summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-08-24Merge branch 'master' of ↵master-2010-08-24John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 Conflicts: drivers/net/wireless/iwlwifi/iwl-core.c drivers/net/wireless/iwlwifi/iwl-core.h
2010-08-24cfg80211: add some documentationJohannes Berg
Add some documentation for cfg80211. I'm hoping some of the regulatory documentation will be filled by somebody more familiar with it, hint hint! :) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-24iwlwifi: do not spuriously call ieee80211_scan_completedJohannes Berg
When a scan is aborted because the corresponding virtual interface is removed, we may still later attempt to tell mac80211 that the scan completed. This is obviously wrong, since we already told it that it was aborted, so don't do that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-24iwlagn: do not check for AP mode for WEP keysJohannes Berg
Even when we configure WEP keys in AP mode ones without a station pointer are default keys, so don't check for AP mode here. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-24ath9k_htc: Add support for bluetooth coexistence.Vivek Natarajan
Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-24ath9k_common: Move bt_stomp to common for sharing with ath9k_htc.Vivek Natarajan
Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-24nl80211: some documentation fixesJohannes Berg
The nl80211 documentation is currently never generated, so problems have accumulated. Fix most of the trivial ones. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-24mac80211: fix docbookJohannes Berg
Fix a small problem in the documentation for ieee80211_request_smps, and a now erroneous inclusion of enum ieee80211_key_alg, which no longer exists after the change to ciphers. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-24wl1251: wait for join command complete eventGrazvydas Ignotas
Poll for join command completion instead of waiting blindly for 10 msecs. There is a timeout of 100 msecs, if the command doesn't complete by then, we return an error code. Based on wl1271 patch 99d84c1de8fdf5f9b09f07fdbc628857a040bf8b by Luciano Coelho. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Acked-by: Kalle Valo <kvalo@adurom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-24wl1251: fix beacon filter table structureGrazvydas Ignotas
The beacon filter table configuration ACX structure had certain elements reversed, fix it to match TI driver. Based on wl1271 patch 1937e742639c03a6fe77239c3003ce9602302117 by Juuso Oikarinen. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Acked-by: Kalle Valo <kvalo@adurom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-24wl1251: fix event handling mechanismGrazvydas Ignotas
In case both A and B events occured simultaneously, current code would only process A and clear both interrupts. Make it process both events instead. Based on wl1271 patches by Juuso Oikarinen: 1fd2794f36913992798184c464fe8f85753b13e0 13f2dc52c69bcca074cd12d4806953b2af45c386 Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Acked-by: Kalle Valo <kvalo@adurom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-24wl1251: add missing __packed modifier for some structsGrazvydas Ignotas
Several acx and cmd structures are missing __packed modifier, add it. This was noticed while comparing them with corresponding wl1271 code. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Acked-by: Kalle Valo <kvalo@adurom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-24iwlwifi: move debug options into submenuJay Sternberg
more debug options being added so it is useful to move them into a submenu for ease of readability when using config commands like make menuconfig and make xconfig Signed-off-by: Jay Sternberg <jay.e.sternberg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-24iwlwifi: enable experimental ucode supportJay Sternberg
ucode firmware may need to be released as experimental for testing or debugging. released ucode filenames have the API version as the last component. experimental ucode files will have that component be "exp" and the fw_version string reported by ethtool will also contain the string EXP to clearly identify this ucode from released ucode. EXP is short for EXPERIMENTAL since fw_version has a max lenght on 32. this capability is controlled by Kconfig and defaulted to not be used. Signed-off-by: Jay Sternberg <jay.e.sternberg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-24iwlwifi: remove unused iwl_send_card_state functionWey-Yi Guy
iwl_send_card_state() is not being call from anywhere, remove it. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-24iwlwifi: configurable ampdu factor and densityWey-Yi Guy
Add ampdu factor and density to .cfg, this allow both parameters can be configure per device based. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-24iwlwifi: more generic name for rssi calc in iwlagnWey-Yi Guy
Change the define to more generic naming to match _agn devices since the rssi calculation are common function for 5000 series and up Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-24iwlwifi: additional parameter in REPLY_RX_PHY_CMDWey-Yi Guy
Adding additional parameter in REPLY_RX_PHY_CMD, frame_time indicate the frame's time on the air based on byte count and frame rate calculation Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-24iwlagn: continue perform rate scale when error detectedWey-Yi Guy
If for some reason, the actual link command not matching neither active nor search table; instead of return and not performing rate scale, by-pass the data collection and continue the rate scale process. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-24iwlagn: adjust starting action for rate scaleWey-Yi Guy
During rate scale, reset starting action after making action adjustment to avoid the possibility of break out of loop too early. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-24iwlwifi: refactor iwl_setup_rxon_timingJohannes Berg
All callers of iwl_setup_rxon_timing() also send the command right away, so rename the function to iwl_send_rxon_timing() and move the sending into it. Also, some callers clear the data, this can be done always and thus moved in as well. Finally, there's no reason for the function to acquire the spinlock, but it should be called with the mutex held, so assert that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-24iwlwifi: cleanup iwl_set_rxon_channel()Shanyu Zhao
Update outdated comments of iwl_set_rxon_channel() to reflect the current signature. Also remove the unnecessary validation of the channel. Those channel info are constructed in iwlwifi driver and mac80211 will never modify the content of the struct. Also everytime before this function is called the channel info has been validated already (as a paranoid check). Signed-off-by: Shanyu Zhao <shanyu.zhao@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-24iwlwifi: avoid race condition in channel changeShanyu Zhao
When iwl_mac_config() is called by mac80211, the channel pointer hw->conf->channel can potentially change, resulting in mismatch band and channel number when configuring RXON command. To avoid this situation, save the channel pointer in local variables and validate the channel before using it. Note that priv->mutex is locked during the whole function so the local variables are safe. Same change is applied to iwl_mac_channel_switch() since basically it copies code from iwl_mac_config(). Also removed an outdated comment in the flow. Signed-off-by: Shanyu Zhao <shanyu.zhao@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-24iwlwifi: do not call ieee80211_frequency_to_channelShanyu Zhao
A few cases in iwlwifi driver function ieee80211_frequency_to_channel() is called to get channel number from center frequency. This is not needed since the channel number is already saved in hw_value field of struct ieee80211_channel in function iwlcore_init_geos(). So replace those function calls with hw_value field of struct ieee80211_channel. Signed-off-by: Shanyu Zhao <shanyu.zhao@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-24iwlwifi: make aggregation time limit configurableWey-Yi Guy
By default, aggregation time limit is 4000 uSec, add the parameter to .cfg to allow this parameter can be configure per device base if needed. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-24iwlwifi: max/min aggregation time limitWey-Yi Guy
Set the minimum and maximum for aggregation time limit in uSec. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-24iwlwifi: additional comments in iwl_cfgWey-Yi Guy
No functional changes, just add additional comments to iwl_cfg structure Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-24iwlwifi: remove unused defineWey-Yi Guy
IWL_SIXTY_SECS is not been used, remove it Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-24Hostap: Fix "'ret' set but not used" warning message from GCC in hostapJulian Calaby
CC [M] drivers/net/wireless/hostap/hostap_ioctl.o drivers/net/wireless/hostap/hostap_ioctl.c: In function 'prism2_request_scan': drivers/net/wireless/hostap/hostap_ioctl.c:1666:6: warning: variable 'ret' set but not used Signed-off-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-24iwlwifi: fix thermal throttling related power management operationWey-Yi Guy
The current approach is very broken because it adds an often-used code path that will not initialise "cmd" at all. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Shanyu Zhao <shanyu.zhao.intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-24mac80211-hwsim: allow configuring IBSSJohannes Berg
It will not look standard-compliant in a sniffer because because it doesn't * sync TSF * adjust the TSF in beacons * send beacons at TBTT * cancel beacons when another phy sends However, it does allow testing the configuration and parts of the mac80211 code for IBSS and as such is still useful. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-24wireless: move documentation booksJohannes Berg
This moves mac80211 documentation into a new 802.11 bookset and also adds a cfg80211 book to the set. All of this is rather incomplete, but it's easier to work with big code moving as a separate patch. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-24p54: improve eeprom parserChristian Lamparter
Like other vendors, p54* devices have a checksum for the EEPROM descriptor data. This patch enhances the parser code to generate and verify the data fields, before initializing the radio-chip on the card. Note: If you have to bootstrap an alternative EEPROM image for your device and you don't know how to generate a valid crc ccitt checksum, you should take a look at: http://git.kernel.org/?p=linux/kernel/git/chr/p54tools.git The "checksum" utility loads a binary p54 EEPROM blob (use the -f switch, to skip the check) and applies the correct crc automatically. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-24p54spi: fix eeprom checksumChristian Lamparter
This patch corrects the bogus descriptor checksum of our Nokia N8XX EEPROM blob. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-24b43: N-PHY: Implement RX core state setting for rev.2 and earlier PHYsGábor Stefanik
Rev.3+ support coming in a later patch. Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-24b43: N-PHY: Implement MAC PHY clock setGábor Stefanik
Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-24b43: N-PHY: Fix typo in function name (gain_crtl -> gain_ctrl)Gábor Stefanik
Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-24b43: N-PHY: Implement Host Flags write during device initGábor Stefanik
Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-24iwlwifi: separate thermal throttling functionWey-Yi Guy
"Thermal Throttling" is an advance feature which only available for newer _agn devices. Move from iwl-core to iwl-agn for better code organization. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-24drivers/net/wireless/wl12xx: Use available error codesJulia Lawall
Error codes are stored in ret, but the return value is always 0. Return ret instead. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ local idexpression x; constant C; @@ if (...) { ... x = -C ... when != x ( return <+...x...+>; | return NULL; | return; | * return ...; ) } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-24drivers/net/wireless/wl12xx: Use available error codesJulia Lawall
In each case, error codes are stored in ret, but the return value is always 0. Return ret instead. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ local idexpression x; constant C; @@ if (...) { ... x = -C ... when != x ( return <+...x...+>; | return NULL; | return; | * return ...; ) } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Kalle Valo <kvalo@adurom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-24ath5k: don't enable probe request rx for STAsBob Copeland
AR5K_RX_FILTER_PROBEREQ enables reception of probe requests, but the filter flag FIF_BCN_PRBRESP_PROMISC is actually about receiving beacons and probe _responses_, so we shouldn't turn on the filter when scanning. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-24ath5k: remove all mention of monitor iftypeBob Copeland
Monitor interfaces are never seen by the driver so these cases are never reached. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-24ath5k: remove monitor check in receive_frame_ok filterBob Copeland
Monitor interfaces are never seen by the driver, so tests based on that opmode don't make sense. Also, we already pass all mic failure packets. Consequently this code is actually accepting any frames with just crypto errors and rejecting those with CRC, FIFO, and PHY errors for all interface types. Adjust the code and comment accordingly. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-24ath5k: clean up some commentsBob Copeland
This fixes a few misspellings, word repetitions, and some grammar nits in ath5k comments. No code changes. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-24ath5k: remove own (wrong) IEEE80211_MAX_LENNick Kossifidis
Use the version already supplied in include/linux/ieee80211.h. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-24ath5k: rename ath5k_hw_set_associd to _set_bssidNick Kossifidis
Although the named function also sets the aid, its main purpose is configuring the bssid and we use that everywhere else. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-24cfg80211/mac80211: extensible frame processingJohannes Berg
Allow userspace to register for more than just action frames by giving the frame subtype, and make it possible to use this in various modes as well. With some tweaks and some added functionality this will, in the future, also be usable in AP mode and be able to replace the cooked monitor interface currently used in that case. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-24mac80211: remove unused don't-encrypt flagJohannes Berg
When MFP is disabled, action frames will not be encrypted since they are management frames and the only management frames that can then be encrypted are authentication frames. Therefore, setting the don't-encrypt flag on action frames is unnecessary. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-24cfg80211: mark ieee80211_hdrlen constJohannes Berg
This function analyses only its single, value-passed argument, and has no side effects. Thus it can be const, which makes mac80211 smaller, for example: text data bss dec hex filename 362518 16720 884 380122 5ccda mac80211.ko (before) 362358 16720 884 379962 5cc3a mac80211.ko (after) a 160 byte saving in text size, and an optimisation because the function won't be called as often. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-05-29 16:22:14 +0000