summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-04-09mac80211: check whether scan is in progress before queueing scan_workmaster-2010-04-09Teemu Paasikivi
As scan_work is queued from work_work it needs to be checked if scan has been started during execution of work_work. Otherwise, when hw scan is used, the stack gets error about hw being busy with ongoing scan. This causes the stack to abort scan without notifying the driver about it. This leads to a situation where the hw is scanning and the stack thinks it's not. Then when the scan finishes, the stack will complain by warnings. Signed-off-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-09wl1271: Add support for connection quality monitoringJuuso Oikarinen
This patch will add support for connection quality monitoring by configuring rssi triggers to the firmware, and enabling the firmware rssi trigger functionality. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-09wl1271: Go to ELP in idleJuuso Oikarinen
Allow the wl1271 go to ELP mode also in idle. This will reduce current consumption remarkably in idle mode (~12mA -> ~0.2mA) Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-09wl1271: Fix mac80211 RTS threshold requests during WL1271_STATE_OFFSaravanan Dhanabal
mac80211 sends RTS threshold configuration request even if the wl1271 interface state is WL1271_STATE_OFF. This leads to failures during pm tests. This patch leaves the configuration function, if the interface is going down. Signed-off-by: Saravanan Dhanabal <ext-saravanan.dhanabal@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-09wl1271: Fix mac80211 configuration requests during WL1271_STATE_OFFSaravanan Dhanabal
mac80211 sends configuration requests even if the wl1271 interface state is WL1271_STATE_OFF. This creates warnings from mac80211. This patch leaves the configuration functions, if the interface is going down. Signed-off-by: Saravanan Dhanabal <ext-saravanan.dhanabal@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-09wl1271: Fix memory leaks on driver initializationJuuso Oikarinen
This patch fixes some memory leaks occurring during driver init/de-init. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-09mac80211: fix typo for LDPC capabilityLuis R. Rodriguez
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-09mac80211: delay skb linearising in rx decryptionZhu Yi
We delay the skb linearising in ieee80211_rx_h_decrypt so that frames do not require software decryption are not linearized. We are safe to do this because ieee80211_get_mmie_keyidx() only requires to touch nonlinear data for management frames, which are already linearized before getting here. Cc: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-09Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 Conflicts: drivers/net/wireless/iwlwifi/iwl-4965.c
2010-04-08ath5k: fixup some merge damage for AR5211 IQ calibrationJohn W. Linville
Resolution of a merge conflict upstream accidentally removed a hunk of "ath5k: IQ calibration for AR5211 is slightly different", so restore it. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-08iwlwifi: need check for valid qos packet before freeWey-Yi Guy
For 4965, need to check it is valid qos frame before free, only valid QoS frame has the tid used to free the packets. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-08mac80211_hwsim: add sw_scan sw_scan_completemaster-2010-04-08Luis R. Rodriguez
Simple pre-scan and scan complete callbacks, this at least shows to me that mac80211 will issue two scans at the same time on the same wiphy. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-08ath5k: add bounds check to pdadc tableBob Copeland
We check the bounds on pdadc once when correcting for negative curves but not when we later copy values from from the pdadc_tmp array, leading to a potential overrun. Although we shouldn't hit this case in practice, let's be consistent. Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Bob Copeland <me@bobcopeland.com> Acked-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-08ath5k: fix race condition in tx desc processingBob Copeland
As pointed out by Benoit Papillault, there is a potential race condition between the host and the hardware in reading the next link in the transmit descriptor list: cpu0 hw tx for buf completed raise tx_ok interrupt process buf buf->ds_link = 0 read buf->ds_link This change checks txdp before processing a descriptor (if there are any subsequent descriptors) to see if hardware moved on. We'll then process this descriptor on the next tasklet. Signed-off-by: Bob Copeland <me@bobcopeland.com> Acked-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-08ath5k: clean up queue manipulationBob Copeland
Review spotted a couple of strange invocations to ieee80211_wake_queues that could potentially cause problems: - queues are awakened in the calibration tasklet before phy calibration, and then again after calibration - queues are awakened inside reset when we're trying to drain the ath5k transmit queues, and again after reset is completed (in callers to ath5k_reset_wake). In both cases the first wake is unnecessary, so remove it. Signed-off-by: Bob Copeland <me@bobcopeland.com> Acked-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-08ath5k: correct channel setting for 2.5 mhz spacingBob Copeland
These channels aren't selectable anyway, but our calculations for 2.5 mhz frequencies are incorrect. The value is supposed to be: (frequency - reference) * (10/25) i.e., divide by 2.5, but we were instead doing: (10 * frequency - reference) / 25. Additionally, the check for (frequency % 5 == 2) had an extra subtraction that wasn't in madwifi HAL. Signed-off-by: Bob Copeland <me@bobcopeland.com> Acked-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-08mac80211: enhance tracingJohannes Berg
Enhance tracing by adding tracing for a variety of callbacks that the drivers call, and also for internal calls (currently limited to queue status). This can aid debugging what is going on in mac80211 in interaction with drivers, since we can now see what drivers call and not just what mac80211 calls in the driver. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-08rt2x00: use rt2800_config_channel_rt3x for rt2872Helmut Schaa
rt2872 needs the same rf register setup as rt3070 and rt3090, hence use rt2800_config_channel_rt3x instead of rt2800_config_channel_rt2x. This change allows me to actually switch channels and hence scan all configured channels on the RT305x SoC platform (which uses a rt2872) here. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Tested-by: Luis Correia <luis.f.correia@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-08ath9k: simplify AR9220 fixup code for AR_AN_TOP2 registerPavel Roskin
Don't modify ah->iniModes, it's supposed to be constant. Instead, apply the fixup when the data is written to the registers. Change ath9k_hw_init_eeprom_fix() to only determine whether the fixup is needed. This allows similteneous support for AR9220 cards that need AR_AN_TOP2 fixup (such as Ubiquiti SR71-12) and those that don't need it (D-Link DWA-552 rev A2). Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-08ath9k_htc: Fix HTC layer memleakSujith
Messages that are generated by the HTC layer don't have any TX callback endpoints assigned to them. Consequently, the allocated SKBs are never freed. Fix this issue by handling this case in the HTC layer itself. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-08ath9k_htc: Use anchors for REGOUT pipeSujith
hif_usb_regout_cb() frees the given URB, which is borked by design. Use an anchor to simplify URB management. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-08ath9k_htc: Fix module unloading issueSujith
The maximum number of packets in a single buffer in stream mode is 10. The driver currently uses 8 - which caused stack corruption, in the absence of any kind of OOB checking. Fixing this to the correct value of 10 fixes the module unload issue. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Tested-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-08ath9k_htc: Fix RX URB reference countSujith
RX URBs are automatically freed when the reference count drops to zero - this currently doesn't happen when usb_kill_anchored_urbs() is called during unload. Fix this by dropping the reference count by one during initial submission. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-08ath9k_htc: Protect RX stream variablesSujith
Use a spin lock to prevent concurrent access to variables dealing with RX stream mode handling. Currently, no protection is implemented - which causes problems in RX. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-08rt2x00: Enable powersaving by default again on rt2500usb.Gertjan van Wingerde
Now that the powersave issues on rt2500usb have been tackled, powersave can be enabled by default again. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-08mac80211: Moved mesh action codes to a more visible locationJavier Cardona
Grouped mesh action codes together with the other action codes in ieee80211.h. Signed-off-by: Javier Cardona <javier@cozybit.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-08wireless/ath: remove trailing space in messagesFrans Pop
Signed-off-by: Frans Pop <elendil@planet.nl> Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-08Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into merge Conflicts: Documentation/feature-removal-schedule.txt drivers/net/wireless/ath/ath5k/phy.c drivers/net/wireless/iwlwifi/iwl-4965.c drivers/net/wireless/iwlwifi/iwl-agn.c drivers/net/wireless/iwlwifi/iwl-core.c drivers/net/wireless/iwlwifi/iwl-core.h drivers/net/wireless/iwlwifi/iwl-tx.c
2010-04-07mac80211: fix paged RX cryptomaster-2010-04-07Johannes Berg
WEP crypto was broken, but upon finding the problem it is evident that other things were broken by the paged RX patch as well. To fix it, for now move the linearising in front. This means that we linearise all frames, which is not at all what we want, but at least it fixes the problem for now. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-07mac80211: fix some RX aggregation lockingJohannes Berg
A few places in mac80211 do not currently acquire the sta lock for RX aggregation, but they should. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-07mac80211: clean up/fix aggregation codeJohannes Berg
The aggregation code has a number of quirks, like inventing an unneeded WLAN_BACK_TIMER value and leaking memory under certain circumstances during station destruction. Fix these issues by using the regular aggregation session teardown code and blocking new aggregation sessions, all before the station is really destructed. As a side effect, this gets rid of the long code block to destroy aggregation safely. Additionally, rename tid_state_rx which can only have the values IDLE and OPERATIONAL to tid_active_rx to make it easier to understand that there is no bitwise stuff going on on the RX side -- the TX side remains because it needs to keep track of the driver and peer states. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-07mac80211: rename WLAN_STA_SUSPEND to WLAN_STA_BLOCK_BAJohannes Berg
I want to use it during station destruction as well so rename it to WLAN_STA_BLOCK_BA which is also the only use of it now. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-07mac80211: remove ieee80211_sta_stop_rx_ba_sessionJohannes Berg
All callers of ieee80211_sta_stop_rx_ba_session can just call __ieee80211_stop_rx_ba_session instead because they already have the station struct, so do that and remove ieee80211_sta_stop_rx_ba_session. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-07mac80211: remove irq disabling for sta lockJohannes Berg
All other places except one in the TX path, which has BHs disabled, and it also cannot be locked from interrupts so disabling IRQs is not necessary. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-07mac80211: fix station destruction problemJohannes Berg
When a station w/o a key is destroyed, or when a driver submits work for a station and thereby references it again, it seems like potentially we could reference the station structure while it is being destroyed. Wait for an RCU grace period to elapse before finishing destroying the station after we have removed the station from the driver and from the hash table etc., even in the case where no key is associated with the station. Also, there's no point in deleting the plink timer here since it'll be properly deleted just a bit later. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-07ath9k_htc: Configure the beacon timers once the scan is completed.Vivek Natarajan
Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-07ath9k_htc: Add support for power save.Vivek Natarajan
Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-07ath9k: Add support for newer AR9285 chipsets.Vivek Natarajan
This patch adds support for a modified newer version of AR9285 chipsets. Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-07cfg80211: Add local-state-change-only auth/deauth/disassocJouni Malinen
cfg80211 is quite strict on allowing authentication and association commands only in certain states. In order to meet these requirements, user space applications may need to clear authentication or association state in some cases. Currently, this can be done with deauth/disassoc command, but that ends up sending out Deauthentication or Disassociation frame unnecessarily. Add a new nl80211 attribute to allow this sending of the frame be skipped, but with all other deauth/disassoc operations being completed. Similar state change is also needed for IEEE 802.11r FT protocol in the FT-over-DS case which does not use Authentication frame exchange in a transition to another BSS. For this to work with cfg80211, an authentication entry needs to be created for the target BSS without sending out an Authentication frame. The nl80211 authentication command can be used for this purpose, too, with the new attribute to indicate that the command is only for changing local state. This enables wpa_supplicant to complete FT-over-DS transition successfully. Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-07wl1251: use DRIVER_NAME macro in wl1251_spi_driverKalle Valo
Better use the macro for consistency, the content is the same anyway. Signed-off-by: Kalle Valo <kvalo@adurom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-07ath5k: Adaptive Noise Immunity (ANI) ImplementationBruno Randolf
This is an Adaptive Noise Imunity (ANI) implementation for ath5k. I have looked at both ath9k and HAL sources (they are nearly the same), and even though i have implemented some things differently, the basic algorithm is practically the same, for now. I hope that this can serve as a clean start to improve the algorithm later. This also adds a possibility to manually control ANI settings, right now only thru a debugfs file: * set lowest sensitivity (=highest noise immunity): echo sens-low > /sys/kernel/debug/ath5k/phy0/ani * set highest sensitivity (=lowest noise immunity): echo sens-high > /sys/kernel/debug/ath5k/phy0/ani * automatically control immunity (default): echo ani-on > /sys/kernel/debug/ath5k/phy0/ani * to see the parameters in use and watch them change: cat /sys/kernel/debug/ath5k/phy0/ani Manually setting sensitivity will turn the automatic control off. You can also control each of the five immunity parameters (noise immunity, spur immunity, firstep, ofdm weak signal detection, cck weak signal detection) manually thru the debugfs file. This is tested on AR5414 and nearly doubles the thruput in a noisy 2GHz band. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-06b43: N-PHY: fix copy&paste typoRafał Miłecki
Reported-by: Myhailo Danylenko <isbear@ukrpost.net> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-06wl1271: Fix tx queue flushingJuuso Oikarinen
This patch modifies tx-queue flushing to correspond with tx-path - i.e. also frames for which no ack was requested are forwarded to the mac80211 for disposal. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-06wl1271: Fix debug prints for beacon-loss and psm-entry-fail scenariosJuuso Oikarinen
Remove ERROR print from psm-entry-fail scenario, instead use an INFO print. Also, add INFO print to the beacon-loss scenario. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-06wl1271: Configure a higher listen interval to AP upon associationJuuso Oikarinen
Increase the fixed listen-interval max value configured to the mac80211 on driver init. This value will allow a larger value to be configured to the AP, which means the AP will buffer our frames longer. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-06wl1271: Configure rates for templatesJuuso Oikarinen
Configure meaningful rates to be used with the templates. For control frames, use the determined basic rates (currently the lowest rate for the band) and for data-frames (null-funcs) let the firmware use the current rate policy to determine the rate. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-06wl1271: Use minimum rate for each band for control messagesJuuso Oikarinen
Currently the mac80211 is not telling a hardware rate controlled driver a rate to use for association frames etc. So to be safe, use the lowest rate of each band for communication. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-06wl1271: Fix keep-alive related command errorJuuso Oikarinen
The firmware does not like the host configuring the keep-alive after it has been once configured after a join-operation. Instead, it will complain about invalid parameters, which do not break functionality, but do not look nice in the syslog either. This patch prevents the complaints by only configuring the keep-alive once for an association, after the first time join is performed with the correct bssid. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-06wl1271: added missing command header in wl1271_cmd_disconnectLuciano Coelho
The command header was missing in the wl1271_cmd_disconnect structure. It was working fine by sheer luck, because the parameters are not critical and because our wl1271_cmd_send() function was overwriting the rx_config_options with the actual header. This patch adds the header to the command structure. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-06wl1271: fix sdio driver name in wl1271_sdio_driverLuciano Coelho
Our SPI driver is called "wl1271_spi" in the driver information structure. Let's use the same for SDIO so that things are aligned. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-05-31 15:03:25 +0000