Age | Commit message (Collapse) | Author |
|
The TXMAXP and TXCSR registers were not set correctly for
the BULK OUT endpoints causing issues in Full speed in
Host mode.
ST-Ericsson Linux next: NA
ST-Ericsson ID: 367049
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: If5f3552235d8909adef4777f08d612df432d8709
Signed-off-by: supriya karanth <supriya.karanth@stericsson.com>
|
|
Connect Micro-A to phone first,Then connect device
usb session should be valid to detect the connected
device,Until host cable (micro-A) removal.
MUSB session bit is cleared when usb host cable
(Micro-A) removal from the phone,Not in case of
only device disconnection from the usb host cable.
ST-Ericsson ID: 364426
ST-Ericsson FOSS-OUT ID: NA
ST-Ericsson Linux next: NA
Signed-off-by: Thirupathi <thirupathi.chippakurthy@stericsson.com>
|
|
MUSB_TXCSR_TXPKTRDY will not get cleared if the data is not on
the bus. So, need to wait for it to clear in the DMA completion
callback.As per musb datasheet, generally mode 1 needs to be
used for data length greater than or equal to max packet size.
Bus reset happening due to scsi timeout,since in this case
should not return continue for next transfers.
ST-Ericsson ID:ER 365087
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: NA
Signed-off-by: Thirupathi <thirupathi.chippakurthy@stericsson.com>
|
|
During boot time, multiple calls are made to Link status
function by otg_set_host and otg_set_peripheral. This in
turn calls clock and regulator enabling multiple times
which creates problem with the reference count of
regulators. Hence this blocks the CPU idle since the
regulators are not released properly due to multiple acquire.
So, Link status function calls are removed from otg_set_host
and otg_set_peripheral which are not needed. The Link status
call during boot shall be handled by the ab8500_usb_boot_detect
function.
ST-Ericsson ID: 373105
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I2ead5b546273be822b3e9e9f588a1954b3fa10f2
Signed-off-by: Sakethram Bommisetti <sakethram.bommisetti@stericsson.com>
|
|
if we have more endpoints configured than
enabled on fifo_mode, then we need to be
careful on save/restore context operations,
otherwise we will try to access uninitialized
__iomem pointer.
ST-Ericsson Linux next: NA
ST-Ericsson ID: 370868, 372121
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: Iacca00fbb3b97bf6e25f7d7652dd9d53fb9adc16
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Sakethram Bommisetti <sakethram.bommisetti@stericsson.com>
|
|
In suspended state the registers are not saved and restored
properly hence back ported.
(http://git.kernel.org/?p=linux/kernel/git/gregkh/usb.git;
a=commit;h=e4e5b136eb6f2d3aa10dca108a1b787dc92d67df)
Also the code is aligned as per the latest linux-next.
ST-Ericsson ID: 366298, 368370
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: NA
Change-Id: I97ae0b055f6f1300a11190e1083349a6583f0377
Signed-off-by: maheswarudu <v.maheswarudu@stericsson.com>
|
|
Restoring the missing INDEX register value in ux500_restore_context().
without this Hub enumeration is inconsistent,
if we do multiple connect/disconnect.
ST-Ericsson ID: 364906
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: NA
Signed-off-by: Thirupathi <thirupathi.chippakurthy@stericsson.com>
|
|
Restoring the missing INDEX register value in musb_restore_context().
Without this suspend resume functionality is broken with offmode
enabled.
ST-Ericsson ID: AP 369118
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: NA
Signed-off-by: Thirupathi <thirupathi.chippakurthy@stericsson.com>
Acked-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
|
|
This will change to the u8500 wdt that uses a watchdog in the
prcmu to detect hangs on the arm side.
This is not enabled by default and will need a userspace deamon that
enables it, configure it and kicks it from time to time.
Change-Id: Ia4dc1b0d114797cd44e874f432d94a91669d28c8
Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
|
|
Snowball have the GPIO_EN on GPIO161 diffrent from u8500.
Change-Id: I6dddb1e3d7b7b80ce046fbd92a7852a3d0a6c59d
Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
|
|
Fix snowball pins for buttons also do the declaration
the same way all the other decalrations are done.
Moved the u9500 special GPIO swich to before board
variant specific GPIO
Change-Id: I9b25667d3ece4a49706b5c43c7cc7df5df3930e1
Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
|
|
HDMI AV8100 fw is updated to ver 0_3_0.
Supports chip cut version 3.0.
Fixes a TVout bug.
Signed-off-by: John Fredriksson <john.xj.fredriksson@stericsson.com>
|
|
Function 'rndis_bind_config' ended up with the wrong amount
of parameters after androidizing.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
This is for the following blueprint:
https://blueprints.launchpad.net/linaro-android/+spec/uvc-camera-support
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org
|
|
As requested in the following blueprint:
https://blueprints.launchpad.net/linaro-android/
+spec/linaro-android-integrate-ecryptfs
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
igloo-kernel/android-integration-3.0-ux500
Conflicts:
arch/arm/common/Makefile
drivers/gpu/Makefile
drivers/misc/Kconfig
drivers/misc/Makefile
drivers/mmc/card/block.c
drivers/mmc/core/core.c
drivers/usb/gadget/f_rndis.c
drivers/video/Kconfig
include/linux/mmc/host.h
include/net/bluetooth/hci.h
include/net/bluetooth/hci_core.h
include/net/bluetooth/sco.h
kernel/printk.c
net/bluetooth/hci_conn.c
net/bluetooth/hci_event.c
net/bluetooth/l2cap_core.c
net/bluetooth/mgmt.c
net/bluetooth/sco.c
|
|
Currently musb core PM ops does save and restore of context
The platform can enter CPU idle before the platform or
runtime suspend is called.But musb core PM ops is not aware
of CPU idle. and thus it saves and restores some junk context
Since junk context is restored there is instability in usb
functions.
ux500 USB platform file handles the save and restore properly
during cable connect and disconnent.So we don't require handling
of context save and restore in musb core and hence not registering
musb core PM ops.
ST-Ericsson Linux next: NA
ST-Ericsson ID: 370868,372121
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: Ie784c131792b686564561dc9b4bb262042e48504
Signed-off-by: rajaram <rajaram.ragupathy@stericsson.com>
|
|
Snowball V7 and above the accelerometer changed i2c address
and there is now way to detect that in runtime.
So between V7 and V10 we need to probe for the right address.
Change-Id: I39528ca40952a8a868b7aff6c3abd7668420850d
Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
|
|
Change-Id: I39f57da20017ff7e963d0001a99dd426e12c77d0
Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/35833
Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com>
|
|
Add the lps001wp as a consumer of VAUX1, the
device name is a little bad maybe have to be fixed later on.
Change-Id: Ie38b86383d5d1eac5862e3f5d999639d407702f3
Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/35832
Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com>
|
|
Change-Id: If872084fce0c37126f9196a70c0f76db1c4cf37c
Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
|
|
ST-Ericsson ID: 361885
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: Ic914e764ee4816fbfcfbba5129426e2ba51a88ab
Signed-off-by: Jayarami Reddy <jayarami.reddy@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33780
Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com>
|
|
Enable boot partitions to be power and permanently locked via
a sysfs ro_lock node.
ST-Ericsson ID: 344197
ST-Ericsson FOSS-OUT ID: Trivial
ST-Ericsson Linux next: NA
Change-Id: I5534c12b0c1867d562e27a2fb2012624ad3009b4
Signed-off-by: John Beckett <john.beckett@stericsson.com>
Signed-off-by: Johan Rudholm <johan.rudholm@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33117
Reviewed-by: Ulf HANSSON <ulf.hansson@stericsson.com>
|
|
Auto sync for command mode displays are no
longer used and should be implemented in fbdev
if needed.
ST-Ericsson ID: 365249
ST-Ericsson FOSS-OUT ID: Trivial
ST-Ericsson Linux next: NA
Change-Id: Ie67744bebf8d5b7049d055077814460959f86172
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33801
Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
Tested-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
|
|
Auto sync for command mode displays are no
longer used and should be implemented in fbdev
if needed.
ST-Ericsson ID: 365249
ST-Ericsson FOSS-OUT ID: Trivial
ST-Ericsson Linux next: NA
Change-Id: I860d9221dc79d6e5acd53c514d90a8eac57fb18a
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33800
Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
Tested-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
|
|
With this patch it is possible to set
baud rate 3.25 Mbps on CG2900 UART.
ST-Ericsson ID: 364789
ST-Ericsson FOSS-OUT ID: Trivial
ST-Ericsson Linux next: Not tested, 364789
Signed-off-by: Lukasz Rymanowski <lukasz.rymanowski@tieto.com>
Change-Id: If54af597b949038e9ef4c05d80c9235666e127a4
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32689
Reviewed-by: Lukasz RYMANOWSKI <lukasz.rymanowski@stericsson.com>
Tested-by: Lukasz RYMANOWSKI <lukasz.rymanowski@stericsson.com>
Reviewed-by: Par-Gunnar HJALMDAHL <par-gunnar.p.hjalmdahl@stericsson.com>
|
|
mcde_get_main_display is not used in the kernel.
ST-Ericsson ID: 365249
ST-Ericsson FOSS-OUT ID: Trivial
ST-Ericsson Linux next: NA
Change-Id: I86b947e1273ba0a7340cee06cfa1d7d732d064b8
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33784
Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
Tested-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
|
|
ST-Ericsson ID: 366971
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I4724b322f5fba1b4fff49abb525380b98e8801a5
Signed-off-by: Avinash A <Avinash.a@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/34062
Reviewed-by: Avinash A <avinash.a@stericsson.com>
Tested-by: Avinash A <avinash.a@stericsson.com>
Reviewed-by: QABUILD
Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com>
|
|
The cyttsp driver dont have proper ifdefs around
EARLYSUSPEND code.
Change-Id: I03ae51f6b2593ce5cfa601158477eeb485e9f82b
Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
|
|
During APE-Modem communication, for some reasson if software or hardware
fails, instead of calling kernel function BUG() and halting the system
making it no more useful until reboot, initiate a MSR.
ST-Ericsson Linux next: NA
ST-Ericsson ID: 366150
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I59e93b338c3242b506be7775487be065421022b8
Signed-off-by: Arun Murthy <arun.murthy@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33416
Reviewed-by: Bibek BASU <bibek.basu@stericsson.com>
Reviewed-by: QABUILD
Reviewed-by: Magnus TEMPLING <magnus.templing@stericsson.com>
Reviewed-by: Rickard EVERTSSON <rickard.evertsson@stericsson.com>
Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
|
|
Now the battery capacity calculations and the power_supply framework
is updated with the new status when battery has been fully charged
before clients polling the capacity sysfs node are being notified.
ST-Ericsson ID: 358829
ST-Ericsson Linux next: Not tested
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: Icd827863bc694e44495487f8536e95ab5fe0714f
Signed-off-by: Kalle Komierowski <karl.komierowski@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33880
Reviewed-by: QABUILD
Reviewed-by: Johan PALSSON <johan.palsson@stericsson.com>
|
|
This enables audio in u5500_defconfig
ST-Ericsson ID: 362962
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I32d8a1b130fcbd962551f3f4d1aa22b7d414062e
Signed-off-by: Shyam Krishnan M <shyam.moni@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33805
Reviewed-by: QABUILD
Reviewed-by: Ganesh V <ganesh.v@stericsson.com>
Tested-by: Ganesh V <ganesh.v@stericsson.com>
Reviewed-by: Basavaprabhu BANDI <basavaprabhu.bandi@stericsson.com>
Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
|
|
This adds the correct supply name for the
Cypress Touchscreen controller
ST-Ericsson ID: 366971
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I7b1cc31220059edf946ead080a9ad1321d6277f2
Signed-off-by: Avinash A <Avinash.a@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33832
Reviewed-by: Avinash A <avinash.a@stericsson.com>
Tested-by: Avinash A <avinash.a@stericsson.com>
Reviewed-by: QABUILD
Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
|
|
pins.h didn't include <plat/pincfg.h> eventhough it used stuff
from there.
ST-Ericsson Linux next: -
ST-Ericsson ID: -
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I120b2814118aa43323c95f429793a135af6a68d6
Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33424
Reviewed-by: QABUILD
Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com>
|
|
PIN_SLPM_WAKEUP_ENABLE/DISABLE do something completely different
than the name says.
ST-Ericsson Linux next: -
ST-Ericsson ID: -
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: Ib334d2772fa21f58ee84f22dddf34830300a4f86
Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33865
Reviewed-by: QABUILD
Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com>
|
|
Change-Id: Ib874ec36ebd2847aa3ab25fca119a82000ed6918
Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33027
Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
Reviewed-by: QABUILD
|
|
Due to problem with multiple insertion of SD card in DMA mode
the dma support for SD cad is disabled temporarily.
ST-Ericsson Id: ER 365282
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: Ic4bf04f5b3a7d4fe8c2e1d18be11308f5e7eb108
Signed-off-by: Hanumath Prasad <hanumath.prasad@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33785
Reviewed-by: QABUILD
Reviewed-by: Preetham-rao K <preetham.rao@stericsson.com>
Reviewed-by: Ulf HANSSON <ulf.hansson@stericsson.com>
Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
|
|
If the esram is used for LCLA region, this patch will hold the regulator
during when the DMA driver is active. The regulator will be disabled on
a suspend and will be enabled again on resume.
The dma driver initcall has been moved to subsys_initcall(), to ensure
that the regulators are available before we do a regulator_get().
ST-Ericsson ID: 364165
ST-Ericsson FOSS-OUT ID: Trivial
ST-Ericsson Linux next: NA
Change-Id: Ieee3c329c26e9fb43f282716fa57810211f79d85
Signed-off-by: Narayanan G <narayanan.gopalakrishnan@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33434
Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com>
|
|
ST-Ericsson ID: 321190
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Signed-off-by: Jimmy Rubin <jimmy.rubin@stericsson.com>
Change-Id: Idcf924f1e29b24f31349ee602cb86da1fa9e9065
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33681
Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com>
Tested-by: Jimmy RUBIN <jimmy.rubin@stericsson.com>
Reviewed-by: QABUILD
Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
|
|
Removes driver specific fields from platform_data
in sony display driver.
ST-Ericsson ID: 321190
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I2d8a74716de1b8972ab1b5a145e7c1e66896de3d
Signed-off-by: Jimmy Rubin <jimmy.rubin@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32719
Reviewed-by: QABUILD
Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
|
|
Removes sony display driver specific data from board-xxx-mcde.c
ST-Ericsson ID: 321190
ST-Ericsson Linux Next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Signed-off-by: Jimmy Rubin <jimmy.rubin@stericsson.com>
Change-Id: Ice61906fb359edf5ebd665e066c4b537312cb94b
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32718
Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com>
Tested-by: Jimmy RUBIN <jimmy.rubin@stericsson.com>
Reviewed-by: QABUILD
Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
|
|
Some driver data that are located in the board file should be
filled in by the display driver instead
ST-Ericsson ID: 321190
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I564462d9806cfde90de25ff436e0d4946682ef23
Signed-off-by: Jimmy Rubin <jimmy.rubin@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32595
Reviewed-by: QABUILD
Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
|
|
ST-Ericsson ID: 321190
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I606e9f3df286e7f8cd383e6840561ab9742d612c
Signed-off-by: Jimmy Rubin <jimmy.rubin@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33680
Reviewed-by: QABUILD
Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
|
|
performance.c fails to compile if CONFIG_MMC_BLOCK is not defined, so
place the code that depends on the MMC subsystem within #ifdefs.
ST-Ericsson ID: 357764
ST-Ericsson FOSS-OUT ID: Trivial
ST-Ericsson Linux next: NA
Change-Id: Ieb4d560ad1c5089cad2da5ce0f7869dafd1acfe1
Signed-off-by: Johan Rudholm <johan.rudholm@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33686
Reviewed-by: QABUILD
Reviewed-by: Per FORLIN <per.forlin@stericsson.com>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
|
|
So that modem logging over UART does not stop when
IOFORCE is enabled.
ST-Ericsson ID: 361345
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I179ebb419b21f84cc047dc06246bc0bfe443fb48
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33758
Reviewed-by: QABUILD
Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
|
|
collect the modem type info from bootargs and expose
over sysfs
ST-Ericsson ID: 337490
ST-Ericsson FOSS-OUT ID: Trivial
ST-Ericsson Linux next: NA
Change-Id: Ia705e168568a0be08409af792a04091d4e96a50a
Signed-off-by: Bibek Basu <bibek.basu@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32480
Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com>
|
|
lcpa and lcla are written often and the cache_sync()
overhead in writel is costly, especially for wlan where
every single network packet (in RX mode) corresponds
to a separate DMA transfer.
ST-Ericsson Linux next: TESTED
ST-Ericsson ID: 357764
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I8339704de95f2355d22681ac4bd542795770fa89
Signed-off-by: Per Forlin <per.forlin@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33009
Reviewed-by: Narayanan GOPALAKRISHNAN <narayanan.gopalakrishnan@stericsson.com>
Reviewed-by: QABUILD
Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com>
|
|
HSI paramters need to be updated to fit with M7400 HSI config.
ST-Ericsson ID: 364664
ST-Ericsson FOSS-OUT ID: Trivial
ST-Ericsson Linux next: NA
Change-Id: I06f7d62fb82212b8b864a8b90bc00b328af215b7
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32766
Reviewed-by: Christophe GUIBOUT <christophe.guibout@stericsson.com>
Tested-by: Christophe GUIBOUT <christophe.guibout@stericsson.com>
Reviewed-by: QABUILD
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
|