85xx/86xx: Replace in8/out8 with in_8/out_8 on FSL boards

The pixis code used in8/out8 all over the place.  Replace it with
in_8/out_8 macros.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

2 files changed, 21 insertions, 17 deletions

diff --git a/board/freescale/mpc8610hpcd/mpc8610hpcd.c b/board/freescale/mpc8610hpcd/mpc8610hpcd.c
index 419b2c191..2ac169b79 100644
--- a/board/freescale/mpc8610hpcd/mpc8610hpcd.c
+++ b/board/freescale/mpc8610hpcd/mpc8610hpcd.c
@@ -55,16 +55,17 @@ int board_early_init_f(void)
 int misc_init_r(void)
 {
 	u8 tmp_val, version;
+	u8 *pixis_base = (u8 *)PIXIS_BASE;
 
 	/*Do not use 8259PIC*/
-	tmp_val = in8(PIXIS_BASE + PIXIS_BRDCFG0);
-	out8(PIXIS_BASE + PIXIS_BRDCFG0, tmp_val | 0x80);
+	tmp_val = in_8(pixis_base + PIXIS_BRDCFG0);
+	out_8(pixis_base + PIXIS_BRDCFG0, tmp_val | 0x80);
 
 	/*For FPGA V7 or higher, set the IRQMAPSEL to 0 to use MAP0 interrupt*/
-	version = in8(PIXIS_BASE + PIXIS_PVER);
+	version = in_8(pixis_base + PIXIS_PVER);
 	if(version >= 0x07) {
-		tmp_val = in8(PIXIS_BASE + PIXIS_BRDCFG0);
-		out8(PIXIS_BASE + PIXIS_BRDCFG0, tmp_val & 0xbf);
+		tmp_val = in_8(pixis_base + PIXIS_BRDCFG0);
+		out_8(pixis_base + PIXIS_BRDCFG0, tmp_val & 0xbf);
 	}
 
 	/* Using this for DIU init before the driver in linux takes over
@@ -96,11 +97,12 @@ int checkboard(void)
 {
 	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
 	volatile ccsr_local_mcm_t *mcm = &immap->im_local_mcm;
+	u8 *pixis_base = (u8 *)PIXIS_BASE;
 
 	printf ("Board: MPC8610HPCD, System ID: 0x%02x, "
 		"System Version: 0x%02x, FPGA Version: 0x%02x\n",
-		in8(PIXIS_BASE + PIXIS_ID), in8(PIXIS_BASE + PIXIS_VER),
-		in8(PIXIS_BASE + PIXIS_PVER));
+		in_8(pixis_base + PIXIS_ID), in_8(pixis_base + PIXIS_VER),
+		in_8(pixis_base + PIXIS_PVER));
 
 	mcm->abcr |= 0x00010000; /* 0 */
 	mcm->hpmr3 = 0x80000008; /* 4c */
@@ -438,10 +440,9 @@ get_board_sys_clk(ulong dummy)
 {
 	u8 i;
 	ulong val = 0;
-	ulong a;
+	u8 *pixis_base = (u8 *)PIXIS_BASE;
 
-	a = PIXIS_BASE + PIXIS_SPD;
-	i = in8(a);
+	i = in_8(pixis_base + PIXIS_SPD);
 	i &= 0x07;
 
 	switch (i) {
@@ -481,7 +482,9 @@ int board_eth_init(bd_t *bis)
 
 void board_reset(void)
 {
-	out8(PIXIS_BASE + PIXIS_RST, 0);
+	u8 *pixis_base = (u8 *)PIXIS_BASE;
+
+	out_8(pixis_base + PIXIS_RST, 0);
 
 	while (1)
 		;
diff --git a/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c b/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c
index 63eba0c59..4186a2ecd 100644
--- a/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c
+++ b/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c
@@ -69,9 +69,10 @@ void mpc8610hpcd_diu_init(void)
 	unsigned int pixel_format;
 	unsigned char tmp_val;
 	unsigned char pixis_arch;
+	u8 *pixis_base = (u8 *)PIXIS_BASE;
 
-	tmp_val = in8(PIXIS_BASE + PIXIS_BRDCFG0);
-	pixis_arch = in8(PIXIS_BASE + PIXIS_VER);
+	tmp_val = in_8(pixis_base + PIXIS_BRDCFG0);
+	pixis_arch = in_8(pixis_base + PIXIS_VER);
 
 	monitor_port = getenv("monitor");
 	if (!strncmp(monitor_port, "0", 1)) {	/* 0 - DVI */
@@ -82,28 +83,28 @@ void mpc8610hpcd_diu_init(void)
 		else
 			pixel_format = 0x88883316;
 		gamma_fix = 0;
-		out8(PIXIS_BASE + PIXIS_BRDCFG0, tmp_val | 0x08);
+		out_8(pixis_base + PIXIS_BRDCFG0, tmp_val | 0x08);
 
 	} else if (!strncmp(monitor_port, "1", 1)) { /* 1 - Single link LVDS */
 		xres = 1024;
 		yres = 768;
 		pixel_format = 0x88883316;
 		gamma_fix = 0;
-		out8(PIXIS_BASE + PIXIS_BRDCFG0, (tmp_val & 0xf7) | 0x10);
+		out_8(pixis_base + PIXIS_BRDCFG0, (tmp_val & 0xf7) | 0x10);
 
 	} else if (!strncmp(monitor_port, "2", 1)) { /* 2 - Double link LVDS */
 		xres = 1280;
 		yres = 1024;
 		pixel_format = 0x88883316;
 		gamma_fix = 1;
-		out8(PIXIS_BASE + PIXIS_BRDCFG0, tmp_val & 0xe7);
+		out_8(pixis_base + PIXIS_BRDCFG0, tmp_val & 0xe7);
 
 	} else {	/* DVI */
 		xres = 1280;
 		yres = 1024;
 		pixel_format = 0x88882317;
 		gamma_fix = 0;
-		out8(PIXIS_BASE + PIXIS_BRDCFG0, tmp_val | 0x08);
+		out_8(pixis_base + PIXIS_BRDCFG0, tmp_val | 0x08);
 	}
 
 	fsl_diu_init(xres, pixel_format, gamma_fix,