cm1_qp1 -> cm5200: single U-Boot image for modules from the cm5200 family.

Add the ability for modules from the Schindler cm5200 family to use a
single U-Boot image:
- rename cm1_qp1 to cm5200
- add run-time module detection
- parametrize SDRAM configuration according to the module we are running on

Few minor, board-specific fixes included in this patch:
- better MAC address handling
- updated default environment ('update' command uses +{filesize} now)
- improved error messages in the auto-update code
- allow booting U-Boot from RAM (CFG_RAMBOOT)

Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>

1 files changed, 47 insertions, 0 deletions

diff --git a/board/cm5200/fwupdate.h b/board/cm5200/fwupdate.h
new file mode 100644
index 000000000..4e3f1e164
--- /dev/null
+++ b/board/cm5200/fwupdate.h
@@ -0,0 +1,47 @@
+/*
+ * (C) Copyright 2007 Schindler Lift Inc.
+ *
+ * Author: Michel Marti <mma@objectxp.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __FW_UPDATE_H
+#define __FW_UPDATE_H
+
+/* Default prefix for output messages */
+#define LOG_PREFIX	"CM5200:"
+
+/* Extra debug macro */
+#ifdef CONFIG_FWUPDATE_DEBUG
+#define FW_DEBUG(fmt...) printf(LOG_PREFIX fmt)
+#else
+#define FW_DEBUG(fmt...)
+#endif
+
+/* Name of the directory holding firmware images */
+#define FW_DIR		"nx-fw"
+#define RESCUE_IMAGE	"nxrs.img"
+#define LOAD_ADDR	0x400000
+#define RS_BOOTARGS	"ramdisk=8192K"
+
+/* Main function for fwupdate */
+void cm5200_fwupdate(void);
+
+#endif /* __FW_UPDATE_H */