summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-03-15rt2x00: fix warning when building rt2800pci with just soc supportmaster-2010-03-15Helmut Schaa
Fix compile warning "rt2800pci.c:1248: warning: 'rt2800pci_device_table' defined but not used" when building rt2800pci with only soc support (without pci). Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-15ipw2x00: replace "ieee80211" with "libipw" where appropriatePavel Roskin
"ieee80211" was the old name of the common library for ipw2100 and ipw2200. It was renamed to "libipw", but some occurrences of the old name remained. Rename alloc_ieee80211() to alloc_libipw() and free_ieee80211() to free_libipw(). Adjust comments and label names. Change prefixes in diagnostic messages. Keep /proc/net/ieee80211 under the original name to avoid breaking user interface. Move the affected EXPORT_SYMBOL macros to their proper places. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-15orinoco: disable support for prism chipset by defaultPavel Roskin
The hostap driver provides better support for Prism chipset. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-15wl1251: reduce eeprom read wait timeGrazvydas Ignotas
4sec wait is way too pessimistic, TI driver uses 40ms here, and testing shows that is ebough, so let's also use that. While at it, add useful sounding comment from the TI driver. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Acked-by: Kalle Valo <kalle.valo@iki.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-15wl1251: fix ELP_CTRL register accesses when using SDIOGrazvydas Ignotas
For some unknown reason ELP_CTRL can't be accesed using sdio_memcpy_* functions (any attemts to do so result in timeouts): wl1251: ERROR sdio write failed (-110) wl1251: ERROR sdio read failed (-110) wl1251: WARNING WLAN not ready To fix this, add special IO functions for ELP_CTRL access that are using sdio_readb/sdio_writeb. Similar handling is done in TI reference driver from Android code drop. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Cc: Bob Copeland <me@bobcopeland.com> Acked-by: Kalle Valo <kalle.valo@iki.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-15wl1251: make local symbols staticGrazvydas Ignotas
Make local functions and data static, also constify some structures. While at it, clean up unneeded includes. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Cc: Bob Copeland <me@bobcopeland.com> Acked-by: Kalle Valo <kalle.valo@iki.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-15mac80211: optimize tx status processingFelix Fietkau
When a cooked monitor interface is active, ieee80211_tx_status() generates a radiotap header for every single frame, even if it wasn't injected and thus won't be sent to a monitor interface. This patch reduces cpu utilization by moving the cooked monitor check a bit earlier, before it generates the rtap header. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-15DRIVER: Libertas: Fixed coding style in rx.cStewart Malik
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-15ath5k: remove unused beacon timer codeJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-15ath5k: remove dead source in ath5k_combine_linear_pcdac_curvesJohn W. Linville
This code was commented-out when it was added about a year ago and remains unchanged -- seems as if we don't need it... Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-15ath5k: remove some dead functionsJohn W. Linville
"ath5k: remove stale function declarations, make some functions static" commented-out some unused functions. This removes them. Signed-off-by: John W. Linville <linville@tuxdriver.com> Acked-by: Bob Copeland <me@bobcopeland.com>
2010-03-15airo : Print of firmware versionmatthieu castet
For the firmware version 5.30.17 the log file shows: Firmware version 5.30.11 The variable softSubVer is binary. Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr> Signed-off-by: Jose Alonso <joalonsof@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-15airo : fix printing status infomatthieu castet
For some status, reason is encoded in the low byte, but airo_print_status forgot tp mask low byte in status parsing. This make it only work when reason is 0. Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10ssb: Export ssb_chipco_gpio_control - needed by N PHY codemaster-2010-03-10Larry Finger
The latest changes in the N PHY core require the symbol ssb_chipco_gpio_control to be exported. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10ath5k: fixing retries in ath5k_hw_setup_4word_tx_descAndrew Blaich
The rate control algorithm, default is Minstrel for ath5k, determines the number of retries to use for each rate. However, there exists in ath5k_hw_setup_4word_tx_desc (which is called for AR5212 like devices) a set number of retries defined by AR5K_TUNE_HWTXTRIES. The set number of tries is added to the tx_tries0 variable setup by the rate control algorithm. This changes the number of retries the rate control algorithm considers necessary. By removing the AR5K_TUNE_HWTXTRIES from the retry calculation the rate control algorithm is given control over the number of retries. Signed-off-by: Andrew Blaich <ablaich@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10ath9k: fix rate control tx status handling for A-MPDUFelix Fietkau
Currently the rate control tx status update gets called for every subframe of an A-MPDU, and ath9k marks the frame with the relevant status update with an internal flag. This not suitable for rate control algorithms using the standard mac80211 rate control API, so fix this by using IEEE80211_TX_STAT_AMPDU for marking the correct frames that should be processed. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10wl1271: Changed wl1271_sdio to be selectable only on ARMTeemu Paasikivi
As wl1271_sdio implementation depends on ARM GPIO impelementation it is not directly usable on other architectures at the moment. Added ARM dependency to kernel configuration option. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10ath5k: Minor EEPROM documentation updatesBruno Randolf
Here are some minor updates for EEPROM, mostly documentation and some small fixes which have no effect at the moment. - fixed_bias is not available for B mode. - AR5K_EEPROM_[RT]X_CHAIN_DIS is 3 bit. this is MIMO and will not be used in ath5k, but just to be correct. - AR5K_EEPROM_JAP_MID_EN added, and shift of following flags adapted. - added some documentation for EEPROM values and some comments. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10ath5k: IQ calibration for AR5211 is slightly differentBruno Randolf
according to the HAL sources the calculation of the Q value is slightly different for AR5211 chips. i couldn't test this since IQ calibration never finishes on older parts. this is a different problem... Signed-off-by: Bruno Randolf <br1@einfach.org> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10ath5k: add debugfs file frameerrorsBruno Randolf
add a debugfs file to see different RX and TX errors as reported in our status descriptors. this can help to diagnose driver problems. statistics can be cleared by writing 'clear' into the frameerrors file. example: # cat /sys/kernel/debug/ath5k/phy0/frameerrors RX --------------------- CRC 27 (11%) PHY 3 (1%) FIFO 0 (0%) decrypt 0 (0%) MIC 0 (0%) process 0 (0%) jumbo 0 (0%) [RX all 245] TX --------------------- retry 2 (9%) FIFO 0 (0%) filter 0 (0%) [TX all 21] Signed-off-by: Bruno Randolf <br1@einfach.org> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10ath5k: remove ah_gpio_npinsBruno Randolf
it's never used and we have a newer implementation in gpio.c. Signed-off-by: Bruno Randolf <br1@einfach.org> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10ath5k: remove ah_mac_revisionBruno Randolf
it's not used, and we have ah_mac_srev. Signed-off-by: Bruno Randolf <br1@einfach.org> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10ath5k: remove ah_magicBruno Randolf
it's never used. probably a leftover from the old OpenHAL days... Signed-off-by: Bruno Randolf <br1@einfach.org> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10ath5k: remove double opmode definitionBruno Randolf
opmode (operating mode) was defined in struct ath5k_hw and struct ath5k_softc. remove it from ath5k_hw and use only from ath5k_softc (sc->opmode). (btw: what's the meaning of opmode when we have multiple interfaces?) Signed-off-by: Bruno Randolf <br1@einfach.org> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10ath5k: preserve antenna settingsBruno Randolf
save antenna settings and preserve across resets. Signed-off-by: Bruno Randolf <br1@einfach.org> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10ath5k: add antenna statistics and debugfs file for antenna settingsBruno Randolf
keep statistics about which antenna was used for TX and RX. this is used only for debugging right now, but might have other applications later. add a new file 'antenna' in debugfs (/sys/kernel/debug/ath5k/phy0/antenna) to show antenna use statistics and antenna diversity related register values. it can also be used to set the antenna mode until we have proper support for that in iw: - echo diversity > antenna: use default antenna mode (RX and TX diversity) - echo fixed-a > antenna: use fixed antenna A for RX and TX - echo fixed-b > antenna: use fixed antenna B for RX and TX - echo clear > antenna: reset antenna statistics Signed-off-by: Bruno Randolf <br1@einfach.org> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10rndis_wlan: Implement cfg80211 PMKSA APIJussi Kivilinna
Add support for cfg80211 set_pmksa/del_pmksa/flush_pmksa. Updating PMKID entry list is done on driver side since NDIS API requires full list update. v2: - fixed to use new netdev_dbg/warn/etc instead of old devdbg/warn/etc - fixed false padding from struct ndis_80211_bssid_info Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10rndis_wlan: get max_num_pmkids from deviceJussi Kivilinna
Extend rndis_wlan_get_caps() to get 802.11 capabilities and maximum supported number of PMKIDs by device. v2: fixed to use new netdev_dbg/warn/etc instead of old devdbg/warn/etc Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10rndis_wlan: remove unused variables from priv structureJussi Kivilinna
Some variables were left unused after cfg80211 conversion. Remove those and related deadcode. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10rndis_wlan: copy only useful data from rndis_command respondJussi Kivilinna
rndis_query_oid() uses full output buffer size to copy response buffer from rndis_command()/device. This doesn't cause problems as response buffer is sized based on output buffer but does copy extra unset bytes. So change rndis_query_oid() so that only meaningful bytes are being copied. Also in case of malfunctioning device/cable/etc returned data offset from device might be wrong so bound check memory access correctly, so add checks for this. v2: fixed to use new netdev_dbg/warn/etc instead of old devdbg/warn/etc Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10minstrel: make the rate control ops reusable from another rc implementationFelix Fietkau
This patch makes it possible to reuse the minstrel rate control ops from another rate control module. This is useful in preparing for the new 802.11n implementation of minstrel, which will reuse the old code for legacy stations. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10minstrel: simplify and fix debugfs codeFelix Fietkau
This patch cleans up the debugfs read function for the statistics by using simple_read_from_buffer instead of its own semi-broken hack. Also removes a useless member of the minstrel debugfs info struct. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10ath5k: Fix TX/RX padding for all framesBenoit Papillault
Currently, the padding position is based on ieee80211_get_hdrlen_from_skb(). This is not correct since the HW does padding on RX (and expect the same padding to be present on TX) at the following position : - management : 24 + 6 if 4-addr format - control : 24 + 6 if 4-addr format - data : 24 + 6 if 4-addr format + 2 if QoS - invalid : 24 + 6 if 4-addr format whereas ieee80211_get_hdrlen_from_skb() is : - management : 24 - control : 16 except for ACK/CTS where it is 10 - data : 24 + 6 if 4-addr format + 2 if QoS + 2 if QoS & order - invalid : 24 So, correct frames are not affected : management frames do not use 4-addr format, control frames have no body and invalid frames are ... not valid by definition. However, in order to use monitor interface for debugging purpose, one must be able to send/receive any frames, be it correct or not. Such frames are affected by incorrect padding. Moreover, since padding is added on TX, we need to remove it before calling ieee80211_tx_status. This affect TX packets received by monitor interfaces. It has been tested between an ath5k based card (AR5212) and an ar9170usb based card (netgear WNDA3100) using a frame generator and a monitor interface for each card. v2: Added ath5k_add_padding / ath5k_remove_padding Signed-off-by: Benoit Papillault <benoit.papillault@free.fr> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10mac80211: give warning if building w/out rate ctrl algorithmAndres Salomon
I discovered that if EMBEDDED=y, one can accidentally build a mac80211 stack and drivers w/ no rate control algorithm. For drivers like RTL8187 that don't supply their own RC algorithms, this will cause ieee80211_register_hw to fail (making the driver unusable). This will tell kconfig to provide a warning if no rate control algorithms have been selected. That'll at least warn the user; users that know that their drivers supply a rate control algorithm can safely ignore the warning, and those who don't know (or who expect to be using multiple drivers) can select a default RC algorithm. Signed-off-by: Andres Salomon <dilinger@collabora.co.uk> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10iwmc3200wifi: typo fix and code cleanupZhu Yi
Fix wrong IWM_RX_TICKET_DROP_REASON_MSK macro define, typo and other small cleanups. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10iwmc3200wifi: mark some pmksa functions staticZhu Yi
This fixes the sparse warnings. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10iwmc3200wifi: increase concatenated bufferZhu Yi
Increase concatenated buffer from 8K to 32K to get better performance. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10iwmc3200wifi: protect rx_tickets and rx_packets[] listsZhu Yi
Protect rx_tickets and rx_packets[] lists with spinlocks to fix the race condition for concurrent list operations. In iwmc3200wifi both sdio_isr_worker and rx_worker workqueues can access the rx ticket and packets lists at the same time under high rx load. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10iwmc3200wifi: add ftrace event tracing supportZhu Yi
Add event tracer for iwmc3200wifi driver. When enabled, all the commands and responses between the driver and firmware (also including Tx/Rx frames) will be recorded in the ftrace ring buffer. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10iwmc3200wifi: remove "_safe" for some list_for_each_entry usageZhu Yi
Use list_for_each_entry instead of list_for_each_entry_safe in places iteration against list entry removal is not required. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10iwmc3200wifi: refuse to associate on unallowed channelsZhu Yi
We need to make sure we don't associate with APs on unallowed channels (according to regulatory setting). This could happen when the channel is not specified (auto-select) within the connection request. In this case we get the AP's channel until the firmware indicates the association succeeded later. We need to verify the associated channel. If the channel is disabled by regulatory, we have to disassociate with the AP. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10enhance sysfs rfkill interfaceflorian@mickler.org
This commit introduces two new sysfs knobs. /sys/class/rfkill/rfkill[0-9]+/blocked_hw: (ro) hardblock kill state /sys/class/rfkill/rfkill[0-9]+/blocked_sw: (rw) softblock kill state Signed-off-by: Florian Mickler <florian@mickler.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10Document the rfkill sysfs ABIflorian@mickler.org
This moves sysfs ABI info from Documentation/rfkill.txt to the ABI subfolder and reformats it. This also schedules the deprecated sysfs parts to be removed in 2012 (claim file) and 2014 (state file). Signed-off-by: Florian Mickler <florian@mickler.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-09iwl3945: check ucode load error codeAbhijeet Kolekar
Check successful completion of BSM loading. Give a chance to load BSM again. If BSM loading is unsuccessful we should exit and not initilize NIC. Before this checking even if the BSM loading failed driver tries to initilize the NIC which should not be the case. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-03-09iwlwifi: clean up queue/fifo handlingJohannes Berg
4965 hardware has 7 queues reserved and the remaining ones used for aggregation, 5000 and higher need to have 10 reserved. This is not very clear in the code right now, unfortunately. Introduce a new IWL_TX_FIFO_UNUSED constant and make the queue/FIFO mapping arrays able to hold that value, and change the setup code to reserve all queues in the arrays (the queue number is the index) and use the new unused constant to not map those queues to any FIFO. Additionally, clear up the AC/queue mapping code to be more understandable. The mapping is the identity mapping right now, but with the mapping function I think it's easier to understand what happens there. Finally, HCCA isn't implemented at all and I think newer microcode removed it, so let's remove all mention of it in the code, some comments remain for 4965. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Shanyu Zhao <shanyu.zhao@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-03-09iwlwifi: add internal short scan support for 3945Wey-Yi Guy
Add internal short scan support for 3945 NIC, This allows 3945 NIC to support radio reset request like the other series of NICs. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-03-09iwlwifi: remove unnecessary parameter in scan functionWey-Yi Guy
small change to remove unnecessary "ret" parameter since it not being used. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-03-09iwlwifi: remove duplicate functionWey-Yi Guy
"internal_scan" debugfs function serves the same propose of mode "0" of "force_reset" debugfs function. Remove it to avoid duplicate. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-03-09iwlwifi: remove needlessly exported symbolsReinette Chatre
iwl_apm_stop_master and iwl_internal_short_hw_scan are only used within iwlcore and thus do not need to be exported. Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-03-09iwlwifi: change WEP key protection to use mutexJohannes Berg
For later station notification support we would like WEP key setting to be done synchronously always. Currently all places from which WEP key is set can sleep, but the usage of sta_lock prevents it to do so. Modify the locking to use priv->mutex instead and thus enable this call to sleep. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-05-31 21:13:25 +0000