summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/usb/core/driver.c1
-rw-r--r--drivers/usb/core/hub.c135
-rw-r--r--drivers/usb/musb/musb_core.c7
-rw-r--r--drivers/usb/musb/musb_core.h6
-rw-r--r--drivers/usb/musb/musb_gadget.c2
-rw-r--r--drivers/usb/musb/musb_gadget_ep0.c54
-rw-r--r--drivers/usb/musb/musb_regs.h4
-rw-r--r--drivers/usb/musb/ux500.c9
-rw-r--r--drivers/usb/otg/ab8500-usb.c23
-rw-r--r--include/linux/usb/gadget.h5
10 files changed, 213 insertions, 33 deletions
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index b3948206024..7ce5080df46 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -1306,6 +1306,7 @@ void usb_hnp_polling_work(struct work_struct *work)
if (ret < 0) {
/* Peripheral may not be supporting HNP polling */
dev_vdbg(&udev->dev, "HNP polling failed. status %d\n", ret);
+ ret = usb_suspend_both(udev, PMSG_USER_SUSPEND);
goto out;
}
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index f4038c53b61..f78df1d3163 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -639,7 +639,7 @@ static int hub_hub_status(struct usb_hub *hub,
"%s failed (err = %d)\n", __func__, ret);
else {
*status = le16_to_cpu(hub->status->hub.wHubStatus);
- *change = le16_to_cpu(hub->status->hub.wHubChange);
+ *change = le16_to_cpu(hub->status->hub.wHubChange);
ret = 0;
}
mutex_unlock(&hub->status_mutex);
@@ -1693,7 +1693,7 @@ void usb_disconnect(struct usb_device **pdev)
dev_info(&udev->dev, "USB disconnect, device number %d\n",
udev->devnum);
-#ifdef CONFIG_USB_OTG
+#ifdef CONFIG_USB_OTG_20
if (udev->bus->hnp_support && udev->portnum == udev->bus->otg_port) {
cancel_delayed_work_sync(&udev->bus->hnp_polling);
udev->bus->hnp_support = 0;
@@ -1775,11 +1775,13 @@ static inline void announce_device(struct usb_device *udev) { }
*
* Finish enumeration for On-The-Go devices
*/
+
+#ifdef CONFIG_USB_OTG_20
+
static int usb_enumerate_device_otg(struct usb_device *udev)
{
int err = 0;
-#ifdef CONFIG_USB_OTG
/*
* OTG-aware devices on OTG-capable root hubs may be able to use SRP,
* to wake us after we've powered off VBUS; and HNP, switching roles
@@ -1803,6 +1805,10 @@ static int usb_enumerate_device_otg(struct usb_device *udev)
(port1 == bus->otg_port)
? "" : "non-");
+ if (port1 != bus->otg_port)
+ goto out;
+ bus->hnp_support = 1;
+
err = usb_control_msg(udev,
usb_sndctrlpipe(udev, 0),
USB_REQ_SET_FEATURE, 0,
@@ -1832,8 +1838,6 @@ out:
if (err < 0)
dev_dbg(&udev->dev, "HNP fail, %d\n", err);
}
- err = -ENOTSUPP;
- goto fail;
} else if (udev->bus->hnp_support &&
udev->portnum == udev->bus->otg_port) {
/* HNP polling is introduced in OTG supplement Rev 2.0
@@ -1845,10 +1849,82 @@ out:
msecs_to_jiffies(THOST_REQ_POLL));
}
fail:
+
+ return err;
+}
+
+#else
+
+static int usb_enumerate_device_otg(struct usb_device *udev)
+{
+ int err = 0;
+
+#ifdef CONFIG_USB_OTG
+ /*
+ * OTG-aware devices on OTG-capable root hubs may be able to use SRP,
+ * to wake us after we've powered off VBUS; and HNP, switching roles
+ * "host" to "peripheral". The OTG descriptor helps figure this out.
+ */
+ if (!udev->bus->is_b_host
+ && udev->config
+ && udev->parent == udev->bus->root_hub) {
+ struct usb_otg_descriptor *desc = NULL;
+ struct usb_bus *bus = udev->bus;
+
+ /* descriptor may appear anywhere in config */
+ if (__usb_get_extra_descriptor(udev->rawdescriptors[0],
+ le16_to_cpu(udev->config[0].desc.wTotalLength),
+ USB_DT_OTG, (void **) &desc) == 0) {
+ if (desc->bmAttributes & USB_OTG_HNP) {
+ unsigned port1 = udev->portnum;
+
+ dev_info(&udev->dev,
+ "Dual-Role OTG device on %sHNP port\n",
+ (port1 == bus->otg_port)
+ ? "" : "non-");
+
+ /* enable HNP before suspend, it's simpler */
+ if (port1 == bus->otg_port)
+ bus->b_hnp_enable = 1;
+ err = usb_control_msg(udev,
+ usb_sndctrlpipe(udev, 0),
+ USB_REQ_SET_FEATURE, 0,
+ bus->b_hnp_enable
+ ? USB_DEVICE_B_HNP_ENABLE
+ : USB_DEVICE_A_ALT_HNP_SUPPORT,
+ 0, NULL, 0, USB_CTRL_SET_TIMEOUT);
+ if (err < 0) {
+ /* OTG MESSAGE: report errors here,
+ * customize to match your product.
+ */
+ dev_info(&udev->dev,
+ "can't set HNP mode: %d\n",
+ err);
+ bus->b_hnp_enable = 0;
+ }
+ }
+ }
+ }
+
+ if (!is_targeted(udev)) {
+
+ /* Maybe it can talk to us, though we can't talk to it.
+ * (Includes HNP test device.)
+ */
+ if (udev->bus->b_hnp_enable || udev->bus->is_b_host) {
+ err = usb_port_suspend(udev, PMSG_SUSPEND);
+ if (err < 0)
+ dev_dbg(&udev->dev, "HNP fail, %d\n", err);
+ }
+ err = -ENOTSUPP;
+ goto fail;
+ }
+fail:
#endif
return err;
}
+#endif
/**
* usb_enumerate_device - Read device configs/intfs/otg (usbcore-internal)
@@ -2508,7 +2584,7 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg)
if (udev->usb2_hw_lpm_enabled == 1)
usb_set_usb2_hardware_lpm(udev, 0);
-#ifdef CONFIG_USB_OTG
+#ifdef CONFIG_USB_OTG_20
if (!udev->bus->is_b_host && udev->bus->hnp_support &&
udev->portnum == udev->bus->otg_port) {
status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
@@ -2522,6 +2598,7 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg)
udev->bus->b_hnp_enable = 1;
}
#endif
+
/* see 7.1.7.6 */
if (hub_is_superspeed(hub->hdev))
status = set_port_feature(hub->hdev,
@@ -2676,7 +2753,7 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg)
int status;
u16 portchange, portstatus;
-#ifdef CONFIG_USB_OTG
+#ifdef CONFIG_USB_OTG_20
if (!udev->bus->is_b_host && udev->bus->hnp_support &&
udev->portnum == udev->bus->otg_port)
udev->bus->b_hnp_enable = 0;
@@ -2885,7 +2962,7 @@ EXPORT_SYMBOL_GPL(usb_root_hub_lost_power);
* Between connect detection and reset signaling there must be a delay
* of 100ms at least for debounce and power-settling. The corresponding
* timer shall restart whenever the downstream port detects a disconnect.
- *
+ *
* Apparently there are some bluetooth and irda-dongles and a number of
* low-speed devices for which this debounce period may last over a second.
* Not covered by the spec - but easy to deal with.
@@ -3083,7 +3160,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
udev->tt = &hub->tt;
udev->ttport = port1;
}
-
+
/* Why interleave GET_DESCRIPTOR and SET_ADDRESS this way?
* Because device hardware and firmware is sometimes buggy in
* this area, and this is how Linux has done it for ages.
@@ -3243,7 +3320,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
udev->ep0.desc.wMaxPacketSize = cpu_to_le16(i);
usb_ep0_reinit(udev);
}
-
+
retval = usb_get_device_descriptor(udev, USB_DT_DEVICE_SIZE);
if (retval < (signed)sizeof(udev->descriptor)) {
dev_err(&udev->dev, "device descriptor read/all, error %d\n",
@@ -3528,7 +3605,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
goto loop_disable;
}
}
-
+
/* check for devices running slower than they could */
if (le16_to_cpu(udev->descriptor.bcdUSB) >= 0x0200
&& udev->speed == USB_SPEED_FULL
@@ -3570,6 +3647,20 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
dev_dbg(hub_dev, "%dmA power budget left\n", status);
#ifdef CONFIG_USB_OTG_20
+ struct usb_otg_descriptor *desc = NULL;
+ int ret;
+ /* descriptor may appear anywhere in config */
+ __usb_get_extra_descriptor(udev->rawdescriptors[0],
+ le16_to_cpu(udev->config[0].desc.wTotalLength),
+ USB_DT_OTG, (void **) &desc);
+
+ ret = usb_control_msg(udev,
+ usb_sndctrlpipe(udev, 0),
+ USB_REQ_SET_FEATURE, 0,
+ USB_DEVICE_B_HNP_ENABLE,
+ 0, NULL, 0, USB_CTRL_SET_TIMEOUT);
+ if (ret < 0)
+ dev_dbg(hub_dev, "set feature error\n");
u16 idVendor = le16_to_cpu(udev->descriptor.idVendor);
if (idVendor == USB_OTG_TEST_MODE_VID) {
@@ -3651,8 +3742,8 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
break;
default:
/* is_targeted() will take care for wrong PID */
- dev_dbg(&udev->dev, "OTG TEST_MODE:Wrong
- PID %d\n" idProduct);
+ dev_dbg(&udev->dev, "OTG TEST_MODE:Wrong"
+ "PID %d\n", idProduct);
break;
}
@@ -3681,7 +3772,7 @@ loop:
!(hcd->driver->port_handed_over)(hcd, port1))
dev_err(hub_dev, "unable to enumerate USB device on port %d\n",
port1);
-
+
done:
hub_port_disable(hub, port1, 1);
if (hcd->driver->relinquish_port && !hub->hdev->parent)
@@ -3848,7 +3939,7 @@ static void hub_events(void)
* EM interference sometimes causes badly
* shielded USB devices to be shutdown by
* the hub, this hack enables them again.
- * Works at least with mouse driver.
+ * Works at least with mouse driver.
*/
if (!(portstatus & USB_PORT_STAT_ENABLE)
&& !connect_change
@@ -4188,7 +4279,7 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
if (ret < 0)
goto re_enumerate;
-
+
/* Device might have changed firmware (DFU or similar) */
if (descriptors_changed(udev, &descriptor)) {
dev_info(&udev->dev, "device firmware changed\n");
@@ -4221,6 +4312,16 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
goto re_enumerate;
}
mutex_unlock(hcd->bandwidth_mutex);
+
+#ifdef CONFIG_USB_OTG_20
+ ret = usb_control_msg(udev,
+ usb_sndctrlpipe(udev, 0),
+ USB_REQ_SET_FEATURE, 0,
+ USB_DEVICE_A_HNP_SUPPORT,
+ 0, NULL, 0, USB_CTRL_SET_TIMEOUT);
+ if (ret < 0)
+ dev_err(&udev->dev, "set feature error\n");
+#endif
usb_set_device_state(udev, USB_STATE_CONFIGURED);
/* Put interfaces back into the same altsettings as before.
@@ -4261,7 +4362,7 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
done:
return 0;
-
+
re_enumerate:
hub_port_logical_disconnect(parent_hub, port1);
return -ENODEV;
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 840afb3b8a0..1ab2fd8c3e9 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -714,6 +714,9 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
b_host:
musb->xceiv->state = OTG_STATE_B_HOST;
hcd->self.is_b_host = 1;
+#ifdef CONFIG_USB_OTG_20
+ musb->g.otg_hnp_reqd = 0;
+#endif
musb->ignore_disconnect = 0;
del_timer(&musb->otg_timer);
break;
@@ -1748,7 +1751,9 @@ musb_srp_store(struct device *dev, struct device_attribute *attr,
{
struct musb *musb = dev_to_musb(dev);
unsigned short srp;
-
+#ifdef CONFIG_USB_OTG_20
+ musb->xceiv->start_srp(musb->xceiv);
+#endif
if (sscanf(buf, "%hu", &srp) != 1
|| (srp != 1)) {
dev_err(dev, "SRP: Value must be 1\n");
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index f7a37fa1bfe..2d52530d3e4 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -153,7 +153,10 @@ enum musb_g_ep0_state {
#define OTG_TIME_A_WAIT_BCON 1100 /* min 1 second */
#define OTG_TIME_A_AIDL_BDIS 200 /* min 200 msec */
#define OTG_TIME_B_ASE0_BRST 100 /* min 3.125 ms */
-
+#ifdef CONFIG_USB_OTG_20
+#define USB_SUSP_DET_DURATION 5 /* suspend time 5ms */
+#define TTST_SRP 3000 /* max 5 sec */
+#endif
/*************************** REGISTER ACCESS ********************************/
@@ -432,7 +435,6 @@ struct musb {
unsigned set_address:1;
unsigned test_mode:1;
unsigned softconnect:1;
-
u8 address;
u8 test_mode_nr;
u16 ackpend; /* ep0 */
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 461b5f2d889..b2abef69dc3 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -1662,7 +1662,9 @@ static int musb_gadget_wakeup(struct usb_gadget *gadget)
}
spin_unlock_irqrestore(&musb->lock, flags);
+#ifndef CONFIG_USB_OTG_20
otg_start_srp(musb->xceiv->otg);
+#endif
spin_lock_irqsave(&musb->lock, flags);
/* Block idling for at least 1s */
diff --git a/drivers/usb/musb/musb_gadget_ep0.c b/drivers/usb/musb/musb_gadget_ep0.c
index e40d7647caf..631aab86240 100644
--- a/drivers/usb/musb/musb_gadget_ep0.c
+++ b/drivers/usb/musb/musb_gadget_ep0.c
@@ -45,6 +45,11 @@
/* ep0 is always musb->endpoints[0].ep_in */
#define next_ep0_request(musb) next_in_request(&(musb)->endpoints[0])
+/* OTG 2.0 Specification 6.2.3 GetStatus commands */
+#ifdef CONFIG_USB_OTG_20
+#define OTG_STATUS_SELECT 0xF
+#endif
+
/*
* locking note: we use only the controller lock, for simpler correctness.
* It's always held with IRQs blocked.
@@ -80,21 +85,33 @@ static int service_tx_status_request(
int handled = 1;
u8 result[2], epnum = 0;
const u8 recip = ctrlrequest->bRequestType & USB_RECIP_MASK;
-
+#ifdef CONFIG_USB_OTG_20
+ unsigned int otg_recip = ctrlrequest->wIndex >> 12;
+#endif
result[1] = 0;
switch (recip) {
case USB_RECIP_DEVICE:
- result[0] = musb->is_self_powered << USB_DEVICE_SELF_POWERED;
- result[0] |= musb->may_wakeup << USB_DEVICE_REMOTE_WAKEUP;
- if (musb->g.is_otg) {
- result[0] |= musb->g.b_hnp_enable
- << USB_DEVICE_B_HNP_ENABLE;
- result[0] |= musb->g.a_alt_hnp_support
- << USB_DEVICE_A_ALT_HNP_SUPPORT;
- result[0] |= musb->g.a_hnp_support
- << USB_DEVICE_A_HNP_SUPPORT;
+#ifdef CONFIG_USB_OTG_20
+ if (!(otg_recip == OTG_STATUS_SELECT)) {
+#endif
+ result[0] = musb->is_self_powered <<
+ USB_DEVICE_SELF_POWERED;
+ result[0] |= musb->may_wakeup <<
+ USB_DEVICE_REMOTE_WAKEUP;
+ if (musb->g.is_otg) {
+ result[0] |= musb->g.b_hnp_enable
+ << USB_DEVICE_B_HNP_ENABLE;
+ result[0] |= musb->g.a_alt_hnp_support
+ << USB_DEVICE_A_ALT_HNP_SUPPORT;
+ result[0] |= musb->g.a_hnp_support
+ << USB_DEVICE_A_HNP_SUPPORT;
+ }
+#ifdef CONFIG_USB_OTG_20
+ } else {
+ result[0] = 1 & musb->g.otg_hnp_reqd;
}
+#endif
break;
case USB_RECIP_INTERFACE:
@@ -356,7 +373,22 @@ __acquires(musb->lock)
musb->test_mode_nr =
MUSB_TEST_PACKET;
break;
-
+#ifdef CONFIG_USB_OTG_20
+ case 6:
+ if (!musb->g.is_otg)
+ goto stall;
+ musb->g.otg_srp_reqd = 1;
+
+ mod_timer(&musb->otg_timer,
+ jiffies
+ + msecs_to_jiffies(TTST_SRP));
+ break;
+ case 7:
+ if (!musb->g.is_otg)
+ goto stall;
+ musb->g.otg_hnp_reqd = 1;
+ break;
+#endif
case 0xc0:
/* TEST_FORCE_HS */
pr_debug("TEST_FORCE_HS\n");
diff --git a/drivers/usb/musb/musb_regs.h b/drivers/usb/musb/musb_regs.h
index 03f2655af29..1c96cf60907 100644
--- a/drivers/usb/musb/musb_regs.h
+++ b/drivers/usb/musb/musb_regs.h
@@ -246,7 +246,9 @@
*/
#define MUSB_DEVCTL 0x60 /* 8 bit */
-
+#ifdef CONFIG_USB_OTG_20
+#define MUSB_MISC 0x61 /* 8 bit */
+#endif
/* These are always controlled through the INDEX register */
#define MUSB_TXFIFOSZ 0x62 /* 8-bit (see masks) */
#define MUSB_RXFIFOSZ 0x63 /* 8-bit (see masks) */
diff --git a/drivers/usb/musb/ux500.c b/drivers/usb/musb/ux500.c
index fe322cf541c..89ef846d32c 100644
--- a/drivers/usb/musb/ux500.c
+++ b/drivers/usb/musb/ux500.c
@@ -311,11 +311,18 @@ static void ux500_musb_set_vbus(struct musb *musb, int is_on)
u8 devctl;
unsigned long timeout = jiffies + msecs_to_jiffies(1000);
int ret = 1;
+#ifdef CONFIG_USB_OTG_20
+ int val = 0;
+#endif
/* HDRC controls CPEN, but beware current surges during device
* connect. They can trigger transient overcurrent conditions
* that must be ignored.
*/
-
+#ifdef CONFIG_USB_OTG_20
+ val = musb_readb(musb->mregs, MUSB_MISC);
+ val |= 0x1C;
+ musb_writeb(musb->mregs, MUSB_MISC, val);
+#endif
devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
if (is_on) {
diff --git a/drivers/usb/otg/ab8500-usb.c b/drivers/usb/otg/ab8500-usb.c
index a698165135e..7efd64b3bc5 100644
--- a/drivers/usb/otg/ab8500-usb.c
+++ b/drivers/usb/otg/ab8500-usb.c
@@ -484,6 +484,26 @@ static unsigned ab8500_eyediagram_workaroud(struct ab8500_usb *ab, unsigned mA)
return mA;
}
+#ifdef CONFIG_USB_OTG_20
+static int ab8500_usb_start_srp(struct usb_phy *phy, unsigned mA)
+{
+ struct ab8500_usb *ab;
+
+ if (!phy)
+ return -ENODEV;
+
+ ab = phy_to_ab(phy);
+
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ USB_EVENT_PREPARE,
+ &ab->vbus_draw);
+
+ ab8500_usb_peri_phy_en(ab);
+
+ return 0;
+}
+#endif
+
static int ab8500_usb_set_power(struct usb_phy *phy, unsigned mA)
{
struct ab8500_usb *ab;
@@ -838,6 +858,9 @@ static int __devinit ab8500_usb_probe(struct platform_device *pdev)
otg->phy = &ab->phy;
otg->set_host = ab8500_usb_set_host;
otg->set_peripheral = ab8500_usb_set_peripheral;
+#ifdef CONFIG_USB_OTG_20
+ ab->otg.start_srp = ab8500_usb_start_srp;
+#endif
ab->sysfs_flag = true;
platform_set_drvdata(pdev, ab);
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index 51c97812bf4..164c9a03052 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -536,6 +536,11 @@ struct usb_gadget {
unsigned b_hnp_enable:1;
unsigned a_hnp_support:1;
unsigned a_alt_hnp_support:1;
+#ifdef CONFIG_USB_OTG_20
+ unsigned host_request:1;
+ unsigned otg_hnp_reqd:1;
+ unsigned otg_srp_reqd:1;
+#endif
const char *name;
struct device dev;
};