diff options
| -rw-r--r-- | board/keymile/common/common.c | 23 | ||||
| -rw-r--r-- | board/keymile/common/common.h | 20 | ||||
| -rw-r--r-- | board/keymile/kmeter1/Makefile | 6 | ||||
| -rw-r--r-- | board/keymile/kmeter1/kmeter1.c | 7 | ||||
| -rw-r--r-- | board/keymile/mgcoge/mgcoge.c | 10 | ||||
| -rw-r--r-- | board/keymile/mgsuvd/mgsuvd.c | 8 | ||||
| -rw-r--r-- | include/configs/kmeter1.h | 9 | ||||
| -rw-r--r-- | include/configs/mgcoge.h | 10 | ||||
| -rw-r--r-- | include/configs/mgsuvd.h | 9 |
9 files changed, 92 insertions, 10 deletions
diff --git a/board/keymile/common/common.c b/board/keymile/common/common.c index a4cf24cf7..133895081 100644 --- a/board/keymile/common/common.c +++ b/board/keymile/common/common.c @@ -22,10 +22,14 @@ */ #include <common.h> +#if defined(CONFIG_MGCOGE) #include <mpc8260.h> +#endif #include <ioports.h> #include <malloc.h> #include <hush.h> +#include <net.h> +#include <asm/io.h> #if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) #include <libfdt.h> @@ -33,8 +37,6 @@ #if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) #include <i2c.h> -#endif -#include <asm/io.h> extern int i2c_soft_read_pin (void); @@ -495,6 +497,7 @@ void i2c_init_board(void) #endif } #endif +#endif #if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) int fdt_set_node_and_value (void *blob, @@ -521,3 +524,19 @@ int fdt_set_node_and_value (void *blob, return ret; } #endif + +int ethernet_present (void) +{ + return (in_8((u8 *)CONFIG_SYS_PIGGY_BASE + CONFIG_SYS_SLOT_ID_OFF) & 0x80); +} + +int board_eth_init (bd_t *bis) +{ +#ifdef CONFIG_KEYMILE_HDLC_ENET + (void)keymile_hdlc_enet_initialize (bis); +#endif + if (ethernet_present ()) { + return -1; + } + return 0; +} diff --git a/board/keymile/common/common.h b/board/keymile/common/common.h new file mode 100644 index 000000000..d3d681424 --- /dev/null +++ b/board/keymile/common/common.h @@ -0,0 +1,20 @@ +/* + * (C) Copyright 2008 + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +#ifndef __KEYMILE_COMMON_H +#define __KEYMILE_COMMON_H + +int ethernet_present (void); +int ivm_read_eeprom (void); + +#ifdef CONFIG_KEYMILE_HDLC_ENET +int keymile_hdlc_enet_initialize (bd_t *bis); +#endif +#endif /* __KEYMILE_COMMON_H */ diff --git a/board/keymile/kmeter1/Makefile b/board/keymile/kmeter1/Makefile index 88b79f3f0..12a1518ff 100644 --- a/board/keymile/kmeter1/Makefile +++ b/board/keymile/kmeter1/Makefile @@ -22,12 +22,14 @@ # include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../common) +endif LIB = $(obj)lib$(BOARD).a -COBJS-y += $(BOARD).o +COBJS += $(BOARD).o ../common/common.o -COBJS := $(COBJS-y) SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) SOBJS := $(addprefix $(obj),$(SOBJS)) diff --git a/board/keymile/kmeter1/kmeter1.c b/board/keymile/kmeter1/kmeter1.c index f9a59a644..f04a57a9c 100644 --- a/board/keymile/kmeter1/kmeter1.c +++ b/board/keymile/kmeter1/kmeter1.c @@ -27,6 +27,8 @@ #include <pci.h> #include <libfdt.h> +#include "../common/common.h" + const qe_iop_conf_t qe_iop_conf_tab[] = { /* port pin dir open_drain assign */ @@ -141,7 +143,10 @@ phys_size_t initdram (int board_type) int checkboard (void) { - puts ("Board: Keymile kmeter1\n"); + puts ("Board: Keymile kmeter1"); + if (ethernet_present ()) + puts (" with PIGGY."); + puts ("\n"); return 0; } diff --git a/board/keymile/mgcoge/mgcoge.c b/board/keymile/mgcoge/mgcoge.c index 3683417f5..5c5073964 100644 --- a/board/keymile/mgcoge/mgcoge.c +++ b/board/keymile/mgcoge/mgcoge.c @@ -25,6 +25,7 @@ #include <mpc8260.h> #include <ioports.h> #include <malloc.h> +#include <net.h> #include <asm/io.h> #if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) @@ -35,7 +36,8 @@ #include <i2c.h> #endif -extern int ivm_read_eeprom (void); +#include "../common/common.h" + /* * I/O Port configuration table * @@ -285,8 +287,10 @@ phys_size_t initdram (int board_type) int checkboard(void) { - puts ("Board: mgcoge\n"); - + puts ("Board: Keymile mgcoge"); + if (ethernet_present ()) + puts (" with PIGGY."); + puts ("\n"); return 0; } diff --git a/board/keymile/mgsuvd/mgsuvd.c b/board/keymile/mgsuvd/mgsuvd.c index 3726acf4a..02baf622e 100644 --- a/board/keymile/mgsuvd/mgsuvd.c +++ b/board/keymile/mgsuvd/mgsuvd.c @@ -22,13 +22,14 @@ */ #include <common.h> #include <mpc8xx.h> +#include <net.h> #include <asm/io.h> #if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) #include <libfdt.h> #endif -extern int ivm_read_eeprom (void); +#include "../common/common.h" DECLARE_GLOBAL_DATA_PTR; @@ -60,7 +61,10 @@ const uint sdram_table[] = int checkboard (void) { - puts ("Board: Keymile mgsuvd\n"); + puts ("Board: Keymile mgsuvd"); + if (ethernet_present ()) + puts (" with PIGGY."); + puts ("\n"); return (0); } diff --git a/include/configs/kmeter1.h b/include/configs/kmeter1.h index e105c3bd2..7a63a4189 100644 --- a/include/configs/kmeter1.h +++ b/include/configs/kmeter1.h @@ -314,6 +314,15 @@ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ /* + * How to get access to the slot ID. Put this here to make it easy + * to modify in a centralized location. This is used in the HDLC + * driver to set the MAC. +*/ +#define CONFIG_SYS_SLOT_ID_BASE CONFIG_SYS_PIGGY_BASE +#define CONFIG_SYS_SLOT_ID_OFF (0x07) /* register offset */ +#define CONFIG_SYS_SLOT_ID_MASK (0x3f) /* mask for slot ID bits */ + +/* * BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE diff --git a/include/configs/mgcoge.h b/include/configs/mgcoge.h index dc9b311d4..31428ea09 100644 --- a/include/configs/mgcoge.h +++ b/include/configs/mgcoge.h @@ -400,4 +400,14 @@ #define OF_TBCLK (bd->bi_busfreq / 4) #define OF_STDOUT_PATH "/soc/cpm/serial@11a90" +/* + * How to get access to the slot ID. Put this here to make it easy + * to modify in a centralized location. This is used in the HDLC + * driver to set the MAC. +*/ +#define CONFIG_SYS_SLOT_ID_BASE CONFIG_SYS_PIGGY_BASE +#define CONFIG_SYS_SLOT_ID_OFF (0x07) /* register offset */ +#define CONFIG_SYS_SLOT_ID_MASK (0x3f) /* mask for slot ID bits */ + + #endif /* __CONFIG_H */ diff --git a/include/configs/mgsuvd.h b/include/configs/mgsuvd.h index fca2e5513..b862130ae 100644 --- a/include/configs/mgsuvd.h +++ b/include/configs/mgsuvd.h @@ -211,6 +211,15 @@ #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET+CONFIG_ENV_SECT_SIZE) #define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) +/* + * How to get access to the slot ID. Put this here to make it easy + * to modify in a centralized location. This is used in the HDLC + * driver to set the MAC. +*/ +#define CONFIG_SYS_SLOT_ID_BASE CONFIG_SYS_PIGGY_BASE +#define CONFIG_SYS_SLOT_ID_OFF (0x07) /* register offset */ +#define CONFIG_SYS_SLOT_ID_MASK (0x3f) /* mask for slot ID bits */ + /*----------------------------------------------------------------------- * Cache Configuration */ |