diff options
Diffstat (limited to 'drivers/net/wireless/rt2x00/rt2800lib.c')
| -rw-r--r-- | drivers/net/wireless/rt2x00/rt2800lib.c | 130 |
1 files changed, 125 insertions, 5 deletions
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index b66e0fd8f0f..3a150d3a9d9 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -1,4 +1,5 @@ /* + Copyright (C) 2010 Willow Garage <http://www.willowgarage.com> Copyright (C) 2010 Ivo van Doorn <IvDoorn@gmail.com> Copyright (C) 2009 Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Copyright (C) 2009 Gertjan van Wingerde <gwingerde@gmail.com> @@ -427,8 +428,10 @@ int rt2800_load_firmware(struct rt2x00_dev *rt2x00dev, } EXPORT_SYMBOL_GPL(rt2800_load_firmware); -void rt2800_write_txwi(__le32 *txwi, struct txentry_desc *txdesc) +void rt2800_write_tx_data(struct queue_entry *entry, + struct txentry_desc *txdesc) { + __le32 *txwi = rt2800_drv_get_txwi(entry); u32 word; /* @@ -437,7 +440,8 @@ void rt2800_write_txwi(__le32 *txwi, struct txentry_desc *txdesc) rt2x00_desc_read(txwi, 0, &word); rt2x00_set_field32(&word, TXWI_W0_FRAG, test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags)); - rt2x00_set_field32(&word, TXWI_W0_MIMO_PS, 0); + rt2x00_set_field32(&word, TXWI_W0_MIMO_PS, + test_bit(ENTRY_TXD_HT_MIMO_PS, &txdesc->flags)); rt2x00_set_field32(&word, TXWI_W0_CF_ACK, 0); rt2x00_set_field32(&word, TXWI_W0_TS, test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags)); @@ -478,7 +482,7 @@ void rt2800_write_txwi(__le32 *txwi, struct txentry_desc *txdesc) _rt2x00_desc_write(txwi, 2, 0 /* skbdesc->iv[0] */); _rt2x00_desc_write(txwi, 3, 0 /* skbdesc->iv[1] */); } -EXPORT_SYMBOL_GPL(rt2800_write_txwi); +EXPORT_SYMBOL_GPL(rt2800_write_tx_data); static int rt2800_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxwi_w2) { @@ -490,7 +494,7 @@ static int rt2800_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxwi_w2) u8 offset1; u8 offset2; - if (rt2x00dev->rx_status.band == IEEE80211_BAND_2GHZ) { + if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ) { rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG, &eeprom); offset0 = rt2x00_get_field16(eeprom, EEPROM_RSSI_BG_OFFSET0); offset1 = rt2x00_get_field16(eeprom, EEPROM_RSSI_BG_OFFSET1); @@ -569,6 +573,122 @@ void rt2800_process_rxwi(struct queue_entry *entry, } EXPORT_SYMBOL_GPL(rt2800_process_rxwi); +void rt2800_txdone(struct rt2x00_dev *rt2x00dev) +{ + struct data_queue *queue; + struct queue_entry *entry; + __le32 *txwi; + struct txdone_entry_desc txdesc; + u32 word; + u32 reg; + int wcid, ack, pid, tx_wcid, tx_ack, tx_pid; + u16 mcs, real_mcs; + int i; + + /* + * TX_STA_FIFO is a stack of X entries, hence read TX_STA_FIFO + * at most X times and also stop processing once the TX_STA_FIFO_VALID + * flag is not set anymore. + * + * The legacy drivers use X=TX_RING_SIZE but state in a comment + * that the TX_STA_FIFO stack has a size of 16. We stick to our + * tx ring size for now. + */ + for (i = 0; i < TX_ENTRIES; i++) { + rt2800_register_read(rt2x00dev, TX_STA_FIFO, ®); + if (!rt2x00_get_field32(reg, TX_STA_FIFO_VALID)) + break; + + wcid = rt2x00_get_field32(reg, TX_STA_FIFO_WCID); + ack = rt2x00_get_field32(reg, TX_STA_FIFO_TX_ACK_REQUIRED); + pid = rt2x00_get_field32(reg, TX_STA_FIFO_PID_TYPE); + + /* + * Skip this entry when it contains an invalid + * queue identication number. + */ + if (pid <= 0 || pid > QID_RX) + continue; + + queue = rt2x00queue_get_queue(rt2x00dev, pid - 1); + if (unlikely(!queue)) + continue; + + /* + * Inside each queue, we process each entry in a chronological + * order. We first check that the queue is not empty. + */ + entry = NULL; + while (!rt2x00queue_empty(queue)) { + entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE); + if (!test_bit(ENTRY_DATA_IO_FAILED, &entry->flags)) + break; + + rt2x00lib_txdone_noinfo(entry, TXDONE_FAILURE); + } + + if (!entry || rt2x00queue_empty(queue)) + break; + + /* + * Check if we got a match by looking at WCID/ACK/PID + * fields + */ + txwi = rt2800_drv_get_txwi(entry); + + rt2x00_desc_read(txwi, 1, &word); + tx_wcid = rt2x00_get_field32(word, TXWI_W1_WIRELESS_CLI_ID); + tx_ack = rt2x00_get_field32(word, TXWI_W1_ACK); + tx_pid = rt2x00_get_field32(word, TXWI_W1_PACKETID); + + if ((wcid != tx_wcid) || (ack != tx_ack) || (pid != tx_pid)) + WARNING(rt2x00dev, "invalid TX_STA_FIFO content"); + + /* + * Obtain the status about this packet. + */ + txdesc.flags = 0; + rt2x00_desc_read(txwi, 0, &word); + mcs = rt2x00_get_field32(word, TXWI_W0_MCS); + mcs = rt2x00_get_field32(reg, TX_STA_FIFO_MCS); + real_mcs = rt2x00_get_field32(reg, TX_STA_FIFO_MCS); + + /* + * Ralink has a retry mechanism using a global fallback + * table. We setup this fallback table to try the immediate + * lower rate for all rates. In the TX_STA_FIFO, the MCS field + * always contains the MCS used for the last transmission, be + * it successful or not. + */ + if (rt2x00_get_field32(reg, TX_STA_FIFO_TX_SUCCESS)) { + /* + * Transmission succeeded. The number of retries is + * mcs - real_mcs + */ + __set_bit(TXDONE_SUCCESS, &txdesc.flags); + txdesc.retry = ((mcs > real_mcs) ? mcs - real_mcs : 0); + } else { + /* + * Transmission failed. The number of retries is + * always 7 in this case (for a total number of 8 + * frames sent). + */ + __set_bit(TXDONE_FAILURE, &txdesc.flags); + txdesc.retry = rt2x00dev->long_retry; + } + + /* + * the frame was retried at least once + * -> hw used fallback rates + */ + if (txdesc.retry) + __set_bit(TXDONE_FALLBACK, &txdesc.flags); + + rt2x00lib_txdone(entry, &txdesc); + } +} +EXPORT_SYMBOL_GPL(rt2800_txdone); + void rt2800_write_beacon(struct queue_entry *entry, struct txentry_desc *txdesc) { struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; @@ -600,7 +720,7 @@ void rt2800_write_beacon(struct queue_entry *entry, struct txentry_desc *txdesc) /* * Add the TXWI for the beacon to the skb. */ - rt2800_write_txwi((__le32 *)entry->skb->data, txdesc); + rt2800_write_tx_data(entry, txdesc); /* * Dump beacon to userspace through debugfs. |