ARM: u8500: STM: board depended code split

Hardware depended code for STM device is moved
to the separate file.

ST-Ericsson ID: 349677
ST-Ericsson Linux next: N/A
ST-Ericsson FOSS-OUT ID: Trivial

Change-Id: I5d3d0e069b0e8929b99fcfe9cb5e37a950caf716
Signed-off-by: Jurijs Soloveckis <jurijs.soloveckis@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32847
Reviewed-by: Pierre PEIFFER <pierre.peiffer@stericsson.com>
Reviewed-by: Sebastian RASMUSSEN <sebastian.rasmussen@stericsson.com>
Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>

1 files changed, 203 insertions, 0 deletions

diff --git a/arch/arm/mach-ux500/board-mop500-stm.c b/arch/arm/mach-ux500/board-mop500-stm.c
new file mode 100644
index 00000000000..8a0fc83679d
--- /dev/null
+++ b/arch/arm/mach-ux500/board-mop500-stm.c
@@ -0,0 +1,203 @@
+/*
+ * Copyright (C) 2011 ST-Ericsson
+ *
+ * Author: Pierre Peiffer <pierre.peiffer@stericsson.com> for ST-Ericsson.
+ * Author: Olivier Germain <olivier.germain@stericsson.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/gpio/nomadik.h>
+#include <plat/pincfg.h>
+#include <mach/devices.h>
+#include <linux/mfd/dbx500-prcmu.h>
+#include <mach/hsi.h>
+#include <trace/stm.h>
+#include "pins-db8500.h"
+
+static pin_cfg_t mop500_stm_mipi34_pins[] = {
+	GPIO70_STMAPE_CLK | PIN_SLPM_USE_MUX_SETTINGS_IN_SLEEP,
+	GPIO71_STMAPE_DAT3 | PIN_SLPM_USE_MUX_SETTINGS_IN_SLEEP,
+	GPIO72_STMAPE_DAT2 | PIN_SLPM_USE_MUX_SETTINGS_IN_SLEEP,
+	GPIO73_STMAPE_DAT1 | PIN_SLPM_USE_MUX_SETTINGS_IN_SLEEP,
+	GPIO74_STMAPE_DAT0 | PIN_SLPM_USE_MUX_SETTINGS_IN_SLEEP,
+	GPIO75_U2_RXD | PIN_SLPM_USE_MUX_SETTINGS_IN_SLEEP,
+	GPIO76_U2_TXD | PIN_SLPM_USE_MUX_SETTINGS_IN_SLEEP,
+};
+
+static pin_cfg_t mop500_stm_mipi60_pins[] = {
+	GPIO153_U2_RXD,
+	GPIO154_U2_TXD,
+	GPIO155_STMAPE_CLK,
+	GPIO156_STMAPE_DAT3,
+	GPIO157_STMAPE_DAT2,
+	GPIO158_STMAPE_DAT1,
+	GPIO159_STMAPE_DAT0,
+};
+
+static pin_cfg_t mop500_ske_pins[] = {
+	GPIO153_KP_I7 | PIN_INPUT_PULLDOWN | PIN_SLPM_INPUT_PULLUP,
+	GPIO154_KP_I6 | PIN_INPUT_PULLDOWN | PIN_SLPM_INPUT_PULLUP,
+	GPIO155_KP_I5 | PIN_INPUT_PULLDOWN | PIN_SLPM_INPUT_PULLUP,
+	GPIO156_KP_I4 | PIN_INPUT_PULLDOWN | PIN_SLPM_INPUT_PULLUP,
+	GPIO161_KP_I3 | PIN_INPUT_PULLDOWN | PIN_SLPM_INPUT_PULLUP,
+	GPIO162_KP_I2 | PIN_INPUT_PULLDOWN | PIN_SLPM_INPUT_PULLUP,
+	GPIO163_KP_I1 | PIN_INPUT_PULLDOWN | PIN_SLPM_INPUT_PULLUP,
+	GPIO164_KP_I0 | PIN_INPUT_PULLDOWN | PIN_SLPM_INPUT_PULLUP,
+	GPIO157_KP_O7 | PIN_INPUT_PULLUP | PIN_SLPM_OUTPUT_LOW,
+	GPIO158_KP_O6 | PIN_INPUT_PULLUP | PIN_SLPM_OUTPUT_LOW,
+	GPIO159_KP_O5 | PIN_INPUT_PULLUP | PIN_SLPM_OUTPUT_LOW,
+	GPIO160_KP_O4 | PIN_INPUT_PULLUP | PIN_SLPM_OUTPUT_LOW,
+	GPIO165_KP_O3 | PIN_INPUT_PULLUP | PIN_SLPM_OUTPUT_LOW,
+	GPIO166_KP_O2 | PIN_INPUT_PULLUP | PIN_SLPM_OUTPUT_LOW,
+	GPIO167_KP_O1 | PIN_INPUT_PULLUP | PIN_SLPM_OUTPUT_LOW,
+	GPIO168_KP_O0 | PIN_INPUT_PULLUP | PIN_SLPM_OUTPUT_LOW,
+};
+
+static int stm_ste_disable_ape_on_mipi60(void)
+{
+	int retval;
+
+	retval = nmk_config_pins_sleep(ARRAY_AND_SIZE(mop500_stm_mipi60_pins));
+	if (retval)
+		pr_err("STM: Failed to disable MIPI60\n");
+	else {
+		retval = nmk_config_pins(ARRAY_AND_SIZE(mop500_ske_pins));
+		if (retval)
+			pr_err("STM: Failed to enable SKE gpio\n");
+	}
+	return retval;
+}
+
+/*
+ * Manage STM output pins connection (MIP34/MIPI60 connectors)
+ */
+#define PRCM_GPIOCR	(_PRCMU_BASE + 0x138)
+#define PRCM_GPIOCR_DBG_STM_MOD_CMD1 0x800
+#define PRCM_GPIOCR_DBG_UARTMOD_CMD0 0x1
+
+
+static int stm_ste_connection(enum stm_connection_type con_type)
+{
+	int retval = -EINVAL;
+	u32 gpiocr = readl(PRCM_GPIOCR);
+
+	if (con_type != STM_DISCONNECT) {
+		/*  Always enable MIPI34 GPIO pins */
+		retval = nmk_config_pins(
+				ARRAY_AND_SIZE(mop500_stm_mipi34_pins));
+		if (retval) {
+			pr_err("STM: Failed to enable MIPI34\n");
+			return retval;
+		}
+	}
+
+	switch (con_type) {
+	case STM_DEFAULT_CONNECTION:
+	case STM_STE_MODEM_ON_MIPI34_NONE_ON_MIPI60:
+		/* Enable altC3 on GPIO70-74 (STMMOD) & GPIO75-76 (UARTMOD) */
+		gpiocr |= (PRCM_GPIOCR_DBG_STM_MOD_CMD1
+				| PRCM_GPIOCR_DBG_UARTMOD_CMD0);
+		writel(gpiocr, PRCM_GPIOCR);
+		retval = stm_ste_disable_ape_on_mipi60();
+		break;
+
+	case STM_STE_APE_ON_MIPI34_NONE_ON_MIPI60:
+		/* Disable altC3 on GPIO70-74 (STMMOD) & GPIO75-76 (UARTMOD) */
+		gpiocr &= ~(PRCM_GPIOCR_DBG_STM_MOD_CMD1
+				| PRCM_GPIOCR_DBG_UARTMOD_CMD0);
+		writel(gpiocr, PRCM_GPIOCR);
+		retval = stm_ste_disable_ape_on_mipi60();
+		break;
+
+	case STM_STE_MODEM_ON_MIPI34_APE_ON_MIPI60:
+		/* Enable altC3 on GPIO70-74 (STMMOD) and GPIO75-76 (UARTMOD) */
+		gpiocr |= (PRCM_GPIOCR_DBG_STM_MOD_CMD1
+				| PRCM_GPIOCR_DBG_UARTMOD_CMD0);
+		writel(gpiocr, PRCM_GPIOCR);
+
+		/* Enable APE on MIPI60 */
+		retval = nmk_config_pins_sleep(ARRAY_AND_SIZE(mop500_ske_pins));
+		if (retval)
+			pr_err("STM: Failed to disable SKE GPIO\n");
+		else {
+			retval = nmk_config_pins(
+					ARRAY_AND_SIZE(mop500_stm_mipi60_pins));
+			if (retval)
+				pr_err("STM: Failed to enable MIPI60\n");
+		}
+		break;
+
+	case STM_DISCONNECT:
+		retval = nmk_config_pins_sleep(
+				ARRAY_AND_SIZE(mop500_stm_mipi34_pins));
+		if (retval)
+			pr_err("STM: Failed to disable MIPI34\n");
+
+		retval = stm_ste_disable_ape_on_mipi60();
+		break;
+
+	default:
+		pr_err("STM: bad connection type\n");
+		break;
+	}
+	return retval;
+}
+
+/* Possible STM sources (masters) on ux500 */
+enum stm_master {
+	STM_ARM0 =	0,
+	STM_ARM1 =	1,
+	STM_SVA =	2,
+	STM_SIA =	3,
+	STM_SIA_XP70 =	4,
+	STM_PRCMU =	5,
+	STM_MCSBAG =	9
+};
+
+#define STM_ENABLE_ARM0		BIT(STM_ARM0)
+#define STM_ENABLE_ARM1		BIT(STM_ARM1)
+#define STM_ENABLE_SVA		BIT(STM_SVA)
+#define STM_ENABLE_SIA		BIT(STM_SIA)
+#define STM_ENABLE_SIA_XP70	BIT(STM_SIA_XP70)
+#define STM_ENABLE_PRCMU	BIT(STM_PRCMU)
+#define STM_ENABLE_MCSBAG	BIT(STM_MCSBAG)
+
+/*
+ * These are the channels used by NMF and some external softwares
+ * expect the NMF traces to be output on these channels
+ * For legacy reason, we need to reserve them.
+ */
+static const s16 stm_channels_reserved[] = {
+	100,	/* NMF MPCEE channel */
+	101,	/* NMF CM channel */
+	151,	/* NMF HOSTEE channel */
+};
+
+/* On Ux500 we 2 consecutive STMs therefore 512 channels available */
+static struct stm_platform_data stm_pdata = {
+	.regs_phys_base       = U8500_STM_REG_BASE,
+	.channels_phys_base   = U8500_STM_BASE,
+	.id_mask              = 0x000fffff,   /* Ignore revisions differences */
+	.channels_reserved    = stm_channels_reserved,
+	.channels_reserved_sz = ARRAY_SIZE(stm_channels_reserved),
+	/* Enable all except MCSBAG */
+	.masters_enabled      = STM_ENABLE_ARM0 | STM_ENABLE_ARM1 |
+				STM_ENABLE_SVA | STM_ENABLE_PRCMU |
+				STM_ENABLE_SIA | STM_ENABLE_SIA_XP70,
+	/* Provide function for MIPI34/MIPI60 STM connection */
+	.stm_connection       = stm_ste_connection,
+};
+
+struct platform_device u8500_stm_device = {
+	.name = "stm",
+	.id = -1,
+	.dev = {
+		.platform_data = &stm_pdata,
+	},
+};