diff options
Diffstat (limited to 'drivers/video/b2r2/b2r2_core.h')
| -rw-r--r-- | drivers/video/b2r2/b2r2_core.h | 192 |
1 files changed, 192 insertions, 0 deletions
diff --git a/drivers/video/b2r2/b2r2_core.h b/drivers/video/b2r2/b2r2_core.h index 991dd9d9d1b..5b9fdcdc2bb 100644 --- a/drivers/video/b2r2/b2r2_core.h +++ b/drivers/video/b2r2/b2r2_core.h @@ -18,6 +18,194 @@ #include <linux/wait.h> #include <linux/workqueue.h> +/** + * B2R2_RESET_TIMEOUT_VALUE - The number of times to read the status register + * waiting for b2r2 to go idle after soft reset. + */ +#define B2R2_RESET_TIMEOUT_VALUE (1500) + +/** + * B2R2_CLK_FLAG - Value to write into clock reg to turn clock on + */ +#define B2R2_CLK_FLAG (0x125) + +/** + * DEBUG_CHECK_ADDREF_RELEASE - Define this to enable addref / release debug + */ +#define DEBUG_CHECK_ADDREF_RELEASE 1 + +#ifdef CONFIG_DEBUG_FS +/** + * HANDLE_TIMEOUTED_JOBS - Define this to check jobs for timeout and cancel them + */ +#define HANDLE_TIMEOUTED_JOBS +#define JOB_TIMEOUT (HZ/2) +#endif + +/** + * B2R2_CLOCK_ALWAYS_ON - Define this to disable power save clock turn off + */ +/* #define B2R2_CLOCK_ALWAYS_ON 1 */ + +/** + * START_SENTINEL - Watch guard to detect job overwrites + */ +#define START_SENTINEL 0xBABEDEEA + +/** + * STOP_SENTINEL - Watch guard to detect job overwrites + */ +#define END_SENTINEL 0xDADBDCDD + +/** + * B2R2_CORE_LOWEST_PRIO - Lowest prio allowed + */ +#define B2R2_CORE_LOWEST_PRIO -19 +/** + * B2R2_CORE_HIGHEST_PRIO - Highest prio allowed + */ +#define B2R2_CORE_HIGHEST_PRIO 20 + +/** + * B2R2_DOMAIN_DISABLE - + */ +#define B2R2_DOMAIN_DISABLE_TIMEOUT (HZ/100) + +/** + * B2R2_REGULATOR_RETRY_COUNT - + */ +#define B2R2_REGULATOR_RETRY_COUNT 10 + + +#ifdef DEBUG_CHECK_ADDREF_RELEASE + +/** + * struct addref_release - Represents one addref or release. Used + * to debug addref / release problems + * + * @addref: true if this represents an addref else it represents + * a release. + * @job: The job that was referenced + * @caller: The caller of the addref or release + * @ref_count: The job reference count after addref / release + */ +struct addref_release { + bool addref; + struct b2r2_core_job *job; + const char *caller; + int ref_count; +}; + +#endif + +/** + * struct b2r2_core - Administration data for B2R2 core + * + * @lock: Spin lock protecting the b2r2_core structure and the B2R2 HW + * @hw: B2R2 registers memory mapped + * @pmu_b2r2_clock: Control of B2R2 clock + * @log_dev: Device used for logging via dev_... functions + * + * @prio_queue: Queue of jobs sorted in priority order + * @active_jobs: Array containing pointer to zero or one job per queue + * @n_active_jobs: Number of active jobs + * @jiffies_last_active: jiffie value when adding last active job + * @jiffies_last_irq: jiffie value when last irq occured + * @timeout_work: Work structure for timeout work + * + * @next_job_id: Contains the job id that will be assigned to the next + * added job. + * + * @clock_request_count: When non-zero, clock is on + * @clock_off_timer: Kernel timer to handle delayed turn off of clock + * + * @work_queue: Work queue to handle done jobs (callbacks) and timeouts in + * non-interrupt context. + * + * @stat_n_irq: Number of interrupts (statistics) + * @stat_n_jobs_added: Number of jobs added (statistics) + * @stat_n_jobs_removed: Number of jobs removed (statistics) + * @stat_n_jobs_in_prio_list: Number of jobs in prio list (statistics) + * + * @debugfs_root_dir: Root directory for B2R2 debugfs + * + * @ar: Circular array of addref / release debug structs + * @ar_write: Where next write will occur + * @ar_read: First valid place to read. When ar_read == ar_write then + * the array is empty. + */ +struct b2r2_core { + spinlock_t lock; + + struct b2r2_memory_map *hw; + + u8 op_size; + u8 ch_size; + u8 pg_size; + u8 mg_size; + u16 min_req_time; + int irq; + + char name[16]; + struct device *dev; + + struct list_head prio_queue; + + struct b2r2_core_job *active_jobs[B2R2_CORE_QUEUE_NO_OF]; + unsigned long n_active_jobs; + + unsigned long jiffies_last_active; + unsigned long jiffies_last_irq; +#ifdef HANDLE_TIMEOUTED_JOBS + struct delayed_work timeout_work; +#endif + int next_job_id; + + unsigned long clock_request_count; + struct timer_list clock_off_timer; + + struct workqueue_struct *work_queue; + + /* Statistics */ + unsigned long stat_n_irq_exit; + unsigned long stat_n_irq_skipped; + unsigned long stat_n_irq; + unsigned long stat_n_jobs_added; + unsigned long stat_n_jobs_removed; + + unsigned long stat_n_jobs_in_prio_list; + +#ifdef CONFIG_DEBUG_FS + struct dentry *debugfs_root_dir; + struct dentry *debugfs_core_root_dir; + struct dentry *debugfs_regs_dir; +#endif + +#ifdef DEBUG_CHECK_ADDREF_RELEASE + /* Tracking release bug...*/ + struct addref_release ar[100]; + int ar_write; + int ar_read; +#endif + + /* Power management variables */ + struct mutex domain_lock; + struct delayed_work domain_disable_work; + + /* + * We need to keep track of both the number of domain_enable/disable() + * calls and whether the power was actually turned off, since the + * power off is done in a delayed job. + */ + bool domain_enabled; + volatile bool valid; + int domain_request_count; + + struct clk *b2r2_clock; + struct regulator *b2r2_reg; + + struct b2r2_control *control; +}; /** * b2r2_core_job_add() - Adds a job to B2R2 job queues @@ -105,4 +293,8 @@ void b2r2_core_job_addref(struct b2r2_core_job *job, const char *caller); */ void b2r2_core_job_release(struct b2r2_core_job *job, const char *caller); +void b2r2_core_print_stats(struct b2r2_core *core); + +void b2r2_core_release(struct kref *control_ref); + #endif /* !defined(__B2R2_CORE_JOB_H__) */ |