summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-06-04core: Fix for prcmu pending interrupt during suspendmach-platramesh.chandrasekaran
Signed-off-by: ramesh.chandrasekaran <ramesh.chandrasekaran@stericsson.com>
2012-05-25core: Fix for Ethernet doesn't work after suspendramesh.chandrasekaran
Signed-off-by: ramesh.chandrasekaran <ramesh.chandrasekaran@stericsson.com>
2012-05-22ux500: dma: Give parent device to dma initializationPhilippe Langlais
Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org>
2012-05-22ux500: cw1200: Give parent device to wlan initializationPhilippe Langlais
Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org>
2012-05-22board-mop500: changing default user_led trigger to heartbeatRicardo Salveti de Araujo
The snowball user_led is enabled and exported to userspace, but no useful default trigger is currently enabled by default. This patch is to just change the default trigger when heartbeat is compiled and enabled, so it can report the CPU status already during boot. Signed-off-by: Ricardo Salveti de Araujo <ricardo.salveti@linaro.org>
2012-05-22mach-ux500: try to manage parent device for sound devices at initPhilippe Langlais
Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org>
2012-05-22mach-ux500: id.c: Include missing <linux/export.h>Philippe Langlais
Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org>
2012-05-22cyttsp: ux500: Partial port to new cyttsp ts driver into mop500 board for 3.4Philippe Langlais
Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org>
2012-05-22mach-ux500: reboot: Porting on 3.4Philippe Langlais
Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org>
2012-05-22mach-ux500: Include new <asm/system_misc.h> in 3.4 for arm_pm_restartPhilippe Langlais
Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org>
2012-05-22mach-ux500: dt: workaround for 3.4 porting, the mop500 gpios keys management ↵Philippe Langlais
moved into board-mop500-uib.c Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org>
2012-05-22mach-ux500: device-common: Temporary re-add deleted functions in mainlinePhilippe Langlais
Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org>
2012-05-22inlining without body is not allowed with gcc 4.7Bernhard Rosenkranzer
Adding 'inline' before a function requires that the body be provided in the same file when using gcc 4.7. Signed-off-by: Bernhard Rosenkranzer <bernhard.rosenkranzer@linaro.org> Committed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
2012-05-22snowball: removing GPIO161 config for external connectorMathieu J. Poirier
On snwoball V5 and up GPIO161 is routed to PMU_EN of the cg2900 and as such shouldn't be configured to handle an event from the external connector (J23). Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
2012-05-22ux500: cg2900: Change the PMU_EN gpio for snowballRobert MARKLUND
Snowball have the GPIO_EN on GPIO161 diffrent from u8500. Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
2012-05-22ux500: vibrator: Add u8520 & u9540 supportPhilippe Langlais
Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org>
2012-05-22ux500: u5500: timed output driver for ab5500 vibratorShreshtha Kumar Sahu
Simple timed output vibrator driver for AB5500 MFD chips. This chip supports Rotary and Linear vibrator hardware types. Resonance frequency of 100-198 Hz is supported. ST-Ericsson ID: WP 256408 Signed-off-by: Avinash A <Avinash.a@stericsson.com> Signed-off-by: Robert Marklund <robert.marklund@stericsson.com> u5500: enable vibrator when new timeout is requested with this patch new timeout value will be accepted/updated even if vibrator is already executing. ST-Ericsson ID: 360178 Signed-off-by: Avinash A <Avinash.a@stericsson.com> vibra:Remove unnecessary assignment of dev->parent Remove unnecessary assignment of dev->parent, because of this during timed out class unregister it is trying to free resources of parent which does not exist ST-Ericsson ID: 410065 Signed-off-by: Naga Radhesh <naga.radheshy@stericsson.com> u5500: Add vibra end of life support Detect and disable vibra when vibra end of life(eol) condition is detected at boot sequence. ST-Ericsson ID: 265890 Signed-off-by: Rajagopala V <rajagopala.v@stericsson.com>
2012-05-22ux500: u8500: Vibrator: Timed output vibrator driverMarcin Mielczarczyk
ST-Ericsson vibrator driver which registers in Android specific timed output device class. Signed-off-by: Marcin Mielczarczyk <marcin.mielczarczyk@tieto.com> Signed-off-by: Jerzy Kasenberg <jerzy.kasenberg@tieto.com> Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Timed output vibrator: New functionality. This patch allows to form the vibration characteristic using few parameters defined in the platform data: - boost level and period for start condition - on level as moderate speed - off level and period for brake condition Detailed information can be found here: Documentation\DocBook\ste_timed_vibra.html Signed-off-by: Grzegorz Sygieda <grzegorz.sygieda@tieto.com> Signed-off-by: Krzysztof Antonowicz <krzysztof.antonowicz@tieto.com> Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> vibrator: remove board specific control of vibrator Platform specific control of vibrator should be present in board file (here board-mop500.c). So, for example if GPIO pins are used to control the vibrator, its control function implemenation should be in board file. This patch provides the callback function support in the driver for the same. Signed-off-by: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com> android: vibrator: dont directly access ktime_t members Use ktime helper functions for converting ktime values Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> u8500: vibra: linear vibrators using vibra-pwm Linear vibrators operate on thier required resonance frequency (for COPAL and AAC its ~150Hz). This can be provided using AUDIO DA5 path. This software *workaround* enables linear vibrators using AB8500 vibra-pwm by generating required resonace frequency using software. In addition this patch provides support for separate platform data for Linear and Rotarty vibrators. Signed-off-by: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com> u8500: vibra: disable vibrator after vibration This patch disables vibrator i.e. configures the PWM duty cycle to zero after vibration duration is over. Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org> u8500: optimize: linear vibra drv using vibra-pwm This patch optimizes the current implementation of "linear vibrator driver using vibra-pwm". Current implementation is CPU intensive and uses 100% of a CPU for the time period vibrator is used. ST-Ericsson ID: ER 349958 Signed-off-by: Avinash A <Avinash.a@stericsson.com> u8500: vibra: fix sleeping fn. in atomic context sleepable call - flush_workqueue called from atomic context of vibra_enable. ST-Ericsson ID: ER 351276 Signed-off-by: Avinash A <Avinash.a@stericsson.com> u8500: vibra: remove race condition in timer operation In situation described below, vibra driver can hang. In a scenario where vibra_enable is called and vibrator is running i.e. vibra_work is scheduled and vibra_timer. Suppose vibra_timer is started and has not expired yet. At this moment if vibra_work starts executing and acquires the vibra_lock and just before hrtimer_cancel is called, if old timer expires and timer callback starts executing then it will try to acquire vibra_lock and hence it will wait for vibra_lock, as it is already acquired by vibra_work. Now vibra_work->hrtimer_cancel will wait for timer callback to complete and timer callback will wait for vibra_lock to be free so that it can complete. This result in recursive waiting for vibra_lock and hence deadlock. As timer callback is running in interrupt context so above deadlock may trigger watchdog. ST-Ericsson ID: 405366 Signed-off-by: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com> u8500: vibra: remove race condition in open In situation described below, vibra driver can hang. vibra_enable takes the vibra_lock and timer expires then timer callback will spin for vibra_lock. If vibra_enable tries to do hrtimer_cancel then it will wait for timer callback to complete. In above situation hrtimer_cancel will wait for timer callback to complete and timer callback will wait for vibra_lock to be free so that it can complete. This result in recursive waiting for vibra_lock and hence deadlock. As timer callback is running in interrupt context so above deadlock may trigger watchdog. ST-Ericsson ID: 407253 Signed-off-by: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com> vibra:Remove unnecessary assignment of dev->parent Remove unnecessary assignment of dev->parent, because of this during timed out class unregister it is trying to free resources of parent which does not exist Signed-off-by: Naga Radhesh <naga.radheshy@stericsson.com>
2012-05-22ux500: ARM: u8500: power: idle testJonas Aaberg
Add power module test. This test, in debugfs/pwr_test/idle shall pass when the screen is black, but suspend is not yet reached. This module test checks clocks, prcmu-regulators, db8500 regulators and ab8500 regulators. The reason why not adding this to LTP is that later this module test will contain tests for voicecall and low-power-audio, which require Android to run. ST-Ericsson ID: 367599 Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
2012-05-22mach-ux500: Camera flash put under conditional compilationPhilippe Langlais
Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org>
2012-05-22mach-ux500: Put b2r2 specific stuff under conditional compilationPhilippe Langlais
Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org>
2012-05-22ux500: [ANDROID]: b2r2: Add kernel API to b2r2 and moreJorgen Nilsson
Brief: As a preparation for the ICS hardware composer solution a kernel API has been added to the b2r2 driver. Some minor stability fixes are also part of this release. The full support for dual b2r2 configuration should be in place, but has yet to be verified with the apropriate hardware. The change should have minor impact on the single core solution. Details: A new logical device for handling the blitter requests has been added. This is roughly the same device as the old blitter the interfaces are therefore the same. From now there is at least two devices - one blitter device and then for each core one additional device (dual configuration is the current target). As a consequence the maximum number of allowed cores has been raised from 1 to 2. When a dual configuration is active the b2r2 driver seamlessly splits requests over available b2r2 cores. Each request is assigned a core_mask defining which cores are doing part of the job. This helps keep track when waiting for the reports. Also, rectangles are now recalculated (based on intersection of destination rectangle and destination image etc.) before splitting the job in order to maximize throughput. Clock and power source can now be configured from devices-dbxxxx.c or equivalent. Minor bug fixes: - Check the return value from clk_enable - Check if the core is valid before serving a IRQ. - Check if the core is enabled (domain_enabled) before adding a new job. - Return actual job_id used for a request (previously always 0) ST-Ericsson ID: 404691 Original Change-Id: Ic3357c4c1e792a84077c1be4ba4c5acdb19da266 Signed-off-by: Jorgen Nilsson <jorgen.nilsson@stericsson.com>
2012-05-22ux500: mfd: db8500-prcmu: add function to read reset statusMattias Nilsson
This patch adds a function that returns the value of the reset status register at startup. It also changes the read of the (software) reset code, so that the saved value is only read at startup. ST Ericsson ID: 366664 ST Ericsson FOSS-OUT ID: trivial Signed-off-by: Mattias Nilsson <mattias.i.nilsson@stericsson.com>
2012-05-22ARM: ux500: input: abx500-accdet: Move header fileJonas Aaberg
Move header file from include/mach to include/linux/input since it belongs to a driver not to a certain mach. ST-Ericsson ID: 370799 Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
2012-05-22ux500: input:misc:accdet: Add ab8505 accessory detect supportVirupax Sadashivpetimath
Add the new mic control gpio found in the 8520 board. Gpio is used to configure the mux, so that the 3.5mm jack gets connected to either the audio or video part of the board. ST-Ericsson ID: 366316 Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com>
2012-05-22mach-ux500: Set default values for AB8505 gpio'sNaga Radhesh
Set default values for config and pullup registers as per AB8505 specifications. ST-Ericsson ID: 366316 ST-Ericsson Linux next: NA ST-Ericsson FOSS-OUT ID: Trivial Change-Id:I33a13ea4690b65ec6eb546e6d896c95cb85526f7 Signed-off-by: Naga Radhesh <naga.radheshy@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/50689 Reviewed-by: QATOOLS Reviewed-by: QABUILD Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
2012-05-22mach-ux500: platform data for pwm driverNaga Radhesh
platform data for pwm driver, which contains no.of supported pwm and pwm out led's ST-Ericsson ID: 366316 Signed-off-by: Naga Radhesh <naga.radheshy@stericsson.com>
2012-05-22ARM: u8500: board-mop500: No ske if hw debuggerJonas Aaberg
Do not load the nomadik ske driver, if a hw debugger is attached since their gpio usage collides ST-Ericsson Linux next: - ST-Ericsson ID: 370799 ST-Ericsson FOSS-OUT ID: Trivial Change-Id: Ibe93d4c9f2a6ffeb79dd21cd520abde82f8fa247 Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/50231 Reviewed-by: Rickard ANDERSSON <rickard.andersson@stericsson.com> Reviewed-by: QABUILD Reviewed-by: QATEST
2012-05-22ARM : ux500: Fix PRCC set and clear register for soft resetFredrik Soderstedt
Correct values for PRCC_K_SOFTRST_SET and PRCC_K_SOFTRST_CLR. Fix minor typo for PRCC_K_SOFTRST_SDI0_MASK. ST-Ericsson ID: - Signed-off-by: Fredrik Soderstedt <fredrik.soderstedt@stericsson.com>
2012-05-22ARM: ux500: cyttsp: Fix file permissionJonas Aaberg
ST-Ericsson Linux next: - ST-Ericsson ID: 370799 ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I7d21fb42764eb5f46acff7d144784c49e0aee4ea Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/48103
2012-05-22mach-ux500: Update U8520 SD-card GPIO pinsJohan Rudholm
ST-Ericsson ID: 371953 Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com>
2012-05-22ux500: mfd: ab8500: Configure AB8505Bengt Jonsson
ST-Ericsson ID: 371953 Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com>
2012-05-22ux500: Add U8520 machineBengt Jonsson
ST-Ericsson ID: 371953 Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com>
2012-05-22mach-ux500 : 9540 prcmu dump, contextMichel JAOUEN
ST-Ericsson ID: 409625 Signed-off-by: Guillaume Kouadio Carry <guillaume.kouadio-carry@stericsson.com> Signed-off-by: Alex MACRO <alex.macro@stericsson.com> Signed-off-by: David Paris <david.paris@stericsson.com> Signed-off-by: Michel JAOUEN <michel.jaouen@stericsson.com>
2012-05-22mach-ux500: 9540 prcmu specific ioMichel JAOUEN
ST-Ericsson ID: 409625 ST-Ericsson FOSS-OUT ID: trivial ST-Ericsson Linux next: NA Signed-off-by: Guillaume Kouadio Carry <guillaume.kouadio-carry@stericsson.com> Signed-off-by: Alex MACRO <alex.macro@stericsson.com> Signed-off-by: David Paris <david.paris@stericsson.com> Signed-off-by: Michel JAOUEN <michel.jaouen@stericsson.com> Change-Id: I571feedb3a316250691e381e8d53e226b98ea7c3 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/45302 Reviewed-by: QATEST Reviewed-by: Linus WALLEIJ <linus.walleij@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Tested-by: Michel JAOUEN <michel.jaouen@stericsson.com> Reviewed-by: Michel JAOUEN <michel.jaouen@stericsson.com>
2012-05-22mach-ux500: support ape u9450Michel JAOUEN
id, cpu, irq, reg, timer, uart, l2 cache. ST-Ericsson ID: 409625 Signed-off-by: Michel JAOUEN <michel.jaouen@stericsson.com>
2012-05-22mach-ux500: Add support for 9540Yann Gautier
ST-Ericsson ID: 398896 Signed-off-by: Yann Gautier <yann.gautier@stericsson.com>
2012-05-22mach-ux500:board-u5500: Add missing return valueVirupax Sadashivpetimath
ST-Ericsson ID: 412077 ST-Ericsson Linux next: N/A ST-Ericsson FOSS-OUT ID: Trivial Change-Id: Ifdc03da2d01f6b2d3f140d83a18080feda08acaf Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/47101 Reviewed-by: QABUILD Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
2012-05-22mach-ux500: video: mcde: add rotbufsizePhilippe Langlais
This adds rotbufsize and moves the declaration of the rotbufs from the board-mop500-mcde.c file to the devices-db8500.c file. ST-Ericsson ID: 373680 ST-Ericsson FOSS-OUT ID: Trivial ST-Ericsson Linux next: NA Signed-off-by: Torbjorn Svensson <torbjorn.x.svensson@stericsson.com>
2012-05-22u8500: Don't probe modem related drivers for AP9500Shreshtha Kumar Sahu
AP9500 is similar to u8500 except that it has no modem in it. This patch disabled loading of SHRM and Modem drivers if the SOC is AP9500. ST-Ericsson Linux next: - ST-Ericsson ID: 363927 ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I043b65f31478061e9d5cef1c7c24ce4a095b2d65 Signed-off-by: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/44470 Reviewed-by: Bibek BASU <bibek.basu@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
2012-05-22mach-ux500: Add platform data for ADP1653 in R3UIBRajat Verma
Platform specific data for camera flash chip ADP1653 has been added in R3UIB board configuration file. ST-Ericsson Linux next: NA ST-Ericsson ID: 375189 ST-Ericsson FOSS-OUT ID: Trivial Change-Id: Ib5f622fe41b48ebd231fe5f296311f82059b84e3 Signed-off-by: Rajat Verma <rajat.verma@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/45185 Reviewed-by: QATOOLS Reviewed-by: QABUILD Reviewed-by: QATEST Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
2012-05-22mach-ux500: musb: Add pm runtime supportPhilippe Langlais
Add pm runtime support for musb, including both pin and clock handling. Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Sakethram Bommisetti <sakethram.bommisetti@stericsson.com>
2012-05-22pl011: add soft reset routine for each uart instanceShreshtha Kumar Sahu
This patch provides generic IP reset routine for CPU which is also used to do uart soft reset for each uart instance. As soft reset is platform dependent hence each uart's platform data reset() function pointer is updated with the same. ST-Ericsson ID: 411803 ST-Ericsson FOSS-OUT ID: Trivial ST-Ericsson Linux next: NA Change-Id: Idde32d3ca8f241f40c1071ecb580e43f14a3c6d1 Signed-off-by: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/45918 Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com>
2012-05-22ux500: touch: Align touch with displayMarcus Lorentzon
When hiding display physical orientation in previous patch touch gets out of sync with display. This patch realign touch with display. ST-Ericsson ID: 368097 ST-Ericsson FOSS-OUT ID: Trivial ST-Ericsson Linux next: NA Change-Id: I49ee8e5cb0b9646c4b5f84a2d679f683c35c28ce Signed-off-by: Marcus Lorentzon <marcus.xm.lorentzon@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/37720 Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com> Reviewed-by: QATOOLS Reviewed-by: QABUILD Reviewed-by: QATEST Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
2012-05-22mach-ux500: Change dump size of prcmu_icn_pmuJohan Bjornstedt
The valid size of prcmu_icn_pmu is 0x90. ST-Ericsson ID: 403009 ST-Ericsson FOSS-OUT ID: Trivial ST-Ericsson Linux next: N/A Change-Id: I3f333255c893d69c22be97007734ddb07296da26 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/45475 Tested-by: Johan BJORNSTEDT <johan.bjornstedt@stericsson.com> Reviewed-by: Per FRANSSON <per.xx.fransson@stericsson.com> Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
2012-05-22mach-ux500: Save dbx500 registers on panicJohan Bjornstedt
Before, the registers were only saved in case of die. With this patch, also calls to panic() will save DB registers ST-Ericsson ID: 403009 ST-Ericsson FOSS-OUT ID: Trivial ST-Ericsson Linux next: N/A Change-Id: Ie18a3632acd37d5d373dd9d71b57bdf62841f44e Signed-off-by: Johan Bjornstedt <johan.bjornstedt@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/41945 Reviewed-by: Per FRANSSON <per.xx.fransson@stericsson.com> Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
2012-05-22skekeypad:Release all acquired resourcesNaga Radhesh
During remove release the clock,irq's and gpio pins properly. ST-Ericsson ID: 410064 ST-Ericsson Linux next: NA ST-Ericsson FOSS-OUT ID: Trivial Change-Id:I68fdc2fd16ca6476166b8a89e01eed0f02679fd9 Signed-off-by: Naga Radhesh <naga.radheshy@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/45282 Reviewed-by: QATOOLS Reviewed-by: QABUILD Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
2012-05-22mach-ux500: Export dbx500_id symbolAndreas Westin
dbx500_id symbol should be exported so drivers compiled as modules and uses this functionality does not fail. ST-Ericsson ID: 410412 ST-Ericsson FOSS-OUT ID: Trivial ST-Ericsson Linux next: N/A Change-Id: I1eeb571b5224df7f9ef6f0eaf83a9fd56cb29b6a Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/45386 Reviewed-by: Joakim BECH <joakim.xx.bech@stericsson.com> Reviewed-by: QABUILD Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com> Tested-by: Andreas WESTIN <andreas.westin@stericsson.com>
2012-05-22mach-ux500: Save db8500 fuses on crashRikard Olsson
Reads specific db8500 fuse registers in case of kernel crash and saves it in kernel system memory. ST-Ericsson ID: 404278 ST-Ericsson FOSS-OUT ID: Trivial ST-Ericsson Linux next: N/A Change-Id: I7e856dbdcba1aa6653a5d06079a985207812555a Signed-off-by: Rikard Olsson <rikard.p.olsson@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/45174 Reviewed-by: Johan BJORNSTEDT <johan.bjornstedt@stericsson.com> Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
2012-05-22U5500: Set unused AB5500 pins as GPIOVijaya Kumar Kilari
Some unused pins of AB5500 pins should be configured as GPIO's at initialization to save idle power ST-Ericsson ID: 408956 ST-Ericsson Linux next: NA ST-Ericsson FOSS-OUT ID: Trivial Signed-off-by: Vijaya Kumar Kilari <vijay.kilari@stericsson.com> Change-Id: I6198d52cc505938b5311fe333e6c14bed994e08f Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/45005 Reviewed-by: QATOOLS Reviewed-by: QABUILD Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-05-15 23:36:35 +0000