* calc. conformance test limits and apply to ar->power*[] */
+	ar9170_calc_ctl(ar, freq, bw);
+
+	/* TODO: (heavy clip) regulatory domain power level fine-tuning. */
+
 	/* set ACK/CTS TX power */
 	ar9170_regwrite_begin(ar);
 
@@ -1207,6 +1621,10 @@ int ar9170_set_channel(struct ar9170 *ar, struct ieee80211_channel *channel,
 	if (err)
 		return err;
 
+	err = ar9170_set_freq_cal_data(ar, channel);
+	if (err)
+		return err;
+
 	err = ar9170_set_power_cal(ar, channel->center_freq, bw);
 	if (err)
 		return err;
diff --git a/drivers/net/wireless/ath/ath9k/ahb.c b/drivers/net/wireless/ath/ath9k/ahb.c
index 5618fc25d52..2ad7d0280f7 100644
--- a/drivers/net/wireless/ath/ath9k/ahb.c
+++ b/drivers/net/wireless/ath/ath9k/ahb.c
@@ -119,17 +119,15 @@ static int ath_ahb_probe(struct platform_device *pdev)
 	sc->bus_ops = &ath_ahb_bus_ops;
 	sc->irq = irq;
 
-	ret = ath_init_device(AR5416_AR9100_DEVID, sc);
-	if (ret != 0) {
-		dev_err(&pdev->dev, "failed to attach device, err=%d\n", ret);
-		ret = -ENODEV;
+	ret = ath_init_device(AR5416_AR9100_DEVID, sc, 0x0);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to initialize device\n");
 		goto err_free_hw;
 	}
 
 	ret = request_irq(irq, ath_isr, IRQF_SHARED, "ath9k", sc);
 	if (ret) {
-		dev_err(&pdev->dev, "request_irq failed, err=%d\n", ret);
-		ret = -EIO;
+		dev_err(&pdev->dev, "request_irq failed\n");
 		goto err_detach;
 	}
 
diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index 1c68a9da22d..1d59f10f68d 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -658,7 +658,7 @@ extern struct ieee80211_ops ath9k_ops;
 
 irqreturn_t ath_isr(int irq, void *dev);
 void ath_cleanup(struct ath_softc *sc);
-int ath_init_device(u16 devid, struct ath_softc *sc);
+int ath_init_device(u16 devid, struct ath_softc *sc, u16 subsysid);
 void ath_detach(struct ath_softc *sc);
 const char *ath_mac_bb_name(u32 mac_bb_version);
 const char *ath_rf_name(u16 rf_version);
diff --git a/drivers/net/wireless/ath/ath9k/btcoex.c b/drivers/net/wireless/ath/ath9k/btcoex.c
index e8bfb01ee78..55f607b7699 100644
--- a/drivers/net/wireless/ath/ath9k/btcoex.c
+++ b/drivers/net/wireless/ath/ath9k/btcoex.c
@@ -19,6 +19,29 @@
 static const struct ath_btcoex_config ath_bt_config = { 0, true, true,
 			ATH_BT_COEX_MODE_SLOTTED, true, true, 2, 5, true };
 
+static const u16 ath_subsysid_tbl[] = {
+	AR9280_COEX2WIRE_SUBSYSID,
+	AT9285_COEX3WIRE_SA_SUBSYSID,
+	AT9285_COEX3WIRE_DA_SUBSYSID
+};
+
+/*
+ * Checks the subsystem id of the device to see if it
+ * supports btcoex
+ */
+bool ath_btcoex_supported(u16 subsysid)
+{
+	int i;
+
+	if (!subsysid)
+		return false;
+
+	for (i = 0; i < ARRAY_SIZE(ath_subsysid_tbl); i++)
+		if (subsysid == ath_subsysid_tbl[i])
+			return true;
+
+	return false;
+}
 
 /*
  * Detects if there is any priority bt traffic
diff --git a/drivers/net/wireless/ath/ath9k/btcoex.h b/drivers/net/wireless/ath/ath9k/btcoex.h
index 45568196c59..297b027fd3c 100644
--- a/drivers/net/wireless/ath/ath9k/btcoex.h
+++ b/drivers/net/wireless/ath/ath9k/btcoex.h
@@ -19,6 +19,7 @@
 
 #define ATH_WLANACTIVE_GPIO	5
 #define ATH_BTACTIVE_GPIO	6
+#define ATH_BTPRIORITY_GPIO	7
 
 #define ATH_BTCOEX_DEF_BT_PERIOD  45
 #define ATH_BTCOEX_DEF_DUTY_CYCLE 55
@@ -79,6 +80,7 @@ struct ath_btcoex_info {
 	struct ath_gen_timer *no_stomp_timer; /*Timer for no BT stomping*/
 };
 
+bool ath_btcoex_supported(u16 subsysid);
 int ath9k_hw_btcoex_init(struct ath_hw *ah);
 void ath9k_hw_btcoex_enable(struct ath_hw *ah);
 void ath9k_hw_btcoex_disable(struct ath_hw *ah);
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 71f27f324ce..b6c6cca0781 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -16,14 +16,11 @@
 
 #include <linux/io.h>
 #include <asm/unaligned.h>
+#include <linux/pci.h>
 
 #include "ath9k.h"
 #include "initvals.h"
 
-static int btcoex_enable;
-module_param(btcoex_enable, bool, 0);
-MODULE_PARM_DESC(btcoex_enable, "Enable Bluetooth coexistence support");
-
 #define ATH9K_CLOCK_RATE_CCK		22
 #define ATH9K_CLOCK_RATE_5GHZ_OFDM	40
 #define ATH9K_CLOCK_RATE_2GHZ_OFDM	44
@@ -3689,14 +3686,17 @@ void ath9k_hw_fill_cap_info(struct ath_hw *ah)
 	pCap->num_antcfg_2ghz =
 		ah->eep_ops->get_num_ant_config(ah, ATH9K_HAL_FREQ_BAND_2GHZ);
 
-	if (AR_SREV_9280_10_OR_LATER(ah) && btcoex_enable) {
+	if (AR_SREV_9280_10_OR_LATER(ah) &&
+	    ath_btcoex_supported(ah->hw_version.subsysid)) {
 		btcoex_info->btactive_gpio = ATH_BTACTIVE_GPIO;
 		btcoex_info->wlanactive_gpio = ATH_WLANACTIVE_GPIO;
 
-		if (AR_SREV_9285(ah))
+		if (AR_SREV_9285(ah)) {
 			btcoex_info->btcoex_scheme = ATH_BTCOEX_CFG_3WIRE;
-		else
+			btcoex_info->btpriority_gpio = ATH_BTPRIORITY_GPIO;
+		} else {
 			btcoex_info->btcoex_scheme = ATH_BTCOEX_CFG_2WIRE;
+		}
 	} else {
 		btcoex_info->btcoex_scheme = ATH_BTCOEX_CFG_NONE;
 	}
@@ -3967,7 +3967,8 @@ void ath9k_hw_setrxfilter(struct ath_hw *ah, u32 bits)
 {
 	u32 phybits;
 
-	REG_WRITE(ah, AR_RX_FILTER, (bits & 0xffff) | AR_RX_COMPR_BAR);
+	REG_WRITE(ah, AR_RX_FILTER, bits);
+
 	phybits = 0;
 	if (bits & ATH9K_RX_FILTER_PHYRADAR)
 		phybits |= AR_PHY_ERR_RADAR;
@@ -4297,3 +4298,16 @@ void ath_gen_timer_isr(struct ath_hw *ah)
 		timer->trigger(timer->arg);
 	}
 }
+
+/*
+ * Primitive to disable ASPM
+ */
+void ath_pcie_aspm_disable(struct ath_softc *sc)
+{
+	struct pci_dev *pdev = to_pci_dev(sc->dev);
+	u8 aspm;
+
+	pci_read_config_byte(pdev, ATH_PCIE_CAP_LINK_CTRL, &aspm);
+	aspm &= ~(ATH_PCIE_CAP_LINK_L0S | ATH_PCIE_CAP_LINK_L1);
+	pci_write_config_byte(pdev, ATH_PCIE_CAP_LINK_CTRL, aspm);
+}
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index 5ca6ffa7091..9106a0b537d 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -45,6 +45,10 @@
 #define AR5416_DEVID_AR9287_PCI  0x002D
 #define AR5416_DEVID_AR9287_PCIE 0x002E
 
+#define AR9280_COEX2WIRE_SUBSYSID	0x309b
+#define AT9285_COEX3WIRE_SA_SUBSYSID	0x30aa
+#define AT9285_COEX3WIRE_DA_SUBSYSID	0x30ab
+
 /* Register read/write primitives */
 #define REG_WRITE(_ah, _reg, _val) ath9k_iowrite32((_ah), (_reg), (_val))
 #define REG_READ(_ah, _reg) ath9k_ioread32((_ah), (_reg))
@@ -390,6 +394,7 @@ struct ath9k_hw_version {
 	u16 phyRev;
 	u16 analog5GhzRev;
 	u16 analog2GhzRev;
+	u16 subsysid;
 };
 
 /* Generic TSF timer definitions */
@@ -665,4 +670,9 @@ void ath_gen_timer_free(struct ath_hw *ah, struct ath_gen_timer *timer);
 void ath_gen_timer_isr(struct ath_hw *hw);
 u32 ath9k_hw_gettsf32(struct ath_hw *ah);
 
+#define ATH_PCIE_CAP_LINK_CTRL	0x70
+#define ATH_PCIE_CAP_LINK_L0S	1
+#define ATH_PCIE_CAP_LINK_L1	2
+
+void ath_pcie_aspm_disable(struct ath_softc *sc);
 #endif
diff --git a/drivers/net/wireless/ath/ath9k/mac.h b/drivers/net/wireless/ath/ath9k/mac.h
index 7b3982295a4..f56e77da6c3 100644
--- a/drivers/net/wireless/ath/ath9k/mac.h
+++ b/drivers/net/wireless/ath/ath9k/mac.h
@@ -568,6 +568,7 @@ enum ath9k_rx_filter {
 	ATH9K_RX_FILTER_PROBEREQ = 0x00000080,
 	ATH9K_RX_FILTER_PHYERR = 0x00000100,
 	ATH9K_RX_FILTER_MYBEACON = 0x00000200,
+	ATH9K_RX_FILTER_COMP_BAR = 0x00000400,
 	ATH9K_RX_FILTER_PSPOLL = 0x00004000,
 	ATH9K_RX_FILTER_PHYRADAR = 0x00002000,
 	ATH9K_RX_FILTER_MCAST_BCAST_ALL = 0x00008000,
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index c2efdf2d72d..3dc7b5a13e6 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -1310,7 +1310,7 @@ static int ath9k_reg_notifier(struct wiphy *wiphy,
  * to allow the separation between hardware specific
  * variables (now in ath_hw) and driver specific variables.
  */
-static int ath_init_softc(u16 devid, struct ath_softc *sc)
+static int ath_init_softc(u16 devid, struct ath_softc *sc, u16 subsysid)
 {
 	struct ath_hw *ah = NULL;
 	int r = 0, i;
@@ -1348,6 +1348,7 @@ static int ath_init_softc(u16 devid, struct ath_softc *sc)
 
 	ah->ah_sc = sc;
 	ah->hw_version.devid = devid;
+	ah->hw_version.subsysid = subsysid;
 	sc->sc_ah = ah;
 
 	r = ath9k_hw_init(ah);
@@ -1577,7 +1578,7 @@ void ath_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
 }
 
 /* Device driver core initialization */
-int ath_init_device(u16 devid, struct ath_softc *sc)
+int ath_init_device(u16 devid, struct ath_softc *sc, u16 subsysid)
 {
 	struct ieee80211_hw *hw = sc->hw;
 	int error = 0, i;
@@ -1585,7 +1586,7 @@ int ath_init_device(u16 devid, struct ath_softc *sc)
 
 	DPRINTF(sc, ATH_DBG_CONFIG, "Attach ATH hw\n");
 
-	error = ath_init_softc(devid, sc);
+	error = ath_init_softc(devid, sc, subsysid);
 	if (error != 0)
 		return error;
 
@@ -1879,7 +1880,7 @@ void ath9k_update_ichannel(struct ath_softc *sc, struct ieee80211_hw *hw,
 
 	if (chan->band == IEEE80211_BAND_2GHZ) {
 		ichan->chanmode = CHANNEL_G;
-		ichan->channelFlags = CHANNEL_2GHZ | CHANNEL_OFDM;
+		ichan->channelFlags = CHANNEL_2GHZ | CHANNEL_OFDM | CHANNEL_G;
 	} else {
 		ichan->chanmode = CHANNEL_A;
 		ichan->channelFlags = CHANNEL_5GHZ | CHANNEL_OFDM;
@@ -2010,6 +2011,7 @@ static int ath9k_start(struct ieee80211_hw *hw)
 				      AR_STOMP_LOW_WLAN_WGHT);
 		ath9k_hw_btcoex_enable(sc->sc_ah);
 
+		ath_pcie_aspm_disable(sc);
 		if (sc->btcoex_info.btcoex_scheme == ATH_BTCOEX_CFG_3WIRE)
 			ath_btcoex_timer_resume(sc, &sc->btcoex_info);
 	}
@@ -2433,7 +2435,7 @@ static void ath9k_configure_filter(struct ieee80211_hw *hw,
 	ath9k_hw_setrxfilter(sc->sc_ah, rfilt);
 	ath9k_ps_restore(sc);
 
-	DPRINTF(sc, ATH_DBG_CONFIG, "Set HW RX filter: 0x%x\n", sc->rx.rxfilter);
+	DPRINTF(sc, ATH_DBG_CONFIG, "Set HW RX filter: 0x%x\n", rfilt);
 }
 
 static void ath9k_sta_notify(struct ieee80211_hw *hw,
diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c
index 685a8cebb46..903dd8ad9d4 100644
--- a/drivers/net/wireless/ath/ath9k/pci.c
+++ b/drivers/net/wireless/ath/ath9k/pci.c
@@ -35,8 +35,7 @@ static void ath_pci_read_cachesize(struct ath_softc *sc, int *csz)
 {
 	u8 u8tmp;
 
-	pci_read_config_byte(to_pci_dev(sc->dev), PCI_CACHE_LINE_SIZE,
-			     (u8 *)&u8tmp);
+	pci_read_config_byte(to_pci_dev(sc->dev), PCI_CACHE_LINE_SIZE, &u8tmp);
 	*csz = (int)u8tmp;
 
 	/*
@@ -89,6 +88,7 @@ static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	struct ath_softc *sc;
 	struct ieee80211_hw *hw;
 	u8 csz;
+	u16 subsysid;
 	u32 val;
 	int ret = 0;
 	struct ath_hw *ah;
@@ -160,8 +160,9 @@ static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	hw = ieee80211_alloc_hw(sizeof(struct ath_wiphy) +
 				sizeof(struct ath_softc), &ath9k_ops);
-	if (hw == NULL) {
-		printk(KERN_ERR "ath_pci: no memory for ieee80211_hw\n");
+	if (!hw) {
+		dev_err(&pdev->dev, "no memory for ieee80211_hw\n");
+		ret = -ENOMEM;
 		goto bad2;
 	}
 
@@ -178,17 +179,18 @@ static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	sc->mem = mem;
 	sc->bus_ops = &ath_pci_bus_ops;
 
-	if (ath_init_device(id->device, sc) != 0) {
-		ret = -ENODEV;
+	pci_read_config_word(pdev, PCI_SUBSYSTEM_ID, &subsysid);
+	ret = ath_init_device(id->device, sc, subsysid);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to initialize device\n");
 		goto bad3;
 	}
 
 	/* setup interrupt service routine */
 
-	if (request_irq(pdev->irq, ath_isr, IRQF_SHARED, "ath", sc)) {
-		printk(KERN_ERR "%s: request_irq failed\n",
-			wiphy_name(hw->wiphy));
-		ret = -EIO;
+	ret = request_irq(pdev->irq, ath_isr, IRQF_SHARED, "ath9k", sc);
+	if (ret) {
+		dev_err(&pdev->dev, "request_irq failed\n");
 		goto bad4;
 	}
 
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index 52e62daad3c..ec0abf82399 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -423,6 +423,9 @@ u32 ath_calcrxfilter(struct ath_softc *sc)
 	if (sc->rx.rxfilter & FIF_PSPOLL)
 		rfilt |= ATH9K_RX_FILTER_PSPOLL;
 
+	if (conf_is_ht(&sc->hw->conf))
+		rfilt |= ATH9K_RX_FILTER_COMP_BAR;
+
 	if (sc->sec_wiphy || (sc->rx.rxfilter & FIF_OTHER_BSS)) {
 		/* TODO: only needed if more than one BSSID is in use in
 		 * station/adhoc mode */
diff --git a/drivers/net/wireless/ath/ath9k/reg.h b/drivers/net/wireless/ath/ath9k/reg.h
index 3ddb243f000..e5c29eb86e8 100644
--- a/drivers/net/wireless/ath/ath9k/reg.h
+++ b/drivers/net/wireless/ath/ath9k/reg.h
@@ -1325,7 +1325,6 @@ enum {
 #define AR_CFP_VAL          0x0000FFFF
 
 #define AR_RX_FILTER        0x803C
-#define AR_RX_COMPR_BAR     0x00000400
 
 #define AR_MCAST_FIL0       0x8040
 #define AR_MCAST_FIL1       0x8044
diff --git a/drivers/net/wireless/ath/regd.h b/drivers/net/wireless/ath/regd.h
index 4d3c53674e5..c1dd857697a 100644
--- a/drivers/net/wireless/ath/regd.h
+++ b/drivers/net/wireless/ath/regd.h
@@ -22,6 +22,12 @@
 
 #include "ath.h"
 
+enum ctl_group {
+	CTL_FCC = 0x10,
+	CTL_MKK = 0x40,
+	CTL_ETSI = 0x30,
+};
+
 #define NO_CTL 0xff
 #define SD_NO_CTL               0xE0
 #define NO_CTL                  0xff
diff --git a/drivers/net/wireless/ath/regd_common.h b/drivers/net/wireless/ath/regd_common.h
index ad6d938d3cf..9847af72208 100644
--- a/drivers/net/wireless/ath/regd_common.h
+++ b/drivers/net/wireless/ath/regd_common.h
@@ -154,12 +154,6 @@ enum EnumRd {
 	DEBUG_REG_DMN = 0x01ff,
 };
 
-enum ctl_group {
-	CTL_FCC = 0x10,
-	CTL_MKK = 0x40,
-	CTL_ETSI = 0x30,
-};
-
 /* Regpair to CTL band mapping */
 static struct reg_dmn_pair_mapping regDomainPairs[] = {
 	/* regpair, 5 GHz CTL, 2 GHz CTL */
diff --git a/drivers/net/wireless/b43/Kconfig b/drivers/net/wireless/b43/Kconfig
index 2af3b352232..83e38134acc 100644
--- a/drivers/net/wireless/b43/Kconfig
+++ b/drivers/net/wireless/b43/Kconfig
@@ -42,8 +42,8 @@ config B43_PCICORE_AUTOSELECT
 	default y
 
 config B43_PCMCIA
-	bool "Broadcom 43xx PCMCIA device support (EXPERIMENTAL)"
-	depends on B43 && SSB_PCMCIAHOST_POSSIBLE && EXPERIMENTAL
+	bool "Broadcom 43xx PCMCIA device support"
+	depends on B43 && SSB_PCMCIAHOST_POSSIBLE
 	select SSB_PCMCIAHOST
 	---help---
 	  Broadcom 43xx PCMCIA device support.
diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h
index a1b3b731935..09cfe68537b 100644
--- a/drivers/net/wireless/b43/b43.h
+++ b/drivers/net/wireless/b43/b43.h
@@ -616,6 +616,12 @@ struct b43_wl {
 	/* Pointer to the ieee80211 hardware data structure */
 	struct ieee80211_hw *hw;
 
+	/* Global driver mutex. Every operation must run with this mutex locked. */
+	struct mutex mutex;
+	/* Hard-IRQ spinlock. This lock protects things used in the hard-IRQ
+	 * handler, only. This basically is just the IRQ mask register. */
+	spinlock_t hardirq_lock;
+
 	/* The number of queues that were registered with the mac80211 subsystem
 	 * initially. This is a backup copy of hw->queues in case hw->queues has
 	 * to be dynamically lowered at runtime (Firmware does not support QoS).
@@ -623,16 +629,12 @@ struct b43_wl {
 	 * from the mac80211 subsystem. */
 	u16 mac80211_initially_registered_queues;
 
-	struct mutex mutex;
-	spinlock_t irq_lock;
 	/* R/W lock for data transmission.
 	 * Transmissions on 2+ queues can run concurrently, but somebody else
 	 * might sync with TX by write_lock_irqsave()'ing. */
 	rwlock_t tx_lock;
 	/* Lock for LEDs access. */
 	spinlock_t leds_lock;
-	/* Lock for SHM access. */
-	spinlock_t shm_lock;
 
 	/* We can only have one operating interface (802.11 core)
 	 * at a time. General information about this interface follows.
@@ -665,8 +667,7 @@ struct b43_wl {
 	bool radiotap_enabled;
 	bool radio_enabled;
 
-	/* The beacon we are currently using (AP or IBSS mode).
-	 * This beacon stuff is protected by the irq_lock. */
+	/* The beacon we are currently using (AP or IBSS mode). */
 	struct sk_buff *current_beacon;
 	bool beacon0_uploaded;
 	bool beacon1_uploaded;
@@ -680,6 +681,11 @@ struct b43_wl {
 	 * This is scheduled when we determine that the actual TX output
 	 * power doesn't match what we want. */
 	struct work_struct txpower_adjust_work;
+
+	/* Packet transmit work */
+	struct work_struct tx_work;
+	/* Queue of packets to be transmitted. */
+	struct sk_buff_head tx_queue;
 };
 
 /* The type of the firmware file. */
@@ -754,14 +760,6 @@ enum {
 		smp_wmb();					\
 					} while (0)
 
-/* XXX---   HOW LOCKING WORKS IN B43   ---XXX
- *
- * You should always acquire both, wl->mutex and wl->irq_lock unless:
- * - You don't need to acquire wl->irq_lock, if the interface is stopped.
- * - You don't need to acquire wl->mutex in the IRQ handler, IRQ tasklet
- *   and packet TX path (and _ONLY_ there.)
- */
-
 /* Data structure for one wireless device (802.11 core) */
 struct b43_wldev {
 	struct ssb_device *dev;
@@ -807,14 +805,12 @@ struct b43_wldev {
 	u32 dma_reason[6];
 	/* The currently active generic-interrupt mask. */
 	u32 irq_mask;
+
 	/* Link Quality calculation context. */
 	struct b43_noise_calculation noisecalc;
 	/* if > 0 MAC is suspended. if == 0 MAC is enabled. */
 	int mac_suspended;
 
-	/* Interrupt Service Routine tasklet (bottom-half) */
-	struct tasklet_struct isr_tasklet;
-
 	/* Periodic tasks */
 	struct delayed_work periodic_work;
 	unsigned int periodic_state;
diff --git a/drivers/net/wireless/b43/debugfs.c b/drivers/net/wireless/b43/debugfs.c
index 45e3d6af69f..8f64943e3f6 100644
--- a/drivers/net/wireless/b43/debugfs.c
+++ b/drivers/net/wireless/b43/debugfs.c
@@ -46,8 +46,6 @@ struct b43_debugfs_fops {
 	struct file_operations fops;
 	/* Offset of struct b43_dfs_file in struct b43_dfsentry */
 	size_t file_struct_offset;
-	/* Take wl->irq_lock before calling read/write? */
-	bool take_irqlock;
 };
 
 static inline
@@ -127,7 +125,6 @@ static int shm16write__write_file(struct b43_wldev *dev,
 	unsigned int routing, addr, mask, set;
 	u16 val;
 	int res;
-	unsigned long flags;
 
 	res = sscanf(buf, "0x%X 0x%X 0x%X 0x%X",
 		     &routing, &addr, &mask, &set);
@@ -144,15 +141,13 @@ static int shm16write__write_file(struct b43_wldev *dev,
 	if ((mask > 0xFFFF) || (set > 0xFFFF))
 		return -E2BIG;
 
-	spin_lock_irqsave(&dev->wl->shm_lock, flags);
 	if (mask == 0)
 		val = 0;
 	else
-		val = __b43_shm_read16(dev, routing, addr);
+		val = b43_shm_read16(dev, routing, addr);
 	val &= mask;
 	val |= set;
-	__b43_shm_write16(dev, routing, addr, val);
-	spin_unlock_irqrestore(&dev->wl->shm_lock, flags);
+	b43_shm_write16(dev, routing, addr, val);
 
 	return 0;
 }
@@ -206,7 +201,6 @@ static int shm32write__write_file(struct b43_wldev *dev,
 	unsigned int routing, addr, mask, set;
 	u32 val;
 	int res;
-	unsigned long flags;
 
 	res = sscanf(buf, "0x%X 0x%X 0x%X 0x%X",
 		     &routing, &addr, &mask, &set);
@@ -223,15 +217,13 @@ static int shm32write__write_file(struct b43_wldev *dev,
 	if ((mask > 0xFFFFFFFF) || (set > 0xFFFFFFFF))
 		return -E2BIG;
 
-	spin_lock_irqsave(&dev->wl->shm_lock, flags);
 	if (mask == 0)
 		val = 0;
 	else
-		val = __b43_shm_read32(dev, routing, addr);
+		val = b43_shm_read32(dev, routing, addr);
 	val &= mask;
 	val |= set;
-	__b43_shm_write32(dev, routing, addr, val);
-	spin_unlock_irqrestore(&dev->wl->shm_lock, flags);
+	b43_shm_write32(dev, routing, addr, val);
 
 	return 0;
 }
@@ -372,14 +364,12 @@ static ssize_t txstat_read_file(struct b43_wldev *dev,
 {
 	struct b43_txstatus_log *log = &dev->dfsentry->txstatlog;
 	ssize_t count = 0;
-	unsigned long flags;
 	int i, idx;
 	struct b43_txstatus *stat;
 
-	spin_lock_irqsave(&log->lock, flags);
 	if (log->end < 0) {
 		fappend("Nothing transmitted, yet\n");
-		goto out_unlock;
+		goto out;
 	}
 	fappend("b43 TX status reports:\n\n"
 		"index | cookie | seq | phy_stat | frame_count | "
@@ -409,13 +399,11 @@ static ssize_t txstat_read_file(struct b43_wldev *dev,
 			break;
 		i++;
 	}
-out_unlock:
-	spin_unlock_irqrestore(&log->lock, flags);
+out:
 
 	return count;
 }
 
-/* wl->irq_lock is locked */
 static int restart_write_file(struct b43_wldev *dev,
 			      const char *buf, size_t count)
 {
@@ -556,12 +544,7 @@ static ssize_t b43_debugfs_read(struct file *file, char __user *userbuf,
 			goto out_unlock;
 		}
 		memset(buf, 0, bufsize);
-		if (dfops->take_irqlock) {
-			spin_lock_irq(&dev->wl->irq_lock);
-			ret = dfops->read(dev, buf, bufsize);
-			spin_unlock_irq(&dev->wl->irq_lock);
-		} else
-			ret = dfops->read(dev, buf, bufsize);
+		ret = dfops->read(dev, buf, bufsize);
 		if (ret <= 0) {
 			free_pages((unsigned long)buf, buforder);
 			err = ret;
@@ -623,12 +606,7 @@ static ssize_t b43_debugfs_write(struct file *file,
 		err = -EFAULT;
 		goto out_freepage;
 	}
-	if (dfops->take_irqlock) {
-		spin_lock_irq(&dev->wl->irq_lock);
-		err = dfops->write(dev, buf, count);
-		spin_unlock_irq(&dev->wl->irq_lock);
-	} else
-		err = dfops->write(dev, buf, count);
+	err = dfops->write(dev, buf, count);
 	if (err)
 		goto out_freepage;
 
@@ -641,7 +619,7 @@ out_unlock:
 }
 
 
-#define B43_DEBUGFS_FOPS(name, _read, _write, _take_irqlock)	\
+#define B43_DEBUGFS_FOPS(name, _read, _write)			\
 	static struct b43_debugfs_fops fops_##name = {		\
 		.read	= _read,				\
 		.write	= _write,				\
@@ -652,20 +630,19 @@ out_unlock:
 		},						\
 		.file_struct_offset = offsetof(struct b43_dfsentry, \
 					       file_##name),	\
-		.take_irqlock	= _take_irqlock,		\
 	}
 
-B43_DEBUGFS_FOPS(shm16read, shm16read__read_file, shm16read__write_file, 1);
-B43_DEBUGFS_FOPS(shm16write, NULL, shm16write__write_file, 1);
-B43_DEBUGFS_FOPS(shm32read, shm32read__read_file, shm32read__write_file, 1);
-B43_DEBUGFS_FOPS(shm32write, NULL, shm32write__write_file, 1);
-B43_DEBUGFS_FOPS(mmio16read, mmio16read__read_file, mmio16read__write_file, 1);
-B43_DEBUGFS_FOPS(mmio16write, NULL, mmio16write__write_file, 1);
-B43_DEBUGFS_FOPS(mmio32read, mmio32read__read_file, mmio32read__write_file, 1);
-B43_DEBUGFS_FOPS(mmio32write, NULL, mmio32write__write_file, 1);
-B43_DEBUGFS_FOPS(txstat, txstat_read_file, NULL, 0);
-B43_DEBUGFS_FOPS(restart, NULL, restart_write_file, 1);
-B43_DEBUGFS_FOPS(loctls, loctls_read_file, NULL, 0);
+B43_DEBUGFS_FOPS(shm16read, shm16read__read_file, shm16read__write_file);
+B43_DEBUGFS_FOPS(shm16write, NULL, shm16write__write_file);
+B43_DEBUGFS_FOPS(shm32read, shm32read__read_file, shm32read__write_file);
+B43_DEBUGFS_FOPS(shm32write, NULL, shm32write__write_file);
+B43_DEBUGFS_FOPS(mmio16read, mmio16read__read_file, mmio16read__write_file);
+B43_DEBUGFS_FOPS(mmio16write, NULL, mmio16write__write_file);
+B43_DEBUGFS_FOPS(mmio32read, mmio32read__read_file, mmio32read__write_file);
+B43_DEBUGFS_FOPS(mmio32write, NULL, mmio32write__write_file);
+B43_DEBUGFS_FOPS(txstat, txstat_read_file, NULL);
+B43_DEBUGFS_FOPS(restart, NULL, restart_write_file);
+B43_DEBUGFS_FOPS(loctls, loctls_read_file, NULL);
 
 
 bool b43_debug(struct b43_wldev *dev, enum b43_dyndbg feature)
@@ -738,7 +715,6 @@ void b43_debugfs_add_device(struct b43_wldev *dev)
 		return;
 	}
 	log->end = -1;
-	spin_lock_init(&log->lock);
 
 	dev->dfsentry = e;
 
@@ -822,7 +798,6 @@ void b43_debugfs_remove_device(struct b43_wldev *dev)
 	kfree(e);
 }
 
-/* Called with IRQs disabled. */
 void b43_debugfs_log_txstat(struct b43_wldev *dev,
 			    const struct b43_txstatus *status)
 {
@@ -834,14 +809,12 @@ void b43_debugfs_log_txstat(struct b43_wldev *dev,
 	if (!e)
 		return;
 	log = &e->txstatlog;
-	spin_lock(&log->lock); /* IRQs are already disabled. */
 	i = log->end + 1;
 	if (i == B43_NR_LOGGED_TXSTATUS)
 		i = 0;
 	log->end = i;
 	cur = &(log->log[i]);
 	memcpy(cur, status, sizeof(*cur));
-	spin_unlock(&log->lock);
 }
 
 void b43_debugfs_init(void)
diff --git a/drivers/net/wireless/b43/debugfs.h b/drivers/net/wireless/b43/debugfs.h
index b9d4de4a979..e47b4b488b0 100644
--- a/drivers/net/wireless/b43/debugfs.h
+++ b/drivers/net/wireless/b43/debugfs.h
@@ -23,9 +23,10 @@ struct dentry;
 #define B43_NR_LOGGED_TXSTATUS	100
 
 struct b43_txstatus_log {
+	/* This structure is protected by wl->mutex */
+
 	struct b43_txstatus *log;
 	int end;
-	spinlock_t lock;
 };
 
 struct b43_dfs_file {
diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c
index 289aaf6dfe7..a467ee260a1 100644
--- a/drivers/net/wireless/b43/dma.c
+++ b/drivers/net/wireless/b43/dma.c
@@ -856,7 +856,6 @@ struct b43_dmaring *b43_setup_dmaring(struct b43_wldev *dev,
 		} else
 			B43_WARN_ON(1);
 	}
-	spin_lock_init(&ring->lock);
 #ifdef CONFIG_B43_DEBUG
 	ring->last_injected_overflow = jiffies;
 #endif
@@ -1315,7 +1314,6 @@ int b43_dma_tx(struct b43_wldev *dev, struct sk_buff *skb)
 	struct b43_dmaring *ring;
 	struct ieee80211_hdr *hdr;
 	int err = 0;
-	unsigned long flags;
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 
 	hdr = (struct ieee80211_hdr *)skb->data;
@@ -1331,8 +1329,6 @@ int b43_dma_tx(struct b43_wldev *dev, struct sk_buff *skb)
 			dev, skb_get_queue_mapping(skb));
 	}
 
-	spin_lock_irqsave(&ring->lock, flags);
-
 	B43_WARN_ON(!ring->tx);
 
 	if (unlikely(ring->stopped)) {
@@ -1343,7 +1339,7 @@ int b43_dma_tx(struct b43_wldev *dev, struct sk_buff *skb)
 		if (b43_debug(dev, B43_DBG_DMAVERBOSE))
 			b43err(dev->wl, "Packet after queue stopped\n");
 		err = -ENOSPC;
-		goto out_unlock;
+		goto out;
 	}
 
 	if (unlikely(WARN_ON(free_slots(ring) < TX_SLOTS_PER_FRAME))) {
@@ -1351,7 +1347,7 @@ int b43_dma_tx(struct b43_wldev *dev, struct sk_buff *skb)
 		 * full, but queues not stopped. */
 		b43err(dev->wl, "DMA queue overflow\n");
 		err = -ENOSPC;
-		goto out_unlock;
+		goto out;
 	}
 
 	/* Assign the queue number to the ring (if not already done before)
@@ -1365,11 +1361,11 @@ int b43_dma_tx(struct b43_wldev *dev, struct sk_buff *skb)
 		 * anymore and must not transmit it unencrypted. */
 		dev_kfree_skb_any(skb);
 		err = 0;
-		goto out_unlock;
+		goto out;
 	}
 	if (unlikely(err)) {
 		b43err(dev->wl, "DMA tx mapping failure\n");
-		goto out_unlock;
+		goto out;
 	}
 	ring->nr_tx_packets++;
 	if ((free_slots(ring) < TX_SLOTS_PER_FRAME) ||
@@ -1381,13 +1377,11 @@ int b43_dma_tx(struct b43_wldev *dev, struct sk_buff *skb)
 			b43dbg(dev->wl, "Stopped TX ring %d\n", ring->index);
 		}
 	}
-out_unlock:
-	spin_unlock_irqrestore(&ring->lock, flags);
+out:
 
 	return err;
 }
 
-/* Called with IRQs disabled. */
 void b43_dma_handle_txstatus(struct b43_wldev *dev,
 			     const struct b43_txstatus *status)
 {
@@ -1402,8 +1396,6 @@ void b43_dma_handle_txstatus(struct b43_wldev *dev,
 	if (unlikely(!ring))
 		return;
 
-	spin_lock(&ring->lock); /* IRQs are already disabled. */
-
 	B43_WARN_ON(!ring->tx);
 	ops = ring->ops;
 	while (1) {
@@ -1462,8 +1454,6 @@ void b43_dma_handle_txstatus(struct b43_wldev *dev,
 			b43dbg(dev->wl, "Woke up TX ring %d\n", ring->index);
 		}
 	}
-
-	spin_unlock(&ring->lock);
 }
 
 void b43_dma_get_tx_stats(struct b43_wldev *dev,
@@ -1471,17 +1461,14 @@ void b43_dma_get_tx_stats(struct b43_wldev *dev,
 {
 	const int nr_queues = dev->wl->hw->queues;
 	struct b43_dmaring *ring;
-	unsigned long flags;
 	int i;
 
 	for (i = 0; i < nr_queues; i++) {
 		ring = select_ring_by_priority(dev, i);
 
-		spin_lock_irqsave(&ring->lock, flags);
 		stats[i].len = ring->used_slots / TX_SLOTS_PER_FRAME;
 		stats[i].limit = ring->nr_slots / TX_SLOTS_PER_FRAME;
 		stats[i].count = ring->nr_tx_packets;
-		spin_unlock_irqrestore(&ring->lock, flags);
 	}
 }
 
@@ -1592,22 +1579,14 @@ void b43_dma_rx(struct b43_dmaring *ring)
 
 static void b43_dma_tx_suspend_ring(struct b43_dmaring *ring)
 {
-	unsigned long flags;
-
-	spin_lock_irqsave(&ring->lock, flags);
 	B43_WARN_ON(!ring->tx);
 	ring->ops->tx_suspend(ring);
-	spin_unlock_irqrestore(&ring->lock, flags);
 }
 
 static void b43_dma_tx_resume_ring(struct b43_dmaring *ring)
 {
-	unsigned long flags;
-
-	spin_lock_irqsave(&ring->lock, flags);
 	B43_WARN_ON(!ring->tx);
 	ring->ops->tx_resume(ring);
-	spin_unlock_irqrestore(&ring->lock, flags);
 }
 
 void b43_dma_tx_suspend(struct b43_wldev *dev)
diff --git a/drivers/net/wireless/b43/dma.h b/drivers/net/wireless/b43/dma.h
index 05dde646d83..f0b0838fb5b 100644
--- a/drivers/net/wireless/b43/dma.h
+++ b/drivers/net/wireless/b43/dma.h
@@ -2,7 +2,6 @@
 #define B43_DMA_H_
 
 #include <linux/ieee80211.h>
-#include <linux/spinlock.h>
 
 #include "b43.h"
 
@@ -244,8 +243,6 @@ struct b43_dmaring {
 	/* The QOS priority assigned to this ring. Only used for TX rings.
 	 * This is the mac80211 "queue" value. */
 	u8 queue_prio;
-	/* Lock, only used for TX. */
-	spinlock_t lock;
 	struct b43_wldev *dev;
 #ifdef CONFIG_B43_DEBUG
 	/* Maximum number of used slots. */
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index ae05f667114..7a9a3fa5542 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -291,7 +291,7 @@ static struct ieee80211_supported_band b43_band_2GHz = {
 
 static void b43_wireless_core_exit(struct b43_wldev *dev);
 static int b43_wireless_core_init(struct b43_wldev *dev);
-static void b43_wireless_core_stop(struct b43_wldev *dev);
+static struct b43_wldev * b43_wireless_core_stop(struct b43_wldev *dev);
 static int b43_wireless_core_start(struct b43_wldev *dev);
 
 static int b43_ratelimit(struct b43_wl *wl)
@@ -390,7 +390,7 @@ static inline void b43_shm_control_word(struct b43_wldev *dev,
 	b43_write32(dev, B43_MMIO_SHM_CONTROL, control);
 }
 
-u32 __b43_shm_read32(struct b43_wldev *dev, u16 routing, u16 offset)
+u32 b43_shm_read32(struct b43_wldev *dev, u16 routing, u16 offset)
 {
 	u32 ret;
 
@@ -413,20 +413,7 @@ out:
 	return ret;
 }
 
-u32 b43_shm_read32(struct b43_wldev *dev, u16 routing, u16 offset)
-{
-	struct b43_wl *wl = dev->wl;
-	unsigned long flags;
-	u32 ret;
-
-	spin_lock_irqsave(&wl->shm_lock, flags);
-	ret = __b43_shm_read32(dev, routing, offset);
-	spin_unlock_irqrestore(&wl->shm_lock, flags);
-
-	return ret;
-}
-
-u16 __b43_shm_read16(struct b43_wldev *dev, u16 routing, u16 offset)
+u16 b43_shm_read16(struct b43_wldev *dev, u16 routing, u16 offset)
 {
 	u16 ret;
 
@@ -447,20 +434,7 @@ out:
 	return ret;
 }
 
-u16 b43_shm_read16(struct b43_wldev *dev, u16 routing, u16 offset)
-{
-	struct b43_wl *wl = dev->wl;
-	unsigned long flags;
-	u16 ret;
-
-	spin_lock_irqsave(&wl->shm_lock, flags);
-	ret = __b43_shm_read16(dev, routing, offset);
-	spin_unlock_irqrestore(&wl->shm_lock, flags);
-
-	return ret;
-}
-
-void __b43_shm_write32(struct b43_wldev *dev, u16 routing, u16 offset, u32 value)
+void b43_shm_write32(struct b43_wldev *dev, u16 routing, u16 offset, u32 value)
 {
 	if (routing == B43_SHM_SHARED) {
 		B43_WARN_ON(offset & 0x0001);
@@ -480,17 +454,7 @@ void __b43_shm_write32(struct b43_wldev *dev, u16 routing, u16 offset, u32 value
 	b43_write32(dev, B43_MMIO_SHM_DATA, value);
 }
 
-void b43_shm_write32(struct b43_wldev *dev, u16 routing, u16 offset, u32 value)
-{
-	struct b43_wl *wl = dev->wl;
-	unsigned long flags;
-
-	spin_lock_irqsave(&wl->shm_lock, flags);
-	__b43_shm_write32(dev, routing, offset, value);
-	spin_unlock_irqrestore(&wl->shm_lock, flags);
-}
-
-void __b43_shm_write16(struct b43_wldev *dev, u16 routing, u16 offset, u16 value)
+void b43_shm_write16(struct b43_wldev *dev, u16 routing, u16 offset, u16 value)
 {
 	if (routing == B43_SHM_SHARED) {
 		B43_WARN_ON(offset & 0x0001);
@@ -506,16 +470,6 @@ void __b43_shm_write16(struct b43_wldev *dev, u16 routing, u16 offset, u16 value
 	b43_write16(dev, B43_MMIO_SHM_DATA, value);
 }
 
-void b43_shm_write16(struct b43_wldev *dev, u16 routing, u16 offset, u16 value)
-{
-	struct b43_wl *wl = dev->wl;
-	unsigned long flags;
-
-	spin_lock_irqsave(&wl->shm_lock, flags);
-	__b43_shm_write16(dev, routing, offset, value);
-	spin_unlock_irqrestore(&wl->shm_lock, flags);
-}
-
 /* Read HostFlags */
 u64 b43_hf_read(struct b43_wldev *dev)
 {
@@ -685,22 +639,11 @@ static void b43_short_slot_timing_disable(struct b43_wldev *dev)
 	b43_set_slot_time(dev, 20);
 }
 
-/* Synchronize IRQ top- and bottom-half.
- * IRQs must be masked before calling this.
- * This must not be called with the irq_lock held.
- */
-static void b43_synchronize_irq(struct b43_wldev *dev)
-{
-	synchronize_irq(dev->dev->irq);
-	tasklet_kill(&dev->isr_tasklet);
-}
-
 /* DummyTransmission function, as documented on
  * http://bcm-v4.sipsolutions.net/802.11/DummyTransmission
  */
 void b43_dummy_transmission(struct b43_wldev *dev, bool ofdm, bool pa_on)
 {
-	struct b43_wl *wl = dev->wl;
 	struct b43_phy *phy = &dev->phy;
 	unsigned int i, max_loop;
 	u16 value;
@@ -720,9 +663,6 @@ void b43_dummy_transmission(struct b43_wldev *dev, bool ofdm, bool pa_on)
 		buffer[0] = 0x000B846E;
 	}
 
-	spin_lock_irq(&wl->irq_lock);
-	write_lock(&wl->tx_lock);
-
 	for (i = 0; i < 5; i++)
 		b43_ram_write(dev, i * 4, buffer[i]);
 
@@ -778,9 +718,6 @@ void b43_dummy_transmission(struct b43_wldev *dev, bool ofdm, bool pa_on)
 	}
 	if (phy->radio_ver == 0x2050 && phy->radio_rev <= 0x5)
 		b43_radio_write16(dev, 0x0051, 0x0037);
-
-	write_unlock(&wl->tx_lock);
-	spin_unlock_irq(&wl->irq_lock);
 }
 
 static void key_write(struct b43_wldev *dev,
@@ -1620,6 +1557,27 @@ static void handle_irq_beacon(struct b43_wldev *dev)
 	}
 }
 
+static void b43_do_beacon_update_trigger_work(struct b43_wldev *dev)
+{
+	u32 old_irq_mask = dev->irq_mask;
+
+	/* update beacon right away or defer to irq */
+	handle_irq_beacon(dev);
+	if (old_irq_mask != dev->irq_mask) {
+		/* The handler updated the IRQ mask. */
+		B43_WARN_ON(!dev->irq_mask);
+		if (b43_read32(dev, B43_MMIO_GEN_IRQ_MASK)) {
+			b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, dev->irq_mask);
+		} else {
+			/* Device interrupts are currently disabled. That means
+			 * we just ran the hardirq handler and scheduled the
+			 * IRQ thread. The thread will write the IRQ mask when
+			 * it finished, so there's nothing to do here. Writing
+			 * the mask _here_ would incorrectly re-enable IRQs. */
+		}
+	}
+}
+
 static void b43_beacon_update_trigger_work(struct work_struct *work)
 {
 	struct b43_wl *wl = container_of(work, struct b43_wl,
@@ -1629,19 +1587,22 @@ static void b43_beacon_update_trigger_work(struct work_struct *work)
 	mutex_lock(&wl->mutex);
 	dev = wl->current_dev;
 	if (likely(dev && (b43_status(dev) >= B43_STAT_INITIALIZED))) {
-		spin_lock_irq(&wl->irq_lock);
-		/* update beacon right away or defer to irq */
-		handle_irq_beacon(dev);
-		/* The handler might have updated the IRQ mask. */
-		b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, dev->irq_mask);
-		mmiowb();
-		spin_unlock_irq(&wl->irq_lock);
+		if (0 /*FIXME dev->dev->bus->bustype == SSB_BUSTYPE_SDIO*/) {
+			/* wl->mutex is enough. */
+			b43_do_beacon_update_trigger_work(dev);
+			mmiowb();
+		} else {
+			spin_lock_irq(&wl->hardirq_lock);
+			b43_do_beacon_update_trigger_work(dev);
+			mmiowb();
+			spin_unlock_irq(&wl->hardirq_lock);
+		}
 	}
 	mutex_unlock(&wl->mutex);
 }
 
 /* Asynchronously update the packet templates in template RAM.
- * Locking: Requires wl->irq_lock to be locked. */
+ * Locking: Requires wl->mutex to be locked. */
 static void b43_update_templates(struct b43_wl *wl)
 {
 	struct sk_buff *beacon;
@@ -1778,18 +1739,15 @@ out:
 			B43_DEBUGIRQ_REASON_REG, B43_DEBUGIRQ_ACK);
 }
 
-/* Interrupt handler bottom-half */
-static void b43_interrupt_tasklet(struct b43_wldev *dev)
+static void b43_do_interrupt_thread(struct b43_wldev *dev)
 {
 	u32 reason;
 	u32 dma_reason[ARRAY_SIZE(dev->dma_reason)];
 	u32 merged_dma_reason = 0;
 	int i;
-	unsigned long flags;
-
-	spin_lock_irqsave(&dev->wl->irq_lock, flags);
 
-	B43_WARN_ON(b43_status(dev) != B43_STAT_STARTED);
+	if (unlikely(b43_status(dev) != B43_STAT_STARTED))
+		return;
 
 	reason = dev->irq_reason;
 	for (i = 0; i < ARRAY_SIZE(dma_reason); i++) {
@@ -1822,8 +1780,6 @@ static void b43_interrupt_tasklet(struct b43_wldev *dev)
 			       dma_reason[2], dma_reason[3],
 			       dma_reason[4], dma_reason[5]);
 			b43_controller_restart(dev, "DMA error");
-			mmiowb();
-			spin_unlock_irqrestore(&dev->wl->irq_lock, flags);
 			return;
 		}
 		if (merged_dma_reason & B43_DMAIRQ_NONFATALMASK) {
@@ -1867,47 +1823,36 @@ static void b43_interrupt_tasklet(struct b43_wldev *dev)
 	if (reason & B43_IRQ_TX_OK)
 		handle_irq_transmit_status(dev);
 
+	/* Re-enable interrupts on the device by restoring the current interrupt mask. */
 	b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, dev->irq_mask);
-	mmiowb();
-	spin_unlock_irqrestore(&dev->wl->irq_lock, flags);
 }
 
-static void b43_interrupt_ack(struct b43_wldev *dev, u32 reason)
+/* Interrupt thread handler. Handles device interrupts in thread context. */
+static irqreturn_t b43_interrupt_thread_handler(int irq, void *dev_id)
 {
-	b43_write32(dev, B43_MMIO_GEN_IRQ_REASON, reason);
+	struct b43_wldev *dev = dev_id;
 
-	b43_write32(dev, B43_MMIO_DMA0_REASON, dev->dma_reason[0]);
-	b43_write32(dev, B43_MMIO_DMA1_REASON, dev->dma_reason[1]);
-	b43_write32(dev, B43_MMIO_DMA2_REASON, dev->dma_reason[2]);
-	b43_write32(dev, B43_MMIO_DMA3_REASON, dev->dma_reason[3]);
-	b43_write32(dev, B43_MMIO_DMA4_REASON, dev->dma_reason[4]);
-/* Unused ring
-	b43_write32(dev, B43_MMIO_DMA5_REASON, dev->dma_reason[5]);
-*/
+	mutex_lock(&dev->wl->mutex);
+	b43_do_interrupt_thread(dev);
+	mmiowb();
+	mutex_unlock(&dev->wl->mutex);
+
+	return IRQ_HANDLED;
 }
 
-/* Interrupt handler top-half */
-static irqreturn_t b43_interrupt_handler(int irq, void *dev_id)
+static irqreturn_t b43_do_interrupt(struct b43_wldev *dev)
 {
-	irqreturn_t ret = IRQ_NONE;
-	struct b43_wldev *dev = dev_id;
 	u32 reason;
 
-	B43_WARN_ON(!dev);
+	/* This code runs under wl->hardirq_lock, but _only_ on non-SDIO busses.
+	 * On SDIO, this runs under wl->mutex. */
 
-	spin_lock(&dev->wl->irq_lock);
-
-	if (unlikely(b43_status(dev) < B43_STAT_STARTED)) {
-		/* This can only happen on shared IRQ lines. */
-		goto out;
-	}
 	reason = b43_read32(dev, B43_MMIO_GEN_IRQ_REASON);
 	if (reason == 0xffffffff)	/* shared IRQ */
-		goto out;
-	ret = IRQ_HANDLED;
+		return IRQ_NONE;
 	reason &= dev->irq_mask;
 	if (!reason)
-		goto out;
+		return IRQ_HANDLED;
 
 	dev->dma_reason[0] = b43_read32(dev, B43_MMIO_DMA0_REASON)
 	    & 0x0001DC00;
@@ -1924,15 +1869,38 @@ static irqreturn_t b43_interrupt_handler(int irq, void *dev_id)
 	    & 0x0000DC00;
 */
 
-	b43_interrupt_ack(dev, reason);
-	/* disable all IRQs. They are enabled again in the bottom half. */
+	/* ACK the interrupt. */
+	b43_write32(dev, B43_MMIO_GEN_IRQ_REASON, reason);
+	b43_write32(dev, B43_MMIO_DMA0_REASON, dev->dma_reason[0]);
+	b43_write32(dev, B43_MMIO_DMA1_REASON, dev->dma_reason[1]);
+	b43_write32(dev, B43_MMIO_DMA2_REASON, dev->dma_reason[2]);
+	b43_write32(dev, B43_MMIO_DMA3_REASON, dev->dma_reason[3]);
+	b43_write32(dev, B43_MMIO_DMA4_REASON, dev->dma_reason[4]);
+/* Unused ring
+	b43_write32(dev, B43_MMIO_DMA5_REASON, dev->dma_reason[5]);
+*/
+
+	/* Disable IRQs on the device. The IRQ thread handler will re-enable them. */
 	b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, 0);
-	/* save the reason code and call our bottom half. */
+	/* Save the reason bitmasks for the IRQ thread handler. */
 	dev->irq_reason = reason;
-	tasklet_schedule(&dev->isr_tasklet);
-out:
+
+	return IRQ_WAKE_THREAD;
+}
+
+/* Interrupt handler top-half. This runs with interrupts disabled. */
+static irqreturn_t b43_interrupt_handler(int irq, void *dev_id)
+{
+	struct b43_wldev *dev = dev_id;
+	irqreturn_t ret;
+
+	if (unlikely(b43_status(dev) < B43_STAT_STARTED))
+		return IRQ_NONE;
+
+	spin_lock(&dev->wl->hardirq_lock);
+	ret = b43_do_interrupt(dev);
 	mmiowb();
-	spin_unlock(&dev->wl->irq_lock);
+	spin_unlock(&dev->wl->hardirq_lock);
 
 	return ret;
 }
@@ -3038,15 +3006,12 @@ static void b43_security_init(struct b43_wldev *dev)
 static int b43_rng_read(struct hwrng *rng, u32 *data)
 {
 	struct b43_wl *wl = (struct b43_wl *)rng->priv;
-	unsigned long flags;
 
-	/* Don't take wl->mutex here, as it could deadlock with
-	 * hwrng internal locking. It's not needed to take
-	 * wl->mutex here, anyway. */
+	/* FIXME: We need to take wl->mutex here to make sure the device
+	 * is not going away from under our ass. However it could deadlock
+	 * with hwrng internal locking. */
 
-	spin_lock_irqsave(&wl->irq_lock, flags);
 	*data = b43_read16(wl->current_dev, B43_MMIO_RNG);
-	spin_unlock_irqrestore(&wl->irq_lock, flags);
 
 	return (sizeof(u16));
 }
@@ -3082,46 +3047,52 @@ static int b43_rng_init(struct b43_wl *wl)
 	return err;
 }
 
-static int b43_op_tx(struct ieee80211_hw *hw,
-		     struct sk_buff *skb)
+static void b43_tx_work(struct work_struct *work)
 {
-	struct b43_wl *wl = hw_to_b43_wl(hw);
-	struct b43_wldev *dev = wl->current_dev;
-	unsigned long flags;
-	int err;
+	struct b43_wl *wl = container_of(work, struct b43_wl, tx_work);
+	struct b43_wldev *dev;
+	struct sk_buff *skb;
+	int err = 0;
 
-	if (unlikely(skb->len < 2 + 2 + 6)) {
-		/* Too short, this can't be a valid frame. */
-		goto drop_packet;
+	mutex_lock(&wl->mutex);
+	dev = wl->current_dev;
+	if (unlikely(!dev || b43_status(dev) < B43_STAT_STARTED)) {
+		mutex_unlock(&wl->mutex);
+		return;
 	}
-	B43_WARN_ON(skb_shinfo(skb)->nr_frags);
-	if (unlikely(!dev))
-		goto drop_packet;
 
-	/* Transmissions on seperate queues can run concurrently. */
-	read_lock_irqsave(&wl->tx_lock, flags);
+	while (skb_queue_len(&wl->tx_queue)) {
+		skb = skb_dequeue(&wl->tx_queue);
 
-	err = -ENODEV;
-	if (likely(b43_status(dev) >= B43_STAT_STARTED)) {
 		if (b43_using_pio_transfers(dev))
 			err = b43_pio_tx(dev, skb);
 		else
 			err = b43_dma_tx(dev, skb);
+		if (unlikely(err))
+			dev_kfree_skb(skb); /* Drop it */
 	}
 
-	read_unlock_irqrestore(&wl->tx_lock, flags);
+	mutex_unlock(&wl->mutex);
+}
 
-	if (unlikely(err))
-		goto drop_packet;
-	return NETDEV_TX_OK;
+static int b43_op_tx(struct ieee80211_hw *hw,
+		     struct sk_buff *skb)
+{
+	struct b43_wl *wl = hw_to_b43_wl(hw);
+
+	if (unlikely(skb->len < 2 + 2 + 6)) {
+		/* Too short, this can't be a valid frame. */
+		dev_kfree_skb_any(skb);
+		return NETDEV_TX_OK;
+	}
+	B43_WARN_ON(skb_shinfo(skb)->nr_frags);
+
+	skb_queue_tail(&wl->tx_queue, skb);
+	ieee80211_queue_work(wl->hw, &wl->tx_work);
 
-drop_packet:
-	/* We can not transmit this packet. Drop it. */
-	dev_kfree_skb_any(skb);
 	return NETDEV_TX_OK;
 }
 
-/* Locking: wl->irq_lock */
 static void b43_qos_params_upload(struct b43_wldev *dev,
 				  const struct ieee80211_tx_queue_params *p,
 				  u16 shm_offset)
@@ -3130,6 +3101,9 @@ static void b43_qos_params_upload(struct b43_wldev *dev,
 	int bslots, tmp;
 	unsigned int i;
 
+	if (!dev->qos_enabled)
+		return;
+
 	bslots = b43_read16(dev, B43_MMIO_RNG) & p->cw_min;
 
 	memset(&params, 0, sizeof(params));
@@ -3175,6 +3149,9 @@ static void b43_qos_upload_all(struct b43_wldev *dev)
 	struct b43_qos_params *params;
 	unsigned int i;
 
+	if (!dev->qos_enabled)
+		return;
+
 	BUILD_BUG_ON(ARRAY_SIZE(b43_qos_shm_offsets) !=
 		     ARRAY_SIZE(wl->qos_params));
 
@@ -3234,6 +3211,16 @@ static void b43_qos_clear(struct b43_wl *wl)
 /* Initialize the core's QOS capabilities */
 static void b43_qos_init(struct b43_wldev *dev)
 {
+	if (!dev->qos_enabled) {
+		/* Disable QOS support. */
+		b43_hf_write(dev, b43_hf_read(dev) & ~B43_HF_EDCF);
+		b43_write16(dev, B43_MMIO_IFSCTL,
+			    b43_read16(dev, B43_MMIO_IFSCTL)
+			    & ~B43_MMIO_IFSCTL_USE_EDCF);
+		b43dbg(dev->wl, "QoS disabled\n");
+		return;
+	}
+
 	/* Upload the current QOS parameters. */
 	b43_qos_upload_all(dev);
 
@@ -3242,6 +3229,7 @@ static void b43_qos_init(struct b43_wldev *dev)
 	b43_write16(dev, B43_MMIO_IFSCTL,
 		    b43_read16(dev, B43_MMIO_IFSCTL)
 		    | B43_MMIO_IFSCTL_USE_EDCF);
+	b43dbg(dev->wl, "QoS enabled\n");
 }
 
 static int b43_op_conf_tx(struct ieee80211_hw *hw, u16 _queue,
@@ -3283,22 +3271,20 @@ static int b43_op_get_tx_stats(struct ieee80211_hw *hw,
 			       struct ieee80211_tx_queue_stats *stats)
 {
 	struct b43_wl *wl = hw_to_b43_wl(hw);
-	struct b43_wldev *dev = wl->current_dev;
-	unsigned long flags;
+	struct b43_wldev *dev;
 	int err = -ENODEV;
 
-	if (!dev)
-		goto out;
-	spin_lock_irqsave(&wl->irq_lock, flags);
-	if (likely(b43_status(dev) >= B43_STAT_STARTED)) {
+	mutex_lock(&wl->mutex);
+	dev = wl->current_dev;
+	if (dev && b43_status(dev) >= B43_STAT_STARTED) {
 		if (b43_using_pio_transfers(dev))
 			b43_pio_get_tx_stats(dev, stats);
 		else
 			b43_dma_get_tx_stats(dev, stats);
 		err = 0;
 	}
-	spin_unlock_irqrestore(&wl->irq_lock, flags);
-out:
+	mutex_unlock(&wl->mutex);
+
 	return err;
 }
 
@@ -3306,11 +3292,10 @@ static int b43_op_get_stats(struct ieee80211_hw *hw,
 			    struct ieee80211_low_level_stats *stats)
 {
 	struct b43_wl *wl = hw_to_b43_wl(hw);
-	unsigned long flags;
 
-	spin_lock_irqsave(&wl->irq_lock, flags);
+	mutex_lock(&wl->mutex);
 	memcpy(stats, &wl->ieee_stats, sizeof(*stats));
-	spin_unlock_irqrestore(&wl->irq_lock, flags);
+	mutex_unlock(&wl->mutex);
 
 	return 0;
 }
@@ -3322,7 +3307,6 @@ static u64 b43_op_get_tsf(struct ieee80211_hw *hw)
 	u64 tsf;
 
 	mutex_lock(&wl->mutex);
-	spin_lock_irq(&wl->irq_lock);
 	dev = wl->current_dev;
 
 	if (dev && (b43_status(dev) >= B43_STAT_INITIALIZED))
@@ -3330,7 +3314,6 @@ static u64 b43_op_get_tsf(struct ieee80211_hw *hw)
 	else
 		tsf = 0;
 
-	spin_unlock_irq(&wl->irq_lock);
 	mutex_unlock(&wl->mutex);
 
 	return tsf;
@@ -3342,13 +3325,11 @@ static void b43_op_set_tsf(struct ieee80211_hw *hw, u64 tsf)
 	struct b43_wldev *dev;
 
 	mutex_lock(&wl->mutex);
-	spin_lock_irq(&wl->irq_lock);
 	dev = wl->current_dev;
 
 	if (dev && (b43_status(dev) >= B43_STAT_INITIALIZED))
 		b43_tsf_write(dev, tsf);
 
-	spin_unlock_irq(&wl->irq_lock);
 	mutex_unlock(&wl->mutex);
 }
 
@@ -3434,7 +3415,7 @@ static int b43_switch_band(struct b43_wl *wl, struct ieee80211_channel *chan)
 	prev_status = b43_status(down_dev);
 	/* Shutdown the currently running core. */
 	if (prev_status >= B43_STAT_STARTED)
-		b43_wireless_core_stop(down_dev);
+		down_dev = b43_wireless_core_stop(down_dev);
 	if (prev_status >= B43_STAT_INITIALIZED)
 		b43_wireless_core_exit(down_dev);
 
@@ -3498,7 +3479,6 @@ static int b43_op_config(struct ieee80211_hw *hw, u32 changed)
 	struct b43_wldev *dev;
 	struct b43_phy *phy;
 	struct ieee80211_conf *conf = &hw->conf;
-	unsigned long flags;
 	int antenna;
 	int err = 0;
 
@@ -3529,13 +3509,11 @@ static int b43_op_config(struct ieee80211_hw *hw, u32 changed)
 
 	/* Adjust the desired TX power level. */
 	if (conf->power_level != 0) {
-		spin_lock_irqsave(&wl->irq_lock, flags);
 		if (conf->power_level != phy->desired_txpower) {
 			phy->desired_txpower = conf->power_level;
 			b43_phy_txpower_check(dev, B43_TXPWR_IGNORE_TIME |
 						   B43_TXPWR_IGNORE_TSSI);
 		}
-		spin_unlock_irqrestore(&wl->irq_lock, flags);
 	}
 
 	/* Antennas for RX and management frame TX. */
@@ -3620,7 +3598,6 @@ static void b43_op_bss_info_changed(struct ieee80211_hw *hw,
 {
 	struct b43_wl *wl = hw_to_b43_wl(hw);
 	struct b43_wldev *dev;
-	unsigned long flags;
 
 	mutex_lock(&wl->mutex);
 
@@ -3630,7 +3607,6 @@ static void b43_op_bss_info_changed(struct ieee80211_hw *hw,
 
 	B43_WARN_ON(wl->vif != vif);
 
-	spin_lock_irqsave(&wl->irq_lock, flags);
 	if (changed & BSS_CHANGED_BSSID) {
 		if (conf->bssid)
 			memcpy(wl->bssid, conf->bssid, ETH_ALEN);
@@ -3648,7 +3624,6 @@ static void b43_op_bss_info_changed(struct ieee80211_hw *hw,
 		if (changed & BSS_CHANGED_BSSID)
 			b43_write_mac_bssid_templates(dev);
 	}
-	spin_unlock_irqrestore(&wl->irq_lock, flags);
 
 	b43_mac_suspend(dev);
 
@@ -3689,15 +3664,6 @@ static int b43_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 		return -ENOSPC; /* User disabled HW-crypto */
 
 	mutex_lock(&wl->mutex);
-	spin_lock_irq(&wl->irq_lock);
-	write_lock(&wl->tx_lock);
-	/* Why do we need all this locking here?
-	 * mutex     -> Every config operation must take it.
-	 * irq_lock  -> We modify the dev->key array, which is accessed
-	 *              in the IRQ handlers.
-	 * tx_lock   -> We modify the dev->key array, which is accessed
-	 *              in the TX handler.
-	 */
 
 	dev = wl->current_dev;
 	err = -ENODEV;
@@ -3789,8 +3755,6 @@ out_unlock:
 		       sta ? sta->addr : bcast_addr);
 		b43_dump_keymemory(dev);
 	}
-	write_unlock(&wl->tx_lock);
-	spin_unlock_irq(&wl->irq_lock);
 	mutex_unlock(&wl->mutex);
 
 	return err;
@@ -3801,15 +3765,15 @@ static void b43_op_configure_filter(struct ieee80211_hw *hw,
 				    u64 multicast)
 {
 	struct b43_wl *wl = hw_to_b43_wl(hw);
-	struct b43_wldev *dev = wl->current_dev;
-	unsigned long flags;
+	struct b43_wldev *dev;
 
+	mutex_lock(&wl->mutex);
+	dev = wl->current_dev;
 	if (!dev) {
 		*fflags = 0;
-		return;
+		goto out_unlock;
 	}
 
-	spin_lock_irqsave(&wl->irq_lock, flags);
 	*fflags &= FIF_PROMISC_IN_BSS |
 		  FIF_ALLMULTI |
 		  FIF_FCSFAIL |
@@ -3830,41 +3794,70 @@ static void b43_op_configure_filter(struct ieee80211_hw *hw,
 
 	if (changed && b43_status(dev) >= B43_STAT_INITIALIZED)
 		b43_adjust_opmode(dev);
-	spin_unlock_irqrestore(&wl->irq_lock, flags);
+
+out_unlock:
+	mutex_unlock(&wl->mutex);
 }
 
-/* Locking: wl->mutex */
-static void b43_wireless_core_stop(struct b43_wldev *dev)
+/* Locking: wl->mutex
+ * Returns the current dev. This might be different from the passed in dev,
+ * because the core might be gone away while we unlocked the mutex. */
+static struct b43_wldev * b43_wireless_core_stop(struct b43_wldev *dev)
 {
 	struct b43_wl *wl = dev->wl;
-	unsigned long flags;
+	struct b43_wldev *orig_dev;
 
-	if (b43_status(dev) < B43_STAT_STARTED)
-		return;
+redo:
+	if (!dev || b43_status(dev) < B43_STAT_STARTED)
+		return dev;
 
-	/* Disable and sync interrupts. We must do this before than
-	 * setting the status to INITIALIZED, as the interrupt handler
-	 * won't care about IRQs then. */
-	spin_lock_irqsave(&wl->irq_lock, flags);
-	b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, 0);
-	b43_read32(dev, B43_MMIO_GEN_IRQ_MASK);	/* flush */
-	spin_unlock_irqrestore(&wl->irq_lock, flags);
-	b43_synchronize_irq(dev);
+	/* Cancel work. Unlock to avoid deadlocks. */
+	mutex_unlock(&wl->mutex);
+	cancel_delayed_work_sync(&dev->periodic_work);
+	cancel_work_sync(&wl->tx_work);
+	mutex_lock(&wl->mutex);
+	dev = wl->current_dev;
+	if (!dev || b43_status(dev) < B43_STAT_STARTED) {
+		/* Whoops, aliens ate up the device while we were unlocked. */
+		return dev;
+	}
 
-	write_lock_irqsave(&wl->tx_lock, flags);
+	/* Disable interrupts on the device. */
 	b43_set_status(dev, B43_STAT_INITIALIZED);
-	write_unlock_irqrestore(&wl->tx_lock, flags);
-
-	b43_pio_stop(dev);
+	if (0 /*FIXME dev->dev->bus->bustype == SSB_BUSTYPE_SDIO*/) {
+		/* wl->mutex is locked. That is enough. */
+		b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, 0);
+		b43_read32(dev, B43_MMIO_GEN_IRQ_MASK);	/* Flush */
+	} else {
+		spin_lock_irq(&wl->hardirq_lock);
+		b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, 0);
+		b43_read32(dev, B43_MMIO_GEN_IRQ_MASK);	/* Flush */
+		spin_unlock_irq(&wl->hardirq_lock);
+	}
+	/* Synchronize the interrupt handlers. Unlock to avoid deadlocks. */
+	orig_dev = dev;
 	mutex_unlock(&wl->mutex);
-	/* Must unlock as it would otherwise deadlock. No races here.
-	 * Cancel the possibly running self-rearming periodic work. */
-	cancel_delayed_work_sync(&dev->periodic_work);
+	synchronize_irq(dev->dev->irq);
 	mutex_lock(&wl->mutex);
+	dev = wl->current_dev;
+	if (!dev)
+		return dev;
+	if (dev != orig_dev) {
+		if (b43_status(dev) >= B43_STAT_STARTED)
+			goto redo;
+		return dev;
+	}
+	B43_WARN_ON(b43_read32(dev, B43_MMIO_GEN_IRQ_MASK));
+
+	/* Drain the TX queue */
+	while (skb_queue_len(&wl->tx_queue))
+		dev_kfree_skb(skb_dequeue(&wl->tx_queue));
 
 	b43_mac_suspend(dev);
 	free_irq(dev->dev->irq, dev);
 	b43dbg(wl, "Wireless interface stopped\n");
+
+	return dev;
 }
 
 /* Locking: wl->mutex */
@@ -3875,8 +3868,9 @@ static int b43_wireless_core_start(struct b43_wldev *dev)
 	B43_WARN_ON(b43_status(dev) != B43_STAT_INITIALIZED);
 
 	drain_txstatus_queue(dev);
-	err = request_irq(dev->dev->irq, b43_interrupt_handler,
-			  IRQF_SHARED, KBUILD_MODNAME, dev);
+	err = request_threaded_irq(dev->dev->irq, b43_interrupt_handler,
+				   b43_interrupt_thread_handler,
+				   IRQF_SHARED, KBUILD_MODNAME, dev);
 	if (err) {
 		b43err(dev->wl, "Cannot request IRQ-%d\n", dev->dev->irq);
 		goto out;
@@ -4098,16 +4092,20 @@ static void b43_imcfglo_timeouts_workaround(struct b43_wldev *dev)
 	    bus->pcicore.dev->id.revision <= 5) {
 		/* IMCFGLO timeouts workaround. */
 		tmp = ssb_read32(dev->dev, SSB_IMCFGLO);
-		tmp &= ~SSB_IMCFGLO_REQTO;
-		tmp &= ~SSB_IMCFGLO_SERTO;
 		switch (bus->bustype) {
 		case SSB_BUSTYPE_PCI:
 		case SSB_BUSTYPE_PCMCIA:
+			tmp &= ~SSB_IMCFGLO_REQTO;
+			tmp &= ~SSB_IMCFGLO_SERTO;
 			tmp |= 0x32;
 			break;
 		case SSB_BUSTYPE_SSB:
+			tmp &= ~SSB_IMCFGLO_REQTO;
+			tmp &= ~SSB_IMCFGLO_SERTO;
 			tmp |= 0x53;
 			break;
+		default:
+			break;
 		}
 		ssb_write32(dev->dev, SSB_IMCFGLO, tmp);
 	}
@@ -4155,8 +4153,8 @@ static void b43_wireless_core_exit(struct b43_wldev *dev)
 {
 	u32 macctl;
 
-	B43_WARN_ON(b43_status(dev) > B43_STAT_INITIALIZED);
-	if (b43_status(dev) != B43_STAT_INITIALIZED)
+	B43_WARN_ON(dev && b43_status(dev) > B43_STAT_INITIALIZED);
+	if (!dev || b43_status(dev) != B43_STAT_INITIALIZED)
 		return;
 	b43_set_status(dev, B43_STAT_UNINIT);
 
@@ -4309,7 +4307,6 @@ static int b43_op_add_interface(struct ieee80211_hw *hw,
 {
 	struct b43_wl *wl = hw_to_b43_wl(hw);
 	struct b43_wldev *dev;
-	unsigned long flags;
 	int err = -EOPNOTSUPP;
 
 	/* TODO: allow WDS/AP devices to coexist */
@@ -4333,12 +4330,10 @@ static int b43_op_add_interface(struct ieee80211_hw *hw,
 	wl->if_type = conf->type;
 	memcpy(wl->mac_addr, conf->mac_addr, ETH_ALEN);
 
-	spin_lock_irqsave(&wl->irq_lock, flags);
 	b43_adjust_opmode(dev);
 	b43_set_pretbtt(dev);
 	b43_set_synth_pu_delay(dev, 0);
 	b43_upload_card_macaddress(dev);
-	spin_unlock_irqrestore(&wl->irq_lock, flags);
 
 	err = 0;
  out_mutex_unlock:
@@ -4352,7 +4347,6 @@ static void b43_op_remove_interface(struct ieee80211_hw *hw,
 {
 	struct b43_wl *wl = hw_to_b43_wl(hw);
 	struct b43_wldev *dev = wl->current_dev;
-	unsigned long flags;
 
 	b43dbg(wl, "Removing Interface type %d\n", conf->type);
 
@@ -4364,11 +4358,9 @@ static void b43_op_remove_interface(struct ieee80211_hw *hw,
 
 	wl->operating = 0;
 
-	spin_lock_irqsave(&wl->irq_lock, flags);
 	b43_adjust_opmode(dev);
 	memset(wl->mac_addr, 0, ETH_ALEN);
 	b43_upload_card_macaddress(dev);
-	spin_unlock_irqrestore(&wl->irq_lock, flags);
 
 	mutex_unlock(&wl->mutex);
 }
@@ -4428,10 +4420,15 @@ static void b43_op_stop(struct ieee80211_hw *hw)
 	cancel_work_sync(&(wl->beacon_update_trigger));
 
 	mutex_lock(&wl->mutex);
-	if (b43_status(dev) >= B43_STAT_STARTED)
-		b43_wireless_core_stop(dev);
+	if (b43_status(dev) >= B43_STAT_STARTED) {
+		dev = b43_wireless_core_stop(dev);
+		if (!dev)
+			goto out_unlock;
+	}
 	b43_wireless_core_exit(dev);
 	wl->radio_enabled = 0;
+
+out_unlock:
 	mutex_unlock(&wl->mutex);
 
 	cancel_work_sync(&(wl->txpower_adjust_work));
@@ -4441,11 +4438,10 @@ static int b43_op_beacon_set_tim(struct ieee80211_hw *hw,
 				 struct ieee80211_sta *sta, bool set)
 {
 	struct b43_wl *wl = hw_to_b43_wl(hw);
-	unsigned long flags;
 
-	spin_lock_irqsave(&wl->irq_lock, flags);
+	mutex_lock(&wl->mutex);
 	b43_update_templates(wl);
-	spin_unlock_irqrestore(&wl->irq_lock, flags);
+	mutex_unlock(&wl->mutex);
 
 	return 0;
 }
@@ -4526,8 +4522,13 @@ static void b43_chip_reset(struct work_struct *work)
 
 	prev_status = b43_status(dev);
 	/* Bring the device down... */
-	if (prev_status >= B43_STAT_STARTED)
-		b43_wireless_core_stop(dev);
+	if (prev_status >= B43_STAT_STARTED) {
+		dev = b43_wireless_core_stop(dev);
+		if (!dev) {
+			err = -ENODEV;
+			goto out;
+		}
+	}
 	if (prev_status >= B43_STAT_INITIALIZED)
 		b43_wireless_core_exit(dev);
 
@@ -4742,9 +4743,6 @@ static int b43_one_core_attach(struct ssb_device *dev, struct b43_wl *wl)
 	wldev->wl = wl;
 	b43_set_status(wldev, B43_STAT_UNINIT);
 	wldev->bad_frames_preempt = modparam_bad_frames_preempt;
-	tasklet_init(&wldev->isr_tasklet,
-		     (void (*)(unsigned long))b43_interrupt_tasklet,
-		     (unsigned long)wldev);
 	INIT_LIST_HEAD(&wldev->list);
 
 	err = b43_wireless_core_attach(wldev);
@@ -4841,14 +4839,14 @@ static int b43_wireless_init(struct ssb_device *dev)
 
 	/* Initialize struct b43_wl */
 	wl->hw = hw;
-	spin_lock_init(&wl->irq_lock);
-	rwlock_init(&wl->tx_lock);
 	spin_lock_init(&wl->leds_lock);
-	spin_lock_init(&wl->shm_lock);
 	mutex_init(&wl->mutex);
+	spin_lock_init(&wl->hardirq_lock);
 	INIT_LIST_HEAD(&wl->devlist);
 	INIT_WORK(&wl->beacon_update_trigger, b43_beacon_update_trigger_work);
 	INIT_WORK(&wl->txpower_adjust_work, b43_phy_txpower_adjust_work);
+	INIT_WORK(&wl->tx_work, b43_tx_work);
+	skb_queue_head_init(&wl->tx_queue);
 
 	ssb_set_devtypedata(dev, wl);
 	b43info(wl, "Broadcom %04X WLAN found (core revision %u)\n",
@@ -4946,8 +4944,8 @@ static int b43_suspend(struct ssb_device *dev, pm_message_t state)
 	wldev->suspend_in_progress = true;
 	wldev->suspend_init_status = b43_status(wldev);
 	if (wldev->suspend_init_status >= B43_STAT_STARTED)
-		b43_wireless_core_stop(wldev);
-	if (wldev->suspend_init_status >= B43_STAT_INITIALIZED)
+		wldev = b43_wireless_core_stop(wldev);
+	if (wldev && wldev->suspend_init_status >= B43_STAT_INITIALIZED)
 		b43_wireless_core_exit(wldev);
 	mutex_unlock(&wl->mutex);
 
diff --git a/drivers/net/wireless/b43/main.h b/drivers/net/wireless/b43/main.h
index 0406e06781d..40db03678d9 100644
--- a/drivers/net/wireless/b43/main.h
+++ b/drivers/net/wireless/b43/main.h
@@ -112,13 +112,9 @@ void b43_tsf_read(struct b43_wldev *dev, u64 * tsf);
 void b43_tsf_write(struct b43_wldev *dev, u64 tsf);
 
 u32 b43_shm_read32(struct b43_wldev *dev, u16 routing, u16 offset);
-u32 __b43_shm_read32(struct b43_wldev *dev, u16 routing, u16 offset);
 u16 b43_shm_read16(struct b43_wldev *dev, u16 routing, u16 offset);
-u16 __b43_shm_read16(struct b43_wldev *dev, u16 routing, u16 offset);
 void b43_shm_write32(struct b43_wldev *dev, u16 routing, u16 offset, u32 value);
-void __b43_shm_write32(struct b43_wldev *dev, u16 routing, u16 offset, u32 value);
 void b43_shm_write16(struct b43_wldev *dev, u16 routing, u16 offset, u16 value);
-void __b43_shm_write16(struct b43_wldev *dev, u16 routing, u16 offset, u16 value);
 
 u64 b43_hf_read(struct b43_wldev *dev);
 void b43_hf_write(struct b43_wldev *dev, u64 value);
diff --git a/drivers/net/wireless/b43/phy_common.c b/drivers/net/wireless/b43/phy_common.c
index 6e704becda6..75b26e175e8 100644
--- a/drivers/net/wireless/b43/phy_common.c
+++ b/drivers/net/wireless/b43/phy_common.c
@@ -347,7 +347,6 @@ void b43_phy_txpower_adjust_work(struct work_struct *work)
 	mutex_unlock(&wl->mutex);
 }
 
-/* Called with wl->irq_lock locked */
 void b43_phy_txpower_check(struct b43_wldev *dev, unsigned int flags)
 {
 	struct b43_phy *phy = &dev->phy;
diff --git a/drivers/net/wireless/b43/phy_common.h b/drivers/net/wireless/b43/phy_common.h
index 28e384633c3..9edd4e8e0c8 100644
--- a/drivers/net/wireless/b43/phy_common.h
+++ b/drivers/net/wireless/b43/phy_common.h
@@ -131,7 +131,7 @@ enum b43_txpwr_result {
  * 			If the parameter "ignore_tssi" is true, the TSSI values should
  * 			be ignored and a recalculation of the power settings should be
  * 			done even if the TSSI values did not change.
- * 			This callback is called with wl->irq_lock held and must not sleep.
+ * 			This function may sleep, but should not.
  * 			Must not be NULL.
  * @adjust_txpower:	Write the previously calculated TX power settings
  * 			(from @recalc_txpower) to the hardware.
@@ -379,7 +379,6 @@ void b43_software_rfkill(struct b43_wldev *dev, bool blocked);
  *
  * Compare the current TX power output to the desired power emission
  * and schedule an adjustment in case it mismatches.
- * Requires wl->irq_lock locked.
  *
  * @flags:	OR'ed enum b43_phy_txpower_check_flags flags.
  * 		See the docs below.
diff --git a/drivers/net/wireless/b43/phy_g.c b/drivers/net/wireless/b43/phy_g.c
index 5afa4df0b02..382826a8da8 100644
--- a/drivers/net/wireless/b43/phy_g.c
+++ b/drivers/net/wireless/b43/phy_g.c
@@ -2823,8 +2823,6 @@ static void b43_gphy_op_adjust_txpower(struct b43_wldev *dev)
 
 	b43_mac_suspend(dev);
 
-	spin_lock_irq(&dev->wl->irq_lock);
-
 	/* Calculate the new attenuation values. */
 	bbatt = gphy->bbatt.att;
 	bbatt += gphy->bbatt_delta;
@@ -2864,11 +2862,6 @@ static void b43_gphy_op_adjust_txpower(struct b43_wldev *dev)
 	gphy->rfatt.att = rfatt;
 	gphy->bbatt.att = bbatt;
 
-	/* We drop the lock early, so we can sleep during hardware
-	 * adjustment. Possible races with op_recalc_txpower are harmless,
-	 * as we will be called once again in case we raced. */
-	spin_unlock_irq(&dev->wl->irq_lock);
-
 	if (b43_debug(dev, B43_DBG_XMITPOWER))
 		b43dbg(dev->wl, "Adjusting TX power\n");
 
diff --git a/drivers/net/wireless/b43/phy_g.h b/drivers/net/wireless/b43/phy_g.h
index 718947fd41a..8569fdd4c6b 100644
--- a/drivers/net/wireless/b43/phy_g.h
+++ b/drivers/net/wireless/b43/phy_g.h
@@ -141,8 +141,7 @@ struct b43_phy_g {
 	int tgt_idle_tssi;
 	/* Current idle TSSI */
 	int cur_idle_tssi;
-	/* The current average TSSI.
-	 * Needs irq_lock, as it's updated in the IRQ path. */
+	/* The current average TSSI. */
 	u8 average_tssi;
 	/* Current TX power level attenuation control values */
 	struct b43_bbatt bbatt;
diff --git a/drivers/net/wireless/b43/pio.c b/drivers/net/wireless/b43/pio.c
index 3fd653c78b1..3498b68385e 100644
--- a/drivers/net/wireless/b43/pio.c
+++ b/drivers/net/wireless/b43/pio.c
@@ -32,9 +32,6 @@
 #include <linux/delay.h>
 
 
-static void b43_pio_rx_work(struct work_struct *work);
-
-
 static u16 generate_cookie(struct b43_pio_txqueue *q,
 			   struct b43_pio_txpacket *pack)
 {
@@ -144,7 +141,6 @@ static struct b43_pio_txqueue *b43_setup_pioqueue_tx(struct b43_wldev *dev,
 	q = kzalloc(sizeof(*q), GFP_KERNEL);
 	if (!q)
 		return NULL;
-	spin_lock_init(&q->lock);
 	q->dev = dev;
 	q->rev = dev->dev->id.revision;
 	q->mmio_base = index_to_pioqueue_base(dev, index) +
@@ -179,12 +175,10 @@ static struct b43_pio_rxqueue *b43_setup_pioqueue_rx(struct b43_wldev *dev,
 	q = kzalloc(sizeof(*q), GFP_KERNEL);
 	if (!q)
 		return NULL;
-	spin_lock_init(&q->lock);
 	q->dev = dev;
 	q->rev = dev->dev->id.revision;
 	q->mmio_base = index_to_pioqueue_base(dev, index) +
 		       pio_rxqueue_offset(dev);
-	INIT_WORK(&q->rx_work, b43_pio_rx_work);
 
 	/* Enable Direct FIFO RX (PIO) on the engine. */
 	b43_dma_direct_fifo_rx(dev, index, 1);
@@ -249,13 +243,6 @@ void b43_pio_free(struct b43_wldev *dev)
 	destroy_queue_tx(pio, tx_queue_AC_BK);
 }
 
-void b43_pio_stop(struct b43_wldev *dev)
-{
-	if (!b43_using_pio_transfers(dev))
-		return;
-	cancel_work_sync(&dev->pio.rx_queue->rx_work);
-}
-
 int b43_pio_init(struct b43_wldev *dev)
 {
 	struct b43_pio *pio = &dev->pio;
@@ -494,7 +481,6 @@ int b43_pio_tx(struct b43_wldev *dev, struct sk_buff *skb)
 {
 	struct b43_pio_txqueue *q;
 	struct ieee80211_hdr *hdr;
-	unsigned long flags;
 	unsigned int hdrlen, total_len;
 	int err = 0;
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
@@ -512,20 +498,18 @@ int b43_pio_tx(struct b43_wldev *dev, struct sk_buff *skb)
 		q = select_queue_by_priority(dev, skb_get_queue_mapping(skb));
 	}
 
-	spin_lock_irqsave(&q->lock, flags);
-
 	hdrlen = b43_txhdr_size(dev);
 	total_len = roundup(skb->len + hdrlen, 4);
 
 	if (unlikely(total_len > q->buffer_size)) {
 		err = -ENOBUFS;
 		b43dbg(dev->wl, "PIO: TX packet longer than queue.\n");
-		goto out_unlock;
+		goto out;
 	}
 	if (unlikely(q->free_packet_slots == 0)) {
 		err = -ENOBUFS;
 		b43warn(dev->wl, "PIO: TX packet overflow.\n");
-		goto out_unlock;
+		goto out;
 	}
 	B43_WARN_ON(q->buffer_used > q->buffer_size);
 
@@ -534,7 +518,7 @@ int b43_pio_tx(struct b43_wldev *dev, struct sk_buff *skb)
 		err = -EBUSY;
 		ieee80211_stop_queue(dev->wl->hw, skb_get_queue_mapping(skb));
 		q->stopped = 1;
-		goto out_unlock;
+		goto out;
 	}
 
 	/* Assign the queue number to the ring (if not already done before)
@@ -548,11 +532,11 @@ int b43_pio_tx(struct b43_wldev *dev, struct sk_buff *skb)
 		 * anymore and must not transmit it unencrypted. */
 		dev_kfree_skb_any(skb);
 		err = 0;
-		goto out_unlock;
+		goto out;
 	}
 	if (unlikely(err)) {
 		b43err(dev->wl, "PIO transmission failure\n");
-		goto out_unlock;
+		goto out;
 	}
 	q->nr_tx_packets++;
 
@@ -564,13 +548,10 @@ int b43_pio_tx(struct b43_wldev *dev, struct sk_buff *skb)
 		q->stopped = 1;
 	}
 
-out_unlock:
-	spin_unlock_irqrestore(&q->lock, flags);
-
+out:
 	return err;
 }
 
-/* Called with IRQs disabled. */
 void b43_pio_handle_txstatus(struct b43_wldev *dev,
 			     const struct b43_txstatus *status)
 {
@@ -584,8 +565,6 @@ void b43_pio_handle_txstatus(struct b43_wldev *dev,
 		return;
 	B43_WARN_ON(!pack);
 
-	spin_lock(&q->lock); /* IRQs are already disabled. */
-
 	info = IEEE80211_SKB_CB(pack->skb);
 
 	b43_fill_txstatus_report(dev, info, status);
@@ -603,8 +582,6 @@ void b43_pio_handle_txstatus(struct b43_wldev *dev,
 		ieee80211_wake_queue(dev->wl->hw, q->queue_prio);
 		q->stopped = 0;
 	}
-
-	spin_unlock(&q->lock);
 }
 
 void b43_pio_get_tx_stats(struct b43_wldev *dev,
@@ -612,17 +589,14 @@ void b43_pio_get_tx_stats(struct b43_wldev *dev,
 {
 	const int nr_queues = dev->wl->hw->queues;
 	struct b43_pio_txqueue *q;
-	unsigned long flags;
 	int i;
 
 	for (i = 0; i < nr_queues; i++) {
 		q = select_queue_by_priority(dev, i);
 
-		spin_lock_irqsave(&q->lock, flags);
 		stats[i].len = B43_PIO_MAX_NR_TXPACKETS - q->free_packet_slots;
 		stats[i].limit = B43_PIO_MAX_NR_TXPACKETS;
 		stats[i].count = q->nr_tx_packets;
-		spin_unlock_irqrestore(&q->lock, flags);
 	}
 }
 
@@ -760,37 +734,23 @@ rx_error:
 	return 1;
 }
 
-/* RX workqueue. We can sleep, yay! */
-static void b43_pio_rx_work(struct work_struct *work)
+void b43_pio_rx(struct b43_pio_rxqueue *q)
 {
-	struct b43_pio_rxqueue *q = container_of(work, struct b43_pio_rxqueue,
-						 rx_work);
-	unsigned int budget = 50;
+	unsigned int count = 0;
 	bool stop;
 
-	do {
-		spin_lock_irq(&q->lock);
+	while (1) {
 		stop = (pio_rx_frame(q) == 0);
-		spin_unlock_irq(&q->lock);
-		cond_resched();
 		if (stop)
 			break;
-	} while (--budget);
-}
-
-/* Called with IRQs disabled. */
-void b43_pio_rx(struct b43_pio_rxqueue *q)
-{
-	/* Due to latency issues we must run the RX path in
-	 * a workqueue to be able to schedule between packets. */
-	ieee80211_queue_work(q->dev->wl->hw, &q->rx_work);
+		cond_resched();
+		if (WARN_ON_ONCE(++count > 10000))
+			break;
+	}
 }
 
 static void b43_pio_tx_suspend_queue(struct b43_pio_txqueue *q)
 {
-	unsigned long flags;
-
-	spin_lock_irqsave(&q->lock, flags);
 	if (q->rev >= 8) {
 		b43_piotx_write32(q, B43_PIO8_TXCTL,
 				  b43_piotx_read32(q, B43_PIO8_TXCTL)
@@ -800,14 +760,10 @@ static void b43_pio_tx_suspend_queue(struct b43_pio_txqueue *q)
 				  b43_piotx_read16(q, B43_PIO_TXCTL)
 				  | B43_PIO_TXCTL_SUSPREQ);
 	}
-	spin_unlock_irqrestore(&q->lock, flags);
 }
 
 static void b43_pio_tx_resume_queue(struct b43_pio_txqueue *q)
 {
-	unsigned long flags;
-
-	spin_lock_irqsave(&q->lock, flags);
 	if (q->rev >= 8) {
 		b43_piotx_write32(q, B43_PIO8_TXCTL,
 				  b43_piotx_read32(q, B43_PIO8_TXCTL)
@@ -817,7 +773,6 @@ static void b43_pio_tx_resume_queue(struct b43_pio_txqueue *q)
 				  b43_piotx_read16(q, B43_PIO_TXCTL)
 				  & ~B43_PIO_TXCTL_SUSPREQ);
 	}
-	spin_unlock_irqrestore(&q->lock, flags);
 }
 
 void b43_pio_tx_suspend(struct b43_wldev *dev)
diff --git a/drivers/net/wireless/b43/pio.h b/drivers/net/wireless/b43/pio.h
index 6c174c91ca2..7dd649c9dda 100644
--- a/drivers/net/wireless/b43/pio.h
+++ b/drivers/net/wireless/b43/pio.h
@@ -70,7 +70,6 @@ struct b43_pio_txpacket {
 
 struct b43_pio_txqueue {
 	struct b43_wldev *dev;
-	spinlock_t lock;
 	u16 mmio_base;
 
 	/* The device queue buffer size in bytes. */
@@ -103,12 +102,8 @@ struct b43_pio_txqueue {
 
 struct b43_pio_rxqueue {
 	struct b43_wldev *dev;
-	spinlock_t lock;
 	u16 mmio_base;
 
-	/* Work to reduce latency issues on RX. */
-	struct work_struct rx_work;
-
 	/* Shortcut to the 802.11 core revision. This is to
 	 * avoid horrible pointer dereferencing in the fastpaths. */
 	u8 rev;
@@ -162,7 +157,6 @@ static inline void b43_piorx_write32(struct b43_pio_rxqueue *q,
 
 
 int b43_pio_init(struct b43_wldev *dev);
-void b43_pio_stop(struct b43_wldev *dev);
 void b43_pio_free(struct b43_wldev *dev);
 
 int b43_pio_tx(struct b43_wldev *dev, struct sk_buff *skb);
diff --git a/drivers/net/wireless/b43/sysfs.c b/drivers/net/wireless/b43/sysfs.c
index 5adaa3692d7..f1ae4e05a32 100644
--- a/drivers/net/wireless/b43/sysfs.c
+++ b/drivers/net/wireless/b43/sysfs.c
@@ -94,7 +94,6 @@ static ssize_t b43_attr_interfmode_store(struct device *dev,
 					 const char *buf, size_t count)
 {
 	struct b43_wldev *wldev = dev_to_b43_wldev(dev);
-	unsigned long flags;
 	int err;
 	int mode;
 
@@ -120,7 +119,6 @@ static ssize_t b43_attr_interfmode_store(struct device *dev,
 	}
 
 	mutex_lock(&wldev->wl->mutex);
-	spin_lock_irqsave(&wldev->wl->irq_lock, flags);
 
 	if (wldev->phy.ops->interf_mitigation) {
 		err = wldev->phy.ops->interf_mitigation(wldev, mode);
@@ -132,7 +130,6 @@ static ssize_t b43_attr_interfmode_store(struct device *dev,
 		err = -ENOSYS;
 
 	mmiowb();
-	spin_unlock_irqrestore(&wldev->wl->irq_lock, flags);
 	mutex_unlock(&wldev->wl->mutex);
 
 	return err ? err : count;
diff --git a/drivers/net/wireless/b43/xmit.c b/drivers/net/wireless/b43/xmit.c
index e7075d2c775..14f541248b5 100644
--- a/drivers/net/wireless/b43/xmit.c
+++ b/drivers/net/wireless/b43/xmit.c
@@ -267,11 +267,11 @@ int b43_generate_txhdr(struct b43_wldev *dev,
 			 */
 			ieee80211_get_tkip_key(info->control.hw_key, skb_frag,
 					IEEE80211_TKIP_P1_KEY, (u8*)phase1key);
-			/* phase1key is in host endian */
-			for (i = 0; i < 5; i++)
-				phase1key[i] = cpu_to_le16(phase1key[i]);
-
-			memcpy(txhdr->iv, phase1key, 10);
+			/* phase1key is in host endian. Copy to little-endian txhdr->iv. */
+			for (i = 0; i < 5; i++) {
+				txhdr->iv[i * 2 + 0] = phase1key[i];
+				txhdr->iv[i * 2 + 1] = phase1key[i] >> 8;
+			}
 			/* iv16 */
 			memcpy(txhdr->iv + 10, ((u8 *) wlhdr) + wlhdr_len, 3);
 		} else {
diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c
index b166a6f9f05..1d9223b3d4c 100644
--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -3106,16 +3106,20 @@ static void b43legacy_imcfglo_timeouts_workaround(struct b43legacy_wldev *dev)
 	    bus->pcicore.dev->id.revision <= 5) {
 		/* IMCFGLO timeouts workaround. */
 		tmp = ssb_read32(dev->dev, SSB_IMCFGLO);
-		tmp &= ~SSB_IMCFGLO_REQTO;
-		tmp &= ~SSB_IMCFGLO_SERTO;
 		switch (bus->bustype) {
 		case SSB_BUSTYPE_PCI:
 		case SSB_BUSTYPE_PCMCIA:
+			tmp &= ~SSB_IMCFGLO_REQTO;
+			tmp &= ~SSB_IMCFGLO_SERTO;
 			tmp |= 0x32;
 			break;
 		case SSB_BUSTYPE_SSB:
+			tmp &= ~SSB_IMCFGLO_REQTO;
+			tmp &= ~SSB_IMCFGLO_SERTO;
 			tmp |= 0x53;
 			break;
+		default:
+			break;
 		}
 		ssb_write32(dev->dev, SSB_IMCFGLO, tmp);
 	}
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c
index 164df9347a2..798f625e38f 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
@@ -331,9 +331,8 @@ static void rt2400pci_config_erp(struct rt2x00_dev *rt2x00dev,
 	preamble_mask = erp->short_preamble << 3;
 
 	rt2x00pci_register_read(rt2x00dev, TXCSR1, &reg);
-	rt2x00_set_field32(&reg, TXCSR1_ACK_TIMEOUT, erp->ack_timeout);
-	rt2x00_set_field32(&reg, TXCSR1_ACK_CONSUME_TIME,
-			   erp->ack_consume_time);
+	rt2x00_set_field32(&reg, TXCSR1_ACK_TIMEOUT, 0x1ff);
+	rt2x00_set_field32(&reg, TXCSR1_ACK_CONSUME_TIME, 0x13a);
 	rt2x00_set_field32(&reg, TXCSR1_TSF_OFFSET, IEEE80211_HEADER);
 	rt2x00_set_field32(&reg, TXCSR1_AUTORESPONDER, 1);
 	rt2x00pci_register_write(rt2x00dev, TXCSR1, reg);
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index 4186582f277..2e872ac6982 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -337,9 +337,8 @@ static void rt2500pci_config_erp(struct rt2x00_dev *rt2x00dev,
 	preamble_mask = erp->short_preamble << 3;
 
 	rt2x00pci_register_read(rt2x00dev, TXCSR1, &reg);
-	rt2x00_set_field32(&reg, TXCSR1_ACK_TIMEOUT, erp->ack_timeout);
-	rt2x00_set_field32(&reg, TXCSR1_ACK_CONSUME_TIME,
-			   erp->ack_consume_time);
+	rt2x00_set_field32(&reg, TXCSR1_ACK_TIMEOUT, 0x162);
+	rt2x00_set_field32(&reg, TXCSR1_ACK_CONSUME_TIME, 0xa2);
 	rt2x00_set_field32(&reg, TXCSR1_TSF_OFFSET, IEEE80211_HEADER);
 	rt2x00_set_field32(&reg, TXCSR1_AUTORESPONDER, 1);
 	rt2x00pci_register_write(rt2x00dev, TXCSR1, reg);
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index b04f59bab3b..22dd6d9e298 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -488,10 +488,6 @@ static void rt2500usb_config_erp(struct rt2x00_dev *rt2x00dev,
 {
 	u16 reg;
 
-	rt2500usb_register_read(rt2x00dev, TXRX_CSR1, &reg);
-	rt2x00_set_field16(&reg, TXRX_CSR1_ACK_TIMEOUT, erp->ack_timeout);
-	rt2500usb_register_write(rt2x00dev, TXRX_CSR1, reg);
-
 	rt2500usb_register_read(rt2x00dev, TXRX_CSR10, &reg);
 	rt2x00_set_field16(&reg, TXRX_CSR10_AUTORESPOND_PREAMBLE,
 			   !!erp->short_preamble);
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index 639dc6cc04b..a084077a1c6 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -580,8 +580,7 @@ static void rt2800usb_config_erp(struct rt2x00_dev *rt2x00dev,
 	u32 reg;
 
 	rt2x00usb_register_read(rt2x00dev, TX_TIMEOUT_CFG, &reg);
-	rt2x00_set_field32(&reg, TX_TIMEOUT_CFG_RX_ACK_TIMEOUT,
-			   DIV_ROUND_UP(erp->ack_timeout, erp->slot_time));
+	rt2x00_set_field32(&reg, TX_TIMEOUT_CFG_RX_ACK_TIMEOUT, 0x20);
 	rt2x00usb_register_write(rt2x00dev, TX_TIMEOUT_CFG, reg);
 
 	rt2x00usb_register_read(rt2x00dev, AUTO_RSP_CFG, &reg);
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 555a777db6d..27bc6b7fbfd 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -417,9 +417,6 @@ struct rt2x00lib_erp {
 	int short_preamble;
 	int cts_protection;
 
-	int ack_timeout;
-	int ack_consume_time;
-
 	u32 basic_rates;
 
 	int slot_time;
diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c
index 3501788ab49..40a201e2e15 100644
--- a/drivers/net/wireless/rt2x00/rt2x00config.c
+++ b/drivers/net/wireless/rt2x00/rt2x00config.c
@@ -94,17 +94,6 @@ void rt2x00lib_config_erp(struct rt2x00_dev *rt2x00dev,
 	erp.difs = bss_conf->use_short_slot ? SHORT_DIFS : DIFS;
 	erp.eifs = bss_conf->use_short_slot ? SHORT_EIFS : EIFS;
 
-	erp.ack_timeout = PLCP + erp.difs + GET_DURATION(ACK_SIZE, 10);
-	erp.ack_consume_time = SIFS + PLCP + GET_DURATION(ACK_SIZE, 10);
-
-	if (bss_conf->use_short_preamble) {
-		erp.ack_timeout += SHORT_PREAMBLE;
-		erp.ack_consume_time += SHORT_PREAMBLE;
-	} else {
-		erp.ack_timeout += PREAMBLE;
-		erp.ack_consume_time += PREAMBLE;
-	}
-
 	erp.basic_rates = bss_conf->basic_rates;
 	erp.beacon_int = bss_conf->beacon_int;
 
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index f4b4b86da4d..b20e3eac9d6 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -598,7 +598,7 @@ static void rt61pci_config_erp(struct rt2x00_dev *rt2x00dev,
 	u32 reg;
 
 	rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, &reg);
-	rt2x00_set_field32(&reg, TXRX_CSR0_RX_ACK_TIMEOUT, erp->ack_timeout);
+	rt2x00_set_field32(&reg, TXRX_CSR0_RX_ACK_TIMEOUT, 0x32);
 	rt2x00_set_field32(&reg, TXRX_CSR0_TSF_OFFSET, IEEE80211_HEADER);
 	rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg);
 
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index 90e11726305..1cbd9b4a3ef 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -561,7 +561,7 @@ static void rt73usb_config_erp(struct rt2x00_dev *rt2x00dev,
 	u32 reg;
 
 	rt2x00usb_register_read(rt2x00dev, TXRX_CSR0, &reg);
-	rt2x00_set_field32(&reg, TXRX_CSR0_RX_ACK_TIMEOUT, erp->ack_timeout);
+	rt2x00_set_field32(&reg, TXRX_CSR0_RX_ACK_TIMEOUT, 0x32);
 	rt2x00_set_field32(&reg, TXRX_CSR0_TSF_OFFSET, IEEE80211_HEADER);
 	rt2x00usb_register_write(rt2x00dev, TXRX_CSR0, reg);
 
diff --git a/drivers/ssb/Kconfig b/drivers/ssb/Kconfig
index 540a2948596..2d8cc455dbc 100644
--- a/drivers/ssb/Kconfig
+++ b/drivers/ssb/Kconfig
@@ -66,6 +66,20 @@ config SSB_PCMCIAHOST
 
 	  If unsure, say N
 
+config SSB_SDIOHOST_POSSIBLE
+	bool
+	depends on SSB && (MMC = y || MMC = SSB)
+	default y
+
+config SSB_SDIOHOST
+	bool "Support for SSB on SDIO-bus host"
+	depends on SSB_SDIOHOST_POSSIBLE
+	help
+	  Support for a Sonics Silicon Backplane on top
+	  of a SDIO device.
+
+	  If unsure, say N
+
 config SSB_SILENT
 	bool "No SSB kernel messages"
 	depends on SSB && EMBEDDED
diff --git a/drivers/ssb/Makefile b/drivers/ssb/Makefile
index cfbb74f2982..656e58b9261 100644
--- a/drivers/ssb/Makefile
+++ b/drivers/ssb/Makefile
@@ -6,6 +6,7 @@ ssb-$(CONFIG_SSB_SPROM)			+= sprom.o
 # host support
 ssb-$(CONFIG_SSB_PCIHOST)		+= pci.o pcihost_wrapper.o
 ssb-$(CONFIG_SSB_PCMCIAHOST)		+= pcmcia.o
+ssb-$(CONFIG_SSB_SDIOHOST)		+= sdio.o
 
 # built-in drivers
 ssb-y					+= driver_chipcommon.o
diff --git a/drivers/ssb/main.c b/drivers/ssb/main.c
index 65a1ed951a1..579b114be41 100644
--- a/drivers/ssb/main.c
+++ b/drivers/ssb/main.c
@@ -17,6 +17,7 @@
 #include <linux/ssb/ssb_driver_gige.h>
 #include <linux/dma-mapping.h>
 #include <linux/pci.h>
+#include <linux/mmc/sdio_func.h>
 
 #include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
@@ -88,6 +89,25 @@ found:
 }
 #endif /* CONFIG_SSB_PCMCIAHOST */
 
+#ifdef CONFIG_SSB_SDIOHOST
+struct ssb_bus *ssb_sdio_func_to_bus(struct sdio_func *func)
+{
+	struct ssb_bus *bus;
+
+	ssb_buses_lock();
+	list_for_each_entry(bus, &buses, list) {
+		if (bus->bustype == SSB_BUSTYPE_SDIO &&
+		    bus->host_sdio == func)
+			goto found;
+	}
+	bus = NULL;
+found:
+	ssb_buses_unlock();
+
+	return bus;
+}
+#endif /* CONFIG_SSB_SDIOHOST */
+
 int ssb_for_each_bus_call(unsigned long data,
 			  int (*func)(struct ssb_bus *bus, unsigned long data))
 {
@@ -469,6 +489,12 @@ static int ssb_devices_register(struct ssb_bus *bus)
 			dev->parent = &bus->host_pcmcia->dev;
 #endif
 			break;
+		case SSB_BUSTYPE_SDIO:
+#ifdef CONFIG_SSB_SDIO
+			sdev->irq = bus->host_sdio->dev.irq;
+			dev->parent = &bus->host_sdio->dev;
+#endif
+			break;
 		case SSB_BUSTYPE_SSB:
 			dev->dma_mask = &dev->coherent_dma_mask;
 			break;
@@ -724,12 +750,18 @@ static int ssb_bus_register(struct ssb_bus *bus,
 	err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1);
 	if (err)
 		goto out;
+
+	/* Init SDIO-host device (if any), before the scan */
+	err = ssb_sdio_init(bus);
+	if (err)
+		goto err_disable_xtal;
+
 	ssb_buses_lock();
 	bus->busnumber = next_busnumber;
 	/* Scan for devices (cores) */
 	err = ssb_bus_scan(bus, baseaddr);
 	if (err)
-		goto err_disable_xtal;
+		goto err_sdio_exit;
 
 	/* Init PCI-host device (if any) */
 	err = ssb_pci_init(bus);
@@ -776,6 +808,8 @@ err_pci_exit:
 	ssb_pci_exit(bus);
 err_unmap:
 	ssb_iounmap(bus);
+err_sdio_exit:
+	ssb_sdio_exit(bus);
 err_disable_xtal:
 	ssb_buses_unlock();
 	ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0);
@@ -825,6 +859,28 @@ int ssb_bus_pcmciabus_register(struct ssb_bus *bus,
 EXPORT_SYMBOL(ssb_bus_pcmciabus_register);
 #endif /* CONFIG_SSB_PCMCIAHOST */
 
+#ifdef CONFIG_SSB_SDIOHOST
+int ssb_bus_sdiobus_register(struct ssb_bus *bus, struct sdio_func *func,
+			     unsigned int quirks)
+{
+	int err;
+
+	bus->bustype = SSB_BUSTYPE_SDIO;
+	bus->host_sdio = func;
+	bus->ops = &ssb_sdio_ops;
+	bus->quirks = quirks;
+
+	err = ssb_bus_register(bus, ssb_sdio_get_invariants, ~0);
+	if (!err) {
+		ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
+			   "SDIO device %s\n", sdio_func_id(func));
+	}
+
+	return err;
+}
+EXPORT_SYMBOL(ssb_bus_sdiobus_register);
+#endif /* CONFIG_SSB_PCMCIAHOST */
+
 int ssb_bus_ssbbus_register(struct ssb_bus *bus,
 			    unsigned long baseaddr,
 			    ssb_invariants_func_t get_invariants)
@@ -1358,8 +1414,10 @@ static int __init ssb_modinit(void)
 	ssb_buses_lock();
 	err = ssb_attach_queued_buses();
 	ssb_buses_unlock();
-	if (err)
+	if (err) {
 		bus_unregister(&ssb_bustype);
+		goto out;
+	}
 
 	err = b43_pci_ssb_bridge_init();
 	if (err) {
@@ -1375,7 +1433,7 @@ static int __init ssb_modinit(void)
 		/* don't fail SSB init because of this */
 		err = 0;
 	}
-
+out:
 	return err;
 }
 /* ssb must be initialized after PCI but before the ssb drivers.
diff --git a/drivers/ssb/scan.c b/drivers/ssb/scan.c
index 63ee5cfbefb..b74212d698c 100644
--- a/drivers/ssb/scan.c
+++ b/drivers/ssb/scan.c
@@ -175,6 +175,9 @@ static u32 scan_read32(struct ssb_bus *bus, u8 current_coreidx,
 		} else
 			ssb_pcmcia_switch_segment(bus, 0);
 		break;
+	case SSB_BUSTYPE_SDIO:
+		offset += current_coreidx * SSB_CORE_SIZE;
+		return ssb_sdio_scan_read32(bus, offset);
 	}
 	return readl(bus->mmio + offset);
 }
@@ -188,6 +191,8 @@ static int scan_switchcore(struct ssb_bus *bus, u8 coreidx)
 		return ssb_pci_switch_coreidx(bus, coreidx);
 	case SSB_BUSTYPE_PCMCIA:
 		return ssb_pcmcia_switch_coreidx(bus, coreidx);
+	case SSB_BUSTYPE_SDIO:
+		return ssb_sdio_scan_switch_coreidx(bus, coreidx);
 	}
 	return 0;
 }
@@ -206,6 +211,8 @@ void ssb_iounmap(struct ssb_bus *bus)
 		SSB_BUG_ON(1); /* Can't reach this code. */
 #endif
 		break;
+	case SSB_BUSTYPE_SDIO:
+		break;
 	}
 	bus->mmio = NULL;
 	bus->mapped_device = NULL;
@@ -230,6 +237,10 @@ static void __iomem *ssb_ioremap(struct ssb_bus *bus,
 		SSB_BUG_ON(1); /* Can't reach this code. */
 #endif
 		break;
+	case SSB_BUSTYPE_SDIO:
+		/* Nothing to ioremap in the SDIO case, just fake it */
+		mmio = (void __iomem *)baseaddr;
+		break;
 	}
 
 	return mmio;
diff --git a/drivers/ssb/sdio.c b/drivers/ssb/sdio.c
new file mode 100644
index 00000000000..114051056b5
--- /dev/null
+++ b/drivers/ssb/sdio.c
@@ -0,0 +1,610 @@
+/*
+ * Sonics Silicon Backplane
+ * SDIO-Hostbus related functions
+ *
+ * Copyright 2009 Albert Herranz <albert_herranz@yahoo.es>
+ *
+ * Based on drivers/ssb/pcmcia.c
+ * Copyright 2006 Johannes Berg <johannes@sipsolutions.net>
+ * Copyright 2007-2008 Michael Buesch <mb@bu3sch.de>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ *
+ */
+
+#include <linux/ssb/ssb.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/etherdevice.h>
+#include <linux/mmc/sdio_func.h>
+
+#include "ssb_private.h"
+
+/* Define the following to 1 to enable a printk on each coreswitch. */
+#define SSB_VERBOSE_SDIOCORESWITCH_DEBUG		1
+
+
+/* Hardware invariants CIS tuples */
+#define SSB_SDIO_CIS			0x80
+#define  SSB_SDIO_CIS_SROMREV		0x00
+#define  SSB_SDIO_CIS_ID		0x01
+#define  SSB_SDIO_CIS_BOARDREV		0x02
+#define  SSB_SDIO_CIS_PA		0x03
+#define   SSB_SDIO_CIS_PA_PA0B0_LO	0
+#define   SSB_SDIO_CIS_PA_PA0B0_HI	1
+#define   SSB_SDIO_CIS_PA_PA0B1_LO	2
+#define   SSB_SDIO_CIS_PA_PA0B1_HI	3
+#define   SSB_SDIO_CIS_PA_PA0B2_LO	4
+#define   SSB_SDIO_CIS_PA_PA0B2_HI	5
+#define   SSB_SDIO_CIS_PA_ITSSI		6
+#define   SSB_SDIO_CIS_PA_MAXPOW	7
+#define  SSB_SDIO_CIS_OEMNAME		0x04
+#define  SSB_SDIO_CIS_CCODE		0x05
+#define  SSB_SDIO_CIS_ANTENNA		0x06
+#define  SSB_SDIO_CIS_ANTGAIN		0x07
+#define  SSB_SDIO_CIS_BFLAGS		0x08
+#define  SSB_SDIO_CIS_LEDS		0x09
+
+#define CISTPL_FUNCE_LAN_NODE_ID        0x04	/* same as in PCMCIA */
+
+
+/*
+ * Function 1 miscellaneous registers.
+ *
+ * Definitions match src/include/sbsdio.h from the
+ * Android Open Source Project
+ * http://android.git.kernel.org/?p=platform/system/wlan/broadcom.git
+ *
+ */
+#define SBSDIO_FUNC1_SBADDRLOW	0x1000a	/* SB Address window Low (b15) */
+#define SBSDIO_FUNC1_SBADDRMID	0x1000b	/* SB Address window Mid (b23-b16) */
+#define SBSDIO_FUNC1_SBADDRHIGH	0x1000c	/* SB Address window High (b24-b31) */
+
+/* valid bits in SBSDIO_FUNC1_SBADDRxxx regs */
+#define SBSDIO_SBADDRLOW_MASK	0x80	/* Valid address bits in SBADDRLOW */
+#define SBSDIO_SBADDRMID_MASK	0xff	/* Valid address bits in SBADDRMID */
+#define SBSDIO_SBADDRHIGH_MASK	0xff	/* Valid address bits in SBADDRHIGH */
+
+#define SBSDIO_SB_OFT_ADDR_MASK	0x7FFF	/* sb offset addr is <= 15 bits, 32k */
+
+/* REVISIT: this flag doesn't seem to matter */
+#define SBSDIO_SB_ACCESS_2_4B_FLAG	0x8000	/* forces 32-bit SB access */
+
+
+/*
+ * Address map within the SDIO function address space (128K).
+ *
+ *   Start   End     Description
+ *   ------- ------- ------------------------------------------
+ *   0x00000 0x0ffff selected backplane address window (64K)
+ *   0x10000 0x1ffff backplane control registers (max 64K)
+ *
+ * The current address window is configured by writing to registers
+ * SBADDRLOW, SBADDRMID and SBADDRHIGH.
+ *
+ * In order to access the contents of a 32-bit Silicon Backplane address
+ * the backplane address window must be first loaded with the highest
+ * 16 bits of the target address. Then, an access must be done to the
+ * SDIO function address space using the lower 15 bits of the address.
+ * Bit 15 of the address must be set when doing 32 bit accesses.
+ *
+ * 10987654321098765432109876543210
+ * WWWWWWWWWWWWWWWWW                 SB Address Window
+ *                 OOOOOOOOOOOOOOOO  Offset within SB Address Window
+ *                 a                 32-bit access flag
+ */
+
+
+/*
+ * SSB I/O via SDIO.
+ *
+ * NOTE: SDIO address @addr is 17 bits long (SDIO address space is 128K).
+ */
+
+static inline struct device *ssb_sdio_dev(struct ssb_bus *bus)
+{
+	return &bus->host_sdio->dev;
+}
+
+/* host claimed */
+static int ssb_sdio_writeb(struct ssb_bus *bus, unsigned int addr, u8 val)
+{
+	int error = 0;
+
+	sdio_writeb(bus->host_sdio, val, addr, &error);
+	if (unlikely(error)) {
+		dev_dbg(ssb_sdio_dev(bus), "%08X <- %02x, error %d\n",
+			addr, val, error);
+	}
+
+	return error;
+}
+
+#if 0
+static u8 ssb_sdio_readb(struct ssb_bus *bus, unsigned int addr)
+{
+	u8 val;
+	int error = 0;
+
+	val = sdio_readb(bus->host_sdio, addr, &error);
+	if (unlikely(error)) {
+		dev_dbg(ssb_sdio_dev(bus), "%08X -> %02x, error %d\n",
+			addr, val, error);
+	}
+
+	return val;
+}
+#endif
+
+/* host claimed */
+static int ssb_sdio_set_sbaddr_window(struct ssb_bus *bus, u32 address)
+{
+	int error;
+
+	error = ssb_sdio_writeb(bus, SBSDIO_FUNC1_SBADDRLOW,
+				(address >> 8) & SBSDIO_SBADDRLOW_MASK);
+	if (error)
+		goto out;
+	error = ssb_sdio_writeb(bus, SBSDIO_FUNC1_SBADDRMID,
+				(address >> 16) & SBSDIO_SBADDRMID_MASK);
+	if (error)
+		goto out;
+	error = ssb_sdio_writeb(bus, SBSDIO_FUNC1_SBADDRHIGH,
+				(address >> 24) & SBSDIO_SBADDRHIGH_MASK);
+	if (error)
+		goto out;
+	bus->sdio_sbaddr = address;
+out:
+	if (error) {
+		dev_dbg(ssb_sdio_dev(bus), "failed to set address window"
+			" to 0x%08x, error %d\n", address, error);
+	}
+
+	return error;
+}
+
+/* for enumeration use only */
+u32 ssb_sdio_scan_read32(struct ssb_bus *bus, u16 offset)
+{
+	u32 val;
+	int error;
+
+	sdio_claim_host(bus->host_sdio);
+	val = sdio_readl(bus->host_sdio, offset, &error);
+	sdio_release_host(bus->host_sdio);
+	if (unlikely(error)) {
+		dev_dbg(ssb_sdio_dev(bus), "%04X:%04X > %08x, error %d\n",
+			bus->sdio_sbaddr >> 16, offset, val, error);
+	}
+
+	return val;
+}
+
+/* for enumeration use only */
+int ssb_sdio_scan_switch_coreidx(struct ssb_bus *bus, u8 coreidx)
+{
+	u32 sbaddr;
+	int error;
+
+	sbaddr = (coreidx * SSB_CORE_SIZE) + SSB_ENUM_BASE;
+	sdio_claim_host(bus->host_sdio);
+	error = ssb_sdio_set_sbaddr_window(bus, sbaddr);
+	sdio_release_host(bus->host_sdio);
+	if (error) {
+		dev_err(ssb_sdio_dev(bus), "failed to switch to core %u,"
+			" error %d\n", coreidx, error);
+		goto out;
+	}
+out:
+	return error;
+}
+
+/* host must be already claimed */
+int ssb_sdio_switch_core(struct ssb_bus *bus, struct ssb_device *dev)
+{
+	u8 coreidx = dev->core_index;
+	u32 sbaddr;
+	int error = 0;
+
+	sbaddr = (coreidx * SSB_CORE_SIZE) + SSB_ENUM_BASE;
+	if (unlikely(bus->sdio_sbaddr != sbaddr)) {
+#if SSB_VERBOSE_SDIOCORESWITCH_DEBUG
+		dev_info(ssb_sdio_dev(bus),
+			   "switching to %s core, index %d\n",
+			   ssb_core_name(dev->id.coreid), coreidx);
+#endif
+		error = ssb_sdio_set_sbaddr_window(bus, sbaddr);
+		if (error) {
+			dev_dbg(ssb_sdio_dev(bus), "failed to switch to"
+				" core %u, error %d\n", coreidx, error);
+			goto out;
+		}
+		bus->mapped_device = dev;
+	}
+
+out:
+	return error;
+}
+
+static u8 ssb_sdio_read8(struct ssb_device *dev, u16 offset)
+{
+	struct ssb_bus *bus = dev->bus;
+	u8 val = 0xff;
+	int error = 0;
+
+	sdio_claim_host(bus->host_sdio);
+	if (unlikely(ssb_sdio_switch_core(bus, dev)))
+		goto out;
+	offset |= bus->sdio_sbaddr & 0xffff;
+	offset &= SBSDIO_SB_OFT_ADDR_MASK;
+	val = sdio_readb(bus->host_sdio, offset, &error);
+	if (error) {
+		dev_dbg(ssb_sdio_dev(bus), "%04X:%04X > %02x, error %d\n",
+			bus->sdio_sbaddr >> 16, offset, val, error);
+	}
+out:
+	sdio_release_host(bus->host_sdio);
+
+	return val;
+}
+
+static u16 ssb_sdio_read16(struct ssb_device *dev, u16 offset)
+{
+	struct ssb_bus *bus = dev->bus;
+	u16 val = 0xffff;
+	int error = 0;
+
+	sdio_claim_host(bus->host_sdio);
+	if (unlikely(ssb_sdio_switch_core(bus, dev)))
+		goto out;
+	offset |= bus->sdio_sbaddr & 0xffff;
+	offset &= SBSDIO_SB_OFT_ADDR_MASK;
+	val = sdio_readw(bus->host_sdio, offset, &error);
+	if (error) {
+		dev_dbg(ssb_sdio_dev(bus), "%04X:%04X > %04x, error %d\n",
+			bus->sdio_sbaddr >> 16, offset, val, error);
+	}
+out:
+	sdio_release_host(bus->host_sdio);
+
+	return val;
+}
+
+static u32 ssb_sdio_read32(struct ssb_device *dev, u16 offset)
+{
+	struct ssb_bus *bus = dev->bus;
+	u32 val = 0xffffffff;
+	int error = 0;
+
+	sdio_claim_host(bus->host_sdio);
+	if (unlikely(ssb_sdio_switch_core(bus, dev)))
+		goto out;
+	offset |= bus->sdio_sbaddr & 0xffff;
+	offset &= SBSDIO_SB_OFT_ADDR_MASK;
+	offset |= SBSDIO_SB_ACCESS_2_4B_FLAG;	/* 32 bit data access */
+	val = sdio_readl(bus->host_sdio, offset, &error);
+	if (error) {
+		dev_dbg(ssb_sdio_dev(bus), "%04X:%04X > %08x, error %d\n",
+			bus->sdio_sbaddr >> 16, offset, val, error);
+	}
+out:
+	sdio_release_host(bus->host_sdio);
+
+	return val;
+}
+
+#ifdef CONFIG_SSB_BLOCKIO
+static void ssb_sdio_block_read(struct ssb_device *dev, void *buffer,
+				  size_t count, u16 offset, u8 reg_width)
+{
+	size_t saved_count = count;
+	struct ssb_bus *bus = dev->bus;
+	int error = 0;
+
+	sdio_claim_host(bus->host_sdio);
+	if (unlikely(ssb_sdio_switch_core(bus, dev))) {
+		error = -EIO;
+		memset(buffer, 0xff, count);
+		goto err_out;
+	}
+	offset |= bus->sdio_sbaddr & 0xffff;
+	offset &= SBSDIO_SB_OFT_ADDR_MASK;
+
+	switch (reg_width) {
+	case sizeof(u8): {
+		error = sdio_readsb(bus->host_sdio, buffer, offset, count);
+		break;
+	}
+	case sizeof(u16): {
+		SSB_WARN_ON(count & 1);
+		error = sdio_readsb(bus->host_sdio, buffer, offset, count);
+		break;
+	}
+	case sizeof(u32): {
+		SSB_WARN_ON(count & 3);
+		offset |= SBSDIO_SB_ACCESS_2_4B_FLAG;	/* 32 bit data access */
+		error = sdio_readsb(bus->host_sdio, buffer, offset, count);
+		break;
+	}
+	default:
+		SSB_WARN_ON(1);
+	}
+	if (!error)
+		goto out;
+
+err_out:
+	dev_dbg(ssb_sdio_dev(bus), "%04X:%04X (width=%u, len=%u), error %d\n",
+		bus->sdio_sbaddr >> 16, offset, reg_width, saved_count, error);
+out:
+	sdio_release_host(bus->host_sdio);
+}
+#endif /* CONFIG_SSB_BLOCKIO */
+
+static void ssb_sdio_write8(struct ssb_device *dev, u16 offset, u8 val)
+{
+	struct ssb_bus *bus = dev->bus;
+	int error = 0;
+
+	sdio_claim_host(bus->host_sdio);
+	if (unlikely(ssb_sdio_switch_core(bus, dev)))
+		goto out;
+	offset |= bus->sdio_sbaddr & 0xffff;
+	offset &= SBSDIO_SB_OFT_ADDR_MASK;
+	sdio_writeb(bus->host_sdio, val, offset, &error);
+	if (error) {
+		dev_dbg(ssb_sdio_dev(bus), "%04X:%04X < %02x, error %d\n",
+			bus->sdio_sbaddr >> 16, offset, val, error);
+	}
+out:
+	sdio_release_host(bus->host_sdio);
+}
+
+static void ssb_sdio_write16(struct ssb_device *dev, u16 offset, u16 val)
+{
+	struct ssb_bus *bus = dev->bus;
+	int error = 0;
+
+	sdio_claim_host(bus->host_sdio);
+	if (unlikely(ssb_sdio_switch_core(bus, dev)))
+		goto out;
+	offset |= bus->sdio_sbaddr & 0xffff;
+	offset &= SBSDIO_SB_OFT_ADDR_MASK;
+	sdio_writew(bus->host_sdio, val, offset, &error);
+	if (error) {
+		dev_dbg(ssb_sdio_dev(bus), "%04X:%04X < %04x, error %d\n",
+			bus->sdio_sbaddr >> 16, offset, val, error);
+	}
+out:
+	sdio_release_host(bus->host_sdio);
+}
+
+static void ssb_sdio_write32(struct ssb_device *dev, u16 offset, u32 val)
+{
+	struct ssb_bus *bus = dev->bus;
+	int error = 0;
+
+	sdio_claim_host(bus->host_sdio);
+	if (unlikely(ssb_sdio_switch_core(bus, dev)))
+		goto out;
+	offset |= bus->sdio_sbaddr & 0xffff;
+	offset &= SBSDIO_SB_OFT_ADDR_MASK;
+	offset |= SBSDIO_SB_ACCESS_2_4B_FLAG;	/* 32 bit data access */
+	sdio_writel(bus->host_sdio, val, offset, &error);
+	if (error) {
+		dev_dbg(ssb_sdio_dev(bus), "%04X:%04X < %08x, error %d\n",
+			bus->sdio_sbaddr >> 16, offset, val, error);
+	}
+	if (bus->quirks & SSB_QUIRK_SDIO_READ_AFTER_WRITE32)
+		sdio_readl(bus->host_sdio, 0, &error);
+out:
+	sdio_release_host(bus->host_sdio);
+}
+
+#ifdef CONFIG_SSB_BLOCKIO
+static void ssb_sdio_block_write(struct ssb_device *dev, const void *buffer,
+				   size_t count, u16 offset, u8 reg_width)
+{
+	size_t saved_count = count;
+	struct ssb_bus *bus = dev->bus;
+	int error = 0;
+
+	sdio_claim_host(bus->host_sdio);
+	if (unlikely(ssb_sdio_switch_core(bus, dev))) {
+		error = -EIO;
+		memset((void *)buffer, 0xff, count);
+		goto err_out;
+	}
+	offset |= bus->sdio_sbaddr & 0xffff;
+	offset &= SBSDIO_SB_OFT_ADDR_MASK;
+
+	switch (reg_width) {
+	case sizeof(u8):
+		error = sdio_writesb(bus->host_sdio, offset,
+				     (void *)buffer, count);
+		break;
+	case sizeof(u16):
+		SSB_WARN_ON(count & 1);
+		error = sdio_writesb(bus->host_sdio, offset,
+				     (void *)buffer, count);
+		break;
+	case sizeof(u32):
+		SSB_WARN_ON(count & 3);
+		offset |= SBSDIO_SB_ACCESS_2_4B_FLAG;	/* 32 bit data access */
+		error = sdio_writesb(bus->host_sdio, offset,
+				     (void *)buffer, count);
+		break;
+	default:
+		SSB_WARN_ON(1);
+	}
+	if (!error)
+		goto out;
+
+err_out:
+	dev_dbg(ssb_sdio_dev(bus), "%04X:%04X (width=%u, len=%u), error %d\n",
+		bus->sdio_sbaddr >> 16, offset, reg_width, saved_count, error);
+out:
+	sdio_release_host(bus->host_sdio);
+}
+
+#endif /* CONFIG_SSB_BLOCKIO */
+
+/* Not "static", as it's used in main.c */
+const struct ssb_bus_ops ssb_sdio_ops = {
+	.read8		= ssb_sdio_read8,
+	.read16		= ssb_sdio_read16,
+	.read32		= ssb_sdio_read32,
+	.write8		= ssb_sdio_write8,
+	.write16	= ssb_sdio_write16,
+	.write32	= ssb_sdio_write32,
+#ifdef CONFIG_SSB_BLOCKIO
+	.block_read	= ssb_sdio_block_read,
+	.block_write	= ssb_sdio_block_write,
+#endif
+};
+
+#define GOTO_ERROR_ON(condition, description) do {	\
+	if (unlikely(condition)) {			\
+		error_description = description;	\
+		goto error;				\
+	}						\
+  } while (0)
+
+int ssb_sdio_get_invariants(struct ssb_bus *bus,
+			    struct ssb_init_invariants *iv)
+{
+	struct ssb_sprom *sprom = &iv->sprom;
+	struct ssb_boardinfo *bi = &iv->boardinfo;
+	const char *error_description = "none";
+	struct sdio_func_tuple *tuple;
+	void *mac;
+
+	memset(sprom, 0xFF, sizeof(*sprom));
+	sprom->boardflags_lo = 0;
+	sprom->boardflags_hi = 0;
+
+	tuple = bus->host_sdio->tuples;
+	while (tuple) {
+		switch (tuple->code) {
+		case 0x22: /* extended function */
+			switch (tuple->data[0]) {
+			case CISTPL_FUNCE_LAN_NODE_ID:
+				GOTO_ERROR_ON((tuple->size != 7) &&
+					      (tuple->data[1] != 6),
+					      "mac tpl size");
+				/* fetch the MAC address. */
+				mac = tuple->data + 2;
+				memcpy(sprom->il0mac, mac, ETH_ALEN);
+				memcpy(sprom->et1mac, mac, ETH_ALEN);
+				break;
+			default:
+				break;
+			}
+			break;
+		case 0x80: /* vendor specific tuple */
+			switch (tuple->data[0]) {
+			case SSB_SDIO_CIS_SROMREV:
+				GOTO_ERROR_ON(tuple->size != 2,
+					      "sromrev tpl size");
+				sprom->revision = tuple->data[1];
+				break;
+			case SSB_SDIO_CIS_ID:
+				GOTO_ERROR_ON((tuple->size != 5) &&
+					      (tuple->size != 7),
+					      "id tpl size");
+				bi->vendor = tuple->data[1] |
+					     (tuple->data[2]<<8);
+				break;
+			case SSB_SDIO_CIS_BOARDREV:
+				GOTO_ERROR_ON(tuple->size != 2,
+					      "boardrev tpl size");
+				sprom->board_rev = tuple->data[1];
+				break;
+			case SSB_SDIO_CIS_PA:
+				GOTO_ERROR_ON((tuple->size != 9) &&
+					      (tuple->size != 10),
+					      "pa tpl size");
+				sprom->pa0b0 = tuple->data[1] |
+					 ((u16)tuple->data[2] << 8);
+				sprom->pa0b1 = tuple->data[3] |
+					 ((u16)tuple->data[4] << 8);
+				sprom->pa0b2 = tuple->data[5] |
+					 ((u16)tuple->data[6] << 8);
+				sprom->itssi_a = tuple->data[7];
+				sprom->itssi_bg = tuple->data[7];
+				sprom->maxpwr_a = tuple->data[8];
+				sprom->maxpwr_bg = tuple->data[8];
+				break;
+			case SSB_SDIO_CIS_OEMNAME:
+				/* Not present */
+				break;
+			case SSB_SDIO_CIS_CCODE:
+				GOTO_ERROR_ON(tuple->size != 2,
+					      "ccode tpl size");
+				sprom->country_code = tuple->data[1];
+				break;
+			case SSB_SDIO_CIS_ANTENNA:
+				GOTO_ERROR_ON(tuple->size != 2,
+					      "ant tpl size");
+				sprom->ant_available_a = tuple->data[1];
+				sprom->ant_available_bg = tuple->data[1];
+				break;
+			case SSB_SDIO_CIS_ANTGAIN:
+				GOTO_ERROR_ON(tuple->size != 2,
+					      "antg tpl size");
+				sprom->antenna_gain.ghz24.a0 = tuple->data[1];
+				sprom->antenna_gain.ghz24.a1 = tuple->data[1];
+				sprom->antenna_gain.ghz24.a2 = tuple->data[1];
+				sprom->antenna_gain.ghz24.a3 = tuple->data[1];
+				sprom->antenna_gain.ghz5.a0 = tuple->data[1];
+				sprom->antenna_gain.ghz5.a1 = tuple->data[1];
+				sprom->antenna_gain.ghz5.a2 = tuple->data[1];
+				sprom->antenna_gain.ghz5.a3 = tuple->data[1];
+				break;
+			case SSB_SDIO_CIS_BFLAGS:
+				GOTO_ERROR_ON((tuple->size != 3) &&
+					      (tuple->size != 5),
+					      "bfl tpl size");
+				sprom->boardflags_lo = tuple->data[1] |
+						 ((u16)tuple->data[2] << 8);
+				break;
+			case SSB_SDIO_CIS_LEDS:
+				GOTO_ERROR_ON(tuple->size != 5,
+					      "leds tpl size");
+				sprom->gpio0 = tuple->data[1];
+				sprom->gpio1 = tuple->data[2];
+				sprom->gpio2 = tuple->data[3];
+				sprom->gpio3 = tuple->data[4];
+				break;
+			default:
+				break;
+			}
+			break;
+		default:
+			break;
+		}
+		tuple = tuple->next;
+	}
+
+	return 0;
+error:
+	dev_err(ssb_sdio_dev(bus), "failed to fetch device invariants: %s\n",
+		error_description);
+	return -ENODEV;
+}
+
+void ssb_sdio_exit(struct ssb_bus *bus)
+{
+	if (bus->bustype != SSB_BUSTYPE_SDIO)
+		return;
+	/* Nothing to do here. */
+}
+
+int ssb_sdio_init(struct ssb_bus *bus)
+{
+	if (bus->bustype != SSB_BUSTYPE_SDIO)
+		return 0;
+
+	bus->sdio_sbaddr = ~0;
+
+	return 0;
+}
diff --git a/drivers/ssb/ssb_private.h b/drivers/ssb/ssb_private.h
index 57fa482abb9..25433565dfd 100644
--- a/drivers/ssb/ssb_private.h
+++ b/drivers/ssb/ssb_private.h
@@ -114,6 +114,46 @@ static inline int ssb_pcmcia_init(struct ssb_bus *bus)
 }
 #endif /* CONFIG_SSB_PCMCIAHOST */
 
+/* sdio.c */
+#ifdef CONFIG_SSB_SDIOHOST
+extern int ssb_sdio_get_invariants(struct ssb_bus *bus,
+				     struct ssb_init_invariants *iv);
+
+extern u32 ssb_sdio_scan_read32(struct ssb_bus *bus, u16 offset);
+extern int ssb_sdio_switch_core(struct ssb_bus *bus, struct ssb_device *dev);
+extern int ssb_sdio_scan_switch_coreidx(struct ssb_bus *bus, u8 coreidx);
+extern int ssb_sdio_hardware_setup(struct ssb_bus *bus);
+extern void ssb_sdio_exit(struct ssb_bus *bus);
+extern int ssb_sdio_init(struct ssb_bus *bus);
+
+extern const struct ssb_bus_ops ssb_sdio_ops;
+#else /* CONFIG_SSB_SDIOHOST */
+static inline u32 ssb_sdio_scan_read32(struct ssb_bus *bus, u16 offset)
+{
+	return 0;
+}
+static inline int ssb_sdio_switch_core(struct ssb_bus *bus,
+					 struct ssb_device *dev)
+{
+	return 0;
+}
+static inline int ssb_sdio_scan_switch_coreidx(struct ssb_bus *bus, u8 coreidx)
+{
+	return 0;
+}
+static inline int ssb_sdio_hardware_setup(struct ssb_bus *bus)
+{
+	return 0;
+}
+static inline void ssb_sdio_exit(struct ssb_bus *bus)
+{
+}
+static inline int ssb_sdio_init(struct ssb_bus *bus)
+{
+	return 0;
+}
+#endif /* CONFIG_SSB_SDIOHOST */
+
 
 /* scan.c */
 extern const char *ssb_core_name(u16 coreid);
diff --git a/include/linux/ssb/ssb.h b/include/linux/ssb/ssb.h
index 17ffc1f84d7..3d0a9ff24f0 100644
--- a/include/linux/ssb/ssb.h
+++ b/include/linux/ssb/ssb.h
@@ -238,6 +238,7 @@ enum ssb_bustype {
 	SSB_BUSTYPE_SSB,	/* This SSB bus is the system bus */
 	SSB_BUSTYPE_PCI,	/* SSB is connected to PCI bus */
 	SSB_BUSTYPE_PCMCIA,	/* SSB is connected to PCMCIA bus */
+	SSB_BUSTYPE_SDIO,	/* SSB is connected to SDIO bus */
 };
 
 /* board_vendor */
@@ -270,8 +271,12 @@ struct ssb_bus {
 
 	/* The core in the basic address register window. (PCI bus only) */
 	struct ssb_device *mapped_device;
-	/* Currently mapped PCMCIA segment. (bustype == SSB_BUSTYPE_PCMCIA only) */
-	u8 mapped_pcmcia_seg;
+	union {
+		/* Currently mapped PCMCIA segment. (bustype == SSB_BUSTYPE_PCMCIA only) */
+		u8 mapped_pcmcia_seg;
+		/* Current SSB base address window for SDIO. */
+		u32 sdio_sbaddr;
+	};
 	/* Lock for core and segment switching.
 	 * On PCMCIA-host busses this is used to protect the whole MMIO access. */
 	spinlock_t bar_lock;
@@ -282,6 +287,11 @@ struct ssb_bus {
 	struct pci_dev *host_pci;
 	/* Pointer to the PCMCIA device (only if bustype == SSB_BUSTYPE_PCMCIA). */
 	struct pcmcia_device *host_pcmcia;
+	/* Pointer to the SDIO device (only if bustype == SSB_BUSTYPE_SDIO). */
+	struct sdio_func *host_sdio;
+
+	/* See enum ssb_quirks */
+	unsigned int quirks;
 
 #ifdef CONFIG_SSB_SPROM
 	/* Mutex to protect the SPROM writing. */
@@ -336,6 +346,11 @@ struct ssb_bus {
 #endif /* DEBUG */
 };
 
+enum ssb_quirks {
+	/* SDIO connected card requires performing a read after writing a 32-bit value */
+	SSB_QUIRK_SDIO_READ_AFTER_WRITE32	= (1 << 0),
+};
+
 /* The initialization-invariants. */
 struct ssb_init_invariants {
 	/* Versioning information about the PCB. */
@@ -366,6 +381,12 @@ extern int ssb_bus_pcmciabus_register(struct ssb_bus *bus,
 				      struct pcmcia_device *pcmcia_dev,
 				      unsigned long baseaddr);
 #endif /* CONFIG_SSB_PCMCIAHOST */
+#ifdef CONFIG_SSB_SDIOHOST
+extern int ssb_bus_sdiobus_register(struct ssb_bus *bus,
+				    struct sdio_func *sdio_func,
+				    unsigned int quirks);
+#endif /* CONFIG_SSB_SDIOHOST */
+
 
 extern void ssb_bus_unregister(struct ssb_bus *bus);
 
diff --git a/net/wireless/Kconfig b/net/wireless/Kconfig
index 68c504fab12..abf7ca3f9ff 100644
--- a/net/wireless/Kconfig
+++ b/net/wireless/Kconfig
@@ -1,6 +1,15 @@
 config CFG80211
-	tristate "Improved wireless configuration API"
+	tristate "cfg80211 - wireless configuration API"
 	depends on RFKILL || !RFKILL
+	---help---
+	  cfg80211 is the Linux wireless LAN (802.11) configuration API.
+	  Enable this if you have a wireless device.
+
+	  For more information refer to documentation on the wireless wiki:
+
+	  http://wireless.kernel.org/en/developers/Documentation/cfg80211
+
+	  When built as a module it will be called cfg80211.
 
 config NL80211_TESTMODE
 	bool "nl80211 testmode command"
diff --git a/net/wireless/scan.c b/net/wireless/scan.c
index 19c5a9a8d08..4c210c2debc 100644
--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -607,6 +607,9 @@ int cfg80211_wext_siwscan(struct net_device *dev,
 	if (!netif_running(dev))
 		return -ENETDOWN;
 
+	if (wrqu->data.length == sizeof(struct iw_scan_req))
+		wreq = (struct iw_scan_req *)extra;
+
 	rdev = cfg80211_get_dev_from_ifindex(dev_net(dev), dev->ifindex);
 
 	if (IS_ERR(rdev))
@@ -619,9 +622,14 @@ int cfg80211_wext_siwscan(struct net_device *dev,
 
 	wiphy = &rdev->wiphy;
 
-	for (band = 0; band < IEEE80211_NUM_BANDS; band++)
-		if (wiphy->bands[band])
-			n_channels += wiphy->bands[band]->n_channels;
+	/* Determine number of channels, needed to allocate creq */
+	if (wreq && wreq->num_channels)
+		n_channels = wreq->num_channels;
+	else {
+		for (band = 0; band < IEEE80211_NUM_BANDS; band++)
+			if (wiphy->bands[band])
+				n_channels += wiphy->bands[band]->n_channels;
+	}
 
 	creq = kzalloc(sizeof(*creq) + sizeof(struct cfg80211_ssid) +
 		       n_channels * sizeof(void *),
@@ -638,22 +646,41 @@ int cfg80211_wext_siwscan(struct net_device *dev,
 	creq->n_channels = n_channels;
 	creq->n_ssids = 1;
 
-	/* all channels */
+	/* translate "Scan on frequencies" request */
 	i = 0;
 	for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
 		int j;
 		if (!wiphy->bands[band])
 			continue;
 		for (j = 0; j < wiphy->bands[band]->n_channels; j++) {
+
+			/* If we have a wireless request structure and the
+			 * wireless request specifies frequencies, then search
+			 * for the matching hardware channel.
+			 */
+			if (wreq && wreq->num_channels) {
+				int k;
+				int wiphy_freq = wiphy->bands[band]->channels[j].center_freq;
+				for (k = 0; k < wreq->num_channels; k++) {
+					int wext_freq = wreq->channel_list[k].m / 100000;
+					if (wext_freq == wiphy_freq)
+						goto wext_freq_found;
+				}
+				goto wext_freq_not_found;
+			}
+
+		wext_freq_found:
 			creq->channels[i] = &wiphy->bands[band]->channels[j];
 			i++;
+		wext_freq_not_found: ;
 		}
 	}
 
-	/* translate scan request */
-	if (wrqu->data.length == sizeof(struct iw_scan_req)) {
-		wreq = (struct iw_scan_req *)extra;
+	/* Set real number of channels specified in creq->channels[] */
+	creq->n_channels = i;
 
+	/* translate "Scan for SSID" request */
+	if (wreq) {
 		if (wrqu->data.flags & IW_SCAN_THIS_ESSID) {
 			if (wreq->essid_len > IEEE80211_MAX_SSID_LEN)
 				return -EINVAL;