summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-10-31mac80211: fix two kernel-doc warningsmaster-2008-10-31Johannes Berg
One parameter wasn't described and one I forgot to update when renaming it; also update TBDs in sta_info. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31ath9k: use ETH_P_PAELuis R. Rodriguez
It was being discussed where we would put this, but now it found a home so use its define. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31ath9k: remove useless conditionalBob Copeland
ath9k_hw_keyreset returns true in either branch. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31orinoco: cache downloadable firmware image in memory for use during resumeAndrey Borzenkov
If card is using downloadable firmware (like Agere 9.x), firmware has to be reloaded during resume. It is not possible to use request_firmware for that, because tasks are still frozen, so request_firmware will just timeout and fail. So cache firmware image in memory for later reuse in ->resume method. Signed-off-by: Andrey Borzenkov <arvidjaar@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31orinoco: reload firmware on resumeAndrey Borzenkov
On resume card state is likely lost so we have to reload firmware again. Signed-off-by: Andrey Borzenkov <arvidjaar@mail.ru> Acked-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31ath5k: Update interrupt masking codeNick Kossifidis
*Properly get/set all available ISR/IMR values and review common/uncommon bits *Better handling of per-txq interrupts (we can now resolve what q is generating each interrupt -this will help in debuging wme later) *Some minor updates from legacy-hal *Properly handle RXNOFRM and TXNOFRM interrupt masking (even when we don't set them on IMR they keep showing up, so we disable them by zeroing AR5K_RXNOFRM and AR5K_TXNOFRM registers). This doesn't exist on legacy-hal but i've tested it on various cards and it works fine. Changes-Licensed-under: ISC Signed-Off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31wireless regulatory: move ignore_requestJohannes Berg
This function is only used once, move it closer to its caller. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31wireless: clean up regulatory ignore_request functionJohannes Berg
This function has a few WARNs that may eventually trigger when an AP sends rogue beacons, those must be removed. Some of the comments in the function are also inappropriate as this function is concerned with the global hint, not a per- wiphy thing (which a multidomain flag on a wiphy would imply). I'm convinced that we don't need to do anything to implement multi-domain capability as 802.11-2007 specifies it because it makes only two things mandatory: * starting of BSS/IBSS must have country information (this can easily be done with a mac80211 patch) * a STA must adopt the country information (we already have the framework for this) But we don't have anything implemented anyway for now. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31wireless: remove struct regdom hintingJohannes Berg
The code needs to be split out and cleaned up, so as a first step remove the capability, to add it back in a subsequent patch as a separate function. Also remove the publically facing return value of the function and the wiphy argument. A number of internal functions go from being generic helpers to just being used for alpha2 setting. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31wireless: make regdom passing semantics simplerJohannes Berg
The regdom struct is given to the core, so it might as well free it in error conditions. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31iwlwifi: Update reclaim flagDaniel Halperin
The reclaim flag should include REPLY_RX_MPDU_CMD in the list of commands issued by uCode. This is for safety in case the SEQ_RX_FRAME bit is set incorrectly. Signed-off-by: Daniel Halperin <daniel.c.halperin@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31iwl3945: iwl3945_mac_get_tsf() should not return zeroFabrice Bellet
The problem fixed here is that iwl3945_mac_get_tsf() returns 0, as the function is not implemented, and this is considered as a valid value by the mac layer in mlme.c:1605. The consequence is that the STA in ad-hoc mode is inserted/removed quite frequently due to IBSS merging. This patch fixes : http://www.intellinuxwireless.org/bugzilla/show_bug.cgi?id=1781 and https://bugzilla.redhat.com/show_bug.cgi?id=459401 Signed-off-by: Fabrice Bellet <fabrice@bellet.info> Acked-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31iwlwifi: run through spell checkerTomas Winkler
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31iwlwifi: refactor tx byte count table usageTomas Winkler
This patch drops unreadable usage of IWL_SET/GET_BITS16 in byte count tables handling This patch also cleans a bit the byte count table code and adds WARN_ON traps on invalid values This patch is pure cleanup, no functional changes. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31iwlwifi: clear scanning bits upon failureMohamed Abbas
In iwl_bg_request_scan function, if we could not send a scan command it will go to done. In done it does the right thing to call mac80211 with scan complete, but the problem is STATUS_SCAN_HW is still set causing any future scan to fail. Fix by clearing the scanning status bits if scan fails. Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31iwlwifi: convert correctly rate_n_flags to PLCP index for mimo3 packetsDaniel C. Halperin
The driver does not properly convert rate_n_flags to PLCP index for mimo3 packets. This makes mac80211 drop the packets Signed-off-by: Daniel C. Halperin <daniel.c.halperin@intel.com> Reviewed-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31iwlwifi: calibration command namespace renamingTomas Winkler
Since calibration framework is not HW specific remove 5000 and 4965 prefix This patch doesn't provide any functional changes only code renaming and movement Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31iwlwifi: parametrize eeprom versionsTomas Winkler
This patch uses new parameters eeprom_ver and eeprom_calib_ver to support additional HW. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31iwlwifi: don't update TFD free counter for invalid stationTomas Winkler
This patch makes sure that station table is not accessed with invalid station id in 4965 TX response path Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31iwlwifi: refactor TX response flowTomas Winkler
This patch utilize 5000 new TX response command which contains all necessary information and avoids back referencing to the original TX frame. It also change handling of software queue tracking 4965 flow is aligned with changes as much as possible. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31mac80211: Re-enable aggregationSujith
Wireless HW without any dedicated queues for aggregation do not need the ampdu_queues mechanism present right now in mac80211. Since mac80211 is still incomplete wrt TX MQ changes, do not allow aggregation sessions for drivers that set ampdu_queues. This is only an interim hack until Intel fixes the requeue issue. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: Luis Rodriguez <Luis.Rodriguez@Atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31mac80211: allow all interfaces types to handle RX action framesAndrey Yurovsky
Eliminate the vif.type check in ieee80211_rx_h_action. This check is unnecessary (these action frames can be handled by all interface types) and currently prevents, for example, AP interfaces from handling BACK action frames such as ADDBA and DELBA requests. Signed-off-by: Andrey Yurovsky <andrey@cozybit.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31wireless: remove write-only 'granted' variableJohannes Berg
Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31ath9k: Check if the STA supports HT when initializing rate controlSujith
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31mac80211: Change WARN_ON to WARN_ON_ONCESujith
A warning would be printed for every packet that is transmitted if the rate control information isn't setup. Change this to WARN_ON_ONCE. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31ath9k: Allow user to change tx power when askedLuis R. Rodriguez
We were also changing tx power even when we were not asked to, this enforces the change only when we are asked nicely. When not asked we simply try to use the max power, we don't tx power at all for rate control. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31ath9k: enable RX interrupt mitigationLuis R. Rodriguez
This enables hardware interrupt mitigation on RX. It should alleviate system interrupt load intelligently. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31ath9k: remove pointless sc_txintrperiod and spin_lock_bh on tx prepareLuis R. Rodriguez
sc_txintrperiod is currently set to 0 and never updated. We won't be using this, if anything we will consider using TX interrupt mitigation but that is different and not yet tested. So remove sc_txintrperiod and the pointless spin_lock_bh() on tx prepare. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31mac80211: make use of regulatory tx power settings on change of tx powerLuis R. Rodriguez
We do not know what max power to allow until a device is targeting a channel, therefore only allow changing tx power if a channel is defined. Also make use of the channel's max power setting as defined by regulatory rules before allowing the user to use the requested power setting. If the user asked us to figure it out we use the max allowed by regulatory. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31mac80211: check return value of dev_alloc_skb() in ieee80211_sta_join_ibss().Rami Rosen
This patch add a check on the return value of dev_alloc_skb() in ieee80211_sta_join_ibss() in net/mac80211/mlme.c. Signed-off-by: Rami Rosen <ramirose@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31wireless: avoid some net/ieee80211.h vs. linux/ieee80211.h conflictsJohn W. Linville
There is quite a lot of overlap in definitions between these headers... Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31wireless: use individual buffers for printing ssid valuesJohn W. Linville
Also change escape_ssid to print_ssid to match print_mac semantics. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31wireless: escape_ssid should handle non-printablesJohn W. Linville
Also use common backslash sequences like \t, \n, \r, and \\ as well as \0. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31wireless: remove NETWORK_EMPTY_ESSID flagJohn W. Linville
It is unnecessary and of questionable value. Also remove is_empty_ssid, as it is also unnecessary. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31wireless: consolidate on a single escape_essid implementationJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31mac80211: insert AP sta entry after filling itJohannes Berg
We never clearly defined the semantics of the sta_notify callback and it was originally posted for iwlwifi which still doesn't use it at all. With the recent HT rework ath9k started relying on it, but I made a mistake there in that I made ath9k assume the HT information has already been filled in at sta_notify time. This isn't a hard thing to do, so do it. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31Fix debugfs_create_*'s error checking method for wireless/rt2x00/Zhaolei
debugfs_create_*() returns NULL if an error occurs, returns -ENODEV when debugfs is not enabled in the kernel. Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31Fix debugfs_create_bool's error checking method for wireless/iwlwifi/Zhaolei
debugfs_create_bool() returns NULL if an error occurs, returns -ENODEV when debugfs is not enabled in the kernel. Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31wireless: fix EU checkJohannes Berg
http://en.wikipedia.org/wiki/De_Morgan%27s_laws is useful. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31wireless: get rid of pointless request listJohannes Berg
We really only need to know the last request at each point in time. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31wireless: remove cfg80211_reg_mutexJohannes Berg
This mutex is wrong, we use cfg80211_drv_mutex (which should possibly be renamed to just cfg80211_mutex) everywhere except in one place, fix that and get rid of the extra mutex. Also get rid of a spurious regulatory_requests list definition. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31wireless: don't publish __regulatory_hintJohannes Berg
This function requires an internal lock to be held, so it cannot be published to other modules in the kernel. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31mac80211: fix a few typos in mac80211 kernel docBob Copeland
Correct a handful of errors found while reading the mac80211 book. Signed-off-by: Bob Copeland <me@bobcopeland.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31rt2x00: reduce checkpatch.pl errorsJohn Daiker
A few changes to reduce checkpatch.pl errors in the rt2x00 driver. For the most part, I only fixed cosmetic things, and left the actual 'code flow' untouched (hopefully)! Diff is against wireless-testing HEAD. Signed-off-by: John Daiker <daikerjohn@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31ath5k: reduce checkpatch.pl errorsJohn Daiker
A few changes to reduce checkpatch.pl errors in the ath5k driver. For the most part, I only fixed cosmetic things, and left the actual 'code flow' untouched (hopefully)! Diff is against wireless-testing HEAD. Signed-off-by: John Daiker <daikerjohn@gmail.com> Reviewed-by: Bob Copeland <me@bobcopeland.com> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31Add nl80211 commands to get and set o11s mesh networking parameterscolin@cozybit.com
The two new commands are NL80211_CMD_GET_MESH_PARAMS and NL80211_CMD_SET_MESH_PARAMS. There is a new attribute enum, NL80211_ATTR_MESH_PARAMS, which enumerates the various mesh configuration parameters. Moved struct mesh_config from mac80211/ieee80211_i.h to net/cfg80211.h. nl80211_get_mesh_params and nl80211_set_mesh_params unpack the netlink messages and ask the driver to get or set the configuration. This is done via two new function stubs, get_mesh_params and set_mesh_params, in struct cfg80211_ops. Signed-off-by: Colin McCabe <colin@cozybit.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31mac80211: inform userspace of probe/auth/assoc timeoutJohannes Berg
I noticed that when for some reason [1] the probe or auth times out, wpa_supplicant doesn't realise this and only tries the next AP when it runs into its own timeout, which is ten seconds, and that's quite long. Fix this by making mac80211 notify userspace that it didn't associate. [1] my wrt350n in mixed B/G/HT mode often runs into this, maybe it's because one of the antennas is broken off and for whatever reason it decides to use that antenna to transmit the response frames (auth, probe); I do see beacons fine so it's not totally broken. Works fine in pure-G mode. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31hostap: Fix sparse warningsLarry Finger
A compilation with the command "make C=2 CF="-D__CHECK_ENDIAN__" \ drivers/net/wireless/hostap/" yields the following warnings: CHECK drivers/net/wireless/hostap/hostap_info.c drivers/net/wireless/hostap/hostap_info.c:156:43: warning: incorrect type in argument 2 (different signedness) drivers/net/wireless/hostap/hostap_info.c:156:43: expected unsigned long volatile *addr drivers/net/wireless/hostap/hostap_info.c:156:43: got long *<noident> drivers/net/wireless/hostap/hostap_info.c:294:44: warning: incorrect type in argument 2 (different signedness) drivers/net/wireless/hostap/hostap_info.c:294:44: expected unsigned long volatile *addr drivers/net/wireless/hostap/hostap_info.c:294:44: got long *<noident> drivers/net/wireless/hostap/hostap_info.c:487:12: warning: incorrect type in argument 2 (different signedness) drivers/net/wireless/hostap/hostap_info.c:487:12: expected unsigned long volatile *addr drivers/net/wireless/hostap/hostap_info.c:487:12: got long *<noident> drivers/net/wireless/hostap/hostap_info.c:491:12: warning: incorrect type in argument 2 (different signedness) drivers/net/wireless/hostap/hostap_info.c:491:12: expected unsigned long volatile *addr drivers/net/wireless/hostap/hostap_info.c:491:12: got long *<noident> The warnings are fixed with the following compile-tested fix: Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Acked-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31mac80211: remove rate_control_clearJohannes Berg
"Clearing" the rate control algorithm is pointless, none of the algorithms actually uses this operation and it's not even invoked properly for all channel switching. Also, there's no need to since rate control algorithms work per station. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31iwlwifi: protect headers from double inclusionTomas Winkler
This patch protects iwl-csr.h and iwl-fh.h from double inclusion by ifndef define endif idiom Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-05-31 01:05:50 +0000