diff options
Diffstat (limited to 'drivers/staging/nmf-cm/cm/engine/configuration/inc')
3 files changed, 163 insertions, 0 deletions
diff --git a/drivers/staging/nmf-cm/cm/engine/configuration/inc/configuration.h b/drivers/staging/nmf-cm/cm/engine/configuration/inc/configuration.h new file mode 100644 index 00000000000..98d22bba743 --- /dev/null +++ b/drivers/staging/nmf-cm/cm/engine/configuration/inc/configuration.h @@ -0,0 +1,37 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * Author: Jean-Philippe FASSINO <jean-philippe.fassino@stericsson.com> for ST-Ericsson. + * License terms: GNU General Public License (GPL) version 2. + */ +/** + * \internal + */ +#ifndef __INC_CONFIGURATION_H_ +#define __INC_CONFIGURATION_H_ + +#include <cm/engine/api/control/configuration_engine.h> +#include <cm/engine/memory/inc/memory.h> +#include <inc/nmf-limits.h> +#include <cm/engine/dsp/inc/dsp.h> + +/******************************************************************************/ +/************************ FUNCTIONS PROTOTYPES ********************************/ +/******************************************************************************/ + +PUBLIC t_cm_error cm_CFG_ConfigureMediaProcessorCore(t_nmf_core_id coreId, + t_nmf_executive_engine_id executiveEngineId, + t_nmf_semaphore_type_id semaphoreTypeId, t_uint8 nbYramBanks, + const t_cm_system_address *mediaProcessorMappingBaseAddr, + const t_cm_domain_id eeDomain, + t_dsp_allocator_desc* sdramCodeAllocId, + t_dsp_allocator_desc* sdramDataAllocId + ); + +PUBLIC t_cm_error cm_CFG_AddMpcSdramSegment(const t_nmf_memory_segment *pDesc, + const char *memoryname, t_dsp_allocator_desc **allocDesc); + +PUBLIC t_cm_error cm_CFG_CheckMpcStatus(t_nmf_core_id coreId); + +void cm_CFG_ReleaseMpc(t_nmf_core_id coreId); + +#endif /* __INC_CONFIGURATION_H_ */ diff --git a/drivers/staging/nmf-cm/cm/engine/configuration/inc/configuration_status.h b/drivers/staging/nmf-cm/cm/engine/configuration/inc/configuration_status.h new file mode 100644 index 00000000000..0c75b9c49b0 --- /dev/null +++ b/drivers/staging/nmf-cm/cm/engine/configuration/inc/configuration_status.h @@ -0,0 +1,45 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * Author: Jean-Philippe FASSINO <jean-philippe.fassino@stericsson.com> for ST-Ericsson. + * License terms: GNU General Public License (GPL) version 2. + */ +/** + * \internal + */ +#ifndef __INC_CONFIGSTATUS_H_ +#define __INC_CONFIGSTATUS_H + +#include <cm/inc/cm_type.h> +#include <cm/engine/utils/inc/string.h> + +/* + * Variable to active intensive check + * + * \ingroup CM_CONFIGURATION_API + */ +extern t_sint32 cmIntensiveCheckState; + +/* + * Variable to active trace level + * + * \ingroup CM_CONFIGURATION_API + */ +extern t_sint32 cm_debug_level; + +/* + * Variable to active error break + * + * \ingroup CM_CONFIGURATION_API + */ +extern t_sint32 cm_error_break; + +/* + * Variable to activate Ulp + * + * \ingroup CM_CONFIGURATION_API + */ +extern t_bool cmUlpEnable; + +extern t_dup_char anonymousDup, eventDup, skeletonDup, stubDup, traceDup; + +#endif diff --git a/drivers/staging/nmf-cm/cm/engine/configuration/inc/configuration_type.h b/drivers/staging/nmf-cm/cm/engine/configuration/inc/configuration_type.h new file mode 100644 index 00000000000..af29d584ba4 --- /dev/null +++ b/drivers/staging/nmf-cm/cm/engine/configuration/inc/configuration_type.h @@ -0,0 +1,81 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * Author: Jean-Philippe FASSINO <jean-philippe.fassino@stericsson.com> for ST-Ericsson. + * License terms: GNU General Public License (GPL), version 2, with + * user space exemption described in the top-level COPYING file in + * the Linux kernel source tree. + */ +/*! + * \brief Configuration Component Manager API type. + */ +#ifndef CONFIGURATION_TYPE_H +#define CONFIGURATION_TYPE_H + +#include <cm/inc/cm_type.h> + +/*! + * @defgroup t_cm_cmd_id t_cm_cmd_id + * \brief Definition of the command ID + * \ingroup CM_CONFIGURATION_API + * + * CM_CMD_XXX designates the command ID used by the \ref CM_SetMode routine. + * + * \remarks Other command IDs are not yet implemented. + */ + +typedef t_uint32 t_cm_cmd_id; //!< Fake enumeration type \ingroup t_cm_cmd_id +#define CM_CMD_SYNC ((t_cm_cmd_id)0x01) //!< Synchronize on-going operations (no parameter) \ingroup t_cm_cmd_id + +#define CM_CMD_WARM_RESET ((t_cm_cmd_id)0x02) //!< Reset a part of the CM-engine (parameter indicates the part which must be reseted) \ingroup t_cm_cmd_id + +#define CM_CMD_PWR_MGR ((t_cm_cmd_id)0x10) //!< Enable/Disable the internal power management module (0=Disable, 1=Enable) \ingroup t_cm_cmd_id + +#define CM_CMD_DBG_MODE ((t_cm_cmd_id)0x40) //!< Enable/Disable DEBUG mode, Pwr Mgr is also disabled (0=Disable, 1=Enable) \ingroup t_cm_cmd_id + +#define CM_CMD_TRACE_ON ((t_cm_cmd_id)0x41) //!< Enable STM/XTI tracing and force network resetting and dumping \note Since MPC trace will be usable, you can enable them if not \ingroup t_cm_cmd_id +#define CM_CMD_TRACE_OFF ((t_cm_cmd_id)0x42) //!< Disable STM/XTI tracing \note Since MPC trace will not be usable, you can also disable them \ingroup t_cm_cmd_id + +#define CM_CMD_MPC_TRACE_ON ((t_cm_cmd_id)0x50) //!< Enable MPC STM/XTI tracing (param == coreId). \note This command is not execute if execution engine not started on the coreId \ingroup t_cm_cmd_id +#define CM_CMD_MPC_TRACE_OFF ((t_cm_cmd_id)0x51) //!< Disable MPC STM/XTI tracing (param == coreId) This is the default configuration. \note This command is not execute if execution engine not started on the coreId \ingroup t_cm_cmd_id + +#define CM_CMD_MPC_PRINT_OFF ((t_cm_cmd_id)0x52) //!< Set to OFF the level of MPC traces (param == coreId) \note This command is not execute if execution engine not started on the coreId \ingroup t_cm_cmd_id +#define CM_CMD_MPC_PRINT_ERROR ((t_cm_cmd_id)0x53) //!< Set to ERROR the level of MPC traces param == coreId) \note This command is not execute if execution engine not started on the coreId \ingroup t_cm_cmd_id +#define CM_CMD_MPC_PRINT_WARNING ((t_cm_cmd_id)0x54) //!< Set to WARNING the level of MPC traces param == coreId) \note This command is not execute if execution engine not started on the coreId \ingroup t_cm_cmd_id +#define CM_CMD_MPC_PRINT_INFO ((t_cm_cmd_id)0x55) //!< Set to INFO the level of MPC traces (param == coreId) \note This command is not execute if execution engine not started on the coreId This is the default configuration. \ingroup t_cm_cmd_id +#define CM_CMD_MPC_PRINT_VERBOSE ((t_cm_cmd_id)0x56) //!< Set to VERBOSE the level of MPC traces param == coreId) \note This command is not execute if execution engine not started on the coreId \ingroup t_cm_cmd_id + +/*! + * \brief Define the level of internal CM log traces + * + * Define the level of internal CM log traces (-1 to 3) + * -# <b>-1 </b> all internal LOG/ERROR traces are disabled + * -# <b> 0 </b> all internal LOG traces are disabled (<b>default/reset value</b>) + * -# <b> 1, 2, 3 </b> Most and most + * + * \ingroup t_cm_cmd_id + */ +#define CM_CMD_TRACE_LEVEL ((t_cm_cmd_id)0x80) + +/*! + * \brief Enable/Disable intensive internal check + * + * Enable/Disable intensive internal check (0=Disable, 1=Enable): + * - Component handle checking + * + * Must be used during the integration phase (additional process is time consuming). + * + * \ingroup t_cm_cmd_id + */ +#define CM_CMD_INTENSIVE_CHECK ((t_cm_cmd_id)0x100) + +/*! + * \brief Enable/Disable ulp mode + * + * Enable/Disable Ultra Low Power mode. + * + * \ingroup t_cm_cmd_id + */ +#define CM_CMD_ULP_MODE_ON ((t_cm_cmd_id)0x111) //!< Enable ULP mode \ingroup t_cm_cmd_id +#define CM_CMD_ULP_MODE_OFF ((t_cm_cmd_id)0x110) //!< Deprecated (must be removed in 2.10) !!! + +#endif /* CONFIGURATION_TYPE_H */ |