Age | Commit message (Collapse) | Author |
|
Signed-off-by: ramesh.chandrasekaran <ramesh.chandrasekaran@stericsson.com>
|
|
integration-linux-ux500-3.3
Conflicts:
arch/arm/mach-ux500/Makefile
drivers/mfd/db8500-prcmu.c
include/linux/mfd/db8500-prcmu.h
include/linux/mfd/dbx500-prcmu.h
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Simple timed output vibrator driver for AB5500 MFD chips.
This chip supports Rotary and Linear vibrator hardware types.
Resonance frequency of 100-198 Hz is supported.
ST-Ericsson ID: WP 256408
Signed-off-by: Avinash A <Avinash.a@stericsson.com>
Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
u5500: enable vibrator when new timeout is requested
with this patch new timeout value will be
accepted/updated even if vibrator is already
executing.
ST-Ericsson ID: 360178
Signed-off-by: Avinash A <Avinash.a@stericsson.com>
vibra:Remove unnecessary assignment of dev->parent
Remove unnecessary assignment of dev->parent,
because of this during timed out class unregister
it is trying to free resources of parent which
does not exist
ST-Ericsson ID: 410065
Signed-off-by: Naga Radhesh <naga.radheshy@stericsson.com>
u5500: Add vibra end of life support
Detect and disable vibra when vibra end of life(eol)
condition is detected at boot sequence.
ST-Ericsson ID: 265890
Signed-off-by: Rajagopala V <rajagopala.v@stericsson.com>
|
|
ST-Ericsson vibrator driver which registers in Android specific
timed output device class.
Signed-off-by: Marcin Mielczarczyk <marcin.mielczarczyk@tieto.com>
Signed-off-by: Jerzy Kasenberg <jerzy.kasenberg@tieto.com>
Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
Timed output vibrator: New functionality.
This patch allows to form the vibration characteristic
using few parameters defined in the platform data:
- boost level and period for start condition
- on level as moderate speed
- off level and period for brake condition
Detailed information can be found here:
Documentation\DocBook\ste_timed_vibra.html
Signed-off-by: Grzegorz Sygieda <grzegorz.sygieda@tieto.com>
Signed-off-by: Krzysztof Antonowicz <krzysztof.antonowicz@tieto.com>
Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com>
vibrator: remove board specific control of vibrator
Platform specific control of vibrator should be
present in board file (here board-mop500.c).
So, for example if GPIO pins are used to control
the vibrator, its control function implemenation
should be in board file.
This patch provides the callback function support
in the driver for the same.
Signed-off-by: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com>
android: vibrator: dont directly access ktime_t members
Use ktime helper functions for converting ktime values
Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
u8500: vibra: linear vibrators using vibra-pwm
Linear vibrators operate on thier required resonance
frequency (for COPAL and AAC its ~150Hz). This can be
provided using AUDIO DA5 path. This software *workaround*
enables linear vibrators using AB8500 vibra-pwm by
generating required resonace frequency using software.
In addition this patch provides support for separate
platform data for Linear and Rotarty vibrators.
Signed-off-by: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com>
u8500: vibra: disable vibrator after vibration
This patch disables vibrator i.e. configures
the PWM duty cycle to zero after vibration
duration is over.
Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org>
u8500: optimize: linear vibra drv using vibra-pwm
This patch optimizes the current implementation
of "linear vibrator driver using vibra-pwm".
Current implementation is CPU intensive and uses
100% of a CPU for the time period vibrator is used.
ST-Ericsson ID: ER 349958
Signed-off-by: Avinash A <Avinash.a@stericsson.com>
u8500: vibra: fix sleeping fn. in atomic context
sleepable call - flush_workqueue called from atomic
context of vibra_enable.
ST-Ericsson ID: ER 351276
Signed-off-by: Avinash A <Avinash.a@stericsson.com>
u8500: vibra: remove race condition in timer operation
In situation described below, vibra driver can hang.
In a scenario where vibra_enable is called and vibrator
is running i.e. vibra_work is scheduled and vibra_timer.
Suppose vibra_timer is started and has not expired yet.
At this moment if vibra_work starts executing and acquires
the vibra_lock and just before hrtimer_cancel is called,
if old timer expires and timer callback starts executing
then it will try to acquire vibra_lock and hence it will
wait for vibra_lock, as it is already acquired by vibra_work.
Now vibra_work->hrtimer_cancel will wait for timer callback
to complete and timer callback will wait for vibra_lock to
be free so that it can complete. This result in recursive
waiting for vibra_lock and hence deadlock.
As timer callback is running in interrupt context so above
deadlock may trigger watchdog.
ST-Ericsson ID: 405366
Signed-off-by: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com>
u8500: vibra: remove race condition in open
In situation described below, vibra driver can hang.
vibra_enable takes the vibra_lock and timer expires then
timer callback will spin for vibra_lock. If vibra_enable
tries to do hrtimer_cancel then it will wait for timer
callback to complete.
In above situation hrtimer_cancel will wait for timer callback
to complete and timer callback will wait for vibra_lock to
be free so that it can complete. This result in recursive
waiting for vibra_lock and hence deadlock.
As timer callback is running in interrupt context so above
deadlock may trigger watchdog.
ST-Ericsson ID: 407253
Signed-off-by: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com>
vibra:Remove unnecessary assignment of dev->parent
Remove unnecessary assignment of dev->parent,
because of this during timed out class unregister
it is trying to free resources of parent which
does not exist
Signed-off-by: Naga Radhesh <naga.radheshy@stericsson.com>
|
|
This patch updates the AB8500 driver to make use of the I2C
read-modify-write service in the PRCMU firmware.
ST Ericsson ID: 354143
ST Ericsson FOSS-OUT ID: trivial
Change-Id: Ic204b63b3a7546bbb7cf4966c973f9ec3662c328
Signed-off-by: Mattias Nilsson <mattias.i.nilsson@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/47195
Reviewed-by: QABUILD
Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
|
|
* db5500_prcmu_set_power_state
* db5500_prcmu_enable_wakeups
are called from prcmu_set_power_state and prcmu_enable_wakeups but
they are not defined.
When applying the cpuidle patch, the code invokes both functions
and that leads to an undefined functions compilation error.
So let's do like the other functions and return EINVAL.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
The mfd-2.6 kernel tree use the cpu_is_u5500 function
while this version use machine_is_u5500.
An error was introduced by backporting prcmu_is_cpu_in_wfi function
from the mfd-2.6 kernel tree.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
This patch allows to check if the other core is in WFI
mode. It is the last check the idle routine has to do before
entering into the retention state.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
This patch allows to decouple and recouple the gic from the PRCMU.
This is needed to put the A9 core in retention mode with the cpuidle
driver.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Make necessary changes to implement time keeping and irq enabling
in the core cpuidle code. This will allow the removal of these
functionalities from various platform cpuidle implementations whose
timekeeping and irq enabling follows the form in this common code.
Signed-off-by: Robert Lee <rob.lee@linaro.org>
Tested-by: Jean Pihet<j-pihet@ti.com>
Tested-by: Amit Daniel<amit.kachhap@linaro.org>
Tested-by: Robert Lee<rob.lee@linaro.org>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Deepthi Dharwar<deepthi@linux.vnet.ibm.com>
Acked-by: Jean Pihet<j-pihet@ti.com>
|
|
With this patch it is possible to retrieve sec_level from the kernel by
user space. This is needed for SAP working on hciops.
This patch missed to be added when moving to kernel 3.0
ST-Ericsson ID: 256270
ST-Ericsson FOSS-OUT ID: FOSS-OUT-10060
Change-Id: Ic569db392e6f6ee2e546003dec86cc2d62a1fcd7
Signed-off-by: Lukasz Rymanowski <lukasz.rymanowski@tieto.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/42169
Reviewed-by: Lukasz RYMANOWSKI <lukasz.rymanowski@stericsson.com>
Tested-by: Lukasz RYMANOWSKI <lukasz.rymanowski@stericsson.com>
Reviewed-by: Hakan GARDRUP <hakan.gardrup@stericsson.com>
Reviewed-by: Henrik POSSUNG <henrik.possung@stericsson.com>
Reviewed-by: Kanak GUPTA <kanak.gupta@stericsson.com>
|
|
Adds ability to setup SCO connection parameters through socket option.
ST-Ericsson Linux next: Not tested, ER 256277
ST-Ericsson ID: 256277
ST-Ericsson FOSS-OUT ID: STETL-FOSS-OUT-10137
Change-Id: If859341019fd9f7cc7c0efe95750779e84fac801
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@tieto.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/30136
Reviewed-by: Par-Gunnar HJALMDAHL <par-gunnar.p.hjalmdahl@stericsson.com>
Tested-by: Par-Gunnar HJALMDAHL <par-gunnar.p.hjalmdahl@stericsson.com>
Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
|
|
Add support for specifying channel priority when configuring
HSI interface.
ST-Ericsson Linux next: N/A
ST-Ericsson ID: 365662
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I4a1a453edec6122c7d5331db43cb8237c837cc42
Signed-off-by: Derek Morton <derek.morton@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/42228
Reviewed-by: Pawel SZYSZUK <pawel.szyszuk@stericsson.com>
Reviewed-by: QATOOLS
Reviewed-by: QABUILD
Reviewed-by: Christopher BLAIR <chris.blair@stericsson.com>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
|
|
Add HSI character device kernel configuration
Change-Id: Ic66236e6745634850ef887b96313bbdc6e624972
Signed-off-by: Andras Domokos <andras.domokos@nokia.com>
Signed-off-by: Carlos Chinea <carlos.chinea@nokia.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/20579
Reviewed-by: Pawel SZYSZUK <pawel.szyszuk@stericsson.com>
Tested-by: Pawel SZYSZUK <pawel.szyszuk@stericsson.com>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
|
|
Add HSI char device driver to the kernel.
Change-Id: I58a6e1526271781c4532202b4688ee239e6fbc58
Signed-off-by: Andras Domokos <andras.domokos@nokia.com>
Signed-off-by: Carlos Chinea <carlos.chinea@nokia.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/20578
Reviewed-by: Pawel SZYSZUK <pawel.szyszuk@stericsson.com>
Tested-by: Pawel SZYSZUK <pawel.szyszuk@stericsson.com>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
|
|
Adds HSI framework in to the linux kernel.
High Speed Synchronous Serial Interface (HSI) is a
serial interface mainly used for connecting application
engines (APE) with cellular modem engines (CMT) in cellular
handsets.
HSI provides multiplexing for up to 16 logical channels,
low-latency and full duplex communication.
Change-Id: I7f20219c15151e5c36c22a581b581b832abec04d
Signed-off-by: Carlos Chinea <carlos.chinea@nokia.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/20575
Reviewed-by: Pawel SZYSZUK <pawel.szyszuk@stericsson.com>
Tested-by: Pawel SZYSZUK <pawel.szyszuk@stericsson.com>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
|
|
ST-Ericsson Linux next: -
ST-Ericsson ID: 402239
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: Ia08165f58c0d55db7ed97a0c74cd4b493cf14495
Signed-off-by: Arun Murthy <arun.murthy@stericsson.com>
Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/47128
Reviewed-by: QABUILD
Reviewed-by: QATEST
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
|
|
/local/scratch/hudson_prod/sandbox/build-roots/u8500-lbp-dev/kernel/
Documentation/DocBook/shrm.xml:2153: parser error : EntityRef: expecting ';'
<title>&shm_mod_stuck_kw_task</title>
^
unable to parse /local/scratch/hudson_prod/sandbox/build-roots/u8500-lbp-dev/
kernel/Documentation/DocBook/shrm.xml
/bin/cp: cannot stat `*.*htm*': No such file or directory
make[4]: *** [Documentation/DocBook/shrm.html] Error 1
make[4]: *** Waiting for unfinished jobs....
ST-Ericsson Linux next: NA
ST-Ericsson ID: 407459
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I916a0aace48eb04b9707c3d2f3f6b4c47ce08b30
Signed-off-by: Arun Murthy <arun.murthy@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/46539
Reviewed-by: Maria STURESSON <maria.sturesson@stericsson.com>
Reviewed-by: QATEST
Reviewed-by: Henrik CARLING <henrik.carling@stericsson.com>
|
|
On APE sending msg_pend notification, the only way when APE gets to know that
modem is not responsive, is when it ends up with a FIFO full. In order to get
this FIFO full on common channel it might take 30min. Hence add a timer and
start the timer on msg_pend_notification and cancel the timer at read_noti.
If timer expires within this time then its for sure that modem is not
responsive. Initiate MSR in that case.
The current timer value is 6sec.
Since there are two timers and on expiry of either of the timer, modem_reset
is called, have added flag so as to ensure that modem_rest is not called
simultaneously on exit of both the timer in short span of time.
ST-Ericsson Linux next: NA
ST-Ericsson ID: 407459
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: If3e7b61ee57ea4b1d386a50c8c4b99c2cd701e13
Signed-off-by: Arun Murthy <arun.murthy@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/46337
Reviewed-by: Ashok G X <ashok.g@stericsson.com>
Tested-by: Ashok G X <ashok.g@stericsson.com>
Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
|
|
Adds additional dump area information which contains
information of fuses in db8500.
ST-Ericsson Linux next: -
ST-Ericsson ID: 404278
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: If2aea9493c0942700acc676c40dc9b6e344ef891
Signed-off-by: Rikard Olsson <rikard.p.olsson@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/45155
Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
|
|
Adds the net device interface from the modem to userspace.
ST-Ericsson ID: 369397
ST-Ericsson FOSS-OUT ID: STETL-FOSS-OUT-12224
ST-Ericsson Linux next: NA
Change-Id: Ib1cafdc1558305d808870b0fdafa8e7029ec5a6b
Signed-off-by: Chris Blair <chris.blair@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/36494
Reviewed-by: QATOOLS
Reviewed-by: QABUILD
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
|
|
A new shared-mem IPC logical channel (mapID=200) allows APE
to send and receive messages to the modem in support of the
calibration of the RealTimeClock.
The modem can measure the 32KHz clock drift (against network clock)
and report the drift to the APE. This new logical channel supports
this reporting and can be accessed via a new /dev/rtc_calibration
device.
ST-Ericsson ID: 362204
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: Ic0ed097c1bbd8b3a6816642840c258e598b79715
Signed-off-by: Mark Godfrey <mark.godfrey@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/36440
Reviewed-by: QATOOLS
Reviewed-by: QABUILD
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
|
|
ST-Ericsson Linux next: NA
ST-Ericsson ID: 354484
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I9b086aae5dc697c1b0fccc0913b170c3ef32ea97
Signed-off-by: Arun Murthy <arun.murthy@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/41014
Reviewed-by: QABUILD
Reviewed-by: Bibek BASU <bibek.basu@stericsson.com>
Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
|
|
Adds the char device interface from the modem to userspace.
ST-Ericsson ID: 369397
ST-Ericsson FOSS-OUT ID: STETL-FOSS-OUT-12224
ST-Ericsson Linux next: NA
Change-Id: Ia0a5e8a8e95f28ee4a812795db91dc872b39f560
Signed-off-by: Chris Blair <chris.blair@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/36491
Reviewed-by: QATOOLS
Reviewed-by: QABUILD
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
|
|
Adds the M6718 modem IPC SPI driver procotol framework and types.
Placeholders remain where future parts of the protocol will be
called.
ST-Ericsson ID: 369397
ST-Ericsson FOSS-OUT ID: STETL-FOSS-OUT-12224
ST-Ericsson Linux next: NA
Change-Id: Id4cd5a7fa730c06838c9dd5b1a1cc0045135fdd4
Signed-off-by: Chris Blair <chris.blair@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/36466
Reviewed-by: QATOOLS
Reviewed-by: QABUILD
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
|
|
Adds the modem state driver to the M6718 modem IPC interface.
ST-Ericsson ID: 369397
ST-Ericsson FOSS-OUT ID: STETL-FOSS-OUT-12224
ST-Ericsson Linux next: NA
Change-Id: I5566277b950aa0be954f4350bdc1ed38c7afd7d8
Signed-off-by: Chris Blair <chris.blair@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/36434
Reviewed-by: Derek MORTON <derek.morton@stericsson.com>
Reviewed-by: QATOOLS
Reviewed-by: Andrew LYNN <andrew.lynn@stericsson.com>
Reviewed-by: QABUILD
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
|
|
Adds support for the M6718 modem IPC SPI driver. This patch adds the
spi driver under which the protocol will be added.
ST-Ericsson ID: 369397
ST-Ericsson FOSS-OUT ID: STETL-FOSS-OUT-12224
ST-Ericsson Linux next: NA
Change-Id: Ifa60efa9cb6a9d30b02b88b563624a293bc0930c
Signed-off-by: Chris Blair <chris.blair@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/36433
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
|
|
Workqueue updates no longer guarantee fixed workqueue to worker
kthread association, so giving RT priority to the irq worker won't
work. Use kthread_worker which guarantees specific kthread association
instead. This also makes setting the priority cleaner.
ST-Ericsson ID: 361756
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: Id54eafae1391ef8b09e93a4815efa1b674d3d90d
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/36062
Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
Reviewed-by: QABUILD
Tested-by: Christoffer LONNERFORS <christoffer.lonnerfors@stericsson.com>
Reviewed-by: Arun MURTHY <arun.murthy@stericsson.com>
|
|
During APE-Modem communication, for some reasson if software or hardware
fails, instead of calling kernel function BUG() and halting the system
making it no more useful until reboot, initiate a MSR.
ST-Ericsson Linux next: NA
ST-Ericsson ID: 366150
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I59e93b338c3242b506be7775487be065421022b8
Signed-off-by: Arun Murthy <arun.murthy@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33416
Reviewed-by: Bibek BASU <bibek.basu@stericsson.com>
Reviewed-by: QABUILD
Reviewed-by: Magnus TEMPLING <magnus.templing@stericsson.com>
Reviewed-by: Rickard EVERTSSON <rickard.evertsson@stericsson.com>
Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
|
|
Adds support for the CIQ L2Mux channel
ST-Ericsson ID: CR334399
Change-Id: Ib189a1090c11b3537fafd6f3b9bc8becf1c63c2f
Signed-off-by: Kumar Sanghvi <kumar.sanghvi@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/23373
Reviewed-by: QATEST
Tested-by: Sean SANDOVAL <sean.xx.sandoval@stericsson.com>
Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
|
|
Moves shrm specific files from arch/arm/mach-ux500/mach/include
and drivers/misc to include/linux/modem/shrm and drivers/modem/shrm
respectively
ST-Ericsson ID: CR329459
Change-Id: I3a08f83e5302429d51eb865ee1c5e4e0ec73e31b
Signed-off-by: Kumar Sanghvi <kumar.sanghvi@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/23980
Reviewed-by: QATEST
Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
|
|
Adds Modem Access Framework, which allows for registering
platform specific modem access mechanisms. The framework also
exposes APIs for client drivers for getting and releasing access
to modem, regardless of the underlying platform specific access
mechanism.
ST-Ericsson ID: CR329459
Change-Id: I643c56892e4423ec27467cbcfe8a22586c1e3f6a
Signed-off-by: Kumar Sanghvi <kumar.sanghvi@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/23553
Reviewed-by: QATEST
Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
|