/*
 * Copyright (C) ST-Ericsson SA 2010
 *
 * License terms: GNU General Public License (GPL) version 2
 */

#ifndef __BOARD_MOP500_H
#define __BOARD_MOP500_H

/* This defines the NOMADIK_NR_GPIO */
#include <linux/mfd/ab8500/gpio.h>
#include <mach/gpio.h>

/* HREFv60-specific GPIO assignments, this board has no GPIO expander */
#define HREFV60_TOUCH_RST_GPIO		143
#define HREFV60_PROX_SENSE_GPIO		217
#define HREFV60_HAL_SW_GPIO		145
#define HREFV60_SDMMC_EN_GPIO		169
#define HREFV60_SDMMC_1V8_3V_GPIO	5
#define HREFV60_SDMMC_CD_GPIO		95
#define HREFV60_ACCEL_INT1_GPIO		82
#define HREFV60_ACCEL_INT2_GPIO		83
#define HREFV60_MAGNET_DRDY_GPIO	32
#define HREFV60_DISP1_RST_GPIO		65
#define HREFV60_DISP2_RST_GPIO		66
#define HREFV60_MMIO_XENON_CHARGE 	170
#define HREFV60_XSHUTDOWN_SECONDARY_SENSOR 140
#define HREFV60_CAMERA_FLASH_ENABLE	21
#define XSHUTDOWN_PRIMARY_SENSOR 	141
#define XSHUTDOWN_SECONDARY_SENSOR 	142
#define CAMERA_FLASH_INT_PIN		7
#define CYPRESS_TOUCH_INT_PIN 84
#define CYPRESS_TOUCH_RST_GPIO 143
#define CYPRESS_SLAVE_SELECT_GPIO 216
/* MOP500 generic GPIOs */
#define MOP500_HDMI_RST_GPIO		196

/* GPIOs on the TC35892 expander */
#define GPIO_MAGNET_DRDY		MOP500_EGPIO(1)
#define GPIO_SDMMC_CD			MOP500_EGPIO(3)
#define GPIO_CAMERA_FLASH_ENABLE	MOP500_EGPIO(4)
#define GPIO_MMIO_XENON_CHARGE 		MOP500_EGPIO(5)
#define GPIO_PROX_SENSOR		MOP500_EGPIO(7)
#define GPIO_HAL_SENSOR			MOP500_EGPIO(8)
#define GPIO_ACCEL_INT1			MOP500_EGPIO(10)
#define GPIO_ACCEL_INT2			MOP500_EGPIO(11)
#define GPIO_BU21013_CS			MOP500_EGPIO(13)
#define MOP500_DISP2_RST_GPIO		MOP500_EGPIO(14)
#define MOP500_DISP1_RST_GPIO		MOP500_EGPIO(15)
#define GPIO_SDMMC_EN			MOP500_EGPIO(17)
#define GPIO_SDMMC_1V8_3V_SEL		MOP500_EGPIO(18)

/* Snowball GPIO for MMC card */
#define SNOWBALL_SDMMC_EN_GPIO		217
#define SNOWBALL_SDMMC_1V8_3V_GPIO	228
#define SNOWBALL_SDMMC_CD_GPIO		218

/* Snowball specific GPIO assignments, this board has no GPIO expander */
#define SNOWBALL_ACCEL_INT1_GPIO	163
#define SNOWBALL_ACCEL_INT2_GPIO	164
#define SNOWBALL_MAGNET_DRDY_GPIO	165

/*Snowball AB8500 GPIO */
#define SNOWBALL_VSMPS2_1V8_GPIO	AB8500_PIN_GPIO1	/* SYSCLKREQ2/GPIO1 */
#define SNOWBALL_PM_GPIO1_GPIO		AB8500_PIN_GPIO2	/* SYSCLKREQ3/GPIO2 */
#define SNOWBALL_WLAN_CLK_REQ_GPIO	AB8500_PIN_GPIO3	/* SYSCLKREQ4/GPIO3 */
#define SNOWBALL_PM_GPIO4_GPIO		AB8500_PIN_GPIO4	/* SYSCLKREQ6/GPIO4 */
#define SNOWBALL_EN_3V6_GPIO		AB8500_PIN_GPIO16	/* PWMOUT3/GPIO16 */
#define SNOWBALL_PME_ETH_GPIO		AB8500_PIN_GPIO24	/* SYSCLKREQ7/GPIO24 */
#define SNOWBALL_EN_3V3_ETH_GPIO	AB8500_PIN_GPIO26	/* GPIO26 */

/*Snowball buttons GPIO */
#define SNOWBALL_USER_PB_GPIO		32
#define SNOWBALL_J1_PIN_8_GPIO		151 /* AP_GPIO151 */
#define SNOWBALL_J1_PIN_9_GPIO		152 /* AP_GPIO152 */
#define SNOWBALL_J1_PIN_14_GPIO		162 /* AP_GPIO162 */

struct i2c_board_info;

extern void mop500_sdi_init(void);
extern void mop500_sdi_tc35892_init(void);
void __init mop500_u8500uib_init(void);
void __init mop500_stuib_init(void);
void __init mop500_msp_init(void);
void __init mop500_pins_init(void);
void __init mop500_vibra_init(void);
void mop500_cyttsp_init(void);
void __init mop500_u8500uib_r3_init(void);

void mop500_uib_i2c_add(int busnum, struct i2c_board_info const *info,
		unsigned n);

int msp13_i2s_init(void);
int msp13_i2s_exit(void);

int uib_is_stuib(void);
int uib_is_u8500uib(void);
int uib_is_u8500uibr3(void);

#endif