summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-12-12iwlwifi: add contact email to MODULE_AUTHORmaster-2008-12-12Tomas Winkler
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12iwlwifi: remove 4965 from common uCode API structuresTomas Winkler
This patch removes 4965 from common uCode API structures. Also updates iwlagn commands with 3945 specific RX command in preparation for 3945 port. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12iwlwifi: remove includes of iwl-helpers.h where not neededTomas Winkler
This patch removes includes of iwl-helpers.h where not needed Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12iwlwifi: remove unused clip_groups priv memberTomas Winkler
Remove clip_groups from priv and related structure. This code is for 3945 only and was renamed to 4965 in when code was split. Also remove unused RATE definitions Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12iwlwifi: fix resume while txpower offMohamed Abbas
This patch take care of coming out rfkill when the driver is up while rfkill is on by restarting interface. Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12iwlwifi: use iwl_poll_direct_bit in EEPROM readingZhu, Yi
The patch replaces the current reading EEPROM loop iterations with iwl_poll_direct_bit(). It also fixes some comment error. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12ath9k: Do not remove header padding on RX from short framesJouni Malinen
The 802.11 header is only padded to 32-bit boundary when the frame has a non-zero length payload. In other words, control frames (e.g., ACK) do not have a padding and we should not try to remove it. This fixes monitor mode for short control frames. In addition, the hdrlen&3 use is described in more detail to make it easier to understand how the padding length is calculated. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12iwlwifi: fix build warning (iwl-rx.c)Rami Rosen
This patch fixes the following build warning when CONFIG_IWLWIFI_DEBUG is not set. /work/src/wireless-testing/drivers/net/wireless/iwlwifi/iwl-rx.c:758: warning: 'iwl_dbg_report_frame' defined but not used Signed-off-by: Rami Rosen <ramirose@gmail.com> Acked-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12mac80211: misc cleanupsRami Rosen
This patch removes unneeded member (skbuff) from ieee80211_ibss_add_sta() method in its declaration (in ieee80211_i.h) and its callers (in rx.c and mlme.c) This patch removes unneeded member from struct ieee80211_rx_data in ieee80211_i.h. (Originally posted as two patches. -- JWL) Signed-off-by: Rami Rosen <ramirose@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12rfkill: strip pointless notifier chainJohannes Berg
No users, so no reason to have it. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12libertas: Create sysfs entry for changing the mesh probe response limitAnna Neal
This patch adds the ability to change the number of probe response retries sent by the mesh interface. In dense networks it is recommended to change this value to zero to reduce traffic congestion. Signed-off-by: Anna Neal <anna@cozybit.com> Signed-off-by: Andrey Yurovsky <andrey@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12ath9k: Refactor struct ath_softcSujith
Split ath_softc into smaller structures for rx, tx and beacon handling. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12p54: fix oops on faulty devicesChristian Lamparter
This patch fixes an oops when the devices suddenly starts to receive martian data frames. bug reference: http://marc.info/?l=linux-wireless&m=122872280317635&w=2 Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12mac80211: Disable requests for new scans in AP modeJouni Malinen
AP mode operations are seriously affected if mac80211 runs through a multi-second scan while the AP is trying to send Beacon frames on the operation channel. While this could be implemented in a way that does not cause too many problems, it is not very simple and will require synchronization with Beacon frame scheduling in the drivers (scan one channel at a time between Beacon frames). Furthermore, such scanning takes quite a bit longer time and existing userspace applications would be likely to timeout while waiting for the results. For now, just refuse requests for new scans (SIOCSIWSCAN) when in AP mode. In practice, this moves the rejection from iwl* drivers into mac80211 to make it apply to every mac80211-based driver. This issue shows up in associated stations getting disconnected when something (e.g., Network Manager) requests a scan while the interface is in AP mode. When doing this continuously (e.g., NM does it every 120 seconds), the network gets close to useless. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12ipw2200: fix scanning while associatedHelmut Schaa
This patch fixes sporadic firmware restarts when scanning while associated. The firmware will quietly cancel a scan (while associated) if the dwell time for a channel to be scanned is larger than the time it may stay away from the operating channel (because of DTIM catching). Unfortunately the driver is not notified about the canceled scan and therefore the scan watchdog timeout will be hit and the driver causes a firmware restart which results in disassociation. This mainly happens on passive channels which use a dwell time of 120 whereas a typical beacon interval is around 100. The patch changes the dwell time for passive channels to be slightly smaller than the actual beacon interval to work around the firmware issue. Furthermore the number of allowed beacon misses is increased from one to three as otherwise most scans (while associated) won't complete successfully. However scanning while associated will still fail in corner cases such as a beacon intervals below 30. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12b43legacy: Fix sparse warningsLarry Finger
Sparse yields the following warnings for b43legacy: CHECK drivers/net/wireless/b43legacy/phy.c drivers/net/wireless/b43legacy/phy.c:1304:31: warning: potentially expensive pointer subtraction drivers/net/wireless/b43legacy/phy.c:1304:31: warning: potentially expensive pointer subtraction drivers/net/wireless/b43legacy/phy.c:1304:31: warning: potentially expensive pointer subtraction CHECK drivers/net/wireless/b43legacy/debugfs.c drivers/net/wireless/b43legacy/debugfs.c:243:9: warning: memset with byte count of 131072 Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12rtl8187: Use usb anchor facilities to manage urbsLarry Finger
When SLUB debugging is enabled in the kernel, and the boot command includes the option "slub_debug=P", rtl8187 encounters a GPF due to a read-after-free of a urb. Following the example of changes in p54usb to fix the same problem, the code has been modified to use the usb_anchor_urb() method. With this change, the USB core handles the freeing of urb's. This patch fixes the problem reported in Kernel Bugzilla #12185 (http://bugzilla.kernel.org/show_bug.cgi?id=12185). Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Tested-by: Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12ath5k: fix endianness of bitwise ops when installing micBob Copeland
Fix these bugs found by sparse: ath5k/pcu.c:1102:21: warning: restricted __le32 degrades to integer ath5k/pcu.c:1102:13: warning: incorrect type in assignment (different base types) ath5k/pcu.c:1102:13: expected restricted __le32 <noident> ath5k/pcu.c:1102:13: got unsigned int ath5k/pcu.c:1104:20: warning: restricted __le32 degrades to integer ath5k/pcu.c:1104:13: warning: incorrect type in assignment (different base types) ath5k/pcu.c:1104:13: expected restricted __le32 <noident> ath5k/pcu.c:1104:13: got unsigned int Changes-licensed-under: ISC Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12spectrum_cs: Fix function names used in debug stringsDavid Kilroy
Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12orinoco: Fix inappropriate use of IRQ_BAPDavid Kilroy
This hardware buffer should only be used from an interrupt. The wireless event generation functions are called from a workqueue, so use USER_BAP instead. Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12orinoco: Fix function names used in debug stringsDavid Kilroy
Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12p54: enforce strict tx_queue limitsChristian Lamparter
The patch fixes an old FIXME in p54pci.c by moving the "queue full" check into the common library, where we can deal with it properly. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12iwlwifi: remove qos module parameterWinkler, Tomas
The ability of disabling qos from module params is not required anymore. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12iwlwifi: 3945 remove qos module parameterWinkler, Tomas
The ability of disabling qos from module params is not required anymore. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12iwlifi: remove twice defined SINGLE_FRAME RX FH MASKWinkler, Tomas
This patch removes second definition of FH_RCSR_CHNL0_RX_CONFIG_SINGLE_FRAME in iwl-fh.h Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Reported-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Acked-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12iwlwifi: change email contact informationWinkler, Tomas
This patch replaces personal emails with hopefully always valid Intel Linux Wireless, which will be routed to a current maintainer Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12airport: remove useless return in a function returning voidPavel Roskin
Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12mac80211: integrate sta_notify_ps cmds into sta_notifyChristian Lamparter
This patch replaces the newly introduced sta_notify_ps function, which can be used to notify the driver about every power state transition for all associated stations, by integrating its functionality back into the original sta_notify callback. Signed-off-by: Christian Lamparter <chunkeey@web.de> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12p54usb: rewriting rx/tx routines to make use of usb_anchor's facilitiesChristian Lamparter
Alan Stern found several flaws in p54usb's implementation and annotated: "usb_kill_urb() and similar routines do not expect an URB's completion routine to deallocate it.  This is almost obvious -- if the URB is deallocated before the completion routine returns then there's no way for usb_kill_urb to detect when the URB actually is complete." This patch addresses all known limitations in the old implementation and fixes khub's "use-after-freed" hang, when SLUB debug's poisoning option is enabled. Signed-off-by: Christian Lamparter <chunkeey@web.de> Cc: stable@kernel.org Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12ath9k: BH shouldn't be enabled when hardirqs are disabled.Senthil Balasubramanian
ath_tx_complete_buf uses a BH version of spinlock and so releasing the lock enables BH which is incorrect when called from sta_notify callback as MAC80211 disables hardirqs before the driver callback is called. As ath_tx_complete_buf is shared between user and softirq context using normal spinlock may not be appropriate. Though the proper fix would be to cleanup the context properly in the driver code, this would be an interim fix to avoid kernel warning. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12mac80211/cfg80211: check endianness in sparse runsJohannes Berg
Make sure sparse checks endianness when run on mac80211/cfg80211. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12mac80211: remove fragmentation offload functionalityJohannes Berg
There's no driver that actually does fragmentation on the device, and the callback is buggy (when it returns an error, mac80211's fragmentation status is changed so reading the frag threshold from userspace reads the new value despite the error). Let's just remove it, if we really find some hardware supporting it we can add it back later. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12ath9k: remove fragmentation workaround againJohannes Berg
Looking at the RC algorithm this is no longer necessary. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12iwlwifi: fix build error (iwl-rx.c).Rami Rosen
This patch adds #ifdef CONFIG_IWLWIFI_DEBUG in iwl_rx_reply_rx() method in iwlwifi/iwl-rx.c) to avoid build error caused by "iwlwifi: implement iwl_debug_report_frame for iwlagn". Signed-off-by: Rami Rosen <ramirose@gmail.com> Acked-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12mac80211: only create default STA interface if supportedJohannes Berg
Drivers will support this, obviously, but this forces them to set it up properly. (This includes the fix posted as "mac80211: fix ifmodes check" and tested in wireless-testing by Hin-Tak and others. -- JWL) Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Reported-by: Larry Finger <Larry.Finger@lwfinger.net> Tested-by: Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12ieee80211_security: correct warning about width of auth_modeJohn W. Linville
Also remove auth_algo which is unused. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12ath9k: avoid rx frames with corrupted descriptor.Senthil Balasubramanian
Setting RX_ABORT/RX_DIS after MAC reset and clearing RX_ABORT/RX_DIS after enbling RXE/RXDP to avoid rx frames with corrupted descriptor status. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12ath9k: Incorrect band enum causes invalid antenna configuration.Senthil Balasubramanian
It's a regression from the patch titled "ath9k: Use mac80211's band macros and remove enum hal_freq_band". MAC80211 band macros can't be mapped directly with our hal band enum. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12ath9k: Adding support for Atheros AR9285 chipset.Senthil Balasubramanian
Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12ath9k: Adding initvalues for Atheros AR9285 chipset.Senthil Balasubramanian
This patch adds the initvalues required for AR9285 chipset. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12ath9k: Adding AR9285 chipset register information.Senthil Balasubramanian
Adding AR9285 register information. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12cfg80211: fix nl80211 frequency handlingJohannes Berg
Fix two small bugs with HT frequency setting: * HT is accepted even when the driver is incapable * HT40 is accepted when the driver cannot do 40 MHz (both on the selected band) Also simplify the code a little. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12mac80211: improve sta_notify documentationJohannes Berg
Mention more possible STA entries and document the atomic requirement. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12ath9k: Merge structures ath_atx, ath_node_aggr with ath_nodeSujith
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12ath9k: Remove remaining occurrences of CONFIG_SLOW_ANT_DIVSujith
Slow Antenna Diversity has been removed, these are remnants of the old code. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12ath9k: Add a debugfs file to show interrupt statisticsSujith
Location: ath9k/<phy>/interrupt Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12ath9k: Maintain rate table choice after associationSujith
A scan run after association would change sc_curmode which is used to get the current rate table. This patch fixes it by removing sc_curmode and setting the rate table in usage in cur_rate_table on association. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12ath9k: Fix bug in rate table managementSujith
The proper rate table wouldn't be used if a disassoc happens and a new attempt is made to associate using wpa_supplicant. This patch fixes it by storing the rate table to be used on association. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12ath9k: Disable staggered Beacon frame schedulingJouni Malinen
It looks like there are some issues in the current ath9k version as far as staggered Beacon frame scheduling is concerned. This results in Beacon frame timestamp being off by 25 milliseconds or so which can cause issues with multicast power save buffering in AP mode. Some client stations fail to receive multicast frames when there is this large an offset between TBTT and actual Beacon transmission time. Since ath9k does not yet support multiple BSSes anyway, the staggered Beacon frame scheduling is just increasing the number of interrupts at this point. The easiest fix for the timestamp offset is to disable staggered Beacon frames for now. We need to redesign beacon.c anyway when adding multi-BSS support with mac80211 since the existing code depends on different mechanism for Beacon frame transmission. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12ath9k: Free Beacon skbs in AP modeJouni Malinen
Fix a memory leak where AP mode did not free transmitted Beacon frame skbs. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Acked-by: Pat Erley <pat-lkml@erley.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>