Age | Commit message (Collapse) | Author |
|
Signed-off-by: ramesh.chandrasekaran <ramesh.chandrasekaran@stericsson.com>
|
|
Adding 'inline' before a function requires that the
body be provided in the same file when using gcc 4.7.
Signed-off-by: Bernhard Rosenkranzer <bernhard.rosenkranzer@linaro.org>
Committed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
A small fallout from Vinod's conversions to dma_transfer_direction,
this small comparison was done with a dma_data_direction instead.
Fix it by comparing against the correct enum.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
stable-linux-ux500-3.3
Conflicts:
drivers/Kconfig
|
|
Enable "Headset left" and "Headset Right" ALSA options by default
Signed-off-by: ramesh.chandrasekaran <ramesh.chandrasekaran@stericsson.com>
|
|
By disbaling the suspend we could avoid the hangs in suspend and resume.
This workaround will be removed once the power management supports
for all other peripheral drivers.
Signed-off-by: Naveen Kumar Gaddipati <naveen.gaddipati@stericsson.com>
|
|
On snwoball V5 and up GPIO161 is routed to PMU_EN of the cg2900
and as such shouldn't be configured to handle an event from the
external connector (J23).
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
Snowball have the GPIO_EN on GPIO161 diffrent from u8500.
Change-Id: I6dddb1e3d7b7b80ce046fbd92a7852a3d0a6c59d
Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
|
|
This is a workaround, till there is an explanation why
this don't work on Snowball
Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org>
|
|
There are conflicts with Snowball GPIOs
Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org>
|
|
Signed-off-by: Jon Medhurst <tixy@linaro.org>
|
|
Signed-off-by: Jon Medhurst <tixy@linaro.org>
|
|
Signed-off-by: Jon Medhurst <tixy@linaro.org>
|
|
Some meminfo tracepoint APIs were renamed in commit b413d48a
(mm-tracepoint: rename page-free events)
Signed-off-by: Wade Cherry <wade.cherry@arm.com>
Signed-off-by: Jon Medhurst <tixy@linaro.org>
|
|
Signed-off-by: Jon Medhurst <tixy@linaro.org>
|
|
In certain circumstances counter were not enabled correctly. Fixed.
Signed-off-by: Wade Cherry <wade.cherry@arm.com>
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Jon Medhurst <tixy@linaro.org>
|
|
Signed-off-by: Jon Medhurst <tixy@linaro.org>
|
|
After Jimmy Rubin commit "video: mcde: Add dsi/dpi freq settings",
HDMI framebuffer is no more functional, hence this workaround.
Signed-off-by: Philippe Langlais <philippe.langlais@stericsson.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Signed-off-by: Kejun ZHOU <kejun.zhou@linaro.org>
Committer: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
With this patch it is possible to retrieve sec_level from the kernel by
user space. This is needed for SAP working on hciops.
This patch missed to be added when moving to kernel 3.0
ST-Ericsson ID: 256270
ST-Ericsson FOSS-OUT ID: FOSS-OUT-10060
Change-Id: Ic569db392e6f6ee2e546003dec86cc2d62a1fcd7
Signed-off-by: Lukasz Rymanowski <lukasz.rymanowski@tieto.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/42169
Reviewed-by: Lukasz RYMANOWSKI <lukasz.rymanowski@stericsson.com>
Tested-by: Lukasz RYMANOWSKI <lukasz.rymanowski@stericsson.com>
Reviewed-by: Hakan GARDRUP <hakan.gardrup@stericsson.com>
Reviewed-by: Henrik POSSUNG <henrik.possung@stericsson.com>
Reviewed-by: Kanak GUPTA <kanak.gupta@stericsson.com>
|
|
Adds ability to setup SCO connection parameters through socket option.
ST-Ericsson Linux next: Not tested, ER 256277
ST-Ericsson ID: 256277
ST-Ericsson FOSS-OUT ID: STETL-FOSS-OUT-10137
Change-Id: If859341019fd9f7cc7c0efe95750779e84fac801
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@tieto.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/30136
Reviewed-by: Par-Gunnar HJALMDAHL <par-gunnar.p.hjalmdahl@stericsson.com>
Tested-by: Par-Gunnar HJALMDAHL <par-gunnar.p.hjalmdahl@stericsson.com>
Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
|
|
Adds handling of extension headers to BNEP control packets.
Adds support for BNEP setup connection request handled in pand.
ST-Ericsson Linux next: -
ST-Ericsson ID: 328144
ST-Ericsson FOSS-OUT-ID: Trivial
Depends-On: Id2cbd106af9b380f63d87ea0b4652ec6cd996fa4
Change-Id: I005e00e2fe934dc19f40533953d5b233676f0d0e
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@tieto.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/18117
Reviewed-by: Par-Gunnar HJALMDAHL <par-gunnar.p.hjalmdahl@stericsson.com>
Reviewed-by: Lukasz RYMANOWSKI <lukasz.rymanowski@stericsson.com>
Reviewed-by: Henrik POSSUNG <henrik.possung@stericsson.com>
|
|
There are 6 buffers and each buffer can be filled with 10 messages. The
size of each buffer is 8k. In shm tx work function, 10 messages are written
to the buffer, if the buffer gets filled during writing these 10 messages
stop writing to buffer and use the next buffer.
ST-Ericsson Linux next: NA
ST-Ericsson ID: 375088
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I146d41e4e415c8ff96c605b4c20546ff7501442a
Signed-off-by: Arun Murthy <arun.murthy@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/43350
Reviewed-by: Durga Prasada Rao BATHINA <durgaprasadarao.b@stericsson.com>
Reviewed-by: QABUILD
Reviewed-by: Sjur BRENDELAND <sjur.brandeland@stericsson.com>
|
|
replace work queue with kthread workqueue for which the priority can be
increased. Priority has to be increased, because ideally there the control
information on flow ctrl i.e ON or OFF should reach caif with no delay.
ST-Ericsson Linux next: NA
ST-Ericsson ID: 372652
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I7a148b3277bcc885ade810df12b47c609a631e21
Signed-off-by: Arun Murthy <arun.murthy@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/42835
Reviewed-by: Hemant-vilas RAMDASI <hemant.ramdasi@stericsson.com>
Reviewed-by: QABUILD
Reviewed-by: QATEST
Reviewed-by: Sjur BRENDELAND <sjur.brandeland@stericsson.com>
Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
|
|
In the shm tx work function caif flow control is turned ON and without
acquiring the spin lock. In the rx callback cail flow control is turned
off. The expected sequence would be on caif writing message to modem
via shm, if shm finds that there is no empty space then, it is not sets
caif flow control to OFF. On shm receiving messages from modem, it sets
caif flow control to ON. Now this since this is in interrupt context, there
are chances of this fucntion being preeempted by the caif OFF that is being
set in the tx work function.
Hence create a seperate workqueue and two work functions to turn caif flow
control ON and OFF. With this implementation it is ensured that caif flow
control is turned OFF first by tx work function and turned ON by the rx
callback.
ST-Ericsson Linux next: NA
ST-Ericsson ID: 372652
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: Ide75415233d7b4560faf25862876c15421df7c2c
Signed-off-by: Arun Murthy <arun.murthy@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/42438
Reviewed-by: QABUILD
Reviewed-by: Hemant-vilas RAMDASI <hemant.ramdasi@stericsson.com>
Reviewed-by: Sjur BRENDELAND <sjur.brandeland@stericsson.com>
|
|
Some added blank line and BUGON for CAIF serial.
Change-Id: If3452ed104b93203fc86fe6a95fd957946447876
Signed-off-by: Erwan Bracq <erwan.bracq@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/21527
Reviewed-by: QATEST
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
|
|
Configure channel priority when configuring HSI interface.
ST-Ericsson Linux next: N/A
ST-Ericsson ID: 365662
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I9880ee8d118dd8fefe7dc8ee46814ee1862cfac8
Signed-off-by: Derek Morton <derek.morton@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/42229
Reviewed-by: Christopher BLAIR <chris.blair@stericsson.com>
Reviewed-by: QATOOLS
Reviewed-by: QABUILD
Reviewed-by: Pawel SZYSZUK <pawel.szyszuk@stericsson.com>
Reviewed-by: Andrew LYNN <andrew.lynn@stericsson.com>
|
|
Add support for specifying channel priority when configuring
HSI interface.
ST-Ericsson Linux next: N/A
ST-Ericsson ID: 365662
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I4a1a453edec6122c7d5331db43cb8237c837cc42
Signed-off-by: Derek Morton <derek.morton@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/42228
Reviewed-by: Pawel SZYSZUK <pawel.szyszuk@stericsson.com>
Reviewed-by: QATOOLS
Reviewed-by: QABUILD
Reviewed-by: Christopher BLAIR <chris.blair@stericsson.com>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
|