summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-06-18cg2900: Fix for softirq warning during bootingcg2900mjain001
spin_lock_bh called in interrupt mode, which is incorrect. Changed from spin_lock_bh/spin_inlock_bh to spin_lock_irqsave/spin_lock_irqrestore. Signed-off-by: mjain001 <mridul.jain@stericsson.com>
2012-05-22cg2900: bluetooth: Porting onto new 3.4 APIPhilippe Langlais
Now, there is a FIXME, due to destruct() ops removing. Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org>
2012-05-22cg2900: Include missing <linux/mutex.h> for 3.4Philippe Langlais
Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org>
2012-05-22cg2900: Change the PMU_EN gpio for snowballRobert MARKLUND
Snowball have the GPIO_EN on GPIO161 diffrent from u8500. Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
2012-05-22cg2900: ux500: Add U8520 machineBengt Jonsson
ST-Ericsson ID: 371953 Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com>
2012-05-22cg2900: Fix FM audio issues on cg2905/10Nitin Dhingra
Fixed set control settings for cg2905/10 which solves audio issues on FM. ST-Ericsson Linux next: NA ST-Ericsson ID: 414955 ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I921996f00ac1525a9f7a022213d57f87da412e4f Signed-off-by: Nitin Dhingra <nitin.dhingra@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/51100 Reviewed-by: QATOOLS Reviewed-by: Anupam ROY <anupam.roy@stericsson.com> Tested-by: Anupam ROY <anupam.roy@stericsson.com> Reviewed-by: QABUILD
2012-05-22cg2900: Add support for 9540Yann Gautier
ST-Ericsson Linux next: NA ST-Ericsson ID: 398896 ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I9494dad4b3127bb253532f86074e995ee45d2376 Signed-off-by: Yann Gautier <yann.gautier@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/44915 Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
2012-05-22cg2900: firmware download at 115kbps CG2910/05Nitin Dhingra
There is a bug in CG2910/05 PG1, due to which ARMSS firmware patch has to be downloaded at 115kbps. CQ Ticket for this hardware bug is CM0033243 ST-Ericsson Linux next: Not Tested, ER 373024 ST-Ericsson ID: 373024 ST-Ericsson FOSS-OUT ID: STETL-FOSS-OUT-10019 Change-Id: I4965618f5a1b0ab40f683a5f720a99790d80c3da Depends-On: 09e279e3710a122eccd1ebd4929f79c244c78c9e Signed-off-by: Nitin Dhingra <nitin.dhingra@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/43862 Reviewed-by: QATOOLS
2012-05-22cg2900: Wrong sequence number from CG2910/05Nitin Dhingra
After hardware reset, firmware patch download fails with error 0xF1 (Wrong Seq Number). Resending the first patch solves the problem. Clearquest ticket for this hardware bug is: CM0032866 ST-Ericsson Linux next: Not Tested, ER 373024 ST-Ericsson ID: 373024 ST-Ericsson FOSS-OUT ID: STETL-FOSS-OUT-10019 Change-Id: I05a193c52efa9fd080691f22722c0660d509f401 Depends-On: 09e279e3710a122eccd1ebd4929f79c244c78c9e Signed-off-by: Nitin Dhingra <nitin.dhingra@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/43860 Reviewed-by: QATOOLS Reviewed-by: QABUILD Reviewed-by: Hemant GUPTA <hemant.gupta@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
2012-05-22cg2900: Support new connectivity chipsHemant Gupta
This patch adds support for new connectivity combo chips. Support is added for CG2905 and CG2910 chips firmware downloading. CG2910 supports NFC, therefore a new HCI H4 channel is added. ST-Ericsson Linux next: Not Tested, ER 373024 ST-Ericsson ID: 373024 ST-Ericsson FOSS-OUT ID: STETL-FOSS-OUT-10019 Change-Id: I18158e26e6e651c0ba7e6b98b872a20d5fcaa423 Signed-off-by: Hemant Gupta <hemant.gupta@stericsson.com> Signed-off-by: Nitin Dhingra <nitin.dhingra@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33716 Reviewed-by: QATOOLS
2012-05-22CG2900: changing sleep timersNitin Dhingra
Reducing the sleep timer value from 10 sec to 150ms, to put CG29XX chip to sleep. and after 50ms checking CG29XX has gone to sleep then release the wakelocks for system to go in sleep mode. This will decrease the power consumption greatly. ST-Ericsson Linux next: NA ST-Ericsson ID: 375669 ST-Ericsson FOSS-OUT ID: trivial Change-Id: I48b8b2c3962747743fc8fef5288bcd05921be8f6 Signed-off-by: Nitin Dhingra <nitin.dhingra@stericsson.com> Depends-On: I0618c5f7e507b540907546d10fd217b046484263 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/43737 Reviewed-by: Hemant GUPTA <hemant.gupta@stericsson.com> Reviewed-by: QATOOLS
2012-05-22CG2900: Fix timings for CG29XX during breakNitin Dhingra
In Reference to CG29x0 low power mode control document, there are some fixes required in CG2900 protocol driver for break conditions. 1)Pre-break - 900usec - This is the minimal time before Host sending a break after it completes sending data on Tx_Host line. 2)in-break - 5msec - This is the minimal time that Host should maintain the break. 3)post-break - 200usec - This is the minimal time before Host starting sending data on Tx_Host line after it exits break. ST-Ericsson Linux next: Not Tested, ER 410756 ST-Ericsson ID: 410756 ST-Ericsson FOSS-OUT ID: trivial Signed-off-by: Nitin Dhingra <nitin.dhingra@stericsson.com> Change-Id: I0618c5f7e507b540907546d10fd217b046484263 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/45521 Reviewed-by: QATOOLS Reviewed-by: Nitin DHINGRA <nitin.dhingra@stericsson.com> Tested-by: Nitin DHINGRA <nitin.dhingra@stericsson.com>
2012-05-22cg2900: Code optimizations for CG2900 init timenitin.dhingra
Some general code optimizations during intialization done. Also we are releasing clock user like WLAN earlier as READ SELF TEST is not required for WLAN functionality. All these optimizations are done to reduce CG2900 init time which will also impact WLAN start-up time. Also ESD Clamp workaround has been removed from the code completely. This is not required anymore. ST-Ericsson Linux next: NA ST-Ericsson ID: 370603 ST-Ericsson FOSS-OUT ID: trivial Change-Id: I7895e21193d20d24ff65a51ff3591108d575399c Signed-off-by: Nitin Dhingra <nitin.dhingra@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/37998 Reviewed-by: QATOOLS
2012-05-22cg2900: Changes for porting on 3.3Philippe Langlais
Signed-off-by: Philippe Langlais <philippe.langlais@stericsson.com>
2012-05-22cg2900: [U9500] Correct the GPIO configuration for WLANPhilippe Langlais
There are two parts in this correction. Firstly, as there is much in common between a U9500 platform and a U8500 one, all the tests performed to identify a U9500 platform shall be done before the ones related to U8500. Otherwise, the platform will be considered as a U8500 one and the GPIOs will be badly configured. Secondly, the mapping of WLAN_IRQ has to be changed. On U8500, WLAN_IRQ is mapped onto GPIO04. On U9500, it is GPIO144 that shall be used. ST-Ericsson ID: 368270 ST-Ericsson Linux next: NA ST-Ericsson FOSS-OUT ID: Trivial Signed-off-by: Rejane DURAND <rejane.durand@stericsson.com>
2012-05-22cg2900: Fix for race conditionLukasz Rymanowski
Fix for race condition which leads to double kfree_skb. ST-Ericsson Linux next: 365852 ST-Ericsson ID: 365852 ST-Ericsson FOSS-OUT ID: STETL-FOSS-OUT-10019 Change-Id: Ia951a283d9e3774b29a51280b0536838926c99f9 Signed-off-by: Lukasz Rymanowski <lukasz.rymanowski@tieto.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/34863 Reviewed-by: Lukasz RYMANOWSKI <lukasz.rymanowski@stericsson.com> Tested-by: Lukasz RYMANOWSKI <lukasz.rymanowski@stericsson.com> Reviewed-by: Hemant GUPTA <hemant.gupta@stericsson.com> Reviewed-by: SZYMON JANC <szymon.janc@tieto.com> Reviewed-by: Nitin DHINGRA <nitin.dhingra@stericsson.com> Reviewed-by: Ulrik LAUREN <ulrik.lauren@stericsson.com>
2012-05-22cg2900: updates for 3.2Philippe Langlais
Update for headers file (linux/module.h + linux/pm_qos.h) Replace CONFIG_MFD_SUPPORT by HAS_IOMEM + select MFD_CORE Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org>
2012-05-22staging: Add ST-Ericsson CG2900 driver compilationPhilippe Langlais
Signed-off-by: Philippe Langlais <philippe.langlais@stericsson.com>
2012-05-22cg2900: Add support for 3.25 MbpsLukasz Rymanowski
With this patch it is possible to set baud rate 3.25 Mbps on CG2900 UART. ST-Ericsson ID: 364789 ST-Ericsson FOSS-OUT ID: Trivial ST-Ericsson Linux next: Not tested, 364789 Signed-off-by: Lukasz Rymanowski <lukasz.rymanowski@tieto.com> Change-Id: If54af597b949038e9ef4c05d80c9235666e127a4 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32689 Reviewed-by: Lukasz RYMANOWSKI <lukasz.rymanowski@stericsson.com> Tested-by: Lukasz RYMANOWSKI <lukasz.rymanowski@stericsson.com> Reviewed-by: Par-Gunnar HJALMDAHL <par-gunnar.p.hjalmdahl@stericsson.com>
2012-05-22cg2900: Fix Memory Leak during Driver Init.Hemant Gupta
This patch fixes memory leak during driver initialization because pmu gpio was never freed in case of failure in snowball initialization. ST-Ericsson ID: 365769 ST-Ericcson FOSS-OUT-ID: Trivial ST-Ericsson Linux next: 365769 Change-Id: Ic6ed3e172ca46ccf0da443272845de984f0f5706 Signed-off-by: Hemant Gupta <hemant.gupta@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33254 Reviewed-by: QABUILD Reviewed-by: Par-Gunnar HJALMDAHL <par-gunnar.p.hjalmdahl@stericsson.com>
2012-05-22cg2900: Use Dynamic Machine configuration.Hemant Gupta
This patch adds dynamic selection of machine configuration and merges the board and device configuration files. ST-Ericsson ID: 365671 ST-Ericcson FOSS-OUT-ID: Trivial ST-Ericsson Linux next: 365671 Change-Id: I58601115bb8234ab203ac8cd37711563eceb4d17 Signed-off-by: Hemant Gupta <hemant.gupta@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33130 Reviewed-by: QABUILD Reviewed-by: Par-Gunnar HJALMDAHL <par-gunnar.p.hjalmdahl@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
2012-05-22cg2900: Use PM QoS for CG2900 UARTPar-Gunnar Hjalmdahl
This patch adds usage of PM QoS in the CG2900 UART driver. This is to assure that data throughput is not lowered due to CPU going to sleep too often during data transfer. ST-Ericsson ID: 361013 ST-Ericcson FOSS-OUT-ID: Trivial ST-Ericsson Linux next: 361013 Change-Id: Ib79dee9bd95817d459acd477715d95d7aade06a7 Signed-off-by: Par-Gunnar Hjalmdahl <par-gunnar.p.hjalmdahl@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33109 Reviewed-by: Lukasz RYMANOWSKI <lukasz.rymanowski@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Reviewed-by: Ulrik LAUREN <ulrik.lauren@stericsson.com> Tested-by: Ulrik LAUREN <ulrik.lauren@stericsson.com> Reviewed-by: Hemant GUPTA <hemant.gupta@stericsson.com>
2012-05-22mfd/cg2900: Error opening HCI Raw ChannelHemant Gupta
This patch fixes the corner case issue in driver, due to which if the port is closed while data is being read, the driver state is not correct next time the port is re-opened. ST-Ericsson Linux next: Not tested, ER356425 ST-Ericsson ID: 356425 ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I82090c25ce7dd3aea07bacd96856d62361bcd741 Signed-off-by: Hemant Gupta <hemant.gupta@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32208 Reviewed-by: Henrik POSSUNG <henrik.possung@stericsson.com> Reviewed-by: Par-Gunnar HJALMDAHL <par-gunnar.p.hjalmdahl@stericsson.com>
2012-05-22mfd/cg2900: Support HCI Raw Channel.Hemant Gupta
Add support for HCI Raw channel so that CG2900 can be accessed directly from user space. ST-Ericsson Linux next: Not tested, ER351170 ST-Ericsson ID: 351170 ST-Ericsson FOSS-OUT ID: Trivial Change-Id: If8a2455be32f0eb99f7c0bc7a5cf0e09270fa6af Signed-off-by: Hemant Gupta <hemant.gupta@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32206 Reviewed-by: Henrik POSSUNG <henrik.possung@stericsson.com> Reviewed-by: Par-Gunnar HJALMDAHL <par-gunnar.p.hjalmdahl@stericsson.com>
2012-05-22cg2900: Fix after 3.1 rebasePhilippe Langlais
Signed-off-by: Philippe Langlais <philippe.langlais@stericsson.com>
2012-05-22cg2900: Register CG2900 as clock source for wlanHemant Gupta
This patch registers CG2900 Driver as clock source which can be used by CW1200 Driver for enabling, disabling clock supplied by CG2900. ST-Ericsson Linux next: 361990 ST-Ericsson ID: 361990 ST-Ericsson FOSS-OUT ID: STETL-FOSS-OUT-10019 Change-Id: Ia86e439c4dca962a5e911a73a3d0cee7d3289193 Signed-off-by: Hemant Gupta <hemant.gupta@stericsson.com> Signed-off-by: Robert Marklund <robert.marklund@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/34067 Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com>
2012-05-22cg2900: Use correct platform_dataPar-Gunnar Hjalmdahl
This patch fixes a bug in the CG2900 driver where platform data structure was overwritten during probe. ST-Ericsson ID: 364913 ST-Ericcson FOSS-OUT-ID: Trivial ST-Ericsson Linux next: 364913 Change-Id: Id6e6918814e01dbef0cd89eda0a034196a81454a Signed-off-by: Par-Gunnar Hjalmdahl <par-gunnar.p.hjalmdahl@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/34065 Tested-by: Robert MARKLUND <robert.marklund@stericsson.com> Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com>
2012-05-22cg2900: Fix merge problemsRobert Marklund
Remove dual setups so that we only run one Remove unused labels and freeing of gpios Change-Id: Ib8f21dcbec7bd8155a8c10448f515084143fab24 Signed-off-by: Robert Marklund <robert.marklund@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/34066 Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com>
2012-05-22cg2900: u5500: Make ux500 play nice at build timeRobert Marklund
Make the cg2900 build if we have both soc:s enabled. Change-Id: I302b0772128270f07a2b6ab114d151faa8680dd2 Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
2012-05-22cg2900: prcmu: fix path to header filePhilippe Langlais
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32448 Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Tested-by: Jonas ABERG <jonas.aberg@stericsson.com>
2012-05-22ux500: use updated gpio driverMian Yousaf Kaukab
AB8500 gpio driver is now exporting its gpios directly. Change-Id: Iea4e25f325246a1e690fd3c4fa67ba88157957ab Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32128 Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Tested-by: Jonas ABERG <jonas.aberg@stericsson.com>
2012-05-22cg2900: Add KernelDocPhilippe Langlais
This patch adds KernelDoc for the CG2900 driver. ST-Ericsson ID: 364042 ST-Ericcson FOSS-OUT-ID: Trivial ST-Ericsson Linux next: 364042 Change-Id: Idccbf196bcf4a9c5f280e3745ce3e72c499dee80 Signed-off-by: Par-Gunnar Hjalmdahl <par-gunnar.p.hjalmdahl@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32035 Reviewed-by: Hemant GUPTA <hemant.gupta@stericsson.com>
2012-05-22u9500: cg2900: GPIO conflicts with external modemPhilippe Langlais
This patch content should have gone with the below commit 2057772c5d0b1a18198c91085d9e828cdb23d23b
2012-05-22cg2900: Set WLAN_PMU_EN for startupPar-Gunnar Hjalmdahl
Re apply the patch as some part of the patch content was lost becuase of 42cf5133396cf34d8ec640e4dc8f36f81b028dc3 Change-Id: I99dd076f79f01eb67b3db5020707f9d8f53fb455 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/30792 Reviewed-by: Par-Gunnar HJALMDAHL <par-gunnar.p.hjalmdahl@stericsson.com> Reviewed-by: Virupax SADASHIVPETIMATH <virupax.sadashivpetimath@stericsson.com> Tested-by: Virupax SADASHIVPETIMATH <virupax.sadashivpetimath@stericsson.com>
2012-05-22cg2900: bluetooth support for 5500Grzegorz Sygieda
This patch enables cg2900 functionality in 5500 boards. All tests have been made on B5500 (big board BBM R1A) with new CG2900 hardware. NOTE: For proper work new B5500 FPGA firmware is needed (v536). Depends-On: I7820139cc44e347c5b113b1beb665c2489bf74c2 ST-Ericsson Linux next: NA ST-Ericsson ID: 281802 ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I3df0bc1e41e60ce6abf4be9cb18465073ba8d738 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/30348 Reviewed-by: Par-Gunnar HJALMDAHL <par-gunnar.p.hjalmdahl@stericsson.com> Reviewed-by: Virupax SADASHIVPETIMATH <virupax.sadashivpetimath@stericsson.com> Tested-by: Virupax SADASHIVPETIMATH <virupax.sadashivpetimath@stericsson.com>
2012-05-22Revert "cg2900: bluetooth support for 5500"Virupax Sadashivpetimath
This reverts commit 76d004cce0dbb6fddad256790e6ae574278b46e0. Conflicts: arch/arm/mach-ux500/board-u5500.c drivers/staging/cg2900/devices-cg2900-u8500.c drivers/staging/cg2900/devices-cg2900.h Change-Id: Ic480f348be5387d83a3e46280b73dd9bbb3ba43d Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/30347 Reviewed-by: Par-Gunnar HJALMDAHL <par-gunnar.p.hjalmdahl@stericsson.com>
2012-05-22u9500: GPIO conflicts with external modemChristophe Guibout
On 8500, GPIO226 is used to set WLAN_PMU_EN for startup. More details in CR 326583. On 9500, GPIO226 is reserved for HSIT_CAWAKE0, and WLAN_PMU_EN is mapped on AB_GPIO11. WLAN_IRQ has been moved from GPIO04 on 8500 to GPIO144 on 9500 because GPIO04 is used for UART1 RX. ST-Ericsson ID: 354110 ST-Ericsson FOSS-OUT ID: Trivial ST-Ericsson Linux next: NA Change-Id: Ia76f1a5a611a1929c12589a48c3e0774e891880a Signed-off-by: Christophe Guibout <christophe.guibout@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/30041 Reviewed-by: Virupax SADASHIVPETIMATH <virupax.sadashivpetimath@stericsson.com> Tested-by: Virupax SADASHIVPETIMATH <virupax.sadashivpetimath@stericsson.com>
2012-05-22cg2900: Set WLAN_PMU_EN for startupPar-Gunnar Hjalmdahl
This patch changes startup behavior of CG2900 so that WLAN_PMU_EN is controlled separately. ST-Ericsson Linux next: Not tested, ER 326583 ST-Ericsson ID: 326583 ST-Ericsson FOSS-OUT ID: Trivial Change-Id: Iac4aac30835b93c16ceaaf2aa0e601b293cc0cbb Signed-off-by: Par-Gunnar Hjalmdahl <par-gunnar.p.hjalmdahl@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/23839 Reviewed-by: Lukasz RYMANOWSKI <lukasz.rymanowski@stericsson.com> Reviewed-by: QATEST Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/30040 Reviewed-by: Virupax SADASHIVPETIMATH <virupax.sadashivpetimath@stericsson.com> Tested-by: Virupax SADASHIVPETIMATH <virupax.sadashivpetimath@stericsson.com>
2012-05-22cg2900: Fix checkpatch issuesPar-Gunnar Hjalmdahl
This patch corrects checkpatch issues found during mainlining work of the CG2900 driver to the Linux Kernel. ST-Ericsson Linux next: Not tested, ER 282957 ST-Ericsson ID: 333469 ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I62eb48ecdeddcc064279466195df24afdc87abbc Signed-off-by: Par-Gunnar Hjalmdahl <par-gunnar.p.hjalmdahl@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/19743 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/30039 Reviewed-by: Virupax SADASHIVPETIMATH <virupax.sadashivpetimath@stericsson.com> Tested-by: Virupax SADASHIVPETIMATH <virupax.sadashivpetimath@stericsson.com>
2012-05-22cg2900: Fix for not working BT on hrefp V71Lukasz Rymanowski
GPIO 170 is no longer used by BT. Remove it from cg2900_uart_resources. ST-Ericsson Linux next: Not tested, ER282957 ST-Ericsson ID: 328481 ST-Ericsson FOSS-OUT ID: Trivial Change-Id: Icec5ecc284806553bac2bd41bf555b70d1abadb8 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/30037 Reviewed-by: Virupax SADASHIVPETIMATH <virupax.sadashivpetimath@stericsson.com> Tested-by: Virupax SADASHIVPETIMATH <virupax.sadashivpetimath@stericsson.com>
2012-05-22cg2900: bluetooth support for 5500Philippe Langlais
This patch enables cg2900 functionality in 5500 boards. All tests have been made on B5500 (big board BBM R1A) with new CG2900 hardware. NOTE: For proper work new B5500 FPGA firmware is needed (v536). Depends-On: I7820139cc44e347c5b113b1beb665c2489bf74c2 ST-Ericsson Linux next: NA ST-Ericsson ID: 281802 ST-Ericsson FOSS-OUT ID: Trivial Change-Id: Iebdacf94fd125c7ead843ecee6927d95f8e32738 Signed-off-by: Grzegorz Sygieda <grzegorz.sygieda@tieto.com> Tested-by: Grzegorz Sygieda <grzegorz.sygieda@tieto.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/22941 Reviewed-by: Grzegorz SYGIEDA <Grzegorz.Sygieda@tieto.com> Tested-by: Grzegorz SYGIEDA <Grzegorz.Sygieda@tieto.com> Reviewed-by: Par-Gunnar HJALMDAHL <par-gunnar.p.hjalmdahl@stericsson.com> Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/30035 Reviewed-by: Virupax SADASHIVPETIMATH <virupax.sadashivpetimath@stericsson.com> Tested-by: Virupax SADASHIVPETIMATH <virupax.sadashivpetimath@stericsson.com>
2012-05-22Adding a delay to CG2900 enable to make the chip start up correctlyUlrik LAUREN
An existing fix for resolving a bug in CG2900 has been reverted, the fix for ER319589 has been removed since it shall not be necessary for chip enabling. Instead, a delay of 100 ms has been added during chip enabling. ST-Ericsson ID: 337664 ST-Ericsson FOSS-OUT ID: Trivial Change-Id: Ib59cb7a70972985f41efae2e06653217b3b1abd5 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/23086 Reviewed-by: QATEST Reviewed-by: Andreas ARESKOUG <andreas.areskoug@stericsson.com> Reviewed-by: Tomasz HLIWIAK <tomasz.hliwiak@tieto.com> Tested-by: Tomasz HLIWIAK <tomasz.hliwiak@tieto.com> Reviewed-by: Ulrik LAUREN <ulrik.lauren@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/30034 Reviewed-by: Virupax SADASHIVPETIMATH <virupax.sadashivpetimath@stericsson.com> Tested-by: Virupax SADASHIVPETIMATH <virupax.sadashivpetimath@stericsson.com>
2012-05-22cg2900: Delay creation of MFD devicesPar-Gunnar Hjalmdahl
This patch changes behavior when a chip transport is connected, i.e. normally during startup of system. It became obvious that this change was needed when commit ab81cbf99c881ca2b9a83682a8722fc84b2483d2 was introduced. We now wait until startup is finished, i.e. after shutting down the chip, before we register the MFD devices. ST-Ericsson ID: 352334 ST-Ericcson FOSS-OUT-ID: Trivial ST-Ericsson Linux next: 274079 Signed-off-by: Par-Gunnar Hjalmdahl <par-gunnar.p.hjalmdahl@stericsson.com> Change-Id: I48983ac4363600daf99a8edd2d3bfb9093ef94d4 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/29938 Reviewed-by: Par-Gunnar HJALMDAHL <par-gunnar.p.hjalmdahl@stericsson.com> Tested-by: Par-Gunnar HJALMDAHL <par-gunnar.p.hjalmdahl@stericsson.com>
2012-05-22cg2900: Add pdata_size to mfd_cellPar-Gunnar Hjalmdahl
This patch adds the pdata_size parameter to the MFD cells so that the correct amount of platform data is copied when creating MFD devices. ST-Ericsson ID: 352334 ST-Ericcson FOSS-OUT-ID: Trivial ST-Ericsson Linux next: 274079 Signed-off-by: Par-Gunnar Hjalmdahl <par-gunnar.p.hjalmdahl@stericsson.com> Change-Id: I10f3146eac89d4e238d80829f8c209aaad909bd1 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/29818 Reviewed-by: Par-Gunnar HJALMDAHL <par-gunnar.p.hjalmdahl@stericsson.com> Tested-by: Par-Gunnar HJALMDAHL <par-gunnar.p.hjalmdahl@stericsson.com>
2012-05-22cg2900: Do not send RX data to wrong userPar-Gunnar Hjalmdahl
This patch corrects an issue where received data was sent to the wrong user depending on which user first opened the channel. ST-Ericsson Linux next: Not tested, ER 282957 ST-Ericsson ID: 333690 ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I14c0bb64e2bd2c0d175da0407af3da179920d015 Signed-off-by: Par-Gunnar Hjalmdahl <par-gunnar.p.hjalmdahl@stericsson.com> Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/29927
2012-05-22cg2900: Use correct struct for SCO start streamPar-Gunnar Hjalmdahl
This patch corrects an issue where wrong structure was used when starting a SCO stream. ST-Ericsson Linux next: Not tested, ER 282957 ST-Ericsson ID: 333792 ST-Ericsson FOSS-OUT ID: Trivial Change-Id: Ia36809fa623d4957f962410a3416beca2f657b9f Signed-off-by: Par-Gunnar Hjalmdahl <par-gunnar.p.hjalmdahl@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/19948 Reviewed-by: Roger NILSSON1 <roger.xr.nilsson@stericsson.com> Reviewed-by: Henrik POSSUNG <henrik.possung@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/29800 Reviewed-by: Virupax SADASHIVPETIMATH <virupax.sadashivpetimath@stericsson.com> Tested-by: Virupax SADASHIVPETIMATH <virupax.sadashivpetimath@stericsson.com>
2012-05-22mfd/cg2900: Fix for memory leak when using logger.Lukasz Rymanowski
Remove memory leak when sending skb to logger. ST-Ericsson Linux next: Not tested, ER282957 ST-Ericsson ID: 329071 ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I0880bc71b4fa654601d96dfdddeff17e64155e55 Signed-off-by: Lukasz Rymanowski <lukasz.rymanowski@tieto.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/18452 Reviewed-by: Lukasz RYMANOWSKI <lukasz.rymanowski@stericsson.com> Tested-by: Lukasz RYMANOWSKI <lukasz.rymanowski@stericsson.com> Reviewed-by: Dariusz SZYMCZAK <dariusz.xd.szymczak@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Reviewed-by: Henrik POSSUNG <henrik.possung@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/29798 Reviewed-by: Par-Gunnar HJALMDAHL <par-gunnar.p.hjalmdahl@stericsson.com> Reviewed-by: Virupax SADASHIVPETIMATH <virupax.sadashivpetimath@stericsson.com> Tested-by: Virupax SADASHIVPETIMATH <virupax.sadashivpetimath@stericsson.com>
2012-05-22cg2900: Disable chip when init failedAndrzej Kaczmarek
Adds set_chip_power FALSE call to disable chip when it was not possible to read out revision from the chip (means that initialization failed). ST-Ericsson Linux next: Not tested, ER 351382 ST-Ericsson ID: 351382 ST-Ericsson FOSS-OUT ID: Trivial Change-Id: Ia3ace0b964095d679cb9c3885de2deaa1aa195a3 Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@tieto.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/28057 Reviewed-by: Par-Gunnar HJALMDAHL <par-gunnar.p.hjalmdahl@stericsson.com> Reviewed-by: Lukasz RYMANOWSKI <lukasz.rymanowski@stericsson.com> Reviewed-by: QATOOLS Reviewed-by: QATEST Tested-by: Lukasz RYMANOWSKI <lukasz.rymanowski@stericsson.com> Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/29797 Tested-by: Virupax SADASHIVPETIMATH <virupax.sadashivpetimath@stericsson.com> Reviewed-by: Virupax SADASHIVPETIMATH <virupax.sadashivpetimath@stericsson.com>
2012-05-22cg2900: Fix crash when transport is closedPar-Gunnar Hjalmdahl
This patch fixes crashes caused by transport being removed while users of the CG2900 driver still exist. ST-Ericsson Linux next: Not tested, ER 336652 ST-Ericsson ID: 336652 ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I6318ce1086097a4fa63a1793b6795b01ea939715 Signed-off-by: Par-Gunnar Hjalmdahl <par-gunnar.p.hjalmdahl@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/21781 Reviewed-by: QATEST Reviewed-by: Lukasz RYMANOWSKI <lukasz.rymanowski@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/29795 Reviewed-by: Virupax SADASHIVPETIMATH <virupax.sadashivpetimath@stericsson.com> Tested-by: Virupax SADASHIVPETIMATH <virupax.sadashivpetimath@stericsson.com>
2012-05-22staging: cg2900: Fix for gpio header moveRobert Marklund
Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-05-03 06:37:19 +0000