summaryrefslogtreecommitdiff
path: root/sound
AgeCommit message (Collapse)Author
2012-06-18ALSA: 6fire: use NULL instead of 0 for pointer assignmentDaniel Mack
Signed-off-by: Daniel Mack <zonque@gmail.com> Cc: Torsten Schenk <torsten.schenk@zoho.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-18ALSA: hda - Handle open while transitioning to D3.Dylan Reid
This addresses an issue encountered when a pcm is opened while transitioning to low power state (codec->power_on == 1 && codec->power_transition == -1). Add snd_pcm_power_up_d3wait to hda_codec. This function is used to power up from azx_open as opposed to snd_hda_power_up used from codec_exec_verb. When powering up from azx_open, wait for pending power downs to complete, avoiding the power up continuing in parallel with the power down on the work queue. The specific issue seen was with the CS4210 codec, it powers off the ADC and DAC nid in its suspend handler. If it is re-opened before the ~100ms power down process completes, the ADC and DAC nid are initialized while powered down and audio is lost until another suspend/resume cycle. Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-18ALSA: snd-usb: make snd_usb_substream_capture_trigger staticDaniel Mack
Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-18ALSA: snd-usb: fix sync pipe checkDaniel Mack
Fix a bogus sanity check for sync pipe in pcm.c. This flaw was introduced during the streaming logic refactorization. While at it, improve the error messages that are generated in such cases. Signed-off-by: Daniel Mack <zonque@gmail.com> Reported-and-tested-by: <ben@b1c1l1.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-18Merge tag 'asoc-3.5' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for 3.5 All driver specific and fairly small. The pxa-ssp changes are larger than I'd like but they're build failures and are pretty clear to inspection.
2012-06-13ALSA: hda - Don't forget to call init verbs added by fixup listTakashi Iwai
During the split to the auto-parser helper functions, the actual call of init verbs was lost. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=43366 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-12ALSA: HDA: Pin fixup for Zotac Z68 motherboardDavid Henningsson
Pin 0x1b was connected to the front panel connector, which according to the HDA standard should contain a mic and a headphone. In this case, the headphone was listed as "line out" by BIOS. Cc: stable@kernel.org BugLink: https://bugs.launchpad.net/bugs/993162 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-12ALSA: compress_core: cleanup pointers on stopVinod Koul
as the start can be called after stop again, we need to reset state Signed-off-by: Namarta Kohli <namartax.kohli@intel.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-12ALSA: compress_core: don't wake up on pauseVinod Koul
during pause the core should maintain the status-quo on the device and pointers and not wake up. If app needs it should call DROP explcitly. Signed-off-by: Namarta Kohli <namartax.kohli@intel.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-12ASoC: tegra+wm8903: turn of mic detect when card is removedStephen Warren
If mic detect is left enabled and the WM8903 detects a status change, the WM8903 driver will make a callback against the free()d jack, which will cause a crash. This problem can be triggered by fully initializing an audio card, then removing and re-inserting the machine driver module. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-11ALSA: hda - Fix detection of Creative SoundCore3D controllersTakashi Iwai
The PCI ID entries of Creative SoundCore3D HD-audio controllers should be before the wildcard for vendor = Creative. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-11ASoC: wm8996: Mark the CODEC as cache only when powering off on bootMark Brown
Otherwise we might try to write to a powered off device. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-11ASoC: wm8996: Move reset before the initial regulator disableMark Brown
If we don't have control over the LDO but do have control over the other regulators then we may end up trying to write to a powered off device. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-11ASoC: wm8996: Remove spurious regulator_bulk_free()Mark Brown
We're using demv_regulator_bulk_get() so don't need to manually free and this is in the CODEC driver not the I2C driver anyway. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-11ASoC: wm8904: Fix cache only managementMark Brown
We should be using the regmap API consistently for all the cache only configuration and we should be going cache only before we power down the supplies. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-11ASoC: wm8904: Fix GPIO and MICBIAS initialisation for regmap conversionMark Brown
We no longer have a flat ASoC cache so can't peer directly into the array any more but should instead use the register I/O functions to update the cache. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org (v3.4)
2012-06-11ASoC: fix pxa-ssp compiling issue under mach-mmpQiao Zhou
pxa-ssp.c uses API like cpu_is_pxa3xx(), cpu_is_pxa2xx(), which is defined under arch-pxa architecture, and drivers under mach-mmp can't find it. so just use ssp->type to replace that API. Signed-off-by: Qiao Zhou <zhouqiao@marvell.com> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-08ALSA: hda - HDMI Audio init all connectors when VGA-switcheroo is offSteven Newbury
When VGA_SWITCHEROO support is enabled hda_intel initialises the HDMI audio device on the current VGA device. When it's not enabled it only initialises the HDMI device on the default VGA adaptor, this means secondary cards get no audio support which is very unhelpful for multi-seat! With this patch, when SUPPORT_VGA_SWITCHEROO is disabled hda_intel initialises all HDMI audio devices, not just the default VGA. [minor optimizations by tiwai] Signed-off-by: Steven Newbury <steve@snewbury.org.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-08ALSA: hda - Fix uninitialized HDMI controllers with VGA-switcherooTakashi Iwai
When VGA-switcheroo is built in but unused on systems with multiple graphics cards, the initializations of non-default graphics cards are skipped and never enabled (because the switcheroo is activated only when the controller supports). The current behavior is for avoiding the system lockup by accessing the disabled GPU, but due to the recent change in VGA-switcheroo, it determines the state simply by checking with the default VGA device. This is the culprit. Now with the new vga_switcheroo_get_client_state(), we can know the initial state of the bound GPU, thus can determine the initial audio client state more correctly. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-08ALSA: usb-audio: Fix substream assignmentsTakashi Iwai
In 3.5 kernel, the endpoint is assigned dynamically for the substreams, but the PCM assignment still checks the presence of the endpoint pointer. This ended up in duplicated PCM substream creations at probing time, resulting in kernel warnings like: WARNING: at fs/proc/generic.c:586 proc_register+0x169/0x1a6() Pid: 1152, comm: modprobe Not tainted 3.5.0-rc1-00110-g71fae7e #2 Call Trace: [<ffffffff8102a400>] warn_slowpath_common+0x83/0x9c [<ffffffff8102a4bc>] warn_slowpath_fmt+0x46/0x48 [<ffffffff813829ad>] ? add_preempt_count+0x39/0x3b [<ffffffff811292f0>] proc_register+0x169/0x1a6 [<ffffffff8112962e>] create_proc_entry+0x74/0x8c [<ffffffffa018eb63>] snd_info_register+0x3e/0xc3 [snd] [<ffffffffa01fde2e>] snd_pcm_new_stream+0xb1/0x404 [snd_pcm] [<ffffffffa024861f>] snd_usb_add_audio_stream+0xd2/0x230 [snd_usb_audio] [<ffffffffa0241d33>] ? snd_usb_parse_audio_format+0x252/0x34f [snd_usb_audio] [<ffffffff810d6b17>] ? kmem_cache_alloc_trace+0xab/0xbb [<ffffffffa0248c29>] snd_usb_parse_audio_interface+0x4ac/0x567 [snd_usb_audio] [<ffffffffa023f0ff>] snd_usb_create_stream+0xe9/0x125 [snd_usb_audio] [<ffffffffa023f9b1>] usb_audio_probe+0x62a/0x72c [snd_usb_audio] ..... This patch fixes the regression by checking the fixed endpoint number for each substream instead of the endpoint pointer. Reported-and-tested-by: Jamie Heilman <jamie@audible.transient.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-08ASoC: tegra: add MODULE_DEVICE_TABLE to tegra30_ahubStephen Warren
This allows the module to automatically load when instantiated from device tree. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-08ASoC: wm2000: Always use a 4s timeout for the firmwareMark Brown
Rather than having varying timeouts depending on the transition always use a 4s timeout. This provides better diagnostics for clocking errors and ensures compatibility with current calibration firmwares. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-08ASoC: dapm: Fix input list to use source widgetsLiam Girdwood
We should only add source widgets to the input list. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-08ASoC: dpcm: Fix dpcm_get_be() to check that DAI is BELiam Girdwood
Make sure that the dpcm_get_be() only returns BE DAI links. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-05ASoC: wm8994: Apply volume updates with clocks enabledMark Brown
Volume updates may not be acted upon if there is no clock applied when the volume update is written. Ensure this doesn't happen by writing out registers with volume updates after we enable each of the clocks. There are more registers updated than before as previously we were relying on wm_hubs to set those for controls it manages. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2012-06-05ASoC: wm8994: Ensure all AIFnCLK events are run from the _late variantsMark Brown
Ensure that all the actions get taken at appropriate times by calling the _PRE and _POST events for the aifNclk_ev functions explicitly. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2012-06-04ASoC: imx-audmux: add pinctrl supportRichard Zhao
Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-04ASoC: dapm: Fix connected widget capture path query.Liam Girdwood
Make sure we check the correct path for capture. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-01Merge tag 'sound-3.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Just a few trivial driver-specific fixes." * tag 'sound-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hdspm - Work around broken DDS value on PCI RME MADI ALSA: usb-audio: fix rate_list memory leak ASoC: fsi: bugfix: ensure dma is terminated ASoC: fsi: bugfix: correct dma area ASoC: fsi: bugfix: enable master clock control on DMA stream ASoC: imx-ssi: Use clk_prepare_enable/clk_disable_unprepare
2012-05-31Merge tag 'asoc-3.5' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: A few bug fixes for the merge window Small driver-specific updates.
2012-05-31ALSA: hdspm - Work around broken DDS value on PCI RME MADIAdrian Knoth
On PCI RME MADI cards, the PLL register does not contain the proper value, so the calculated system_sample_rate is wrong. In this case, we simply return the cached rate from struct hdspm. Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-05-31ALSA: usb-audio: fix rate_list memory leakClemens Ladisch
The array of sample rates is reallocated every time when opening the PCM device, but was freed only once when unplugging the device. Reported-by: "Alexander E. Patrakov" <patrakov@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-05-30ASoC: fsi: bugfix: ensure dma is terminatedKuninori Morimoto
FSI DMAEngine has to be stopped certainly at the start/stop time. Without this patch, it will include noise on playback. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-30ASoC: fsi: bugfix: correct dma areaKuninori Morimoto
FSI driver is using dma_sync_single_xxx(), but the dma area was not correct. This patch fix it up. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-30ASoC: fsi: bugfix: enable master clock control on DMA streamKuninori Morimoto
DMA stream handler didn't care about master clock. This patch fixes it up. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-28ASoC: imx-ssi: Use clk_prepare_enable/clk_disable_unprepareFabio Estevam
Fix the following kernel crash: ------------[ cut here ]------------ WARNING: at drivers/clk/clk.c:508 __clk_enable+0x9c/0xa8() Modules linked in: Backtrace: [<80011ef4>] (dump_backtrace+0x0/0x10c) from [<803fd48c>] (dump_stack+0x18/0x1c) r7:00000009 r6:000001fc r5:803002ac r4:00000000 [<803fd474>] (dump_stack+0x0/0x1c) from [<8002003c>] (warn_slowpath_common+0x54/0x6c) [<8001ffe8>] (warn_slowpath_common+0x0/0x6c) from [<80020078>] (warn_slowpath_null+0x24/0x2c) r9:00000090 r8:8600e2c0 r7:8605c808 r6:8605c800 r5:8605d780 r4:8600e2c0 [<80020054>] (warn_slowpath_null+0x0/0x2c) from [<803002ac>] (__clk_enable+0x9c/0xa8) [<80300210>] (__clk_enable+0x0/0xa8) from [<803002d0>] (clk_enable+0x18/0x30) r5:8605d780 r4:80000013 [<803002b8>] (clk_enable+0x0/0x30) from [<803247c4>] (imx_ssi_probe+0xa0/0x4f4) r5:8605d780 r4:86174180 [<80324724>] (imx_ssi_probe+0x0/0x4f4) from [<8022b0fc>] (platform_drv_probe+0x20/0x24) [<8022b0dc>] (platform_drv_probe+0x0/0x24) from [<80229c40>] (driver_probe_device+0x80/0x1f0) [<80229bc0>] (driver_probe_device+0x0/0x1f0) from [<80229e44>] (__driver_attach+0x94/0x98) r9:00000090 r8:805b7800 r7:00000000 r6:8605c83c r5:805b1b44 r4:8605c808 [<80229db0>] (__driver_attach+0x0/0x98) from [<8022856c>] (bus_for_each_dev+0x68/0x94) r7:00000000 r6:80229db0 r5:86033eb0 r4:805b1b44 [<80228504>] (bus_for_each_dev+0x0/0x94) from [<80229aa0>] (driver_attach+0x20/0x28) r7:00000000 r6:86174100 r5:8059f6d0 r4:805b1b44 [<80229a80>] (driver_attach+0x0/0x28) from [<80228d50>] (bus_add_driver+0x18c/0x268) [<80228bc4>] (bus_add_driver+0x0/0x268) from [<8022a474>] (driver_register+0x80/0x134) [<8022a3f4>] (driver_register+0x0/0x134) from [<8022b4a4>] (platform_driver_register+0x4c/0x60) r7:00000000 r6:805b7800 r5:00000018 r4:86032000 [<8022b458>] (platform_driver_register+0x0/0x60) from [<80556890>] (imx_ssi_driver_init+0x14/0x1c) [<8055687c>] (imx_ssi_driver_init+0x0/0x1c) from [<8000868c>] (do_one_initcall+0x40/0x194) [<8000864c>] (do_one_initcall+0x0/0x194) from [<8052f3b0>] (kernel_init+0x114/0x1f0) [<8052f29c>] (kernel_init+0x0/0x1f0) from [<8002445c>] (do_exit+0x0/0x788) ---[ end trace d4aa739205917dbb ]--- asoc: mc13783-hifi <-> imx-ssi.0 mapping ok Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-26Merge tag 'clock' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull arm-soc clock driver changes from Olof Johansson: "The new clock subsystem was merged in linux-3.4 without any users, this now moves the first three platforms over to it: imx, mxs and spear. The series also contains the changes for the clock subsystem itself, since Mike preferred to have it together with the platforms that require these changes, in order to avoid interdependencies and conflicts." Fix up trivial conflicts in arch/arm/mach-kirkwood/common.c (code removed in one branch, added OF support in another) and drivers/dma/imx-sdma.c (independent changes next to each other). * tag 'clock' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (97 commits) clk: Fix CLK_SET_RATE_GATE flag validation in clk_set_rate(). clk: Provide dummy clk_unregister() SPEAr: Update defconfigs SPEAr: Add SMI NOR partition info in dts files SPEAr: Switch to common clock framework SPEAr: Call clk_prepare() before calling clk_enable SPEAr: clk: Add General Purpose Timer Synthesizer clock SPEAr: clk: Add Fractional Synthesizer clock SPEAr: clk: Add Auxiliary Synthesizer clock SPEAr: clk: Add VCO-PLL Synthesizer clock SPEAr: Add DT bindings for SPEAr's timer ARM i.MX: remove now unused clock files ARM: i.MX6: implement clocks using common clock framework ARM i.MX35: implement clocks using common clock framework ARM i.MX5: implement clocks using common clock framework ARM: Kirkwood: Replace clock gating ARM: Orion: Audio: Add clk/clkdev support ARM: Orion: PCIE: Add support for clk ARM: Orion: XOR: Add support for clk ARM: Orion: CESA: Add support for clk ...
2012-05-25Merge tag 'sound-3.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound update from Takashi Iwai: "This is the second updates for 3.5-rc1. It's mainly for OMAP4 HDMI updates and the device tree updates for OMAP, in addition to a couple of PCM accuray improvement and Realtek ALC269VD codec support." * tag 'sound-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (21 commits) ALSA: hda/realtek - Add new codec support for ALC269VD ALSA: core: group read of pointer, tstamp and jiffies ASoC: OMAP: HDMI: Rename sound card source file ASoC: OMAP: HDMI: Make sound card naming more generic ASoC: OMAP: HDMI: Make build config options more generic ASoC: OMAP: HDMI: Expand capabilities of the HDMI DAI ASoC: OMAP: HDMI: Improve how the display state is verified ASoC: OMAP: HDMI: Expand configuration of hw_params ASoC: OMAP: HDMI: Use the DSS audio interface ASoC: OMAP: HDMI: Create a structure for private data of the CPU DAI ASoC: OMAP: HDMI: Change error values in HDMI CPU DAI ASoC: OMAP: HDMI: Update the platform device names ASoC: omap-abe-twl6040: Introduce driver data for runtime parameters ASoC: omap-abe-twl6040: Move Digital Mic widget into dapm table ASoC: omap-abe-twl6040: Keep only one snd_soc_dai_link structure ASoC: omap-dmic: Add device tree bindings ASoC: omap-mcpdm: Add device tree bindings ASoC: omap-mcbsp: buffer size constraint only applies to playback stream ASoC: omap-mcbsp: Use the common interrupt line if supported by the SoC ASoC: omap-mcbsp: Remove unused FRAME dma_op_mode ...
2012-05-25Merge tag 'hda-switcheroo' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull VGA-switcheroo audio client support for HD-audio from Takashi Iwai. This depended on the recent drm pull. * tag 'hda-switcheroo' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - unlock on error in azx_interrupt() ALSA: hda - Support VGA-switcheroo ALSA: hda - Export snd_hda_lock_devices() ALSA: hda - Check the dead HDMI audio controller by vga-switcheroo
2012-05-25ALSA: hda/realtek - Add new codec support for ALC269VDKailang Yang
Also fix some settings applied only for ALC269VB. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-05-24Merge tag 'firewire-updates' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394 Pull IEEE 1394 (FireWire) subsystem updates from Stefan Richter: - Fix mismatch between DMA mapping direction (was wrong) and DMA synchronization direction (was correct) of isochronous reception buffers of userspace drivers if vma-mapped for R/W access. For example, libdc1394 was affected. - more consistent retry stategy in device discovery/ rediscovery, and improved failure diagnostics - various small cleanups, e.g. use SCSI layer's DMA mapping API in firewire-sbp2 * tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: sbp2: document the absence of alignment requirements firewire: sbp2: remove superfluous blk_queue_max_segment_size() call firewire: sbp2: use scsi_dma_(un)map firewire: sbp2: give correct DMA device to scsi framework firewire: core: fw_device_refresh(): clean up error handling firewire: core: log config rom reading errors firewire: core: log error in case of failed bus manager lock firewire: move rcode_string() to core firewire: core: improve reread_config_rom() interface firewire: core: wait for inaccessible devices after bus reset firewire: ohci: omit spinlock IRQ flags where possible firewire: ohci: correct signedness of a local variable firewire: core: fix DMA mapping direction firewire: use module_pci_driver
2012-05-24Merge branch 'v4l_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - some V4L2 API updates needed by embedded devices - DVB API extensions for ATSC-MH delivery system, used in US for mobile TV - new tuners for fc0011/0012/0013 and tua9001 - a new dvb driver for af9033/9035 - a new ATSC-MH frontend (lg2160) - new remote controller keymaps - Removal of a few legacy webcam driver that got replaced by gspca on several kernel versions ago - a new driver for Exynos 4/5 webcams(s5pp fimc-lite) - a new webcam sensor driver (smiapp) - a new video input driver for embedded (sta2x1xx) - several improvements, fixes, cleanups, etc inside the drivers. Manually fix up conflicts due to err() -> dev_err() conversion in drivers/staging/media/easycap/easycap_main.c * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (484 commits) [media] saa7134-cards: Remove a PCI entry added by mistake [media] radio-sf16fmi: add support for SF16-FMD [media] rc-loopback: remove duplicate line [media] patch for Asus My Cinema PS3-100 (1043:48cd) [media] au0828: Move the Kconfig knob under V4L_USB_DRIVERS [media] em28xx: simple comment fix [media] [resend] radio-sf16fmr2: add PnP support for SF16-FMD2 [media] smiapp: Use v4l2_ctrl_new_int_menu() instead of v4l2_ctrl_new_custom() [media] smiapp: Add support for 8-bit uncompressed formats [media] smiapp: Allow generic quirk registers [media] smiapp: Use non-binning limits if the binning limit is zero [media] smiapp: Initialise rval in smiapp_read_nvm() [media] smiapp: Round minimum pre_pll up rather than down in ip_clk_freq check [media] smiapp: Use 8-bit reads only before identifying the sensor [media] smiapp: Quirk for sensors that only do 8-bit reads [media] smiapp: Pass struct sensor to register writing commands instead of i2c_client [media] smiapp: Allow using external clock from the clock framework [media] zl10353: change .read_snr() to report SNR as a 0.1 dB [media] media: add support to gspca/pac7302.c for 093a:2627 (Genius FaceCam 300) [media] m88rs2000 - only flip bit 2 on reg 0x70 on 16th try ...
2012-05-23Merge tag 'sound-3.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "This is the first big chunk for 3.5 merges of sound stuff. There are a few big changes in different areas. First off, the streaming logic of USB-audio endpoints has been largely rewritten for the better support of "implicit feedback". If anything about USB got broken, this change has to be checked. For HD-audio, the resume procedure was changed; instead of delaying the resume of the hardware until the first use, now waking up immediately at resume. This is for buggy BIOS. For ASoC, dynamic PCM support and the improved support for digital links between off-SoC devices are major framework changes. Some highlights are below: * HD-audio - Avoid accesses of invalid pin-control bits that may stall the codec - V-ref setup cleanups - Fix the races in power-saving code - Fix the races in codec cache hashes and connection lists - Split some common codes for BIOS auto-parser to hda_auto_parser.c - Changed the PM resume code to wake up immediately for buggy BIOS - Creative SoundCore3D support - Add Conexant CX20751/2/3/4 codec support * ASoC - Dynamic PCM support, allowing support for SoCs with internal routing through components with tight sequencing and formatting constraints within their internal paths or where there are multiple components connected with CPU managed DMA controllers inside the SoC. - Greatly improved support for direct digital links between off-SoC devices, providing a much simpler way of connecting things like digital basebands to CODECs. - Much more fine grained and robust locking, cleaning up some of the confusion that crept in with multi-component. - CPU support for nVidia Tegra 30 I2S and audio hub controllers and ST-Ericsson MSP I2S controolers - New CODEC drivers for Cirrus CS42L52, LAPIS Semiconductor ML26124, Texas Instruments LM49453. - Some regmap changes needed by the Tegra I2S driver. - mc13783 audio support. * Misc - Rewrite with module_pci_driver() - Xonar DGX support for snd-oxygen - Improvement of packet handling in snd-firewire driver - New USB-endpoint streaming logic - Enhanced M-audio FTU quirks and relevant cleanups - Increment the support of OSS devices to 256 - snd-aloop accuracy improvement There are a few more pending changes for 3.5, but they will be sent slightly later as partly depending on the changes of DRM." Fix up conflicts in regmap (due to duplicate patches, with some further updates then having already come in from the regmap tree). Also some fairly trivial context conflicts in the imx and mcx soc drivers. * tag 'sound-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (280 commits) ALSA: snd-usb: fix stream info output in /proc ALSA: pcm - Add proper state checks to snd_pcm_drain() ALSA: sh: Fix up namespace collision in sh_dac_audio. ALSA: hda/realtek - Fix unused variable compile warning ASoC: sh: fsi: enable chip specific data transfer mode ASoC: sh: fsi: call fsi_hw_startup/shutdown from fsi_dai_trigger() ASoC: sh: fsi: use same format for IN/OUT ASoC: sh: fsi: add fsi_version() and removed meaningless version check ASoC: sh: fsi: use register field macro name on IN/OUT_DMAC ASoC: tegra: Add machine driver for WM8753 codec ALSA: hda - Fix possible races of accesses to connection list array ASoC: OMAP: HDMI: Introduce codec ARM: mx31_3ds: Add sound support ASoC: imx-mc13783 cleanup mx31moboard: Add sound support ASoC: mc13783 codec cleanups ASoC: add imx-mc13783 sound support ASoC: Add mc13783 codec mfd: mc13xxx: add codec platform data ASoC: don't flip master of DT-instantiated DAI links ...
2012-05-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial updates from Jiri Kosina: "As usual, it's mostly typo fixes, redundant code elimination and some documentation updates." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (57 commits) edac, mips: don't change code that has been removed in edac/mips tree xtensa: Change mail addresses of Hannes Weiner and Oskar Schirmer lib: Change mail address of Oskar Schirmer net: Change mail address of Oskar Schirmer arm/m68k: Change mail address of Sebastian Hess i2c: Change mail address of Oskar Schirmer net: Fix tcp_build_and_update_options comment in struct tcp_sock atomic64_32.h: fix parameter naming mismatch Kconfig: replace "--- help ---" with "---help---" c2port: fix bogus Kconfig "default no" edac: Fix spelling errors. qla1280: Remove redundant NULL check before release_firmware() call remoteproc: remove redundant NULL check before release_firmware() qla2xxx: Remove redundant NULL check before release_firmware() call. aic94xx: Get rid of redundant NULL check before release_firmware() call tehuti: delete redundant NULL check before release_firmware() qlogic: get rid of a redundant test for NULL before call to release_firmware() bna: remove redundant NULL test before release_firmware() tg3: remove redundant NULL test before release_firmware() call typhoon: get rid of redundant conditional before all to release_firmware() ...
2012-05-23ALSA: core: group read of pointer, tstamp and jiffiesPierre-Louis Bossart
Group read of hw_ptr, tstamp and jiffies in a sequence for better correlation. Previous code took timestamp at the end, which could introduce delays between audio time and system time. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-05-23Merge branch 'for-3.5' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/asoc into topic/asoc
2012-05-22Merge tag 'pinctrl' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull arm soc-specific pinctrl changes from Olof Johansson: "With this, five platforms are moving to the relatively new pinctrl subsystem for their pin management, replacing the older soc specific in-kernel interfaces with common code. There is quite a bit of net addition of code for each platform being added to the pinctrl subsystem. But the payback comes later when adding new boards can be done by only providing new device trees instead." Fix up trivial conflicts in arch/arm/mach-ux500/{Makefile,board-mop500.c} * tag 'pinctrl' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (61 commits) mtd: nand: gpmi: fix compile error caused by pinctrl call ARM: PRIMA2: select PINCTRL and PINCTRL_SIRF in Kconfig ARM: nomadik: enable PINCTRL_NOMADIK where needed ARM: mxs: enable pinctrl support video: mxsfb: adopt pinctrl support ASoC: mxs-saif: adopt pinctrl support i2c: mxs: adopt pinctrl support mtd: nand: gpmi: adopt pinctrl support mmc: mxs-mmc: adopt pinctrl support serial: mxs-auart: adopt pinctrl support serial: amba-pl011: adopt pinctrl support spi/imx: adopt pinctrl support i2c: imx: adopt pinctrl support can: flexcan: adopt pinctrl support net: fec: adopt pinctrl support ARM: ux500: switch MSP to using pinctrl for pins ARM: ux500: alter MSP registration to return a device pointer ARM: ux500: switch to using pinctrl for uart0 ARM: ux500: delete custom pin control system ARM: ux500: switch over to Nomadik pinctrl driver ...
2012-05-22ASoC: OMAP: HDMI: Rename sound card source fileRicardo Neri
Rename sound card driver source file to encompass not only OMAP4 but future OMAP versions that feature HDMI. Signed-off-by: Ricardo Neri <ricardo.neri@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-05-22ASoC: OMAP: HDMI: Make sound card naming more genericRicardo Neri
Rename all the relevant structures, variables and functions to not make specific reference to OMAP4. This is to make the driver encompass future OMAP versions that feature HDMI and not only OMAP4. These changes are only in naming. There are not functional changes. Signed-off-by: Ricardo Neri <ricardo.neri@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-05-22ASoC: OMAP: HDMI: Make build config options more genericRicardo Neri
Make Kconfig and Makefile more generic to encompass not only OMAP4 but other OMAP processors featuring HDMI. Also, relax the dependency list to depend only on any OMAP processor supporting OMAP2_DSS and OMAP4_DSS_HDMI. As HDMI support for future OMAP versions is added, the dependency list must change accordingly. Signed-off-by: Ricardo Neri <ricardo.neri@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@ti.com>