regulator: ab8500: add regulators for sysclkreq

These regulators control power to the wireless LAN and bluetooth chips.

Change-Id: I08a7a57080ed714eb16d5532cf5ec02eb45dc2a7
Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com>
Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32099
Tested-by: Jonas ABERG <jonas.aberg@stericsson.com>

3 files changed, 141 insertions, 1 deletions

diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c
index 65afa0f76d0..a8d7230e31e 100644
--- a/arch/arm/mach-ux500/board-mop500-regulators.c
+++ b/arch/arm/mach-ux500/board-mop500-regulators.c
@@ -86,6 +86,13 @@ static struct regulator_consumer_supply ab8500_vana_consumers[] = {
 	REGULATOR_SUPPLY("vsmps2", "mcde.0"),
 };
 
+static struct regulator_consumer_supply ab8500_sysclkreq_2_consumers[] = {
+};
+
+static struct regulator_consumer_supply ab8500_sysclkreq_4_consumers[] = {
+
+};
+
 /* ab8500 regulator register initialization */
 struct ab8500_regulator_reg_init
 ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = {
@@ -394,4 +401,24 @@ struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = {
 		.num_consumer_supplies = ARRAY_SIZE(ab8500_vana_consumers),
 		.consumer_supplies = ab8500_vana_consumers,
 	},
+	/* sysclkreq 2 pin */
+	[AB8500_SYSCLKREQ_2] = {
+		.constraints = {
+			.name = "V-SYSCLKREQ-2",
+			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+		},
+		.num_consumer_supplies =
+			ARRAY_SIZE(ab8500_sysclkreq_2_consumers),
+		.consumer_supplies = ab8500_sysclkreq_2_consumers,
+	},
+	/* sysclkreq 4 pin */
+	[AB8500_SYSCLKREQ_4] = {
+		.constraints = {
+			.name = "V-SYSCLKREQ-4",
+			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+		},
+		.num_consumer_supplies =
+			ARRAY_SIZE(ab8500_sysclkreq_4_consumers),
+		.consumer_supplies = ab8500_sysclkreq_4_consumers,
+	},
 };
diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c
index eef2d32a5dc..867493b8355 100644
--- a/drivers/regulator/ab8500.c
+++ b/drivers/regulator/ab8500.c
@@ -20,6 +20,7 @@
 #include <linux/regulator/driver.h>
 #include <linux/regulator/machine.h>
 #include <linux/regulator/ab8500.h>
+#include <linux/mfd/ab8500/gpio.h> /* for sysclkreq pins */
 
 /**
  * struct ab8500_regulator_info - ab8500 regulator information
@@ -39,6 +40,7 @@
  * @voltages: supported voltage table
  * @voltages_len: number of supported voltages for the regulator
  * @delay: startup/set voltage delay in us
+ * @gpio_pin: ab8500 gpio pin offset number (for sysclkreq regulator only)
  */
 struct ab8500_regulator_info {
 	struct device		*dev;
@@ -57,6 +59,7 @@ struct ab8500_regulator_info {
 	int const *voltages;
 	int voltages_len;
 	unsigned int delay;
+	enum ab8500_pin gpio_pin;
 };
 
 /* voltage tables for the vauxn/vintcore supplies */
@@ -348,6 +351,88 @@ static struct regulator_ops ab8500_regulator_fixed_ops = {
 	.set_voltage_time_sel = ab8500_regulator_set_voltage_time_sel,
 };
 
+static int ab8500_sysclkreq_enable(struct regulator_dev *rdev)
+{
+	int ret;
+	struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
+
+	if (info == NULL) {
+		dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
+		return -EINVAL;
+	}
+
+	ret = ab8500_gpio_config_select(info->dev, info->gpio_pin, false);
+	if (ret < 0) {
+		dev_err(rdev_get_dev(rdev),
+			"couldn't set sysclkreq pin selection\n");
+		return ret;
+	}
+
+	dev_vdbg(rdev_get_dev(rdev),
+		"%s-enable (gpio_pin, gpio_select): %i, false\n",
+		info->desc.name, info->gpio_pin);
+
+	return ret;
+}
+
+static int ab8500_sysclkreq_disable(struct regulator_dev *rdev)
+{
+	int ret;
+	struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
+
+	if (info == NULL) {
+		dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
+		return -EINVAL;
+	}
+
+	ret = ab8500_gpio_config_select(info->dev, info->gpio_pin, true);
+	if (ret < 0) {
+		dev_err(rdev_get_dev(rdev),
+			"couldn't set gpio pin selection\n");
+		return ret;
+	}
+
+	dev_vdbg(rdev_get_dev(rdev),
+		"%s-disable (gpio_pin, gpio_select): %i, true\n",
+		info->desc.name, info->gpio_pin);
+
+	return ret;
+}
+
+static int ab8500_sysclkreq_is_enabled(struct regulator_dev *rdev)
+{
+	int ret;
+	struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
+	bool gpio_select;
+
+	if (info == NULL) {
+		dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
+		return -EINVAL;
+	}
+
+	ret = ab8500_gpio_config_get_select(info->dev, info->gpio_pin,
+		&gpio_select);
+	if (ret < 0) {
+		dev_err(rdev_get_dev(rdev),
+			"couldn't read gpio pin selection\n");
+		return ret;
+	}
+
+	dev_vdbg(rdev_get_dev(rdev),
+		"%s-is_enabled (gpio_pin, is_enabled): %i, %i\n",
+		info->desc.name, info->gpio_pin, !gpio_select);
+
+	return !gpio_select;
+}
+
+static struct regulator_ops ab8500_sysclkreq_ops = {
+	.enable		= ab8500_sysclkreq_enable,
+	.disable	= ab8500_sysclkreq_disable,
+	.is_enabled	= ab8500_sysclkreq_is_enabled,
+	.get_voltage	= ab8500_fixed_get_voltage,
+	.list_voltage	= ab8500_list_voltage,
+};
+
 static struct ab8500_regulator_info
 		ab8500_regulator_info[AB8500_NUM_REGULATORS] = {
 	/*
@@ -553,7 +638,33 @@ static struct ab8500_regulator_info
 		.update_val_enable	= 0x04,
 	},
 
-
+	/*
+	 * SysClkReq regulators
+	 */
+	[AB8500_SYSCLKREQ_2] = {
+		.desc = {
+			.name		= "SYSCLKREQ-2",
+			.ops		= &ab8500_sysclkreq_ops,
+			.type		= REGULATOR_VOLTAGE,
+			.id		= AB8500_SYSCLKREQ_2,
+			.owner		= THIS_MODULE,
+			.n_voltages	= 1,
+		},
+		.fixed_uV		= 1, /* bogus value */
+		.gpio_pin		= AB8500_PIN_GPIO1,
+	},
+	[AB8500_SYSCLKREQ_4] = {
+		.desc = {
+			.name		= "SYSCLKREQ-4",
+			.ops		= &ab8500_sysclkreq_ops,
+			.type		= REGULATOR_VOLTAGE,
+			.id		= AB8500_SYSCLKREQ_4,
+			.owner		= THIS_MODULE,
+			.n_voltages	= 1,
+		},
+		.fixed_uV		= 1, /* bogus value */
+		.gpio_pin		= AB8500_PIN_GPIO3,
+	},
 };
 
 struct ab8500_reg_init {
diff --git a/include/linux/regulator/ab8500.h b/include/linux/regulator/ab8500.h
index 707226c8656..5eb1f7d1ae0 100644
--- a/include/linux/regulator/ab8500.h
+++ b/include/linux/regulator/ab8500.h
@@ -23,6 +23,8 @@ enum ab8500_regulator_id {
 	AB8500_LDO_ANAMIC2,
 	AB8500_LDO_DMIC,
 	AB8500_LDO_ANA,
+	AB8500_SYSCLKREQ_2,
+	AB8500_SYSCLKREQ_4,
 	AB8500_NUM_REGULATORS,
 };