summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-05-22init:boottime: Increase static entriestrace-debugJonas Aaberg
Increase the number of static entries from 16 to 32 to be enough room for all measure points taken before kmalloc can be used. ST-Ericsson Linux next: - ST-Ericsson ID: 370799 ST-Ericsson FOSS-OUT ID: Trivial Change-Id: Ie4326169e56070de4c8b749d3b4e531269983553 Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/50937 Reviewed-by: QABUILD Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2012-05-22stm: mach-ux500: Update U8520 SD-card GPIO pinsJohan Rudholm
ST-Ericsson ID: 371953 Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com>
2012-05-22stm: ux500: Add U8520 machineBengt Jonsson
ST-Ericsson ID: 371953 Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com>
2012-05-22stm: mach-ux500: Add support for 9540Yann Gautier
ST-Ericsson ID: 398896 Signed-off-by: Yann Gautier <yann.gautier@stericsson.com>
2012-05-22mach-ux500: hwreg adaptation for u9540Michel JAOUEN
ST-Ericsson ID: 409625 ST-Ericsson FOSS-OUT ID: trivial ST-Ericsson Linux next: NA Depends-On: Iff4121811d2afbf581eec0905077c58bff96ce09 Change-Id: I121bd0f9732342ae5e6753e840473a618e1f3d9f Signed-off-by: Michel JAOUEN <michel.jaouen@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/45316 Reviewed-by: QATOOLS Reviewed-by: QABUILD Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
2012-05-22boottime: Port to new 3.3 cpustat interfacePhilippe Langlais
Signed-off-by: Philippe Langlais <philippe.langlais@stericsson.com>
2012-05-22u8500 : misc : stm driver not functionalBibek Basu
configure stm mode to software to fix the broken driver ST-Ericsson Linux next: NA ST-Ericsson ID: 373611 ST-Ericsson FOSS-OUT ID: Trivial Signed-off-by: Bibek Basu <bibek.basu@stericsson.com> Change-Id: Ib1349cfea5a4d3143d232a0ff3fe1e93820c6439 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/40440 Reviewed-by: QABUILD Reviewed-by: Anil KUMAR (STE) <anil.kumar@stericsson.com> Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com>
2012-05-22hwreg: ux500: Coding style fixesPhilippe Langlais
Fix the most obvious violations of the kernel coding style Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
2012-05-22stm: Add include linux/types.hPhilippe Langlais
Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org>
2012-05-22ARM: u8500: Add control for modem and ape traceJurijs Soloveckis
SD-card, mipi34 and mipi60 IFs can be configured for modem or ape trace, using u-boot cmd prompt. STM drv is controlled via kernel environment vars: Example: stm.microsd=[none|modem|ape], or stm.mipi34=[none|modem|ape], or stm.mipi60=[none|modem|ape] If trace set to ape, use stm.stm_ter=N to init STM_TER reg with decimal value N (default: N=0). ST-Ericsson ID: 349677 ST-Ericsson Linux next: N/A ST-Ericsson FOSS-OUT ID: Trivial Change-Id: Ie04e4c004417c4542259e3074f1fa2fd4f00ce6d Depends-On: I7bbcf263b83338d7b05413dd9dc0ac2ec4880601 Signed-off-by: Jurijs Soloveckis <jurijs.soloveckis@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/34160 Reviewed-by: QATOOLS Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
2012-05-22mach-ux500: stm: u8500: API for PRCMU_GPIOCR registerPhilippe Langlais
The PRCMU_GPIOCR register modification within STM driver is implemented via corresponding API functions. ST-Ericsson ID: 349677 ST-Ericsson Linux next: N/A ST-Ericsson FOSS-OUT ID: Trivial Signed-off-by: Jurijs Soloveckis <jurijs.soloveckis@stericsson.com>
2012-05-22mach-ux500: STM: break bad dependency with hsiPhilippe Langlais
Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org>
2012-05-22misc: stm: Compile System Trace Module misc driverPhilippe Langlais
Signed-off-by: Philippe Langlais <philippe.langlais@stericsson.com>
2012-05-22ARM: u8500: STM: board depended code splitJurijs Soloveckis
Hardware depended code for STM device is moved to the separate file. ST-Ericsson ID: 349677 ST-Ericsson Linux next: N/A ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I5d3d0e069b0e8929b99fcfe9cb5e37a950caf716 Signed-off-by: Jurijs Soloveckis <jurijs.soloveckis@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32847 Reviewed-by: Pierre PEIFFER <pierre.peiffer@stericsson.com> Reviewed-by: Sebastian RASMUSSEN <sebastian.rasmussen@stericsson.com> Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
2012-05-22printk: don't use CONFIG_DEBUG_LLRabin Vincent
Change-Id: I1e3cf9a0e67c7941ec9a276678dcb61c01a2a957
2012-05-22ARM: ux500: hwreg: Tiny code clean-upJonas Aaberg
ST-Ericsson Linux next: Not tested, ask SSM for ER ST-Ericsson ID: - ST-Ericsson FOSS-OUT ID: Trivial Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Change-Id: I5b7331fade22ae99dc2600d67b41bf286179cee8 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/25489 Reviewed-by: QATEST Reviewed-by: Linus WALLEIJ <linus.walleij@stericsson.com>
2012-05-22Boottime - A tool for automatic measurement of kernel and possible boot ↵Jonas Aaberg
loader boot time. The overhead is very low and the results will be found under sysfs/bootime, as well as detailed results in debugfs under boottime/. The bootgraph* files are compatible with scripts/bootgraph.pl. The reason for this patch is to provide data (sysfs/boottime) suitable for automatic testcases as well as help for developers to reduce the boot time (debugfs). Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/2760 Change-Id: Id8ea7226b3f1f783448962195193b90699d32fc6 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/3174 Tested-by: Mian Yousaf KAUKAB <mian.yousaf.kaukab@stericsson.com> Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com> Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-05-22ARM: ux500: hwreg debugfs: access DB8500 registers from debugfs entriesPhilippe Langlais
Patch used for test purpose only. It is not plan to mainline it. Create debugfs entries to read/write specific DB8500 physical addresses. This is quite useless since devmem allows this userland access. However, debugfs entries are easier for scripting purpose. Check the debugfs entries usage from heading comments in hwreg.c ST-Ericsson Linux next: Not to be mainlined ST-Ericsson ID: - ST-Ericsson FOSS-OUT ID: Trivial Change-Id: Id202562030a144d5c2c1aaa3e67e7f4de60c2cb2 Signed-off-by: carriere etienne <etienne.carriere@stericsson.com> Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/17831
2012-05-22stm: warning fixPhilippe Langlais
Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org>
2012-05-22ftrace: Increase number of named processesJonas Aaberg
The default setting of 128 is not close to enough to save all the names of processes/threads executed during 1s of idle in Android. ST-Ericsson Linux next: - ST-Ericsson ID: - ST-Ericsson FOSS-OUT ID: Trivial Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Change-Id: I6f9ef8d5f167f4b1f8de7b996130e65ee5fc7598 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/15157 Reviewed-by: Martin PERSSON <martin.persson@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2012-05-22arm: add printascii in printk optionRabin Vincent
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Change-Id: Ie73cf9782ccbf3a974383fa5d1474613c660c6b9 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/3172 Tested-by: Mian Yousaf KAUKAB <mian.yousaf.kaukab@stericsson.com> Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com> Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
2012-05-22ARM: Make low-level printk workTony Lindgren
Makes low-level printk work. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
2012-05-22trace: add STM trace hooks for printk, trace_printk, trace_function, stack ↵Philippe Langlais
trace and scheduler wakeup/context switch tracing Change-Id: I6621cfceccc4f000e9196d2d8909f0493d5d4774 Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org> Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
2012-05-22STM: MIPI System Trace Module char driverPhilippe Langlais
Change-Id: I5a53335d41ac1ecda02dc61d68a418a0039ebdff Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org> Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
2012-05-20Linux 3.4v3.4Linus Torvalds
2012-05-19Merge tag 'parisc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6 Pull PA-RISC fixes from James Bottomley: "This is a set of three bug fixes that gets parisc running again on systems with PA1.1 processors. Two fix regressions introduced in 2.6.39 and one fixes a prefetch bug that only affects PA7300LC processors. We also have another pending fix to do with the sectional arrangement of vmlinux.lds, but there's a query on it during testing on one particular system type, so I'll hold off sending it in for now." * tag 'parisc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6: [PARISC] fix panic on prefetch(NULL) on PA7300LC [PARISC] fix crash in flush_icache_page_asm on PA1.1 [PARISC] fix PA1.1 oops on boot
2012-05-19Merge branch 'x86/ld-fix' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 linker bug workarounds from Peter Anvin. GNU ld-2.22.52.0.[12] (*) has an unfortunate bug where it incorrectly turns certain relocation entries absolute. Section-relative symbols that are part of otherwise empty sections are silently changed them to absolute. We rely on section-relative symbols staying section-relative, and actually have several sections in the linker script solely for this purpose. See for example http://sourceware.org/bugzilla/show_bug.cgi?id=14052 We could just black-list the buggy linker, but it appears that it got shipped in at least F17, and possibly other distros too, so it's sadly not some rare unusual case. This backports the workaround from the x86/trampoline branch, and as Peter says: "This is not a minimal fix, not at all, but it is a tested code base." * 'x86/ld-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, relocs: When printing an error, say relative or absolute x86, relocs: Workaround for binutils 2.22.52.0.1 section bug x86, realmode: 16-bit real-mode code support for relocs tool (*) That's a manly release numbering system. Stupid, sure. But manly.
2012-05-19Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block layer fixes from Jens Axboe: "A few small, but important fixes. Most of them are marked for stable as well - Fix failure to release a semaphore on error path in mtip32xx. - Fix crashable condition in bio_get_nr_vecs(). - Don't mark end-of-disk buffers as mapped, limit it to i_size. - Fix for build problem with CONFIG_BLOCK=n on arm at least. - Fix for a buffer overlow on UUID partition printing. - Trivial removal of unused variables in dac960." * 'for-linus' of git://git.kernel.dk/linux-block: block: fix buffer overflow when printing partition UUIDs Fix blkdev.h build errors when BLOCK=n bio allocation failure due to bio_get_nr_vecs() block: don't mark buffers beyond end of disk as mapped mtip32xx: release the semaphore on an error path dac960: Remove unused variables from DAC960_CreateProcEntries()
2012-05-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull one more networking bug-fix from David Miller: "One last straggler. Eric Dumazet's pktgen unload oops fix was not entirely complete, but all the cases should be handled properly now.... fingers crossed." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: pktgen: fix module unload for good
2012-05-19memcg,thp: fix res_counter:96 regressionHugh Dickins
Occasionally, testing memcg's move_charge_at_immigrate on rc7 shows a flurry of hundreds of warnings at kernel/res_counter.c:96, where res_counter_uncharge_locked() does WARN_ON(counter->usage < val). The first trace of each flurry implicates __mem_cgroup_cancel_charge() of mc.precharge, and an audit of mc.precharge handling points to mem_cgroup_move_charge_pte_range()'s THP handling in commit 12724850e806 ("memcg: avoid THP split in task migration"). Checking !mc.precharge is good everywhere else, when a single page is to be charged; but here the "mc.precharge -= HPAGE_PMD_NR" likely to follow, is liable to result in underflow (a lot can change since the precharge was estimated). Simply check against HPAGE_PMD_NR: there's probably a better alternative, trying precharge for more, splitting if unsuccessful; but this one-liner is safer for now - no kernel/res_counter.c:96 warnings seen in 26 hours. Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-18x86, relocs: When printing an error, say relative or absoluteH. Peter Anvin
When the relocs tool throws an error, let the error message say if it is an absolute or relative symbol. This should make it a lot more clear what action the programmer needs to take and should help us find the reason if additional symbol bugs show up. Signed-off-by: H. Peter Anvin <hpa@zytor.com> Cc: <stable@vger.kernel.org>
2012-05-18x86, relocs: Workaround for binutils 2.22.52.0.1 section bugH. Peter Anvin
GNU ld 2.22.52.0.1 has a bug that it blindly changes symbols from section-relative to absolute if they are in a section of zero length. This turns the symbols __init_begin and __init_end into absolute symbols. Let the relocs program know that those should be treated as relative symbols. Reported-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Cc: H.J. Lu <hjl.tools@gmail.com> Cc: <stable@vger.kernel.org> Cc: Jarkko Sakkinen <jarkko.sakkinen@intel.com>
2012-05-18x86, realmode: 16-bit real-mode code support for relocs toolH. Peter Anvin
A new option is added to the relocs tool called '--realmode'. This option causes the generation of 16-bit segment relocations and 32-bit linear relocations for the real-mode code. When the real-mode code is moved to the low-memory during kernel initialization, these relocation entries can be used to relocate the code properly. In the assembly code 16-bit segment relocations must be relative to the 'real_mode_seg' absolute symbol. Linear relocations must be relative to a symbol prefixed with 'pa_'. 16-bit segment relocation is used to load cs:ip in 16-bit code. Linear relocations are used in the 32-bit code for relocatable data references. They are declared in the linker script of the real-mode code. The relocs tool is moved to arch/x86/tools/relocs.c, and added new target archscripts that can be used to build scripts needed building an architecture. be compiled before building the arch/x86 tree. [ hpa: accelerating this because it detects invalid absolute relocations, a serious bug in binutils 2.22.52.0.x which currently produces bad kernels. ] Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Link: http://lkml.kernel.org/r/1336501366-28617-2-git-send-email-jarkko.sakkinen@intel.com Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@intel.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: <stable@vger.kernel.org>
2012-05-18Merge tag 'dm-3.4-fixes-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm Pull a dm fix from Alasdair G Kergon: "A fix to the thin provisioning userspace interface." * tag 'dm-3.4-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm: dm thin: fix table output when pool target disables discard passdown internally
2012-05-19dm thin: fix table output when pool target disables discard passdown internallyMike Snitzer
When the thin pool target clears the discard_passdown parameter internally, it incorrectly changes the table line reported to userspace. This breaks dumb string comparisons on these table lines in generic userspace device-mapper library code and leads to tables being reloaded repeatedly when nothing is actually meant to be changing. This patch corrects this by no longer changing the table line when discard passdown was disabled. We can still tell when discard passdown is overridden by looking for the message "Discard unsupported by data device (sdX): Disabling discard passdown." This automatic detection is also moved from the 'load' to the 'resume' so that it is re-evaluated should the properties of underlying devices change. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-05-18Merge tag 'md-3.4-fixes' of git://neil.brown.name/mdLinus Torvalds
Pull one more md bugfix from NeilBrown: "Fix bug in recent fix to RAID10. Without this patch, recovery will crash" * tag 'md-3.4-fixes' of git://neil.brown.name/md: md/raid10: fix transcription error in calc_sectors conversion.
2012-05-18Merge branch 'stable' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile Pull tile tree bugfix from Chris Metcalf: "This fixes a security vulnerability (and correctness bug) in tilegx" * 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: tilegx: enable SYSCALL_WRAPPERS support
2012-05-19md/raid10: fix transcription error in calc_sectors conversion.NeilBrown
The old code was sector_div(stride, fc); the new code was sector_dir(size, conf->near_copies); 'size' is right (the stride various wasn't really needed), but 'fc' means 'far_copies', and that is an important difference. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-18Merge branch 'akpm' (Andrew's patch-bomb)Linus Torvalds
Merge misc fixes from Andrew Morton. * emailed from Andrew Morton <akpm@linux-foundation.org>: (4 patches) frv: delete incorrect task prototypes causing compile fail slub: missing test for partial pages flush work in flush_all() fs, proc: fix ABBA deadlock in case of execution attempt of map_files/ entries drivers/rtc/rtc-pl031.c: configure correct wday for 2000-01-01
2012-05-18proc: move fd symlink i_mode calculations into tid_fd_revalidate()Linus Torvalds
Instead of doing the i_mode calculations at proc_fd_instantiate() time, move them into tid_fd_revalidate(), which is where the other inode state (notably uid/gid information) is updated too. Otherwise we'll end up with stale i_mode information if an fd is re-used while the dentry still hangs around. Not that anything really *cares* (symlink permissions don't really matter), but Tetsuo Handa noticed that the owner read/write bits don't always match the state of the readability of the file descriptor, and we _used_ to get this right a long time ago in a galaxy far, far away. Besides, aside from fixing an ugly detail (that has apparently been this way since commit 61a28784028e: "proc: Remove the hard coded inode numbers" in 2006), this removes more lines of code than it adds. And it just makes sense to update i_mode in the same place we update i_uid/gid. Al Viro correctly points out that we could just do the inode fill in the inode iops ->getattr() function instead. However, that does require somewhat slightly more invasive changes, and adds yet *another* lookup of the file descriptor. We need to do the revalidate() for other reasons anyway, and have the file descriptor handy, so we might as well fill in the information at this point. Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Eric Biederman <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-18pktgen: fix module unload for goodEric Dumazet
commit c57b5468406 (pktgen: fix crash at module unload) did a very poor job with list primitives. 1) list_splice() arguments were in the wrong order 2) list_splice(list, head) has undefined behavior if head is not initialized. 3) We should use the list_splice_init() variant to clear pktgen_threads list. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-18tilegx: enable SYSCALL_WRAPPERS supportChris Metcalf
Some discussion with the glibc mailing lists revealed that this was necessary for 64-bit platforms with MIPS-like sign-extension rules for 32-bit values. The original symptom was that passing (uid_t)-1 to setreuid() was failing in programs linked -pthread because of the "setxid" mechanism for passing setxid-type function arguments to the syscall code. SYSCALL_WRAPPERS handles ensuring that all syscall arguments end up with proper sign-extension and is thus the appropriate fix for this problem. On other platforms (s390, powerpc, sparc64, and mips) this was fixed in 2.6.28.6. The general issue is tracked as CVE-2009-0029. Cc: <stable@vger.kernel.org> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-05-18Merge tag 'linus-mce-fix' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras Pull a machine check recovery fix from Tony Luck. I really don't like how the MCE code does some of the things it does, but this does seem to be an improvement. * tag 'linus-mce-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: x86/mce: Only restart instruction after machine check recovery if it is safe
2012-05-17frv: delete incorrect task prototypes causing compile failPaul Gortmaker
Commit 41101809a865 ("fork: Provide weak arch_release_[task_struct| thread_info] functions") in -tip highlights a problem in the frv arch, where it has needles prototypes for alloc_task_struct_node and free_task_struct. This now shows up as: kernel/fork.c:120:66: error: static declaration of 'alloc_task_struct_node' follows non-static declaration kernel/fork.c:127:51: error: static declaration of 'free_task_struct' follows non-static declaration since that commit turned them into real functions. Since arch/frv does does not define define __HAVE_ARCH_TASK_STRUCT_ALLOCATOR (i.e. it just uses the generic ones) it shouldn't list these at all. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: David Howells <dhowells@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-17slub: missing test for partial pages flush work in flush_all()majianpeng
I found some kernel messages such as: SLUB raid5-md127: kmem_cache_destroy called for cache that still has objects. Pid: 6143, comm: mdadm Tainted: G O 3.4.0-rc6+ #75 Call Trace: kmem_cache_destroy+0x328/0x400 free_conf+0x2d/0xf0 [raid456] stop+0x41/0x60 [raid456] md_stop+0x1a/0x60 [md_mod] do_md_stop+0x74/0x470 [md_mod] md_ioctl+0xff/0x11f0 [md_mod] blkdev_ioctl+0xd8/0x7a0 block_ioctl+0x3b/0x40 do_vfs_ioctl+0x96/0x560 sys_ioctl+0x91/0xa0 system_call_fastpath+0x16/0x1b Then using kmemleak I found these messages: unreferenced object 0xffff8800b6db7380 (size 112): comm "mdadm", pid 5783, jiffies 4294810749 (age 90.589s) hex dump (first 32 bytes): 01 01 db b6 ad 4e ad de ff ff ff ff ff ff ff ff .....N.......... ff ff ff ff ff ff ff ff 98 40 4a 82 ff ff ff ff .........@J..... backtrace: kmemleak_alloc+0x21/0x50 kmem_cache_alloc+0xeb/0x1b0 kmem_cache_open+0x2f1/0x430 kmem_cache_create+0x158/0x320 setup_conf+0x649/0x770 [raid456] run+0x68b/0x840 [raid456] md_run+0x529/0x940 [md_mod] do_md_run+0x18/0xc0 [md_mod] md_ioctl+0xba8/0x11f0 [md_mod] blkdev_ioctl+0xd8/0x7a0 block_ioctl+0x3b/0x40 do_vfs_ioctl+0x96/0x560 sys_ioctl+0x91/0xa0 system_call_fastpath+0x16/0x1b This bug was introduced by commit a8364d5555b ("slub: only IPI CPUs that have per cpu obj to flush"), which did not include checks for per cpu partial pages being present on a cpu. Signed-off-by: majianpeng <majianpeng@gmail.com> Cc: Gilad Ben-Yossef <gilad@benyossef.com> Acked-by: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Tested-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-17fs, proc: fix ABBA deadlock in case of execution attempt of map_files/ entriesCyrill Gorcunov
map_files/ entries are never supposed to be executed, still curious minds might try to run them, which leads to the following deadlock ====================================================== [ INFO: possible circular locking dependency detected ] 3.4.0-rc4-24406-g841e6a6 #121 Not tainted ------------------------------------------------------- bash/1556 is trying to acquire lock: (&sb->s_type->i_mutex_key#8){+.+.+.}, at: do_lookup+0x267/0x2b1 but task is already holding lock: (&sig->cred_guard_mutex){+.+.+.}, at: prepare_bprm_creds+0x2d/0x69 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&sig->cred_guard_mutex){+.+.+.}: validate_chain+0x444/0x4f4 __lock_acquire+0x387/0x3f8 lock_acquire+0x12b/0x158 __mutex_lock_common+0x56/0x3a9 mutex_lock_killable_nested+0x40/0x45 lock_trace+0x24/0x59 proc_map_files_lookup+0x5a/0x165 __lookup_hash+0x52/0x73 do_lookup+0x276/0x2b1 walk_component+0x3d/0x114 do_last+0xfc/0x540 path_openat+0xd3/0x306 do_filp_open+0x3d/0x89 do_sys_open+0x74/0x106 sys_open+0x21/0x23 tracesys+0xdd/0xe2 -> #0 (&sb->s_type->i_mutex_key#8){+.+.+.}: check_prev_add+0x6a/0x1ef validate_chain+0x444/0x4f4 __lock_acquire+0x387/0x3f8 lock_acquire+0x12b/0x158 __mutex_lock_common+0x56/0x3a9 mutex_lock_nested+0x40/0x45 do_lookup+0x267/0x2b1 walk_component+0x3d/0x114 link_path_walk+0x1f9/0x48f path_openat+0xb6/0x306 do_filp_open+0x3d/0x89 open_exec+0x25/0xa0 do_execve_common+0xea/0x2f9 do_execve+0x43/0x45 sys_execve+0x43/0x5a stub_execve+0x6c/0xc0 This is because prepare_bprm_creds grabs task->signal->cred_guard_mutex and when do_lookup happens we try to grab task->signal->cred_guard_mutex again in lock_trace. Fix it using plain ptrace_may_access() helper in proc_map_files_lookup() and in proc_map_files_readdir() instead of lock_trace(), the caller must be CAP_SYS_ADMIN granted anyway. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Reported-by: Sasha Levin <levinsasha928@gmail.com> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Dave Jones <davej@redhat.com> Cc: Vasiliy Kulikov <segoon@openwall.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-17drivers/rtc/rtc-pl031.c: configure correct wday for 2000-01-01Rajkumar Kasirajan
The reset date of the ST Micro version of PL031 is 2000-01-01. The correct weekday for 2000-01-01 is saturday, but pl031 is initialized to sunday. This may lead to alarm malfunction, so configure the correct wday if RTC_DR indicates reset. Signed-off-by: Rajkumar Kasirajan <rajkumar.kasirajan@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Mattias Wallin <mattias.wallin@stericsson.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-17Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: "Small set of fixes again." * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7419/1: vfp: fix VFP flushing regression on sigreturn path ARM: 7418/1: LPAE: fix access flag setup in mem_type_table ARM: prevent VM_GROWSDOWN mmaps extending below FIRST_USER_ADDRESS ARM: 7417/1: vfp: ensure preemption is disabled when enabling VFP access
2012-05-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull two networking fixes from David S. Miller: 1) Thanks to Willy Tarreau and Eric Dumazet, we've unlocked a bug that's been present in do_tcp_sendpages() since that function was written in 2002. When we block to wait for memory we have to unconditionally try and push out pending TCP data, otherwise we can block for an unreasonably long amount of time. 2) Fix deadlock in e1000, fixes kernel bugzilla 43132 From Tushar Dave. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: e1000: Prevent reset task killing itself. tcp: do_tcp_sendpages() must try to push data out on oom conditions
2012-05-17ACPI / PCI / PM: Fix device PM regression related to D3hot/D3coldRafael J. Wysocki
Commit 1cc0c998fdf2 ("ACPI: Fix D3hot v D3cold confusion") introduced a bug in __acpi_bus_set_power() and changed the behavior of acpi_pci_set_power_state() in such a way that it generally doesn't work as expected if PCI_D3hot is passed to it as the second argument. First off, if ACPI_STATE_D3 (equal to ACPI_STATE_D3_COLD) is passed to __acpi_bus_set_power() and the explicit_set flag is set for the D3cold state, the function will try to execute AML method called "_PS4", which doesn't exist. Fix this by adding a check to ensure that the name of the AML method to execute for transitions to ACPI_STATE_D3_COLD is correct in __acpi_bus_set_power(). Also make sure that the explicit_set flag for ACPI_STATE_D3_COLD will be set if _PS3 is present and modify acpi_power_transition() to avoid accessing power resources for ACPI_STATE_D3_COLD, because they don't exist. Second, if PCI_D3hot is passed to acpi_pci_set_power_state() as the target state, the function will request a transition to ACPI_STATE_D3_HOT instead of ACPI_STATE_D3. However, ACPI_STATE_D3_HOT is now only marked as supported if the _PR3 AML method is defined for the given device, which is rare. This causes problems to happen on systems where devices were successfully put into ACPI D3 by pci_set_power_state(PCI_D3hot) which doesn't work now. In particular, some unused graphics adapters are not turned off as a result. To fix this issue restore the old behavior of acpi_pci_set_power_state(), which is to request a transition to ACPI_STATE_D3 (equal to ACPI_STATE_D3_COLD) if either PCI_D3hot or PCI_D3cold is passed to it as the argument. This approach is not ideal, because generally power should not be removed from devices if PCI_D3hot is the target power state, but since this behavior is relied on, we have no choice but to restore it at the moment and spend more time on designing a better solution in the future. References: https://bugzilla.kernel.org/show_bug.cgi?id=43228 Reported-by: rocko <rockorequin@hotmail.com> Reported-by: Cristian Rodríguez <crrodriguez@opensuse.org> Reported-and-tested-by: Peter <lekensteyn@gmail.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-05-14 00:45:36 +0000