summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-07-24mac80211: Fix regression in mesh forwarding path.master-2009-07-24Javier Cardona
The removal of the master netdev broke the mesh forwarding path. This patch fixes it by using the new internal 'pending' queue. As a result of this change, mesh forwarding no longer does the inefficient 802.11 -> 802.3 -> 802.11 conversion that was done before. [Changes since v1] Suggested by Johannes: - Select queue before adding to mpath queue - ieee80211_add_pending_skb -> ieee80211_add_pending_skbs - Remove unnecessary header wme.h Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: Andrey Yurovsky <andrey@cozybit.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24mac80211: fix ieee80211_xmit call contextJohannes Berg
ieee80211_xmit() cannot be called with tasklets enabled because it is normally called from within a tasklet. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24net: remove unused skb->do_not_encryptJohannes Berg
mac80211 required this due to the master netdev, but now it can put all information into skb->cb and this can go. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24mac80211: remove master netdevJohannes Berg
With the internal 'pending' queue system in place, we can simply put packets there instead of pushing them off to the master dev, getting rid of the master interface completely. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24net: export __dev_addr_sync/__dev_addr_unsyncJohannes Berg
For mac80211, with the master netdev removal, we need to be able to sync a multicast address list onto another list that is not tracked within a netdev, so we need access to the functions doing that. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24adm8211: remove uneeded code during suspend/resumeLuis R. Rodriguez
mac80211 drivers do not need to stop the software queues or call their own stop() callback upon suspend as we do it for drivers. Equally drivers don't have to call their own start() or start the queues as mac80211 will do it for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24ath9k: do not stop the queues in driver stopLuis R. Rodriguez
mac80211 will have disabled the queues for us when needed. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24MAINTAINERS: Update rtl8180 patternsJoe Perches
rtl8180 files were moved into a subdirectory by commit 1c740ed2210a0d124674a477ea538468aba47810 Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24MAINTAINERS: add wl1251 wireless driverKalle Valo
Add myself as the maintainer for wl1251 driver. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24wl1251: remove wl1251_plt_start/stop()Kalle Valo
This Production Line Testing code is currently unused and can be removed. It can be reintroduced when nl80211 test mode implemented for the driver. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24wl1251: remove accidentally added wl1251_netlink.cKalle Valo
Commit "wl1251: add wl1251 prefix to all 1251 files" accidentally added wl1251_netlink.c which contains a private netlink interface. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24ath5k: fix values for bus error bits in ISR2Pavel Roskin
The new values are taken from the recently open sourced Atheros HAL. Correctness is also confirmed by the users with access to Atheros documentation. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24cfg80211: avoid setting default_key if add_key failsZhu Yi
In cfg80211_upload_connect_keys(), we call add_key, set_default_key and set_default_mgmt_key (if applicable) one by one. If one of these operations fails, we should stop calling the following functions. Because if the key is not added successfully, we should not set it as default key anyway. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwmc3200wifi: fix a use-after-free bugZhu Yi
The patch fixes a use-after-free bug for cmd->seq_num; Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwmc3200wifi: fix cfg80211_connect_result is called in IBSSZhu Yi
Avoid calling cfg80211_connect_result() in IBSS mode. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwmc3200wifi: use cfg80211_connect_result to send req/resp IEZhu Yi
cfg80211_connect_result() let us specify associate request and response IEs as parameters after we are connected. We use this capability instead of doing it ourselves with WEXT. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24cfg80211: fix typo of IWEVASSOCRESPIEZhu Yi
It should be IWEVASSOCREQIE instead. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24cfg80211: set_default_key only for WEPZhu Yi
We invoke the cfg80211 set_default_key callback only for WEP key configuring. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24p54: Eliminate unnecessary initializationLarry Finger
In two places, variables are unnecessilarly initialized to NULL. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24mac80211: fix spare warnings in driver-trace.hChristian Lamparter
This patch fixes the following errors: driver-trace.h:148:1: error: cannot size expression driver-trace.h:148:1: error: cannot size expression [...] driver-trace.h:222:1: error: cannot size expression driver-trace.h:71:1: error: incompatible types for operation (<) driver-trace.h:71:1: left side has type void *<noident> driver-trace.h:71:1: right side has type int driver-trace.h:99:1: error: incompatible types for operation (<) driver-trace.h:99:1: left side has type void *<noident> driver-trace.h:99:1: right side has type int driver-trace.h:148:1: error: incompatible types for operation (<) driver-trace.h:148:1: left side has type void *<noident> driver-trace.h:148:1: right side has type int driver-trace.h:222:1: error: cannot size expression driver-trace.h:248:1: error: incompatible types for operation (<) driver-trace.h:248:1: left side has type void *<noident> driver-trace.h:248:1: right side has type int driver-trace.h:446:1: error: incompatible types for operation (<) driver-trace.h:446:1: left side has type void *<noident> driver-trace.h:446:1: right side has type int Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24mac80211: do not monitor the connection while scanningChristian Lamparter
mac80211 constantly monitors the connection to the associated AP in order to check if it is out of reach/dead. This is absolutely fine most of the time. Except when there is a scheduled scan for the whole neighborhood. After all this path could trigger while scanning on different channel. Or even worse: this AP probing triggers a WARN_ON in rate_lowest_index when the scan code did a band transition! ( http://www.kerneloops.org/raw.php?rawid=449304 ) Reported-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Christian Lamparter <chunkeey@web.de> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24arlan: inverted logic?Roel Kluin
Inverted logic Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24ath9k: make use ath9k_hw_wait int ath9k_hw_reset_tsfGabor Juhos
We have a dedicated function for this kind of checks, use that instead of duplicating the code. Changes-licensed-under: ISC Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24ath9k: wake up the chip for TSF resetGabor Juhos
If we are in NETWORK SLEEP state, AR_SLP32_TSF_WRITE_STATUS limit always exceeds in 'ath9k_hw_reset_tsf', because reading of the AR_SLP3 register always return with the magic 0xdeadbeef value. Changes-licensed-under: ISC Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24wl12xx: fix spellingStefan Weil
Changes (comments and debug output): * couldnt -> couldn't * frmware -> firmware * recevied -> received Signed-off-by: Stefan Weil <weil@mail.berlios.de> Acked-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24rt2x00: Comment spellcheckingLuis Correia
Fix a bunch of spelling errors in the rt2x00 drivers Signed-off-by: Luis Correia <luis.f.correia@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwlwifi: change iwl_enable/disable_interrupts to "inline"Wey-Yi Guy
iwl_enable_interrupts is being called inside the interrupt, change from function call to inline Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwlwifi: inform user about rfkill state changesReinette Chatre
rfkill state changes are mostly available through debug messages. These are significant enough to always make user aware of so we turn them into warnings. Also insert a missing newline in some rfkill related debug message. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwlwifi: clarify hardware error messageReinette Chatre
When a hardware error is detected we need to be clear about that and not create impression that the microcode is able to deal with it. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwlwifi: make debug level more user friendlyReinette Chatre
* Deprecate the "debug50" module parameter used to obtain 5000 series and up debugging. Replace it with "debug" module parameter to match with original driver and be consistent between them. The "debug50" module parameter can still be used, except that the module parameter is not writable in keeping with its previous state. We currently just mark it as "deprecated" and do not have it in the feature-removal-schedule. Some more cleanup of module parameters needs to be done and can then be entered together. * Only make "debug" module parameters visible if the driver is compiled with CONFIG_IWLWIFI_DEBUG. This will eliminate a lot of confusion where users think they have set debug flags but yet cannot see any debug output. * Make module parameters writable. This eliminates the need for the "debug_level" sysfs file, which can now also be deprecated and added to feature-removal-schedule. This file is in significant use though with many iwlwifi documents and text referring users to it. We can thus not take its removal lightly and keep it around. With iwlcore shared between iwlagn and iwl3945 we really do not need debug module parameters for each but can instead have one debug module parameter for the iwlcore module. The same issue is here as with the sysfs file - a lot of iwlwifi documentation and text (like bug reports) rely on iwlagn and iwl3945 having this module parameter, so changing this to a module parameter of iwlcore will have significant impact and we do not do this for that reason. One consequence of this patch is that if a user is running a system with both 3945 and later hardware then the setting of the one module parameter will affect the value of the other. The likelihood of this seems low - and even if this setup is present it does not seem like an issue for both modules to run with the same debug level. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwlwifi: uCode Alive notification with timeoutWey-Yi Guy
Wait for REPLY_ALIVE notification from init and runtime uCode. based on the type of REPLY_ALIVE, different status bit will be set to wake up the queue: STATUS_INIT_UCODE_ALIVE for init uCode STATUS_RT_UCODE_ALIVE for runtime uCode. If timeout, attempt to download the failing uCode image again. This can only be done for the init ucode images of all iwlagn devices and the runtime ucode image of the 5000 series and up. If there is a problem with the 4965 runtime ucode coming up we restart the interface and thus trigger a new download of the init ucode also. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwlwifi: update 1000 series API version to match firmwareJay Sternberg
firmware file now contains build number so API needs to be updated. Signed-off-by: Jay Sternberg <jay.e.sternberg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwlwifi: checking unknown HW typeWey-Yi Guy
When deciding NVM type, if the HW type is unknown, report error and exit with -ENOENT. This check should prevent incorrect behavior by assuming the wrong NVM type. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwlwifi: Led blinking counting both tx and rxWey-Yi Guy
For controlling led blinking, counting both tx and rx data traffic; this will be able to handle traffic in either direction Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwlwifi: add led debugfs functionWey-Yi Guy
Adding debugfs file to show current led blinking rate /sys/kernel/debug/ieee80211/phy0/iwlagn/data/led Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwlagn: do not send key clear commands when rfkill enabledReinette Chatre
Do all key clearing except sending sommands to device when rfkill enabled. When rfkill enabled the interface is brought down and will be brought back up correctly after rfkill is enabled again. Same change is not needed for iwl3945 as it ignores return code when sending key clearing command to device. This fixes http://bugzilla.kernel.org/show_bug.cgi?id=13742 Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Tested-by: Frans Pop <elendil@planet.nl> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwlwifi: make led functions genericWey-Yi Guy
Led functions are generic for all the devices except 3945, so remove the reference to 4965 Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwlwifi: Handle new firmware file with ucode build number in headerJay Sternberg
Adding new API version to account for change to ucode file format. New header includes the build number of the ucode. This build number is the SVN revision thus allowing for exact correlation to the code that generated it. The header adds the build number so that older ucode images can also be enhanced to include the build in the future. some cleanup in iwl_read_ucode needed to ensure old header not used and reduce unnecessary references through pointer with the data is already in heap variable. Signed-off-by: Jay Sternberg <jay.e.sternberg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwlwifi: fix rx signal quality reporting in dmesgWey-Yi Guy
Fix quality incorrectly reported as signal strength value. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwlagn: modify digital SVR for 1000Wey-Yi Guy
On 1000, there are two Switching Voltage Regulators (SVR). The first one apply digital voltage level (1.32V) for PCIe block and core. We need to use this regulator to solve a stability issue related to noisy DC2DC line in the silicon. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24p54: fix a fw crash caused by statistic feedbackChristian Lamparter
This patch fixes a bug which crawled into the tree with the split-up changes. The memory-manager wasn't aware of the statistic feedback extra_len space requirements and happily placed following frames into the allegedly free spots. Thanks fly out to Larry Finger for taking the time to test all (permutations of) patches and theories all day long. Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Christian Lamparter <chunkeey@web.de> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24p54: fix beaconing related firmware crashChristian Lamparter
This patch fixes a firmware crash which can be provoked by changing operation mode. Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Christian Lamparter <chunkeey@web.de> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24p54: remove useless codeChristian Lamparter
This patch removes some useless checks in recv/xmit code. Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24cfg80211: don't optimise wext calls too muchJohannes Berg
In the wext code I tried to not reconnect all the time when the user wasn't really sure what they were doing, like setting the BSSID back to the same value it was. However, this optimisation should only be done while associated so that setting the BSSID back to the same value that it was actually triggers a new association if not currently associated. To achieve, that, put the relevant code into the !IDLE case instead. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Tested-by: Kalle Valo <kalle.valo@iki.fi> Tested-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24cfg80211: remove WARN_ON in __cfg80211_sme_scan_doneZhu Yi
cfg80211_sme_scan_done() can be called (by fullmac cards) with wdev->conn == NULL when CFG80211_SME_CONNECTING. We quit silently instead of WARN_ON in this case. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwmc3200wifi: remove key caches in driverZhu Yi
cfg80211 now guarantees keys are set after connecting. We can remove the key cache code from the driver now. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwmc3200wifi: make iwm_send_wifi_if_cmd return 0 on successZhu Yi
We used to return the result of wait_event_interruptible_timeout() which is the remaining timeout on success. But this information is not used by any of its callers. So we just return 0 on success. This fixed a erroneous return value bug for iwm_set_key(). Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwmc3200wifi: remove setting WEP keys before setting essid supportZhu Yi
The recent cfg80211 "rework key operation" patch from Johannes Berg makes sure keys are set only after the connection has been established. So we can remove the setting WEP keys before essid support from the driver. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwmc3200wifi: cfg80211 managed mode portSamuel Ortiz
This patch ports iwmc3200wifi to the cfg80211 managed mode API. Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwmc3200wifi: use correct debug levelZhu Yi
This patch uses TX and RX instead of NTF debug levels in some hot paths. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-06-04 21:53:25 +0000