diff options
Diffstat (limited to 'include/linux/mfd/db8500-prcmu.h')
| -rw-r--r-- | include/linux/mfd/db8500-prcmu.h | 233 |
1 files changed, 100 insertions, 133 deletions
diff --git a/include/linux/mfd/db8500-prcmu.h b/include/linux/mfd/db8500-prcmu.h index 60d27f7bfc1..260537fbc54 100644 --- a/include/linux/mfd/db8500-prcmu.h +++ b/include/linux/mfd/db8500-prcmu.h @@ -11,6 +11,24 @@ #define __MFD_DB8500_PRCMU_H #include <linux/interrupt.h> +#include <linux/bitops.h> + +/* + * Registers + */ +#define DB8500_PRCM_GPIOCR 0x138 +#define DB8500_PRCM_GPIOCR_DBG_UARTMOD_CMD0 BIT(0) +#define DB8500_PRCM_GPIOCR_DBG_STM_APE_CMD BIT(9) +#define DB8500_PRCM_GPIOCR_DBG_STM_MOD_CMD1 BIT(11) +#define DB8500_PRCM_GPIOCR_SPI2_SELECT BIT(23) + +#define DB8500_PRCM_LINE_VALUE 0x170 +#define DB8500_PRCM_LINE_VALUE_HSI_CAWAKE0 BIT(3) + +#define DB8500_PRCM_DSI_SW_RESET 0x324 +#define DB8500_PRCM_DSI_SW_RESET_DSI0_SW_RESETN BIT(0) +#define DB8500_PRCM_DSI_SW_RESET_DSI1_SW_RESETN BIT(1) +#define DB8500_PRCM_DSI_SW_RESET_DSI2_SW_RESETN BIT(2) /* This portion previously known as <mach/prcmu-fw-defs_v1.h> */ @@ -163,84 +181,6 @@ enum hw_acc_state { }; /** - * enum mbox_2_arm_stat - Status messages definition for mbox_arm - * @BOOT_TO_EXECUTEOK: The apBoot to apExecute state transition has been - * completed - * @DEEPSLEEPOK: The apExecute to apDeepSleep state transition has been - * completed - * @SLEEPOK: The apExecute to apSleep state transition has been completed - * @IDLEOK: The apExecute to apIdle state transition has been completed - * @SOFTRESETOK: The A9 watchdog/ SoftReset state has been completed - * @SOFTRESETGO : The A9 watchdog/SoftReset state is on going - * @BOOT_TO_EXECUTE: The apBoot to apExecute state transition is on going - * @EXECUTE_TO_DEEPSLEEP: The apExecute to apDeepSleep state transition is on - * going - * @DEEPSLEEP_TO_EXECUTE: The apDeepSleep to apExecute state transition is on - * going - * @DEEPSLEEP_TO_EXECUTEOK: The apDeepSleep to apExecute state transition has - * been completed - * @EXECUTE_TO_SLEEP: The apExecute to apSleep state transition is on going - * @SLEEP_TO_EXECUTE: The apSleep to apExecute state transition is on going - * @SLEEP_TO_EXECUTEOK: The apSleep to apExecute state transition has been - * completed - * @EXECUTE_TO_IDLE: The apExecute to apIdle state transition is on going - * @IDLE_TO_EXECUTE: The apIdle to apExecute state transition is on going - * @IDLE_TO_EXECUTEOK: The apIdle to apExecute state transition has been - * completed - * @INIT_STATUS: Status init - */ -enum ap_pwrsttr_status { - BOOT_TO_EXECUTEOK = 0xFF, - DEEPSLEEPOK = 0xFE, - SLEEPOK = 0xFD, - IDLEOK = 0xFC, - SOFTRESETOK = 0xFB, - SOFTRESETGO = 0xFA, - BOOT_TO_EXECUTE = 0xF9, - EXECUTE_TO_DEEPSLEEP = 0xF8, - DEEPSLEEP_TO_EXECUTE = 0xF7, - DEEPSLEEP_TO_EXECUTEOK = 0xF6, - EXECUTE_TO_SLEEP = 0xF5, - SLEEP_TO_EXECUTE = 0xF4, - SLEEP_TO_EXECUTEOK = 0xF3, - EXECUTE_TO_IDLE = 0xF2, - IDLE_TO_EXECUTE = 0xF1, - IDLE_TO_EXECUTEOK = 0xF0, - RDYTODS_RETURNTOEXE = 0xEF, - NORDYTODS_RETURNTOEXE = 0xEE, - EXETOSLEEP_RETURNTOEXE = 0xED, - EXETOIDLE_RETURNTOEXE = 0xEC, - INIT_STATUS = 0xEB, - - /*error messages */ - INITERROR = 0x00, - PLLARMLOCKP_ER = 0x01, - PLLDDRLOCKP_ER = 0x02, - PLLSOCLOCKP_ER = 0x03, - PLLSOCK1LOCKP_ER = 0x04, - ARMWFI_ER = 0x05, - SYSCLKOK_ER = 0x06, - I2C_NACK_DATA_ER = 0x07, - BOOT_ER = 0x08, - I2C_STATUS_ALWAYS_1 = 0x0A, - I2C_NACK_REG_ADDR_ER = 0x0B, - I2C_NACK_DATA0123_ER = 0x1B, - I2C_NACK_ADDR_ER = 0x1F, - CURAPPWRSTISNOT_BOOT = 0x20, - CURAPPWRSTISNOT_EXECUTE = 0x21, - CURAPPWRSTISNOT_SLEEPMODE = 0x22, - CURAPPWRSTISNOT_CORRECTFORIT10 = 0x23, - FIFO4500WUISNOT_WUPEVENT = 0x24, - PLL32KLOCKP_ER = 0x29, - DDRDEEPSLEEPOK_ER = 0x2A, - ROMCODEREADY_ER = 0x50, - WUPBEFOREDS = 0x51, - DDRCONFIG_ER = 0x52, - WUPBEFORESLEEP = 0x53, - WUPBEFOREIDLE = 0x54 -}; /* earlier called as mbox_2_arm_stat */ - -/** * enum dvfs_stat - DVFS status messages definition * @DVFS_GO: A state transition DVFS is on going * @DVFS_ARM100OPPOK: The state transition DVFS has been completed for 100OPP @@ -457,6 +397,25 @@ enum hw_acc_dev { NUM_HW_ACC }; +/** + * enum prcmu_power_status - results from set_power_state + * @PRCMU_SLEEP_OK: Sleep went ok + * @PRCMU_DEEP_SLEEP_OK: DeepSleep went ok + * @PRCMU_IDLE_OK: Idle went ok + * @PRCMU_DEEPIDLE_OK: DeepIdle went ok + * @PRCMU_PRCMU2ARMPENDINGIT_ER: Pending interrupt detected + * @PRCMU_ARMPENDINGIT_ER: Pending interrupt detected + * + */ +enum prcmu_power_status { + PRCMU_SLEEP_OK = 0xf3, + PRCMU_DEEP_SLEEP_OK = 0xf6, + PRCMU_IDLE_OK = 0xf0, + PRCMU_DEEPIDLE_OK = 0xe3, + PRCMU_PRCMU2ARMPENDINGIT_ER = 0x91, + PRCMU_ARMPENDINGIT_ER = 0x93, +}; + /* * Definitions for autonomous power management configuration. */ @@ -493,6 +452,18 @@ struct prcmu_auto_pm_config { u8 sva_policy; }; +#define PRCMU_FW_PROJECT_U8500 2 +#define PRCMU_FW_PROJECT_U9500 4 +#define PRCMU_FW_PROJECT_U8500_C2 7 +#define PRCMU_FW_PROJECT_U9500_C2 11 + +struct prcmu_fw_version { + u8 project; + u8 api_version; + u8 func_version; + u8 errata; +}; + #ifdef CONFIG_MFD_DB8500_PRCMU void db8500_prcmu_early_init(void); @@ -500,42 +471,36 @@ int prcmu_set_rc_a2p(enum romcode_write); enum romcode_read prcmu_get_rc_p2a(void); enum ap_pwrst prcmu_get_xp70_current_state(void); bool prcmu_has_arm_maxopp(void); -bool prcmu_is_u8400(void); -int prcmu_set_ape_opp(u8 opp); -int prcmu_get_ape_opp(void); +struct prcmu_fw_version *prcmu_get_fw_version(void); int prcmu_request_ape_opp_100_voltage(bool enable); int prcmu_release_usb_wakeup_state(void); -int prcmu_set_ddr_opp(u8 opp); -int prcmu_get_ddr_opp(void); /* NOTE! Use regulator framework instead */ int prcmu_set_hwacc(u16 hw_acc_dev, u8 state); void prcmu_configure_auto_pm(struct prcmu_auto_pm_config *sleep, struct prcmu_auto_pm_config *idle); bool prcmu_is_auto_pm_enabled(void); -int prcmu_config_clkout(u8 clkout, u8 source, u8 div); -int prcmu_set_clock_divider(u8 clock, u8 divider); -int prcmu_config_hotdog(u8 threshold); -int prcmu_config_hotmon(u8 low, u8 high); -int prcmu_start_temp_sense(u16 cycles32k); -int prcmu_stop_temp_sense(void); + +int db8500_prcmu_config_hotdog(u8 threshold); +int db8500_prcmu_config_hotmon(u8 low, u8 high); +int db8500_prcmu_start_temp_sense(u16 cycles32k); +int db8500_prcmu_stop_temp_sense(void); int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size); void prcmu_ac_wake_req(void); void prcmu_ac_sleep_req(void); -void prcmu_modem_reset(void); -void prcmu_enable_spi2(void); -void prcmu_disable_spi2(void); +void db8500_prcmu_modem_reset(void); -int prcmu_config_a9wdog(u8 num, bool sleep_auto_off); -int prcmu_enable_a9wdog(u8 id); -int prcmu_disable_a9wdog(u8 id); -int prcmu_kick_a9wdog(u8 id); -int prcmu_load_a9wdog(u8 id, u32 val); +int db8500_prcmu_config_a9wdog(u8 num, bool sleep_auto_off); +int db8500_prcmu_enable_a9wdog(u8 id); +int db8500_prcmu_disable_a9wdog(u8 id); +int db8500_prcmu_kick_a9wdog(u8 id); +int db8500_prcmu_load_a9wdog(u8 id, u32 val); void db8500_prcmu_system_reset(u16 reset_code); int db8500_prcmu_set_power_state(u8 state, bool keep_ulp_clk, bool keep_ap_pll); +u8 db8500_prcmu_get_power_state_result(void); void db8500_prcmu_enable_wakeups(u32 wakeups); int db8500_prcmu_set_epod(u16 epod_id, u8 epod_state); int db8500_prcmu_request_clock(u8 clock, bool enable); @@ -549,6 +514,14 @@ u16 db8500_prcmu_get_reset_code(void); bool db8500_prcmu_is_ac_wake_requested(void); int db8500_prcmu_set_arm_opp(u8 opp); int db8500_prcmu_get_arm_opp(void); +int db8500_prcmu_set_ape_opp(u8 opp); +int db8500_prcmu_get_ape_opp(void); +int db8500_prcmu_set_ddr_opp(u8 opp); +int db8500_prcmu_get_ddr_opp(void); + +u32 db8500_prcmu_read(unsigned int reg); +void db8500_prcmu_write(unsigned int reg, u32 value); +void db8500_prcmu_write_masked(unsigned int reg, u32 mask, u32 value); #else /* !CONFIG_MFD_DB8500_PRCMU */ @@ -574,17 +547,17 @@ static inline bool prcmu_has_arm_maxopp(void) return false; } -static inline bool prcmu_is_u8400(void) +static inline struct prcmu_fw_version *prcmu_get_fw_version(void) { - return false; + return NULL; } -static inline int prcmu_set_ape_opp(u8 opp) +static inline int db8500_prcmu_set_ape_opp(u8 opp) { return 0; } -static inline int prcmu_get_ape_opp(void) +static inline int db8500_prcmu_get_ape_opp(void) { return APE_100_OPP; } @@ -599,12 +572,12 @@ static inline int prcmu_release_usb_wakeup_state(void) return 0; } -static inline int prcmu_set_ddr_opp(u8 opp) +static inline int db8500_prcmu_set_ddr_opp(u8 opp) { return 0; } -static inline int prcmu_get_ddr_opp(void) +static inline int db8500_prcmu_get_ddr_opp(void) { return DDR_100_OPP; } @@ -613,7 +586,6 @@ static inline int prcmu_set_hwacc(u16 hw_acc_dev, u8 state) { return 0; } - static inline void prcmu_configure_auto_pm(struct prcmu_auto_pm_config *sleep, struct prcmu_auto_pm_config *idle) { @@ -624,32 +596,22 @@ static inline bool prcmu_is_auto_pm_enabled(void) return false; } -static inline int prcmu_config_clkout(u8 clkout, u8 source, u8 div) -{ - return 0; -} - -static inline int prcmu_set_clock_divider(u8 clock, u8 divider) -{ - return 0; -} - -static inline int prcmu_config_hotdog(u8 threshold) +static inline int db8500_prcmu_config_hotdog(u8 threshold) { return 0; } -static inline int prcmu_config_hotmon(u8 low, u8 high) +static inline int db8500_prcmu_config_hotmon(u8 low, u8 high) { return 0; } -static inline int prcmu_start_temp_sense(u16 cycles32k) +static inline int db8500_prcmu_start_temp_sense(u16 cycles32k) { return 0; } -static inline int prcmu_stop_temp_sense(void) +static inline int db8500_prcmu_stop_temp_sense(void) { return 0; } @@ -668,22 +630,17 @@ static inline void prcmu_ac_wake_req(void) {} static inline void prcmu_ac_sleep_req(void) {} -static inline void prcmu_modem_reset(void) {} +static inline void db8500_prcmu_modem_reset(void) {} -static inline int prcmu_enable_spi2(void) -{ - return 0; -} +static inline void db8500_prcmu_system_reset(u16 reset_code) {} -static inline int prcmu_disable_spi2(void) +static inline int db8500_prcmu_set_power_state(u8 state, bool keep_ulp_clk, + bool keep_ap_pll) { return 0; } -static inline void db8500_prcmu_system_reset(u16 reset_code) {} - -static inline int db8500_prcmu_set_power_state(u8 state, bool keep_ulp_clk, - bool keep_ap_pll) +static inline u8 db8500_prcmu_get_power_state_result(void) { return 0; } @@ -729,27 +686,27 @@ static inline u16 db8500_prcmu_get_reset_code(void) return 0; } -static inline int prcmu_config_a9wdog(u8 num, bool sleep_auto_off) +static inline int db8500_prcmu_config_a9wdog(u8 num, bool sleep_auto_off) { return 0; } -static inline int prcmu_enable_a9wdog(u8 id) +static inline int db8500_prcmu_enable_a9wdog(u8 id) { return 0; } -static inline int prcmu_disable_a9wdog(u8 id) +static inline int db8500_prcmu_disable_a9wdog(u8 id) { return 0; } -static inline int prcmu_kick_a9wdog(u8 id) +static inline int db8500_prcmu_kick_a9wdog(u8 id) { return 0; } -static inline int prcmu_load_a9wdog(u8 id, u32 val) +static inline int db8500_prcmu_load_a9wdog(u8 id, u32 val) { return 0; } @@ -769,6 +726,16 @@ static inline int db8500_prcmu_get_arm_opp(void) return 0; } +static inline u32 db8500_prcmu_read(unsigned int reg) +{ + return 0; +} + +static inline void db8500_prcmu_write(unsigned int reg, u32 value) {} + +static inline void db8500_prcmu_write_masked(unsigned int reg, u32 mask, + u32 value) {} + #endif /* !CONFIG_MFD_DB8500_PRCMU */ #endif /* __MFD_DB8500_PRCMU_H */ |