Age | Commit message (Collapse) | Author |
|
The TXMAXP and TXCSR registers were not set correctly for
the BULK OUT endpoints causing issues in Full speed in
Host mode.
ST-Ericsson Linux next: NA
ST-Ericsson ID: 367049
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: If5f3552235d8909adef4777f08d612df432d8709
Signed-off-by: supriya karanth <supriya.karanth@stericsson.com>
|
|
Connect Micro-A to phone first,Then connect device
usb session should be valid to detect the connected
device,Until host cable (micro-A) removal.
MUSB session bit is cleared when usb host cable
(Micro-A) removal from the phone,Not in case of
only device disconnection from the usb host cable.
ST-Ericsson ID: 364426
ST-Ericsson FOSS-OUT ID: NA
ST-Ericsson Linux next: NA
Signed-off-by: Thirupathi <thirupathi.chippakurthy@stericsson.com>
|
|
MUSB_TXCSR_TXPKTRDY will not get cleared if the data is not on
the bus. So, need to wait for it to clear in the DMA completion
callback.As per musb datasheet, generally mode 1 needs to be
used for data length greater than or equal to max packet size.
Bus reset happening due to scsi timeout,since in this case
should not return continue for next transfers.
ST-Ericsson ID:ER 365087
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: NA
Signed-off-by: Thirupathi <thirupathi.chippakurthy@stericsson.com>
|
|
During boot time, multiple calls are made to Link status
function by otg_set_host and otg_set_peripheral. This in
turn calls clock and regulator enabling multiple times
which creates problem with the reference count of
regulators. Hence this blocks the CPU idle since the
regulators are not released properly due to multiple acquire.
So, Link status function calls are removed from otg_set_host
and otg_set_peripheral which are not needed. The Link status
call during boot shall be handled by the ab8500_usb_boot_detect
function.
ST-Ericsson ID: 373105
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I2ead5b546273be822b3e9e9f588a1954b3fa10f2
Signed-off-by: Sakethram Bommisetti <sakethram.bommisetti@stericsson.com>
|
|
if we have more endpoints configured than
enabled on fifo_mode, then we need to be
careful on save/restore context operations,
otherwise we will try to access uninitialized
__iomem pointer.
ST-Ericsson Linux next: NA
ST-Ericsson ID: 370868, 372121
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: Iacca00fbb3b97bf6e25f7d7652dd9d53fb9adc16
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Sakethram Bommisetti <sakethram.bommisetti@stericsson.com>
|
|
In suspended state the registers are not saved and restored
properly hence back ported.
(http://git.kernel.org/?p=linux/kernel/git/gregkh/usb.git;
a=commit;h=e4e5b136eb6f2d3aa10dca108a1b787dc92d67df)
Also the code is aligned as per the latest linux-next.
ST-Ericsson ID: 366298, 368370
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: NA
Change-Id: I97ae0b055f6f1300a11190e1083349a6583f0377
Signed-off-by: maheswarudu <v.maheswarudu@stericsson.com>
|
|
Restoring the missing INDEX register value in ux500_restore_context().
without this Hub enumeration is inconsistent,
if we do multiple connect/disconnect.
ST-Ericsson ID: 364906
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: NA
Signed-off-by: Thirupathi <thirupathi.chippakurthy@stericsson.com>
|
|
Restoring the missing INDEX register value in musb_restore_context().
Without this suspend resume functionality is broken with offmode
enabled.
ST-Ericsson ID: AP 369118
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: NA
Signed-off-by: Thirupathi <thirupathi.chippakurthy@stericsson.com>
Acked-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
This will change to the u8500 wdt that uses a watchdog in the
prcmu to detect hangs on the arm side.
This is not enabled by default and will need a userspace deamon that
enables it, configure it and kicks it from time to time.
Change-Id: Ia4dc1b0d114797cd44e874f432d94a91669d28c8
Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
|
|
Snowball have the GPIO_EN on GPIO161 diffrent from u8500.
Change-Id: I6dddb1e3d7b7b80ce046fbd92a7852a3d0a6c59d
Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
|
|
Fix snowball pins for buttons also do the declaration
the same way all the other decalrations are done.
Moved the u9500 special GPIO swich to before board
variant specific GPIO
Change-Id: I9b25667d3ece4a49706b5c43c7cc7df5df3930e1
Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
|
|
Config file updates from u8500_defconfig.
Signed-off-by: John Fredriksson <john.xj.fredriksson@stericsson.com>
|
|
Updates from u8500_defconfig.
Signed-off-by: John Fredriksson <john.xj.fredriksson@stericsson.com>
|
|
The framebuffer console causes some problems with 3d graphics.
Disable it until the root cause has been found.
Signed-off-by: John Fredriksson <john.xj.fredriksson@stericsson.com>
|
|
Update according to new u8500_defconfig.
Signed-off-by: John Fredriksson <john.xj.fredriksson@stericsson.com>
|
|
Signed-off-by: John Fredriksson <john.xj.fredriksson@stericsson.com>
|
|
Signed-off-by: John Fredriksson <john.xj.fredriksson@stericsson.com>
|
|
Signed-off-by: John Fredriksson <john.xj.fredriksson@stericsson.com>
|
|
Signed-off-by: John Rigby <john.rigby@linaro.org>
|
|
HDMI AV8100 fw is updated to ver 0_3_0.
Supports chip cut version 3.0.
Fixes a TVout bug.
Signed-off-by: John Fredriksson <john.xj.fredriksson@stericsson.com>
|
|
mach-ux500: mcde: Change pixel format to RGB565 to make mali graphics work.
Signed-off-by: John Fredriksson <john.xj.fredriksson@stericsson.com>
|
|
Currently musb core PM ops does save and restore of context
The platform can enter CPU idle before the platform or
runtime suspend is called.But musb core PM ops is not aware
of CPU idle. and thus it saves and restores some junk context
Since junk context is restored there is instability in usb
functions.
ux500 USB platform file handles the save and restore properly
during cable connect and disconnent.So we don't require handling
of context save and restore in musb core and hence not registering
musb core PM ops.
ST-Ericsson Linux next: NA
ST-Ericsson ID: 370868,372121
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: Ie784c131792b686564561dc9b4bb262042e48504
Signed-off-by: rajaram <rajaram.ragupathy@stericsson.com>
|
|
Snowball V7 and above the accelerometer changed i2c address
and there is now way to detect that in runtime.
So between V7 and V10 we need to probe for the right address.
Change-Id: I39528ca40952a8a868b7aff6c3abd7668420850d
Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
|
|
Change-Id: I39f57da20017ff7e963d0001a99dd426e12c77d0
Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/35833
Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com>
|
|
Add the lps001wp as a consumer of VAUX1, the
device name is a little bad maybe have to be fixed later on.
Change-Id: Ie38b86383d5d1eac5862e3f5d999639d407702f3
Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/35832
Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com>
|
|
Change-Id: If872084fce0c37126f9196a70c0f76db1c4cf37c
Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
|
|
ST-Ericsson ID: 361885
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: Ic914e764ee4816fbfcfbba5129426e2ba51a88ab
Signed-off-by: Jayarami Reddy <jayarami.reddy@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33780
Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com>
|
|
Enable boot partitions to be power and permanently locked via
a sysfs ro_lock node.
ST-Ericsson ID: 344197
ST-Ericsson FOSS-OUT ID: Trivial
ST-Ericsson Linux next: NA
Change-Id: I5534c12b0c1867d562e27a2fb2012624ad3009b4
Signed-off-by: John Beckett <john.beckett@stericsson.com>
Signed-off-by: Johan Rudholm <johan.rudholm@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33117
Reviewed-by: Ulf HANSSON <ulf.hansson@stericsson.com>
|
|
Auto sync for command mode displays are no
longer used and should be implemented in fbdev
if needed.
ST-Ericsson ID: 365249
ST-Ericsson FOSS-OUT ID: Trivial
ST-Ericsson Linux next: NA
Change-Id: Ie67744bebf8d5b7049d055077814460959f86172
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33801
Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
Tested-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
|
|
Auto sync for command mode displays are no
longer used and should be implemented in fbdev
if needed.
ST-Ericsson ID: 365249
ST-Ericsson FOSS-OUT ID: Trivial
ST-Ericsson Linux next: NA
Change-Id: I860d9221dc79d6e5acd53c514d90a8eac57fb18a
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33800
Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
Tested-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
|
|
With this patch it is possible to set
baud rate 3.25 Mbps on CG2900 UART.
ST-Ericsson ID: 364789
ST-Ericsson FOSS-OUT ID: Trivial
ST-Ericsson Linux next: Not tested, 364789
Signed-off-by: Lukasz Rymanowski <lukasz.rymanowski@tieto.com>
Change-Id: If54af597b949038e9ef4c05d80c9235666e127a4
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32689
Reviewed-by: Lukasz RYMANOWSKI <lukasz.rymanowski@stericsson.com>
Tested-by: Lukasz RYMANOWSKI <lukasz.rymanowski@stericsson.com>
Reviewed-by: Par-Gunnar HJALMDAHL <par-gunnar.p.hjalmdahl@stericsson.com>
|
|
mcde_get_main_display is not used in the kernel.
ST-Ericsson ID: 365249
ST-Ericsson FOSS-OUT ID: Trivial
ST-Ericsson Linux next: NA
Change-Id: I86b947e1273ba0a7340cee06cfa1d7d732d064b8
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33784
Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
Tested-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
|
|
ST-Ericsson ID: 366971
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I4724b322f5fba1b4fff49abb525380b98e8801a5
Signed-off-by: Avinash A <Avinash.a@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/34062
Reviewed-by: Avinash A <avinash.a@stericsson.com>
Tested-by: Avinash A <avinash.a@stericsson.com>
Reviewed-by: QABUILD
Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com>
|
|
The cyttsp driver dont have proper ifdefs around
EARLYSUSPEND code.
Change-Id: I03ae51f6b2593ce5cfa601158477eeb485e9f82b
Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
|
|
During APE-Modem communication, for some reasson if software or hardware
fails, instead of calling kernel function BUG() and halting the system
making it no more useful until reboot, initiate a MSR.
ST-Ericsson Linux next: NA
ST-Ericsson ID: 366150
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I59e93b338c3242b506be7775487be065421022b8
Signed-off-by: Arun Murthy <arun.murthy@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33416
Reviewed-by: Bibek BASU <bibek.basu@stericsson.com>
Reviewed-by: QABUILD
Reviewed-by: Magnus TEMPLING <magnus.templing@stericsson.com>
Reviewed-by: Rickard EVERTSSON <rickard.evertsson@stericsson.com>
Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
|
|
Now the battery capacity calculations and the power_supply framework
is updated with the new status when battery has been fully charged
before clients polling the capacity sysfs node are being notified.
ST-Ericsson ID: 358829
ST-Ericsson Linux next: Not tested
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: Icd827863bc694e44495487f8536e95ab5fe0714f
Signed-off-by: Kalle Komierowski <karl.komierowski@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33880
Reviewed-by: QABUILD
Reviewed-by: Johan PALSSON <johan.palsson@stericsson.com>
|
|
This enables audio in u5500_defconfig
ST-Ericsson ID: 362962
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I32d8a1b130fcbd962551f3f4d1aa22b7d414062e
Signed-off-by: Shyam Krishnan M <shyam.moni@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33805
Reviewed-by: QABUILD
Reviewed-by: Ganesh V <ganesh.v@stericsson.com>
Tested-by: Ganesh V <ganesh.v@stericsson.com>
Reviewed-by: Basavaprabhu BANDI <basavaprabhu.bandi@stericsson.com>
Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
|
|
This adds the correct supply name for the
Cypress Touchscreen controller
ST-Ericsson ID: 366971
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I7b1cc31220059edf946ead080a9ad1321d6277f2
Signed-off-by: Avinash A <Avinash.a@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33832
Reviewed-by: Avinash A <avinash.a@stericsson.com>
Tested-by: Avinash A <avinash.a@stericsson.com>
Reviewed-by: QABUILD
Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
|
|
pins.h didn't include <plat/pincfg.h> eventhough it used stuff
from there.
ST-Ericsson Linux next: -
ST-Ericsson ID: -
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I120b2814118aa43323c95f429793a135af6a68d6
Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33424
Reviewed-by: QABUILD
Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com>
|
|
PIN_SLPM_WAKEUP_ENABLE/DISABLE do something completely different
than the name says.
ST-Ericsson Linux next: -
ST-Ericsson ID: -
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: Ib334d2772fa21f58ee84f22dddf34830300a4f86
Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33865
Reviewed-by: QABUILD
Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com>
|
|
Change-Id: Ib874ec36ebd2847aa3ab25fca119a82000ed6918
Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33027
Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
Reviewed-by: QABUILD
|
|
Due to problem with multiple insertion of SD card in DMA mode
the dma support for SD cad is disabled temporarily.
ST-Ericsson Id: ER 365282
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: Ic4bf04f5b3a7d4fe8c2e1d18be11308f5e7eb108
Signed-off-by: Hanumath Prasad <hanumath.prasad@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33785
Reviewed-by: QABUILD
Reviewed-by: Preetham-rao K <preetham.rao@stericsson.com>
Reviewed-by: Ulf HANSSON <ulf.hansson@stericsson.com>
Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
|