summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-03-15panda twl6030 enable all irq sourceslinaro-linux-2.6.38-upstream-16Mar2011Andy Green
This allows the overcurrent interrupt from twl6030 to be acknowledged so the panda board does not shutdown. Signed-off-by: Andy Green <andy.green@linaro.org> Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-03-15Merge commit '10a8c38' (rmk/misc branch) into linaro-2.6.38Nicolas Pitre
Conflicts: arch/arm/Kconfig
2011-03-15ARM: omap3: Fix assembler breakage in sleep34xx.SJohn Rigby
Assembler in latest binutils needs extra option to enable smc instructions introduced in: ARM: omap3: Remove hand-encoded SMC instructions Signed-off-by: John Rigby <john.rigby@linaro.org> Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-03-15Merge remote-tracking branch 'rmk/devel-stable' into linaro-2.6.38Nicolas Pitre
Conflicts: arch/arm/mach-exynos4/cpufreq.c arch/arm/mach-exynos4/irq-eint.c arch/arm/mach-mx5/clock-mx51-mx53.c arch/arm/mach-ux500/board-mop500-sdi.c arch/arm/plat-s5p/Makefile
2011-03-15Merge remote-tracking branch 'rmk/fixes' into linaro-2.6.38Nicolas Pitre
2011-03-15Merge commit 'v2.6.38' into linaro-2.6.38Nicolas Pitre
2011-03-15Merge branch 'for-rmk' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into devel-stable Conflicts: arch/arm/mm/Kconfig
2011-03-15Merge branch 'davinci-next-2' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci into devel-stable
2011-03-15davinci: DM644x EVM: register MUSB device earlierSergei Shtylyov
The MUSB driver doesn't see its platform device on DM644x EVM board anymore since commit 73b089b052a69020b953312a624a6e1eb5b81fab (usb: musb: split davinci to its own platform_driver) because the new probe is called as subsys_initcall() now, and the device is registered later than that by the board code. Move the registration to davinci_evm_init() -- it's safe to do so because the MUSB core device still gets initialized as fs_initcall() -- which is late enough for the I2C GPIO expander (which controls VBUS) to be initialized. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Acked-by: Felipe Balbi <balbi@ti.com> Tested-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-15davinci: add spi devices on tnetv107x evmCyril Chemparathy
This patch adds definitions for spi devices on the tnetv107x evm platform. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-15davinci: add ssp config for tnetv107x evm boardCyril Chemparathy
This patch adds SSP configuration and pin muxing info for tnetv107x evm boards. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-15davinci: add tnetv107x ssp platform deviceCyril Chemparathy
This patch adds an SSP platform device definition for the tnetv107x soc family. The clock lookup entry has also been updated to match. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-15spi: add ti-ssp spi master driverCyril Chemparathy
This patch adds an SPI master implementation that operates on top of an underlying TI-SSP port. Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-15mfd: add driver for sequencer serial portCyril Chemparathy
TI's sequencer serial port (TI-SSP) is a jack-of-all-trades type of serial port device. It has a built-in programmable execution engine that can be programmed to operate as almost any serial bus (I2C, SPI, EasyScale, and others). This patch adds a driver for this controller device. The driver does not expose a user-land interface. Protocol drivers built on top of this layer are expected to remain in-kernel. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-15ARM: EXYNOS4: Implement Clock gating for System MMUKyongHo Cho
This patch includes the implementation of the clock gating for System MMU. Initially, all System MMUs are not asserted the system clock. Asserting the system clock to a System MMU is enabled only when s5p_sysmmu_enable() is called. Likewise, it is disabled only when s5p_sysmmu_disable() is called. Therefore, clock gating on System MMUs are still invisible to the outside of the System MMU driver. Signed-off-by: KyongHo Cho <pullip.cho@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-15ARM: EXYNOS4: Enhancement of System MMU driverKyongHo Cho
This patch includes the following enhancements for System MMU: - Enhanced readability - Removal of unused data structures or their members - Simplified function definitions - Corrections of some logical errors - Full compliance with Linux coding style - Simpler way of registering callback functions of System MMU faults Signed-off-by: KyongHo Cho <pullip.cho@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-15ARM: EXYNOS4: Add support for gpio interruptsMarek Szyprowski
This patch adds support for gpio interrupts on Samsung EXYNOS4 platform. Common s5p-gpioint.c code is used for handling gpio interrupts. Each gpio line that needs gpio interrupt support must be later registered with s5p_register_gpio_interrupt() function. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-15ARM: S5P: Add function to register gpio interrupt bank dataMarek Szyprowski
This patch removes all global data from common s5p gpio interrupt handler code. This enables to reuse this code on EXYNOS4 platform. Instead of global data (IRQ_GPIOINT interrupt number, S5P_GPIOINT_GROUP_MAXNR groups count), a s5p_register_gpioint_bank() function is introduced. It is aimed to be called from gpiolib init. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-15ARM: S5P: Cleanup S5P gpio interrupt codeMarek Szyprowski
This patch performs a global cleanup in s5p gpio interrupt support code. The code is prepared for upcoming support for gpio interrupts on EXYNOS4 platform, which has 2 gpio banks (regions) instead of one (like on S5PC110 and S5PC100). Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-15ARM: EXYNOS4: Add missing GPYx banksMarek Szyprowski
This patch adds missing GPYx gpio banks on Samsung EXYNOS4 platform. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-15ARM: S3C64XX: Fix section mismatch from cpufreq initMark Brown
The cpufreq init function is referenced from the driver structure and we don't appear to have annotations which allow us to mark that it'll never be called after system init, causing the linker consistency infrastructure to complain. Just remove the __init annotation to avoid noise from the build. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-15ARM: EXYNOS4: Add keypad device to the SMDKV310Naveen Krishna Ch
This patch is to support keypad device to the SMDKV310 board. Signed-off-by: Naveen Krishna Ch <ch.naveen@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-15ARM: EXYNOS4: Update clocks for keypadNaveen Krishna Ch
The keypad IF on EXYNOS4 uses 100MHz from PERIR functional block for clocks, this patch updates the same. Signed-off-by: Naveen Krishna Ch <ch.naveen@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-15ARM: EXYNOS4: Update keypad base addressNaveen Krishna Ch
This patch updates the keypad IF base address in the memory map for EXYNOS4. Signed-off-by: Naveen Krishna Ch <ch.naveen@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-15ARM: EXYNOS4: Add keypad device helpersNaveen Krishna Ch
This patch adds the samsung_keypad_cfg_gpio() for EXYNOS4. Now, this helpers are only for keypad operating in PORT-0. Signed-off-by: Naveen Krishna Ch <ch.naveen@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-15ARM: 6806/1: irq: introduce entry and exit functions for chained handlersWill Deacon
Some chained IRQ handlers are written to cope with primary chips of potentially different flow types. Whether this a sensible thing to do is a point of contention. This patch introduces entry/exit functions for chained handlers which infer the flow type of the primary chip as fasteoi or level-type by checking whether or not the ->irq_eoi function pointer is present and calling back to the primary chip as necessary. Other methods of flow control are not considered. Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-03-15ARM: EXYNOS4: Add support for SATA on ARMLEX4210Abhilash Kesavan
Adds the device definitions, platform specific initialization and clocks for SATA on ARMLEX4210. Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-14Linux 2.6.38v2.6.38Linus Torvalds
2011-03-14Merge branch 'for-rmk-devel-stable' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into devel-stable
2011-03-14Merge branch 'davinci-next' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci into devel-stable
2011-03-14Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-mn10300 * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-mn10300: MN10300: atomic_read() should ensure it emits a load MN10300: The SMP_ICACHE_INV_FLUSH_RANGE IPI command does not exist MN10300: Proper use of macros get_user() in the case of incremented pointers
2011-03-14Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: (26 commits) MIPS: Alchemy: Fix reset for MTX-1 and XXS1500 MIPS: MTX-1: Make au1000_eth probe all PHY addresses MIPS: Jz4740: Add HAVE_CLK MIPS: Move idle task creation to work queue MIPS, Perf-events: Use unsigned delta for right shift in event update MIPS, Perf-events: Work with the new callchain interface MIPS, Perf-events: Fix event check in validate_event() MIPS, Perf-events: Work with the new PMU interface MIPS, Perf-events: Work with irq_work MIPS: Fix always CONFIG_LOONGSON_UART_BASE=y MIPS: Loongson: Fix potentially wrong string handling MIPS: Fix GCC-4.6 'set but not used' warning in arch/mips/mm/init.c MIPS: Fix GCC-4.6 'set but not used' warning in ieee754int.h MIPS: Remove unused code from arch/mips/kernel/syscall.c MIPS: Fix GCC-4.6 'set but not used' warning in signal*.c MIPS: MSP: Fix MSP71xx bpci interrupt handler return value MIPS: Select R4K timer lib for all MSP platforms MIPS: Loongson: Remove ad-hoc cmdline default MIPS: Clear the correct flag in sysmips(MIPS_FIXADE, ...). MIPS: Add an unreachable return statement to satisfy buggy GCCs. ...
2011-03-14Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: ce4100: Set pci ops via callback instead of module init x86/mm: Fix pgd_lock deadlock x86/mm: Handle mm_fault_error() in kernel space x86: Don't check for BIOS corruption in first 64K when there's no need to
2011-03-14Revert "oom: oom_kill_process: fix the child_points logic"Linus Torvalds
This reverts the parent commit. I hate doing that, but it's generating some discussion ("half of it is right"), and since I am planning on doing the 2.6.38 release later today we can punt it to stable if required. Let's not rock the boat right now. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-14oom: oom_kill_process: fix the child_points logicOleg Nesterov
oom_kill_process() starts with victim_points == 0. This means that (most likely) any child has more points and can be killed erroneously. Also, "children has a different mm" doesn't match the reality, we should check child->mm != t->mm. This check is not exactly correct if t->mm == NULL but this doesn't really matter, oom_kill_task() will kill them anyway. Note: "Kill all processes sharing p->mm" in oom_kill_task() is wrong too. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-14MIPS: Alchemy: Fix reset for MTX-1 and XXS1500Florian Fainelli
Since commit 32fd6901 (MIPS: Alchemy: get rid of common/reset.c) Alchemy-based boards use their own reset function. For MTX-1 and XXS1500, the reset function pokes at the BCSR.SYSTEM_RESET register, but this does not work. According to Bruno Randolf, this was not tested when written. Previously, the generic au1000_restart() routine called the board specific reset function, which for MTX-1 and XXS1500 did not work, but finally made a jump to the reset vector, which really triggers a system restart. Fix reboot for both targets by jumping to the reset vector. Signed-off-by: Florian Fainelli <florian@openwrt.org> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2093/ Acked-by: Bruno Randolf <br1@einfach.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-14MIPS: MTX-1: Make au1000_eth probe all PHY addressesFlorian Fainelli
When au1000_eth probes the MII bus for PHY address, if we do not set au1000_eth platform data's phy_search_highest_address, the MII probing logic will exit early and will assume a valid PHY is found at address 0. For MTX-1, the PHY is at address 31, and without this patch, the link detection/speed/duplex would not work correctly. CC: stable@kernel.org Signed-off-by: Florian Fainelli <florian@openwrt.org> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2111/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-14MIPS: Jz4740: Add HAVE_CLKMaurus Cuelenaere
Jz4740 supports the clock framework but doesn't have HAVE_CLK defined, so define it! Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com> To: linux-mips@linux-mips.org To: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/2112/ Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-14MIPS: Move idle task creation to work queueMaksim Rayskiy
To avoid forking usermode thread when creating an idle task, move fork_idle to a work queue. If kernel starts with maxcpus= option which does not bring all available cpus online at boot time, idle tasks for offline cpus are not created. If later offline cpus are hotplugged through sysfs, __cpu_up is called in the context of the user task, and fork_idle copies its non-zero mm pointer. This causes BUG() in per_cpu_trap_init. This also avoids issues with resource limits of the CPU writing to sysfs, containers, maybe others. Signed-off-by: Maksim Rayskiy <mrayskiy@broadcom.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2070/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-14MIPS, Perf-events: Use unsigned delta for right shift in event updateDeng-Cheng Zhu
Leverage the commit for ARM by Will Deacon: - 446a5a8b1eb91a6990e5c8fe29f14e7a95b69132 ARM: 6205/1: perf: ensure counter delta is treated as unsigned Hardware performance counters on ARM are 32-bits wide but atomic64_t variables are used to represent counter data in the hw_perf_event structure. The armpmu_event_update function right-shifts a signed 64-bit delta variable and adds the result to the event count. This can lead to shifting in sign-bits if the MSB of the 32-bit counter value is set. This results in perf output such as: Performance counter stats for 'sleep 20': 18446744073460670464 cycles <-- 0xFFFFFFFFF12A6000 7783773 instructions # 0.000 IPC 465 context-switches 161 page-faults 1172393 branches 20.154242147 seconds time elapsed This patch ensures that the delta value is treated as unsigned so that the right shift sets the upper bits to zero. Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> To: a.p.zijlstra@chello.nl To: fweisbec@gmail.com To: will.deacon@arm.com Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: wuzhangjin@gmail.com Cc: paulus@samba.org Cc: mingo@elte.hu Cc: acme@redhat.com Cc: matt@console-pimps.org Cc: sshtylyov@mvista.com Patchwork: http://patchwork.linux-mips.org/patch/2015/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-14MIPS, Perf-events: Work with the new callchain interfaceDeng-Cheng Zhu
This is the MIPS part of the following commits by Frederic Weisbecker: - f72c1a931e311bb7780fee19e41a89ac42cab50e perf: Factorize callchain context handling Store the kernel and user contexts from the generic layer instead of archs, this gathers some repetitive code. - 56962b4449af34070bb1994621ef4f0265eed4d8 perf: Generalize some arch callchain code - Most archs use one callchain buffer per cpu, except x86 that needs to deal with NMIs. Provide a default perf_callchain_buffer() implementation that x86 overrides. - Centralize all the kernel/user regs handling and invoke new arch handlers from there: perf_callchain_user() / perf_callchain_kernel() That avoid all the user_mode(), current->mm checks and so... - Invert some parameters in perf_callchain_*() helpers: entry to the left, regs to the right, following the traditional (dst, src). - 70791ce9ba68a5921c9905ef05d23f62a90bc10c perf: Generalize callchain_store() callchain_store() is the same on every archs, inline it in perf_event.h and rename it to perf_callchain_store() to avoid any collision. This removes repetitive code. - c1a65932fd7216fdc9a0db8bbffe1d47842f862c perf: Drop unappropriate tests on arch callchains Drop the TASK_RUNNING test on user tasks for callchains as this check doesn't seem to make any sense. Also remove the tests for !current that is not supposed to happen and current->pid as this should be handled at the generic level, with exclude_idle attribute. Reported-by: Wu Zhangjin <wuzhangjin@gmail.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> To: a.p.zijlstra@chello.nl To: will.deacon@arm.com Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: paulus@samba.org Cc: mingo@elte.hu Cc: acme@redhat.com Cc: dengcheng.zhu@gmail.com Cc: matt@console-pimps.org Cc: sshtylyov@mvista.com Patchwork: http://patchwork.linux-mips.org/patch/2014/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-14MIPS, Perf-events: Fix event check in validate_event()Deng-Cheng Zhu
Ignore events that are in off/error state or belong to a different PMU. This patch originates from the following commit for ARM by Will Deacon: - 65b4711ff513767341aa1915c822de6ec0de65cb ARM: 6352/1: perf: fix event validation The validate_event function in the ARM perf events backend has the following problems: 1.) Events that are disabled count towards the cost. 2.) Events associated with other PMUs [for example, software events or breakpoints] do not count towards the cost, but do fail validation, causing the group to fail. This patch changes validate_event so that it ignores events in the PERF_EVENT_STATE_OFF state or that are scheduled for other PMUs. Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> To: a.p.zijlstra@chello.nl To: fweisbec@gmail.com To: will.deacon@arm.com Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: wuzhangjin@gmail.com Cc: paulus@samba.org Cc: mingo@elte.hu Cc: acme@redhat.com Cc: dengcheng.zhu@gmail.com Cc: matt@console-pimps.org Cc: sshtylyov@mvista.com Cc: ddaney@caviumnetworks.com Patchwork: http://patchwork.linux-mips.org/patch/2013/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-14MIPS, Perf-events: Work with the new PMU interfaceDeng-Cheng Zhu
This is the MIPS part of the following commits by Peter Zijlstra: - a4eaf7f14675cb512d69f0c928055e73d0c6d252 perf: Rework the PMU methods Replace pmu::{enable,disable,start,stop,unthrottle} with pmu::{add,del,start,stop}, all of which take a flags argument. The new interface extends the capability to stop a counter while keeping it scheduled on the PMU. We replace the throttled state with the generic stopped state. This also allows us to efficiently stop/start counters over certain code paths (like IRQ handlers). It also allows scheduling a counter without it starting, allowing for a generic frozen state (useful for rotating stopped counters). The stopped state is implemented in two different ways, depending on how the architecture implemented the throttled state: 1) We disable the counter: a) the pmu has per-counter enable bits, we flip that b) we program a NOP event, preserving the counter state 2) We store the counter state and ignore all read/overflow events For MIPSXX, the stopped state is implemented in the way of 1.b as above. - 33696fc0d141bbbcb12f75b69608ea83282e3117 perf: Per PMU disable Changes perf_disable() into perf_pmu_disable(). - 24cd7f54a0d47e1d5b3de29e2456bfbd2d8447b7 perf: Reduce perf_disable() usage Since the current perf_disable() usage is only an optimization, remove it for now. This eases the removal of the __weak hw_perf_enable() interface. - b0a873ebbf87bf38bf70b5e39a7cadc96099fa13 perf: Register PMU implementations Simple registration interface for struct pmu, this provides the infrastructure for removing all the weak functions. - 51b0fe39549a04858001922919ab355dee9bdfcf perf: Deconstify struct pmu sed -ie 's/const struct pmu\>/struct pmu/g' `git grep -l "const struct pmu\>"` Reported-by: Wu Zhangjin <wuzhangjin@gmail.com> Acked-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> To: a.p.zijlstra@chello.nl To: fweisbec@gmail.com To: will.deacon@arm.com Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: wuzhangjin@gmail.com Cc: paulus@samba.org Cc: mingo@elte.hu Cc: acme@redhat.com Cc: dengcheng.zhu@gmail.com Cc: matt@console-pimps.org Cc: sshtylyov@mvista.com Cc: ddaney@caviumnetworks.com Patchwork: http://patchwork.linux-mips.org/patch/2012/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-14MIPS, Perf-events: Work with irq_workDeng-Cheng Zhu
This is the MIPS part of the following commit by Peter Zijlstra: - e360adbe29241a0194e10e20595360dd7b98a2b3 irq_work: Add generic hardirq context callbacks Provide a mechanism that allows running code in IRQ context. It is most useful for NMI code that needs to interact with the rest of the system -- like wakeup a task to drain buffers. Perf currently has such a mechanism, so extract that and provide it as a generic feature, independent of perf so that others may also benefit. The IRQ context callback is generated through self-IPIs where possible, or on architectures like powerpc the decrementer (the built-in timer facility) is set to generate an interrupt immediately. Architectures that don't have anything like this get to do with a callback from the timer tick. These architectures can call irq_work_run() at the tail of any IRQ handlers that might enqueue such work (like the perf IRQ handler) to avoid undue latencies in processing the work. For MIPSXX, we need to call irq_work_run() at the tail of the perf IRQ handler as described above. Reported-by: Wu Zhangjin <wuzhangjin@gmail.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> To: fweisbec@gmail.com To: will.deacon@arm.com Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: paulus@samba.org Cc: mingo@elte.hu Cc: acme@redhat.com Cc: matt@console-pimps.org Cc: sshtylyov@mvista.com, Patchwork: http://patchwork.linux-mips.org/patch/2011/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-14MIPS: Fix always CONFIG_LOONGSON_UART_BASE=yYoichi Yuasa
Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Cc: linux-mips <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2055/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-14MIPS: Loongson: Fix potentially wrong string handlingStefan Weil
This error was reported by cppcheck: arch/mips/loongson/common/machtype.c:56: error: Dangerous usage of 'str' (strncpy doesn't always 0-terminate it) If strncpy copied MACHTYPE_LEN bytes, the destination string str was not terminated. The patch adds one more byte to str and makes sure that this byte is always 0. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Cc: Wu Zhangjin <wuzhangjin@gmail.com> Cc: Arnaud Patard <apatard@mandriva.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/2053/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-14MIPS: Fix GCC-4.6 'set but not used' warning in arch/mips/mm/init.cDavid Daney
Under some combinations of CONFIG_*, lastpfn in page_is_ram is 'set but not used'. Mark it as __maybe_unused to quiet the warning/error. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2033/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-14MIPS: Fix GCC-4.6 'set but not used' warning in ieee754int.hDavid Daney
GCC-4.6 can find more unused code than previous versions could. In the case of arch/mips/math-emu/ieee754int.h, the COMPXSP and COMPXDP macros are used in several places, but a couple of them leave xs unused. The easiest thing to do is mark it as __maybe_unused to quiet the warning. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2032/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-14MIPS: Remove unused code from arch/mips/kernel/syscall.cDavid Daney
The variable arg3 in _sys_sysmips() is unused. Remove it. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2034/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-14MIPS: Fix GCC-4.6 'set but not used' warning in signal*.cDavid Daney
GCC-4.6 can find more unused code than previous versions could. In the case of protected_restore_fp_context{,32}, the variable tmp is really used. Its use is tricky in that we really care about the side effects of the __put_user() calls. So we must mark tmp with __maybe_unused to quiet the warning. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2035/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-06-11 02:49:45 +0000