1 files changed, 464 insertions, 0 deletions

diff --git a/drivers/input/misc/ab8500-accdet.c b/drivers/input/misc/ab8500-accdet.c
new file mode 100644
index 00000000000..1b96b6b3fef
--- /dev/null
+++ b/drivers/input/misc/ab8500-accdet.c
@@ -0,0 +1,464 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Jarmo K. Kuronen <jarmo.kuronen@symbio.com>
+ *         for ST-Ericsson.
+ *
+ * License terms: GPL V2
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/abx500.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/abx500/ab8500-gpadc.h>
+#include <linux/mfd/abx500/ab8500-gpio.h>
+#include <linux/gpio.h>
+#include <linux/err.h>
+#include <linux/input/abx500-accdet.h>
+#ifdef CONFIG_SND_SOC_UX500_AB8500
+#include <sound/ux500_ab8500_ext.h>
+#endif
+
+#define MAX_DET_COUNT			10
+#define MAX_VOLT_DIFF			30
+#define MIN_MIC_POWER			-100
+
+/* Unique value used to identify Headset button input device */
+#define BTN_INPUT_UNIQUE_VALUE	"AB8500HsBtn"
+#define BTN_INPUT_DEV_NAME	"AB8500 Hs Button"
+
+#define DEBOUNCE_PLUG_EVENT_MS		100
+#define DEBOUNCE_PLUG_RETEST_MS		25
+#define DEBOUNCE_UNPLUG_EVENT_MS	0
+
+/*
+ * Register definition for accessory detection.
+ */
+#define AB8500_REGU_CTRL1_SPARE_REG	0x84
+#define AB8500_ACC_DET_DB1_REG		0x80
+#define AB8500_ACC_DET_DB2_REG		0x81
+#define AB8500_ACC_DET_CTRL_REG		0x82
+#define AB8500_IT_SOURCE5_REG		0x04
+
+/* REGISTER: AB8500_ACC_DET_CTRL_REG */
+#define BITS_ACCDETCTRL2_ENA		(0x20 | 0x10 | 0x08)
+#define BITS_ACCDETCTRL1_ENA		(0x02 | 0x01)
+
+/* REGISTER: AB8500_REGU_CTRL1_SPARE_REG */
+#define BIT_REGUCTRL1SPARE_VAMIC1_GROUND	0x01
+
+/* REGISTER: AB8500_IT_SOURCE5_REG */
+#define BIT_ITSOURCE5_ACCDET1		0x04
+
+/* After being loaded, how fast the first check is to be made */
+#define INIT_DELAY_MS			3000
+
+/* Voltage limits (mV) for various types of AV Accessories */
+#define ACCESSORY_DET_VOL_DONTCARE	-1
+#define ACCESSORY_HEADPHONE_DET_VOL_MIN	0
+#define ACCESSORY_HEADPHONE_DET_VOL_MAX	40
+#define ACCESSORY_CARKIT_DET_VOL_MIN	1100
+#define ACCESSORY_CARKIT_DET_VOL_MAX	1300
+#define ACCESSORY_HEADSET_DET_VOL_MIN	0
+#define ACCESSORY_HEADSET_DET_VOL_MAX	200
+#define ACCESSORY_OPENCABLE_DET_VOL_MIN	1730
+#define ACCESSORY_OPENCABLE_DET_VOL_MAX	2150
+
+/* Static data initialization */
+
+static struct accessory_regu_descriptor ab8500_regu_desc[3] = {
+	{
+		.id = REGULATOR_VAUDIO,
+		.name = "v-audio",
+	},
+	{
+		.id = REGULATOR_VAMIC1,
+		.name = "v-amic1",
+	},
+	{
+		.id = REGULATOR_AVSWITCH,
+		.name = "vcc-N2158",
+	},
+};
+
+static struct accessory_irq_descriptor ab8500_irq_desc_norm[] = {
+	{
+		.irq = PLUG_IRQ,
+		.name = "ACC_DETECT_1DB_F",
+		.isr = plug_irq_handler,
+	},
+	{
+		.irq = UNPLUG_IRQ,
+		.name = "ACC_DETECT_1DB_R",
+		.isr = unplug_irq_handler,
+	},
+	{
+		.irq = BUTTON_PRESS_IRQ,
+		.name = "ACC_DETECT_22DB_F",
+		.isr = button_press_irq_handler,
+	},
+	{
+		.irq = BUTTON_RELEASE_IRQ,
+		.name = "ACC_DETECT_22DB_R",
+		.isr = button_release_irq_handler,
+	},
+};
+
+static struct accessory_irq_descriptor ab8500_irq_desc_inverted[] = {
+	{
+		.irq = PLUG_IRQ,
+		.name = "ACC_DETECT_1DB_R",
+		.isr = plug_irq_handler,
+	},
+	{
+		.irq = UNPLUG_IRQ,
+		.name = "ACC_DETECT_1DB_F",
+		.isr = unplug_irq_handler,
+	},
+	{
+		.irq = BUTTON_PRESS_IRQ,
+		.name = "ACC_DETECT_22DB_R",
+		.isr = button_press_irq_handler,
+	},
+	{
+		.irq = BUTTON_RELEASE_IRQ,
+		.name = "ACC_DETECT_22DB_F",
+		.isr = button_release_irq_handler,
+	},
+};
+
+/*
+ * configures accdet2 input on/off
+ */
+static void ab8500_config_accdetect2_hw(struct abx500_ad *dd, int enable)
+{
+	int ret = 0;
+
+	if (!dd->accdet2_th_set) {
+		/* Configure accdetect21+22 thresholds */
+		ret = abx500_set_register_interruptible(&dd->pdev->dev,
+				AB8500_ECI_AV_ACC,
+				AB8500_ACC_DET_DB2_REG,
+				dd->pdata->accdet2122_th);
+		if (ret < 0) {
+			dev_err(&dd->pdev->dev,
+				"%s: Failed to write reg (%d).\n", __func__,
+					ret);
+			goto out;
+		} else {
+			dd->accdet2_th_set = 1;
+		}
+	}
+
+	/* Enable/Disable accdetect21 comparators + pullup */
+	ret = abx500_mask_and_set_register_interruptible(
+			&dd->pdev->dev,
+			AB8500_ECI_AV_ACC,
+			AB8500_ACC_DET_CTRL_REG,
+			BITS_ACCDETCTRL2_ENA,
+			enable ? BITS_ACCDETCTRL2_ENA : 0);
+
+	if (ret < 0)
+		dev_err(&dd->pdev->dev, "%s: Failed to update reg (%d).\n",
+				__func__, ret);
+
+out:
+	return;
+}
+
+/*
+ * configures accdet1 input on/off
+ */
+static void ab8500_config_accdetect1_hw(struct abx500_ad *dd, int enable)
+{
+	int ret;
+
+	if (!dd->accdet1_th_set) {
+		ret = abx500_set_register_interruptible(&dd->pdev->dev,
+				AB8500_ECI_AV_ACC,
+				AB8500_ACC_DET_DB1_REG,
+				dd->pdata->accdet1_dbth);
+		if (ret < 0)
+			dev_err(&dd->pdev->dev,
+				"%s: Failed to write reg (%d).\n", __func__,
+				ret);
+		else
+			dd->accdet1_th_set = 1;
+	}
+
+	/* enable accdetect1 comparator */
+	ret = abx500_mask_and_set_register_interruptible(
+				&dd->pdev->dev,
+				AB8500_ECI_AV_ACC,
+				AB8500_ACC_DET_CTRL_REG,
+				BITS_ACCDETCTRL1_ENA,
+				enable ? BITS_ACCDETCTRL1_ENA : 0);
+
+	if (ret < 0)
+		dev_err(&dd->pdev->dev,
+			"%s: Failed to update reg (%d).\n", __func__, ret);
+}
+
+/*
+ * returns the high level status whether some accessory is connected (1|0).
+ */
+static int ab8500_detect_plugged_in(struct abx500_ad *dd)
+{
+	u8 value = 0;
+
+	int status = abx500_get_register_interruptible(
+				&dd->pdev->dev,
+				AB8500_INTERRUPT,
+				AB8500_IT_SOURCE5_REG,
+				&value);
+	if (status < 0) {
+		dev_err(&dd->pdev->dev, "%s: reg read failed (%d).\n",
+			__func__, status);
+		return 0;
+	}
+
+	if (dd->pdata->is_detection_inverted)
+		return value & BIT_ITSOURCE5_ACCDET1 ? 1 : 0;
+	else
+		return value & BIT_ITSOURCE5_ACCDET1 ? 0 : 1;
+}
+
+#ifdef CONFIG_SND_SOC_UX500_AB8500
+
+/*
+ * meas_voltage_stable - measures relative stable voltage from spec. input
+ */
+static int ab8500_meas_voltage_stable(struct abx500_ad *dd)
+{
+	int ret, mv;
+
+	ret = ux500_ab8500_audio_gpadc_measure((struct ab8500_gpadc *)dd->gpadc,
+			ACC_DETECT2, false, &mv);
+
+	return (ret < 0) ? ret : mv;
+}
+
+/*
+ * meas_alt_voltage_stable - measures relative stable voltage from spec. input
+ */
+static int ab8500_meas_alt_voltage_stable(struct abx500_ad *dd)
+{
+	int ret, mv;
+
+	ret = ux500_ab8500_audio_gpadc_measure((struct ab8500_gpadc *)dd->gpadc,
+			ACC_DETECT2, true, &mv);
+
+	return (ret < 0) ? ret : mv;
+}
+
+#else
+
+/*
+ * meas_voltage_stable - measures relative stable voltage from spec. input
+ */
+static int ab8500_meas_voltage_stable(struct abx500_ad *dd)
+{
+	int iterations = 2;
+	int v1, v2, dv;
+
+	v1 = ab8500_gpadc_convert((struct ab8500_gpadc *)dd->gpadc,
+			ACC_DETECT2);
+	do {
+		msleep(1);
+		--iterations;
+		v2 = ab8500_gpadc_convert((struct ab8500_gpadc *)dd->gpadc,
+				ACC_DETECT2);
+		dv = abs(v2 - v1);
+		v1 = v2;
+	} while (iterations > 0 && dv > MAX_VOLT_DIFF);
+
+	return v1;
+}
+
+/*
+ * not implemented for non soc setups
+ */
+static int ab8500_meas_alt_voltage_stable(struct abx500_ad *dd)
+{
+	return -1;
+}
+
+#endif
+
+/*
+ * configures HW so that it is possible to make decision whether
+ * accessory is connected or not.
+ */
+static void ab8500_config_hw_test_plug_connected(struct abx500_ad *dd,
+		int enable)
+{
+	int ret;
+
+	dev_dbg(&dd->pdev->dev, "%s:%d\n", __func__, enable);
+
+	ret = ab8500_config_pulldown(&dd->pdev->dev,
+					dd->pdata->video_ctrl_gpio, !enable);
+	if (ret < 0) {
+		dev_err(&dd->pdev->dev,
+			"%s: Failed to update reg (%d).\n", __func__, ret);
+		return;
+	}
+
+	if (enable)
+		accessory_regulator_enable(dd, REGULATOR_VAMIC1);
+}
+
+/*
+ * configures HW so that carkit/headset detection can be accomplished.
+ */
+static void ab8500_config_hw_test_basic_carkit(struct abx500_ad *dd, int enable)
+{
+	int ret;
+
+	dev_dbg(&dd->pdev->dev, "%s:%d\n", __func__, enable);
+
+	if (enable)
+		accessory_regulator_disable(dd, REGULATOR_VAMIC1);
+
+	/* Un-Ground the VAMic1 output when enabled */
+	ret = abx500_mask_and_set_register_interruptible(
+				&dd->pdev->dev,
+				AB8500_REGU_CTRL1,
+				AB8500_REGU_CTRL1_SPARE_REG,
+				BIT_REGUCTRL1SPARE_VAMIC1_GROUND,
+				enable ? BIT_REGUCTRL1SPARE_VAMIC1_GROUND : 0);
+	if (ret < 0)
+		dev_err(&dd->pdev->dev,
+			"%s: Failed to update reg (%d).\n", __func__, ret);
+}
+
+/*
+ * sets the av switch direction - audio-in vs video-out
+ */
+static void ab8500_set_av_switch(struct abx500_ad *dd,
+		enum accessory_avcontrol_dir dir)
+{
+	int ret;
+
+	dev_dbg(&dd->pdev->dev, "%s: Enter (%d)\n", __func__, dir);
+	if (dir == NOT_SET) {
+		ret = gpio_direction_input(dd->pdata->video_ctrl_gpio);
+		dd->gpio35_dir_set = 0;
+		ret = gpio_direction_output(dd->pdata->video_ctrl_gpio, 0);
+		if (dd->pdata->mic_ctrl)
+			 gpio_direction_output(dd->pdata->mic_ctrl, 0);
+	} else if (!dd->gpio35_dir_set) {
+		ret = gpio_direction_output(dd->pdata->video_ctrl_gpio,
+						dir == AUDIO_IN ? 1 : 0);
+		if (ret < 0) {
+			dev_err(&dd->pdev->dev,
+				"%s: video_ctrl pin output config failed (%d).\n",
+								__func__, ret);
+			return;
+		}
+
+		if (dd->pdata->mic_ctrl) {
+			ret = gpio_direction_output(dd->pdata->mic_ctrl,
+					dir == AUDIO_IN ? 1 : 0);
+			if (ret < 0) {
+				dev_err(&dd->pdev->dev,
+						"%s: mic_ctrl pin output"
+						"config failed (%d).\n",
+						__func__, ret);
+				return;
+			}
+		}
+
+		dd->gpio35_dir_set = 1;
+		dev_dbg(&dd->pdev->dev, "AV-SWITCH: %s\n",
+			dir == AUDIO_IN ? "AUDIO_IN" : "VIDEO_OUT");
+	} else {
+		gpio_set_value(dd->pdata->video_ctrl_gpio,
+						dir == AUDIO_IN ? 1 : 0);
+	}
+}
+
+static u8 acc_det_ctrl_suspend_val;
+
+static void ab8500_turn_off_accdet_comparator(struct platform_device *pdev)
+{
+	struct abx500_ad *dd = platform_get_drvdata(pdev);
+
+	/* Turn off AccDetect comparators and pull-up */
+	(void) abx500_get_register_interruptible(
+			&dd->pdev->dev,
+			AB8500_ECI_AV_ACC,
+			AB8500_ACC_DET_CTRL_REG,
+			&acc_det_ctrl_suspend_val);
+	(void) abx500_set_register_interruptible(
+			&dd->pdev->dev,
+			AB8500_ECI_AV_ACC,
+			AB8500_ACC_DET_CTRL_REG,
+			0);
+
+}
+
+static void ab8500_turn_on_accdet_comparator(struct platform_device *pdev)
+{
+	struct abx500_ad *dd = platform_get_drvdata(pdev);
+
+	/* Turn on AccDetect comparators and pull-up */
+	(void) abx500_set_register_interruptible(
+			&dd->pdev->dev,
+			AB8500_ECI_AV_ACC,
+			AB8500_ACC_DET_CTRL_REG,
+			acc_det_ctrl_suspend_val);
+
+}
+
+static void *ab8500_accdet_abx500_gpadc_get(void)
+{
+	return ab8500_gpadc_get("ab8500-gpadc.0");
+}
+
+struct abx500_accdet_platform_data *
+	ab8500_get_platform_data(struct platform_device *pdev)
+{
+	struct ab8500_platform_data *plat;
+
+	plat = dev_get_platdata(pdev->dev.parent);
+
+	if (!plat || !plat->accdet) {
+		dev_err(&pdev->dev, "%s: Failed to get accdet plat data.\n",
+			__func__);
+		return ERR_PTR(-ENODEV);
+	}
+
+	return plat->accdet;
+}
+
+struct abx500_ad ab8500_accessory_det_callbacks = {
+	.irq_desc_norm			= ab8500_irq_desc_norm,
+	.irq_desc_inverted		= ab8500_irq_desc_inverted,
+	.no_irqs			= ARRAY_SIZE(ab8500_irq_desc_norm),
+	.regu_desc			= ab8500_regu_desc,
+	.no_of_regu_desc		= ARRAY_SIZE(ab8500_regu_desc),
+	.config_accdetect2_hw		= ab8500_config_accdetect2_hw,
+	.config_accdetect1_hw		= ab8500_config_accdetect1_hw,
+	.detect_plugged_in		= ab8500_detect_plugged_in,
+	.meas_voltage_stable		= ab8500_meas_voltage_stable,
+	.meas_alt_voltage_stable	= ab8500_meas_alt_voltage_stable,
+	.config_hw_test_basic_carkit	= ab8500_config_hw_test_basic_carkit,
+	.turn_off_accdet_comparator	= ab8500_turn_off_accdet_comparator,
+	.turn_on_accdet_comparator	= ab8500_turn_on_accdet_comparator,
+	.accdet_abx500_gpadc_get	= ab8500_accdet_abx500_gpadc_get,
+	.config_hw_test_plug_connected	= ab8500_config_hw_test_plug_connected,
+	.set_av_switch			= ab8500_set_av_switch,
+	.get_platform_data		= ab8500_get_platform_data,
+};
+
+MODULE_DESCRIPTION("AB8500 AV Accessory detection driver");
+MODULE_ALIAS("platform:ab8500-acc-det");
+MODULE_AUTHOR("ST-Ericsson");
+MODULE_LICENSE("GPL v2");