Timeout for previously sent request has occurred. Request could be Protrom Command, Bulk transfer, or R15 Command. Invalid parameter found during executing LCDriver initialization functions. Failed to initialize Context. Failed to add the LCDriver context for the new device in the devices list. Try to reconnect the device, if the problem is still present report it. Failed to create interface for loader methods, possibly not enough memory to perform the operation. Try to reconnect the device, if the problem is still present report it. Unknown exception occurred while trying to create context for the connected device. Try to reconnect the device, if the problem is still present report it. Failed to create LCDriver context for the connected device, possibly not enough memory to perform the operation. Try to reconnect the device, if the problem is still present report it. Tried to create LCDriver interface with invalid pointer. Tried to configure device with invalid pointer to LCDriver interface. Create the LCDriver interface for the connected device and try to configure the device later. If the problem is still present report it. The context for the device was previously created. Tried to execute loader method without creating loader method interface. Create the interface first and retry the same operation. If the problem is still present report it. Tried to create LCDriver context with invalid ID for the context. Try to create context with different context ID, if the problem is still present report it. Tried to call loader method before starting the LCDriver context. Try to start the context before calling loader methods, if the problem is still present report it. The LCDriver thread exited in unexpected way. The error is not recognized, if the problem persists report it. Failed to open bulk session due to invalid Bulk Vector ID. Bulk transfer is already in progress. Parallel bulk transfers are not supported Error occurred while communicating the ROM code. Possibly there is some security issue with the used SW/HW. The HW failed to respond during the initialization sequence. Try with other HW, if the problem still exist report it, otherwise probably it faulty HW. The HW initialization failed to start. Try with other HW, if the problem still exist report it, otherwise probably it faulty HW. Failed to execute command because there is other active command. Try to execute command again. If the problem persists probably there is some blocked command. Restart the HW. Callbacks for communication device are not configured. Try to configure device driver callbacks. If the problem persists report it. Received response for command other than it was expected. Probably there is communication error. Restart the HW, if the problem persists report it. Command received from ME other than it was expected. Probably there is communication error. Restart the HW, if the problem persists report it. Canceled execution of active command/communication due to receiving of cancel event. Unexpected event was received during command execution. Unexpected event was received during command execution. Failed to load file from local HDD in RAM. Command execution failed. Failed to open the file with the given path. Check if the file path is correct. Mapping of the file in RAM failed. Try to execute command again, if problem persist try to restart the HW. Failed to create desired view on RAM area of the mapped file. Try to execute command again, if problem persist try to restart the HW. Failed to read file description. Try to execute command again, if problem persist try to restart the HW. Invalid file offset requested. Try to execute command again, if problem persist try to restart the HW. Failed to read data from file. Try to execute command again, if problem persist try to restart the HW. Loading of dependent library failed. Make sure that it is placed on correct location. Some of dependent functions was not found in the given LCM library. Make sure that the version that is used is compatible. Some of functions may not work in the given LCM library. Make sure that the PC LCM version that is used is compatible. Some of functions may not work in the given LCM library. Make sure that the LDR LCM version that is used is compatible. The active operation was stopped by unknown exception. Repeat the failure procedure, if the problem persists report it. The activity didn't complete properly. Unhandled event was received during execution of command/activity. The transfer of bulk data was interrupted by unknown exception. Data was not transferred successfully. Failed to perform desired operation on the LCDriver context due to unknown exception. Execution of LCDriver thread has stopped because the thread was killed with unknown reason. Execution of LCDriver thread has stopped because the thread was killed by cancel event. Execution of LCDriver thread has stopped with shutdown request. Starting of LCDriver thread has failed. An error has occurred during initialization. Reconnect the device, if the problem persist report it. LCDriver thread must be stopped due to unrecoverable error state in the LCM. Reconnect the device, if the problem persist report it. Maximum number of packet retransmission attempts failed. Further communication of device is not possible. Reconnect the device, if the problem persist report it. LCM failed to get response from communication device. Further communication of device is not possible. Reconnect the device, if the problem persist report it.