summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-03-03OMAP3 and 4 I2C use cpu type consistently for new register availabilitylinaro-linux-2.6.38-upstream-04Mar2011Andy Green
The driver makes the choice about which register layout to use based on cpu, however it then tries to use the probed peripheral unit version register to decide whether to access registers that only exist in the 4430 unit. Unfortunately, the unit with the smaller register map on the OMAP3530 has the same peripheral unit version number, leading the OMAP3530 to dereference the register map beyond the bounds of its array, and then to access a 'random' register offset taken from whatever happens to be sitting beyond the register map array, as reported here https://bugs.launchpad.net/linux-linaro/+bug/645324 This patch makes both the choice of register map and the decision to use a register only present in the larger map both do so based on cpu type, which correctly reflects register availability. Cc: patches@linaro.org Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andy Green <andy.green@linaro.org> Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-03-03OMAP3 and 4 i2c mark extended reg enums as extended onlyAndy Green
The OMAP I2C driver dynamically chooses between two register sets of differing sizes depending on the cpu type it finds itself on. It has been observed that the existing code references non-existing registers on OMAP3530, because while it correctly chose the smaller register layout based on cpu type, the code uses the probed register ID to decide if to execute code referencing an extra register, and both register layout devices on OMAP3530 and OMAP4430 report the same probed ID of 0x40. This patch changes the extended register name to make it clearer they only exist in OMAP4 context Cc: patches@linaro.org Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andy Green <andy.green@linaro.org> Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-03-03OMAP3 I2C document why cpu type and not peripheral unit ID used to probeAndy Green
Describe why we can't simply probe the peripheral unit ID to make the decision about what register map to use Cc: patches@linaro.org Signed-off-by: Andy Green <andy.green@linaro.org> Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-03-03OMAP3 and 4 hwmod I2C units only allow 16 bit accessAndy Green
Peter Maydell noticed when running under QEMU he was getting errors reporting 32-bit access to I2C peripheral unit registers that are documented to be 8 or 16-bit only[1][2] The I2C driver is blameless as it wraps its accesses in a function using __raw_writew and __raw_readw, it turned out it is the hwmod stuff. However the hwmod code already has a flag to force a perhipheral unit to only be accessed using 16-bit operations. This patch applies the 16-bit only flag to the OMAP3xxx and OMAP44xx hwmod structs. [1] OMAP4430 Technical reference manual section 23.1.6.2 [2] OMAP3530 Techincal reference manual section 18.6 Cc: patches@linaro.org Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andy Green <andy.green@linaro.org> Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-03-02ARM: compressed/head.S: make LDFLAGS_vmlinux into a recursively expanded ↵Nicolas Pitre
variable The simply expanded variable may be evaluated before the target file for the stat command is up to date or even exists. Switching to a recursively expanded variable move the execution of the stat command to the location where the LDFLAGS_vmlinux variable is used fixing the dependency issue. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-03-01Merge commit 'v2.6.38-rc7' into linaro-2.6.38Nicolas Pitre
2011-03-01mach-ux500: activate USB in the U8500 defconfigLinus Walleij
Activate the new USB stuff so we atleast get some compile coverage for this stuff. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-03-01mach-ux500: activate fix for errata 753970Linus Walleij
This applies errata fix 753970 for all ux500 platforms. All current ASICs suffer from this. If the problem is resolved in later ASICs, the errata selection can be pushed down to other Kconfig options. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-03-01omap4: dvfs: fix link errorNicolas Pitre
LD .tmp_vmlinux1 arch/arm/mach-omap2/built-in.o: In function `omap_target': arch/arm/mach-omap2/omap2plus-cpufreq.c:118:undefined reference to `omap_device_scale' arch/arm/plat-omap/built-in.o: In function `omap_device_build_ss': arch/arm/plat-omap/omap_device.c:490:undefined reference to `omap_dvfs_register_device' make[2]: *** [.tmp_vmlinux1] Error 1 eported-by: Bryan Wu <bryan.wu@canonical.com> Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-03-01Linux 2.6.38-rc7v2.6.38-rc7Linus Torvalds
2011-03-01Revert "TPM: Long default timeout fix"Linus Torvalds
This reverts commit c4ff4b829ef9e6353c0b133b7adb564a68054979. Ted Ts'o reports: "TPM is working for me so I can log into employer's network in 2.6.37. It broke when I tried 2.6.38-rc6, with the following relevant lines from my dmesg: [ 11.081627] tpm_tis 00:0b: 1.2 TPM (device-id 0x0, rev-id 78) [ 25.734114] tpm_tis 00:0b: Operation Timed out [ 78.040949] tpm_tis 00:0b: Operation Timed out This caused me to get suspicious, especially since the _other_ TPM commit in 2.6.38 had already been reverted, so I tried reverting commit c4ff4b829e: "TPM: Long default timeout fix". With this commit reverted, my TPM on my Lenovo T410 is once again working." Requested-and-tested-by: Theodore Ts'o <tytso@mit.edu> Acked-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-28Merge branch 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging: hwmon: (adt7411) add MODULE_DEVICE_TABLE hwmon: (ad7414) add MODULE_DEVICE_TABLE
2011-02-28fs/block_dev.c: fix new kernel-doc warningRandy Dunlap
Fix new kernel-doc warning in fs/block_dev.c: Warning(fs/block_dev.c:937): No description found for parameter 'kill_dirty' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-28ACPI: Fix build for CONFIG_NET unsetRafael J. Wysocki
Several ACPI drivers fail to build if CONFIG_NET is unset, because they refer to things depending on CONFIG_THERMAL that in turn depends on CONFIG_NET. However, CONFIG_THERMAL doesn't really need to depend on CONFIG_NET, because the only part of it requiring CONFIG_NET is the netlink interface in thermal_sys.c. Put the netlink interface in thermal_sys.c under #ifdef CONFIG_NET and remove the dependency of CONFIG_THERMAL on CONFIG_NET from drivers/thermal/Kconfig. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Len Brown <lenb@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Luming Yu <luming.yu@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-28Merge branch 'drm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm: fix unsigned vs signed comparison issue in modeset ctl ioctl. drm/nv50-nvc0: make sure vma is definitely unmapped when destroying bo
2011-02-28Merge branch 'omap-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: omap4: prcm: Fix the CPUx clockdomain offsets OMAP2+: clocksource: fix crash on boot when !CONFIG_OMAP_32K_TIMER OMAP2/3: clock: fix fint calculation for DPLL_FREQSEL OMAP2+: mailbox: fix lookups for multiple mailboxes OMAP2420: mailbox: fix IVA vs DSP IRQ numbering mach-omap2: smartreflex: world-writable debugfs voltage files mach-omap2: pm: world-writable debugfs timer files mach-omap2: mux: world-writable debugfs files
2011-02-28Merge branches 'perf-fixes-for-linus', 'x86-fixes-for-linus' and ↵Linus Torvalds
'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf timechart: Fix max number of cpus perf timechart: Fix black idle boxes in the title perf hists: Print number of samples, not the period sum * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Use u32 instead of long to set reset vector back to 0 * 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: clockevents: Prevent oneshot mode when broadcast device is periodic
2011-02-28Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: fix truncate after open fuse: fix hang of single threaded fuseblk filesystem
2011-02-28Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2 * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: ocfs2: Check heartbeat mode for kernel stacks only Ocfs2/refcounttree: Fix a bug for refcounttree to writeback clusters in a right number. ocfs2: Fix estimate of necessary credits for mkdir
2011-02-28Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: eukrea-tlv320: fix platform_name ASoC: correct pxa AC97 DAI names ALSA: hda - Add support for new IDT 92HD98 and 92HD99 codecs ALSA: HDA: Add ideapad quirk for two Dell machines ALSA: HDA: Add a new Conexant codec 506e (20590) ALSA: usb-audio: fix oops due to cleanup race when disconnecting ASoC: Hook wm_hubs micbiases up to CLK_SYS ASoC: Correct definition of WM8903_VMID_RES_5K ASoC: Fix WM8958 default microphone detection argument ordering ALSA: HDA: Fix mic initialization in VIA auto parser ALSA: fix one memory leak in sound jack
2011-02-28mm: <asm-generic/pgtable.h> must include <linux/mm_types.h>Ben Hutchings
Commit e2cda3226481 ("thp: add pmd mangling generic functions") replaced some macros in <asm-generic/pgtable.h> with inline functions. If the functions are to be defined (not all architectures need them) then struct vm_area_struct must be defined first. So include <linux/mm_types.h>. Fixes a build failure seen in Debian: CC [M] drivers/media/dvb/mantis/mantis_pci.o In file included from arch/arm/include/asm/pgtable.h:460, from drivers/media/dvb/mantis/mantis_pci.c:25: include/asm-generic/pgtable.h: In function 'ptep_test_and_clear_young': include/asm-generic/pgtable.h:29: error: dereferencing pointer to incomplete type Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-28Merge branch 'omap-fixes-for-linus' of ↵linaro-linux-2.6.38-upstream-01Mar2011Nicolas Pitre
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 into linaro-2.6.38
2011-02-28Merge branch 'omap4_mpu_dvfs' into linaro-2.6.38Nicolas Pitre
2011-02-28OMAP4: Fix CONFIG_NR_CPUS for OMAP4Santosh Shilimkar
Fix number of CPUs for OMAP4 Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-02-28OMAP4 PM: Add support for OMAP4 MPU DVFSVishwanath BS
This patchset adds support for OMAP4 MPU DVFS with following changes - add vdd information for omap4 - enable all relevant OPPs for MPU VDD - define and register get_rate and set_rate with DVFS layer Signed-off-by: Vishwanath BS <vishwanath.bs@ti.com> Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-02-28OMAP2PLUS: cpufreq DVFS changesVishwanath BS
This patch adds support for DVFS in cpufreq driver by replacing clock api with DVFS api. Signed-off-by: Vishwanath BS <vishwanath.bs@ti.com> Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-02-28omap2plus: cpufreq: Add SMP support to cater OMAP4430Santosh Shilimkar
On OMAP SMP configuartion, both processors share the voltage and clock. So both CPUs needs to be scaled together and hence needs software co-ordination. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Kevin Hilman <khilman@ti.com> cc: Vishwanath BS <vishwanath.bs@ti.com> Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-02-28omap: cpufreq: Split omap1 and omap2plus cpufreq drivers.Vishwanath BS
This patch is an attempt to cleanup the #ifdeferry in the omap cpufreq drivers. The split betwenn omap1 and omap2plus is logical because - omap1 doesn't support opp layer. - omap1 build is seperate from omap2plus. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Vishwanath BS <vishwanath.bs@ti.com> Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-02-28omap2plus: clock: Add an alias cpu_ck to be used in common cpufreq driverSantosh Shilimkar
Add an alias clock node for cpu clock control on all OMAP2PLUS devices. The intention is avoid cpu_is_xxxx() checks in the common cpufreq driver. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-02-28Revert "OMAP3: cpufreq driver changes for DVFS support"Vishwanath BS
This reverts commit de1c81cf2d50cba25e3ed399d3fe6c412781827f since there is another patch set for omap cpufreq changes at https://patchwork.kernel.org/patch/589081/ Signed-off-by: Vishwanath BS <vishwanath.bs@ti.com> Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-02-28Merge branch 'omap_cpuidle' into linaro-2.6.38Nicolas Pitre
2011-02-28OMAP36xx PM: Updated C state latencies for OMAP3630Vishwanath BS
This patch has changes to update the C state latencies for OMAP3630 and disables the useless C-States, keeping only the optimized ones with their corresponding measured latencies. Only 4 C-states are kept instead of 7 C-States: * C1 . MPU WFI clock gated + Core autogating * C3 . MPU CSWR + Core inactive * C5 . MPU CSWR + Core CSWR * C7 . MPU OFF + Core OFF Thanks to Nicole Chaloub<n-chalhoub@ti.com> and Vincent Bour <v-bour@ti.com> for their investigation. Tested on ZOOM3 board using latest pm branch. Signed-off-by: Vishwanath BS <vishwanath.bs@ti.com> Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-02-28OMAP3 PM: Update only enabled C statesVishwanath BS
Currently function omap3_cpuidle_update_states updates valid flag of all the C states which includes the one which are disabled at init. So it's not really possible to selectively disable some of the C states using valid flag. This is fixed now by adding another flag called enabled which will be initialized at omap_init_power_states. So update_states will operated only on enabled C states. Signed-off-by: Vishwanath BS <vishwanath.bs@ti.com> Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-02-28OMAP3 PM: Deny clock gating only for safe stateVishwanath BS
Currently clock gating for MPU and core are denied whenever C1 state is selected. It should be denied only when safe state is selected. Signed-off-by: Vishwanath BS <vishwanath.bs@ti.com> Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-02-28Merge commit 'd239b1d' (misc branch) into linaro-2.6.38Nicolas Pitre
2011-02-28ARM: Thumb-2: Work around buggy Thumb-2 short branch relocations in gasDave Martin
Various binutils versions can resolve Thumb-2 branches to locally-defined, preemptible global symbols as short-range "b.n" branch instructions. This is a problem, because there's no guarantee the final destination of the symbol, or any candidate locations for a trampoline, are within range of the branch. For this reason, the kernel does not support fixing up the R_ARM_THM_JUMP11 (102) relocation in modules at all, and it makes little sense to add support. The symptom is that the kernel fails with an "unsupported relocation" error when loading some modules. Until fixed tools are available, passing -fno-optimize-sibling-calls to gcc should prevent gcc generating code which hits this problem, at the cost of a bit of extra runtime stack usage in some cases. The problem is described in more detail at: https://bugs.launchpad.net/binutils-linaro/+bug/725126 Only Thumb-2 kernels are affected. This patch adds a new CONFIG_THUMB2_AVOID_R_ARM_THM_JUMP11 config option which adds -fno-optimize-sibling-calls to CFLAGS_MODULE when building a Thumb-2 kernel. Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-02-28Merge remote-tracking branch 'rmk/fixes' into linaro-2.6.38Nicolas Pitre
2011-02-28x86: Use u32 instead of long to set reset vector back to 0Don Zickus
A customer of ours, complained that when setting the reset vector back to 0, it trashed other data and hung their box. They noticed when only 4 bytes were set to 0 instead of 8, everything worked correctly. Mathew pointed out: | | We're supposed to be resetting trampoline_phys_low and | trampoline_phys_high here, which are two 16-bit values. | Writing 64 bits is definitely going to overwrite space | that we're not supposed to be touching. | So limit the area modified to u32. Signed-off-by: Don Zickus <dzickus@redhat.com> Acked-by: Matthew Garrett <mjg@redhat.com> Cc: <stable@kernel.org> LKML-Reference: <1297139100-424-1-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-28perf timechart: Fix max number of cpusThomas Renninger
Currently numcpus is determined in pid_put_sample which is only called on sched_switch/sched_wakeup sample processing. On a machine with a lot cpus I often saw the last cpu missing. Check for (max) numcpus on every event happening and in the beginning. -> fixes the issue for me. Signed-off-by: Thomas Renninger <trenn@suse.de> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: lenb@kernel.org LKML-Reference: <1298842606-55712-6-git-send-email-trenn@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-28perf timechart: Fix black idle boxes in the titleThomas Renninger
This fix is needed for eye of gnome and firefox svg viewers. Only Inkscape can handle the broken case. Compare with the other svg_legenda_box declarations, looks like a typo slipped in at this place. Signed-off-by: Thomas Renninger <trenn@suse.de> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: lenb@kernel.org LKML-Reference: <1298842606-55712-5-git-send-email-trenn@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-28Merge remote branch 'nouveau/drm-nouveau-fixes' of /ssd/git/drm-nouveau-next ↵Dave Airlie
into drm-fixes * 'nouveau/drm-nouveau-fixes' of /ssd/git/drm-nouveau-next: drm/nv50-nvc0: make sure vma is definitely unmapped when destroying bo
2011-02-28drm: fix unsigned vs signed comparison issue in modeset ctl ioctl.Dave Airlie
This fixes CVE-2011-1013. Reported-by: Matthiew Herrb (OpenBSD X.org team) Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-28drm/nv50-nvc0: make sure vma is definitely unmapped when destroying boBen Skeggs
Somehow fixes a misrendering + hang at GDM startup on my NVA8... My first guess would have been stale TLB entries laying around that a new bo then accidentally inherits. That doesn't make a great deal of sense however, as when we mapped the pages for the new bo the TLBs would've gotten flushed anyway. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-02-27Merge branch 'fix' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into fixes
2011-02-27ARM: pxa/tosa: register wm9712 codec deviceDmitry Eremin-Solenikov
Since f0fba2ad1b it's required to register platform devices even for AC'97 codecs. Register one on tosa (wm9712-codec). Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-02-27ARM: pxa: enable pxa-pcm-audio on pxa210/pxa25x platformDmitry Eremin-Solenikov
pxa25x platforms were left out of major ASoC Update patch. Since f0fba2ad1b a registration of pxa-pcm-audio device is required for ASoC to function on pxa platforms. Register one also for pxa210/pxa25x. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-02-27ARM: pxa/colibri: don't register pxa2xx-pcmcia nodes on non-colibri platformsDmitry Eremin-Solenikov
PXA supports multi-machine kernels since long ago. However a kernel compiled with support for colibri and any other PXA machine and with PCMCIA enabled will barf at runtime about duplicate registration of pxa2xx-pcmcia device. Fix that. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-02-27ARM: pxa/tosa: drop setting LED trigger name, as it's unsupported nowDmitry Eremin-Solenikov
Since 2e48928d8a0f38c1b5c81eb3f1294de8a6382c68 it's no longer possible to set the name of the LED trigger for RFKILL events. Drop respective code from tosa-bt.c Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: John W. Linville <linville@tuxdriver.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-02-26hwmon: (adt7411) add MODULE_DEVICE_TABLEaxel lin
The device table is required to load modules based on modaliases. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-02-26hwmon: (ad7414) add MODULE_DEVICE_TABLEaxel lin
The device table is required to load modules based on modaliases. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-05-30 14:32:29 +0000