summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-06-20Viresh has movedViresh Kumar
viresh.kumar@st.com email-id doesn't exist anymore as I have left the company. Replace ST's id with viresh.linux@gmail.com. It also updates .mailmap file to fix address for 'git shortlog' Signed-off-by: Viresh Kumar <viresh.linux@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-20get_maintainer: Fix --help warningJoe Perches
Using --help emits a concatenation error. Fix it. Signed-off-by: Joe Perches <joe@perches.com> Reported-by: Paul Bolle <pebolle@tiscali.nl> Tested-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-20mm/memory.c: fix kernel-doc warningsRandy Dunlap
Fix kernel-doc warnings in mm/memory.c: Warning(mm/memory.c:1377): No description found for parameter 'start' Warning(mm/memory.c:1377): Excess function parameter 'address' description in 'zap_page_range' Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-20mm: fix kernel-doc warningsWanpeng Li
Fix kernel-doc warnings such as Warning(../mm/page_cgroup.c:432): No description found for parameter 'id' Warning(../mm/page_cgroup.c:432): Excess function parameter 'mem' description in 'swap_cgroup_record' Signed-off-by: Wanpeng Li <liwp@linux.vnet.ibm.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-20mm: correctly synchronize rss-counters at exit/execKonstantin Khlebnikov
do_exit() and exec_mmap() call sync_mm_rss() before mm_release() does put_user(clear_child_tid) which can update task->rss_stat and thus make mm->rss_stat inconsistent. This triggers the "BUG:" printk in check_mm(). Let's fix this bug in the safest way, and optimize/cleanup this later. Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de> Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Hugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-20mm, thp: print useful information when mmap_sem is unlocked in zap_pmd_rangeDavid Rientjes
Andrea asked for addr, end, vma->vm_start, and vma->vm_end to be emitted when !rwsem_is_locked(&tlb->mm->mmap_sem). Otherwise, debugging the underlying issue is more difficult. Suggested-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-20h8300: use the declarations provided by <asm/sections.h>Geert Uytterhoeven
Cleanups: - Include <asm/sections.h>, - Remove the (different) extern declarations, - Remove the no longer needed address-of ('&') operators, - Remove the superfluous casts, use proper printk formatting instead. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-20h8300: fix use of extinct _sbss and _ebssGeert Uytterhoeven
Nowadays it should use __bss_start and __bss_stop Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-20xtensa: use the declarations provided by <asm/sections.h>Geert Uytterhoeven
Cleanups: - Include <asm/sections.h>, - Remove the (different) extern declarations, - Remove the no longer needed address-of ('&') operators, - Use %p to format pointer differences. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Chris Zankel <chris@zankel.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-20xtensa: use "test -e" instead of bashism "test -a"Geert Uytterhoeven
On Ubuntu, /bin/sh is a symlink to dash, which does not support "test -a". This causes messages like test: 1: -a: unexpected operator test: 1: -a: unexpected operator and link failures like (.init.text+0x132): undefined reference to `platform_init' due to the appropriate platform code not being compiled. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Chris Zankel <chris@zankel.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-20xtensa: replace xtensa-specific _f{data,text} by _s{data,text}Geert Uytterhoeven
commit a2d063ac216c161 ("extable, core_kernel_data(): Make sure all archs define _sdata") missed xtensa. Xtensa does have a start of data marker, but calls it _fdata, causing kernel/built-in.o:(.text+0x964): undefined reference to `_sdata' _stext was already defined, but it was duplicated by _fdata. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Chris Zankel <chris@zankel.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-20memcg: fix use_hierarchy css_is_ancestor oops regressionHugh Dickins
If use_hierarchy is set, reclaim testing soon oopses in css_is_ancestor() called from __mem_cgroup_same_or_subtree() called from page_referenced(): when processes are exiting, it's easy for mm_match_cgroup() to pass along a NULL memcg coming from a NULL mm->owner. Check for that in __mem_cgroup_same_or_subtree(). Return true or false? False because we cannot know if it was in the hierarchy, but also false because it's better not to count a reference from an exiting process. Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-20mm, oom: fix and cleanup oom score calculationsDavid Rientjes
The divide in p->signal->oom_score_adj * totalpages / 1000 within oom_badness() was causing an overflow of the signed long data type. This adds both the root bias and p->signal->oom_score_adj before doing the normalization which fixes the issue and also cleans up the calculation. Tested-by: Dave Jones <davej@redhat.com> Signed-off-by: David Rientjes <rientjes@google.com> Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-20nilfs2: ensure proper cache clearing for gc-inodesRyusuke Konishi
A gc-inode is a pseudo inode used to buffer the blocks to be moved by garbage collection. Block caches of gc-inodes must be cleared every time a garbage collection function (nilfs_clean_segments) completes. Otherwise, stale blocks buffered in the caches may be wrongly reused in successive calls of the GC function. For user files, this is not a problem because their gc-inodes are distinguished by a checkpoint number as well as an inode number. They never buffer different blocks if either an inode number, a checkpoint number, or a block offset differs. However, gc-inodes of sufile, cpfile and DAT file can store different data for the same block offset. Thus, the nilfs_clean_segments function can move incorrect block for these meta-data files if an old block is cached. I found this is really causing meta-data corruption in nilfs. This fixes the issue by ensuring cache clear of gc-inodes and resolves reported GC problems including checkpoint file corruption, b-tree corruption, and the following warning during GC. nilfs_palloc_freev: entry number 307234 already freed. ... Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Tested-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: <stable@vger.kernel.org> [2.6.37+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-20thp: avoid atomic64_read in pmd_read_atomic for 32bit PAEAndrea Arcangeli
In the x86 32bit PAE CONFIG_TRANSPARENT_HUGEPAGE=y case while holding the mmap_sem for reading, cmpxchg8b cannot be used to read pmd contents under Xen. So instead of dealing only with "consistent" pmdvals in pmd_none_or_trans_huge_or_clear_bad() (which would be conceptually simpler) we let pmd_none_or_trans_huge_or_clear_bad() deal with pmdvals where the low 32bit and high 32bit could be inconsistent (to avoid having to use cmpxchg8b). The only guarantee we get from pmd_read_atomic is that if the low part of the pmd was found null, the high part will be null too (so the pmd will be considered unstable). And if the low part of the pmd is found "stable" later, then it means the whole pmd was read atomically (because after a pmd is stable, neither MADV_DONTNEED nor page faults can alter it anymore, and we read the high part after the low part). In the 32bit PAE x86 case, it is enough to read the low part of the pmdval atomically to declare the pmd as "stable" and that's true for THP and no THP, furthermore in the THP case we also have a barrier() that will prevent any inconsistent pmdvals to be cached by a later re-read of the *pmd. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Jonathan Nieder <jrnieder@gmail.com> Cc: Ulrich Obergfell <uobergfe@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Petr Matousek <pmatouse@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Jan Beulich <jbeulich@suse.com> Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com> Tested-by: Andrew Jones <drjones@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-20mm: fix slab->page _count corruption when using slubPravin B Shelar
On arches that do not support this_cpu_cmpxchg_double() slab_lock is used to do atomic cmpxchg() on double word which contains page->_count. The page count can be changed from get_page() or put_page() without taking slab_lock. That corrupts page counter. Fix it by moving page->_count out of cmpxchg_double data. So that slub does no change it while updating slub meta-data in struct page. [akpm@linux-foundation.org: use standard comment layout, tweak comment text] Reported-by: Amey Bhide <abhide@nicira.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-20xfs: fix debug_object WARN at xfs_alloc_vextent()Jeff Liu
Fengguang reports: [ 780.529603] XFS (vdd): Ending clean mount [ 781.454590] ODEBUG: object is on stack, but not annotated [ 781.455433] ------------[ cut here ]------------ [ 781.455433] WARNING: at /c/kernel-tests/sound/lib/debugobjects.c:301 __debug_object_init+0x173/0x1f1() [ 781.455433] Hardware name: Bochs [ 781.455433] Modules linked in: [ 781.455433] Pid: 26910, comm: kworker/0:2 Not tainted 3.4.0+ #51 [ 781.455433] Call Trace: [ 781.455433] [<ffffffff8106bc84>] warn_slowpath_common+0x83/0x9b [ 781.455433] [<ffffffff8106bcb6>] warn_slowpath_null+0x1a/0x1c [ 781.455433] [<ffffffff814919a5>] __debug_object_init+0x173/0x1f1 [ 781.455433] [<ffffffff81491c65>] debug_object_init+0x14/0x16 [ 781.455433] [<ffffffff8108842a>] __init_work+0x20/0x22 [ 781.455433] [<ffffffff8134ea56>] xfs_alloc_vextent+0x6c/0xd5 Use INIT_WORK_ONSTACK in xfs_alloc_vextent instead of INIT_WORK. Reported-by: Wu Fengguang <wfg@linux.intel.com> Signed-off-by: Jie Liu <jeff.liu@oracle.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-06-20xfs: xfs_vm_writepage clear iomap_valid when !buffer_uptodate (REV2)Alain Renaud
On filesytems with a block size smaller than PAGE_SIZE we currently have a problem with unwritten extents. If a we have multi-block page for which an unwritten extent has been allocated, and only some of the buffers have been written to, and they are not contiguous, we can expose stale data from disk in the blocks between the writes after extent conversion. Example of a page with unwritten and real data. buffer content 0 empty b_state = 0 1 DATA b_state = 0x1023 Uptodate,Dirty,Mapped,Unwritten 2 DATA b_state = 0x1023 Uptodate,Dirty,Mapped,Unwritten 3 empty b_state = 0 4 empty b_state = 0 5 DATA b_state = 0x1023 Uptodate,Dirty,Mapped,Unwritten 6 DATA b_state = 0x1023 Uptodate,Dirty,Mapped,Unwritten 7 empty b_state = 0 Buffers 1, 2, 5, and 6 have been written to, leaving 0, 3, 4, and 7 empty. Currently buffers 1, 2, 5, and 6 are added to a single ioend, and when IO has completed, extent conversion creates a real extent from block 1 through block 6, leaving 0 and 7 unwritten. However buffers 3 and 4 were not written to disk, so stale data is exposed from those blocks on a subsequent read. Fix this by setting iomap_valid = 0 when we find a buffer that is not Uptodate. This ensures that buffers 5 and 6 are not added to the same ioend as buffers 1 and 2. Later these blocks will be converted into two separate real extents, leaving the blocks in between unwritten. Signed-off-by: Alain Renaud <arenaud@sgi.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-06-20drm/radeon: SI tiling fixes for displayAlex Deucher
- Use the correct union for getting the tiling info - Properly init the PIPE_CONFIG field for SI Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-20NFS: Force the legacy idmapper to be single threadedBryan Schumaker
It was initially coded under the assumption that there would only be one request at a time, so use a lock to enforce this requirement.. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> CC: stable@vger.kernel.org [3.4+] Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-06-20Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: "This includes three MMCI changes - one to fix up the wrong version of the DT support patch which was merged, and two to make deferred probing work. It also includes a fix to the OMAP SPI driver which is causing a boot time warning. The remainder are very minor ARM fixes." * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: SPI: fix over-eager devm_xxx() conversion ARM: 7427/1: mmc: mmci: Defer probe() in case of yet uninitialized GPIOs ARM: 7426/1: mmc: mmci: Remove wrong error handling of gpio 0 ARM: 7425/1: extable: ensure fixup entries are 4-byte aligned ARM: 7421/1: bpf_jit: BPF_S_ANC_ALU_XOR_X support ARM: 7423/1: kprobes: run t32_simulate_ldr_literal() without insn slot ARM: 7422/1: mmc: mmci: Allocate platform memory during Device Tree boot
2012-06-20Merge tag 'pinctrl-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull two pinctrl fixes from Linus Walleij: - Fixed a 2-line compile error for MXS - A pure documentation fix for Nomadik * tag 'pinctrl-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl/nomadik: document Alt-C glitch pinctrl: mxs: Use kfree to fix build error
2012-06-20ARM: OMAP: Fix Beagleboard DVI reset gpioRuss Dill
Commit e813a55eb9c9bc6c8039fb16332cf43402125b30 ("OMAP: board-files: remove custom PD GPIO handling for DVI output") moved TFP410 chip's powerdown-gpio handling from the board files to the tfp410 driver. One gpio_request_one(powerdown-gpio, ...) was mistakenly left unremoved in the Beagle board file. This causes the tfp410 driver to fail to request the gpio on Beagle, causing the driver to fail and thus the DVI output doesn't work. This patch removes several boot errors from board-omap3beagle.c: - gpio_request: gpio--22 (DVI reset) status -22 - Unable to get DVI reset GPIO There is a combination of leftover code and revision confusion. Additionally, xM support is currently a hack. For original Beagleboard this removes the double initialization of GPIO 170, properly configures it as an output, and wraps the initialization in an if block so that xM does not attempt to request it. For Beagleboard xM it removes reference to GPIO 129 which was part of rev A1 and A2 designs, but never functioned. It then properly assigns beagle_dvi_device.reset_gpio in beagle_twl_gpio_setup and removes the hack of initializing it high. Additionally, it uses gpio_set_value_cansleep since this GPIO is connected through i2c. Unfortunately, there is no way to tell the difference between xM A2 and A3. However, GPIO 129 does not function on rev A1 and A2, and the TWL GPIO used on A3 and beyond is not used on rev A1 and A2, there are no problems created by this fix. Tested on Beagleboard-xM Rev C1 and Beagleboard Rev B4. Signed-off-by: Russ Dill <Russ.Dill@ti.com> Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-06-20arm/dts: OMAP2: Fix interrupt controller bindingJon Hunter
When booting with device-tree on an OMAP2420H4, the kernel is hanging when initialising the interrupts and following kernel dumps is seen ... [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at arch/arm/mach-omap2/irq.c:271 omap_intc_of_init+0x50/0xb4() [ 0.000000] unable to get intc registers [ 0.000000] Modules linked in: [ 0.000000] [<c001befc>] (unwind_backtrace+0x0/0xf4) from [<c0040c34>] (warn_slowpath_common+0x4c/0x64) [ 0.000000] [<c0040c34>] (warn_slowpath_common+0x4c/0x64) from [<c0040ce0>] (warn_slowpath_fmt+0x30/0x40) [ 0.000000] [<c0040ce0>] (warn_slowpath_fmt+0x30/0x40) from [<c066b8a4>] (omap_intc_of_init+0x50/0xb4) [ 0.000000] [<c066b8a4>] (omap_intc_of_init+0x50/0xb4) from [<c0688b70>] (of_irq_init+0x144/0x288) [ 0.000000] [<c0688b70>] (of_irq_init+0x144/0x288) from [<c0663294>] (init_IRQ+0x14/0x1c) [ 0.000000] [<c0663294>] (init_IRQ+0x14/0x1c) from [<c06607fc>] (start_kernel+0x198/0x304) [ 0.000000] [<c06607fc>] (start_kernel+0x198/0x304) from [<80008044>] (0x80008044) [ 0.000000] ---[ end trace 1b75b31a2719ed1c ]--- [ 0.000000] of_irq_init: children remain, but no parents The OMAP2 interrupt controller binding is missing the number of interrupts and interrupt controller register address. Adding these fixes the problem. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-06-20ARM: OMAP2: Fix tusb6010 GPIO interrupt for n8x0Tony Lindgren
Here's one more gpio_to_irq conversion that we missed earlier. Tested with n800 in gadget mode using USB_ETH. Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-06-20ARM: OMAP2+: Fix MUSB ifdefs for platform init codeTony Lindgren
Commit 62285963 (usb: musb: drop a gigantic amount of ifdeferry) got rid of a bunch of ifdefs in the MUSB code. Looks like the platform init code is still using these dropped defines though, which in many cases results the board defaulting always to host mode. Currently the situation is that USB_MUSB_HDRC is the main Kconfig option with additional USB_GADGET_MUSB_HDRC so only these two should be used to select between host and OTG mode. Fix the situation for omaps. The following users should fix the platform init code in a similar way: Dropped Kconfig option Current users USB_MUSB_OTG blackfin, davinci, not in Kconfigs USB_MUSB_PERIPHERAL davinci, not in Kconfigs USB_MUSB_HOST davinci, not in Kconfigs USB_MUSB_HDRC_HCD blackfin, not in Kconfigs USB_MUSB_OTG blackfin, not in Kconfigs Cc: Mike Frysinger <vapier@gentoo.org> Cc: Sekhar Nori <nsekhar@ti.com> Cc: linux-usb@vger.kernel.org Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-06-20libceph: flush msgr queue during mon_client shutdownSage Weil
We need to flush the msgr workqueue during mon_client shutdown to ensure that any work affecting our embedded ceph_connection is finished so that we can be safely destroyed. Previously, we were flushing the work queue after osd_client shutdown and before mon_client shutdown to ensure that any osd connection refs to authorizers are flushed. Remove the redundant flush, and document in the comment that the mon_client flush is needed to cover that case as well. Signed-off-by: Sage Weil <sage@inktank.com> Reviewed-by: Alex Elder <elder@inktank.com> (cherry picked from commit f3dea7edd3d449fe7a6d402c1ce56a294b985261)
2012-06-20rbd: Clear ceph_msg->bio_iter for retransmitted messageYan, Zheng
The bug can cause NULL pointer dereference in write_partial_msg_pages Signed-off-by: Zheng Yan <zheng.z.yan@intel.com> Reviewed-by: Alex Elder <elder@inktank.com> (cherry picked from commit 43643528cce60ca184fe8197efa8e8da7c89a037)
2012-06-20libceph: use con get/put ops from osd_clientSage Weil
There were a few direct calls to ceph_con_{get,put}() instead of the con ops from osd_client.c. This is a bug since those ops aren't defined to be ceph_con_get/put. This breaks refcounting on the ceph_osd structs that contain the ceph_connections, and could lead to all manner of strangeness. The purpose of the ->get and ->put methods in a ceph connection are to allow the connection to indicate it has a reference to something external to the messaging system, *not* to indicate something external has a reference to the connection. [elder@inktank.com: added that last sentence] Signed-off-by: Sage Weil <sage@newdream.net> Reviewed-by: Alex Elder <elder@inktank.com> (cherry picked from commit 0d47766f14211a73eaf54cab234db134ece79f49)
2012-06-20libceph: osd_client: don't drop reply reference too earlyAlex Elder
In ceph_osdc_release_request(), a reference to the r_reply message is dropped. But just after that, that same message is revoked if it was in use to receive an incoming reply. Reorder these so we are sure we hold a reference until we're actually done with the message. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com> (cherry picked from commit ab8cb34a4b2f60281a4b18b1f1ad23bc2313d91b)
2012-06-20ceph: check PG_Private flag before accessing page->privateYan, Zheng
I got lots of NULL pointer dereference Oops when compiling kernel on ceph. The bug is because the kernel page migration routine replaces some pages in the page cache with new pages, these new pages' private can be non-zero. Signed-off-by: Zheng Yan <zheng.z.yan@intel.com> Signed-off-by: Sage Weil <sage@inktank.com> (cherry picked from commit 28c0254ede13ab575d2df5c6585ed3d4817c3e6b)
2012-06-20Merge branch 'tip/perf/urgent-2' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace into perf/urgent
2012-06-19Merge tag 'sound-3.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Most of changes are fairly small and driver-specific. A remaining regression fix for USB-audio sync pipe check, a fix for HD-audio power-up sequence, fixes for ASoC pxa-ssp compile issues, and bunch of ASoC codec and trivial fix patches." * tag 'sound-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: 6fire: use NULL instead of 0 for pointer assignment ALSA: hda - Handle open while transitioning to D3. ALSA: snd-usb: make snd_usb_substream_capture_trigger static ALSA: snd-usb: fix sync pipe check ASoC: tegra+wm8903: turn of mic detect when card is removed ASoC: wm8996: Mark the CODEC as cache only when powering off on boot ASoC: wm8996: Move reset before the initial regulator disable ASoC: wm8996: Remove spurious regulator_bulk_free() ASoC: wm8904: Fix cache only management ASoC: wm8904: Fix GPIO and MICBIAS initialisation for regmap conversion ASoC: fix pxa-ssp compiling issue under mach-mmp ARM: MMP: add pxa910-ssp into ssp_id_table
2012-06-19RDMA/cma: QP type check on received REQs should be AND not ORSean Hefty
Change || check to the intended && when checking the QP type in a received connection request against the listening endpoint. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-06-19NFS: Initialise commit_info.rpc_out when !defined(CONFIG_NFS_V4)Trond Myklebust
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Fred Isaman <iisaman@netapp.com>
2012-06-19NFS: Fix a refcounting issue in O_DIRECTTrond Myklebust
In nfs_direct_write_reschedule(), the requests from nfs_scan_commit_list have a refcount of 2, whereas the operations in nfs_direct_write_completion_ops expect them to have a refcount of 1. This patch adds a call to release the extra references. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Fred Isaman <iisaman@netapp.com>
2012-06-19Merge tag 'regulator-3.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "One small bug fix, plus a rename of all the ST Ericsson regulators in the device tree since all the device trees had been written with different names and some infelicities in the test proceedures meant that the device tree code had apparently never actually been run against the upstream device tree." * tag 'regulator-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: Change db8500-prcmu match names to reflect Device Tree regulator: Change ab8500 match names to reflect Device Tree regulator: Fix the s5m8767a problem of the division by null
2012-06-19NFSv4.1: Fix a race in set_pnfs_layoutdriverTrond Myklebust
The call to try_module_get() dereferences ld_type outside the spin locks, which means that it may be pointing to garbage if a module unload was in progress. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-06-19KVM: PPC: Book3S HV: Drop locks around call to kvmppc_pin_guest_pagePaul Mackerras
At the moment we call kvmppc_pin_guest_page() in kvmppc_update_vpa() with two spinlocks held: the vcore lock and the vcpu->vpa_update_lock. This is not good, since kvmppc_pin_guest_page() calls down_read() and get_user_pages_fast(), both of which can sleep. This bug was introduced in 2e25aa5f ("KVM: PPC: Book3S HV: Make virtual processor area registration more robust"). This arranges to drop those spinlocks before calling kvmppc_pin_guest_page() and re-take them afterwards. Dropping the vcore lock in kvmppc_run_core() means we have to set the vcore_state field to VCORE_RUNNING before we drop the lock, so that other vcpus won't try to run this vcore. Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-06-18ARM: tegra: make tegra_cpu_reset_handler_enable() __initStephen Warren
This solves a section mismatch warning. I hadn't noticed this before, because my compiler was inlining tegra_cpu_reset_handler_enable() inside tegra_cpu_reset_handler_init(), which is already __init, but I switched compilers and it stopped doing that. Cc: <stable@kernel.org> # v3.4 Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-06-18extcon: max8997: Add missing kfree for info->edev in max8997_muic_remove()Axel Lin
extcon_dev_unregister(info->edev) doest not free info->edev, we need to call kfree(info->edev) here. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-18extcon: Set platform drvdata in gpio_extcon_probe() and fix irq leakAxel Lin
Add missing platform_set_drvdata() in gpio_extcon_probe(), otherwise calling platform_get_drvdata in gpio_extcon_remove() returns NULL. Also add missing free_irq call in gpio_extcon_remove(). Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-18extcon: Fix wrong index in max8997_extcon_cable[]Axel Lin
Currently, the index of "Dock-desk" and "Dock-card" are the same. Thus the latter one overrides the first one. Then we have problem when calling extcon_find_cable_index() because edev->supported_cable[7] only matches "Dock-card". Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-18kmsg - kmsg_dump() fix CONFIG_PRINTK=n compilationKay Sievers
Signed-off-by: Kay Sievers <kay@vrfy.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Reported-by: Randy Dunlap <rdunlap@xenotime.net> Reported-by: Fengguang Wu <wfg@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-18cgroups: Account for CSS_DEACT_BIAS in __css_putSalman Qazi
When we fixed the race between atomic_dec and css_refcnt, we missed the fact that css_refcnt internally subtracts CSS_DEACT_BIAS to get the actual reference count. This can potentially cause a refcount leak if __css_put races with cgroup_clear_css_refs. Signed-off-by: Salman Qazi <sqazi@google.com> Acked-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2012-06-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edacLinus Torvalds
Pull EDAC fixes from Mauro Carvalho Chehab. * git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac: edac: Do alignment logic properly in edac_align_ptr() mpc85xx_edac: fix error: too few arguments to function 'edac_mc_alloc' edac: fix the error about memory type detection on SandyBridge edac: avoid mce decoding crash after edac driver unloaded
2012-06-18Merge branch 'v9fs-devel' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs Pull a 9p bugfix from Eric Van Hensbergen. * 'v9fs-devel' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs: 9p: BUG before corrupting memory
2012-06-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds
Pull a crypto fix from Herbert Xu: "This push fixes another bug in the atmel-rng that made it produce completely useless output." * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: hwrng: atmel-rng - fix data valid check
2012-06-18Merge tag 'mmc-fixes-for-3.5-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc Pull MMC fixes from Chris Ball: - atmel-mci: Fixes for NULL timer and DMA burst/chunk size - dw_mmc: Fix DMA ordering, clkdiv calculation, NULL host->data - mxs_mmc: Compile fix for CONFIG_OF=y && CONFIG_PM=n - omap: Fix NULL deref in mmc_omap_remove_slot(), reg_shift initialization - sdhci-s3c: Fix boot regression by adding IRQF_ONESHOT flag - Small fixes to core/sd, core/sdio, sdhci * tag 'mmc-fixes-for-3.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: mmc: mxs-mmc: Move of_match_table out of CONFIG_PM mmc: sdhci-s3c: pass IRQF ONESHOT to request threaded irq mmc: core: return an error on suspend if mmc_deselect_cards fails mmc: omap: Fix broken reg_shift initialization mmc: omap: Fix NULL pointer dereference if mmc_omap_new_slot() fails mmc: omap: Fix a section warning regression mmc: dw_mmc: correct the calculation for CLKDIV mmc: dw_mmc: fix incorrect setting of host->data of NULL mmc: dw_mmc: fix the IDMAC sw reset mmc: dw_mmc: fix the transmission handling in IDMAC mmc: sdio: fix setting card data bus width as 4-bit mmc: atmel-mci: fix burst/chunk size modification mmc: atmel-mci: fix data timeout issue mmc: sdhci: Use DBG() instead of pr_warning() on large timeout
2012-06-18Merge tag 'rproc-fixes-for-3.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteproc Pull remoteproc fixes from Ohad Ben-Cohen: "A few relatively-small remoteproc fixes for 3.5: two error path fixes, and one -Wformat warning fix." * tag 'rproc-fixes-for-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteproc: remoteproc/omap: fix dev_err typo remoteproc: fix missing fault indication in error-path remoteproc: fix print format warnings
generated by cgit v1.2.3 (git 2.39.1) at 2024-06-08 17:42:35 +0000