diff options
Diffstat (limited to 'drivers/hwmon')
| -rw-r--r-- | drivers/hwmon/Kconfig | 38 | ||||
| -rw-r--r-- | drivers/hwmon/Makefile | 3 | ||||
| -rw-r--r-- | drivers/hwmon/ab5500.c | 212 | ||||
| -rw-r--r-- | drivers/hwmon/ab8500.c | 184 | ||||
| -rw-r--r-- | drivers/hwmon/abx500.c | 698 | ||||
| -rw-r--r-- | drivers/hwmon/abx500.h | 95 | ||||
| -rw-r--r-- | drivers/hwmon/dbx500.c | 402 | ||||
| -rw-r--r-- | drivers/hwmon/hwmon.c | 21 |
8 files changed, 1653 insertions, 0 deletions
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 8deedc1b984..58b2a6c93c8 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -39,6 +39,44 @@ config HWMON_DEBUG_CHIP comment "Native drivers" +config SENSORS_AB8500 + tristate "AB8500 thermal monitoring" + depends on AB8500_GPADC + default n + help + If you say yes here you get support for the thermal sensor part + of the AB8500 chip. The driver includes thermal management for + AB8500 die and two GPADC channels. The GPADC channel are preferably + used to access sensors outside the AB8500 chip. + + This driver can also be built as a module. If so, the module + will be called abx500-temp. + +config SENSORS_AB5500 + tristate "AB5500 thermal monitoring" + depends on AB5500_GPADC + default n + help + If you say yes here you get support for the thermal sensor part + of the AB5500 chip. The driver includes thermal management for + AB5500 die, pcb and RF XTAL temperature. + + This driver can also be built as a module. If so, the module + will be called abx500-temp. + +config SENSORS_DBX500 + tristate "DBX500 thermal monitoring" + depends on MFD_DB8500_PRCMU || MFD_DB5500_PRCMU + default n + help + If you say yes here you get support for the thermal sensor part + of the DBX500 chip. The driver includes thermal management for + DBX500 die. + + This driver can also be built as a module. If so, the module + will be called dbx500_temp. + + config SENSORS_ABITUGURU tristate "Abit uGuru (rev 1 & 2)" depends on X86 && DMI && EXPERIMENTAL diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 6d3f11f7181..1e893cbdb83 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -19,6 +19,9 @@ obj-$(CONFIG_SENSORS_W83795) += w83795.o obj-$(CONFIG_SENSORS_W83781D) += w83781d.o obj-$(CONFIG_SENSORS_W83791D) += w83791d.o +obj-$(CONFIG_SENSORS_AB8500) += abx500.o ab8500.o +obj-$(CONFIG_SENSORS_AB5500) += abx500.o ab5500.o +obj-$(CONFIG_SENSORS_DBX500) += dbx500.o obj-$(CONFIG_SENSORS_ABITUGURU) += abituguru.o obj-$(CONFIG_SENSORS_ABITUGURU3)+= abituguru3.o obj-$(CONFIG_SENSORS_AD7314) += ad7314.o diff --git a/drivers/hwmon/ab5500.c b/drivers/hwmon/ab5500.c new file mode 100644 index 00000000000..cafadeba51c --- /dev/null +++ b/drivers/hwmon/ab5500.c @@ -0,0 +1,212 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * Author: Martin Persson <martin.persson@stericsson.com> for + * ST-Ericsson. + * License terms: GNU Gereral Public License (GPL) version 2 + * + * Note: + * + * If/when the AB5500 thermal warning temperature is reached (threshold + * 125C cannot be changed by SW), an interrupt is set and the driver + * notifies user space via a sysfs event. If a shut down is not + * triggered by user space and temperature reaches beyond critical + * limit(130C) pm_power off is called. + * + * If/when AB5500 thermal shutdown temperature is reached a hardware + * shutdown of the AB5500 will occur. + */ + +#include <linux/slab.h> +#include <linux/err.h> +#include <linux/hwmon.h> +#include <linux/sysfs.h> +#include <linux/hwmon-sysfs.h> +#include <linux/platform_device.h> +#include <linux/mfd/abx500/ab5500-gpadc.h> +#include <linux/mfd/abx500/ab5500-bm.h> +#include "abx500.h" +#include <asm/mach-types.h> + +/* AB5500 driver monitors GPADC - XTAL_TEMP, PCB_TEMP, + * BTEMP_BALL, BAT_CTRL and DIE_TEMP + */ +#define NUM_MONITORED_SENSORS 5 + +#define SHUTDOWN_AUTO_MIN_LIMIT -25 +#define SHUTDOWN_AUTO_MAX_LIMIT 130 + +static int ab5500_output_convert(int val, u8 sensor) +{ + int res = val; + /* GPADC returns die temperature in Celsius + * convert it to millidegree celsius + */ + if (sensor == DIE_TEMP) + res = val * 1000; + + return res; +} + +static int ab5500_read_sensor(struct abx500_temp *data, u8 sensor) +{ + int val; + /* + * Special treatment for BAT_CTRL node, since this + * temperature measurement is more complex than just + * an ADC readout + */ + if (sensor == BAT_CTRL) + val = ab5500_btemp_get_batctrl_temp(data->ab5500_btemp); + else + val = ab5500_gpadc_convert(data->ab5500_gpadc, sensor); + + if (val < 0) + return val; + else + return ab5500_output_convert(val, sensor); +} + +static ssize_t ab5500_show_name(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + return sprintf(buf, "ab5500\n"); +} + +static ssize_t ab5500_show_label(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + char *name; + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + int index = attr->index; + + /* + * Make sure these labels correspond to the attribute indexes + * used when calling SENSOR_DEVICE_ATRR. + * Temperature sensors outside ab8500 (read via GPADC) are marked + * with prefix ext_ + */ + switch (index) { + case 1: + name = "xtal_temp"; + break; + case 2: + name = "pcb_temp"; + break; + case 3: + name = "bat_temp"; + break; + case 4: + name = "bat_ctrl"; + break; + case 5: + name = "ab5500"; + break; + default: + return -EINVAL; + } + return sprintf(buf, "%s\n", name); +} + +static int temp_shutdown_trig(int mux) +{ + pm_power_off(); + return 0; +} + +static int ab5500_temp_shutdown_auto(struct abx500_temp *data) +{ + int ret; + struct adc_auto_input *auto_ip; + + auto_ip = kzalloc(sizeof(struct adc_auto_input), GFP_KERNEL); + if (!auto_ip) { + dev_err(&data->pdev->dev, "failed to allocate memory\n"); + return -ENOMEM; + } + + auto_ip->mux = DIE_TEMP; + auto_ip->freq = MS500; + /* + * As per product specification, voltage decreases as + * temperature increases. Hence the min and max values + * should be passed in reverse order. + */ + auto_ip->min = SHUTDOWN_AUTO_MAX_LIMIT; + auto_ip->max = SHUTDOWN_AUTO_MIN_LIMIT; + auto_ip->auto_adc_callback = temp_shutdown_trig; + data->gpadc_auto = auto_ip; + ret = ab5500_gpadc_convert_auto(data->ab5500_gpadc, + data->gpadc_auto); + if (ret < 0) + kfree(auto_ip); + + return ret; +} + +static int ab5500_is_visible(struct attribute *attr, int n) +{ + return attr->mode; +} + +static int ab5500_temp_irq_handler(int irq, struct abx500_temp *data) +{ + /* + * Make sure the magic numbers below corresponds to the node + * used for AB5500 thermal warning from HW. + */ + mutex_lock(&data->lock); + data->crit_alarm[4] = 1; + mutex_unlock(&data->lock); + sysfs_notify(&data->pdev->dev.kobj, NULL, "temp5_crit_alarm"); + dev_info(&data->pdev->dev, "ABX500 thermal warning," + " power off system now!\n"); + return 0; +} + +int __init ab5500_hwmon_init(struct abx500_temp *data) +{ + int err; + + data->ab5500_gpadc = ab5500_gpadc_get("ab5500-adc.0"); + if (IS_ERR(data->ab5500_gpadc)) + return PTR_ERR(data->ab5500_gpadc); + + data->ab5500_btemp = ab5500_btemp_get(); + if (IS_ERR(data->ab5500_btemp)) + return PTR_ERR(data->ab5500_btemp); + + err = ab5500_temp_shutdown_auto(data); + if (err < 0) { + dev_err(&data->pdev->dev, "Failed to register" + " auto trigger(%d)\n", err); + return err; + } + + /* + * Setup HW defined data. + * + * Reference hardware (HREF): + * + * XTAL_TEMP, PCB_TEMP, BTEMP_BALL refer to millivolts and + * BAT_CTRL and DIE_TEMP refer to millidegrees + * + * Make sure indexes correspond to the attribute indexes + * used when calling SENSOR_DEVICE_ATRR + */ + data->gpadc_addr[0] = XTAL_TEMP; + data->gpadc_addr[1] = PCB_TEMP; + data->gpadc_addr[2] = BTEMP_BALL; + data->gpadc_addr[3] = BAT_CTRL; + data->gpadc_addr[4] = DIE_TEMP; + data->monitored_sensors = NUM_MONITORED_SENSORS; + + data->ops.read_sensor = ab5500_read_sensor; + data->ops.irq_handler = ab5500_temp_irq_handler; + data->ops.show_name = ab5500_show_name; + data->ops.show_label = ab5500_show_label; + data->ops.is_visible = ab5500_is_visible; + + return 0; +} diff --git a/drivers/hwmon/ab8500.c b/drivers/hwmon/ab8500.c new file mode 100644 index 00000000000..65a0f381d01 --- /dev/null +++ b/drivers/hwmon/ab8500.c @@ -0,0 +1,184 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * Author: Martin Persson <martin.persson@stericsson.com> for + * ST-Ericsson. + * License terms: GNU Gereral Public License (GPL) version 2 + * + * Note: + * + * If/when the AB8500 thermal warning temperature is reached (threshold + * cannot be changed by SW), an interrupt is set and the driver + * notifies user space via a sysfs event. If a shut down is not + * triggered by user space within a certain time frame, + * pm_power off is called. + * + * If/when AB8500 thermal shutdown temperature is reached a hardware + * shutdown of the AB8500 will occur. + */ + +#include <linux/slab.h> +#include <linux/err.h> +#include <linux/hwmon.h> +#include <linux/sysfs.h> +#include <linux/hwmon-sysfs.h> +#include <linux/platform_device.h> +#include <linux/mfd/abx500/ab8500-gpadc.h> +#include <linux/mfd/abx500/ab8500-bm.h> +#include "abx500.h" +#include <asm/mach-types.h> + +#define DEFAULT_POWER_OFF_DELAY 10000 + +/* + * The driver monitors GPADC - ADC_AUX1, ADC_AUX2, BTEMP_BALL + * and BAT_CTRL. + */ +#define NUM_MONITORED_SENSORS 4 + +static int ab8500_read_sensor(struct abx500_temp *data, u8 sensor) +{ + int val; + /* + * Special treatment for the BAT_CTRL node, since this + * temperature measurement is more complex than just + * an ADC readout + */ + if (sensor == BAT_CTRL) + val = ab8500_btemp_get_batctrl_temp(data->ab8500_btemp); + else + val = ab8500_gpadc_convert(data->ab8500_gpadc, sensor); + + return val; +} + +static void ab8500_thermal_power_off(struct work_struct *work) +{ + struct abx500_temp *data = container_of(work, struct abx500_temp, + power_off_work.work); + + dev_warn(&data->pdev->dev, "Power off due to AB8500 thermal warning\n"); + pm_power_off(); +} + +static ssize_t ab8500_show_name(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + return sprintf(buf, "ab8500\n"); +} + +static ssize_t ab8500_show_label(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + char *name; + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + int index = attr->index; + + /* + * Make sure these labels correspond to the attribute indexes + * used when calling SENSOR_DEVICE_ATRR. + * Temperature sensors outside ab8500 (read via GPADC) are marked + * with prefix ext_ + */ + switch (index) { + case 1: + name = "ext_rtc_xtal"; + break; + case 2: + name = "ext_db8500"; + break; + case 3: + name = "bat_temp"; + break; + case 4: + name = "bat_ctrl"; + break; + case 5: + name = "ab8500"; + break; + default: + return -EINVAL; + } + return sprintf(buf, "%s\n", name); +} + +static int ab8500_is_visible(struct attribute *attr, int n) +{ + if (!strcmp(attr->name, "temp5_input") || + !strcmp(attr->name, "temp5_min") || + !strcmp(attr->name, "temp5_max") || + !strcmp(attr->name, "temp5_max_hyst") || + !strcmp(attr->name, "temp5_min_alarm") || + !strcmp(attr->name, "temp5_max_alarm") || + !strcmp(attr->name, "temp5_max_hyst_alarm")) + return 0; + + return attr->mode; +} + +static int ab8500_temp_irq_handler(int irq, struct abx500_temp *data) +{ + unsigned long delay_in_jiffies; + /* + * Make sure the magic numbers below corresponds to the node + * used for AB8500 thermal warning from HW. + */ + mutex_lock(&data->lock); + data->crit_alarm[4] = 1; + mutex_unlock(&data->lock); + + hwmon_notify(data->crit_alarm[4], NULL); + sysfs_notify(&data->pdev->dev.kobj, NULL, "temp5_crit_alarm"); + dev_info(&data->pdev->dev, "AB8500 thermal warning," + " power off in %lu s\n", data->power_off_delay); + delay_in_jiffies = msecs_to_jiffies(data->power_off_delay); + schedule_delayed_work(&data->power_off_work, delay_in_jiffies); + return 0; +} + +int __init ab8500_hwmon_init(struct abx500_temp *data) +{ + data->ab8500_gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); + if (IS_ERR(data->ab8500_gpadc)) + return PTR_ERR(data->ab8500_gpadc); + + data->ab8500_btemp = ab8500_btemp_get(); + if (IS_ERR(data->ab8500_btemp)) + return PTR_ERR(data->ab8500_btemp); + + INIT_DELAYED_WORK(&data->power_off_work, ab8500_thermal_power_off); + + /* + * Setup HW defined data. + * + * Reference hardware (HREF): + * + * GPADC - ADC_AUX1, connected to NTC R2148 next to RTC_XTAL on HREF + * GPADC - ADC_AUX2, connected to NTC R2150 near DB8500 on HREF + * Hence, temp#_min/max/max_hyst refer to millivolts and not + * millidegrees + * This is not the case for BAT_CTRL where millidegrees is used + * + * HREF HW does not support reading AB8500 temperature. BUT an + * AB8500 IRQ will be launched if die crit temp limit is reached. + * + * Make sure indexes correspond to the attribute indexes + * used when calling SENSOR_DEVICE_ATRR + */ + data->gpadc_addr[0] = ADC_AUX1; + data->gpadc_addr[1] = ADC_AUX2; + data->gpadc_addr[2] = BTEMP_BALL; + data->gpadc_addr[3] = BAT_CTRL; + data->gpadc_addr[4] = DIE_TEMP; + data->power_off_delay = DEFAULT_POWER_OFF_DELAY; + data->monitored_sensors = NUM_MONITORED_SENSORS; + + data->ops.read_sensor = ab8500_read_sensor; + data->ops.irq_handler = ab8500_temp_irq_handler; + data->ops.show_name = ab8500_show_name; + data->ops.show_label = ab8500_show_label; + data->ops.is_visible = ab8500_is_visible; + + return 0; +} diff --git a/drivers/hwmon/abx500.c b/drivers/hwmon/abx500.c new file mode 100644 index 00000000000..7aa9994c54a --- /dev/null +++ b/drivers/hwmon/abx500.c @@ -0,0 +1,698 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * Author: Martin Persson <martin.persson@stericsson.com> for + * ST-Ericsson. + * License terms: GNU Gereral Public License (GPL) version 2 + * + * Note: + * + * ABX500 does not provide auto ADC, so to monitor the required + * temperatures, a periodic work is used. It is more important + * to not wake up the CPU than to perform this job, hence the use + * of a deferred delay. + * + * A deferred delay for thermal monitor is considered safe because: + * If the chip gets too hot during a sleep state it's most likely + * due to external factors, such as the surrounding temperature. + * I.e. no SW decisions will make any difference. + * + * If/when the ABX500 thermal warning temperature is reached (threshold + * cannot be changed by SW), an interrupt is set and the driver + * notifies user space via a sysfs event. + * + * If/when ABX500 thermal shutdown temperature is reached a hardware + * shutdown of the ABX500 will occur. + */ + +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/hwmon.h> +#include <linux/sysfs.h> +#include <linux/hwmon-sysfs.h> +#include <linux/err.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/workqueue.h> +#include <linux/jiffies.h> +#include <linux/mutex.h> +#include <linux/pm.h> +#include <asm/mach-types.h> + +#include "abx500.h" + +#define DEFAULT_MONITOR_DELAY 1000 + +/* + * Thresholds are considered inactive if set to 0. + * To avoid confusion for user space applications, + * the temp monitor delay is set to 0 if all thresholds + * are 0. + */ +static bool find_active_thresholds(struct abx500_temp *data) +{ + int i; + for (i = 0; i < data->monitored_sensors; i++) + if (data->max[i] != 0 || data->max_hyst[i] != 0 + || data->min[i] != 0) + return true; + + dev_dbg(&data->pdev->dev, "No active thresholds," + "cancel deferred job (if it exists)" + "and reset temp monitor delay\n"); + cancel_delayed_work_sync(&data->work); + return false; +} + +static inline void schedule_monitor(struct abx500_temp *data) +{ + unsigned long delay_in_jiffies; + delay_in_jiffies = msecs_to_jiffies(data->gpadc_monitor_delay); + schedule_delayed_work(&data->work, delay_in_jiffies); +} + +static inline void gpadc_monitor_exit(struct abx500_temp *data) +{ + cancel_delayed_work_sync(&data->work); +} + +static void gpadc_monitor(struct work_struct *work) +{ + unsigned long delay_in_jiffies; + int val, i, ret; + /* Container for alarm node name */ + char alarm_node[30]; + + bool updated_min_alarm = false; + bool updated_max_alarm = false; + bool updated_max_hyst_alarm = false; + struct abx500_temp *data = container_of(work, struct abx500_temp, + work.work); + + for (i = 0; i < data->monitored_sensors; i++) { + /* Thresholds are considered inactive if set to 0 */ + if (data->max[i] == 0 && data->max_hyst[i] == 0 + && data->min[i] == 0) + continue; + + val = data->ops.read_sensor(data, data->gpadc_addr[i]); + if (val < 0) { + dev_err(&data->pdev->dev, "GPADC read failed\n"); + continue; + } + + mutex_lock(&data->lock); + if (data->min[i] != 0) { + if (val < data->min[i]) { + if (data->min_alarm[i] == 0) { + data->min_alarm[i] = 1; + updated_min_alarm = true; + } + } else { + if (data->min_alarm[i] == 1) { + data->min_alarm[i] = 0; + updated_min_alarm = true; + } + } + + } + if (data->max[i] != 0) { + if (val > data->max[i]) { + if (data->max_alarm[i] == 0) { + data->max_alarm[i] = 1; + updated_max_alarm = true; + } + } else { + if (data->max_alarm[i] == 1) { + data->max_alarm[i] = 0; + updated_max_alarm = true; + } + } + + } + if (data->max_hyst[i] != 0) { + if (val > data->max_hyst[i]) { + if (data->max_hyst_alarm[i] == 0) { + data->max_hyst_alarm[i] = 1; + updated_max_hyst_alarm = true; + } + } else { + if (data->max_hyst_alarm[i] == 1) { + data->max_hyst_alarm[i] = 0; + updated_max_hyst_alarm = true; + } + } + } + mutex_unlock(&data->lock); + + /* hwmon attr index starts at 1, thus "i+1" below */ + if (updated_min_alarm) { + ret = snprintf(alarm_node, 16, "temp%d_min_alarm", + (i + 1)); + if (ret < 0) { + dev_err(&data->pdev->dev, + "Unable to update alarm node (%d)", + ret); + break; + } + sysfs_notify(&data->pdev->dev.kobj, NULL, alarm_node); + } + if (updated_max_alarm) { + ret = snprintf(alarm_node, 16, "temp%d_max_alarm", + (i + 1)); + if (ret < 0) { + dev_err(&data->pdev->dev, + "Unable to update alarm node (%d)", + ret); + break; + } + hwmon_notify(data->max_alarm[i], NULL); + sysfs_notify(&data->pdev->dev.kobj, NULL, alarm_node); + } + if (updated_max_hyst_alarm) { + ret = snprintf(alarm_node, 21, "temp%d_max_hyst_alarm", + (i + 1)); + if (ret < 0) { + dev_err(&data->pdev->dev, + "Unable to update alarm node (%d)", + ret); + break; + } + sysfs_notify(&data->pdev->dev.kobj, NULL, alarm_node); + } + } + delay_in_jiffies = msecs_to_jiffies(data->gpadc_monitor_delay); + schedule_delayed_work(&data->work, delay_in_jiffies); +} + +static ssize_t set_temp_monitor_delay(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count) +{ + int res; + unsigned long delay_in_s; + struct abx500_temp *data = dev_get_drvdata(dev); + + res = strict_strtoul(buf, 10, &delay_in_s); + if (res < 0) + return res; + + mutex_lock(&data->lock); + data->gpadc_monitor_delay = delay_in_s * 1000; + + if (find_active_thresholds(data)) + schedule_monitor(data); + + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t set_temp_power_off_delay(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count) +{ + int res; + unsigned long delay_in_s; + struct abx500_temp *data = dev_get_drvdata(dev); + + res = strict_strtoul(buf, 10, &delay_in_s); + if (res < 0) + return res; + + mutex_lock(&data->lock); + data->power_off_delay = delay_in_s * 1000; + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_temp_monitor_delay(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct abx500_temp *data = dev_get_drvdata(dev); + /* return time in s, not ms */ + return sprintf(buf, "%lu\n", (data->gpadc_monitor_delay) / 1000); +} + +static ssize_t show_temp_power_off_delay(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct abx500_temp *data = dev_get_drvdata(dev); + /* return time in s, not ms */ + return sprintf(buf, "%lu\n", (data->power_off_delay) / 1000); +} + +/* HWMON sysfs interface */ +static ssize_t show_name(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + /* + * To avoid confusion between sensor label and chip name, the function + * "show_label" is not used to return the chip name. + */ + struct abx500_temp *data = dev_get_drvdata(dev); + return data->ops.show_name(dev, devattr, buf); +} + +static ssize_t show_label(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + struct abx500_temp *data = dev_get_drvdata(dev); + return data->ops.show_label(dev, devattr, buf); +} + +static ssize_t show_input(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + int val; + struct abx500_temp *data = dev_get_drvdata(dev); + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + /* hwmon attr index starts at 1, thus "attr->index-1" below */ + u8 gpadc_addr = data->gpadc_addr[attr->index - 1]; + + val = data->ops.read_sensor(data, gpadc_addr); + if (val < 0) + dev_err(&data->pdev->dev, "GPADC read failed\n"); + + return sprintf(buf, "%d\n", val); +} + +/* set functions (RW nodes) */ +static ssize_t set_min(struct device *dev, struct device_attribute *devattr, + const char *buf, size_t count) +{ + unsigned long val; + struct abx500_temp *data = dev_get_drvdata(dev); + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + int res = strict_strtoul(buf, 10, &val); + if (res < 0) + return res; + + mutex_lock(&data->lock); + /* + * Threshold is considered inactive if set to 0 + * hwmon attr index starts at 1, thus "attr->index-1" below + */ + if (val == 0) + data->min_alarm[attr->index - 1] = 0; + + data->min[attr->index - 1] = val; + + if (val == 0) + (void) find_active_thresholds(data); + else + schedule_monitor(data); + + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t set_max(struct device *dev, struct device_attribute *devattr, + const char *buf, size_t count) +{ + unsigned long val; + struct abx500_temp *data = dev_get_drvdata(dev); + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + int res = strict_strtoul(buf, 10, &val); + if (res < 0) + return res; + + mutex_lock(&data->lock); + /* + * Threshold is considered inactive if set to 0 + * hwmon attr index starts at 1, thus "attr->index-1" below + */ + if (val == 0) + data->max_alarm[attr->index - 1] = 0; + + data->max[attr->index - 1] = val; + + if (val == 0) + (void) find_active_thresholds(data); + else + schedule_monitor(data); + + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t set_max_hyst(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count) +{ + unsigned long val; + struct abx500_temp *data = dev_get_drvdata(dev); + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + int res = strict_strtoul(buf, 10, &val); + if (res < 0) + return res; + + mutex_lock(&data->lock); + /* + * Threshold is considered inactive if set to 0 + * hwmon attr index starts at 1, thus "attr->index-1" below + */ + if (val == 0) + data->max_hyst_alarm[attr->index - 1] = 0; + + data->max_hyst[attr->index - 1] = val; + + if (val == 0) + (void) find_active_thresholds(data); + else + schedule_monitor(data); + + mutex_unlock(&data->lock); + + return count; +} + +/* + * show functions (RO nodes) + */ +static ssize_t show_min(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + struct abx500_temp *data = dev_get_drvdata(dev); + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + /* hwmon attr index starts at 1, thus "attr->index-1" below */ + return sprintf(buf, "%ld\n", data->min[attr->index - 1]); +} + +static ssize_t show_max(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + struct abx500_temp *data = dev_get_drvdata(dev); + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + /* hwmon attr index starts at 1, thus "attr->index-1" below */ + return sprintf(buf, "%ld\n", data->max[attr->index - 1]); +} + +static ssize_t show_max_hyst(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + struct abx500_temp *data = dev_get_drvdata(dev); + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + /* hwmon attr index starts at 1, thus "attr->index-1" below */ + return sprintf(buf, "%ld\n", data->max_hyst[attr->index - 1]); +} + +/* Alarms */ +static ssize_t show_min_alarm(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + struct abx500_temp *data = dev_get_drvdata(dev); + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + /* hwmon attr index starts at 1, thus "attr->index-1" below */ + return sprintf(buf, "%ld\n", data->min_alarm[attr->index - 1]); +} + +static ssize_t show_max_alarm(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + struct abx500_temp *data = dev_get_drvdata(dev); + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + /* hwmon attr index starts at 1, thus "attr->index-1" below */ + return sprintf(buf, "%ld\n", data->max_alarm[attr->index - 1]); +} + +static ssize_t show_max_hyst_alarm(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + struct abx500_temp *data = dev_get_drvdata(dev); + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + /* hwmon attr index starts at 1, thus "attr->index-1" below */ + return sprintf(buf, "%ld\n", data->max_hyst_alarm[attr->index - 1]); +} + +static ssize_t show_crit_alarm(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + struct abx500_temp *data = dev_get_drvdata(dev); + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + /* hwmon attr index starts at 1, thus "attr->index-1" below */ + return sprintf(buf, "%ld\n", data->crit_alarm[attr->index - 1]); +} + +static mode_t abx500_attrs_visible(struct kobject *kobj, + struct attribute *a, int n) +{ + struct device *dev = container_of(kobj, struct device, kobj); + struct abx500_temp *data = dev_get_drvdata(dev); + return data->ops.is_visible(a, n); +} + +static SENSOR_DEVICE_ATTR(temp_monitor_delay, S_IRUGO | S_IWUSR, + show_temp_monitor_delay, set_temp_monitor_delay, 0); +static SENSOR_DEVICE_ATTR(temp_power_off_delay, S_IRUGO | S_IWUSR, + show_temp_power_off_delay, + set_temp_power_off_delay, 0); + +/* Chip name, required by hwmon*/ +static SENSOR_DEVICE_ATTR(name, S_IRUGO, show_name, NULL, 0); + +/* GPADC - SENSOR1 */ +static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO, show_label, NULL, 1); +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_input, NULL, 1); +static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_min, set_min, 1); +static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_max, set_max, 1); +static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO, + show_max_hyst, set_max_hyst, 1); +static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO, show_min_alarm, NULL, 1); +static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_max_alarm, NULL, 1); +static SENSOR_DEVICE_ATTR(temp1_max_hyst_alarm, S_IRUGO, + show_max_hyst_alarm, NULL, 1); + +/* GPADC - SENSOR2 */ +static SENSOR_DEVICE_ATTR(temp2_label, S_IRUGO, show_label, NULL, 2); +static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_input, NULL, 2); +static SENSOR_DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_min, set_min, 2); +static SENSOR_DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_max, set_max, 2); +static SENSOR_DEVICE_ATTR(temp2_max_hyst, S_IWUSR | S_IRUGO, + show_max_hyst, set_max_hyst, 2); +static SENSOR_DEVICE_ATTR(temp2_min_alarm, S_IRUGO, show_min_alarm, NULL, 2); +static SENSOR_DEVICE_ATTR(temp2_max_alarm, S_IRUGO, show_max_alarm, NULL, 2); +static SENSOR_DEVICE_ATTR(temp2_max_hyst_alarm, S_IRUGO, + show_max_hyst_alarm, NULL, 2); + +/* GPADC - SENSOR3 */ +static SENSOR_DEVICE_ATTR(temp3_label, S_IRUGO, show_label, NULL, 3); +static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_input, NULL, 3); +static SENSOR_DEVICE_ATTR(temp3_min, S_IWUSR | S_IRUGO, show_min, set_min, 3); +static SENSOR_DEVICE_ATTR(temp3_max, S_IWUSR | S_IRUGO, show_max, set_max, 3); +static SENSOR_DEVICE_ATTR(temp3_max_hyst, S_IWUSR | S_IRUGO, + show_max_hyst, set_max_hyst, 3); +static SENSOR_DEVICE_ATTR(temp3_min_alarm, S_IRUGO, show_min_alarm, NULL, 3); +static SENSOR_DEVICE_ATTR(temp3_max_alarm, S_IRUGO, show_max_alarm, NULL, 3); +static SENSOR_DEVICE_ATTR(temp3_max_hyst_alarm, S_IRUGO, + show_max_hyst_alarm, NULL, 3); + +/* GPADC - SENSOR4 */ +static SENSOR_DEVICE_ATTR(temp4_label, S_IRUGO, show_label, NULL, 4); +static SENSOR_DEVICE_ATTR(temp4_input, S_IRUGO, show_input, NULL, 4); +static SENSOR_DEVICE_ATTR(temp4_min, S_IWUSR | S_IRUGO, show_min, set_min, 4); +static SENSOR_DEVICE_ATTR(temp4_max, S_IWUSR | S_IRUGO, show_max, set_max, 4); +static SENSOR_DEVICE_ATTR(temp4_max_hyst, S_IWUSR | S_IRUGO, + show_max_hyst, set_max_hyst, 4); +static SENSOR_DEVICE_ATTR(temp4_min_alarm, S_IRUGO, show_min_alarm, NULL, 4); +static SENSOR_DEVICE_ATTR(temp4_max_alarm, S_IRUGO, show_max_alarm, NULL, 4); +static SENSOR_DEVICE_ATTR(temp4_max_hyst_alarm, S_IRUGO, + show_max_hyst_alarm, NULL, 4); + +/* GPADC - SENSOR5 */ +static SENSOR_DEVICE_ATTR(temp5_label, S_IRUGO, show_label, NULL, 5); +static SENSOR_DEVICE_ATTR(temp5_input, S_IRUGO, show_input, NULL, 5); +static SENSOR_DEVICE_ATTR(temp5_min, S_IWUSR | S_IRUGO, show_min, set_min, 5); +static SENSOR_DEVICE_ATTR(temp5_max, S_IWUSR | S_IRUGO, show_max, set_max, 5); +static SENSOR_DEVICE_ATTR(temp5_max_hyst, S_IWUSR | S_IRUGO, + show_max_hyst, set_max_hyst, 5); +static SENSOR_DEVICE_ATTR(temp5_min_alarm, S_IRUGO, show_min_alarm, NULL, 5); +static SENSOR_DEVICE_ATTR(temp5_max_alarm, S_IRUGO, show_max_alarm, NULL, 5); +static SENSOR_DEVICE_ATTR(temp5_max_hyst_alarm, S_IRUGO, + show_max_hyst_alarm, NULL, 5); +static SENSOR_DEVICE_ATTR(temp5_crit_alarm, S_IRUGO, + show_crit_alarm, NULL, 5); + +struct attribute *abx500_temp_attributes[] = { + &sensor_dev_attr_name.dev_attr.attr, + &sensor_dev_attr_temp_monitor_delay.dev_attr.attr, + &sensor_dev_attr_temp_power_off_delay.dev_attr.attr, + /* GPADC SENSOR1 */ + &sensor_dev_attr_temp1_label.dev_attr.attr, + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_temp1_min.dev_attr.attr, + &sensor_dev_attr_temp1_max.dev_attr.attr, + &sensor_dev_attr_temp1_max_hyst.dev_attr.attr, + &sensor_dev_attr_temp1_min_alarm.dev_attr.attr, + &sensor_dev_attr_temp1_max_alarm.dev_attr.attr, + &sensor_dev_attr_temp1_max_hyst_alarm.dev_attr.attr, + /* GPADC SENSOR2 */ + &sensor_dev_attr_temp2_label.dev_attr.attr, + &sensor_dev_attr_temp2_input.dev_attr.attr, + &sensor_dev_attr_temp2_min.dev_attr.attr, + &sensor_dev_attr_temp2_max.dev_attr.attr, + &sensor_dev_attr_temp2_max_hyst.dev_attr.attr, + &sensor_dev_attr_temp2_min_alarm.dev_attr.attr, + &sensor_dev_attr_temp2_max_alarm.dev_attr.attr, + &sensor_dev_attr_temp2_max_hyst_alarm.dev_attr.attr, + /* GPADC SENSOR3 */ + &sensor_dev_attr_temp3_label.dev_attr.attr, + &sensor_dev_attr_temp3_input.dev_attr.attr, + &sensor_dev_attr_temp3_min.dev_attr.attr, + &sensor_dev_attr_temp3_max.dev_attr.attr, + &sensor_dev_attr_temp3_max_hyst.dev_attr.attr, + &sensor_dev_attr_temp3_min_alarm.dev_attr.attr, + &sensor_dev_attr_temp3_max_alarm.dev_attr.attr, + &sensor_dev_attr_temp3_max_hyst_alarm.dev_attr.attr, + /* GPADC SENSOR4 */ + &sensor_dev_attr_temp4_label.dev_attr.attr, + &sensor_dev_attr_temp4_input.dev_attr.attr, + &sensor_dev_attr_temp4_min.dev_attr.attr, + &sensor_dev_attr_temp4_max.dev_attr.attr, + &sensor_dev_attr_temp4_max_hyst.dev_attr.attr, + &sensor_dev_attr_temp4_min_alarm.dev_attr.attr, + &sensor_dev_attr_temp4_max_alarm.dev_attr.attr, + &sensor_dev_attr_temp4_max_hyst_alarm.dev_attr.attr, + /* GPADC SENSOR5*/ + &sensor_dev_attr_temp5_label.dev_attr.attr, + &sensor_dev_attr_temp5_input.dev_attr.attr, + &sensor_dev_attr_temp5_min.dev_attr.attr, + &sensor_dev_attr_temp5_max.dev_attr.attr, + &sensor_dev_attr_temp5_max_hyst.dev_attr.attr, + &sensor_dev_attr_temp5_min_alarm.dev_attr.attr, + &sensor_dev_attr_temp5_max_alarm.dev_attr.attr, + &sensor_dev_attr_temp5_max_hyst_alarm.dev_attr.attr, + &sensor_dev_attr_temp5_crit_alarm.dev_attr.attr, + NULL +}; + +static const struct attribute_group abx500_temp_group = { + .attrs = abx500_temp_attributes, + .is_visible = abx500_attrs_visible, +}; + +static irqreturn_t abx500_temp_irq_handler(int irq, void *irq_data) +{ + struct platform_device *pdev = irq_data; + struct abx500_temp *data = platform_get_drvdata(pdev); + data->ops.irq_handler(irq, data); + return IRQ_HANDLED; +} + +static int setup_irqs(struct platform_device *pdev) +{ + int ret; + int irq = platform_get_irq_byname(pdev, "ABX500_TEMP_WARM"); + + if (irq < 0) + dev_err(&pdev->dev, "Get irq by name failed\n"); + + ret = request_threaded_irq(irq, NULL, abx500_temp_irq_handler, + IRQF_NO_SUSPEND, "abx500-temp", pdev); + if (ret < 0) + dev_err(&pdev->dev, "Request threaded irq failed (%d)\n", ret); + + return ret; +} + +static int __devinit abx500_temp_probe(struct platform_device *pdev) +{ + struct abx500_temp *data; + int err; + + data = kzalloc(sizeof(struct abx500_temp), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->pdev = pdev; + mutex_init(&data->lock); + + /* Chip specific initialization */ + if (!machine_is_u5500()) + err = ab8500_hwmon_init(data); + else + err = ab5500_hwmon_init(data); + if (err < 0) { + dev_err(&pdev->dev, "abx500 init failed"); + goto exit; + } + + data->hwmon_dev = hwmon_device_register(&pdev->dev); + if (IS_ERR(data->hwmon_dev)) { + err = PTR_ERR(data->hwmon_dev); + dev_err(&pdev->dev, "Class registration failed (%d)\n", err); + goto exit; + } + + INIT_DELAYED_WORK_DEFERRABLE(&data->work, gpadc_monitor); + data->gpadc_monitor_delay = DEFAULT_MONITOR_DELAY; + + platform_set_drvdata(pdev, data); + + err = sysfs_create_group(&pdev->dev.kobj, &abx500_temp_group); + if (err < 0) { + dev_err(&pdev->dev, "Create sysfs group failed (%d)\n", err); + goto exit_platform_data; + } + + err = setup_irqs(pdev); + if (err < 0) { + dev_err(&pdev->dev, "irq setup failed (%d)\n", err); + goto exit_sysfs_group; + } + return 0; + +exit_sysfs_group: + sysfs_remove_group(&pdev->dev.kobj, &abx500_temp_group); +exit_platform_data: + hwmon_device_unregister(data->hwmon_dev); + platform_set_drvdata(pdev, NULL); +exit: + kfree(data->gpadc_auto); + kfree(data); + return err; +} + +static int __devexit abx500_temp_remove(struct platform_device *pdev) +{ + struct abx500_temp *data = platform_get_drvdata(pdev); + + gpadc_monitor_exit(data); + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&pdev->dev.kobj, &abx500_temp_group); + platform_set_drvdata(pdev, NULL); + kfree(data->gpadc_auto); + kfree(data); + return 0; +} + +/* No action required in suspend/resume, thus the lack of functions */ +static struct platform_driver abx500_temp_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "abx500-temp", + }, + .probe = abx500_temp_probe, + .remove = __devexit_p(abx500_temp_remove), +}; + +static int __init abx500_temp_init(void) +{ + return platform_driver_register(&abx500_temp_driver); +} + +static void __exit abx500_temp_exit(void) +{ + platform_driver_unregister(&abx500_temp_driver); +} + +MODULE_AUTHOR("Martin Persson <martin.persson@stericsson.com>"); +MODULE_DESCRIPTION("ABX500 temperature driver"); +MODULE_LICENSE("GPL"); + +module_init(abx500_temp_init) +module_exit(abx500_temp_exit) diff --git a/drivers/hwmon/abx500.h b/drivers/hwmon/abx500.h new file mode 100644 index 00000000000..9fe28dac28f --- /dev/null +++ b/drivers/hwmon/abx500.h @@ -0,0 +1,95 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * License terms: GNU General Public License v2 + * Author: Martin Persson <martin.persson@stericsson.com> + */ + +#ifndef _ABX500_H +#define _ABX500_H + +#define NUM_SENSORS 5 + +struct ab8500_gpadc; +struct ab5500_gpadc; +struct ab8500_btemp; +struct ab5500_btemp; +struct adc_auto_input; +struct abx500_temp; + +/** + * struct abx500_temp_ops - abx500 chip specific ops + * @read_sensor: reads gpadc output + * @irq_handler: irq handler + * @show_name: hwmon device name + * @show_label: hwmon attribute label + * @is_visible: is attribute visible + */ +struct abx500_temp_ops { + int (*read_sensor)(struct abx500_temp *, u8); + int (*irq_handler)(int, struct abx500_temp *); + ssize_t (*show_name)(struct device *, + struct device_attribute *, char *); + ssize_t (*show_label) (struct device *, + struct device_attribute *, char *); + int (*is_visible)(struct attribute *, int); +}; + +/** + * struct abx500_temp - representation of temp mon device + * @pdev: platform device + * @hwmon_dev: hwmon device + * @ab8500_gpadc: gpadc interface for ab8500 + * @ab5500_gpadc: gpadc interface for ab5500 + * @btemp: battery temperature interface for ab8500 + * @adc_auto_input: gpadc auto trigger + * @gpadc_addr: gpadc channel address + * @temp: sensor temperature input value + * @min: sensor temperature min value + * @max: sensor temperature max value + * @max_hyst: sensor temperature hysteresis value for max limit + * @crit: sensor temperature critical value + * @min_alarm: sensor temperature min alarm + * @max_alarm: sensor temperature max alarm + * @max_hyst_alarm: sensor temperature hysteresis alarm + * @crit_alarm: sensor temperature critical value alarm + * @work: delayed work scheduled to monitor temperature periodically + * @power_off_work: delayed work scheduled to power off the system + when critical temperature is reached + * @lock: mutex + * @gpadc_monitor_delay: delay between temperature readings in ms + * @power_off_delay: delay before power off in ms + * @monitored_sensors: number of monitored sensors + */ +struct abx500_temp { + struct platform_device *pdev; + struct device *hwmon_dev; + struct ab8500_gpadc *ab8500_gpadc; + struct ab5500_gpadc *ab5500_gpadc; + struct ab8500_btemp *ab8500_btemp; + struct ab5500_btemp *ab5500_btemp; + struct adc_auto_input *gpadc_auto; + struct abx500_temp_ops ops; + u8 gpadc_addr[NUM_SENSORS]; + unsigned long temp[NUM_SENSORS]; + unsigned long min[NUM_SENSORS]; + unsigned long max[NUM_SENSORS]; + unsigned long max_hyst[NUM_SENSORS]; + unsigned long crit[NUM_SENSORS]; + unsigned long min_alarm[NUM_SENSORS]; + unsigned long max_alarm[NUM_SENSORS]; + unsigned long max_hyst_alarm[NUM_SENSORS]; + unsigned long crit_alarm[NUM_SENSORS]; + struct delayed_work work; + struct delayed_work power_off_work; + struct mutex lock; + /* Delay (ms) between temperature readings */ + unsigned long gpadc_monitor_delay; + /* Delay (ms) before power off */ + unsigned long power_off_delay; + int monitored_sensors; +}; + +int ab8500_hwmon_init(struct abx500_temp *data) __init; +int ab5500_hwmon_init(struct abx500_temp *data) __init; + +#endif /* _ABX500_H */ diff --git a/drivers/hwmon/dbx500.c b/drivers/hwmon/dbx500.c new file mode 100644 index 00000000000..c034b48f8dd --- /dev/null +++ b/drivers/hwmon/dbx500.c @@ -0,0 +1,402 @@ +/* + * Copyright (C) ST-Ericsson SA 2010. All rights reserved. + * This code is ST-Ericsson proprietary and confidential. + * Any use of the code for whatever purpose is subject to + * specific written permission of ST-Ericsson SA. + * + * Author: WenHai Fang <wenhai.h.fang@stericsson.com> for + * ST-Ericsson. + * License terms: GNU Gereral Public License (GPL) version 2 + * + */ + +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/platform_device.h> +#include <linux/mfd/dbx500-prcmu.h> +#include <linux/hwmon.h> +#include <linux/sysfs.h> +#include <linux/hwmon-sysfs.h> +#include <linux/err.h> +#include <linux/interrupt.h> +#include <linux/workqueue.h> +#include <linux/jiffies.h> +#include <linux/mutex.h> +#include <linux/pm.h> +#include <linux/io.h> +#include <mach/hardware.h> + +/* + * Default measure period to 0xFF x cycle32k + */ +#define DEFAULT_MEASURE_TIME 0xFF + +/* + * Default critical sensor temperature + */ +#define DEFAULT_CRITICAL_TEMP 85 + +/* This driver monitors DB thermal*/ +#define NUM_SENSORS 1 + +struct dbx500_temp { + struct platform_device *pdev; + struct device *hwmon_dev; + unsigned char min[NUM_SENSORS]; + unsigned char max[NUM_SENSORS]; + unsigned char crit[NUM_SENSORS]; + unsigned char min_alarm[NUM_SENSORS]; + unsigned char max_alarm[NUM_SENSORS]; + unsigned short measure_time; + bool monitoring_active; + struct mutex lock; +}; + +static inline void start_temp_monitoring(struct dbx500_temp *data, + const int index) +{ + unsigned int i; + + /* determine if there are any sensors worth monitoring */ + for (i = 0; i < NUM_SENSORS; i++) + if (data->min[i] || data->max[i]) + goto start_monitoring; + + return; + +start_monitoring: + /* kick off the monitor job */ + data->min_alarm[index] = 0; + data->max_alarm[index] = 0; + + (void) prcmu_start_temp_sense(data->measure_time); + data->monitoring_active = true; +} + +static inline void stop_temp_monitoring(struct dbx500_temp *data) +{ + if (data->monitoring_active) { + (void) prcmu_stop_temp_sense(); + data->monitoring_active = false; + } +} + +/* HWMON sysfs interface */ +static ssize_t show_name(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + return sprintf(buf, "dbx500\n"); +} + +static ssize_t show_label(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + return show_name(dev, devattr, buf); +} + +/* set functions (RW nodes) */ +static ssize_t set_min(struct device *dev, struct device_attribute *devattr, + const char *buf, size_t count) +{ + unsigned long val; + struct dbx500_temp *data = dev_get_drvdata(dev); + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + int res = strict_strtoul(buf, 10, &val); + if (res < 0) + return res; + + mutex_lock(&data->lock); + val &= 0xFF; + if (val > data->max[attr->index - 1]) + val = data->max[attr->index - 1]; + + data->min[attr->index - 1] = val; + + stop_temp_monitoring(data); + + (void) prcmu_config_hotmon(data->min[attr->index - 1], + data->max[attr->index - 1]); + + start_temp_monitoring(data, (attr->index - 1)); + + mutex_unlock(&data->lock); + return count; +} + +static ssize_t set_max(struct device *dev, struct device_attribute *devattr, + const char *buf, size_t count) +{ + unsigned long val; + struct dbx500_temp *data = dev_get_drvdata(dev); + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + int res = strict_strtoul(buf, 10, &val); + if (res < 0) + return res; + + mutex_lock(&data->lock); + val &= 0xFF; + if (val < data->min[attr->index - 1]) + val = data->min[attr->index - 1]; + + data->max[attr->index - 1] = val; + + stop_temp_monitoring(data); + + (void) prcmu_config_hotmon(data->min[attr->index - 1], + data->max[attr->index - 1]); + + start_temp_monitoring(data, (attr->index - 1)); + + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t set_crit(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count) +{ + unsigned long val; + struct dbx500_temp *data = dev_get_drvdata(dev); + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + int res = strict_strtoul(buf, 10, &val); + if (res < 0) + return res; + + mutex_lock(&data->lock); + val &= 0xFF; + data->crit[attr->index - 1] = val; + (void) prcmu_config_hotdog(data->crit[attr->index - 1]); + mutex_unlock(&data->lock); + + return count; +} + +/* + * show functions (RO nodes) + * Notice that min/max/crit refer to degrees + */ +static ssize_t show_min(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + struct dbx500_temp *data = dev_get_drvdata(dev); + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + /* hwmon attr index starts at 1, thus "attr->index-1" below */ + return sprintf(buf, "%d\n", data->min[attr->index - 1]); +} + +static ssize_t show_max(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + struct dbx500_temp *data = dev_get_drvdata(dev); + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + /* hwmon attr index starts at 1, thus "attr->index-1" below */ + return sprintf(buf, "%d\n", data->max[attr->index - 1]); +} + +static ssize_t show_crit(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + struct dbx500_temp *data = dev_get_drvdata(dev); + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + /* hwmon attr index starts at 1, thus "attr->index-1" below */ + return sprintf(buf, "%d\n", data->crit[attr->index - 1]); +} + +/* Alarms */ +static ssize_t show_min_alarm(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + struct dbx500_temp *data = dev_get_drvdata(dev); + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + /* hwmon attr index starts at 1, thus "attr->index-1" below */ + return sprintf(buf, "%d\n", data->min_alarm[attr->index - 1]); +} + +static ssize_t show_max_alarm(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + struct dbx500_temp *data = dev_get_drvdata(dev); + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + /* hwmon attr index starts at 1, thus "attr->index-1" below */ + return sprintf(buf, "%d\n", data->max_alarm[attr->index - 1]); +} + +/* Chip name, required by hwmon*/ +static SENSOR_DEVICE_ATTR(name, S_IRUGO, show_name, NULL, 0); +static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_min, set_min, 1); +static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_max, set_max, 1); +static SENSOR_DEVICE_ATTR(temp1_crit, S_IWUSR | S_IRUGO, + show_crit, set_crit, 1); +static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO, show_label, NULL, 1); +static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO, show_min_alarm, NULL, 1); +static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_max_alarm, NULL, 1); + +static struct attribute *dbx500_temp_attributes[] = { + &sensor_dev_attr_name.dev_attr.attr, + &sensor_dev_attr_temp1_min.dev_attr.attr, + &sensor_dev_attr_temp1_max.dev_attr.attr, + &sensor_dev_attr_temp1_crit.dev_attr.attr, + &sensor_dev_attr_temp1_label.dev_attr.attr, + &sensor_dev_attr_temp1_min_alarm.dev_attr.attr, + &sensor_dev_attr_temp1_max_alarm.dev_attr.attr, + NULL +}; + +static const struct attribute_group dbx500_temp_group = { + .attrs = dbx500_temp_attributes, +}; + +static irqreturn_t prcmu_hotmon_low_irq_handler(int irq, void *irq_data) +{ + struct platform_device *pdev = irq_data; + struct dbx500_temp *data = platform_get_drvdata(pdev); + + mutex_lock(&data->lock); + data->min_alarm[0] = 1; + mutex_unlock(&data->lock); + + sysfs_notify(&pdev->dev.kobj, NULL, "temp1_min_alarm"); + dev_dbg(&pdev->dev, "DBX500 thermal low warning\n"); + return IRQ_HANDLED; +} + +static irqreturn_t prcmu_hotmon_high_irq_handler(int irq, void *irq_data) +{ + struct platform_device *pdev = irq_data; + struct dbx500_temp *data = platform_get_drvdata(pdev); + + mutex_lock(&data->lock); + data->max_alarm[0] = 1; + mutex_unlock(&data->lock); + + hwmon_notify(data->max_alarm[0], NULL); + sysfs_notify(&pdev->dev.kobj, NULL, "temp1_max_alarm"); + + return IRQ_HANDLED; +} + +static int __devinit dbx500_temp_probe(struct platform_device *pdev) +{ + struct dbx500_temp *data; + int err = 0, i; + int irq; + + dev_dbg(&pdev->dev, "dbx500_temp: Function dbx500_temp_probe.\n"); + + data = kzalloc(sizeof(struct dbx500_temp), GFP_KERNEL); + if (!data) + return -ENOMEM; + + irq = platform_get_irq_byname(pdev, "IRQ_HOTMON_LOW"); + if (irq < 0) { + dev_err(&pdev->dev, "Get IRQ_HOTMON_LOW failed\n"); + goto exit; + } + + err = request_threaded_irq(irq, NULL, + prcmu_hotmon_low_irq_handler, + IRQF_NO_SUSPEND, + "dbx500_temp_low", pdev); + if (err < 0) { + dev_err(&pdev->dev, "dbx500: Failed allocate HOTMON_LOW.\n"); + goto exit; + } else { + dev_dbg(&pdev->dev, "dbx500: Succeed allocate HOTMON_LOW.\n"); + } + + irq = platform_get_irq_byname(pdev, "IRQ_HOTMON_HIGH"); + if (irq < 0) { + dev_err(&pdev->dev, "Get IRQ_HOTMON_HIGH failed\n"); + goto exit; + } + + err = request_threaded_irq(irq, NULL, + prcmu_hotmon_high_irq_handler, + IRQF_NO_SUSPEND, + "dbx500_temp_high", pdev); + if (err < 0) { + dev_err(&pdev->dev, "dbx500: Failed allocate HOTMON_HIGH.\n"); + goto exit; + } else { + dev_dbg(&pdev->dev, "dbx500: Succeed allocate HOTMON_HIGH.\n"); + } + + data->hwmon_dev = hwmon_device_register(&pdev->dev); + if (IS_ERR(data->hwmon_dev)) { + err = PTR_ERR(data->hwmon_dev); + dev_err(&pdev->dev, "Class registration failed (%d)\n", err); + goto exit; + } + + for (i = 0; i < NUM_SENSORS; i++) { + data->min[i] = 0; + data->max[i] = 0; + data->crit[i] = DEFAULT_CRITICAL_TEMP; + data->min_alarm[i] = 0; + data->max_alarm[i] = 0; + } + + mutex_init(&data->lock); + + data->pdev = pdev; + data->measure_time = DEFAULT_MEASURE_TIME; + data->monitoring_active = false; + + /* set PRCMU to disable platform when we get to the critical temp */ + (void) prcmu_config_hotdog(DEFAULT_CRITICAL_TEMP); + + platform_set_drvdata(pdev, data); + + err = sysfs_create_group(&pdev->dev.kobj, &dbx500_temp_group); + if (err < 0) { + dev_err(&pdev->dev, "Create sysfs group failed (%d)\n", err); + goto exit_platform_data; + } + + return 0; + +exit_platform_data: + platform_set_drvdata(pdev, NULL); +exit: + kfree(data); + return err; +} + +static int __devexit dbx500_temp_remove(struct platform_device *pdev) +{ + struct dbx500_temp *data = platform_get_drvdata(pdev); + + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&pdev->dev.kobj, &dbx500_temp_group); + platform_set_drvdata(pdev, NULL); + kfree(data); + return 0; +} + +/* No action required in suspend/resume, thus the lack of functions */ +static struct platform_driver dbx500_temp_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "dbx500_temp", + }, + .probe = dbx500_temp_probe, + .remove = __devexit_p(dbx500_temp_remove), +}; + +static int __init dbx500_temp_init(void) +{ + return platform_driver_register(&dbx500_temp_driver); +} + +static void __exit dbx500_temp_exit(void) +{ + platform_driver_unregister(&dbx500_temp_driver); +} + +MODULE_AUTHOR("WenHai Fang <wenhai.h.fang@stericsson.com>"); +MODULE_DESCRIPTION("DBX500 temperature driver"); +MODULE_LICENSE("GPL"); + +module_init(dbx500_temp_init) +module_exit(dbx500_temp_exit) diff --git a/drivers/hwmon/hwmon.c b/drivers/hwmon/hwmon.c index c3c471ca202..8957bbac7a7 100644 --- a/drivers/hwmon/hwmon.c +++ b/drivers/hwmon/hwmon.c @@ -21,6 +21,7 @@ #include <linux/gfp.h> #include <linux/spinlock.h> #include <linux/pci.h> +#include <linux/notifier.h> #define HWMON_ID_PREFIX "hwmon" #define HWMON_ID_FORMAT HWMON_ID_PREFIX "%d" @@ -29,6 +30,8 @@ static struct class *hwmon_class; static DEFINE_IDA(hwmon_ida); +static BLOCKING_NOTIFIER_HEAD(hwmon_notifier_list); + /** * hwmon_device_register - register w/ hwmon * @dev: the device to register @@ -75,6 +78,24 @@ void hwmon_device_unregister(struct device *dev) } EXPORT_SYMBOL_GPL(hwmon_device_unregister); +int hwmon_notifier_register(struct notifier_block *nb) +{ + return blocking_notifier_chain_register(&hwmon_notifier_list, nb); +} +EXPORT_SYMBOL(hwmon_notifier_register); + +int hwmon_notifier_unregister(struct notifier_block *nb) +{ + return blocking_notifier_chain_unregister(&hwmon_notifier_list, nb); +} +EXPORT_SYMBOL(hwmon_notifier_unregister); + +void hwmon_notify(unsigned long val, void *v) +{ + blocking_notifier_call_chain(&hwmon_notifier_list, val, v); +} +EXPORT_SYMBOL(hwmon_notify); + static void __init hwmon_pci_quirks(void) { #if defined CONFIG_X86 && defined CONFIG_PCI |