Age | Commit message (Collapse) | Author |
|
The TXMAXP and TXCSR registers were not set correctly for
the BULK OUT endpoints causing issues in Full speed in
Host mode.
ST-Ericsson Linux next: NA
ST-Ericsson ID: 367049
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: If5f3552235d8909adef4777f08d612df432d8709
Signed-off-by: supriya karanth <supriya.karanth@stericsson.com>
|
|
Connect Micro-A to phone first,Then connect device
usb session should be valid to detect the connected
device,Until host cable (micro-A) removal.
MUSB session bit is cleared when usb host cable
(Micro-A) removal from the phone,Not in case of
only device disconnection from the usb host cable.
ST-Ericsson ID: 364426
ST-Ericsson FOSS-OUT ID: NA
ST-Ericsson Linux next: NA
Signed-off-by: Thirupathi <thirupathi.chippakurthy@stericsson.com>
|
|
MUSB_TXCSR_TXPKTRDY will not get cleared if the data is not on
the bus. So, need to wait for it to clear in the DMA completion
callback.As per musb datasheet, generally mode 1 needs to be
used for data length greater than or equal to max packet size.
Bus reset happening due to scsi timeout,since in this case
should not return continue for next transfers.
ST-Ericsson ID:ER 365087
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: NA
Signed-off-by: Thirupathi <thirupathi.chippakurthy@stericsson.com>
|
|
During boot time, multiple calls are made to Link status
function by otg_set_host and otg_set_peripheral. This in
turn calls clock and regulator enabling multiple times
which creates problem with the reference count of
regulators. Hence this blocks the CPU idle since the
regulators are not released properly due to multiple acquire.
So, Link status function calls are removed from otg_set_host
and otg_set_peripheral which are not needed. The Link status
call during boot shall be handled by the ab8500_usb_boot_detect
function.
ST-Ericsson ID: 373105
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I2ead5b546273be822b3e9e9f588a1954b3fa10f2
Signed-off-by: Sakethram Bommisetti <sakethram.bommisetti@stericsson.com>
|
|
This will change to the u8500 wdt that uses a watchdog in the
prcmu to detect hangs on the arm side.
This is not enabled by default and will need a userspace deamon that
enables it, configure it and kicks it from time to time.
Change-Id: Ia4dc1b0d114797cd44e874f432d94a91669d28c8
Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
|
|
In suspended state the registers are not saved and restored
properly hence back ported.
(http://git.kernel.org/?p=linux/kernel/git/gregkh/usb.git;
a=commit;h=e4e5b136eb6f2d3aa10dca108a1b787dc92d67df)
Also the code is aligned as per the latest linux-next.
ST-Ericsson ID: 366298, 368370
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: NA
Change-Id: I97ae0b055f6f1300a11190e1083349a6583f0377
Signed-off-by: maheswarudu <v.maheswarudu@stericsson.com>
|
|
Restoring the missing INDEX register value in ux500_restore_context().
without this Hub enumeration is inconsistent,
if we do multiple connect/disconnect.
ST-Ericsson ID: 364906
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: NA
Signed-off-by: Thirupathi <thirupathi.chippakurthy@stericsson.com>
|
|
This reverts commit ac28162fc038d50e64ff2e81d64046be22533e0f.
|
|
This reverts commit 622859634a663c5e55d0e2a2cdbb55ac058d97b3.
Conflicts:
drivers/usb/musb/musb_core.c
|
|
|
|
Snowball have the GPIO_EN on GPIO161 diffrent from u8500.
Change-Id: I6dddb1e3d7b7b80ce046fbd92a7852a3d0a6c59d
Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
|
|
Fix snowball pins for buttons also do the declaration
the same way all the other decalrations are done.
Moved the u9500 special GPIO swich to before board
variant specific GPIO
Change-Id: I9b25667d3ece4a49706b5c43c7cc7df5df3930e1
Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
|
|
|
|
|
|
|
|
Conflicts:
drivers/misc/Kconfig
drivers/misc/Makefile
drivers/staging/Makefile
|
|
Conflicts:
drivers/staging/Kconfig
drivers/staging/Makefile
|
|
|
|
|
|
|
|
|
|
Conflicts:
drivers/misc/Makefile
|
|
|
|
|
|
Conflicts:
drivers/misc/Makefile
|
|
Conflicts:
drivers/misc/Makefile
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org>
|
|
Adds ability to setup SCO connection parameters through socket option.
ST-Ericsson Linux next: Not tested, ER 256277
ST-Ericsson ID: 256277
ST-Ericsson FOSS-OUT ID: STETL-FOSS-OUT-10137
Change-Id: If859341019fd9f7cc7c0efe95750779e84fac801
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@tieto.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/30136
Reviewed-by: Par-Gunnar HJALMDAHL <par-gunnar.p.hjalmdahl@stericsson.com>
Tested-by: Par-Gunnar HJALMDAHL <par-gunnar.p.hjalmdahl@stericsson.com>
Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
|
|
Adds handling of extension headers to BNEP control packets.
Adds support for BNEP setup connection request handled in pand.
ST-Ericsson Linux next: -
ST-Ericsson ID: 328144
ST-Ericsson FOSS-OUT-ID: Trivial
Depends-On: Id2cbd106af9b380f63d87ea0b4652ec6cd996fa4
Change-Id: I005e00e2fe934dc19f40533953d5b233676f0d0e
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@tieto.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/18117
Reviewed-by: Par-Gunnar HJALMDAHL <par-gunnar.p.hjalmdahl@stericsson.com>
Reviewed-by: Lukasz RYMANOWSKI <lukasz.rymanowski@stericsson.com>
Reviewed-by: Henrik POSSUNG <henrik.possung@stericsson.com>
|
|
Commit ID: Ib94dcbf6: U5500 : Lockdeb correctness fix for modem_irq
Build and boot test only done for 8500 config
Booting will only happend properly if used
Initramfs
Change-Id: I5da03baa7b8ee8f32de5712b7136442fbe2cec1c
Signed-off-by: Bibek Basu <bibek.basu@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/28923
|
|
free phy_driver memory and initialize linkid to 0.
ST-Ericsson ID: 358047
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: NA
Change-Id: Icb295648b23bd836b9f5a40a0b605e4792a8511d
Signed-off-by: Durga Prasada Rao BATHINA <durgaprasadarao.b@stericcson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/31751
Reviewed-by: Bibek BASU <bibek.basu@stericsson.com>
Tested-by: Bibek BASU <bibek.basu@stericsson.com>
|
|
dereferencing NULL pointer,if skb_dequeue returns NULL.
ST-Ericsson ID: 358051
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: NA
Change-Id: Ib88648e68c631cc8eaf839f96af7e847c12922b1
Signed-off-by: Durga Prasada Rao BATHINA <durgaprasadarao.b@stericcson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/31750
Reviewed-by: Bibek BASU <bibek.basu@stericsson.com>
Tested-by: Bibek BASU <bibek.basu@stericsson.com>
|
|
Improper usage of spin lock, which leads to deadlock.
Tx: acquire_lock1 -> trying to acquire lock2
Rx: acquire_lock2 -> trying to acquire lock1
Fix: locking was done through out the function which is not required.
Only in placed where list has be accessed or modified locking is required.
ST-Ericsson Linux next: NA
ST-Ericsson ID: 360284
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I962fcb35f44b6030d6f1151f118d35e328b69156
Signed-off-by: Arun Murthy <arun.murthy@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/30980
Reviewed-by: Hemant-vilas RAMDASI <hemant.ramdasi@stericsson.com>
Tested-by: Hemant-vilas RAMDASI <hemant.ramdasi@stericsson.com>
Reviewed-by: Durga Prasada Rao BATHINA <durgaprasadarao.b@stericsson.com>
|
|
Code changes from internal git that will / are submitted to kernel
upstream.
- CAIF SPI. Multiple bug fixes, power management.
Change-Id: I7e0f989ec5508358efeb3459c561d40dc94ed0a8
Signed-off-by: Erwan Bracq <erwan.bracq@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/21536
Reviewed-by: QATEST
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
|
|
Some added blank line and BUGON for CAIF serial.
Change-Id: If3452ed104b93203fc86fe6a95fd957946447876
Signed-off-by: Erwan Bracq <erwan.bracq@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/21527
Reviewed-by: QATEST
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
|
|
ST-Ericsson Linux next: NA
ST-Ericsson ID: 365681
ST-Ericsson FOSS-OUT ID: NA
Change-Id: I396c2a4d44ded438308e358aa0ad976a397d4dd6
Signed-off-by: Pawel Szyszuk <pawel.szyszuk@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33224
Reviewed-by: Christopher BLAIR <chris.blair@stericsson.com>
Reviewed-by: Derek MORTON <derek.morton@stericsson.com>
Reviewed-by: Andrew LYNN <andrew.lynn@stericsson.com>
|
|
ST-Ericsson Linux next: NA
ST-Ericsson ID: 365683
ST-Ericsson FOSS-OUT ID: NA
Change-Id: I25b92d815447d2746ba25a9db132b242b3da9d9c
Signed-off-by: Pawel Szyszuk <pawel.szyszuk@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33223
Reviewed-by: Christopher BLAIR <chris.blair@stericsson.com>
Reviewed-by: Derek MORTON <derek.morton@stericsson.com>
Reviewed-by: Andrew LYNN <andrew.lynn@stericsson.com>
|
|
ST-Ericsson Linux next: NA
ST-Ericsson ID: 343481
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: Ic59f08e1bb5d858344d95b5d34ae8a5d85d9aa1d
Signed-off-by: Pawel Szyszuk <pawel.szyszuk@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32518
Reviewed-by: Andrew LYNN <andrew.lynn@stericsson.com>
|
|
HSIR FRAMEBURSTCNT register set to the max value 0xFF (255).
ST-Ericsson Linux next: NA
ST-Ericsson ID: 361371
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I095f113633d873a60a5622b1d195c28a2b01ceab
Signed-off-by: Pawel Szyszuk <pawel.szyszuk@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32216
Reviewed-by: Christopher BLAIR <chris.blair@stericsson.com>
Reviewed-by: Derek MORTON <derek.morton@stericsson.com>
Reviewed-by: Andrew LYNN <andrew.lynn@stericsson.com>
|
|
Added support for HSIR PIPELINED mode (also in drivers/hsi)
Added DMA max burst (in DMA words) as a parameter in hsi.h
DMA channel high priority set to TRUE for HSI
ST-Ericsson ID: 356625
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: Id842e61343ce5013992337db085fcbe91dd5b9f7
Signed-off-by: Pawel Szyszuk <pawel.szyszuk@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32180
Reviewed-by: Yann GAUTIER <yann.gautier@stericsson.com>
Reviewed-by: Andrew LYNN <andrew.lynn@stericsson.com>
|
|
ST-Ericsson ID: ER338229
Change-Id: I860d98414ee603ab8b992d6688ff02de7cc6fd98
Signed-off-by: Pawel Szyszuk <pawel.szyszuk@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/22821
Reviewed-by: Alex MACRO <alex.macro@stericsson.com>
Reviewed-by: QATEST
Reviewed-by: Chris KIMBER <chris.kimber@stericsson.com>
Reviewed-by: Andrew LYNN <andrew.lynn@stericsson.com>
|
|
Change-Id: Id0b4672be6a34cf7fca2494ebb6728b679ad9a63
Signed-off-by: Pawel Szyszuk <pawel.szyszuk@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/21042
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
Reviewed-by: Henrik CARLING <henrik.carling@stericsson.com>
Tested-by: Henrik CARLING <henrik.carling@stericsson.com>
|