diff options
Diffstat (limited to 'drivers/usb/host/isp1763.h')
| -rw-r--r-- | drivers/usb/host/isp1763.h | 224 |
1 files changed, 224 insertions, 0 deletions
diff --git a/drivers/usb/host/isp1763.h b/drivers/usb/host/isp1763.h new file mode 100644 index 00000000000..ae4a9908905 --- /dev/null +++ b/drivers/usb/host/isp1763.h @@ -0,0 +1,224 @@ +/*
+* Copyright (C) ST-Ericsson AP Pte Ltd 2010
+*
+* ISP1763 Linux OTG Controller driver : hal
+*
+* This program is free software; you can redistribute it and/or modify it under the terms of
+* the GNU General Public License as published by the Free Software Foundation; version
+* 2 of the License.
+*
+* This program is distributed in the hope that it will be useful, but WITHOUT ANY
+* WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+* FOR A PARTICULAR PURPOSE. See the GNU General Public License for more
+* details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program; if not, write to the Free Software
+* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+*
+* This is a hardware abstraction layer header file.
+*
+* Author : wired support <wired.support@stericsson.com>
+*
+*/
+
+#ifndef ISP1763_H
+#define ISP1763_H
+
+
+
+/* For debugging option: ------------------- */
+#define PTD_DUMP_SCHEDULE
+#undef PTD_DUMP_SCHEDULE
+
+#define PTD_DUMP_COMPLETE
+#undef PTD_DUMP_COMPLETE
+/* ------------------------------------*/
+#define CONFIG_ISO_SUPPORT
+
+#ifdef CONFIG_ISO_SUPPORT
+
+#define ISO_DBG_ENTRY 1
+#define ISO_DBG_EXIT 1
+#define ISO_DBG_ADDR 1
+#define ISO_DBG_DATA 1
+#define ISO_DBG_ERR 1
+#define ISO_DBG_INFO 1
+
+#if 0 /* Set to 1 to enable isochronous debugging */
+#define iso_dbg(category, format, arg...) \
+do \
+{ \
+ if(category) \
+ { \
+ printk(format, ## arg); \
+ } \
+} while(0)
+#else
+#define iso_dbg(category, format, arg...) while(0)
+#endif
+
+#endif /* CONFIG_ISO_SUPPORT */
+
+/*Debug For Entry/Exit of the functions */
+//#define HCD_DEBUG_LEVEL1
+#ifdef HCD_DEBUG_LEVEL1
+#define pehci_entry(format, args... ) printk(format, ##args)
+#else
+#define pehci_entry(format, args...) do { } while(0)
+#endif
+
+/*Debug for Port Info and Errors */
+//#define HCD_DEBUG_LEVEL2
+#ifdef HCD_DEBUG_LEVEL2
+#define pehci_print(format, args... ) printk(format, ##args)
+#else
+#define pehci_print(format, args...) do { } while(0)
+#endif
+
+/*Debug For the Port changes and Enumeration */
+//#define HCD_DEBUG_LEVEL3
+#ifdef HCD_DEBUG_LEVEL3
+#define pehci_info(format,arg...) printk(format, ##arg)
+#else
+#define pehci_info(format,arg...) do {} while (0)
+#endif
+
+/*Debug For Transfer flow */
+//#define HCD_DEBUG_LEVEL4
+#ifdef HCD_DEBUG_LEVEL4
+#define pehci_check(format,args...) printk(format, ##args)
+#else
+#define pehci_check(format,args...)
+#endif
+/*******************END HOST CONTROLLER**********************************/
+
+
+
+/*******************START DEVICE CONTROLLER******************************/
+
+/* For MTP support */
+#undef MTP_ENABLE /* Enable to add MTP support; But requires MTP class driver to be present to work */
+/*For CHAPTER8 TEST */
+#undef CHAPTER8_TEST /* Enable to Pass Chapter 8 Test */
+
+/* Debug Entery/Exit of Function as well as some other Info */
+//#define DEV_DEBUG_LEVEL2
+#ifdef DEV_DEBUG_LEVEL2
+#define dev_print(format,arg...) printk(format, ##arg)
+#else
+#define dev_print(format,arg...) do {} while (0)
+#endif
+
+/*Debug for Interrupt , Registers , device Enable/Disable and some other info */
+//#define DEV_DEBUG_LEVEL3
+//#ifdef DEV_DEBUG_LEVEL3
+//#define dev_info(format,arg...) printk(format, ##arg)
+//#else
+//#define dev_info(format,arg...) do {} while (0)
+//#endif
+
+/*Debug for Tranffer flow , Enumeration and Packet info */
+//#define DEV_DEBUG_LEVEL4
+#ifdef DEV_DEBUG_LEVEL4
+#define dev_check(format,args...) printk(format, ##args)
+#else
+#define dev_check(format,args...) do{}while(0)
+#endif
+/*******************END DEVICE CONTROLLER********************************/
+
+
+/*******************START MSCD*******************************************/
+/*Debug Entery/Exit of Function as well as some other Information*/
+//#define MSCD_DEBUG_LEVEL2
+#ifdef MSCD_DEBUG_LEVEL2
+#define mscd_print(format,arg...) printk(format, ##arg)
+#else
+#define mscd_print(format,arg...) do {} while (0)
+#endif
+
+/*Debug for Info */
+//#define MSCD_DEBUG_LEVEL3
+#ifdef MSCD_DEBUG_LEVEL3
+#define mscd_info(format,arg...) printk(format, ##arg)
+#else
+#define mscd_info(format,arg...) do {} while (0)
+#endif
+/*******************END MSCD*********************************************/
+
+
+/*******************START OTG CONTROLLER*********************************/
+#define OTG /*undef for Device only and Host only */
+#define ALL_FSM_FLAGS
+/*Debug for Entry/Exit and Info */
+/* #define OTG_DEBUG_LEVEL1 */
+#ifdef OTG_DEBUG_LEVEL1
+#define otg_entry(format, args... ) printk(format, ##args)
+#else
+#define otg_entry(format, args...) do { } while(0)
+#endif
+
+/*Debug for State Machine Flow */
+/* #define OTG_DEBUG_LEVEL2 */
+#ifdef OTG_DEBUG_LEVEL2
+#define otg_print(format,arg...) printk(format, ##arg)
+#else
+#define otg_print(format,arg...) do {} while (0)
+#endif
+/*Debug for Info */
+/* #define OTG_DEBUG_LEVEL3 */
+#ifdef OTG_DEBUG_LEVEL3
+#define otg_info(format,arg...) printk(format, ##arg)
+#else
+#define otg_info(format,arg...) do {} while (0)
+#endif
+
+/* #define OTG_DEBUG_LEVEL4 */
+#ifdef OTG_DEBUG_LEVEL4
+#define otg_printB(format,arg...) printk(format, ##arg)
+#else
+#define otg_printB(format,arg...) do {} while (0)
+#endif
+/*******************END OTG CONTROLLER***********************************/
+
+
+
+/*******************START FOR HAL ***************************************/
+/*Debug For Entry and Exit of the functions */
+//#define HAL_DEBUG_LEVEL1
+#ifdef HAL_DEBUG_LEVEL1
+#define hal_entry(format, args... ) printk(format, ##args)
+#else
+#define hal_entry(format, args...) do { } while(0)
+#endif
+
+/*Debug For Interrupt information */
+//#define HAL_DEBUG_LEVEL2
+#ifdef HAL_DEBUG_LEVEL2
+#define hal_int(format, args... ) printk(format, ##args)
+#else
+#define hal_int(format, args...) do { } while(0)
+#endif
+
+/*Debug For HAL Initialisation and Mem Initialisation */
+//#define HAL_DEBUG_LEVEL3
+#ifdef HAL_DEBUG_LEVEL3
+#define hal_init(format, args... ) printk(format, ##args)
+#else
+#define hal_init(format, args...) do { } while(0)
+#endif
+/*******************END FOR HAL*******************************************/
+
+
+
+/*******************START FOR ALL CONTROLLERS*****************************/
+#undef CONFIG_USB_OTG /*undef for Device only and Host only */
+#define ISP1763_DEVICE
+
+#ifdef CONFIG_USB_DEBUG
+#define DEBUG
+#else
+#undef DEBUG
+#endif
+/*******************END FOR ALL CONTROLLERS*******************************/
+#endif
|