diff options
186 files changed, 2723 insertions, 3627 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index e9db27842..f42c8f004 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -141,10 +141,10 @@ Jon Diekema <jon.diekema@smiths-aerospace.com> Dirk Eibach <eibach@gdsys.de> - compactcenter PPC460EX devconcenter PPC460EX dlvision PPC405EP gdppc440etx PPC440EP/GR + intip PPC460EX neo PPC405EP Dave Ellis <DGE@sixnetio.com> @@ -806,10 +806,6 @@ Scott McNutt <smcnutt@psyent.com> # Board CPU # ######################################################################### -Yasushi Shoji <yashi@atmark-techno.com> - - SUZAKU MicroBlaze - Michal Simek <monstr@monstr.eu> microblaze-generic MicroBlaze @@ -185,7 +185,6 @@ LIST_4xx=" \ canyonlands \ canyonlands_nand \ CMS700 \ - compactcenter \ CPCI2DP \ CPCI405 \ CPCI4052 \ @@ -214,6 +213,7 @@ LIST_4xx=" \ hcu5 \ HH405 \ HUB405 \ + intip \ JSE \ KAREF \ katmai \ @@ -775,7 +775,6 @@ LIST_nios2=" \ LIST_microblaze=" \ microblaze-generic \ - suzaku \ " ######################################################################### @@ -1308,14 +1308,6 @@ CATcenter_33_config: unconfig CMS700_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx cms700 esd -# Compact-Center & DevCon-Center use different U-Boot images -compactcenter_config \ -devconcenter_config: unconfig - @mkdir -p $(obj)include - @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \ - tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h - @$(MKCONFIG) -n $@ -a compactcenter ppc ppc4xx compactcenter gdsys - CPCI2DP_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci2dp esd @@ -1400,6 +1392,14 @@ HH405_config: unconfig HUB405_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx hub405 esd +# Compact-Center(codename intip) & DevCon-Center use different U-Boot images +intip_config \ +devconcenter_config: unconfig + @mkdir -p $(obj)include + @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \ + tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h + @$(MKCONFIG) -n $@ -a intip ppc ppc4xx intip gdsys + JSE_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx jse @@ -3541,11 +3541,6 @@ microblaze-generic_config: unconfig @mkdir -p $(obj)include @$(MKCONFIG) -a $(@:_config=) microblaze microblaze microblaze-generic xilinx -suzaku_config: unconfig - @mkdir -p $(obj)include - @echo "#define CONFIG_SUZAKU 1" > $(obj)include/config.h - @$(MKCONFIG) -a $(@:_config=) microblaze microblaze suzaku AtmarkTechno - #======================================================================== # Blackfin #======================================================================== diff --git a/board/AtmarkTechno/suzaku/Makefile b/board/AtmarkTechno/suzaku/Makefile deleted file mode 100644 index 109cec264..000000000 --- a/board/AtmarkTechno/suzaku/Makefile +++ /dev/null @@ -1,44 +0,0 @@ -# -# (C) Copyright 2003-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).a - -COBJS = $(BOARD).o flash.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(obj).depend $(OBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/AtmarkTechno/suzaku/config.mk b/board/AtmarkTechno/suzaku/config.mk deleted file mode 100644 index 7bbf2b130..000000000 --- a/board/AtmarkTechno/suzaku/config.mk +++ /dev/null @@ -1,29 +0,0 @@ -# -# (C) Copyright 2004 Atmark Techno, Inc. -# -# Yasushi SHOJI <yashi@atmark-techno.com> -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -TEXT_BASE = 0x80F00000 - -PLATFORM_CPPFLAGS += -mno-xl-soft-mul -PLATFORM_CPPFLAGS += -mno-xl-soft-div -PLATFORM_CPPFLAGS += -mxl-barrel-shift diff --git a/board/AtmarkTechno/suzaku/flash.c b/board/AtmarkTechno/suzaku/flash.c deleted file mode 100644 index ce6fae01b..000000000 --- a/board/AtmarkTechno/suzaku/flash.c +++ /dev/null @@ -1,46 +0,0 @@ -/* - * (C) Copyright 2004 Atmark Techno, Inc. - * - * Yasushi SHOJI <yashi@atmark-techno.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; - -unsigned long flash_init(void) -{ - return 0; -} - -void flash_print_info(flash_info_t *info) -{ -} - -int flash_erase(flash_info_t *info, int s_first, int s_last) -{ - return 0; -} - -int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt) -{ - return 0; -} diff --git a/board/AtmarkTechno/suzaku/suzaku.c b/board/AtmarkTechno/suzaku/suzaku.c deleted file mode 100644 index 267c476f0..000000000 --- a/board/AtmarkTechno/suzaku/suzaku.c +++ /dev/null @@ -1,32 +0,0 @@ -/* - * (C) Copyright 2004 Atmark Techno, Inc. - * - * Yasushi SHOJI <yashi@atmark-techno.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* This is a board specific file. It's OK to include board specific - * header files */ -#include <config.h> - -void do_reset(void) -{ - *((unsigned long *)(MICROBLAZE_SYSREG_BASE_ADDR)) = MICROBLAZE_SYSREG_RECONFIGURE; -} diff --git a/board/AtmarkTechno/suzaku/u-boot.lds b/board/AtmarkTechno/suzaku/u-boot.lds deleted file mode 100644 index 5a0868015..000000000 --- a/board/AtmarkTechno/suzaku/u-boot.lds +++ /dev/null @@ -1,68 +0,0 @@ -/* - * (C) Copyright 2004 Atmark Techno, Inc. - * - * Yasushi SHOJI <yashi@atmark-techno.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(microblaze) -ENTRY(_start) - -SECTIONS -{ - .text ALIGN(0x4): - { - __text_start = .; - cpu/microblaze/start.o (.text) - *(.text) - __text_end = .; - } - - .rodata ALIGN(0x4): - { - __rodata_start = .; - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - __rodata_end = .; - } - - .data ALIGN(0x4): - { - __data_start = .; - *(.data) - __data_end = .; - } - - .u_boot_cmd ALIGN(0x4): - { - . = .; - __u_boot_cmd_start = .; - *(.u_boot_cmd) - __u_boot_cmd_end = .; - } - - .bss ALIGN(0x4): - { - __bss_start = .; - *(.bss) - . = ALIGN(4); - __bss_end = .; - } - __end = . ; -} diff --git a/board/amcc/acadia/acadia.c b/board/amcc/acadia/acadia.c index 8d79be2ce..0db619952 100644 --- a/board/amcc/acadia/acadia.c +++ b/board/amcc/acadia/acadia.c @@ -57,7 +57,7 @@ int board_early_init_f(void) #if !defined(CONFIG_NAND_U_BOOT) /* don't reinit PLL when booting via I2C bootstrap option */ - mfsdr(SDR_PINSTP, reg); + mfsdr(SDR0_PINSTP, reg); if (reg != 0xf0000000) board_pll_init_f(); #endif @@ -65,18 +65,18 @@ int board_early_init_f(void) acadia_gpio_init(); /* Configure 405EZ for NAND usage */ - mtsdr(sdrnand0, SDR_NAND0_NDEN | SDR_NAND0_NDAREN | SDR_NAND0_NDRBEN); - mfsdr(sdrultra0, reg); + mtsdr(SDR0_NAND0, SDR_NAND0_NDEN | SDR_NAND0_NDAREN | SDR_NAND0_NDRBEN); + mfsdr(SDR0_ULTRA0, reg); reg &= ~SDR_ULTRA0_CSN_MASK; reg |= (SDR_ULTRA0_CSNSEL0 >> CONFIG_SYS_NAND_CS) | SDR_ULTRA0_NDGPIOBP | SDR_ULTRA0_EBCRDYEN | SDR_ULTRA0_NFSRSTEN; - mtsdr(sdrultra0, reg); + mtsdr(SDR0_ULTRA0, reg); /* USB Host core needs this bit set */ - mfsdr(sdrultra1, reg); - mtsdr(sdrultra1, reg | SDR_ULTRA1_LEDNENABLE); + mfsdr(SDR0_ULTRA1, reg); + mtsdr(SDR0_ULTRA1, reg | SDR_ULTRA1_LEDNENABLE); mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ mtdcr(uicer, 0x00000000); /* disable all ints */ diff --git a/board/amcc/acadia/memory.c b/board/amcc/acadia/memory.c index 3e5c80ea4..8c2addcb9 100644 --- a/board/amcc/acadia/memory.c +++ b/board/amcc/acadia/memory.c @@ -65,7 +65,7 @@ phys_size_t initdram(int board_type) u32 reg; /* don't reinit PLL when booting via I2C bootstrap option */ - mfsdr(SDR_PINSTP, reg); + mfsdr(SDR0_PINSTP, reg); if (reg != 0xf0000000) board_pll_init_f(); #endif @@ -81,25 +81,25 @@ phys_size_t initdram(int board_type) gpio_config(CONFIG_SYS_GPIO_CRAM_WAIT, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG); /* 2. EBC in Async mode */ - mtebc(pb1ap, 0x078F1EC0); - mtebc(pb2ap, 0x078F1EC0); - mtebc(pb1cr, 0x000BC000); - mtebc(pb2cr, 0x020BC000); + mtebc(PB1AP, 0x078F1EC0); + mtebc(PB2AP, 0x078F1EC0); + mtebc(PB1CR, 0x000BC000); + mtebc(PB2CR, 0x020BC000); /* 3. Set CRAM in Sync mode */ cram_bcr_write(0x7012); /* CRAM burst setting */ /* 4. EBC in Sync mode */ - mtebc(pb1ap, 0x9C0201C0); - mtebc(pb2ap, 0x9C0201C0); + mtebc(PB1AP, 0x9C0201C0); + mtebc(PB2AP, 0x9C0201C0); /* Set GPIO pins back to alternate function */ gpio_config(CONFIG_SYS_GPIO_CRAM_CLK, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG); gpio_config(CONFIG_SYS_GPIO_CRAM_ADV, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG); /* Config EBC to use RDY */ - mfsdr(sdrultra0, val); - mtsdr(sdrultra0, val | SDR_ULTRA0_EBCRDYEN); + mfsdr(SDR0_ULTRA0, val); + mtsdr(SDR0_ULTRA0, val | SDR_ULTRA0_EBCRDYEN); /* Wait a short while, since for NAND booting this is too fast */ for (i=0; i<200000; i++) diff --git a/board/amcc/acadia/pll.c b/board/amcc/acadia/pll.c index 9dcce35c8..b63813c7b 100644 --- a/board/amcc/acadia/pll.c +++ b/board/amcc/acadia/pll.c @@ -51,11 +51,11 @@ void board_pll_init_f(void) */ /* Initialize PLL */ - mtcpr(cprpllc, 0x0000033c); - mtcpr(cprplld, 0x0c010200); - mtcpr(cprprimad, 0x04060c0c); - mtcpr(cprperd0, 0x000c0000); /* SPI clk div. eq. OPB clk div. */ - mtcpr(cprclkupd, 0x40000000); + mtcpr(CPR0_PLLC, 0x0000033c); + mtcpr(CPR0_PLLD, 0x0c010200); + mtcpr(CPC0_PRIMAD, 0x04060c0c); + mtcpr(CPC0_PERD0, 0x000c0000); /* SPI clk div. eq. OPB clk div. */ + mtcpr(CPR0_CLKUP, 0x40000000); } #elif defined(PLLMR0_266_160_80) @@ -83,13 +83,13 @@ void board_pll_init_f(void) */ /* Initialize PLL */ - mtcpr(cprpllc, 0x20000238); - mtcpr(cprplld, 0x03010400); - mtcpr(cprprimad, 0x03050a0a); - mtcpr(cprperc0, 0x00000000); - mtcpr(cprperd0, 0x070a0707); /* SPI clk div. eq. OPB clk div. */ - mtcpr(cprperd1, 0x07323200); - mtcpr(cprclkupd, 0x40000000); + mtcpr(CPR0_PLLC, 0x20000238); + mtcpr(CPR0_PLLD, 0x03010400); + mtcpr(CPC0_PRIMAD, 0x03050a0a); + mtcpr(CPC0_PERC0, 0x00000000); + mtcpr(CPC0_PERD0, 0x070a0707); /* SPI clk div. eq. OPB clk div. */ + mtcpr(CPC0_PERD1, 0x07323200); + mtcpr(CPR0_CLKUP, 0x40000000); } #elif defined(PLLMR0_333_166_83) @@ -117,12 +117,12 @@ void board_pll_init_f(void) */ /* Initialize PLL */ - mtcpr(cprpllc, 0x0000033C); - mtcpr(cprplld, 0x0a010000); - mtcpr(cprprimad, 0x02040808); - mtcpr(cprperd0, 0x02080505); /* SPI clk div. eq. OPB clk div. */ - mtcpr(cprperd1, 0xA6A60300); - mtcpr(cprclkupd, 0x40000000); + mtcpr(CPR0_PLLC, 0x0000033C); + mtcpr(CPR0_PLLD, 0x0a010000); + mtcpr(CPC0_PRIMAD, 0x02040808); + mtcpr(CPC0_PERD0, 0x02080505); /* SPI clk div. eq. OPB clk div. */ + mtcpr(CPC0_PERD1, 0xA6A60300); + mtcpr(CPR0_CLKUP, 0x40000000); } #elif defined(PLLMR0_100_100_12) @@ -143,12 +143,12 @@ void board_pll_init_f(void) */ /* Initialize PLL */ - mtcpr(cprpllc, 0x000003BC); - mtcpr(cprplld, 0x06060600); - mtcpr(cprprimad, 0x02020004); - mtcpr(cprperd0, 0x04002828); /* SPI clk div. eq. OPB clk div. */ - mtcpr(cprperd1, 0xC8C81600); - mtcpr(cprclkupd, 0x40000000); + mtcpr(CPR0_PLLC, 0x000003BC); + mtcpr(CPR0_PLLD, 0x06060600); + mtcpr(CPC0_PRIMAD, 0x02020004); + mtcpr(CPC0_PERD0, 0x04002828); /* SPI clk div. eq. OPB clk div. */ + mtcpr(CPC0_PERD1, 0xC8C81600); + mtcpr(CPR0_CLKUP, 0x40000000); } #endif /* CPU_<speed>_405EZ */ @@ -167,12 +167,12 @@ unsigned long get_tbclk(void) /* * Read PLL Mode registers */ - mfcpr(cprplld, cpr_plld); + mfcpr(CPR0_PLLD, cpr_plld); /* * Read CPR_PRIMAD register */ - mfcpr(cprprimad, cpr_primad); + mfcpr(CPC0_PRIMAD, cpr_primad); /* * Determine CPU clock frequency diff --git a/board/amcc/bamboo/bamboo.c b/board/amcc/bamboo/bamboo.c index febc61a08..2ffd720d5 100644 --- a/board/amcc/bamboo/bamboo.c +++ b/board/amcc/bamboo/bamboo.c @@ -487,35 +487,35 @@ int pci_pre_init(struct pci_controller *hose) | Set priority for all PLB3 devices to 0. | Set PLB3 arbiter to fair mode. +-------------------------------------------------------------------------*/ - mfsdr(sdr_amp1, addr); - mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00); - addr = mfdcr(plb3_acr); - mtdcr(plb3_acr, addr | 0x80000000); + mfsdr(SD0_AMP1, addr); + mtsdr(SD0_AMP1, (addr & 0x000000FF) | 0x0000FF00); + addr = mfdcr(PLB3_ACR); + mtdcr(PLB3_ACR, addr | 0x80000000); /*-------------------------------------------------------------------------+ | Set priority for all PLB4 devices to 0. +-------------------------------------------------------------------------*/ - mfsdr(sdr_amp0, addr); - mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00); - addr = mfdcr(plb4_acr) | 0xa0000000; /* Was 0x8---- */ - mtdcr(plb4_acr, addr); + mfsdr(SD0_AMP0, addr); + mtsdr(SD0_AMP0, (addr & 0x000000FF) | 0x0000FF00); + addr = mfdcr(PLB4_ACR) | 0xa0000000; /* Was 0x8---- */ + mtdcr(PLB4_ACR, addr); /*-------------------------------------------------------------------------+ | Set Nebula PLB4 arbiter to fair mode. +-------------------------------------------------------------------------*/ /* Segment0 */ - addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair; - addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled; - addr = (addr & ~plb0_acr_rdp_mask) | plb0_acr_rdp_4deep; - addr = (addr & ~plb0_acr_wrp_mask) | plb0_acr_wrp_2deep; - mtdcr(plb0_acr, addr); + addr = (mfdcr(PLB0_ACR) & ~PLB0_ACR_PPM_MASK) | PLB0_ACR_PPM_FAIR; + addr = (addr & ~PLB0_ACR_HBU_MASK) | PLB0_ACR_HBU_ENABLED; + addr = (addr & ~PLB0_ACR_RDP_MASK) | PLB0_ACR_RDP_4DEEP; + addr = (addr & ~PLB0_ACR_WRP_MASK) | PLB0_ACR_WRP_2DEEP; + mtdcr(PLB0_ACR, addr); /* Segment1 */ - addr = (mfdcr(plb1_acr) & ~plb1_acr_ppm_mask) | plb1_acr_ppm_fair; - addr = (addr & ~plb1_acr_hbu_mask) | plb1_acr_hbu_enabled; - addr = (addr & ~plb1_acr_rdp_mask) | plb1_acr_rdp_4deep; - addr = (addr & ~plb1_acr_wrp_mask) | plb1_acr_wrp_2deep; - mtdcr(plb1_acr, addr); + addr = (mfdcr(PLB1_ACR) & ~PLB1_ACR_PPM_MASK) | PLB1_ACR_PPM_FAIR; + addr = (addr & ~PLB1_ACR_HBU_MASK) | PLB1_ACR_HBU_ENABLED; + addr = (addr & ~PLB1_ACR_RDP_MASK) | PLB1_ACR_RDP_4DEEP; + addr = (addr & ~PLB1_ACR_WRP_MASK) | PLB1_ACR_WRP_2DEEP; + mtdcr(PLB1_ACR, addr); return 1; } @@ -695,8 +695,8 @@ void ext_bus_cntlr_init(void) | +-------------------------------------------------------------------------*/ /* NVRAM - FPGA */ - mtebc(pb5ap, EBC0_BNAP_NVRAM_FPGA); - mtebc(pb5cr, EBC0_BNCR_NVRAM_FPGA_CS5); + mtebc(PB5AP, EBC0_BNAP_NVRAM_FPGA); + mtebc(PB5CR, EBC0_BNCR_NVRAM_FPGA_CS5); /*-------------------------------------------------------------------------+ | @@ -749,7 +749,7 @@ void ext_bus_cntlr_init(void) case SDR0_PSTRP0_BOOTSTRAP_IIC_A4_EN: /* Boot Settings in IIC EEprom address 0xA8 or 0xA4 */ /* Read Serial Device Strap Register1 in PPC440EP */ - mfsdr(sdr_sdstp1, sdr0_sdstp1); + mfsdr(SDR0_SDSTP1, sdr0_sdstp1); boot_selection = sdr0_sdstp1 & SDR0_SDSTP1_BOOT_SEL_MASK; ebc_boot_size = sdr0_sdstp1 & SDR0_SDSTP1_EBC_ROM_BS_MASK; @@ -822,7 +822,7 @@ void ext_bus_cntlr_init(void) /* Default Strap Settings 5-7 */ /* Boot Settings in IIC EEprom address 0xA8 or 0xA4 */ /* Read Serial Device Strap Register1 in PPC440EP */ - mfsdr(sdr_sdstp1, sdr0_sdstp1); + mfsdr(SDR0_SDSTP1, sdr0_sdstp1); boot_selection = sdr0_sdstp1 & SDR0_SDSTP1_BOOT_SEL_MASK; ebc_boot_size = sdr0_sdstp1 & SDR0_SDSTP1_EBC_ROM_BS_MASK; @@ -1013,8 +1013,8 @@ void ext_bus_cntlr_init(void) /*-------------------------------------------------------------------------+ | Initialize EBC CONFIG +-------------------------------------------------------------------------*/ - mtdcr(ebccfga, xbcfg); - mtdcr(ebccfgd, EBC0_CFG_EBTC_DRIVEN | + mtdcr(EBC0_CFGADDR, EBC0_CFG); + mtdcr(EBC0_CFGDATA, EBC0_CFG_EBTC_DRIVEN | EBC0_CFG_PTD_ENABLED | EBC0_CFG_RTC_2048PERCLK | EBC0_CFG_EMPL_LOW | @@ -1029,20 +1029,20 @@ void ext_bus_cntlr_init(void) | Initialize EBC Bank 0-4 +-------------------------------------------------------------------------*/ /* EBC Bank0 */ - mtebc(pb0ap, ebc0_cs0_bnap_value); - mtebc(pb0cr, ebc0_cs0_bncr_value); + mtebc(PB0AP, ebc0_cs0_bnap_value); + mtebc(PB0CR, ebc0_cs0_bncr_value); /* EBC Bank1 */ - mtebc(pb1ap, ebc0_cs1_bnap_value); - mtebc(pb1cr, ebc0_cs1_bncr_value); + mtebc(PB1AP, ebc0_cs1_bnap_value); + mtebc(PB1CR, ebc0_cs1_bncr_value); /* EBC Bank2 */ - mtebc(pb2ap, ebc0_cs2_bnap_value); - mtebc(pb2cr, ebc0_cs2_bncr_value); + mtebc(PB2AP, ebc0_cs2_bnap_value); + mtebc(PB2CR, ebc0_cs2_bncr_value); /* EBC Bank3 */ - mtebc(pb3ap, ebc0_cs3_bnap_value); - mtebc(pb3cr, ebc0_cs3_bncr_value); + mtebc(PB3AP, ebc0_cs3_bnap_value); + mtebc(PB3CR, ebc0_cs3_bncr_value); /* EBC Bank4 */ - mtebc(pb4ap, ebc0_cs4_bnap_value); - mtebc(pb4cr, ebc0_cs4_bncr_value); + mtebc(PB4AP, ebc0_cs4_bnap_value); + mtebc(PB4CR, ebc0_cs4_bncr_value); return; } @@ -1939,10 +1939,10 @@ void configure_ppc440ep_pins(void) sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_UES_MASK) | SDR0_PFC1_UES_USB2D_SEL; sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_UPR_MASK) | SDR0_PFC1_UPR_DISABLE; - mfsdr(sdr_usb0, sdr0_usb0); + mfsdr(SDR0_USB0, sdr0_usb0); sdr0_usb0 = sdr0_usb0 &~SDR0_USB0_USB_DEVSEL_MASK; sdr0_usb0 = sdr0_usb0 | SDR0_USB0_USB20D_DEVSEL; - mtsdr(sdr_usb0, sdr0_usb0); + mtsdr(SDR0_USB0, sdr0_usb0); usb2_device_selection_in_fpga(); } @@ -1950,19 +1950,19 @@ void configure_ppc440ep_pins(void) /* USB1.1 Device Selection */ if (ppc440ep_core_selection[USB1_DEVICE] == CORE_SELECTED) { - mfsdr(sdr_usb0, sdr0_usb0); + mfsdr(SDR0_USB0, sdr0_usb0); sdr0_usb0 = sdr0_usb0 &~SDR0_USB0_USB_DEVSEL_MASK; sdr0_usb0 = sdr0_usb0 | SDR0_USB0_USB11D_DEVSEL; - mtsdr(sdr_usb0, sdr0_usb0); + mtsdr(SDR0_USB0, sdr0_usb0); } /* USB1.1 Host Selection */ if (ppc440ep_core_selection[USB1_HOST] == CORE_SELECTED) { - mfsdr(sdr_usb0, sdr0_usb0); + mfsdr(SDR0_USB0, sdr0_usb0); sdr0_usb0 = sdr0_usb0 &~SDR0_USB0_LEEN_MASK; sdr0_usb0 = sdr0_usb0 | SDR0_USB0_LEEN_ENABLE; - mtsdr(sdr_usb0, sdr0_usb0); + mtsdr(SDR0_USB0, sdr0_usb0); } /* NAND Flash Selection */ @@ -1971,14 +1971,14 @@ void configure_ppc440ep_pins(void) update_ndfc_ios(gpio_tab); #if !(defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)) - mtsdr(sdr_cust0, SDR0_CUST0_MUX_NDFC_SEL | + mtsdr(SDR0_CUST0, SDR0_CUST0_MUX_NDFC_SEL | SDR0_CUST0_NDFC_ENABLE | SDR0_CUST0_NDFC_BW_8_BIT | SDR0_CUST0_NDFC_ARE_MASK | SDR0_CUST0_CHIPSELGAT_EN1 | SDR0_CUST0_CHIPSELGAT_EN2); #else - mtsdr(sdr_cust0, SDR0_CUST0_MUX_NDFC_SEL | + mtsdr(SDR0_CUST0, SDR0_CUST0_MUX_NDFC_SEL | SDR0_CUST0_NDFC_ENABLE | SDR0_CUST0_NDFC_BW_8_BIT | SDR0_CUST0_NDFC_ARE_MASK | @@ -1991,16 +1991,16 @@ void configure_ppc440ep_pins(void) else { /* Set Mux on EMAC */ - mtsdr(sdr_cust0, SDR0_CUST0_MUX_EMAC_SEL); + mtsdr(SDR0_CUST0, SDR0_CUST0_MUX_EMAC_SEL); } /* MII Selection */ if (ppc440ep_core_selection[MII_SEL] == CORE_SELECTED) { update_zii_ios(gpio_tab); - mfsdr(sdr_mfr, sdr0_mfr); + mfsdr(SDR0_MFR, sdr0_mfr); sdr0_mfr = (sdr0_mfr & ~SDR0_MFR_ZMII_MODE_MASK) | SDR0_MFR_ZMII_MODE_MII; - mtsdr(sdr_mfr, sdr0_mfr); + mtsdr(SDR0_MFR, sdr0_mfr); set_phy_configuration_through_fpga(ZMII_CONFIGURATION_IS_MII); } @@ -2009,9 +2009,9 @@ void configure_ppc440ep_pins(void) if (ppc440ep_core_selection[RMII_SEL] == CORE_SELECTED) { update_zii_ios(gpio_tab); - mfsdr(sdr_mfr, sdr0_mfr); + mfsdr(SDR0_MFR, sdr0_mfr); sdr0_mfr = (sdr0_mfr & ~SDR0_MFR_ZMII_MODE_MASK) | SDR0_MFR_ZMII_MODE_RMII_10M; - mtsdr(sdr_mfr, sdr0_mfr); + mtsdr(SDR0_MFR, sdr0_mfr); set_phy_configuration_through_fpga(ZMII_CONFIGURATION_IS_RMII); } @@ -2020,9 +2020,9 @@ void configure_ppc440ep_pins(void) if (ppc440ep_core_selection[SMII_SEL] == CORE_SELECTED) { update_zii_ios(gpio_tab); - mfsdr(sdr_mfr, sdr0_mfr); + mfsdr(SDR0_MFR, sdr0_mfr); sdr0_mfr = (sdr0_mfr & ~SDR0_MFR_ZMII_MODE_MASK) | SDR0_MFR_ZMII_MODE_SMII; - mtsdr(sdr_mfr, sdr0_mfr); + mtsdr(SDR0_MFR, sdr0_mfr); set_phy_configuration_through_fpga(ZMII_CONFIGURATION_IS_SMII); } @@ -2071,13 +2071,13 @@ void configure_ppc440ep_pins(void) /* Packet Reject Function Enable */ if (ppc440ep_core_selection[PACKET_REJ_FUNC_EN] == CORE_SELECTED) { - mfsdr(sdr_mfr, sdr0_mfr); + mfsdr(SDR0_MFR, sdr0_mfr); sdr0_mfr = (sdr0_mfr & ~SDR0_MFR_PKT_REJ_MASK) | SDR0_MFR_PKT_REJ_EN;; - mtsdr(sdr_mfr, sdr0_mfr); + mtsdr(SDR0_MFR, sdr0_mfr); } /* Perform effective access to hardware */ - mtsdr(sdr_pfc1, sdr0_pfc1); + mtsdr(SDR0_PFC1, sdr0_pfc1); set_chip_gpio_configuration(GPIO0, gpio_tab); set_chip_gpio_configuration(GPIO1, gpio_tab); diff --git a/board/amcc/bamboo/flash.c b/board/amcc/bamboo/flash.c index 001348ac5..7bf877de8 100644 --- a/board/amcc/bamboo/flash.c +++ b/board/amcc/bamboo/flash.c @@ -94,7 +94,7 @@ unsigned long flash_init(void) * Boot Settings in IIC EEprom address 0xA8 or 0xA4 * Read Serial Device Strap Register1 in PPC440EP */ - mfsdr(sdr_sdstp1, val); + mfsdr(SDR0_SDSTP1, val); boot_selection = val & SDR0_SDSTP1_BOOT_SEL_MASK; ebc_boot_size = val & SDR0_SDSTP1_EBC_ROM_BS_MASK; diff --git a/board/amcc/bubinga/bubinga.c b/board/amcc/bubinga/bubinga.c index 74a2a1c21..d0aebec2c 100644 --- a/board/amcc/bubinga/bubinga.c +++ b/board/amcc/bubinga/bubinga.c @@ -41,9 +41,9 @@ int board_early_init_f(void) * and enable the internal PCI arbiter if selected */ if (in_8((void *)FPGA_REG1) & FPGA_REG1_PCI_INT_ARB) - mtdcr(cpc0_pci, CPC0_PCI_HOST_CFG_EN | CPC0_PCI_ARBIT_EN); + mtdcr(CPC0_PCI, CPC0_PCI_HOST_CFG_EN | CPC0_PCI_ARBIT_EN); else - mtdcr(cpc0_pci, CPC0_PCI_HOST_CFG_EN); + mtdcr(CPC0_PCI, CPC0_PCI_HOST_CFG_EN); return 0; } diff --git a/board/amcc/bubinga/flash.c b/board/amcc/bubinga/flash.c index a10babbf7..baf89d548 100644 --- a/board/amcc/bubinga/flash.c +++ b/board/amcc/bubinga/flash.c @@ -106,25 +106,25 @@ unsigned long flash_init(void) /* Re-do sizing to get full correct info */ if (size_b1) { - mtdcr(ebccfga, pb0cr); - pbcr = mfdcr(ebccfgd); - mtdcr(ebccfga, pb0cr); + mtdcr(EBC0_CFGADDR, PB0CR); + pbcr = mfdcr(EBC0_CFGDATA); + mtdcr(EBC0_CFGADDR, PB0CR); base_b1 = -size_b1; pbcr = (pbcr & 0x0001ffff) | base_b1 | (((size_b1 / 1024 / 1024) - 1) << 17); - mtdcr(ebccfgd, pbcr); - /* printf("pb1cr = %x\n", pbcr); */ + mtdcr(EBC0_CFGDATA, pbcr); + /* printf("PB1CR = %x\n", pbcr); */ } if (size_b0) { - mtdcr(ebccfga, pb1cr); - pbcr = mfdcr(ebccfgd); - mtdcr(ebccfga, pb1cr); + mtdcr(EBC0_CFGADDR, PB1CR); + pbcr = mfdcr(EBC0_CFGDATA); + mtdcr(EBC0_CFGADDR, PB1CR); base_b0 = base_b1 - size_b0; pbcr = (pbcr & 0x0001ffff) | base_b0 | (((size_b0 / 1024 / 1024) - 1) << 17); - mtdcr(ebccfgd, pbcr); - /* printf("pb0cr = %x\n", pbcr); */ + mtdcr(EBC0_CFGDATA, pbcr); + /* printf("PB0CR = %x\n", pbcr); */ } size_b0 = flash_get_size((vu_long *) base_b0, &flash_info[0]); diff --git a/board/amcc/canyonlands/canyonlands.c b/board/amcc/canyonlands/canyonlands.c index 710a0af82..3a03f3073 100644 --- a/board/amcc/canyonlands/canyonlands.c +++ b/board/amcc/canyonlands/canyonlands.c @@ -475,9 +475,9 @@ int board_early_init_r (void) /* Remap the NOR FLASH to 0xcc00.0000 ... 0xcfff.ffff */ #if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) - mtebc(pb3cr, CONFIG_SYS_FLASH_BASE_PHYS_L | 0xda000); + mtebc(PB3CR, CONFIG_SYS_FLASH_BASE_PHYS_L | 0xda000); #else - mtebc(pb0cr, CONFIG_SYS_FLASH_BASE_PHYS_L | 0xda000); + mtebc(PB0CR, CONFIG_SYS_FLASH_BASE_PHYS_L | 0xda000); #endif /* Remove TLB entry of boot EBC mapping */ diff --git a/board/amcc/ebony/ebony.c b/board/amcc/ebony/ebony.c index ad09e6207..2439b03a9 100644 --- a/board/amcc/ebony/ebony.c +++ b/board/amcc/ebony/ebony.c @@ -41,30 +41,30 @@ int board_early_init_f(void) /*-------------------------------------------------------------------- * Setup the external bus controller/chip selects *-------------------------------------------------------------------*/ - mtdcr(ebccfga, xbcfg); - reg = mfdcr(ebccfgd); - mtdcr(ebccfgd, reg | 0x04000000); /* Set ATC */ + mtdcr(EBC0_CFGADDR, EBC0_CFG); + reg = mfdcr(EBC0_CFGDATA); + mtdcr(EBC0_CFGDATA, reg | 0x04000000); /* Set ATC */ - mtebc(pb1ap, 0x02815480); /* NVRAM/RTC */ - mtebc(pb1cr, 0x48018000); /* BA=0x480 1MB R/W 8-bit */ - mtebc(pb7ap, 0x01015280); /* FPGA registers */ - mtebc(pb7cr, 0x48318000); /* BA=0x483 1MB R/W 8-bit */ + mtebc(PB1AP, 0x02815480); /* NVRAM/RTC */ + mtebc(PB1CR, 0x48018000); /* BA=0x480 1MB R/W 8-bit */ + mtebc(PB7AP, 0x01015280); /* FPGA registers */ + mtebc(PB7CR, 0x48318000); /* BA=0x483 1MB R/W 8-bit */ /* read FPGA_REG0 and set the bus controller */ status = *fpga_base; if ((status & BOOT_SMALL_FLASH) && !(status & FLASH_ONBD_N)) { - mtebc(pb0ap, 0x9b015480); /* FLASH/SRAM */ - mtebc(pb0cr, 0xfff18000); /* BAS=0xfff 1MB R/W 8-bit */ - mtebc(pb2ap, 0x9b015480); /* 4MB FLASH */ - mtebc(pb2cr, 0xff858000); /* BAS=0xff8 4MB R/W 8-bit */ + mtebc(PB0AP, 0x9b015480); /* FLASH/SRAM */ + mtebc(PB0CR, 0xfff18000); /* BAS=0xfff 1MB R/W 8-bit */ + mtebc(PB2AP, 0x9b015480); /* 4MB FLASH */ + mtebc(PB2CR, 0xff858000); /* BAS=0xff8 4MB R/W 8-bit */ } else { - mtebc(pb0ap, 0x9b015480); /* 4MB FLASH */ - mtebc(pb0cr, 0xffc58000); /* BAS=0xffc 4MB R/W 8-bit */ + mtebc(PB0AP, 0x9b015480); /* 4MB FLASH */ + mtebc(PB0CR, 0xffc58000); /* BAS=0xffc 4MB R/W 8-bit */ /* set CS2 if FLASH_ONBD_N == 0 */ if (!(status & FLASH_ONBD_N)) { - mtebc(pb2ap, 0x9b015480); /* FLASH/SRAM */ - mtebc(pb2cr, 0xff818000); /* BAS=0xff8 4MB R/W 8-bit */ + mtebc(PB2AP, 0x9b015480); /* FLASH/SRAM */ + mtebc(PB2CR, 0xff818000); /* BAS=0xff8 4MB R/W 8-bit */ } } @@ -186,7 +186,7 @@ int pci_pre_init(struct pci_controller *hose) * The ebony board is always configured as the host & requires the * PCI arbiter to be enabled. *--------------------------------------------------------------------------*/ - strap = mfdcr(cpc0_strp1); + strap = mfdcr(CPC0_STRP1); if ((strap & 0x00100000) == 0) { printf("PCI: CPC0_STRP1[PAE] not set.\n"); return 0; diff --git a/board/amcc/katmai/katmai.c b/board/amcc/katmai/katmai.c index e078ba4f9..1a45056da 100644 --- a/board/amcc/katmai/katmai.c +++ b/board/amcc/katmai/katmai.c @@ -220,9 +220,9 @@ int board_early_init_f (void) mtdcr (uic0sr, 0x00000000); /* clear all interrupts*/ mtdcr (uic0sr, 0xffffffff); /* clear all interrupts*/ - mfsdr(sdr_mfr, mfr); + mfsdr(SDR0_MFR, mfr); mfr |= SDR0_MFR_FIXD; /* Workaround for PCI/DMA */ - mtsdr(sdr_mfr, mfr); + mtsdr(SDR0_MFR, mfr); mtsdr(SDR0_PFC0, CONFIG_SYS_PFC0); @@ -280,7 +280,7 @@ int pci_pre_init(struct pci_controller * hose ) * The katmai board is always configured as the host & requires the * PCI arbiter to be enabled. *-------------------------------------------------------------------*/ - mfsdr(sdr_sdstp1, strap); + mfsdr(SDR0_SDSTP1, strap); if( (strap & SDR0_SDSTP1_PAE_MASK) == 0 ) { printf("PCI: SDR0_STRP1[%08lX] - PCI Arbiter disabled.\n",strap); return 0; diff --git a/board/amcc/luan/luan.c b/board/amcc/luan/luan.c index 7d02d904e..71ad89fa6 100644 --- a/board/amcc/luan/luan.c +++ b/board/amcc/luan/luan.c @@ -42,12 +42,12 @@ int board_early_init_f(void) { u32 mfr; - mtebc( pb0ap, 0x03800000 ); /* set chip selects */ - mtebc( pb0cr, 0xffc58000 ); /* ebc0_b0cr, 4MB at 0xffc00000 CS0 */ - mtebc( pb1ap, 0x03800000 ); - mtebc( pb1cr, 0xff018000 ); /* ebc0_b1cr, 1MB at 0xff000000 CS1 */ - mtebc( pb2ap, 0x03800000 ); - mtebc( pb2cr, 0xff838000 ); /* ebc0_b2cr, 2MB at 0xff800000 CS2 */ + mtebc( PB0AP, 0x03800000 ); /* set chip selects */ + mtebc( PB0CR, 0xffc58000 ); /* ebc0_b0cr, 4MB at 0xffc00000 CS0 */ + mtebc( PB1AP, 0x03800000 ); + mtebc( PB1CR, 0xff018000 ); /* ebc0_b1cr, 1MB at 0xff000000 CS1 */ + mtebc( PB2AP, 0x03800000 ); + mtebc( PB2CR, 0xff838000 ); /* ebc0_b2cr, 2MB at 0xff800000 CS2 */ mtdcr( uic1sr, 0xffffffff ); /* Clear all interrupts */ mtdcr( uic1er, 0x00000000 ); /* disable all interrupts */ @@ -67,9 +67,9 @@ int board_early_init_f(void) mtdcr( uic0sr, 0x00000000 ); /* clear all interrupts */ mtdcr( uic0sr, 0xffffffff ); - mfsdr(sdr_mfr, mfr); + mfsdr(SDR0_MFR, mfr); mfr |= SDR0_MFR_FIXD; /* Workaround for PCI/DMA */ - mtsdr(sdr_mfr, mfr); + mtsdr(SDR0_MFR, mfr); return 0; } @@ -147,7 +147,7 @@ int pci_pre_init( struct pci_controller *hose ) * The luan board is always configured as the host & requires the * PCI arbiter to be enabled. *--------------------------------------------------------------------------*/ - mfsdr(sdr_sdstp1, strap); + mfsdr(SDR0_SDSTP1, strap); if( (strap & SDR0_SDSTP1_PAE_MASK) == 0 ) { printf("PCI: SDR0_STRP1[%08lX] - PCI Arbiter disabled.\n",strap); diff --git a/board/amcc/ocotea/ocotea.c b/board/amcc/ocotea/ocotea.c index fe4540849..5e32e8a78 100644 --- a/board/amcc/ocotea/ocotea.c +++ b/board/amcc/ocotea/ocotea.c @@ -54,7 +54,7 @@ int board_early_init_f (void) /*-------------------------------------------------------------------------+ | Initialize EBC CONFIG +-------------------------------------------------------------------------*/ - mtebc(xbcfg, EBC_CFG_LE_UNLOCK | + mtebc(EBC0_CFG, EBC_CFG_LE_UNLOCK | EBC_CFG_PTD_ENABLE | EBC_CFG_RTC_64PERCLK | EBC_CFG_ATC_PREVIOUS | EBC_CFG_DTC_PREVIOUS | EBC_CFG_CTC_PREVIOUS | EBC_CFG_EMC_NONDEFAULT | @@ -63,14 +63,14 @@ int board_early_init_f (void) /*-------------------------------------------------------------------------+ | FPGA. Initialize bank 7 with default values. +-------------------------------------------------------------------------*/ - mtebc(pb7ap, EBC_BXAP_BME_DISABLED|EBC_BXAP_TWT_ENCODE(7)| + mtebc(PB7AP, EBC_BXAP_BME_DISABLED|EBC_BXAP_TWT_ENCODE(7)| EBC_BXAP_BCE_DISABLE| EBC_BXAP_CSN_ENCODE(1)|EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1)|EBC_BXAP_WBF_ENCODE(1)| EBC_BXAP_TH_ENCODE(1)|EBC_BXAP_RE_DISABLED| EBC_BXAP_BEM_WRITEONLY| EBC_BXAP_PEN_DISABLED); - mtebc(pb7cr, EBC_BXCR_BAS_ENCODE(0x48300000)| + mtebc(PB7CR, EBC_BXCR_BAS_ENCODE(0x48300000)| EBC_BXCR_BS_1MB|EBC_BXCR_BU_RW|EBC_BXCR_BW_8BIT); /* read FPGA base register FPGA_REG0 */ @@ -95,53 +95,53 @@ int board_early_init_f (void) /*-------------------------------------------------------------------------+ | 1 MB FLASH / 1 MB SRAM. Initialize bank 0 with default values. +-------------------------------------------------------------------------*/ - mtebc(pb0ap, EBC_BXAP_BME_DISABLED|EBC_BXAP_TWT_ENCODE(cs0_twt)| + mtebc(PB0AP, EBC_BXAP_BME_DISABLED|EBC_BXAP_TWT_ENCODE(cs0_twt)| EBC_BXAP_BCE_DISABLE| EBC_BXAP_CSN_ENCODE(1)|EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1)|EBC_BXAP_WBF_ENCODE(1)| EBC_BXAP_TH_ENCODE(1)|EBC_BXAP_RE_DISABLED| EBC_BXAP_BEM_WRITEONLY| EBC_BXAP_PEN_DISABLED); - mtebc(pb0cr, EBC_BXCR_BAS_ENCODE(cs0_base)| + mtebc(PB0CR, EBC_BXCR_BAS_ENCODE(cs0_base)| cs0_size|EBC_BXCR_BU_RW|EBC_BXCR_BW_8BIT); /*-------------------------------------------------------------------------+ | 8KB NVRAM/RTC. Initialize bank 1 with default values. +-------------------------------------------------------------------------*/ - mtebc(pb1ap, EBC_BXAP_BME_DISABLED|EBC_BXAP_TWT_ENCODE(10)| + mtebc(PB1AP, EBC_BXAP_BME_DISABLED|EBC_BXAP_TWT_ENCODE(10)| EBC_BXAP_BCE_DISABLE| EBC_BXAP_CSN_ENCODE(1)|EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1)|EBC_BXAP_WBF_ENCODE(1)| EBC_BXAP_TH_ENCODE(1)|EBC_BXAP_RE_DISABLED| EBC_BXAP_BEM_WRITEONLY| EBC_BXAP_PEN_DISABLED); - mtebc(pb1cr, EBC_BXCR_BAS_ENCODE(0x48000000)| + mtebc(PB1CR, EBC_BXCR_BAS_ENCODE(0x48000000)| EBC_BXCR_BS_1MB|EBC_BXCR_BU_RW|EBC_BXCR_BW_8BIT); /*-------------------------------------------------------------------------+ | 4 MB FLASH. Initialize bank 2 with default values. +-------------------------------------------------------------------------*/ - mtebc(pb2ap, EBC_BXAP_BME_DISABLED|EBC_BXAP_TWT_ENCODE(cs2_twt)| + mtebc(PB2AP, EBC_BXAP_BME_DISABLED|EBC_BXAP_TWT_ENCODE(cs2_twt)| EBC_BXAP_BCE_DISABLE| EBC_BXAP_CSN_ENCODE(1)|EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1)|EBC_BXAP_WBF_ENCODE(1)| EBC_BXAP_TH_ENCODE(1)|EBC_BXAP_RE_DISABLED| EBC_BXAP_BEM_WRITEONLY| EBC_BXAP_PEN_DISABLED); - mtebc(pb2cr, EBC_BXCR_BAS_ENCODE(cs2_base)| + mtebc(PB2CR, EBC_BXCR_BAS_ENCODE(cs2_base)| cs2_size|EBC_BXCR_BU_RW|EBC_BXCR_BW_8BIT); /*-------------------------------------------------------------------------+ | FPGA. Initialize bank 7 with default values. +-------------------------------------------------------------------------*/ - mtebc(pb7ap, EBC_BXAP_BME_DISABLED|EBC_BXAP_TWT_ENCODE(7)| + mtebc(PB7AP, EBC_BXAP_BME_DISABLED|EBC_BXAP_TWT_ENCODE(7)| EBC_BXAP_BCE_DISABLE| EBC_BXAP_CSN_ENCODE(1)|EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1)|EBC_BXAP_WBF_ENCODE(1)| EBC_BXAP_TH_ENCODE(1)|EBC_BXAP_RE_DISABLED| EBC_BXAP_BEM_WRITEONLY| EBC_BXAP_PEN_DISABLED); - mtebc(pb7cr, EBC_BXCR_BAS_ENCODE(0x48300000)| + mtebc(PB7CR, EBC_BXCR_BAS_ENCODE(0x48300000)| EBC_BXCR_BS_1MB|EBC_BXCR_BU_RW|EBC_BXCR_BW_8BIT); /*-------------------------------------------------------------------- @@ -189,9 +189,9 @@ int board_early_init_f (void) mtdcr (uic0pr, 0xfc000000); /* */ mtdcr (uic0tr, 0x00000000); /* */ mtdcr (uic0vr, 0x00000001); /* */ - mfsdr (sdr_mfr, mfr); + mfsdr (SDR0_MFR, mfr); mfr &= ~SDR0_MFR_ECS_MASK; -/* mtsdr(sdr_mfr, mfr); */ +/* mtsdr(SDR0_MFR, mfr); */ fpga_init(); return 0; @@ -297,7 +297,7 @@ int pci_pre_init(struct pci_controller * hose ) * The ocotea board is always configured as the host & requires the * PCI arbiter to be enabled. *--------------------------------------------------------------------------*/ - mfsdr(sdr_sdstp1, strap); + mfsdr(SDR0_SDSTP1, strap); if( (strap & SDR0_SDSTP1_PAE_MASK) == 0 ){ printf("PCI: SDR0_STRP1[%08lX] - PCI Arbiter disabled.\n",strap); return 0; @@ -379,8 +379,8 @@ void fpga_init(void) unsigned long sdr0_cust0; unsigned long pvr; - mfsdr (sdr_pfc0, sdr0_pfc0); - mfsdr (sdr_pfc1, sdr0_pfc1); + mfsdr (SDR0_PFC0, sdr0_pfc0); + mfsdr (SDR0_PFC1, sdr0_pfc1); group = SDR0_PFC1_EPS_DECODE(sdr0_pfc1); pvr = get_pvr (); @@ -390,8 +390,8 @@ void fpga_init(void) sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_CTEMS_MASK) | SDR0_PFC1_CTEMS_EMS; out8(FPGA_REG2, (in8(FPGA_REG2) & ~FPGA_REG2_EXT_INTFACE_MASK) | FPGA_REG2_EXT_INTFACE_ENABLE); - mtsdr (sdr_pfc0, sdr0_pfc0); - mtsdr (sdr_pfc1, sdr0_pfc1); + mtsdr (SDR0_PFC0, sdr0_pfc0); + mtsdr (SDR0_PFC1, sdr0_pfc1); } else { sdr0_pfc0 = (sdr0_pfc0 & ~SDR0_PFC0_TRE_MASK) | SDR0_PFC0_TRE_ENABLE; switch (group) @@ -403,8 +403,8 @@ void fpga_init(void) out8(FPGA_REG2, (in8(FPGA_REG2) & ~FPGA_REG2_EXT_INTFACE_MASK) | FPGA_REG2_EXT_INTFACE_ENABLE); sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_CTEMS_MASK) | SDR0_PFC1_CTEMS_EMS; - mtsdr (sdr_pfc0, sdr0_pfc0); - mtsdr (sdr_pfc1, sdr0_pfc1); + mtsdr (SDR0_PFC0, sdr0_pfc0); + mtsdr (SDR0_PFC1, sdr0_pfc1); break; case 3: case 4: @@ -412,8 +412,8 @@ void fpga_init(void) case 6: /* CPU trace B - Over EBMI */ sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_CTEMS_MASK) | SDR0_PFC1_CTEMS_CPUTRACE; - mtsdr (sdr_pfc0, sdr0_pfc0); - mtsdr (sdr_pfc1, sdr0_pfc1); + mtsdr (SDR0_PFC0, sdr0_pfc0); + mtsdr (SDR0_PFC1, sdr0_pfc1); out8(FPGA_REG2, (in8(FPGA_REG2) & ~FPGA_REG2_EXT_INTFACE_MASK) | FPGA_REG2_EXT_INTFACE_DISABLE); break; @@ -421,8 +421,8 @@ void fpga_init(void) } /* Initialize the ethernet specific functions in the fpga */ - mfsdr(sdr_pfc1, sdr0_pfc1); - mfsdr(sdr_cust0, sdr0_cust0); + mfsdr(SDR0_PFC1, sdr0_pfc1); + mfsdr(SDR0_CUST0, sdr0_cust0); if ( (SDR0_PFC1_EPS_DECODE(sdr0_pfc1) == 4) && ((SDR0_CUST0_RGMII2_DECODE(sdr0_cust0) == RGMII_FER_GMII) || (SDR0_CUST0_RGMII2_DECODE(sdr0_cust0) == RGMII_FER_TBI))) diff --git a/board/amcc/redwood/redwood.c b/board/amcc/redwood/redwood.c index 37a0c310f..49078ebee 100644 --- a/board/amcc/redwood/redwood.c +++ b/board/amcc/redwood/redwood.c @@ -220,7 +220,7 @@ static void early_init_EBC(void) * default value : * 0x07C00000 - 0 0 000 1 1 1 1 1 0000 0 00000 000000000000 */ - mtebc(xbcfg, EBC_CFG_LE_UNLOCK | + mtebc(EBC0_CFG, EBC_CFG_LE_UNLOCK | EBC_CFG_PTD_ENABLE | EBC_CFG_RTC_16PERCLK | EBC_CFG_ATC_PREVIOUS | @@ -237,8 +237,8 @@ static void early_init_EBC(void) * since some board registers values may be needed to determine the * boot type */ - mtebc(pb1ap, EBC_BXAP_FPGA); - mtebc(pb1cr, EBC_BXCR_FPGA_CS3); + mtebc(PB1AP, EBC_BXAP_FPGA); + mtebc(PB1CR, EBC_BXCR_FPGA_CS3); } @@ -399,12 +399,12 @@ static void early_reinit_EBC(int computed_boot_device) break; } - mtebc(pb0ap, ebc0_cs0_bxap_value); - mtebc(pb0cr, ebc0_cs0_bxcr_value); - mtebc(pb1ap, ebc0_cs1_bxap_value); - mtebc(pb1cr, ebc0_cs1_bxcr_value); - mtebc(pb2ap, ebc0_cs2_bxap_value); - mtebc(pb2cr, ebc0_cs2_bxcr_value); + mtebc(PB0AP, ebc0_cs0_bxap_value); + mtebc(PB0CR, ebc0_cs0_bxcr_value); + mtebc(PB1AP, ebc0_cs1_bxap_value); + mtebc(PB1CR, ebc0_cs1_bxcr_value); + mtebc(PB2AP, ebc0_cs2_bxap_value); + mtebc(PB2CR, ebc0_cs2_bxcr_value); } static void early_init_UIC(void) diff --git a/board/amcc/sequoia/sequoia.c b/board/amcc/sequoia/sequoia.c index 246ad9484..5913455ba 100644 --- a/board/amcc/sequoia/sequoia.c +++ b/board/amcc/sequoia/sequoia.c @@ -46,8 +46,8 @@ int board_early_init_f(void) u32 sdr0_pfc1, sdr0_pfc2; u32 reg; - mtdcr(ebccfga, xbcfg); - mtdcr(ebccfgd, 0xb8400000); + mtdcr(EBC0_CFGADDR, EBC0_CFG); + mtdcr(EBC0_CFGDATA, 0xb8400000); /* * Setup the interrupt controller polarities, triggers, etc. @@ -107,8 +107,8 @@ int board_early_init_f(void) mtsdr(SDR0_PFC1, sdr0_pfc1); /* PCI arbiter enabled */ - mfsdr(sdr_pci0, reg); - mtsdr(sdr_pci0, 0x80000000 | reg); + mfsdr(SDR0_PCI0, reg); + mtsdr(SDR0_PCI0, 0x80000000 | reg); /* setup NAND FLASH */ mfsdr(SDR0_CUST0, sdr0_cust0); @@ -144,19 +144,19 @@ int misc_init_r(void) gd->bd->bi_flashoffset = 0; #if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) - mtdcr(ebccfga, pb3cr); + mtdcr(EBC0_CFGADDR, PB3CR); #else - mtdcr(ebccfga, pb0cr); + mtdcr(EBC0_CFGADDR, PB0CR); #endif - pbcr = mfdcr(ebccfgd); + pbcr = mfdcr(EBC0_CFGDATA); size_val = ffs(gd->bd->bi_flashsize) - 21; pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17); #if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) - mtdcr(ebccfga, pb3cr); + mtdcr(EBC0_CFGADDR, PB3CR); #else - mtdcr(ebccfga, pb0cr); + mtdcr(EBC0_CFGADDR, PB0CR); #endif - mtdcr(ebccfgd, pbcr); + mtdcr(EBC0_CFGDATA, pbcr); /* * Re-check to get correct base address @@ -309,8 +309,8 @@ int misc_init_r(void) * This fix will make the MAL burst disabling patch for the Linux * EMAC driver obsolete. */ - reg = mfdcr(plb4_acr) & ~PLB4_ACR_WRP; - mtdcr(plb4_acr, reg); + reg = mfdcr(PLB4_ACR) & ~PLB4_ACR_WRP; + mtdcr(PLB4_ACR, reg); return 0; } @@ -370,35 +370,35 @@ int pci_pre_init(struct pci_controller *hose) * Set priority for all PLB3 devices to 0. * Set PLB3 arbiter to fair mode. */ - mfsdr(sdr_amp1, addr); - mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00); - addr = mfdcr(plb3_acr); - mtdcr(plb3_acr, addr | 0x80000000); + mfsdr(SD0_AMP1, addr); + mtsdr(SD0_AMP1, (addr & 0x000000FF) | 0x0000FF00); + addr = mfdcr(PLB3_ACR); + mtdcr(PLB3_ACR, addr | 0x80000000); /* * Set priority for all PLB4 devices to 0. */ - mfsdr(sdr_amp0, addr); - mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00); - addr = mfdcr(plb4_acr) | 0xa0000000; /* Was 0x8---- */ - mtdcr(plb4_acr, addr); + mfsdr(SD0_AMP0, addr); + mtsdr(SD0_AMP0, (addr & 0x000000FF) | 0x0000FF00); + addr = mfdcr(PLB4_ACR) | 0xa0000000; /* Was 0x8---- */ + mtdcr(PLB4_ACR, addr); /* * Set Nebula PLB4 arbiter to fair mode. */ /* Segment0 */ - addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair; - addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled; - addr = (addr & ~plb0_acr_rdp_mask) | plb0_acr_rdp_4deep; - addr = (addr & ~plb0_acr_wrp_mask) | plb0_acr_wrp_2deep; - mtdcr(plb0_acr, addr); + addr = (mfdcr(PLB0_ACR) & ~PLB0_ACR_PPM_MASK) | PLB0_ACR_PPM_FAIR; + addr = (addr & ~PLB0_ACR_HBU_MASK) | PLB0_ACR_HBU_ENABLED; + addr = (addr & ~PLB0_ACR_RDP_MASK) | PLB0_ACR_RDP_4DEEP; + addr = (addr & ~PLB0_ACR_WRP_MASK) | PLB0_ACR_WRP_2DEEP; + mtdcr(PLB0_ACR, addr); /* Segment1 */ - addr = (mfdcr(plb1_acr) & ~plb1_acr_ppm_mask) | plb1_acr_ppm_fair; - addr = (addr & ~plb1_acr_hbu_mask) | plb1_acr_hbu_enabled; - addr = (addr & ~plb1_acr_rdp_mask) | plb1_acr_rdp_4deep; - addr = (addr & ~plb1_acr_wrp_mask) | plb1_acr_wrp_2deep; - mtdcr(plb1_acr, addr); + addr = (mfdcr(PLB1_ACR) & ~PLB1_ACR_PPM_MASK) | PLB1_ACR_PPM_FAIR; + addr = (addr & ~PLB1_ACR_HBU_MASK) | PLB1_ACR_HBU_ENABLED; + addr = (addr & ~PLB1_ACR_RDP_MASK) | PLB1_ACR_RDP_4DEEP; + addr = (addr & ~PLB1_ACR_WRP_MASK) | PLB1_ACR_WRP_2DEEP; + mtdcr(PLB1_ACR, addr); #ifdef CONFIG_PCI_PNP hose->fixup_irq = sequoia_pci_fixup_irq; diff --git a/board/amcc/taihu/taihu.c b/board/amcc/taihu/taihu.c index d8806ac32..4e5796ee8 100644 --- a/board/amcc/taihu/taihu.c +++ b/board/amcc/taihu/taihu.c @@ -48,14 +48,14 @@ int board_early_init_f(void) mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */ - mtebc(pb3ap, CONFIG_SYS_EBC_PB3AP); /* memory bank 3 (CPLD_LCM) initialization */ - mtebc(pb3cr, CONFIG_SYS_EBC_PB3CR); + mtebc(PB3AP, CONFIG_SYS_EBC_PB3AP); /* memory bank 3 (CPLD_LCM) initialization */ + mtebc(PB3CR, CONFIG_SYS_EBC_PB3CR); /* * Configure CPC0_PCI to enable PerWE as output * and enable the internal PCI arbiter */ - mtdcr(cpc0_pci, CPC0_PCI_SPE | CPC0_PCI_HOST_CFG_EN | CPC0_PCI_ARBIT_EN); + mtdcr(CPC0_PCI, CPC0_PCI_SPE | CPC0_PCI_HOST_CFG_EN | CPC0_PCI_ARBIT_EN); return 0; } diff --git a/board/amcc/taishan/showinfo.c b/board/amcc/taishan/showinfo.c index 2a78a22e6..e4e441b31 100644 --- a/board/amcc/taishan/showinfo.c +++ b/board/amcc/taishan/showinfo.c @@ -33,60 +33,60 @@ void show_reset_reg(void) /* read clock regsiter */ printf("===== Display reset and initialize register Start =========\n"); - mfcpr(clk_pllc,reg); + mfcpr(CPR0_PLLC,reg); printf("cpr_pllc = %#010lx\n",reg); - mfcpr(clk_plld,reg); + mfcpr(CPR0_PLLD,reg); printf("cpr_plld = %#010lx\n",reg); - mfcpr(clk_primad,reg); + mfcpr(CPR0_PRIMAD,reg); printf("cpr_primad = %#010lx\n",reg); - mfcpr(clk_primbd,reg); + mfcpr(CPR0_PRIMBD,reg); printf("cpr_primbd = %#010lx\n",reg); - mfcpr(clk_opbd,reg); + mfcpr(CPR0_OPBD,reg); printf("cpr_opbd = %#010lx\n",reg); - mfcpr(clk_perd,reg); + mfcpr(CPR0_PERD,reg); printf("cpr_perd = %#010lx\n",reg); - mfcpr(clk_mald,reg); + mfcpr(CPR0_MALD,reg); printf("cpr_mald = %#010lx\n",reg); /* read sdr register */ - mfsdr(sdr_ebc,reg); - printf("sdr_ebc = %#010lx\n",reg); + mfsdr(SDR0_EBC,reg); + printf("SDR0_EBC = %#010lx\n",reg); - mfsdr(sdr_cp440,reg); - printf("sdr_cp440 = %#010lx\n",reg); + mfsdr(SDR0_CP440,reg); + printf("SDR0_CP440 = %#010lx\n",reg); - mfsdr(sdr_xcr,reg); - printf("sdr_xcr = %#010lx\n",reg); + mfsdr(SDR0_XCR,reg); + printf("SDR0_XCR = %#010lx\n",reg); - mfsdr(sdr_xpllc,reg); - printf("sdr_xpllc = %#010lx\n",reg); + mfsdr(SDR0_XPLLC,reg); + printf("SDR0_XPLLC = %#010lx\n",reg); - mfsdr(sdr_xplld,reg); - printf("sdr_xplld = %#010lx\n",reg); + mfsdr(SDR0_XPLLD,reg); + printf("SDR0_XPLLD = %#010lx\n",reg); - mfsdr(sdr_pfc0,reg); - printf("sdr_pfc0 = %#010lx\n",reg); + mfsdr(SDR0_PFC0,reg); + printf("SDR0_PFC0 = %#010lx\n",reg); - mfsdr(sdr_pfc1,reg); - printf("sdr_pfc1 = %#010lx\n",reg); + mfsdr(SDR0_PFC1,reg); + printf("SDR0_PFC1 = %#010lx\n",reg); - mfsdr(sdr_cust0,reg); - printf("sdr_cust0 = %#010lx\n",reg); + mfsdr(SDR0_CUST0,reg); + printf("SDR0_CUST0 = %#010lx\n",reg); - mfsdr(sdr_cust1,reg); - printf("sdr_cust1 = %#010lx\n",reg); + mfsdr(SDR0_CUST1,reg); + printf("SDR0_CUST1 = %#010lx\n",reg); - mfsdr(sdr_uart0,reg); - printf("sdr_uart0 = %#010lx\n",reg); + mfsdr(SDR0_UART0,reg); + printf("SDR0_UART0 = %#010lx\n",reg); - mfsdr(sdr_uart1,reg); - printf("sdr_uart1 = %#010lx\n",reg); + mfsdr(SDR0_UART1,reg); + printf("SDR0_UART1 = %#010lx\n",reg); printf("===== Display reset and initialize register End =========\n"); } @@ -96,14 +96,14 @@ void show_xbridge_info(void) unsigned long reg; printf("PCI-X chip control registers\n"); - mfsdr(sdr_xcr, reg); - printf("sdr_xcr = %#010lx\n", reg); + mfsdr(SDR0_XCR, reg); + printf("SDR0_XCR = %#010lx\n", reg); - mfsdr(sdr_xpllc, reg); - printf("sdr_xpllc = %#010lx\n", reg); + mfsdr(SDR0_XPLLC, reg); + printf("SDR0_XPLLC = %#010lx\n", reg); - mfsdr(sdr_xplld, reg); - printf("sdr_xplld = %#010lx\n", reg); + mfsdr(SDR0_XPLLD, reg); + printf("SDR0_XPLLD = %#010lx\n", reg); printf("PCI-X Bridge Configure registers\n"); printf("PCIX0_VENDID = %#06x\n", in16r(PCIX0_VENDID)); diff --git a/board/amcc/taishan/taishan.c b/board/amcc/taishan/taishan.c index 53ce88c6c..086778a65 100644 --- a/board/amcc/taishan/taishan.c +++ b/board/amcc/taishan/taishan.c @@ -47,7 +47,7 @@ int board_early_init_f (void) /*-------------------------------------------------------------------------+ | Initialize EBC CONFIG +-------------------------------------------------------------------------*/ - mtebc(xbcfg, EBC_CFG_LE_UNLOCK | + mtebc(EBC0_CFG, EBC_CFG_LE_UNLOCK | EBC_CFG_PTD_ENABLE | EBC_CFG_RTC_64PERCLK | EBC_CFG_ATC_PREVIOUS | EBC_CFG_DTC_PREVIOUS | EBC_CFG_CTC_PREVIOUS | EBC_CFG_EMC_DEFAULT | @@ -56,66 +56,66 @@ int board_early_init_f (void) /*-------------------------------------------------------------------------+ | 64MB FLASH. Initialize bank 0 with default values. +-------------------------------------------------------------------------*/ - mtebc(pb0ap, EBC_BXAP_BME_DISABLED|EBC_BXAP_TWT_ENCODE(15) | + mtebc(PB0AP, EBC_BXAP_BME_DISABLED|EBC_BXAP_TWT_ENCODE(15) | EBC_BXAP_BCE_DISABLE | EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_OEN_ENCODE(1) | EBC_BXAP_WBN_ENCODE(1) | EBC_BXAP_WBF_ENCODE(1) | EBC_BXAP_TH_ENCODE(3) | EBC_BXAP_RE_DISABLED | EBC_BXAP_BEM_WRITEONLY | EBC_BXAP_PEN_DISABLED); - mtebc(pb0cr, EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FLASH_BASE) | + mtebc(PB0CR, EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FLASH_BASE) | EBC_BXCR_BS_64MB | EBC_BXCR_BU_RW|EBC_BXCR_BW_32BIT); /*-------------------------------------------------------------------------+ | FPGA. Initialize bank 1 with default values. +-------------------------------------------------------------------------*/ - mtebc(pb1ap, EBC_BXAP_BME_DISABLED|EBC_BXAP_TWT_ENCODE(5) | + mtebc(PB1AP, EBC_BXAP_BME_DISABLED|EBC_BXAP_TWT_ENCODE(5) | EBC_BXAP_BCE_DISABLE | EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_OEN_ENCODE(1) | EBC_BXAP_WBN_ENCODE(1) | EBC_BXAP_WBF_ENCODE(1) | EBC_BXAP_TH_ENCODE(3) | EBC_BXAP_RE_DISABLED | EBC_BXAP_BEM_WRITEONLY | EBC_BXAP_PEN_DISABLED); - mtebc(pb1cr, EBC_BXCR_BAS_ENCODE(0x41000000) | + mtebc(PB1CR, EBC_BXCR_BAS_ENCODE(0x41000000) | EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_8BIT); /*-------------------------------------------------------------------------+ | LCM. Initialize bank 2 with default values. +-------------------------------------------------------------------------*/ - mtebc(pb2ap, EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(64) | + mtebc(PB2AP, EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(64) | EBC_BXAP_BCE_DISABLE | EBC_BXAP_CSN_ENCODE(3) | EBC_BXAP_OEN_ENCODE(3) | EBC_BXAP_WBN_ENCODE(3) | EBC_BXAP_WBF_ENCODE(3) | EBC_BXAP_TH_ENCODE(7) | EBC_BXAP_RE_DISABLED | EBC_BXAP_BEM_WRITEONLY | EBC_BXAP_PEN_DISABLED); - mtebc(pb2cr, EBC_BXCR_BAS_ENCODE(0x42000000) | + mtebc(PB2CR, EBC_BXCR_BAS_ENCODE(0x42000000) | EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW|EBC_BXCR_BW_8BIT); /*-------------------------------------------------------------------------+ | TMP. Initialize bank 3 with default values. +-------------------------------------------------------------------------*/ - mtebc(pb3ap, EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(128) | + mtebc(PB3AP, EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(128) | EBC_BXAP_BCE_DISABLE | EBC_BXAP_CSN_ENCODE(3) | EBC_BXAP_OEN_ENCODE(3) | EBC_BXAP_WBN_ENCODE(3) | EBC_BXAP_WBF_ENCODE(3) | EBC_BXAP_TH_ENCODE(7) | EBC_BXAP_RE_DISABLED | EBC_BXAP_BEM_WRITEONLY | EBC_BXAP_PEN_DISABLED); - mtebc(pb3cr, EBC_BXCR_BAS_ENCODE(0x48000000) | + mtebc(PB3CR, EBC_BXCR_BAS_ENCODE(0x48000000) | EBC_BXCR_BS_64MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT); /*-------------------------------------------------------------------------+ | Connector 4~7. Initialize bank 3~ 7 with default values. +-------------------------------------------------------------------------*/ - mtebc(pb4ap,0); - mtebc(pb4cr,0); - mtebc(pb5ap,0); - mtebc(pb5cr,0); - mtebc(pb6ap,0); - mtebc(pb6cr,0); - mtebc(pb7ap,0); - mtebc(pb7cr,0); + mtebc(PB4AP,0); + mtebc(PB4CR,0); + mtebc(PB5AP,0); + mtebc(PB5CR,0); + mtebc(PB6AP,0); + mtebc(PB6CR,0); + mtebc(PB7AP,0); + mtebc(PB7CR,0); /*-------------------------------------------------------------------- * Setup the interrupt controller polarities, triggers, etc. @@ -164,13 +164,13 @@ int board_early_init_f (void) mtdcr (uic0vr, 0x00000001); /* */ /* Enable two GPIO 10~11 and TraceA signal */ - mfsdr(sdr_pfc0,reg); + mfsdr(SDR0_PFC0,reg); reg |= 0x00300000; - mtsdr(sdr_pfc0,reg); + mtsdr(SDR0_PFC0,reg); - mfsdr(sdr_pfc1,reg); + mfsdr(SDR0_PFC1,reg); reg |= 0x00100000; - mtsdr(sdr_pfc1,reg); + mtsdr(SDR0_PFC1,reg); /* Set GPIO 10 and 11 as output */ GpioOdr = (volatile unsigned int*)(CONFIG_SYS_PERIPHERAL_BASE+0x718); @@ -230,7 +230,7 @@ int pci_pre_init(struct pci_controller * hose ) * The ocotea board is always configured as the host & requires the * PCI arbiter to be enabled. *--------------------------------------------------------------------------*/ - mfsdr(sdr_sdstp1, strap); + mfsdr(SDR0_SDSTP1, strap); if( (strap & SDR0_SDSTP1_PAE_MASK) == 0 ){ printf("PCI: SDR0_STRP1[%08lX] - PCI Arbiter disabled.\n",strap); return 0; diff --git a/board/amcc/walnut/flash.c b/board/amcc/walnut/flash.c index d363564d5..3dc6aabe1 100644 --- a/board/amcc/walnut/flash.c +++ b/board/amcc/walnut/flash.c @@ -102,27 +102,27 @@ unsigned long flash_init(void) /* Re-do sizing to get full correct info */ if (size_b1) { - mtdcr(ebccfga, pb0cr); - pbcr = mfdcr(ebccfgd); - mtdcr(ebccfga, pb0cr); + mtdcr(EBC0_CFGADDR, PB0CR); + pbcr = mfdcr(EBC0_CFGDATA); + mtdcr(EBC0_CFGADDR, PB0CR); base_b1 = -size_b1; pbcr = (pbcr & 0x0001ffff) | base_b1 | (((size_b1 / 1024 / 1024) - 1) << 17); - mtdcr(ebccfgd, pbcr); - /* printf("pb1cr = %x\n", pbcr); */ + mtdcr(EBC0_CFGDATA, pbcr); + /* printf("PB1CR = %x\n", pbcr); */ } if (size_b0) { - mtdcr(ebccfga, pb1cr); - pbcr = mfdcr(ebccfgd); - mtdcr(ebccfga, pb1cr); + mtdcr(EBC0_CFGADDR, PB1CR); + pbcr = mfdcr(EBC0_CFGDATA); + mtdcr(EBC0_CFGADDR, PB1CR); base_b0 = base_b1 - size_b0; pbcr = (pbcr & 0x0001ffff) | base_b0 | (((size_b0 / 1024 / 1024) - 1) << 17); - mtdcr(ebccfgd, pbcr); - /* printf("pb0cr = %x\n", pbcr); */ + mtdcr(EBC0_CFGDATA, pbcr); + /* printf("PB0CR = %x\n", pbcr); */ } size_b0 = flash_get_size((vu_long *) base_b0, &flash_info[0]); diff --git a/board/amcc/yosemite/yosemite.c b/board/amcc/yosemite/yosemite.c index 3982896cb..2a654fa89 100644 --- a/board/amcc/yosemite/yosemite.c +++ b/board/amcc/yosemite/yosemite.c @@ -40,9 +40,9 @@ int board_early_init_f(void) /*-------------------------------------------------------------------- * Setup the external bus controller/chip selects *-------------------------------------------------------------------*/ - mtdcr(ebccfga, xbcfg); - reg = mfdcr(ebccfgd); - mtdcr(ebccfgd, reg | 0x04000000); /* Set ATC */ + mtdcr(EBC0_CFGADDR, EBC0_CFG); + reg = mfdcr(EBC0_CFGDATA); + mtdcr(EBC0_CFGDATA, reg | 0x04000000); /* Set ATC */ /*-------------------------------------------------------------------- * Setup the GPIO pins @@ -101,10 +101,10 @@ int board_early_init_f(void) /*-------------------------------------------------------------------- * Setup other serial configuration *-------------------------------------------------------------------*/ - mfsdr(sdr_pci0, reg); - mtsdr(sdr_pci0, 0x80000000 | reg); /* PCI arbiter enabled */ - mtsdr(sdr_pfc0, 0x00003e00); /* Pin function */ - mtsdr(sdr_pfc1, 0x00048000); /* Pin function: UART0 has 4 pins */ + mfsdr(SDR0_PCI0, reg); + mtsdr(SDR0_PCI0, 0x80000000 | reg); /* PCI arbiter enabled */ + mtsdr(SDR0_PFC0, 0x00003e00); /* Pin function */ + mtsdr(SDR0_PFC1, 0x00048000); /* Pin function: UART0 has 4 pins */ /*clear tmrclk divisor */ *(unsigned char *)(CONFIG_SYS_BCSR_BASE | 0x04) = 0x00; @@ -129,8 +129,8 @@ int misc_init_r (void) int size_val = 0; /* Re-do sizing to get full correct info */ - mtdcr(ebccfga, pb0cr); - pbcr = mfdcr(ebccfgd); + mtdcr(EBC0_CFGADDR, PB0CR); + pbcr = mfdcr(EBC0_CFGDATA); switch (gd->bd->bi_flashsize) { case 1 << 20: size_val = 0; @@ -158,8 +158,8 @@ int misc_init_r (void) break; } pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17); - mtdcr(ebccfga, pb0cr); - mtdcr(ebccfgd, pbcr); + mtdcr(EBC0_CFGADDR, PB0CR); + mtdcr(EBC0_CFGDATA, pbcr); /* adjust flash start and offset */ gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize; @@ -353,35 +353,35 @@ int pci_pre_init(struct pci_controller *hose) | Set priority for all PLB3 devices to 0. | Set PLB3 arbiter to fair mode. +-------------------------------------------------------------------------*/ - mfsdr(sdr_amp1, addr); - mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00); - addr = mfdcr(plb3_acr); - mtdcr(plb3_acr, addr | 0x80000000); + mfsdr(SD0_AMP1, addr); + mtsdr(SD0_AMP1, (addr & 0x000000FF) | 0x0000FF00); + addr = mfdcr(PLB3_ACR); + mtdcr(PLB3_ACR, addr | 0x80000000); /*-------------------------------------------------------------------------+ | Set priority for all PLB4 devices to 0. +-------------------------------------------------------------------------*/ - mfsdr(sdr_amp0, addr); - mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00); - addr = mfdcr(plb4_acr) | 0xa0000000; /* Was 0x8---- */ - mtdcr(plb4_acr, addr); + mfsdr(SD0_AMP0, addr); + mtsdr(SD0_AMP0, (addr & 0x000000FF) | 0x0000FF00); + addr = mfdcr(PLB4_ACR) | 0xa0000000; /* Was 0x8---- */ + mtdcr(PLB4_ACR, addr); /*-------------------------------------------------------------------------+ | Set Nebula PLB4 arbiter to fair mode. +-------------------------------------------------------------------------*/ /* Segment0 */ - addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair; - addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled; - addr = (addr & ~plb0_acr_rdp_mask) | plb0_acr_rdp_4deep; - addr = (addr & ~plb0_acr_wrp_mask) | plb0_acr_wrp_2deep; - mtdcr(plb0_acr, addr); + addr = (mfdcr(PLB0_ACR) & ~PLB0_ACR_PPM_MASK) | PLB0_ACR_PPM_FAIR; + addr = (addr & ~PLB0_ACR_HBU_MASK) | PLB0_ACR_HBU_ENABLED; + addr = (addr & ~PLB0_ACR_RDP_MASK) | PLB0_ACR_RDP_4DEEP; + addr = (addr & ~PLB0_ACR_WRP_MASK) | PLB0_ACR_WRP_2DEEP; + mtdcr(PLB0_ACR, addr); /* Segment1 */ - addr = (mfdcr(plb1_acr) & ~plb1_acr_ppm_mask) | plb1_acr_ppm_fair; - addr = (addr & ~plb1_acr_hbu_mask) | plb1_acr_hbu_enabled; - addr = (addr & ~plb1_acr_rdp_mask) | plb1_acr_rdp_4deep; - addr = (addr & ~plb1_acr_wrp_mask) | plb1_acr_wrp_2deep; - mtdcr(plb1_acr, addr); + addr = (mfdcr(PLB1_ACR) & ~PLB1_ACR_PPM_MASK) | PLB1_ACR_PPM_FAIR; + addr = (addr & ~PLB1_ACR_HBU_MASK) | PLB1_ACR_HBU_ENABLED; + addr = (addr & ~PLB1_ACR_RDP_MASK) | PLB1_ACR_RDP_4DEEP; + addr = (addr & ~PLB1_ACR_WRP_MASK) | PLB1_ACR_WRP_2DEEP; + mtdcr(PLB1_ACR, addr); return 1; } diff --git a/board/amcc/yucca/flash.c b/board/amcc/yucca/flash.c index d8c3b32cc..5fab7bb1d 100644 --- a/board/amcc/yucca/flash.c +++ b/board/amcc/yucca/flash.c @@ -982,7 +982,7 @@ unsigned long flash_init(void) * Boot Settings in IIC EEprom address 0xA8 or 0xA0 * Read Serial Device Strap Register1 in PPC440SPe */ - mfsdr(sdr_sdstp1, val); + mfsdr(SDR0_SDSTP1, val); boot_selection = val & SDR0_SDSTP1_BOOT_SEL_MASK; ebc_boot_size = val & SDR0_SDSTP1_EBC_ROM_BS_MASK; diff --git a/board/amcc/yucca/yucca.c b/board/amcc/yucca/yucca.c index 06c7d625a..245004cee 100644 --- a/board/amcc/yucca/yucca.c +++ b/board/amcc/yucca/yucca.c @@ -167,7 +167,7 @@ int board_early_init_f (void) | 0x07C00000 - 0 0 000 1 1 1 1 1 0000 0 00000 000000000000 | +-------------------------------------------------------------------*/ - mtebc(xbcfg, EBC_CFG_LE_UNLOCK | + mtebc(EBC0_CFG, EBC_CFG_LE_UNLOCK | EBC_CFG_PTD_ENABLE | EBC_CFG_RTC_16PERCLK | EBC_CFG_ATC_PREVIOUS | @@ -188,8 +188,8 @@ int board_early_init_f (void) | boot type | +-------------------------------------------------------------------*/ - mtebc(pb1ap, EBC_BXAP_FPGA); - mtebc(pb1cr, EBC_BXCR_FPGA_CS1); + mtebc(PB1AP, EBC_BXAP_FPGA); + mtebc(PB1CR, EBC_BXCR_FPGA_CS1); /*-------------------------------------------------------------------+ | @@ -334,10 +334,10 @@ int board_early_init_f (void) break; } - mtebc(pb0ap, ebc0_cs0_bxap_value); - mtebc(pb0cr, ebc0_cs0_bxcr_value); - mtebc(pb2ap, ebc0_cs2_bxap_value); - mtebc(pb2cr, ebc0_cs2_bxcr_value); + mtebc(PB0AP, ebc0_cs0_bxap_value); + mtebc(PB0CR, ebc0_cs0_bxcr_value); + mtebc(PB2AP, ebc0_cs2_bxap_value); + mtebc(PB2CR, ebc0_cs2_bxcr_value); /*--------------------------------------------------------------------+ | Interrupt controller setup for the AMCC 440SPe Evaluation board. @@ -530,9 +530,9 @@ int board_early_init_f (void) mtdcr (uic0sr, 0x00000000); /* clear all interrupts */ mtdcr (uic0sr, 0xffffffff); /* clear all interrupts */ - mfsdr(sdr_mfr, mfr); + mfsdr(SDR0_MFR, mfr); mfr |= SDR0_MFR_FIXD; /* Workaround for PCI/DMA */ - mtsdr(sdr_mfr, mfr); + mtsdr(SDR0_MFR, mfr); fpga_init(); @@ -608,7 +608,7 @@ int pci_pre_init(struct pci_controller * hose ) * The yucca board is always configured as the host & requires the * PCI arbiter to be enabled. *-------------------------------------------------------------------*/ - mfsdr(sdr_sdstp1, strap); + mfsdr(SDR0_SDSTP1, strap); if( (strap & SDR0_SDSTP1_PAE_MASK) == 0 ) { printf("PCI: SDR0_STRP1[%08lX] - PCI Arbiter disabled.\n",strap); return 0; diff --git a/board/cray/L1/L1.c b/board/cray/L1/L1.c index 8a06ecc66..5d1c4170d 100644 --- a/board/cray/L1/L1.c +++ b/board/cray/L1/L1.c @@ -198,8 +198,8 @@ static void init_sdram (void) unsigned long tmp; /* write SDRAM bank 0 register */ - mtdcr (memcfga, mem_mb0cf); - mtdcr (memcfgd, 0x00062001); + mtdcr (SDRAM0_CFGADDR, mem_mb0cf); + mtdcr (SDRAM0_CFGDATA, 0x00062001); /* Set the SDRAM Timing reg, SDTR1 and the refresh timer reg, RTR. */ /* To set the appropriate timings, we need to know the SDRAM speed. */ @@ -212,26 +212,26 @@ static void init_sdram (void) /* divisor = ((mfdcr(strap)>> 28) & 0x3); */ /* write SDRAM timing for 100MHz. */ - mtdcr (memcfga, mem_sdtr1); - mtdcr (memcfgd, 0x0086400D); + mtdcr (SDRAM0_CFGADDR, mem_sdtr1); + mtdcr (SDRAM0_CFGDATA, 0x0086400D); /* write SDRAM refresh interval register */ - mtdcr (memcfga, mem_rtr); - mtdcr (memcfgd, 0x05F00000); + mtdcr (SDRAM0_CFGADDR, mem_rtr); + mtdcr (SDRAM0_CFGDATA, 0x05F00000); udelay (200); /* sdram controller.*/ - mtdcr (memcfga, mem_mcopt1); - mtdcr (memcfgd, 0x90800000); + mtdcr (SDRAM0_CFGADDR, mem_mcopt1); + mtdcr (SDRAM0_CFGDATA, 0x90800000); udelay (200); /* initially, disable ECC on all banks */ udelay (200); - mtdcr (memcfga, mem_ecccf); - tmp = mfdcr (memcfgd); + mtdcr (SDRAM0_CFGADDR, mem_ecccf); + tmp = mfdcr (SDRAM0_CFGDATA); tmp &= 0xff0fffff; - mtdcr (memcfga, mem_ecccf); - mtdcr (memcfgd, tmp); + mtdcr (SDRAM0_CFGADDR, mem_ecccf); + mtdcr (SDRAM0_CFGDATA, tmp); return; } @@ -282,18 +282,18 @@ int testdram (void) } printf ("Enable ECC.."); - mtdcr (memcfga, mem_mcopt1); - tmp = (mfdcr (memcfgd) & ~0xFFE00000) | 0x90800000; - mtdcr (memcfga, mem_mcopt1); - mtdcr (memcfgd, tmp); + mtdcr (SDRAM0_CFGADDR, mem_mcopt1); + tmp = (mfdcr (SDRAM0_CFGDATA) & ~0xFFE00000) | 0x90800000; + mtdcr (SDRAM0_CFGADDR, mem_mcopt1); + mtdcr (SDRAM0_CFGDATA, tmp); udelay (600); for (p = (unsigned long) 0; ((unsigned long) p < L1_MEMSIZE); *p++ = 0L) ; udelay (400); - mtdcr (memcfga, mem_ecccf); - tmp = mfdcr (memcfgd); + mtdcr (SDRAM0_CFGADDR, mem_ecccf); + tmp = mfdcr (SDRAM0_CFGDATA); tmp |= 0x00800000; - mtdcr (memcfgd, tmp); + mtdcr (SDRAM0_CFGDATA, tmp); udelay (400); printf ("enabled.\n"); return (0); diff --git a/board/cray/L1/init.S b/board/cray/L1/init.S index d700ea76c..e8dbb93e1 100644 --- a/board/cray/L1/init.S +++ b/board/cray/L1/init.S @@ -87,17 +87,17 @@ ext_bus_cntlr_init: /* Peripheral Bank 0 (Flash) initialization */ /*---------------------------------------------------------------------- */ /* 0x7F8FFE80 slowest boot */ - addi r4,0,pb0ap - mtdcr ebccfga,r4 + addi r4,0,PB1AP + mtdcr EBC0_CFGADDR,r4 addis r4,0,0x9B01 ori r4,r4,0x5480 - mtdcr ebccfgd,r4 + mtdcr EBC0_CFGDATA,r4 - addi r4,0,pb0cr - mtdcr ebccfga,r4 + addi r4,0,PB0CR + mtdcr EBC0_CFGADDR,r4 addis r4,0,0xFFC5 /* BAS=0xFFC,BS=0x4(4MB),BU=0x3(R/W), */ ori r4,r4,0x8000 /* BW=0x0( 8 bits) */ - mtdcr ebccfgd,r4 + mtdcr EBC0_CFGDATA,r4 blr @@ -125,16 +125,16 @@ ext_bus_cntlr_init: /* all reserved bits=0 */ /*---------------------------------------------------------------------- */ /*---------------------------------------------------------------------- */ - addi r4,0,pb1ap - mtdcr ebccfga,r4 + addi r4,0,PB1AP + mtdcr EBC0_CFGADDR,r4 addis r4,0,0x0185 /* hiword */ ori r4,r4,0x4380 /* loword */ - mtdcr ebccfgd,r4 + mtdcr EBC0_CFGDATA,r4 - addi r4,0,pb1cr - mtdcr ebccfga,r4 + addi r4,0,PB1CR + mtdcr EBC0_CFGADDR,r4 addis r4,0,0xF001 /* BAS=0xF00,BS=0x0(1MB),BU=0x3(R/W), */ ori r4,r4,0x8000 /* BW=0x0( 8 bits) */ - mtdcr ebccfgd,r4 + mtdcr EBC0_CFGDATA,r4 blr diff --git a/board/csb272/csb272.c b/board/csb272/csb272.c index 11596d2b7..cb24cd4ff 100644 --- a/board/csb272/csb272.c +++ b/board/csb272/csb272.c @@ -95,7 +95,7 @@ int board_early_init_f(void) mtdcr (uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */ mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */ - mtebc (epcr, 0xa8400000); /* EBC always driven */ + mtebc (EBC0_CFG, 0xa8400000); /* EBC always driven */ return 0; /* success */ } @@ -135,29 +135,29 @@ phys_size_t initdram (int board_type) tot_size = 0; - mtdcr (memcfga, mem_mb0cf); - tmp = mfdcr (memcfgd); + mtdcr (SDRAM0_CFGADDR, mem_mb0cf); + tmp = mfdcr (SDRAM0_CFGDATA); if (tmp & 0x00000001) { bank_size = 0x00400000 << ((tmp >> 17) & 0x7); tot_size += bank_size; } - mtdcr (memcfga, mem_mb1cf); - tmp = mfdcr (memcfgd); + mtdcr (SDRAM0_CFGADDR, mem_mb1cf); + tmp = mfdcr (SDRAM0_CFGDATA); if (tmp & 0x00000001) { bank_size = 0x00400000 << ((tmp >> 17) & 0x7); tot_size += bank_size; } - mtdcr (memcfga, mem_mb2cf); - tmp = mfdcr (memcfgd); + mtdcr (SDRAM0_CFGADDR, mem_mb2cf); + tmp = mfdcr (SDRAM0_CFGDATA); if (tmp & 0x00000001) { bank_size = 0x00400000 << ((tmp >> 17) & 0x7); tot_size += bank_size; } - mtdcr (memcfga, mem_mb3cf); - tmp = mfdcr (memcfgd); + mtdcr (SDRAM0_CFGADDR, mem_mb3cf); + tmp = mfdcr (SDRAM0_CFGDATA); if (tmp & 0x00000001) { bank_size = 0x00400000 << ((tmp >> 17) & 0x7); tot_size += bank_size; diff --git a/board/csb272/init.S b/board/csb272/init.S index 1cfef376a..15b26f8bf 100644 --- a/board/csb272/init.S +++ b/board/csb272/init.S @@ -38,17 +38,17 @@ #define WDCR_EBC(reg,val) \ addi r4,0,reg;\ - mtdcr ebccfga,r4;\ + mtdcr EBC0_CFGADDR,r4;\ addis r4,0,val@h;\ ori r4,r4,val@l;\ - mtdcr ebccfgd,r4 + mtdcr EBC0_CFGDATA,r4 #define WDCR_SDRAM(reg,val) \ addi r4,0,reg;\ - mtdcr memcfga,r4;\ + mtdcr SDRAM0_CFGADDR,r4;\ addis r4,0,val@h;\ ori r4,r4,val@l;\ - mtdcr memcfgd,r4 + mtdcr SDRAM0_CFGDATA,r4 /****************************************************************************** * Function: ext_bus_cntlr_init @@ -106,51 +106,51 @@ ext_bus_cntlr_init: * SETUP CPC0_CR0 *******************************************************************/ LI32(r4, 0x007000c0) - mtdcr cntrl0, r4 + mtdcr CPC0_CR0, r4 /******************************************************************** * Setup CPC0_CR1: Change PCIINT signal to PerWE *******************************************************************/ - mfdcr r4, cntrl1 + mfdcr r4, CPC0_CR1 ori r4, r4, 0x4000 - mtdcr cntrl1, r4 + mtdcr CPC0_CR1, r4 /******************************************************************** * Setup External Bus Controller (EBC). *******************************************************************/ - WDCR_EBC(epcr, 0xd84c0000) + WDCR_EBC(EBC0_CFG, 0xd84c0000) /******************************************************************** * Memory Bank 0 (Intel 28F128J3 Flash) initialization *******************************************************************/ - /*WDCR_EBC(pb0ap, 0x02869200)*/ - WDCR_EBC(pb0ap, 0x07869200) - WDCR_EBC(pb0cr, 0xfe0bc000) + /*WDCR_EBC(PB1AP, 0x02869200)*/ + WDCR_EBC(PB1AP, 0x07869200) + WDCR_EBC(PB0CR, 0xfe0bc000) /******************************************************************** * Memory Bank 1 (Holtek HT6542B PS/2) initialization *******************************************************************/ - WDCR_EBC(pb1ap, 0x1f869200) - WDCR_EBC(pb1cr, 0xf0818000) + WDCR_EBC(PB1AP, 0x1f869200) + WDCR_EBC(PB1CR, 0xf0818000) /******************************************************************** * Memory Bank 2 (Epson S1D13506) initialization *******************************************************************/ - WDCR_EBC(pb2ap, 0x05860300) - WDCR_EBC(pb2cr, 0xf045a000) + WDCR_EBC(PB2AP, 0x05860300) + WDCR_EBC(PB2CR, 0xf045a000) /******************************************************************** * Memory Bank 3 (Philips SJA1000 CAN Controllers) initialization *******************************************************************/ - WDCR_EBC(pb3ap, 0x0387d200) - WDCR_EBC(pb3cr, 0xf021c000) + WDCR_EBC(PB3AP, 0x0387d200) + WDCR_EBC(PB3CR, 0xf021c000) /******************************************************************** * Memory Bank 4-7 (Unused) initialization *******************************************************************/ - WDCR_EBC(pb4ap, 0) - WDCR_EBC(pb4cr, 0) - WDCR_EBC(pb5ap, 0) - WDCR_EBC(pb5cr, 0) - WDCR_EBC(pb6ap, 0) - WDCR_EBC(pb6cr, 0) - WDCR_EBC(pb7ap, 0) - WDCR_EBC(pb7cr, 0) + WDCR_EBC(PB4AP, 0) + WDCR_EBC(PB4CR, 0) + WDCR_EBC(PB5AP, 0) + WDCR_EBC(PB5CR, 0) + WDCR_EBC(PB6AP, 0) + WDCR_EBC(PB6CR, 0) + WDCR_EBC(PB7AP, 0) + WDCR_EBC(PB7CR, 0) /* We are all done */ mtlr r0 /* Restore link register */ diff --git a/board/csb472/csb472.c b/board/csb472/csb472.c index 9dc130efc..fa0fa193e 100644 --- a/board/csb472/csb472.c +++ b/board/csb472/csb472.c @@ -63,7 +63,7 @@ int board_early_init_f(void) mtdcr (uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */ mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */ - mtebc (epcr, 0xa8400000); /* EBC always driven */ + mtebc (EBC0_CFG, 0xa8400000); /* EBC always driven */ return 0; /* success */ } @@ -103,29 +103,29 @@ phys_size_t initdram (int board_type) tot_size = 0; - mtdcr (memcfga, mem_mb0cf); - tmp = mfdcr (memcfgd); + mtdcr (SDRAM0_CFGADDR, mem_mb0cf); + tmp = mfdcr (SDRAM0_CFGDATA); if (tmp & 0x00000001) { bank_size = 0x00400000 << ((tmp >> 17) & 0x7); tot_size += bank_size; } - mtdcr (memcfga, mem_mb1cf); - tmp = mfdcr (memcfgd); + mtdcr (SDRAM0_CFGADDR, mem_mb1cf); + tmp = mfdcr (SDRAM0_CFGDATA); if (tmp & 0x00000001) { bank_size = 0x00400000 << ((tmp >> 17) & 0x7); tot_size += bank_size; } - mtdcr (memcfga, mem_mb2cf); - tmp = mfdcr (memcfgd); + mtdcr (SDRAM0_CFGADDR, mem_mb2cf); + tmp = mfdcr (SDRAM0_CFGDATA); if (tmp & 0x00000001) { bank_size = 0x00400000 << ((tmp >> 17) & 0x7); tot_size += bank_size; } - mtdcr (memcfga, mem_mb3cf); - tmp = mfdcr (memcfgd); + mtdcr (SDRAM0_CFGADDR, mem_mb3cf); + tmp = mfdcr (SDRAM0_CFGDATA); if (tmp & 0x00000001) { bank_size = 0x00400000 << ((tmp >> 17) & 0x7); tot_size += bank_size; diff --git a/board/csb472/init.S b/board/csb472/init.S index 2cf8afc49..105cb71be 100644 --- a/board/csb472/init.S +++ b/board/csb472/init.S @@ -38,17 +38,17 @@ #define WDCR_EBC(reg,val) \ addi r4,0,reg;\ - mtdcr ebccfga,r4;\ + mtdcr EBC0_CFGADDR,r4;\ addis r4,0,val@h;\ ori r4,r4,val@l;\ - mtdcr ebccfgd,r4 + mtdcr EBC0_CFGDATA,r4 #define WDCR_SDRAM(reg,val) \ addi r4,0,reg;\ - mtdcr memcfga,r4;\ + mtdcr SDRAM0_CFGADDR,r4;\ addis r4,0,val@h;\ ori r4,r4,val@l;\ - mtdcr memcfgd,r4 + mtdcr SDRAM0_CFGDATA,r4 /****************************************************************************** * Function: ext_bus_cntlr_init @@ -106,47 +106,47 @@ ext_bus_cntlr_init: * SETUP CPC0_CR0 *******************************************************************/ LI32(r4, 0x00c01030) - mtdcr cntrl0, r4 + mtdcr CPC0_CR0, r4 /******************************************************************** * Setup CPC0_CR1: Change PCIINT signal to PerWE *******************************************************************/ - mfdcr r4, cntrl1 + mfdcr r4, CPC0_CR1 ori r4, r4, 0x4000 - mtdcr cntrl1, r4 + mtdcr CPC0_CR1, r4 /******************************************************************** * Setup External Bus Controller (EBC). *******************************************************************/ - WDCR_EBC(epcr, 0xd84c0000) + WDCR_EBC(EBC0_CFG, 0xd84c0000) /******************************************************************** * Memory Bank 0 (Intel 28F640J3 Flash) initialization *******************************************************************/ - /*WDCR_EBC(pb0ap, 0x03055200)*/ - /*WDCR_EBC(pb0ap, 0x04055200)*/ - WDCR_EBC(pb0ap, 0x08055200) - WDCR_EBC(pb0cr, 0xff87a000) + /*WDCR_EBC(PB1AP, 0x03055200)*/ + /*WDCR_EBC(PB1AP, 0x04055200)*/ + WDCR_EBC(PB1AP, 0x08055200) + WDCR_EBC(PB0CR, 0xff87a000) /******************************************************************** * Memory Bank 3 (Xilinx XC95144 CPLD) initialization *******************************************************************/ - /*WDCR_EBC(pb3ap, 0x07869200)*/ - WDCR_EBC(pb3ap, 0x04055200) - WDCR_EBC(pb3cr, 0xf081c000) + /*WDCR_EBC(PB3AP, 0x07869200)*/ + WDCR_EBC(PB3AP, 0x04055200) + WDCR_EBC(PB3CR, 0xf081c000) /******************************************************************** * Memory Bank 1,2,4-7 (Unused) initialization *******************************************************************/ - WDCR_EBC(pb1ap, 0) - WDCR_EBC(pb1cr, 0) - WDCR_EBC(pb2ap, 0) - WDCR_EBC(pb2cr, 0) - WDCR_EBC(pb4ap, 0) - WDCR_EBC(pb4cr, 0) - WDCR_EBC(pb5ap, 0) - WDCR_EBC(pb5cr, 0) - WDCR_EBC(pb6ap, 0) - WDCR_EBC(pb6cr, 0) - WDCR_EBC(pb7ap, 0) - WDCR_EBC(pb7cr, 0) + WDCR_EBC(PB1AP, 0) + WDCR_EBC(PB1CR, 0) + WDCR_EBC(PB2AP, 0) + WDCR_EBC(PB2CR, 0) + WDCR_EBC(PB4AP, 0) + WDCR_EBC(PB4CR, 0) + WDCR_EBC(PB5AP, 0) + WDCR_EBC(PB5CR, 0) + WDCR_EBC(PB6AP, 0) + WDCR_EBC(PB6CR, 0) + WDCR_EBC(PB7AP, 0) + WDCR_EBC(PB7CR, 0) /* We are all done */ mtlr r0 /* Restore link register */ diff --git a/board/dave/PPChameleonEVB/PPChameleonEVB.c b/board/dave/PPChameleonEVB/PPChameleonEVB.c index a6aa6554b..56751e159 100644 --- a/board/dave/PPChameleonEVB/PPChameleonEVB.c +++ b/board/dave/PPChameleonEVB/PPChameleonEVB.c @@ -65,9 +65,9 @@ int board_early_init_f (void) * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us */ #if 1 /* test-only */ - mtebc (epcr, 0xa8400000); /* ebc always driven */ + mtebc (EBC0_CFG, 0xa8400000); /* ebc always driven */ #else - mtebc (epcr, 0x28400000); /* ebc in high-z */ + mtebc (EBC0_CFG, 0x28400000); /* ebc in high-z */ #endif return 0; } @@ -101,7 +101,7 @@ int misc_init_r (void) int status; int index; int i; - unsigned long cntrl0Reg; + unsigned long CPC0_CR0Reg; dst = malloc(CONFIG_SYS_FPGA_MAX_SIZE); if (gunzip (dst, CONFIG_SYS_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) { diff --git a/board/dave/PPChameleonEVB/flash.c b/board/dave/PPChameleonEVB/flash.c index e5a0d3d17..237c807b4 100644 --- a/board/dave/PPChameleonEVB/flash.c +++ b/board/dave/PPChameleonEVB/flash.c @@ -75,9 +75,9 @@ unsigned long flash_init (void) debug("[%s, %d] Test point ...\n", __FUNCTION__, __LINE__); /* Re-do sizing to get full correct info */ - mtdcr(ebccfga, pb0cr); - pbcr = mfdcr(ebccfgd); - mtdcr(ebccfga, pb0cr); + mtdcr(EBC0_CFGADDR, PB0CR); + pbcr = mfdcr(EBC0_CFGDATA); + mtdcr(EBC0_CFGADDR, PB0CR); base = -size; switch (size) { case 1 << 20: @@ -97,7 +97,7 @@ unsigned long flash_init (void) break; } pbcr = (pbcr & 0x0001ffff) | base | (size_val << 17); - mtdcr(ebccfgd, pbcr); + mtdcr(EBC0_CFGDATA, pbcr); debug("[%s, %d] Test point ...\n", __FUNCTION__, __LINE__); /* Monitor protection ON by default */ diff --git a/board/eric/eric.c b/board/eric/eric.c index 600b9d7a7..bc2a907f6 100644 --- a/board/eric/eric.c +++ b/board/eric/eric.c @@ -70,7 +70,7 @@ int board_early_init_f (void) mtdcr (uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */ mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */ - mtdcr (cntrl0, 0x00002000); /* set IRQ6 as GPIO23 to generate an interrupt request to the PCP2PCI bridge */ + mtdcr (CPC0_CR0, 0x00002000); /* set IRQ6 as GPIO23 to generate an interrupt request to the PCP2PCI bridge */ out32 (PPC405GP_GPIO0_OR, 0x60000000); /*fixme is SMB_INT high or low active??; IRQ6 is GPIO23 output */ out32 (PPC405GP_GPIO0_TCR, 0x7E400000); diff --git a/board/eric/flash.c b/board/eric/flash.c index 7e57513ae..fded41271 100644 --- a/board/eric/flash.c +++ b/board/eric/flash.c @@ -105,24 +105,24 @@ unsigned long flash_init (void) if (size_b1) { - mtdcr(ebccfga, pb0cr); - pbcr = mfdcr(ebccfgd); - mtdcr(ebccfga, pb0cr); + mtdcr(EBC0_CFGADDR, PB0CR); + pbcr = mfdcr(EBC0_CFGDATA); + mtdcr(EBC0_CFGADDR, PB0CR); base_b1 = -size_b1; pbcr = (pbcr & 0x0001ffff) | base_b1 | (((size_b1/1024/1024)-1)<<17); - mtdcr(ebccfgd, pbcr); - /* printf("pb1cr = %x\n", pbcr); */ + mtdcr(EBC0_CFGDATA, pbcr); + /* printf("PB1CR = %x\n", pbcr); */ } if (size_b0) { - mtdcr(ebccfga, pb1cr); - pbcr = mfdcr(ebccfgd); - mtdcr(ebccfga, pb1cr); + mtdcr(EBC0_CFGADDR, PB1CR); + pbcr = mfdcr(EBC0_CFGDATA); + mtdcr(EBC0_CFGADDR, PB1CR); base_b0 = base_b1 - size_b0; pbcr = (pbcr & 0x0001ffff) | base_b0 | (((size_b0/1024/1024)-1)<<17); - mtdcr(ebccfgd, pbcr); - /* printf("pb0cr = %x\n", pbcr); */ + mtdcr(EBC0_CFGDATA, pbcr); + /* printf("PB0CR = %x\n", pbcr); */ } size_b0 = flash_get_size((volatile FLASH_WORD_SIZE *)base_b0, &flash_info[0]); diff --git a/board/eric/init.S b/board/eric/init.S index 4820dd08c..16ab11eae 100644 --- a/board/eric/init.S +++ b/board/eric/init.S @@ -76,129 +76,129 @@ ext_bus_cntlr_init: /* Memory Bank 0 (Flash) initialization (from openbios) */ /*----------------------------------------------------------------------- */ - addi r4,0,pb0ap - mtdcr ebccfga,r4 + addi r4,0,PB1AP + mtdcr EBC0_CFGADDR,r4 addis r4,0,CS0_AP@h ori r4,r4,CS0_AP@l - mtdcr ebccfgd,r4 + mtdcr EBC0_CFGDATA,r4 - addi r4,0,pb0cr - mtdcr ebccfga,r4 + addi r4,0,PB0CR + mtdcr EBC0_CFGADDR,r4 addis r4,0,CS0_CR@h ori r4,r4,CS0_CR@l - mtdcr ebccfgd,r4 + mtdcr EBC0_CFGDATA,r4 /*----------------------------------------------------------------------- */ /* Memory Bank 1 (NVRAM/RTC) initialization */ /*----------------------------------------------------------------------- */ - addi r4,0,pb1ap - mtdcr ebccfga,r4 + addi r4,0,PB1AP + mtdcr EBC0_CFGADDR,r4 addis r4,0,CS1_AP@h ori r4,r4,CS1_AP@l - mtdcr ebccfgd,r4 + mtdcr EBC0_CFGDATA,r4 - addi r4,0,pb1cr - mtdcr ebccfga,r4 + addi r4,0,PB1CR + mtdcr EBC0_CFGADDR,r4 addis r4,0,CS1_CR@h ori r4,r4,CS1_CR@l - mtdcr ebccfgd,r4 + mtdcr EBC0_CFGDATA,r4 /*----------------------------------------------------------------------- */ /* Memory Bank 2 (A/D converter) initialization */ /*----------------------------------------------------------------------- */ - addi r4,0,pb2ap - mtdcr ebccfga,r4 + addi r4,0,PB2AP + mtdcr EBC0_CFGADDR,r4 addis r4,0,CS2_AP@h ori r4,r4,CS2_AP@l - mtdcr ebccfgd,r4 + mtdcr EBC0_CFGDATA,r4 - addi r4,0,pb2cr - mtdcr ebccfga,r4 + addi r4,0,PB2CR + mtdcr EBC0_CFGADDR,r4 addis r4,0,CS2_CR@h ori r4,r4,CS2_CR@l - mtdcr ebccfgd,r4 + mtdcr EBC0_CFGDATA,r4 /*----------------------------------------------------------------------- */ /* Memory Bank 3 (Ethernet PHY Reset) initialization */ /*----------------------------------------------------------------------- */ - addi r4,0,pb3ap - mtdcr ebccfga,r4 + addi r4,0,PB3AP + mtdcr EBC0_CFGADDR,r4 addis r4,0,CS3_AP@h ori r4,r4,CS3_AP@l - mtdcr ebccfgd,r4 + mtdcr EBC0_CFGDATA,r4 - addi r4,0,pb3cr - mtdcr ebccfga,r4 + addi r4,0,PB3CR + mtdcr EBC0_CFGADDR,r4 addis r4,0,CS3_CR@h ori r4,r4,CS3_CR@l - mtdcr ebccfgd,r4 + mtdcr EBC0_CFGDATA,r4 /*----------------------------------------------------------------------- */ /* Memory Bank 4 (PC-MIP PRSNT1#) initialization */ /*----------------------------------------------------------------------- */ - addi r4,0,pb4ap - mtdcr ebccfga,r4 + addi r4,0,PB4AP + mtdcr EBC0_CFGADDR,r4 addis r4,0,CS4_AP@h ori r4,r4,CS4_AP@l - mtdcr ebccfgd,r4 + mtdcr EBC0_CFGDATA,r4 - addi r4,0,pb4cr - mtdcr ebccfga,r4 + addi r4,0,PB4CR + mtdcr EBC0_CFGADDR,r4 addis r4,0,CS4_CR@h ori r4,r4,CS4_CR@l - mtdcr ebccfgd,r4 + mtdcr EBC0_CFGDATA,r4 /*----------------------------------------------------------------------- */ /* Memory Bank 5 (PC-MIP PRSNT2#) initialization */ /*----------------------------------------------------------------------- */ - addi r4,0,pb5ap - mtdcr ebccfga,r4 + addi r4,0,PB5AP + mtdcr EBC0_CFGADDR,r4 addis r4,0,CS5_AP@h ori r4,r4,CS5_AP@l - mtdcr ebccfgd,r4 + mtdcr EBC0_CFGDATA,r4 - addi r4,0,pb5cr - mtdcr ebccfga,r4 + addi r4,0,PB5CR + mtdcr EBC0_CFGADDR,r4 addis r4,0,CS5_CR@h ori r4,r4,CS5_CR@l - mtdcr ebccfgd,r4 + mtdcr EBC0_CFGDATA,r4 /*----------------------------------------------------------------------- */ /* Memory Bank 6 (CPU LED0) initialization */ /*----------------------------------------------------------------------- */ - addi r4,0,pb6ap - mtdcr ebccfga,r4 + addi r4,0,PB6AP + mtdcr EBC0_CFGADDR,r4 addis r4,0,CS6_AP@h ori r4,r4,CS6_AP@l - mtdcr ebccfgd,r4 + mtdcr EBC0_CFGDATA,r4 - addi r4,0,pb6cr - mtdcr ebccfga,r4 + addi r4,0,PB6CR + mtdcr EBC0_CFGADDR,r4 addis r4,0,CS6_CR@h ori r4,r4,CS5_CR@l - mtdcr ebccfgd,r4 + mtdcr EBC0_CFGDATA,r4 /*----------------------------------------------------------------------- */ /* Memory Bank 7 (CPU LED1) initialization */ /*----------------------------------------------------------------------- */ - addi r4,0,pb7ap - mtdcr ebccfga,r4 + addi r4,0,PB7AP + mtdcr EBC0_CFGADDR,r4 addis r4,0,CS7_AP@h ori r4,r4,CS7_AP@l - mtdcr ebccfgd,r4 + mtdcr EBC0_CFGDATA,r4 - addi r4,0,pb7cr - mtdcr ebccfga,r4 + addi r4,0,PB7CR + mtdcr EBC0_CFGADDR,r4 addis r4,0,CS7_CR@h ori r4,r4,CS7_CR@l - mtdcr ebccfgd,r4 + mtdcr EBC0_CFGDATA,r4 /* addis r4,r0,FPGA_BRDC@h */ /* ori r4,r4,FPGA_BRDC@l */ @@ -229,40 +229,40 @@ sdram_init: /*------------------------------------------------------------------- */ addi r4,0,mem_mb0cf - mtdcr memcfga,r4 + mtdcr SDRAM0_CFGADDR,r4 addis r4,0,MB0CF@h ori r4,r4,MB0CF@l - mtdcr memcfgd,r4 + mtdcr SDRAM0_CFGDATA,r4 /*------------------------------------------------------------------- */ /* Set MB1CF for bank 1. (32MB-64MB) Address Mode 4 since 12x8(2) */ /*------------------------------------------------------------------- */ addi r4,0,mem_mb1cf - mtdcr memcfga,r4 + mtdcr SDRAM0_CFGADDR,r4 addis r4,0,MB1CF@h ori r4,r4,MB1CF@l - mtdcr memcfgd,r4 + mtdcr SDRAM0_CFGDATA,r4 /*------------------------------------------------------------------- */ /* Set MB2CF for bank 2. off */ /*------------------------------------------------------------------- */ addi r4,0,mem_mb2cf - mtdcr memcfga,r4 + mtdcr SDRAM0_CFGADDR,r4 addis r4,0,MB2CF@h ori r4,r4,MB2CF@l - mtdcr memcfgd,r4 + mtdcr SDRAM0_CFGDATA,r4 /*------------------------------------------------------------------- */ /* Set MB3CF for bank 3. off */ /*------------------------------------------------------------------- */ addi r4,0,mem_mb3cf - mtdcr memcfga,r4 + mtdcr SDRAM0_CFGADDR,r4 addis r4,0,MB3CF@h ori r4,r4,MB3CF@l - mtdcr memcfgd,r4 + mtdcr SDRAM0_CFGDATA,r4 /*------------------------------------------------------------------- */ /* Set the SDRAM Timing reg, SDTR1 and the refresh timer reg, RTR. */ @@ -276,7 +276,7 @@ sdram_init: /* maybe 133Mhz. */ /*------------------------------------------------------------------- */ - mfdcr r5,strap /* determine FBK divider */ + mfdcr r5,CPC0_PSR /* determine FBK divider */ /* via STRAP reg to calc PLB speed. */ /* SDRAM speed is the same as the PLB */ /* speed. */ @@ -306,15 +306,15 @@ sdram_init: /* Set SDTR1 */ /*------------------------------------------------------------------- */ addi r4,0,mem_sdtr1 - mtdcr memcfga,r4 - mtdcr memcfgd,r6 + mtdcr SDRAM0_CFGADDR,r4 + mtdcr SDRAM0_CFGDATA,r6 /*------------------------------------------------------------------- */ /* Set RTR */ /*------------------------------------------------------------------- */ addi r4,0,mem_rtr - mtdcr memcfga,r4 - mtdcr memcfgd,r7 + mtdcr SDRAM0_CFGADDR,r4 + mtdcr SDRAM0_CFGDATA,r7 /*------------------------------------------------------------------- */ /* Delay to ensure 200usec have elapsed since reset. Assume worst */ @@ -333,10 +333,10 @@ sdram_init: /* read/prefetch. */ /*------------------------------------------------------------------- */ addi r4,0,mem_mcopt1 - mtdcr memcfga,r4 + mtdcr SDRAM0_CFGADDR,r4 addis r4,0,0x8080 /* set DC_EN=1 */ ori r4,r4,0x0000 - mtdcr memcfgd,r4 + mtdcr SDRAM0_CFGDATA,r4 /*------------------------------------------------------------------- */ /* Delay to ensure 10msec have elapsed since reset. This is */ diff --git a/board/esd/apc405/apc405.c b/board/esd/apc405/apc405.c index 5a021552d..46622a29f 100644 --- a/board/esd/apc405/apc405.c +++ b/board/esd/apc405/apc405.c @@ -92,7 +92,7 @@ int N_AU_IMAGES = (sizeof(au_image) / sizeof(au_image[0])); int board_revision(void) { - unsigned long cntrl0Reg; + unsigned long CPC0_CR0Reg; unsigned long value; /* @@ -100,8 +100,8 @@ int board_revision(void) */ /* Setup GPIO pins (CS2/GPIO11, CS3/GPIO12 and CS4/GPIO13 as GPIO) */ - cntrl0Reg = mfdcr(cntrl0); - mtdcr(cntrl0, cntrl0Reg | 0x03800000); + CPC0_CR0Reg = mfdcr(CPC0_CR0); + mtdcr(CPC0_CR0, CPC0_CR0Reg | 0x03800000); out_be32((void*)GPIO0_ODR, in_be32((void*)GPIO0_ODR) & ~0x001c0000); out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) & ~0x001c0000); @@ -113,7 +113,7 @@ int board_revision(void) /* * Restore GPIO settings */ - mtdcr(cntrl0, cntrl0Reg); + mtdcr(CPC0_CR0, CPC0_CR0Reg); switch (value) { case 0x001c0000: @@ -166,7 +166,7 @@ int board_early_init_f (void) /* * EBC Configuration Register: set ready timeout to 512 ebc-clks */ - mtebc(epcr, 0xa8400000); /* ebc always driven */ + mtebc(EBC0_CFG, 0xa8400000); /* ebc always driven */ /* * New boards have a single 32MB flash connected to CS0 @@ -174,12 +174,12 @@ int board_early_init_f (void) */ if (board_revision() >= 8) { /* disable CS1 */ - mtebc(pb1ap, 0); - mtebc(pb1cr, 0); + mtebc(PB1AP, 0); + mtebc(PB1CR, 0); /* resize CS0 to 32MB */ - mtebc(pb0ap, CONFIG_SYS_EBC_PB0AP_HWREV8); - mtebc(pb0cr, CONFIG_SYS_EBC_PB0CR_HWREV8); + mtebc(PB0AP, CONFIG_SYS_EBC_PB0AP_HWREV8); + mtebc(PB0CR, CONFIG_SYS_EBC_PB0CR_HWREV8); } return 0; @@ -209,7 +209,7 @@ int misc_init_r(void) int status; int index; int i; - unsigned long cntrl0Reg; + unsigned long CPC0_CR0Reg; char *str; uchar *logo_addr; ulong logo_size; @@ -219,8 +219,8 @@ int misc_init_r(void) /* * Setup GPIO pins (CS6+CS7 as GPIO) */ - cntrl0Reg = mfdcr(cntrl0); - mtdcr(cntrl0, cntrl0Reg | 0x00300000); + CPC0_CR0Reg = mfdcr(CPC0_CR0); + mtdcr(CPC0_CR0, CPC0_CR0Reg | 0x00300000); dst = malloc(CONFIG_SYS_FPGA_MAX_SIZE); if (gunzip(dst, CONFIG_SYS_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) { @@ -265,7 +265,7 @@ int misc_init_r(void) } /* restore gpio/cs settings */ - mtdcr(cntrl0, cntrl0Reg); + mtdcr(CPC0_CR0, CPC0_CR0Reg); puts("FPGA: "); diff --git a/board/esd/ar405/flash.c b/board/esd/ar405/flash.c index 274ada9fe..a53122b21 100644 --- a/board/esd/ar405/flash.c +++ b/board/esd/ar405/flash.c @@ -65,9 +65,9 @@ unsigned long flash_init (void) flash_get_offsets (-size_b0, &flash_info[0]); /* Re-do sizing to get full correct info */ - mtdcr(ebccfga, pb0cr); - pbcr = mfdcr(ebccfgd); - mtdcr(ebccfga, pb0cr); + mtdcr(EBC0_CFGADDR, PB0CR); + pbcr = mfdcr(EBC0_CFGDATA); + mtdcr(EBC0_CFGADDR, PB0CR); base_b0 = -size_b0; switch (size_b0) { case 1 << 20: @@ -87,7 +87,7 @@ unsigned long flash_init (void) break; } pbcr = (pbcr & 0x0001ffff) | base_b0 | (size_val << 17); - mtdcr(ebccfgd, pbcr); + mtdcr(EBC0_CFGDATA, pbcr); /* Monitor protection ON by default */ (void)flash_protect(FLAG_PROTECT_SET, diff --git a/board/esd/ash405/ash405.c b/board/esd/ash405/ash405.c index 074fe08b1..8da08facf 100644 --- a/board/esd/ash405/ash405.c +++ b/board/esd/ash405/ash405.c @@ -77,7 +77,7 @@ int board_early_init_f (void) /* * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us */ - mtebc (epcr, 0xa8400000); /* ebc always driven */ + mtebc (EBC0_CFG, 0xa8400000); /* ebc always driven */ return 0; } diff --git a/board/esd/ash405/flash.c b/board/esd/ash405/flash.c index 274ada9fe..a53122b21 100644 --- a/board/esd/ash405/flash.c +++ b/board/esd/ash405/flash.c @@ -65,9 +65,9 @@ unsigned long flash_init (void) flash_get_offsets (-size_b0, &flash_info[0]); /* Re-do sizing to get full correct info */ - mtdcr(ebccfga, pb0cr); - pbcr = mfdcr(ebccfgd); - mtdcr(ebccfga, pb0cr); + mtdcr(EBC0_CFGADDR, PB0CR); + pbcr = mfdcr(EBC0_CFGDATA); + mtdcr(EBC0_CFGADDR, PB0CR); base_b0 = -size_b0; switch (size_b0) { case 1 << 20: @@ -87,7 +87,7 @@ unsigned long flash_init (void) break; } pbcr = (pbcr & 0x0001ffff) | base_b0 | (size_val << 17); - mtdcr(ebccfgd, pbcr); + mtdcr(EBC0_CFGDATA, pbcr); /* Monitor protection ON by default */ (void)flash_protect(FLAG_PROTECT_SET, diff --git a/board/esd/canbt/canbt.c b/board/esd/canbt/canbt.c index 2fe6b7bf0..418d3e237 100644 --- a/board/esd/canbt/canbt.c +++ b/board/esd/canbt/canbt.c @@ -52,16 +52,16 @@ const unsigned char fpgadata[] = { int board_early_init_f (void) { - unsigned long cntrl0Reg; + unsigned long CPC0_CR0Reg; int index, len, i; int status; /* * Setup GPIO pins */ - cntrl0Reg = mfdcr (cntrl0) & 0xf0001fff; - cntrl0Reg |= 0x0070f000; - mtdcr (cntrl0, cntrl0Reg); + CPC0_CR0Reg = mfdcr (CPC0_CR0) & 0xf0001fff; + CPC0_CR0Reg |= 0x0070f000; + mtdcr (CPC0_CR0, CPC0_CR0Reg); #ifdef FPGA_DEBUG /* set up serial port with default baudrate */ diff --git a/board/esd/canbt/flash.c b/board/esd/canbt/flash.c index 56c822ec9..224dde4ee 100644 --- a/board/esd/canbt/flash.c +++ b/board/esd/canbt/flash.c @@ -64,13 +64,13 @@ unsigned long flash_init (void) flash_get_offsets (-size_b0, &flash_info[0]); /* Re-do sizing to get full correct info */ - mtdcr(ebccfga, pb0cr); - pbcr = mfdcr(ebccfgd); - mtdcr(ebccfga, pb0cr); + mtdcr(EBC0_CFGADDR, PB0CR); + pbcr = mfdcr(EBC0_CFGDATA); + mtdcr(EBC0_CFGADDR, PB0CR); base_b0 = -size_b0; pbcr = (pbcr & 0x0001ffff) | base_b0 | (((size_b0/1024/1024)-1)<<17); - mtdcr(ebccfgd, pbcr); - /* printf("pb1cr = %x\n", pbcr); */ + mtdcr(EBC0_CFGDATA, pbcr); + /* printf("PB1CR = %x\n", pbcr); */ /* Monitor protection ON by default */ (void)flash_protect(FLAG_PROTECT_SET, diff --git a/board/esd/cms700/cms700.c b/board/esd/cms700/cms700.c index 01b12232b..7a9240189 100644 --- a/board/esd/cms700/cms700.c +++ b/board/esd/cms700/cms700.c @@ -56,7 +56,7 @@ int board_early_init_f (void) /* * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us */ - mtebc (epcr, 0xa8400000); /* ebc always driven */ + mtebc (EBC0_CFG, 0xa8400000); /* ebc always driven */ /* * Reset CPLD via GPIO12 (CS3) pin diff --git a/board/esd/cms700/flash.c b/board/esd/cms700/flash.c index 274ada9fe..a53122b21 100644 --- a/board/esd/cms700/flash.c +++ b/board/esd/cms700/flash.c @@ -65,9 +65,9 @@ unsigned long flash_init (void) flash_get_offsets (-size_b0, &flash_info[0]); /* Re-do sizing to get full correct info */ - mtdcr(ebccfga, pb0cr); - pbcr = mfdcr(ebccfgd); - mtdcr(ebccfga, pb0cr); + mtdcr(EBC0_CFGADDR, PB0CR); + pbcr = mfdcr(EBC0_CFGDATA); + mtdcr(EBC0_CFGADDR, PB0CR); base_b0 = -size_b0; switch (size_b0) { case 1 << 20: @@ -87,7 +87,7 @@ unsigned long flash_init (void) break; } pbcr = (pbcr & 0x0001ffff) | base_b0 | (size_val << 17); - mtdcr(ebccfgd, pbcr); + mtdcr(EBC0_CFGDATA, pbcr); /* Monitor protection ON by default */ (void)flash_protect(FLAG_PROTECT_SET, diff --git a/board/esd/cpci2dp/cpci2dp.c b/board/esd/cpci2dp/cpci2dp.c index cd57ed459..00c7024a8 100644 --- a/board/esd/cpci2dp/cpci2dp.c +++ b/board/esd/cpci2dp/cpci2dp.c @@ -31,13 +31,13 @@ DECLARE_GLOBAL_DATA_PTR; int board_early_init_f (void) { - unsigned long cntrl0Reg; + unsigned long CPC0_CR0Reg; /* * Setup GPIO pins */ - cntrl0Reg = mfdcr(cntrl0); - mtdcr(cntrl0, cntrl0Reg | + CPC0_CR0Reg = mfdcr(CPC0_CR0); + mtdcr(CPC0_CR0, CPC0_CR0Reg | ((CONFIG_SYS_EEPROM_WP | CONFIG_SYS_PB_LED | CONFIG_SYS_SELF_RST | CONFIG_SYS_INTA_FAKE) << 5)); @@ -72,7 +72,7 @@ int board_early_init_f (void) int misc_init_r (void) { - unsigned long cntrl0Reg; + unsigned long CPC0_CR0Reg; /* adjust flash start and offset */ gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize; @@ -81,8 +81,8 @@ int misc_init_r (void) /* * Select cts (and not dsr) on uart1 */ - cntrl0Reg = mfdcr(cntrl0); - mtdcr(cntrl0, cntrl0Reg | 0x00001000); + CPC0_CR0Reg = mfdcr(CPC0_CR0); + mtdcr(CPC0_CR0, CPC0_CR0Reg | 0x00001000); return (0); } diff --git a/board/esd/cpci2dp/flash.c b/board/esd/cpci2dp/flash.c index 56c822ec9..224dde4ee 100644 --- a/board/esd/cpci2dp/flash.c +++ b/board/esd/cpci2dp/flash.c @@ -64,13 +64,13 @@ unsigned long flash_init (void) flash_get_offsets (-size_b0, &flash_info[0]); /* Re-do sizing to get full correct info */ - mtdcr(ebccfga, pb0cr); - pbcr = mfdcr(ebccfgd); - mtdcr(ebccfga, pb0cr); + mtdcr(EBC0_CFGADDR, PB0CR); + pbcr = mfdcr(EBC0_CFGDATA); + mtdcr(EBC0_CFGADDR, PB0CR); base_b0 = -size_b0; pbcr = (pbcr & 0x0001ffff) | base_b0 | (((size_b0/1024/1024)-1)<<17); - mtdcr(ebccfgd, pbcr); - /* printf("pb1cr = %x\n", pbcr); */ + mtdcr(EBC0_CFGDATA, pbcr); + /* printf("PB1CR = %x\n", pbcr); */ /* Monitor protection ON by default */ (void)flash_protect(FLAG_PROTECT_SET, diff --git a/board/esd/cpci405/cpci405.c b/board/esd/cpci405/cpci405.c index a677c623f..4c9ed2fa5 100644 --- a/board/esd/cpci405/cpci405.c +++ b/board/esd/cpci405/cpci405.c @@ -214,7 +214,7 @@ int ctermm2(void) int cpci405_host(void) { - if (mfdcr(strap) & PSR_PCI_ARBIT_EN) + if (mfdcr(CPC0_PSR) & PSR_PCI_ARBIT_EN) return -1; /* yes, board is cpci405 host */ else return 0; /* no, board is cpci405 adapter */ @@ -222,14 +222,14 @@ int cpci405_host(void) int cpci405_version(void) { - unsigned long cntrl0Reg; + unsigned long CPC0_CR0Reg; unsigned long value; /* * Setup GPIO pins (CS2/GPIO11 and CS3/GPIO12 as GPIO) */ - cntrl0Reg = mfdcr(cntrl0); - mtdcr(cntrl0, cntrl0Reg | 0x03000000); + CPC0_CR0Reg = mfdcr(CPC0_CR0); + mtdcr(CPC0_CR0, CPC0_CR0Reg | 0x03000000); out_be32((void*)GPIO0_ODR, in_be32((void*)GPIO0_ODR) & ~0x00180000); out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) & ~0x00180000); udelay(1000); /* wait some time before reading input */ @@ -238,7 +238,7 @@ int cpci405_version(void) /* * Restore GPIO settings */ - mtdcr(cntrl0, cntrl0Reg); + mtdcr(CPC0_CR0, CPC0_CR0Reg); switch (value) { case 0x00180000: @@ -261,7 +261,7 @@ int cpci405_version(void) int misc_init_r (void) { - unsigned long cntrl0Reg; + unsigned long CPC0_CR0Reg; /* adjust flash start and offset */ gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize; @@ -283,8 +283,8 @@ int misc_init_r (void) /* * Setup GPIO pins (CS6+CS7 as GPIO) */ - cntrl0Reg = mfdcr(cntrl0); - mtdcr(cntrl0, cntrl0Reg | 0x00300000); + CPC0_CR0Reg = mfdcr(CPC0_CR0); + mtdcr(CPC0_CR0, CPC0_CR0Reg | 0x00300000); dst = malloc(CONFIG_SYS_FPGA_MAX_SIZE); if (gunzip(dst, CONFIG_SYS_FPGA_MAX_SIZE, @@ -330,7 +330,7 @@ int misc_init_r (void) } /* restore gpio/cs settings */ - mtdcr(cntrl0, cntrl0Reg); + mtdcr(CPC0_CR0, CPC0_CR0Reg); puts("FPGA: "); @@ -400,8 +400,8 @@ int misc_init_r (void) /* * Select cts (and not dsr) on uart1 */ - cntrl0Reg = mfdcr(cntrl0); - mtdcr(cntrl0, cntrl0Reg | 0x00001000); + CPC0_CR0Reg = mfdcr(CPC0_CR0); + mtdcr(CPC0_CR0, CPC0_CR0Reg | 0x00001000); return 0; } diff --git a/board/esd/cpci405/flash.c b/board/esd/cpci405/flash.c index d535924f8..4fcf174d1 100644 --- a/board/esd/cpci405/flash.c +++ b/board/esd/cpci405/flash.c @@ -91,13 +91,13 @@ unsigned long flash_init (void) size_b1 = 1 << 20; } base_b1 = -size_b1; - mtdcr (ebccfga, pb0cr); - pbcr = mfdcr (ebccfgd); - mtdcr (ebccfga, pb0cr); + mtdcr (EBC0_CFGADDR, PB0CR); + pbcr = mfdcr (EBC0_CFGDATA); + mtdcr (EBC0_CFGADDR, PB0CR); pbcr = (pbcr & 0x0001ffff) | base_b1 | (calc_size(size_b1) << 17); - mtdcr (ebccfgd, pbcr); + mtdcr (EBC0_CFGDATA, pbcr); #if 0 /* test-only */ - printf("size_b1=%x base_b1=%x pb1cr = %x\n", + printf("size_b1=%x base_b1=%x PB1CR = %x\n", size_b1, base_b1, pbcr); /* test-only */ #endif } @@ -108,13 +108,13 @@ unsigned long flash_init (void) size_b0 = 1 << 20; } base_b0 = base_b1 - size_b0; - mtdcr (ebccfga, pb1cr); - pbcr = mfdcr (ebccfgd); - mtdcr (ebccfga, pb1cr); + mtdcr (EBC0_CFGADDR, PB1CR); + pbcr = mfdcr (EBC0_CFGDATA); + mtdcr (EBC0_CFGADDR, PB1CR); pbcr = (pbcr & 0x0001ffff) | base_b0 | (calc_size(size_b0) << 17); - mtdcr (ebccfgd, pbcr); + mtdcr (EBC0_CFGDATA, pbcr); #if 0 /* test-only */ - printf("size_b0=%x base_b0=%x pb0cr = %x\n", + printf("size_b0=%x base_b0=%x PB0CR = %x\n", size_b0, base_b0, pbcr); /* test-only */ #endif } diff --git a/board/esd/cpciiser4/flash.c b/board/esd/cpciiser4/flash.c index 56c822ec9..224dde4ee 100644 --- a/board/esd/cpciiser4/flash.c +++ b/board/esd/cpciiser4/flash.c @@ -64,13 +64,13 @@ unsigned long flash_init (void) flash_get_offsets (-size_b0, &flash_info[0]); /* Re-do sizing to get full correct info */ - mtdcr(ebccfga, pb0cr); - pbcr = mfdcr(ebccfgd); - mtdcr(ebccfga, pb0cr); + mtdcr(EBC0_CFGADDR, PB0CR); + pbcr = mfdcr(EBC0_CFGDATA); + mtdcr(EBC0_CFGADDR, PB0CR); base_b0 = -size_b0; pbcr = (pbcr & 0x0001ffff) | base_b0 | (((size_b0/1024/1024)-1)<<17); - mtdcr(ebccfgd, pbcr); - /* printf("pb1cr = %x\n", pbcr); */ + mtdcr(EBC0_CFGDATA, pbcr); + /* printf("PB1CR = %x\n", pbcr); */ /* Monitor protection ON by default */ (void)flash_protect(FLAG_PROTECT_SET, diff --git a/board/esd/dp405/dp405.c b/board/esd/dp405/dp405.c index e52d37bc2..fc0d091bc 100644 --- a/board/esd/dp405/dp405.c +++ b/board/esd/dp405/dp405.c @@ -54,7 +54,7 @@ int board_early_init_f (void) /* * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us */ - mtebc (epcr, 0xa8400000); /* ebc always driven */ + mtebc (EBC0_CFG, 0xa8400000); /* ebc always driven */ /* * Reset CPLD via GPIO13 (CS4) pin diff --git a/board/esd/dp405/flash.c b/board/esd/dp405/flash.c index 274ada9fe..a53122b21 100644 --- a/board/esd/dp405/flash.c +++ b/board/esd/dp405/flash.c @@ -65,9 +65,9 @@ unsigned long flash_init (void) flash_get_offsets (-size_b0, &flash_info[0]); /* Re-do sizing to get full correct info */ - mtdcr(ebccfga, pb0cr); - pbcr = mfdcr(ebccfgd); - mtdcr(ebccfga, pb0cr); + mtdcr(EBC0_CFGADDR, PB0CR); + pbcr = mfdcr(EBC0_CFGDATA); + mtdcr(EBC0_CFGADDR, PB0CR); base_b0 = -size_b0; switch (size_b0) { case 1 << 20: @@ -87,7 +87,7 @@ unsigned long flash_init (void) break; } pbcr = (pbcr & 0x0001ffff) | base_b0 | (size_val << 17); - mtdcr(ebccfgd, pbcr); + mtdcr(EBC0_CFGDATA, pbcr); /* Monitor protection ON by default */ (void)flash_protect(FLAG_PROTECT_SET, diff --git a/board/esd/du405/du405.c b/board/esd/du405/du405.c index 8e9ac28b1..28a50c7b0 100644 --- a/board/esd/du405/du405.c +++ b/board/esd/du405/du405.c @@ -135,7 +135,7 @@ int board_early_init_f (void) /* * EBC Configuration Register: set ready timeout to 100 us */ - mtebc (epcr, 0xb8400000); + mtebc (EBC0_CFG, 0xb8400000); return 0; } @@ -143,13 +143,13 @@ int board_early_init_f (void) int misc_init_r (void) { - unsigned long cntrl0Reg; + unsigned long CPC0_CR0Reg; /* * Setup UART1 handshaking: use CTS instead of DSR */ - cntrl0Reg = mfdcr(cntrl0); - mtdcr(cntrl0, cntrl0Reg | 0x00001000); + CPC0_CR0Reg = mfdcr(CPC0_CR0); + mtdcr(CPC0_CR0, CPC0_CR0Reg | 0x00001000); return (0); } diff --git a/board/esd/du405/flash.c b/board/esd/du405/flash.c index 240aa09f5..c62c6a9b0 100644 --- a/board/esd/du405/flash.c +++ b/board/esd/du405/flash.c @@ -67,25 +67,25 @@ unsigned long flash_init (void) /* Re-do sizing to get full correct info */ if (size_b1) { - mtdcr (ebccfga, pb0cr); - pbcr = mfdcr (ebccfgd); - mtdcr (ebccfga, pb0cr); + mtdcr (EBC0_CFGADDR, PB0CR); + pbcr = mfdcr (EBC0_CFGDATA); + mtdcr (EBC0_CFGADDR, PB0CR); base_b1 = -size_b1; pbcr = (pbcr & 0x0001ffff) | base_b1 | (((size_b1 / 1024 / 1024) - 1) << 17); - mtdcr (ebccfgd, pbcr); - /* printf("pb1cr = %x\n", pbcr); */ + mtdcr (EBC0_CFGDATA, pbcr); + /* printf("PB1CR = %x\n", pbcr); */ } if (size_b0) { - mtdcr (ebccfga, pb1cr); - pbcr = mfdcr (ebccfgd); - mtdcr (ebccfga, pb1cr); + mtdcr (EBC0_CFGADDR, PB1CR); + pbcr = mfdcr (EBC0_CFGDATA); + mtdcr (EBC0_CFGADDR, PB1CR); base_b0 = base_b1 - size_b0; pbcr = (pbcr & 0x0001ffff) | base_b0 | (((size_b0 / 1024 / 1024) - 1) << 17); - mtdcr (ebccfgd, pbcr); - /* printf("pb0cr = %x\n", pbcr); */ + mtdcr (EBC0_CFGDATA, pbcr); + /* printf("PB0CR = %x\n", pbcr); */ } size_b0 = flash_get_size ((vu_long *) base_b0, &flash_info[0]); diff --git a/board/esd/du440/du440.c b/board/esd/du440/du440.c index 0ec519b8d..376de9835 100644 --- a/board/esd/du440/du440.c +++ b/board/esd/du440/du440.c @@ -45,8 +45,8 @@ int board_early_init_f(void) u32 sdr0_pfc1, sdr0_pfc2; u32 reg; - mtdcr(ebccfga, xbcfg); - mtdcr(ebccfgd, 0xb8400000); + mtdcr(EBC0_CFGADDR, EBC0_CFG); + mtdcr(EBC0_CFGDATA, 0xb8400000); /* * Setup the GPIO pins @@ -145,8 +145,8 @@ int board_early_init_f(void) mtsdr(SDR0_PFC1, sdr0_pfc1); /* PCI arbiter enabled */ - mfsdr(sdr_pci0, reg); - mtsdr(sdr_pci0, 0x80000000 | reg); + mfsdr(SDR0_PCI0, reg); + mtsdr(SDR0_PCI0, 0x80000000 | reg); /* setup NAND FLASH */ mfsdr(SDR0_CUST0, sdr0_cust0); @@ -176,12 +176,12 @@ int misc_init_r(void) gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize; gd->bd->bi_flashoffset = 0; - mtdcr(ebccfga, pb0cr); - pbcr = mfdcr(ebccfgd); + mtdcr(EBC0_CFGADDR, PB0CR); + pbcr = mfdcr(EBC0_CFGDATA); size_val = ffs(gd->bd->bi_flashsize) - 21; pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17); - mtdcr(ebccfga, pb0cr); - mtdcr(ebccfgd, pbcr); + mtdcr(EBC0_CFGADDR, PB0CR); + mtdcr(EBC0_CFGDATA, pbcr); /* * Re-check to get correct base address @@ -265,8 +265,8 @@ int misc_init_r(void) * This fix will make the MAL burst disabling patch for the Linux * EMAC driver obsolete. */ - reg = mfdcr(plb4_acr) & ~PLB4_ACR_WRP; - mtdcr(plb4_acr, reg); + reg = mfdcr(PLB4_ACR) & ~PLB4_ACR_WRP; + mtdcr(PLB4_ACR, reg); /* * release IO-RST# @@ -380,35 +380,35 @@ int pci_pre_init(struct pci_controller *hose) * Set priority for all PLB3 devices to 0. * Set PLB3 arbiter to fair mode. */ - mfsdr(sdr_amp1, addr); - mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00); - addr = mfdcr(plb3_acr); - mtdcr(plb3_acr, addr | 0x80000000); + mfsdr(SD0_AMP1, addr); + mtsdr(SD0_AMP1, (addr & 0x000000FF) | 0x0000FF00); + addr = mfdcr(PLB3_ACR); + mtdcr(PLB3_ACR, addr | 0x80000000); /* * Set priority for all PLB4 devices to 0. */ - mfsdr(sdr_amp0, addr); - mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00); - addr = mfdcr(plb4_acr) | 0xa0000000; /* Was 0x8---- */ - mtdcr(plb4_acr, addr); + mfsdr(SD0_AMP0, addr); + mtsdr(SD0_AMP0, (addr & 0x000000FF) | 0x0000FF00); + addr = mfdcr(PLB4_ACR) | 0xa0000000; /* Was 0x8---- */ + mtdcr(PLB4_ACR, addr); /* * Set Nebula PLB4 arbiter to fair mode. */ /* Segment0 */ - addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair; - addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled; - addr = (addr & ~plb0_acr_rdp_mask) | plb0_acr_rdp_4deep; - addr = (addr & ~plb0_acr_wrp_mask) | plb0_acr_wrp_2deep; - mtdcr(plb0_acr, addr); + addr = (mfdcr(PLB0_ACR) & ~PLB0_ACR_PPM_MASK) | PLB0_ACR_PPM_FAIR; + addr = (addr & ~PLB0_ACR_HBU_MASK) | PLB0_ACR_HBU_ENABLED; + addr = (addr & ~PLB0_ACR_RDP_MASK) | PLB0_ACR_RDP_4DEEP; + addr = (addr & ~PLB0_ACR_WRP_MASK) | PLB0_ACR_WRP_2DEEP; + mtdcr(PLB0_ACR, addr); /* Segment1 */ - addr = (mfdcr(plb1_acr) & ~plb1_acr_ppm_mask) | plb1_acr_ppm_fair; - addr = (addr & ~plb1_acr_hbu_mask) | plb1_acr_hbu_enabled; - addr = (addr & ~plb1_acr_rdp_mask) | plb1_acr_rdp_4deep; - addr = (addr & ~plb1_acr_wrp_mask) | plb1_acr_wrp_2deep; - mtdcr(plb1_acr, addr); + addr = (mfdcr(PLB1_ACR) & ~PLB1_ACR_PPM_MASK) | PLB1_ACR_PPM_FAIR; + addr = (addr & ~PLB1_ACR_HBU_MASK) | PLB1_ACR_HBU_ENABLED; + addr = (addr & ~PLB1_ACR_RDP_MASK) | PLB1_ACR_RDP_4DEEP; + addr = (addr & ~PLB1_ACR_WRP_MASK) | PLB1_ACR_WRP_2DEEP; + mtdcr(PLB1_ACR, addr); return 1; } diff --git a/board/esd/hh405/flash.c b/board/esd/hh405/flash.c index 274ada9fe..a53122b21 100644 --- a/board/esd/hh405/flash.c +++ b/board/esd/hh405/flash.c @@ -65,9 +65,9 @@ unsigned long flash_init (void) flash_get_offsets (-size_b0, &flash_info[0]); /* Re-do sizing to get full correct info */ - mtdcr(ebccfga, pb0cr); - pbcr = mfdcr(ebccfgd); - mtdcr(ebccfga, pb0cr); + mtdcr(EBC0_CFGADDR, PB0CR); + pbcr = mfdcr(EBC0_CFGDATA); + mtdcr(EBC0_CFGADDR, PB0CR); base_b0 = -size_b0; switch (size_b0) { case 1 << 20: @@ -87,7 +87,7 @@ unsigned long flash_init (void) break; } pbcr = (pbcr & 0x0001ffff) | base_b0 | (size_val << 17); - mtdcr(ebccfgd, pbcr); + mtdcr(EBC0_CFGDATA, pbcr); /* Monitor protection ON by default */ (void)flash_protect(FLAG_PROTECT_SET, diff --git a/board/esd/hh405/hh405.c b/board/esd/hh405/hh405.c index 5ae4c7586..b72b716dd 100644 --- a/board/esd/hh405/hh405.c +++ b/board/esd/hh405/hh405.c @@ -374,7 +374,7 @@ int board_early_init_f (void) /* * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us */ - mtebc(epcr, 0xa8400000); /* ebc always driven */ + mtebc(EBC0_CFG, 0xa8400000); /* ebc always driven */ return 0; } diff --git a/board/esd/hub405/flash.c b/board/esd/hub405/flash.c index 274ada9fe..a53122b21 100644 --- a/board/esd/hub405/flash.c +++ b/board/esd/hub405/flash.c @@ -65,9 +65,9 @@ unsigned long flash_init (void) flash_get_offsets (-size_b0, &flash_info[0]); /* Re-do sizing to get full correct info */ - mtdcr(ebccfga, pb0cr); - pbcr = mfdcr(ebccfgd); - mtdcr(ebccfga, pb0cr); + mtdcr(EBC0_CFGADDR, PB0CR); + pbcr = mfdcr(EBC0_CFGDATA); + mtdcr(EBC0_CFGADDR, PB0CR); base_b0 = -size_b0; switch (size_b0) { case 1 << 20: @@ -87,7 +87,7 @@ unsigned long flash_init (void) break; } pbcr = (pbcr & 0x0001ffff) | base_b0 | (size_val << 17); - mtdcr(ebccfgd, pbcr); + mtdcr(EBC0_CFGDATA, pbcr); /* Monitor protection ON by default */ (void)flash_protect(FLAG_PROTECT_SET, diff --git a/board/esd/hub405/hub405.c b/board/esd/hub405/hub405.c index 03e5ad7dd..acb23dad1 100644 --- a/board/esd/hub405/hub405.c +++ b/board/esd/hub405/hub405.c @@ -97,7 +97,7 @@ int board_early_init_f (void) /* * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us */ - mtebc (epcr, 0xa8400000); /* ebc always driven */ + mtebc (EBC0_CFG, 0xa8400000); /* ebc always driven */ return 0; } diff --git a/board/esd/ocrtc/flash.c b/board/esd/ocrtc/flash.c index e763a895e..eda7c5713 100644 --- a/board/esd/ocrtc/flash.c +++ b/board/esd/ocrtc/flash.c @@ -68,9 +68,9 @@ unsigned long flash_init (void) /* Re-do sizing to get full correct info */ if (size_b1) { - mtdcr (ebccfga, pb0cr); - pbcr = mfdcr (ebccfgd); - mtdcr (ebccfga, pb0cr); + mtdcr (EBC0_CFGADDR, PB0CR); + pbcr = mfdcr (EBC0_CFGDATA); + mtdcr (EBC0_CFGADDR, PB0CR); base_b1 = -size_b1; switch (size_b1) { case 1 << 20: @@ -90,14 +90,14 @@ unsigned long flash_init (void) break; } pbcr = (pbcr & 0x0001ffff) | base_b1 | (size_val << 17); - mtdcr (ebccfgd, pbcr); - /* printf("pb1cr = %x\n", pbcr); */ + mtdcr (EBC0_CFGDATA, pbcr); + /* printf("PB1CR = %x\n", pbcr); */ } if (size_b0) { - mtdcr (ebccfga, pb1cr); - pbcr = mfdcr (ebccfgd); - mtdcr (ebccfga, pb1cr); + mtdcr (EBC0_CFGADDR, PB1CR); + pbcr = mfdcr (EBC0_CFGDATA); + mtdcr (EBC0_CFGADDR, PB1CR); base_b0 = base_b1 - size_b0; switch (size_b1) { case 1 << 20: @@ -117,8 +117,8 @@ unsigned long flash_init (void) break; } pbcr = (pbcr & 0x0001ffff) | base_b0 | (size_val << 17); - mtdcr (ebccfgd, pbcr); - /* printf("pb0cr = %x\n", pbcr); */ + mtdcr (EBC0_CFGDATA, pbcr); + /* printf("PB0CR = %x\n", pbcr); */ } size_b0 = flash_get_size ((vu_long *) base_b0, &flash_info[0]); diff --git a/board/esd/ocrtc/ocrtc.c b/board/esd/ocrtc/ocrtc.c index 35bfa95f2..709bcdd98 100644 --- a/board/esd/ocrtc/ocrtc.c +++ b/board/esd/ocrtc/ocrtc.c @@ -57,7 +57,7 @@ int board_early_init_f (void) * EBC Configuration Register: clear EBTC -> high-Z ebc signals between * transfers, set device-paced timeout to 256 cycles */ - mtebc (epcr, 0x20400000); + mtebc (EBC0_CFG, 0x20400000); return 0; } diff --git a/board/esd/pci405/flash.c b/board/esd/pci405/flash.c index 905848380..67a7bb5d8 100644 --- a/board/esd/pci405/flash.c +++ b/board/esd/pci405/flash.c @@ -65,9 +65,9 @@ unsigned long flash_init (void) flash_get_offsets (-size_b0, &flash_info[0]); /* Re-do sizing to get full correct info */ - mtdcr(ebccfga, pb0cr); - pbcr = mfdcr(ebccfgd); - mtdcr(ebccfga, pb0cr); + mtdcr(EBC0_CFGADDR, PB0CR); + pbcr = mfdcr(EBC0_CFGDATA); + mtdcr(EBC0_CFGADDR, PB0CR); base_b0 = -size_b0; switch (size_b0) { case 1 << 20: @@ -87,7 +87,7 @@ unsigned long flash_init (void) break; } pbcr = (pbcr & 0x0001ffff) | base_b0 | (size_val << 17); - mtdcr(ebccfgd, pbcr); + mtdcr(EBC0_CFGDATA, pbcr); /* Monitor protection ON by default */ (void)flash_protect(FLAG_PROTECT_SET, diff --git a/board/esd/pci405/pci405.c b/board/esd/pci405/pci405.c index 56184caa8..04bc569ea 100644 --- a/board/esd/pci405/pci405.c +++ b/board/esd/pci405/pci405.c @@ -67,7 +67,7 @@ const unsigned char fpgadata[] = int board_revision(void) { - unsigned long cntrl0Reg; + unsigned long CPC0_CR0Reg; unsigned long value; /* @@ -77,8 +77,8 @@ int board_revision(void) /* * Setup GPIO pins (CS2/GPIO11 and CS3/GPIO12 as GPIO) */ - cntrl0Reg = mfdcr(cntrl0); - mtdcr(cntrl0, cntrl0Reg | 0x03000000); + CPC0_CR0Reg = mfdcr(CPC0_CR0); + mtdcr(CPC0_CR0, CPC0_CR0Reg | 0x03000000); out_be32((void*)GPIO0_ODR, in_be32((void*)GPIO0_ODR) & ~0x00100200); out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) & ~0x00100200); udelay(1000); /* wait some time before reading input */ @@ -87,7 +87,7 @@ int board_revision(void) /* * Restore GPIO settings */ - mtdcr(cntrl0, cntrl0Reg); + mtdcr(CPC0_CR0, CPC0_CR0Reg); switch (value) { case 0x00100200: @@ -133,7 +133,7 @@ unsigned long fpga_init_state(void) int board_early_init_f (void) { - unsigned long cntrl0Reg; + unsigned long CPC0_CR0Reg; /* * First pull fpga-prg pin low, to disable fpga logic (on version 1.2 board) @@ -166,18 +166,18 @@ int board_early_init_f (void) /* * Setup GPIO pins (IRQ4/GPIO21 as GPIO) */ - cntrl0Reg = mfdcr(cntrl0); - mtdcr(cntrl0, cntrl0Reg | 0x00008000); + CPC0_CR0Reg = mfdcr(CPC0_CR0); + mtdcr(CPC0_CR0, CPC0_CR0Reg | 0x00008000); /* * Setup GPIO pins (CS6+CS7 as GPIO) */ - mtdcr(cntrl0, cntrl0Reg | 0x00300000); + mtdcr(CPC0_CR0, CPC0_CR0Reg | 0x00300000); /* * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 25 us */ - mtebc (epcr, 0xa8400000); /* ebc always driven */ + mtebc (EBC0_CFG, 0xa8400000); /* ebc always driven */ return 0; } @@ -282,11 +282,11 @@ int misc_init_r (void) #define PCI0_BRDGOPT1 0x4a pci_write_config_word(PCIDEVID_405GP, PCI0_BRDGOPT1, 0x3f20); -#define plb0_acr 0x87 +#define PLB0_ACR 0x87 /* * Enable fairness and high bus utilization */ - mtdcr(plb0_acr, 0x98000000); + mtdcr(PLB0_ACR, 0x98000000); free(dst); return (0); @@ -313,14 +313,14 @@ int checkboard (void) printf(" (Rev 1.%ld", gd->board_type); if (gd->board_type >= 2) { - unsigned long cntrl0Reg; + unsigned long CPC0_CR0Reg; unsigned long value; /* * Setup GPIO pins (Trace/GPIO1 to GPIO) */ - cntrl0Reg = mfdcr(cntrl0); - mtdcr(cntrl0, cntrl0Reg & ~0x08000000); + CPC0_CR0Reg = mfdcr(CPC0_CR0); + mtdcr(CPC0_CR0, CPC0_CR0Reg & ~0x08000000); out_be32((void*)GPIO0_ODR, in_be32((void*)GPIO0_ODR) & ~0x40000000); out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) & ~0x40000000); udelay(1000); /* wait some time before reading input */ diff --git a/board/esd/plu405/flash.c b/board/esd/plu405/flash.c index 274ada9fe..a53122b21 100644 --- a/board/esd/plu405/flash.c +++ b/board/esd/plu405/flash.c @@ -65,9 +65,9 @@ unsigned long flash_init (void) flash_get_offsets (-size_b0, &flash_info[0]); /* Re-do sizing to get full correct info */ - mtdcr(ebccfga, pb0cr); - pbcr = mfdcr(ebccfgd); - mtdcr(ebccfga, pb0cr); + mtdcr(EBC0_CFGADDR, PB0CR); + pbcr = mfdcr(EBC0_CFGDATA); + mtdcr(EBC0_CFGADDR, PB0CR); base_b0 = -size_b0; switch (size_b0) { case 1 << 20: @@ -87,7 +87,7 @@ unsigned long flash_init (void) break; } pbcr = (pbcr & 0x0001ffff) | base_b0 | (size_val << 17); - mtdcr(ebccfgd, pbcr); + mtdcr(EBC0_CFGDATA, pbcr); /* Monitor protection ON by default */ (void)flash_protect(FLAG_PROTECT_SET, diff --git a/board/esd/plu405/plu405.c b/board/esd/plu405/plu405.c index e41545a93..a3c1cec6e 100644 --- a/board/esd/plu405/plu405.c +++ b/board/esd/plu405/plu405.c @@ -90,7 +90,7 @@ int board_early_init_f(void) * EBC Configuration Register: set ready timeout to * 512 ebc-clks -> ca. 15 us */ - mtebc(epcr, 0xa8400000); /* ebc always driven */ + mtebc(EBC0_CFG, 0xa8400000); /* ebc always driven */ return 0; } diff --git a/board/esd/pmc405/pmc405.c b/board/esd/pmc405/pmc405.c index 192a642ae..5ff87e7a2 100644 --- a/board/esd/pmc405/pmc405.c +++ b/board/esd/pmc405/pmc405.c @@ -60,12 +60,12 @@ int board_early_init_f (void) * EBC Configuration Register: * set ready timeout to 512 ebc-clks -> ca. 15 us */ - mtebc (epcr, 0xa8400000); + mtebc (EBC0_CFG, 0xa8400000); /* * Setup GPIO pins */ - mtdcr(cntrl0, mfdcr(cntrl0) | ((CONFIG_SYS_FPGA_INIT | + mtdcr(CPC0_CR0, mfdcr(CPC0_CR0) | ((CONFIG_SYS_FPGA_INIT | CONFIG_SYS_FPGA_DONE | CONFIG_SYS_XEREADY | CONFIG_SYS_NONMONARCH | @@ -73,7 +73,7 @@ int board_early_init_f (void) if (!(in_be32((void *)GPIO0_IR) & CONFIG_SYS_REV1_2)) { /* rev 1.2 boards */ - mtdcr(cntrl0, mfdcr(cntrl0) | ((CONFIG_SYS_INTA_FAKE | + mtdcr(CPC0_CR0, mfdcr(CPC0_CR0) | ((CONFIG_SYS_INTA_FAKE | CONFIG_SYS_SELF_RST) << 5)); } diff --git a/board/esd/pmc405de/pmc405de.c b/board/esd/pmc405de/pmc405de.c index f68e1b5e8..419311aec 100644 --- a/board/esd/pmc405de/pmc405de.c +++ b/board/esd/pmc405de/pmc405de.c @@ -127,7 +127,7 @@ int board_early_init_f(void) * - set ready timeout to 512 ebc-clks -> ca. 15 us * - EBC lines are always driven */ - mtebc(epcr, 0xa8400000); + mtebc(EBC0_CFG, 0xa8400000); return 0; } diff --git a/board/esd/pmc440/pmc440.c b/board/esd/pmc440/pmc440.c index f22a1c288..119cbf262 100644 --- a/board/esd/pmc440/pmc440.c +++ b/board/esd/pmc440/pmc440.c @@ -64,7 +64,7 @@ struct serial_device *default_serial_console(void) * Use default console on P4 when strapping jumper * is installed (bootstrap option != 'H'). */ - mfsdr(SDR_PINSTP, val); + mfsdr(SDR0_PINSTP, val); if (((val & 0xf0000000) >> 29) != 7) return &serial1_device; @@ -100,8 +100,8 @@ int board_early_init_f(void) u32 reg; /* general EBC configuration (disable EBC timeouts) */ - mtdcr(ebccfga, xbcfg); - mtdcr(ebccfgd, 0xf8400000); + mtdcr(EBC0_CFGADDR, EBC0_CFG); + mtdcr(EBC0_CFGDATA, 0xf8400000); /* * Setup the GPIO pins @@ -134,13 +134,13 @@ int board_early_init_f(void) out_be32((void *)GPIO1_ISR3H, 0x00000000); /* patch PLB:PCI divider for 66MHz PCI */ - mfcpr(clk_spcid, reg); + mfcpr(CPR0_SPCID, reg); if (pci_is_66mhz() && (reg != 0x02000000)) { - mtcpr(clk_spcid, 0x02000000); /* 133MHZ : 2 for 66MHz PCI */ + mtcpr(CPR0_SPCID, 0x02000000); /* 133MHZ : 2 for 66MHz PCI */ - mfcpr(clk_icfg, reg); + mfcpr(CPR0_ICFG, reg); reg |= CPR0_ICFG_RLI_MASK; - mtcpr(clk_icfg, reg); + mtcpr(CPR0_ICFG, reg); mtspr(SPRN_DBCR0, 0x20000000); /* do chip reset */ } @@ -240,19 +240,19 @@ int misc_init_r(void) gd->bd->bi_flashoffset = 0; #if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) - mtdcr(ebccfga, pb2cr); + mtdcr(EBC0_CFGADDR, PB2CR); #else - mtdcr(ebccfga, pb0cr); + mtdcr(EBC0_CFGADDR, PB0CR); #endif - pbcr = mfdcr(ebccfgd); + pbcr = mfdcr(EBC0_CFGDATA); size_val = ffs(gd->bd->bi_flashsize) - 21; pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17); #if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) - mtdcr(ebccfga, pb2cr); + mtdcr(EBC0_CFGADDR, PB2CR); #else - mtdcr(ebccfga, pb0cr); + mtdcr(EBC0_CFGADDR, PB0CR); #endif - mtdcr(ebccfgd, pbcr); + mtdcr(EBC0_CFGDATA, pbcr); /* * Re-check to get correct base address @@ -424,8 +424,8 @@ int misc_init_r(void) * This fix will make the MAL burst disabling patch for the Linux * EMAC driver obsolete. */ - reg = mfdcr(plb4_acr) & ~PLB4_ACR_WRP; - mtdcr(plb4_acr, reg); + reg = mfdcr(PLB4_ACR) & ~PLB4_ACR_WRP; + mtdcr(PLB4_ACR, reg); #ifdef CONFIG_FPGA pmc440_init_fpga(); @@ -507,35 +507,35 @@ int pci_pre_init(struct pci_controller *hose) * Set priority for all PLB3 devices to 0. * Set PLB3 arbiter to fair mode. */ - mfsdr(sdr_amp1, addr); - mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00); - addr = mfdcr(plb3_acr); - mtdcr(plb3_acr, addr | 0x80000000); + mfsdr(SD0_AMP1, addr); + mtsdr(SD0_AMP1, (addr & 0x000000FF) | 0x0000FF00); + addr = mfdcr(PLB3_ACR); + mtdcr(PLB3_ACR, addr | 0x80000000); /* * Set priority for all PLB4 devices to 0. */ - mfsdr(sdr_amp0, addr); - mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00); - addr = mfdcr(plb4_acr) | 0xa0000000; /* Was 0x8---- */ - mtdcr(plb4_acr, addr); + mfsdr(SD0_AMP0, addr); + mtsdr(SD0_AMP0, (addr & 0x000000FF) | 0x0000FF00); + addr = mfdcr(PLB4_ACR) | 0xa0000000; /* Was 0x8---- */ + mtdcr(PLB4_ACR, addr); /* * Set Nebula PLB4 arbiter to fair mode. */ /* Segment0 */ - addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair; - addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled; - addr = (addr & ~plb0_acr_rdp_mask) | plb0_acr_rdp_4deep; - addr = (addr & ~plb0_acr_wrp_mask) | plb0_acr_wrp_2deep; - mtdcr(plb0_acr, addr); + addr = (mfdcr(PLB0_ACR) & ~PLB0_ACR_PPM_MASK) | PLB0_ACR_PPM_FAIR; + addr = (addr & ~PLB0_ACR_HBU_MASK) | PLB0_ACR_HBU_ENABLED; + addr = (addr & ~PLB0_ACR_RDP_MASK) | PLB0_ACR_RDP_4DEEP; + addr = (addr & ~PLB0_ACR_WRP_MASK) | PLB0_ACR_WRP_2DEEP; + mtdcr(PLB0_ACR, addr); /* Segment1 */ - addr = (mfdcr(plb1_acr) & ~plb1_acr_ppm_mask) | plb1_acr_ppm_fair; - addr = (addr & ~plb1_acr_hbu_mask) | plb1_acr_hbu_enabled; - addr = (addr & ~plb1_acr_rdp_mask) | plb1_acr_rdp_4deep; - addr = (addr & ~plb1_acr_wrp_mask) | plb1_acr_wrp_2deep; - mtdcr(plb1_acr, addr); + addr = (mfdcr(PLB1_ACR) & ~PLB1_ACR_PPM_MASK) | PLB1_ACR_PPM_FAIR; + addr = (addr & ~PLB1_ACR_HBU_MASK) | PLB1_ACR_HBU_ENABLED; + addr = (addr & ~PLB1_ACR_RDP_MASK) | PLB1_ACR_RDP_4DEEP; + addr = (addr & ~PLB1_ACR_WRP_MASK) | PLB1_ACR_WRP_2DEEP; + mtdcr(PLB1_ACR, addr); #ifdef CONFIG_PCI_PNP hose->fixup_irq = pmc440_pci_fixup_irq; diff --git a/board/esd/voh405/flash.c b/board/esd/voh405/flash.c index 274ada9fe..a53122b21 100644 --- a/board/esd/voh405/flash.c +++ b/board/esd/voh405/flash.c @@ -65,9 +65,9 @@ unsigned long flash_init (void) flash_get_offsets (-size_b0, &flash_info[0]); /* Re-do sizing to get full correct info */ - mtdcr(ebccfga, pb0cr); - pbcr = mfdcr(ebccfgd); - mtdcr(ebccfga, pb0cr); + mtdcr(EBC0_CFGADDR, PB0CR); + pbcr = mfdcr(EBC0_CFGDATA); + mtdcr(EBC0_CFGADDR, PB0CR); base_b0 = -size_b0; switch (size_b0) { case 1 << 20: @@ -87,7 +87,7 @@ unsigned long flash_init (void) break; } pbcr = (pbcr & 0x0001ffff) | base_b0 | (size_val << 17); - mtdcr(ebccfgd, pbcr); + mtdcr(EBC0_CFGDATA, pbcr); /* Monitor protection ON by default */ (void)flash_protect(FLAG_PROTECT_SET, diff --git a/board/esd/voh405/voh405.c b/board/esd/voh405/voh405.c index 91275507e..7477f56b2 100644 --- a/board/esd/voh405/voh405.c +++ b/board/esd/voh405/voh405.c @@ -99,7 +99,7 @@ int board_early_init_f (void) /* * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us */ - mtebc (epcr, 0xa8400000); /* ebc always driven */ + mtebc (EBC0_CFG, 0xa8400000); /* ebc always driven */ return 0; } diff --git a/board/esd/vom405/flash.c b/board/esd/vom405/flash.c index 274ada9fe..a53122b21 100644 --- a/board/esd/vom405/flash.c +++ b/board/esd/vom405/flash.c @@ -65,9 +65,9 @@ unsigned long flash_init (void) flash_get_offsets (-size_b0, &flash_info[0]); /* Re-do sizing to get full correct info */ - mtdcr(ebccfga, pb0cr); - pbcr = mfdcr(ebccfgd); - mtdcr(ebccfga, pb0cr); + mtdcr(EBC0_CFGADDR, PB0CR); + pbcr = mfdcr(EBC0_CFGDATA); + mtdcr(EBC0_CFGADDR, PB0CR); base_b0 = -size_b0; switch (size_b0) { case 1 << 20: @@ -87,7 +87,7 @@ unsigned long flash_init (void) break; } pbcr = (pbcr & 0x0001ffff) | base_b0 | (size_val << 17); - mtdcr(ebccfgd, pbcr); + mtdcr(EBC0_CFGDATA, pbcr); /* Monitor protection ON by default */ (void)flash_protect(FLAG_PROTECT_SET, diff --git a/board/esd/vom405/vom405.c b/board/esd/vom405/vom405.c index a481acaea..de9c7b974 100644 --- a/board/esd/vom405/vom405.c +++ b/board/esd/vom405/vom405.c @@ -56,7 +56,7 @@ int board_early_init_f (void) /* * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us */ - mtebc (epcr, 0xa8400000); /* ebc always driven */ + mtebc (EBC0_CFG, 0xa8400000); /* ebc always driven */ /* * Reset CPLD via GPIO12 (CS3) pin diff --git a/board/esd/wuh405/flash.c b/board/esd/wuh405/flash.c index 274ada9fe..a53122b21 100644 --- a/board/esd/wuh405/flash.c +++ b/board/esd/wuh405/flash.c @@ -65,9 +65,9 @@ unsigned long flash_init (void) flash_get_offsets (-size_b0, &flash_info[0]); /* Re-do sizing to get full correct info */ - mtdcr(ebccfga, pb0cr); - pbcr = mfdcr(ebccfgd); - mtdcr(ebccfga, pb0cr); + mtdcr(EBC0_CFGADDR, PB0CR); + pbcr = mfdcr(EBC0_CFGDATA); + mtdcr(EBC0_CFGADDR, PB0CR); base_b0 = -size_b0; switch (size_b0) { case 1 << 20: @@ -87,7 +87,7 @@ unsigned long flash_init (void) break; } pbcr = (pbcr & 0x0001ffff) | base_b0 | (size_val << 17); - mtdcr(ebccfgd, pbcr); + mtdcr(EBC0_CFGDATA, pbcr); /* Monitor protection ON by default */ (void)flash_protect(FLAG_PROTECT_SET, diff --git a/board/esd/wuh405/wuh405.c b/board/esd/wuh405/wuh405.c index e330fff16..e86f1d0ab 100644 --- a/board/esd/wuh405/wuh405.c +++ b/board/esd/wuh405/wuh405.c @@ -75,7 +75,7 @@ int board_early_init_f (void) /* * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us */ - mtebc (epcr, 0xa8400000); /* ebc always driven */ + mtebc (EBC0_CFG, 0xa8400000); /* ebc always driven */ return 0; } diff --git a/board/exbitgen/exbitgen.c b/board/exbitgen/exbitgen.c index dc07d3df0..0f8412776 100644 --- a/board/exbitgen/exbitgen.c +++ b/board/exbitgen/exbitgen.c @@ -94,29 +94,29 @@ phys_size_t initdram (int board_type) tot_size = 0; - mtdcr (memcfga, mem_mb0cf); - tmp = mfdcr (memcfgd); + mtdcr (SDRAM0_CFGADDR, mem_mb0cf); + tmp = mfdcr (SDRAM0_CFGDATA); if (tmp & 0x00000001) { bank_size = 0x00400000 << ((tmp >> 17) & 0x7); tot_size += bank_size; } - mtdcr (memcfga, mem_mb1cf); - tmp = mfdcr (memcfgd); + mtdcr (SDRAM0_CFGADDR, mem_mb1cf); + tmp = mfdcr (SDRAM0_CFGDATA); if (tmp & 0x00000001) { bank_size = 0x00400000 << ((tmp >> 17) & 0x7); tot_size += bank_size; } - mtdcr (memcfga, mem_mb2cf); - tmp = mfdcr (memcfgd); + mtdcr (SDRAM0_CFGADDR, mem_mb2cf); + tmp = mfdcr (SDRAM0_CFGDATA); if (tmp & 0x00000001) { bank_size = 0x00400000 << ((tmp >> 17) & 0x7); tot_size += bank_size; } - mtdcr (memcfga, mem_mb3cf); - tmp = mfdcr (memcfgd); + mtdcr (SDRAM0_CFGADDR, mem_mb3cf); + tmp = mfdcr (SDRAM0_CFGDATA); if (tmp & 0x00000001) { bank_size = 0x00400000 << ((tmp >> 17) & 0x7); tot_size += bank_size; diff --git a/board/exbitgen/init.S b/board/exbitgen/init.S index cb5487461..c2dae560f 100644 --- a/board/exbitgen/init.S +++ b/board/exbitgen/init.S @@ -109,10 +109,10 @@ #define WDCR_EBC(reg,val) addi r4,0,reg;\ - mtdcr ebccfga,r4;\ + mtdcr EBC0_CFGADDR,r4;\ addis r4,0,val@h;\ ori r4,r4,val@l;\ - mtdcr ebccfgd,r4 + mtdcr EBC0_CFGDATA,r4 /*--------------------------------------------------------------------- * Function: ext_bus_cntlr_init @@ -164,22 +164,22 @@ ext_bus_cntlr_init: * Memory Bank 0 (Boot Flash) initialization *--------------------------------------------------------------- */ - WDCR_EBC(pb0ap, FLASH_32bit_AP) - WDCR_EBC(pb0cr, 0xffe38000) -/*pnc WDCR_EBC(pb0cr, FLASH_32bit_CR) */ + WDCR_EBC(PB1AP, FLASH_32bit_AP) + WDCR_EBC(PB0CR, 0xffe38000) +/*pnc WDCR_EBC(PB0CR, FLASH_32bit_CR) */ /*--------------------------------------------------------------- * Memory Bank 5 (CPLD) initialization *--------------------------------------------------------------- */ - WDCR_EBC(pb5ap, 0x01010040) -/*jsa recommendation: WDCR_EBC(pb5ap, 0x00010040) */ - WDCR_EBC(pb5cr, 0x10038000) + WDCR_EBC(PB5AP, 0x01010040) +/*jsa recommendation: WDCR_EBC(PB5AP, 0x00010040) */ + WDCR_EBC(PB5CR, 0x10038000) /*--------------------------------------------------------------- */ /* Memory Bank 6 (not used) initialization */ /*--------------------------------------------------------------- */ - WDCR_EBC(pb6cr, 0x00000000) + WDCR_EBC(PB6CR, 0x00000000) /* Read HW ID to determine whether old H2 board or new generic CPU board */ addis r3, 0, HW_ID_ADDR@h @@ -196,24 +196,24 @@ setup_genieboard: /*--------------------------------------------------------------- */ /* Memory Bank 1 (Application Flash) initialization for generic CPU board */ /*--------------------------------------------------------------- */ -/* WDCR_EBC(pb1ap, 0x7b015480) /###* T.B.M. */ -/* WDCR_EBC(pb1ap, 0x7F8FFE80) /###* T.B.M. */ - WDCR_EBC(pb1ap, 0x9b015480) /* hlb-20020207: burst 8 bit 6 cycles */ +/* WDCR_EBC(PB1AP, 0x7b015480) /###* T.B.M. */ +/* WDCR_EBC(PB1AP, 0x7F8FFE80) /###* T.B.M. */ + WDCR_EBC(PB1AP, 0x9b015480) /* hlb-20020207: burst 8 bit 6 cycles */ -/* WDCR_EBC(pb1cr, 0x20098000) /###* 16 MB */ - WDCR_EBC(pb1cr, 0x200B8000) /* 32 MB */ +/* WDCR_EBC(PB1CR, 0x20098000) /###* 16 MB */ + WDCR_EBC(PB1CR, 0x200B8000) /* 32 MB */ /*--------------------------------------------------------------- */ /* Memory Bank 4 (Onboard FPGA) initialization for generic CPU board */ /*--------------------------------------------------------------- */ - WDCR_EBC(pb4ap, 0x01010000) /* */ - WDCR_EBC(pb4cr, 0x1021c000) /* */ + WDCR_EBC(PB4AP, 0x01010000) /* */ + WDCR_EBC(PB4CR, 0x1021c000) /* */ /*--------------------------------------------------------------- */ /* Memory Bank 7 (Heathrow chip on Reference board) initialization */ /*--------------------------------------------------------------- */ - WDCR_EBC(pb7ap, 0x200ffe80) /* No Ready, many wait states (let reflections die out) */ - WDCR_EBC(pb7cr, 0X4001A000) + WDCR_EBC(PB7AP, 0x200ffe80) /* No Ready, many wait states (let reflections die out) */ + WDCR_EBC(PB7CR, 0X4001A000) bl setup_continue @@ -222,36 +222,36 @@ setup_h2evalboard: /*--------------------------------------------------------------- */ /* Memory Bank 1 (Application Flash) initialization */ /*--------------------------------------------------------------- */ - WDCR_EBC(pb1ap, 0x7b015480) /* T.B.M. */ -/*3010 WDCR_EBC(pb1ap, 0x7F8FFE80) /###* T.B.M. */ - WDCR_EBC(pb1cr, 0x20058000) + WDCR_EBC(PB1AP, 0x7b015480) /* T.B.M. */ +/*3010 WDCR_EBC(PB1AP, 0x7F8FFE80) /###* T.B.M. */ + WDCR_EBC(PB1CR, 0x20058000) /*--------------------------------------------------------------- */ /* Memory Bank 2 (Application Flash) initialization */ /*--------------------------------------------------------------- */ - WDCR_EBC(pb2ap, 0x7b015480) /* T.B.M. */ -/*3010 WDCR_EBC(pb2ap, 0x7F8FFE80) /###* T.B.M. */ - WDCR_EBC(pb2cr, 0x20458000) + WDCR_EBC(PB2AP, 0x7b015480) /* T.B.M. */ +/*3010 WDCR_EBC(PB2AP, 0x7F8FFE80) /###* T.B.M. */ + WDCR_EBC(PB2CR, 0x20458000) /*--------------------------------------------------------------- */ /* Memory Bank 3 (Application Flash) initialization */ /*--------------------------------------------------------------- */ - WDCR_EBC(pb3ap, 0x7b015480) /* T.B.M. */ -/*3010 WDCR_EBC(pb3ap, 0x7F8FFE80) /###* T.B.M. */ - WDCR_EBC(pb3cr, 0x20858000) + WDCR_EBC(PB3AP, 0x7b015480) /* T.B.M. */ +/*3010 WDCR_EBC(PB3AP, 0x7F8FFE80) /###* T.B.M. */ + WDCR_EBC(PB3CR, 0x20858000) /*--------------------------------------------------------------- */ /* Memory Bank 4 (Application Flash) initialization */ /*--------------------------------------------------------------- */ - WDCR_EBC(pb4ap, 0x7b015480) /* T.B.M. */ -/*3010 WDCR_EBC(pb4ap, 0x7F8FFE80) /###* T.B.M. */ - WDCR_EBC(pb4cr, 0x20C58000) + WDCR_EBC(PB4AP, 0x7b015480) /* T.B.M. */ +/*3010 WDCR_EBC(PB4AP, 0x7F8FFE80) /###* T.B.M. */ + WDCR_EBC(PB4CR, 0x20C58000) /*--------------------------------------------------------------- */ /* Memory Bank 7 (Heathrow chip) initialization */ /*--------------------------------------------------------------- */ - WDCR_EBC(pb7ap, 0x02000280) /* No Ready, 4 wait states */ - WDCR_EBC(pb7cr, 0X4001A000) + WDCR_EBC(PB7AP, 0x02000280) /* No Ready, 4 wait states */ + WDCR_EBC(PB7CR, 0X4001A000) setup_continue: @@ -294,7 +294,7 @@ sdram_init: /* Read PLL feedback divider and calculate clock period of local bus in */ /* granularity of 10 ps. Save clock period in r30 */ /*-------------------------------------------------------------- */ - mfdcr r4, pllmd + mfdcr r4, CPC0_PLLMR addi r9, 0, 25 srw r4, r4, r9 andi. r4, r4, 0x07 @@ -383,8 +383,8 @@ sdram_init: /* Set SDTR1 */ /*----------------------------------------------------------- */ addi r5,0,mem_sdtr1 - mtdcr memcfga,r5 - mtdcr memcfgd,r4 + mtdcr SDRAM0_CFGADDR,r5 + mtdcr SDRAM0_CFGDATA,r4 /*----------------------------------------------------------- */ /* */ @@ -414,8 +414,8 @@ sdram_init: /* Set SDRAM bank 0 register and adjust r6 for next bank */ /*------------------------------------------------------ */ addi r7,0,mem_mb0cf - mtdcr memcfga,r7 - mtdcr memcfgd,r6 + mtdcr SDRAM0_CFGADDR,r7 + mtdcr SDRAM0_CFGDATA,r6 add r6, r6, r15 /* add bank size to base address for next bank */ @@ -425,16 +425,16 @@ sdram_init: bne b1skip addi r7,0,mem_mb1cf - mtdcr memcfga,r7 - mtdcr memcfgd,r6 + mtdcr SDRAM0_CFGADDR,r7 + mtdcr SDRAM0_CFGDATA,r6 add r6, r6, r15 /* add bank size to base address for next bank */ /* Set SDRAM bank 2 register and adjust r6 for next bank */ /*------------------------------------------------------ */ b1skip: addi r7,0,mem_mb2cf - mtdcr memcfga,r7 - mtdcr memcfgd,r6 + mtdcr SDRAM0_CFGADDR,r7 + mtdcr SDRAM0_CFGDATA,r6 add r6, r6, r15 /* add bank size to base address for next bank */ @@ -444,8 +444,8 @@ b1skip: addi r7,0,mem_mb2cf bne b3skip addi r7,0,mem_mb3cf - mtdcr memcfga,r7 - mtdcr memcfgd,r6 + mtdcr SDRAM0_CFGADDR,r7 + mtdcr SDRAM0_CFGDATA,r6 b3skip: /*----------------------------------------------------------- */ @@ -457,8 +457,8 @@ b3skip: bl rtr_2 rtr_1: addis r7, 0, 0x03F8 rtr_2: addi r4,0,mem_rtr - mtdcr memcfga,r4 - mtdcr memcfgd,r7 + mtdcr SDRAM0_CFGADDR,r4 + mtdcr SDRAM0_CFGDATA,r7 /*----------------------------------------------------------- */ /* Delay to ensure 200usec have elapsed since reset. Assume worst */ @@ -477,10 +477,10 @@ rtr_2: addi r4,0,mem_rtr /* read/prefetch. */ /*----------------------------------------------------------- */ addi r4,0,mem_mcopt1 - mtdcr memcfga,r4 + mtdcr SDRAM0_CFGADDR,r4 addis r4,0,0x80C0 /* set DC_EN=1 */ ori r4,r4,0x0000 - mtdcr memcfgd,r4 + mtdcr SDRAM0_CFGDATA,r4 /*----------------------------------------------------------- */ @@ -980,9 +980,9 @@ fc07: /* For CPLD */ /* 0 + 00000 + 010 + 000 + 00 + 01 + 00 + 00 + 000 + 0 + 0 + 1 + 0 + 00000 */ -/* WDCR_EBC(pb5ap, 0x01010040) */ -/*jsa recommendation: WDCR_EBC(pb5ap, 0x00010040) */ -/* WDCR_EBC(pb5cr, 0X10018000) */ +/* WDCR_EBC(PB5AP, 0x01010040) */ +/*jsa recommendation: WDCR_EBC(PB5AP, 0x00010040) */ +/* WDCR_EBC(PB5CR, 0X10018000) */ /* Access parms */ /* 100 3 8 0 0 0 */ /* 0x100 + 001 + 11 + 00 + 0 0000 0000 0000 = 0x10038000 */ @@ -1003,9 +1003,9 @@ fc07: /* Usage: read/write */ /* Width: 32 bit */ -/* Walnut fpga pb7ap */ +/* Walnut fpga PB7AP */ /* 0 1 8 1 5 2 8 0 */ /* 0 + 00000 + 011 + 000 + 00 + 01 + 01 + 01 + 001 + 0 + 1 + 0 + 0 + 00000 */ -/* Walnut fpga pb7cr */ +/* Walnut fpga PB7CR */ /* 0xF0318000 */ /* */ diff --git a/board/freescale/mpc8313erdb/mpc8313erdb.c b/board/freescale/mpc8313erdb/mpc8313erdb.c index 9ffd4bff8..e5f62ae96 100644 --- a/board/freescale/mpc8313erdb/mpc8313erdb.c +++ b/board/freescale/mpc8313erdb/mpc8313erdb.c @@ -140,7 +140,7 @@ void board_init_f(ulong bootflag) puts("NAND boot... "); init_timebase(); initdram(0); - relocate_code(CONFIG_SYS_NAND_U_BOOT_RELOC + 0x10000, (gd_t *)gd, + relocate_code(CONFIG_SYS_NAND_U_BOOT_RELOC_SP, (gd_t *)gd, CONFIG_SYS_NAND_U_BOOT_RELOC); } diff --git a/board/g2000/g2000.c b/board/g2000/g2000.c index f6f47197c..ae258e1f2 100644 --- a/board/g2000/g2000.c +++ b/board/g2000/g2000.c @@ -58,7 +58,7 @@ int board_early_init_f (void) /* * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us */ - mtebc (epcr, 0xa8400000); /* ebc always driven */ + mtebc (EBC0_CFG, 0xa8400000); /* ebc always driven */ #endif return 0; @@ -114,7 +114,7 @@ int checkboard (void) long int init_sdram_static_settings(void) { -#define mtsdram0(reg, data) mtdcr(memcfga,reg);mtdcr(memcfgd,data) +#define mtsdram0(reg, data) mtdcr(SDRAM0_CFGADDR,reg);mtdcr(SDRAM0_CFGDATA,data) /* disable memcontroller so updates work */ mtsdram0( mem_mcopt1, MEM_MCOPT1_INIT_VAL ); mtsdram0( mem_rtr , MEM_RTR_INIT_VAL ); @@ -154,15 +154,15 @@ int do_dumpebc(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) ulong ap, cr; printf("\nEBC registers for PPC405GP:\n"); - mfebc(pb0ap, ap); mfebc(pb0cr, cr); + mfebc(PB0AP, ap); mfebc(PB0CR, cr); printf("0: AP=%08lx CP=%08lx\n", ap, cr); - mfebc(pb1ap, ap); mfebc(pb1cr, cr); + mfebc(PB1AP, ap); mfebc(PB1CR, cr); printf("1: AP=%08lx CP=%08lx\n", ap, cr); - mfebc(pb2ap, ap); mfebc(pb2cr, cr); + mfebc(PB2AP, ap); mfebc(PB2CR, cr); printf("2: AP=%08lx CP=%08lx\n", ap, cr); - mfebc(pb3ap, ap); mfebc(pb3cr, cr); + mfebc(PB3AP, ap); mfebc(PB3CR, cr); printf("3: AP=%08lx CP=%08lx\n", ap, cr); - mfebc(pb4ap, ap); mfebc(pb4cr, cr); + mfebc(PB4AP, ap); mfebc(PB4CR, cr); printf("4: AP=%08lx CP=%08lx\n", ap, cr); printf("\n"); diff --git a/board/gdsys/dlvision/dlvision.c b/board/gdsys/dlvision/dlvision.c index 4ec1cdbc3..5246bc8c4 100644 --- a/board/gdsys/dlvision/dlvision.c +++ b/board/gdsys/dlvision/dlvision.c @@ -48,7 +48,7 @@ int board_early_init_f(void) * EBC Configuration Register: set ready timeout to 512 ebc-clks * -> ca. 15 us */ - mtebc(epcr, 0xa8400000); /* ebc always driven */ + mtebc(EBC0_CFG, 0xa8400000); /* ebc always driven */ /* * setup io-latches diff --git a/board/gdsys/gdppc440etx/gdppc440etx.c b/board/gdsys/gdppc440etx/gdppc440etx.c index a66105743..27c159bec 100644 --- a/board/gdsys/gdppc440etx/gdppc440etx.c +++ b/board/gdsys/gdppc440etx/gdppc440etx.c @@ -42,8 +42,8 @@ int board_early_init_f(void) /* * Setup the external bus controller/chip selects */ - mfebc(xbcfg, reg); - mtebc(xbcfg, reg | 0x04000000); /* Set ATC */ + mfebc(EBC0_CFG, reg); + mtebc(EBC0_CFG, reg | 0x04000000); /* Set ATC */ /* * Setup the GPIO pins @@ -102,10 +102,10 @@ int board_early_init_f(void) /* * Setup other serial configuration */ - mfsdr(sdr_pci0, reg); - mtsdr(sdr_pci0, 0x80000000 | reg); /* PCI arbiter enabled */ - mtsdr(sdr_pfc0, 0x00003e00); /* Pin function */ - mtsdr(sdr_pfc1, 0x00048000); /* Pin function: UART0 has 4 pins */ + mfsdr(SDR0_PCI0, reg); + mtsdr(SDR0_PCI0, 0x80000000 | reg); /* PCI arbiter enabled */ + mtsdr(SDR0_PFC0, 0x00003e00); /* Pin function */ + mtsdr(SDR0_PFC1, 0x00048000); /* Pin function: UART0 has 4 pins */ return 0; } @@ -117,7 +117,7 @@ int misc_init_r(void) uint sz; /* Re-do sizing to get full correct info */ - mfebc(pb0cr, pbcr); + mfebc(PB0CR, pbcr); if (gd->bd->bi_flashsize > 0x08000000) panic("Max. flash banksize is 128 MB!\n"); @@ -127,7 +127,7 @@ int misc_init_r(void) sz <<= 1; pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17); - mtebc(pb0cr, pbcr); + mtebc(PB0CR, pbcr); /* adjust flash start and offset */ gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize; @@ -178,35 +178,35 @@ int pci_pre_init(struct pci_controller *hose) * Set priority for all PLB3 devices to 0. * Set PLB3 arbiter to fair mode. */ - mfsdr(sdr_amp1, addr); - mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00); - addr = mfdcr(plb3_acr); - mtdcr(plb3_acr, addr | 0x80000000); + mfsdr(SD0_AMP1, addr); + mtsdr(SD0_AMP1, (addr & 0x000000FF) | 0x0000FF00); + addr = mfdcr(PLB3_ACR); + mtdcr(PLB3_ACR, addr | 0x80000000); /* * Set priority for all PLB4 devices to 0. */ - mfsdr(sdr_amp0, addr); - mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00); - addr = mfdcr(plb4_acr) | 0xa0000000; /* Was 0x8---- */ - mtdcr(plb4_acr, addr); + mfsdr(SD0_AMP0, addr); + mtsdr(SD0_AMP0, (addr & 0x000000FF) | 0x0000FF00); + addr = mfdcr(PLB4_ACR) | 0xa0000000; /* Was 0x8---- */ + mtdcr(PLB4_ACR, addr); /* * Set Nebula PLB4 arbiter to fair mode. */ /* Segment0 */ - addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair; - addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled; - addr = (addr & ~plb0_acr_rdp_mask) | plb0_acr_rdp_4deep; - addr = (addr & ~plb0_acr_wrp_mask) | plb0_acr_wrp_2deep; - mtdcr(plb0_acr, addr); + addr = (mfdcr(PLB0_ACR) & ~PLB0_ACR_PPM_MASK) | PLB0_ACR_PPM_FAIR; + addr = (addr & ~PLB0_ACR_HBU_MASK) | PLB0_ACR_HBU_ENABLED; + addr = (addr & ~PLB0_ACR_RDP_MASK) | PLB0_ACR_RDP_4DEEP; + addr = (addr & ~PLB0_ACR_WRP_MASK) | PLB0_ACR_WRP_2DEEP; + mtdcr(PLB0_ACR, addr); /* Segment1 */ - addr = (mfdcr(plb1_acr) & ~plb1_acr_ppm_mask) | plb1_acr_ppm_fair; - addr = (addr & ~plb1_acr_hbu_mask) | plb1_acr_hbu_enabled; - addr = (addr & ~plb1_acr_rdp_mask) | plb1_acr_rdp_4deep; - addr = (addr & ~plb1_acr_wrp_mask) | plb1_acr_wrp_2deep; - mtdcr(plb1_acr, addr); + addr = (mfdcr(PLB1_ACR) & ~PLB1_ACR_PPM_MASK) | PLB1_ACR_PPM_FAIR; + addr = (addr & ~PLB1_ACR_HBU_MASK) | PLB1_ACR_HBU_ENABLED; + addr = (addr & ~PLB1_ACR_RDP_MASK) | PLB1_ACR_RDP_4DEEP; + addr = (addr & ~PLB1_ACR_WRP_MASK) | PLB1_ACR_WRP_2DEEP; + mtdcr(PLB1_ACR, addr); /* enable 66 MHz ext. Clock */ out32(GPIO1_TCR, in32(GPIO1_TCR) | 0x00008000); diff --git a/board/gdsys/compactcenter/Makefile b/board/gdsys/intip/Makefile index 12f8a642e..12f8a642e 100644 --- a/board/gdsys/compactcenter/Makefile +++ b/board/gdsys/intip/Makefile diff --git a/board/gdsys/compactcenter/chip_config.c b/board/gdsys/intip/chip_config.c index e46f4d8ec..e46f4d8ec 100644 --- a/board/gdsys/compactcenter/chip_config.c +++ b/board/gdsys/intip/chip_config.c diff --git a/board/gdsys/compactcenter/config.mk b/board/gdsys/intip/config.mk index 56e397d77..56e397d77 100644 --- a/board/gdsys/compactcenter/config.mk +++ b/board/gdsys/intip/config.mk diff --git a/board/gdsys/compactcenter/init.S b/board/gdsys/intip/init.S index e205c9d7e..e205c9d7e 100644 --- a/board/gdsys/compactcenter/init.S +++ b/board/gdsys/intip/init.S diff --git a/board/gdsys/compactcenter/compactcenter.c b/board/gdsys/intip/intip.c index f448ef937..0de1be857 100644 --- a/board/gdsys/compactcenter/compactcenter.c +++ b/board/gdsys/intip/intip.c @@ -129,7 +129,7 @@ int checkboard(void) #ifdef CONFIG_DEVCONCENTER printf("Board: DevCon-Center"); #else - printf("Board: CompactCenter"); + printf("Board: Intip"); #endif if (s != NULL) { @@ -215,7 +215,7 @@ int board_early_init_r(void) EBC_BXCR_BS_128MB : EBC_BXCR_BS_64MB; /* Remap the NOR FLASH to 0xcn00.0000 ... 0xcfff.ffff */ - mtebc(pb0cr, CONFIG_SYS_FLASH_BASE_PHYS_L + mtebc(PB0CR, CONFIG_SYS_FLASH_BASE_PHYS_L | bxcr_bw | EBC_BXCR_BU_RW | EBC_BXCR_BW_16BIT); diff --git a/board/gdsys/compactcenter/u-boot.lds b/board/gdsys/intip/u-boot.lds index 0c95d5c29..c1cbd1c4a 100644 --- a/board/gdsys/compactcenter/u-boot.lds +++ b/board/gdsys/intip/u-boot.lds @@ -66,7 +66,7 @@ SECTIONS /* the sector layout of our flash chips! XXX FIXME XXX */ cpu/ppc4xx/start.o (.text) - board/gdsys/compactcenter/init.o (.text) + board/gdsys/intip/init.o (.text) *(.text) *(.fixup) diff --git a/board/gdsys/neo/neo.c b/board/gdsys/neo/neo.c index 817ce17ff..628ce3dc9 100644 --- a/board/gdsys/neo/neo.c +++ b/board/gdsys/neo/neo.c @@ -43,7 +43,7 @@ int board_early_init_f(void) * EBC Configuration Register: set ready timeout to 512 ebc-clks * -> ca. 15 us */ - mtebc(epcr, 0xa8400000); /* ebc always driven */ + mtebc(EBC0_CFG, 0xa8400000); /* ebc always driven */ return 0; } diff --git a/board/jse/init.S b/board/jse/init.S index 7b932b25f..92f43f4fc 100644 --- a/board/jse/init.S +++ b/board/jse/init.S @@ -52,8 +52,6 @@ #include <asm/cache.h> #include <asm/mmu.h> -#define cpc0_cr0 0xB1 - .globl ext_bus_cntlr_init ext_bus_cntlr_init: mflr r4 /* save link register */ @@ -84,16 +82,16 @@ ext_bus_cntlr_init: /* Memory Bank 0 (Flash) initialization */ /*----------------------------------------------------------------- */ - addi r4,0,pb0ap - mtdcr ebccfga,r4 + addi r4,0,PB1AP + mtdcr EBC0_CFGADDR,r4 addis r4,0,0x9B01 ori r4,r4,0x5480 - mtdcr ebccfgd,r4 + mtdcr EBC0_CFGDATA,r4 - addi r4,0,pb0cr - mtdcr ebccfga,r4 + addi r4,0,PB0CR + mtdcr EBC0_CFGADDR,r4 addis r4,0,0xFFF1 /* BAS=0xFFF,BS=0x0(1MB),BU=0x3(R/W), */ ori r4,r4,0x8000 /* BW=0x0( 8 bits) */ - mtdcr ebccfgd,r4 + mtdcr EBC0_CFGDATA,r4 blr diff --git a/board/jse/jse.c b/board/jse/jse.c index 6a6b9dd74..6dc9a01af 100644 --- a/board/jse/jse.c +++ b/board/jse/jse.c @@ -62,12 +62,12 @@ int board_early_init_f (void) /* EBC0_B1AP: BME=1, TWT=2, CSN=0, OEN=1, WBN=0, WBF=1, TH=0, RE=0, SOR=0, BEM=0, PEN=0 */ - mtdcr (ebccfga, pb1ap); - mtdcr (ebccfgd, 0x01011000); + mtdcr (EBC0_CFGADDR, PB1AP); + mtdcr (EBC0_CFGDATA, 0x01011000); /* EBC0_B1CR: BAS=x, BS=0(1MB), BU=3(R/W), BW=0(8bits) */ - mtdcr (ebccfga, pb1cr); - mtdcr (ebccfgd, CONFIG_SYS_SYSTEMACE_BASE | 0x00018000); + mtdcr (EBC0_CFGADDR, PB1CR); + mtdcr (EBC0_CFGDATA, CONFIG_SYS_SYSTEMACE_BASE | 0x00018000); /* Enable the /PerWE output as /PerWE, instead of /PCIINT. */ /* CPC0_CR1 |= PCIPW */ diff --git a/board/jse/sdram.c b/board/jse/sdram.c index a1f526de6..bb6f85eee 100644 --- a/board/jse/sdram.c +++ b/board/jse/sdram.c @@ -35,60 +35,60 @@ phys_size_t initdram (int board_type) /* Configure the SDRAMS */ /* disable memory controller */ - mtdcr (memcfga, mem_mcopt1); - mtdcr (memcfgd, 0x00000000); + mtdcr (SDRAM0_CFGADDR, mem_mcopt1); + mtdcr (SDRAM0_CFGDATA, 0x00000000); udelay (500); /* Clear SDRAM0_BESR0 (Bus Error Syndrome Register) */ - mtdcr (memcfga, mem_besra); - mtdcr (memcfgd, 0xffffffff); + mtdcr (SDRAM0_CFGADDR, mem_besra); + mtdcr (SDRAM0_CFGDATA, 0xffffffff); /* Clear SDRAM0_BESR1 (Bus Error Syndrome Register) */ - mtdcr (memcfga, mem_besrb); - mtdcr (memcfgd, 0xffffffff); + mtdcr (SDRAM0_CFGADDR, mem_besrb); + mtdcr (SDRAM0_CFGDATA, 0xffffffff); /* Clear SDRAM0_ECCCFG (disable ECC) */ - mtdcr (memcfga, mem_ecccf); - mtdcr (memcfgd, 0x00000000); + mtdcr (SDRAM0_CFGADDR, mem_ecccf); + mtdcr (SDRAM0_CFGDATA, 0x00000000); /* Clear SDRAM0_ECCESR (ECC Error Syndrome Register) */ - mtdcr (memcfga, mem_eccerr); - mtdcr (memcfgd, 0xffffffff); + mtdcr (SDRAM0_CFGADDR, mem_eccerr); + mtdcr (SDRAM0_CFGDATA, 0xffffffff); /* Timing register: CASL=2, PTA=2, CTP=2, LDF=1, RFTA=5, RCD=2 */ - mtdcr (memcfga, mem_sdtr1); - mtdcr (memcfgd, 0x010a4016); + mtdcr (SDRAM0_CFGADDR, mem_sdtr1); + mtdcr (SDRAM0_CFGDATA, 0x010a4016); /* Memory Bank 0 Config == BA=0x00000000, SZ=64M, AM=3, BE=1 */ - mtdcr (memcfga, mem_mb0cf); - mtdcr (memcfgd, 0x00084001); + mtdcr (SDRAM0_CFGADDR, mem_mb0cf); + mtdcr (SDRAM0_CFGDATA, 0x00084001); /* Memory Bank 1 Config == BA=0x04000000, SZ=64M, AM=3, BE=1 */ - mtdcr (memcfga, mem_mb1cf); - mtdcr (memcfgd, 0x04084001); + mtdcr (SDRAM0_CFGADDR, mem_mb1cf); + mtdcr (SDRAM0_CFGDATA, 0x04084001); /* Memory Bank 2 Config == BE=0 */ - mtdcr (memcfga, mem_mb2cf); - mtdcr (memcfgd, 0x00000000); + mtdcr (SDRAM0_CFGADDR, mem_mb2cf); + mtdcr (SDRAM0_CFGDATA, 0x00000000); /* Memory Bank 3 Config == BE=0 */ - mtdcr (memcfga, mem_mb3cf); - mtdcr (memcfgd, 0x00000000); + mtdcr (SDRAM0_CFGADDR, mem_mb3cf); + mtdcr (SDRAM0_CFGDATA, 0x00000000); /* refresh timer = 0x400 */ - mtdcr (memcfga, mem_rtr); - mtdcr (memcfgd, 0x04000000); + mtdcr (SDRAM0_CFGADDR, mem_rtr); + mtdcr (SDRAM0_CFGDATA, 0x04000000); /* Power management idle timer set to the default. */ - mtdcr (memcfga, mem_pmit); - mtdcr (memcfgd, 0x07c00000); + mtdcr (SDRAM0_CFGADDR, mem_pmit); + mtdcr (SDRAM0_CFGDATA, 0x07c00000); udelay (500); /* Enable banks (DCE=1, BPRF=1, ECCDD=1, EMDUL=1) */ - mtdcr (memcfga, mem_mcopt1); - mtdcr (memcfgd, 0x80e00000); + mtdcr (SDRAM0_CFGADDR, mem_mcopt1); + mtdcr (SDRAM0_CFGDATA, 0x80e00000); return SDRAM_LEN; } @@ -108,28 +108,28 @@ int testdram (void) #ifdef DEBUG printf ("SDRAM Controller Registers --\n"); - mtdcr (memcfga, mem_mcopt1); - val = mfdcr (memcfgd); + mtdcr (SDRAM0_CFGADDR, mem_mcopt1); + val = mfdcr (SDRAM0_CFGDATA); printf (" SDRAM0_CFG : 0x%08x\n", val); - mtdcr (memcfga, 0x24); - val = mfdcr (memcfgd); + mtdcr (SDRAM0_CFGADDR, 0x24); + val = mfdcr (SDRAM0_CFGDATA); printf (" SDRAM0_STATUS: 0x%08x\n", val); - mtdcr (memcfga, mem_mb0cf); - val = mfdcr (memcfgd); + mtdcr (SDRAM0_CFGADDR, mem_mb0cf); + val = mfdcr (SDRAM0_CFGDATA); printf (" SDRAM0_B0CR : 0x%08x\n", val); - mtdcr (memcfga, mem_mb1cf); - val = mfdcr (memcfgd); + mtdcr (SDRAM0_CFGADDR, mem_mb1cf); + val = mfdcr (SDRAM0_CFGDATA); printf (" SDRAM0_B1CR : 0x%08x\n", val); - mtdcr (memcfga, mem_sdtr1); - val = mfdcr (memcfgd); + mtdcr (SDRAM0_CFGADDR, mem_sdtr1); + val = mfdcr (SDRAM0_CFGDATA); printf (" SDRAM0_TR : 0x%08x\n", val); - mtdcr (memcfga, mem_rtr); - val = mfdcr (memcfgd); + mtdcr (SDRAM0_CFGADDR, mem_rtr); + val = mfdcr (SDRAM0_CFGDATA); printf (" SDRAM0_RTR : 0x%08x\n", val); #endif @@ -137,8 +137,8 @@ int testdram (void) bit. Really, there should already have been plenty of time, given it was started long ago. But, best to check. */ for (idx = 0; idx < 1000000; idx += 1) { - mtdcr (memcfga, 0x24); - val = mfdcr (memcfgd); + mtdcr (SDRAM0_CFGADDR, 0x24); + val = mfdcr (SDRAM0_CFGDATA); if (val & 0x80000000) break; } diff --git a/board/keymile/mgcoge/mgcoge.c b/board/keymile/mgcoge/mgcoge.c index d24a4b576..b16a01ccc 100644 --- a/board/keymile/mgcoge/mgcoge.c +++ b/board/keymile/mgcoge/mgcoge.c @@ -25,7 +25,6 @@ #include <mpc8260.h> #include <ioports.h> #include <malloc.h> -#include <net.h> #include <asm/io.h> #if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) @@ -373,10 +372,6 @@ void ft_blob_update (void *blob, bd_t *bd) flash_reg[5] = cpu_to_be32 (info->size); fdt_set_node_and_value (blob, "/localbus/flash@5,0", "reg", flash_reg, sizeof (flash_reg)); - - /* MAC addr */ - fdt_set_node_and_value (blob, "/soc/cpm/ethernet", "mac-address", - bd->bi_enetaddr, sizeof (u8) * 6); } void ft_board_setup (void *blob, bd_t *bd) diff --git a/board/korat/korat.c b/board/korat/korat.c index 8328ba326..3d4d149f6 100644 --- a/board/korat/korat.c +++ b/board/korat/korat.c @@ -81,8 +81,8 @@ int board_early_init_f(void) korat_buzzer(0); #endif - mtdcr(ebccfga, xbcfg); - mtdcr(ebccfgd, 0xb8400000); + mtdcr(EBC0_CFGADDR, EBC0_CFG); + mtdcr(EBC0_CFGDATA, 0xb8400000); /* * Setup the interrupt controller polarities, triggers, etc. @@ -157,8 +157,8 @@ int board_early_init_f(void) mtsdr(SDR0_PFC1, sdr0_pfc1); /* PCI arbiter enabled */ - mfsdr(sdr_pci0, reg); - mtsdr(sdr_pci0, 0x80000000 | reg); + mfsdr(SDR0_PCI0, reg); + mtsdr(SDR0_PCI0, 0x80000000 | reg); return 0; } @@ -359,12 +359,12 @@ int misc_init_r(void) gd->bd->bi_flashstart = CONFIG_SYS_FLASH1_TOP - flash1_size; gd->bd->bi_flashoffset = 0; - mtdcr(ebccfga, pb1cr); - pbcr = mfdcr(ebccfgd); + mtdcr(EBC0_CFGADDR, PB1CR); + pbcr = mfdcr(EBC0_CFGDATA); size_val = ffs(flash1_size) - 21; pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17); - mtdcr(ebccfga, pb1cr); - mtdcr(ebccfgd, pbcr); + mtdcr(EBC0_CFGADDR, PB1CR); + mtdcr(EBC0_CFGDATA, pbcr); /* * Re-check to get correct base address @@ -378,12 +378,12 @@ int misc_init_r(void) gd->bd->bi_flashoffset = CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - CONFIG_SYS_FLASH1_ADDR; - mtdcr(ebccfga, pb1cr); - pbcr = mfdcr(ebccfgd); + mtdcr(EBC0_CFGADDR, PB1CR); + pbcr = mfdcr(EBC0_CFGDATA); size_val = ffs(gd->bd->bi_flashsize - CONFIG_SYS_FLASH0_SIZE) - 21; pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17); - mtdcr(ebccfga, pb1cr); - mtdcr(ebccfgd, pbcr); + mtdcr(EBC0_CFGADDR, PB1CR); + mtdcr(EBC0_CFGDATA, pbcr); /* Monitor protection ON by default */ #if defined(CONFIG_KORAT_PERMANENT) @@ -552,8 +552,8 @@ int misc_init_r(void) * This fix will make the MAL burst disabling patch for the Linux * EMAC driver obsolete. */ - reg = mfdcr(plb4_acr) & ~PLB4_ACR_WRP; - mtdcr(plb4_acr, reg); + reg = mfdcr(PLB4_ACR) & ~PLB4_ACR_WRP; + mtdcr(PLB4_ACR, reg); set_serial_number(); set_mac_addresses(); @@ -620,35 +620,35 @@ int pci_pre_init(struct pci_controller *hose) * Set priority for all PLB3 devices to 0. * Set PLB3 arbiter to fair mode. */ - mfsdr(sdr_amp1, addr); - mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00); - addr = mfdcr(plb3_acr); - mtdcr(plb3_acr, addr | 0x80000000); + mfsdr(SD0_AMP1, addr); + mtsdr(SD0_AMP1, (addr & 0x000000FF) | 0x0000FF00); + addr = mfdcr(PLB3_ACR); + mtdcr(PLB3_ACR, addr | 0x80000000); /* * Set priority for all PLB4 devices to 0. */ - mfsdr(sdr_amp0, addr); - mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00); - addr = mfdcr(plb4_acr) | 0xa0000000; /* Was 0x8---- */ - mtdcr(plb4_acr, addr); + mfsdr(SD0_AMP0, addr); + mtsdr(SD0_AMP0, (addr & 0x000000FF) | 0x0000FF00); + addr = mfdcr(PLB4_ACR) | 0xa0000000; /* Was 0x8---- */ + mtdcr(PLB4_ACR, addr); /* * Set Nebula PLB4 arbiter to fair mode. */ /* Segment0 */ - addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair; - addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled; - addr = (addr & ~plb0_acr_rdp_mask) | plb0_acr_rdp_4deep; - addr = (addr & ~plb0_acr_wrp_mask) | plb0_acr_wrp_2deep; - mtdcr(plb0_acr, addr); + addr = (mfdcr(PLB0_ACR) & ~PLB0_ACR_PPM_MASK) | PLB0_ACR_PPM_FAIR; + addr = (addr & ~PLB0_ACR_HBU_MASK) | PLB0_ACR_HBU_ENABLED; + addr = (addr & ~PLB0_ACR_RDP_MASK) | PLB0_ACR_RDP_4DEEP; + addr = (addr & ~PLB0_ACR_WRP_MASK) | PLB0_ACR_WRP_2DEEP; + mtdcr(PLB0_ACR, addr); /* Segment1 */ - addr = (mfdcr(plb1_acr) & ~plb1_acr_ppm_mask) | plb1_acr_ppm_fair; - addr = (addr & ~plb1_acr_hbu_mask) | plb1_acr_hbu_enabled; - addr = (addr & ~plb1_acr_rdp_mask) | plb1_acr_rdp_4deep; - addr = (addr & ~plb1_acr_wrp_mask) | plb1_acr_wrp_2deep; - mtdcr(plb1_acr, addr); + addr = (mfdcr(PLB1_ACR) & ~PLB1_ACR_PPM_MASK) | PLB1_ACR_PPM_FAIR; + addr = (addr & ~PLB1_ACR_HBU_MASK) | PLB1_ACR_HBU_ENABLED; + addr = (addr & ~PLB1_ACR_RDP_MASK) | PLB1_ACR_RDP_4DEEP; + addr = (addr & ~PLB1_ACR_WRP_MASK) | PLB1_ACR_WRP_2DEEP; + mtdcr(PLB1_ACR, addr); #if defined(CONFIG_PCI_PNP) hose->fixup_irq = korat_pci_fixup_irq; diff --git a/board/lwmon5/lwmon5.c b/board/lwmon5/lwmon5.c index 9b76e7663..a9c2a6f44 100644 --- a/board/lwmon5/lwmon5.c +++ b/board/lwmon5/lwmon5.c @@ -38,8 +38,8 @@ int board_early_init_f(void) u32 reg; /* PLB Write pipelining disabled. Denali Core workaround */ - mtdcr(plb0_acr, 0xDE000000); - mtdcr(plb1_acr, 0xDE000000); + mtdcr(PLB0_ACR, 0xDE000000); + mtdcr(PLB1_ACR, 0xDE000000); /*-------------------------------------------------------------------- * Setup the interrupt controller polarities, triggers, etc. @@ -90,9 +90,9 @@ int board_early_init_f(void) /* PCI arbiter disabled */ /* PCI Host Configuration disbaled */ - mfsdr(sdr_pci0, reg); + mfsdr(SDR0_PCI0, reg); reg = 0; - mtsdr(sdr_pci0, 0x00000000 | reg); + mtsdr(SDR0_PCI0, 0x00000000 | reg); gpio_write_bit(CONFIG_SYS_GPIO_FLASH_WP, 1); @@ -157,7 +157,7 @@ int misc_init_r(void) gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize; gd->bd->bi_flashoffset = 0; - mfebc(pb0cr, pbcr); + mfebc(PB0CR, pbcr); switch (gd->bd->bi_flashsize) { case 1 << 20: size_val = 0; @@ -185,7 +185,7 @@ int misc_init_r(void) break; } pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17); - mtebc(pb0cr, pbcr); + mtebc(PB0CR, pbcr); /* * Re-check to get correct base address @@ -249,8 +249,8 @@ int misc_init_r(void) * This fix will make the MAL burst disabling patch for the Linux * EMAC driver obsolete. */ - reg = mfdcr(plb4_acr) & ~PLB4_ACR_WRP; - mtdcr(plb4_acr, reg); + reg = mfdcr(PLB4_ACR) & ~PLB4_ACR_WRP; + mtdcr(PLB4_ACR, reg); /* * Init matrix keyboard @@ -296,35 +296,35 @@ int pci_pre_init(struct pci_controller *hose) | Set priority for all PLB3 devices to 0. | Set PLB3 arbiter to fair mode. +-------------------------------------------------------------------------*/ - mfsdr(sdr_amp1, addr); - mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00); - addr = mfdcr(plb3_acr); - mtdcr(plb3_acr, addr | 0x80000000); + mfsdr(SD0_AMP1, addr); + mtsdr(SD0_AMP1, (addr & 0x000000FF) | 0x0000FF00); + addr = mfdcr(PLB3_ACR); + mtdcr(PLB3_ACR, addr | 0x80000000); /*-------------------------------------------------------------------------+ | Set priority for all PLB4 devices to 0. +-------------------------------------------------------------------------*/ - mfsdr(sdr_amp0, addr); - mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00); - addr = mfdcr(plb4_acr) | 0xa0000000; /* Was 0x8---- */ - mtdcr(plb4_acr, addr); + mfsdr(SD0_AMP0, addr); + mtsdr(SD0_AMP0, (addr & 0x000000FF) | 0x0000FF00); + addr = mfdcr(PLB4_ACR) | 0xa0000000; /* Was 0x8---- */ + mtdcr(PLB4_ACR, addr); /*-------------------------------------------------------------------------+ | Set Nebula PLB4 arbiter to fair mode. +-------------------------------------------------------------------------*/ /* Segment0 */ - addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair; - addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled; - addr = (addr & ~plb0_acr_rdp_mask) | plb0_acr_rdp_4deep; - addr = (addr & ~plb0_acr_wrp_mask) | plb0_acr_wrp_2deep; - mtdcr(plb0_acr, addr); + addr = (mfdcr(PLB0_ACR) & ~PLB0_ACR_PPM_MASK) | PLB0_ACR_PPM_FAIR; + addr = (addr & ~PLB0_ACR_HBU_MASK) | PLB0_ACR_HBU_ENABLED; + addr = (addr & ~PLB0_ACR_RDP_MASK) | PLB0_ACR_RDP_4DEEP; + addr = (addr & ~PLB0_ACR_WRP_MASK) | PLB0_ACR_WRP_2DEEP; + mtdcr(PLB0_ACR, addr); /* Segment1 */ - addr = (mfdcr(plb1_acr) & ~plb1_acr_ppm_mask) | plb1_acr_ppm_fair; - addr = (addr & ~plb1_acr_hbu_mask) | plb1_acr_hbu_enabled; - addr = (addr & ~plb1_acr_rdp_mask) | plb1_acr_rdp_4deep; - addr = (addr & ~plb1_acr_wrp_mask) | plb1_acr_wrp_2deep; - mtdcr(plb1_acr, addr); + addr = (mfdcr(PLB1_ACR) & ~PLB1_ACR_PPM_MASK) | PLB1_ACR_PPM_FAIR; + addr = (addr & ~PLB1_ACR_HBU_MASK) | PLB1_ACR_HBU_ENABLED; + addr = (addr & ~PLB1_ACR_RDP_MASK) | PLB1_ACR_RDP_4DEEP; + addr = (addr & ~PLB1_ACR_WRP_MASK) | PLB1_ACR_WRP_2DEEP; + mtdcr(PLB1_ACR, addr); return 1; } diff --git a/board/mpl/common/flash.c b/board/mpl/common/flash.c index 355608cd3..682f0e76d 100644 --- a/board/mpl/common/flash.c +++ b/board/mpl/common/flash.c @@ -97,7 +97,7 @@ int get_boot_mode(void) { unsigned long pbcr; int res = 0; - pbcr = mfdcr (strap); + pbcr = mfdcr (CPC0_PSR); if ((pbcr & PSR_ROM_WIDTH_MASK) == 0) /* boot via MPS or MPS mapping */ res = BOOT_MPS; @@ -123,29 +123,29 @@ void setup_cs_reloc(void) /* first findout on which cs the flash is */ if(mode & BOOT_MPS) { /* map flash high on CS1 and MPS on CS0 */ - mtdcr (ebccfga, pb0ap); - mtdcr (ebccfgd, MPS_AP); - mtdcr (ebccfga, pb0cr); - mtdcr (ebccfgd, MPS_CR); + mtdcr (EBC0_CFGADDR, PB0AP); + mtdcr (EBC0_CFGDATA, MPS_AP); + mtdcr (EBC0_CFGADDR, PB0CR); + mtdcr (EBC0_CFGDATA, MPS_CR); /* we use the default values (max values) for the flash * because its real size is not yet known */ - mtdcr (ebccfga, pb1ap); - mtdcr (ebccfgd, FLASH_AP); - mtdcr (ebccfga, pb1cr); - mtdcr (ebccfgd, FLASH_CR_B); + mtdcr (EBC0_CFGADDR, PB1AP); + mtdcr (EBC0_CFGDATA, FLASH_AP); + mtdcr (EBC0_CFGADDR, PB1CR); + mtdcr (EBC0_CFGDATA, FLASH_CR_B); } else { /* map flash high on CS0 and MPS on CS1 */ - mtdcr (ebccfga, pb1ap); - mtdcr (ebccfgd, MPS_AP); - mtdcr (ebccfga, pb1cr); - mtdcr (ebccfgd, MPS_CR); + mtdcr (EBC0_CFGADDR, PB1AP); + mtdcr (EBC0_CFGDATA, MPS_AP); + mtdcr (EBC0_CFGADDR, PB1CR); + mtdcr (EBC0_CFGDATA, MPS_CR); /* we use the default values (max values) for the flash * because its real size is not yet known */ - mtdcr (ebccfga, pb0ap); - mtdcr (ebccfgd, FLASH_AP); - mtdcr (ebccfga, pb0cr); - mtdcr (ebccfgd, FLASH_CR_B); + mtdcr (EBC0_CFGADDR, PB0AP); + mtdcr (EBC0_CFGDATA, FLASH_AP); + mtdcr (EBC0_CFGADDR, PB0CR); + mtdcr (EBC0_CFGDATA, FLASH_CR_B); } } @@ -217,34 +217,34 @@ unsigned long flash_init (void) } if(mode & BOOT_MPS) { /* flash is on CS1 */ - mtdcr(ebccfga, pb1cr); - flashcr = mfdcr (ebccfgd); + mtdcr(EBC0_CFGADDR, PB1CR); + flashcr = mfdcr (EBC0_CFGDATA); /* we map the flash high in every case */ flashcr&=0x0001FFFF; /* mask out address bits */ flashcr|= ((0-flash_info[0].size) & 0xFFF00000); /* start addr */ flashcr|= (i << 17); /* size addr */ - mtdcr(ebccfga, pb1cr); - mtdcr(ebccfgd, flashcr); + mtdcr(EBC0_CFGADDR, PB1CR); + mtdcr(EBC0_CFGDATA, flashcr); } else { /* flash is on CS0 */ - mtdcr(ebccfga, pb0cr); - flashcr = mfdcr (ebccfgd); + mtdcr(EBC0_CFGADDR, PB0CR); + flashcr = mfdcr (EBC0_CFGDATA); /* we map the flash high in every case */ flashcr&=0x0001FFFF; /* mask out address bits */ flashcr|= ((0-flash_info[0].size) & 0xFFF00000); /* start addr */ flashcr|= (i << 17); /* size addr */ - mtdcr(ebccfga, pb0cr); - mtdcr(ebccfgd, flashcr); + mtdcr(EBC0_CFGADDR, PB0CR); + mtdcr(EBC0_CFGDATA, flashcr); } #if 0 /* enable this (PIP405/MIP405 only) if you want to test if the relocation has be done ok. This will disable both Chipselects */ - mtdcr (ebccfga, pb0cr); - mtdcr (ebccfgd, 0L); - mtdcr (ebccfga, pb1cr); - mtdcr (ebccfgd, 0L); + mtdcr (EBC0_CFGADDR, PB0CR); + mtdcr (EBC0_CFGDATA, 0L); + mtdcr (EBC0_CFGADDR, PB1CR); + mtdcr (EBC0_CFGDATA, 0L); printf("CS0 & CS1 switched off for test\n"); #endif /* patch version_string */ diff --git a/board/mpl/mip405/init.S b/board/mpl/mip405/init.S index 19d922051..f3d94c3fc 100644 --- a/board/mpl/mip405/init.S +++ b/board/mpl/mip405/init.S @@ -55,7 +55,7 @@ .globl ext_bus_cntlr_init ext_bus_cntlr_init: mflr r4 /* save link register */ - mfdcr r3,strap /* get strapping reg */ + mfdcr r3,CPC0_PSR /* get strapping reg */ andi. r0, r3, PSR_ROM_LOC /* mask out irrelevant bits */ bnelr /* jump back if PCI boot */ @@ -84,9 +84,9 @@ ext_bus_cntlr_init: /*----------------------------------------------------------------------- * decide boot up mode *----------------------------------------------------------------------- */ - addi r4,0,pb0cr - mtdcr ebccfga,r4 - mfdcr r4,ebccfgd + addi r4,0,PB0CR + mtdcr EBC0_CFGADDR,r4 + mfdcr r4,EBC0_CFGDATA andi. r0, r4, 0x2000 /* mask out irrelevant bits */ beq 0f /* jump if 8 bit bus width */ @@ -96,18 +96,18 @@ ext_bus_cntlr_init: * Memory Bank 0 (16 Bit Flash) initialization *---------------------------------------------------------------------- */ - addi r4,0,pb0ap - mtdcr ebccfga,r4 + addi r4,0,PB1AP + mtdcr EBC0_CFGADDR,r4 addis r4,0,(FLASH_AP_B)@h ori r4,r4,(FLASH_AP_B)@l - mtdcr ebccfgd,r4 + mtdcr EBC0_CFGDATA,r4 - addi r4,0,pb0cr - mtdcr ebccfga,r4 + addi r4,0,PB0CR + mtdcr EBC0_CFGADDR,r4 /* BS=0x010(4MB),BU=0x3(R/W), */ addis r4,0,(FLASH_CR_B)@h ori r4,r4,(FLASH_CR_B)@l - mtdcr ebccfgd,r4 + mtdcr EBC0_CFGDATA,r4 b 1f 0: @@ -117,66 +117,66 @@ ext_bus_cntlr_init: * Memory Bank 0 Multi Purpose Socket initialization *----------------------------------------------------------------------- */ /* 0x7F8FFE80 slowest boot */ - addi r4,0,pb0ap - mtdcr ebccfga,r4 + addi r4,0,PB1AP + mtdcr EBC0_CFGADDR,r4 addis r4,0,(MPS_AP_B)@h ori r4,r4,(MPS_AP_B)@l - mtdcr ebccfgd,r4 + mtdcr EBC0_CFGDATA,r4 - addi r4,0,pb0cr - mtdcr ebccfga,r4 + addi r4,0,PB0CR + mtdcr EBC0_CFGADDR,r4 /* BS=0x010(4MB),BU=0x3(R/W), */ addis r4,0,(MPS_CR_B)@h ori r4,r4,(MPS_CR_B)@l - mtdcr ebccfgd,r4 + mtdcr EBC0_CFGDATA,r4 1: /*----------------------------------------------------------------------- * Memory Bank 2-3-4-5-6 (not used) initialization *-----------------------------------------------------------------------*/ - addi r4,0,pb1cr - mtdcr ebccfga,r4 + addi r4,0,PB1CR + mtdcr EBC0_CFGADDR,r4 addis r4,0,0x0000 ori r4,r4,0x0000 - mtdcr ebccfgd,r4 + mtdcr EBC0_CFGDATA,r4 - addi r4,0,pb2cr - mtdcr ebccfga,r4 + addi r4,0,PB2CR + mtdcr EBC0_CFGADDR,r4 addis r4,0,0x0000 ori r4,r4,0x0000 - mtdcr ebccfgd,r4 + mtdcr EBC0_CFGDATA,r4 - addi r4,0,pb3cr - mtdcr ebccfga,r4 + addi r4,0,PB3CR + mtdcr EBC0_CFGADDR,r4 addis r4,0,0x0000 ori r4,r4,0x0000 - mtdcr ebccfgd,r4 + mtdcr EBC0_CFGDATA,r4 - addi r4,0,pb4cr - mtdcr ebccfga,r4 + addi r4,0,PB4CR + mtdcr EBC0_CFGADDR,r4 addis r4,0,0x0000 ori r4,r4,0x0000 - mtdcr ebccfgd,r4 + mtdcr EBC0_CFGDATA,r4 - addi r4,0,pb5cr - mtdcr ebccfga,r4 + addi r4,0,PB5CR + mtdcr EBC0_CFGADDR,r4 addis r4,0,0x0000 ori r4,r4,0x0000 - mtdcr ebccfgd,r4 + mtdcr EBC0_CFGDATA,r4 - addi r4,0,pb6cr - mtdcr ebccfga,r4 + addi r4,0,PB6CR + mtdcr EBC0_CFGADDR,r4 addis r4,0,0x0000 ori r4,r4,0x0000 - mtdcr ebccfgd,r4 + mtdcr EBC0_CFGDATA,r4 - addi r4,0,pb7cr - mtdcr ebccfga,r4 + addi r4,0,PB7CR + mtdcr EBC0_CFGADDR,r4 addis r4,0,0x0000 ori r4,r4,0x0000 - mtdcr ebccfgd,r4 + mtdcr EBC0_CFGDATA,r4 nop /* pass2 DCR errata #8 */ blr diff --git a/board/mpl/mip405/mip405.c b/board/mpl/mip405/mip405.c index 1738f5438..d8279e81c 100644 --- a/board/mpl/mip405/mip405.c +++ b/board/mpl/mip405/mip405.c @@ -256,16 +256,16 @@ int init_sdram (void) gd->baudrate = 9600; serial_init (); /* set up the pld */ - mtdcr (ebccfga, pb7ap); - mtdcr (ebccfgd, PLD_AP); - mtdcr (ebccfga, pb7cr); - mtdcr (ebccfgd, PLD_CR); + mtdcr (EBC0_CFGADDR, PB7AP); + mtdcr (EBC0_CFGDATA, PLD_AP); + mtdcr (EBC0_CFGADDR, PB7CR); + mtdcr (EBC0_CFGDATA, PLD_CR); /* THIS IS OBSOLETE */ /* set up the board rev reg*/ - mtdcr (ebccfga, pb5ap); - mtdcr (ebccfgd, BOARD_AP); - mtdcr (ebccfga, pb5cr); - mtdcr (ebccfgd, BOARD_CR); + mtdcr (EBC0_CFGADDR, PB5AP); + mtdcr (EBC0_CFGDATA, BOARD_AP); + mtdcr (EBC0_CFGADDR, PB5CR); + mtdcr (EBC0_CFGDATA, BOARD_CR); #ifdef SDRAM_DEBUG /* get all informations from PLD */ serial_puts ("\nPLD Part 0x"); @@ -289,30 +289,30 @@ int init_sdram (void) SDRAM_err ("U-Boot configured for a MIP405 not for a MIP405T!!!\n"); #endif /* set-up the chipselect machine */ - mtdcr (ebccfga, pb0cr); /* get cs0 config reg */ - tmp = mfdcr (ebccfgd); + mtdcr (EBC0_CFGADDR, PB0CR); /* get cs0 config reg */ + tmp = mfdcr (EBC0_CFGDATA); if ((tmp & 0x00002000) == 0) { /* MPS Boot, set up the flash */ - mtdcr (ebccfga, pb1ap); - mtdcr (ebccfgd, FLASH_AP); - mtdcr (ebccfga, pb1cr); - mtdcr (ebccfgd, FLASH_CR); + mtdcr (EBC0_CFGADDR, PB1AP); + mtdcr (EBC0_CFGDATA, FLASH_AP); + mtdcr (EBC0_CFGADDR, PB1CR); + mtdcr (EBC0_CFGDATA, FLASH_CR); } else { /* Flash boot, set up the MPS */ - mtdcr (ebccfga, pb1ap); - mtdcr (ebccfgd, MPS_AP); - mtdcr (ebccfga, pb1cr); - mtdcr (ebccfgd, MPS_CR); + mtdcr (EBC0_CFGADDR, PB1AP); + mtdcr (EBC0_CFGDATA, MPS_AP); + mtdcr (EBC0_CFGADDR, PB1CR); + mtdcr (EBC0_CFGDATA, MPS_CR); } /* set up UART0 (CS2) and UART1 (CS3) */ - mtdcr (ebccfga, pb2ap); - mtdcr (ebccfgd, UART0_AP); - mtdcr (ebccfga, pb2cr); - mtdcr (ebccfgd, UART0_CR); - mtdcr (ebccfga, pb3ap); - mtdcr (ebccfgd, UART1_AP); - mtdcr (ebccfga, pb3cr); - mtdcr (ebccfgd, UART1_CR); + mtdcr (EBC0_CFGADDR, PB2AP); + mtdcr (EBC0_CFGDATA, UART0_AP); + mtdcr (EBC0_CFGADDR, PB2CR); + mtdcr (EBC0_CFGDATA, UART0_CR); + mtdcr (EBC0_CFGADDR, PB3AP); + mtdcr (EBC0_CFGDATA, UART1_AP); + mtdcr (EBC0_CFGADDR, PB3CR); + mtdcr (EBC0_CFGDATA, UART1_CR); bc = in8 (PLD_BOARD_CFG_REG); #ifdef SDRAM_DEBUG serial_puts ("\nstart SDRAM Setup\n"); @@ -348,8 +348,8 @@ int init_sdram (void) /* trc_clocks is sum of trp_clocks + tras_clocks */ trc_clocks = trp_clocks + tras_clocks; /* get SDRAM timing register */ - mtdcr (memcfga, mem_sdtr1); - sdram_tim = mfdcr (memcfgd) & ~0x018FC01F; + mtdcr (SDRAM0_CFGADDR, mem_sdtr1); + sdram_tim = mfdcr (SDRAM0_CFGDATA) & ~0x018FC01F; /* insert CASL value */ sdram_tim |= ((unsigned long) (cal_val)) << 23; /* insert PTA value */ @@ -369,8 +369,8 @@ int init_sdram (void) /* insert SZ value; */ tmp |= ((unsigned long) sdram_table[i].sz << 17); /* get SDRAM bank 0 register */ - mtdcr (memcfga, mem_mb0cf); - sdram_bank = mfdcr (memcfgd) & ~0xFFCEE001; + mtdcr (SDRAM0_CFGADDR, mem_mb0cf); + sdram_bank = mfdcr (SDRAM0_CFGDATA) & ~0xFFCEE001; sdram_bank |= (baseaddr | tmp | 0x01); #ifdef SDRAM_DEBUG @@ -380,8 +380,8 @@ int init_sdram (void) #endif /* write SDRAM timing register */ - mtdcr (memcfga, mem_sdtr1); - mtdcr (memcfgd, sdram_tim); + mtdcr (SDRAM0_CFGADDR, mem_sdtr1); + mtdcr (SDRAM0_CFGDATA, sdram_tim); #ifdef SDRAM_DEBUG serial_puts ("mb0cf: "); @@ -390,23 +390,23 @@ int init_sdram (void) #endif /* write SDRAM bank 0 register */ - mtdcr (memcfga, mem_mb0cf); - mtdcr (memcfgd, sdram_bank); + mtdcr (SDRAM0_CFGADDR, mem_mb0cf); + mtdcr (SDRAM0_CFGDATA, sdram_bank); if (get_bus_freq (tmp) > 110000000) { /* > 110MHz */ /* get SDRAM refresh interval register */ - mtdcr (memcfga, mem_rtr); - tmp = mfdcr (memcfgd) & ~0x3FF80000; + mtdcr (SDRAM0_CFGADDR, mem_rtr); + tmp = mfdcr (SDRAM0_CFGDATA) & ~0x3FF80000; tmp |= 0x07F00000; } else { /* get SDRAM refresh interval register */ - mtdcr (memcfga, mem_rtr); - tmp = mfdcr (memcfgd) & ~0x3FF80000; + mtdcr (SDRAM0_CFGADDR, mem_rtr); + tmp = mfdcr (SDRAM0_CFGDATA) & ~0x3FF80000; tmp |= 0x05F00000; } /* write SDRAM refresh interval register */ - mtdcr (memcfga, mem_rtr); - mtdcr (memcfgd, tmp); + mtdcr (SDRAM0_CFGADDR, mem_rtr); + mtdcr (SDRAM0_CFGDATA, tmp); /* enable ECC if used */ #if defined(ENABLE_ECC) && !defined(CONFIG_BOOT_PCI) if (sdram_table[i].ecc) { @@ -415,19 +415,19 @@ int init_sdram (void) #ifdef SDRAM_DEBUG serial_puts ("disable ECC.. "); #endif - mtdcr (memcfga, mem_ecccf); - tmp = mfdcr (memcfgd); + mtdcr (SDRAM0_CFGADDR, mem_ecccf); + tmp = mfdcr (SDRAM0_CFGDATA); tmp &= 0xff0fffff; /* disable all banks */ - mtdcr (memcfga, mem_ecccf); + mtdcr (SDRAM0_CFGADDR, mem_ecccf); /* set up SDRAM Controller with ECC enabled */ #ifdef SDRAM_DEBUG serial_puts ("setup SDRAM Controller.. "); #endif - mtdcr (memcfgd, tmp); - mtdcr (memcfga, mem_mcopt1); - tmp = (mfdcr (memcfgd) & ~0xFFE00000) | 0x90800000; - mtdcr (memcfga, mem_mcopt1); - mtdcr (memcfgd, tmp); + mtdcr (SDRAM0_CFGDATA, tmp); + mtdcr (SDRAM0_CFGADDR, mem_mcopt1); + tmp = (mfdcr (SDRAM0_CFGDATA) & ~0xFFE00000) | 0x90800000; + mtdcr (SDRAM0_CFGADDR, mem_mcopt1); + mtdcr (SDRAM0_CFGDATA, tmp); udelay (600); #ifdef SDRAM_DEBUG serial_puts ("fill the memory..\n"); @@ -447,19 +447,19 @@ int init_sdram (void) serial_puts ("enable ECC\n"); #endif udelay (400); - mtdcr (memcfga, mem_ecccf); - tmp = mfdcr (memcfgd); + mtdcr (SDRAM0_CFGADDR, mem_ecccf); + tmp = mfdcr (SDRAM0_CFGDATA); tmp |= 0x00800000; /* enable bank 0 */ - mtdcr (memcfgd, tmp); + mtdcr (SDRAM0_CFGDATA, tmp); udelay (400); } else #endif { /* enable SDRAM controller with no ECC, 32-bit SDRAM width, 16 byte burst */ - mtdcr (memcfga, mem_mcopt1); - tmp = (mfdcr (memcfgd) & ~0xFFE00000) | 0x80C00000; - mtdcr (memcfga, mem_mcopt1); - mtdcr (memcfgd, tmp); + mtdcr (SDRAM0_CFGADDR, mem_mcopt1); + tmp = (mfdcr (SDRAM0_CFGDATA) & ~0xFFE00000) | 0x80C00000; + mtdcr (SDRAM0_CFGADDR, mem_mcopt1); + mtdcr (SDRAM0_CFGDATA, tmp); udelay (400); } serial_puts ("\n"); @@ -631,14 +631,14 @@ phys_size_t initdram (int board_type) ds = 0; /* since the DRAM controller is allready set up, calculate the size with the bank registers */ - mtdcr (memcfga, mem_mb0cf); - bank_reg[0] = mfdcr (memcfgd); - mtdcr (memcfga, mem_mb1cf); - bank_reg[1] = mfdcr (memcfgd); - mtdcr (memcfga, mem_mb2cf); - bank_reg[2] = mfdcr (memcfgd); - mtdcr (memcfga, mem_mb3cf); - bank_reg[3] = mfdcr (memcfgd); + mtdcr (SDRAM0_CFGADDR, mem_mb0cf); + bank_reg[0] = mfdcr (SDRAM0_CFGDATA); + mtdcr (SDRAM0_CFGADDR, mem_mb1cf); + bank_reg[1] = mfdcr (SDRAM0_CFGDATA); + mtdcr (SDRAM0_CFGADDR, mem_mb2cf); + bank_reg[2] = mfdcr (SDRAM0_CFGDATA); + mtdcr (SDRAM0_CFGADDR, mem_mb3cf); + bank_reg[3] = mfdcr (SDRAM0_CFGDATA); TotalSize = 0; for (i = 0; i < 4; i++) { if ((bank_reg[i] & 0x1) == 0x1) { @@ -648,8 +648,8 @@ phys_size_t initdram (int board_type) } else ds = 1; } - mtdcr (memcfga, mem_ecccf); - tmp = mfdcr (memcfgd); + mtdcr (SDRAM0_CFGADDR, mem_ecccf); + tmp = mfdcr (SDRAM0_CFGDATA); if (!tmp) printf ("No "); @@ -687,7 +687,7 @@ int misc_init_r (void) rtc_get (&tm); start=get_timer(0); /* if MIP405 has booted from PCI, reset CCR0[24] as described in errata PCI_18 */ - if (mfdcr(strap) & PSR_ROM_LOC) + if (mfdcr(CPC0_PSR) & PSR_ROM_LOC) mtspr(SPRN_CCR0, (mfspr(SPRN_CCR0) & ~0x80)); return (0); diff --git a/board/mpl/pip405/init.S b/board/mpl/pip405/init.S index 61f37d74f..18e8b09dd 100644 --- a/board/mpl/pip405/init.S +++ b/board/mpl/pip405/init.S @@ -54,7 +54,7 @@ .globl ext_bus_cntlr_init ext_bus_cntlr_init: mflr r4 /* save link register */ - mfdcr r3,strap /* get strapping reg */ + mfdcr r3,CPC0_PSR /* get strapping reg */ andi. r0, r3, PSR_ROM_LOC /* mask out irrelevant bits */ bnelr /* jump back if PCI boot */ @@ -83,9 +83,9 @@ /*----------------------------------------------------------------------- * decide boot up mode *----------------------------------------------------------------------- */ - addi r4,0,pb0cr - mtdcr ebccfga,r4 - mfdcr r4,ebccfgd + addi r4,0,PB0CR + mtdcr EBC0_CFGADDR,r4 + mfdcr r4,EBC0_CFGDATA andi. r0, r4, 0x2000 /* mask out irrelevant bits */ beq 0f /* jump if 8 bit bus width */ @@ -95,18 +95,18 @@ * Memory Bank 0 (16 Bit Flash) initialization *---------------------------------------------------------------------- */ - addi r4,0,pb0ap - mtdcr ebccfga,r4 + addi r4,0,PB1AP + mtdcr EBC0_CFGADDR,r4 addis r4,0,(FLASH_AP_B)@h ori r4,r4,(FLASH_AP_B)@l - mtdcr ebccfgd,r4 + mtdcr EBC0_CFGDATA,r4 - addi r4,0,pb0cr - mtdcr ebccfga,r4 + addi r4,0,PB0CR + mtdcr EBC0_CFGADDR,r4 /* BS=0x010(4MB),BU=0x3(R/W), */ addis r4,0,(FLASH_CR_B)@h ori r4,r4,(FLASH_CR_B)@l - mtdcr ebccfgd,r4 + mtdcr EBC0_CFGDATA,r4 b 1f 0: @@ -115,65 +115,65 @@ * Memory Bank 0 Multi Purpose Socket initialization *----------------------------------------------------------------------- */ /* 0x7F8FFE80 slowest boot */ - addi r4,0,pb0ap - mtdcr ebccfga,r4 + addi r4,0,PB1AP + mtdcr EBC0_CFGADDR,r4 addis r4,0,(MPS_AP_B)@h ori r4,r4,(MPS_AP_B)@l - mtdcr ebccfgd,r4 + mtdcr EBC0_CFGDATA,r4 - addi r4,0,pb0cr - mtdcr ebccfga,r4 + addi r4,0,PB0CR + mtdcr EBC0_CFGADDR,r4 /* BS=0x010(4MB),BU=0x3(R/W), */ addis r4,0,(MPS_CR_B)@h ori r4,r4,(MPS_CR_B)@l - mtdcr ebccfgd,r4 + mtdcr EBC0_CFGDATA,r4 1: /*----------------------------------------------------------------------- * Memory Bank 2-3-4-5-6 (not used) initialization *-----------------------------------------------------------------------*/ - addi r4,0,pb1cr - mtdcr ebccfga,r4 + addi r4,0,PB1CR + mtdcr EBC0_CFGADDR,r4 addis r4,0,0x0000 ori r4,r4,0x0000 - mtdcr ebccfgd,r4 + mtdcr EBC0_CFGDATA,r4 - addi r4,0,pb2cr - mtdcr ebccfga,r4 + addi r4,0,PB2CR + mtdcr EBC0_CFGADDR,r4 addis r4,0,0x0000 ori r4,r4,0x0000 - mtdcr ebccfgd,r4 + mtdcr EBC0_CFGDATA,r4 - addi r4,0,pb3cr - mtdcr ebccfga,r4 + addi r4,0,PB3CR + mtdcr EBC0_CFGADDR,r4 addis r4,0,0x0000 ori r4,r4,0x0000 - mtdcr ebccfgd,r4 + mtdcr EBC0_CFGDATA,r4 - addi r4,0,pb4cr - mtdcr ebccfga,r4 + addi r4,0,PB4CR + mtdcr EBC0_CFGADDR,r4 addis r4,0,0x0000 ori r4,r4,0x0000 - mtdcr ebccfgd,r4 + mtdcr EBC0_CFGDATA,r4 - addi r4,0,pb5cr - mtdcr ebccfga,r4 + addi r4,0,PB5CR + mtdcr EBC0_CFGADDR,r4 addis r4,0,0x0000 ori r4,r4,0x0000 - mtdcr ebccfgd,r4 + mtdcr EBC0_CFGDATA,r4 - addi r4,0,pb6cr - mtdcr ebccfga,r4 + addi r4,0,PB6CR + mtdcr EBC0_CFGADDR,r4 addis r4,0,0x0000 ori r4,r4,0x0000 - mtdcr ebccfgd,r4 + mtdcr EBC0_CFGDATA,r4 - addi r4,0,pb7cr - mtdcr ebccfga,r4 + addi r4,0,PB7CR + mtdcr EBC0_CFGADDR,r4 addis r4,0,0x0000 ori r4,r4,0x0000 - mtdcr ebccfgd,r4 + mtdcr EBC0_CFGDATA,r4 nop /* pass2 DCR errata #8 */ blr diff --git a/board/mpl/pip405/pip405.c b/board/mpl/pip405/pip405.c index 677437d09..e00d1d08f 100644 --- a/board/mpl/pip405/pip405.c +++ b/board/mpl/pip405/pip405.c @@ -193,10 +193,10 @@ int board_early_init_f (void) unsigned char cal_index, cal_val, spd_version, spd_chksum; unsigned char buf[8]; /* set up the config port */ - mtdcr (ebccfga, pb7ap); - mtdcr (ebccfgd, CONFIG_PORT_AP); - mtdcr (ebccfga, pb7cr); - mtdcr (ebccfgd, CONFIG_PORT_CR); + mtdcr (EBC0_CFGADDR, PB7AP); + mtdcr (EBC0_CFGDATA, CONFIG_PORT_AP); + mtdcr (EBC0_CFGADDR, PB7CR); + mtdcr (EBC0_CFGDATA, CONFIG_PORT_CR); memclk = get_bus_freq (tmemclk); tmemclk = 1000000000 / (memclk / 100); /* in 10 ps units */ @@ -361,8 +361,8 @@ int board_early_init_f (void) SDRAM_err ("unsupported SDRAM"); /* get SDRAM timing register */ - mtdcr (memcfga, mem_sdtr1); - tmp = mfdcr (memcfgd) & ~0x018FC01F; + mtdcr (SDRAM0_CFGADDR, mem_sdtr1); + tmp = mfdcr (SDRAM0_CFGDATA) & ~0x018FC01F; /* insert CASL value */ /* tmp |= ((unsigned long)cal_val) << 23; */ tmp |= ((unsigned long) cal_val) << 23; @@ -385,8 +385,8 @@ int board_early_init_f (void) #endif /* write SDRAM timing register */ - mtdcr (memcfga, mem_sdtr1); - mtdcr (memcfgd, tmp); + mtdcr (SDRAM0_CFGADDR, mem_sdtr1); + mtdcr (SDRAM0_CFGDATA, tmp); baseaddr = CONFIG_SYS_SDRAM_BASE; bank_size = (((unsigned long) density) << 22) / 2; /* insert AM value */ @@ -418,8 +418,8 @@ int board_early_init_f (void) SDRAM_err ("unsupported SDRAM"); } /* endswitch */ /* get SDRAM bank 0 register */ - mtdcr (memcfga, mem_mb0cf); - bank = mfdcr (memcfgd) & ~0xFFCEE001; + mtdcr (SDRAM0_CFGADDR, mem_mb0cf); + bank = mfdcr (SDRAM0_CFGDATA) & ~0xFFCEE001; bank |= (baseaddr | tmp | 0x01); #ifdef SDRAM_DEBUG serial_puts ("bank0: baseaddr: "); @@ -434,12 +434,12 @@ int board_early_init_f (void) sdram_size += bank_size; /* write SDRAM bank 0 register */ - mtdcr (memcfga, mem_mb0cf); - mtdcr (memcfgd, bank); + mtdcr (SDRAM0_CFGADDR, mem_mb0cf); + mtdcr (SDRAM0_CFGDATA, bank); /* get SDRAM bank 1 register */ - mtdcr (memcfga, mem_mb1cf); - bank = mfdcr (memcfgd) & ~0xFFCEE001; + mtdcr (SDRAM0_CFGADDR, mem_mb1cf); + bank = mfdcr (SDRAM0_CFGDATA) & ~0xFFCEE001; sdram_size = 0; #ifdef SDRAM_DEBUG @@ -459,12 +459,12 @@ int board_early_init_f (void) serial_puts ("\n"); #endif /* write SDRAM bank 1 register */ - mtdcr (memcfga, mem_mb1cf); - mtdcr (memcfgd, bank); + mtdcr (SDRAM0_CFGADDR, mem_mb1cf); + mtdcr (SDRAM0_CFGDATA, bank); /* get SDRAM bank 2 register */ - mtdcr (memcfga, mem_mb2cf); - bank = mfdcr (memcfgd) & ~0xFFCEE001; + mtdcr (SDRAM0_CFGADDR, mem_mb2cf); + bank = mfdcr (SDRAM0_CFGDATA) & ~0xFFCEE001; bank |= (baseaddr | tmp | 0x01); @@ -482,12 +482,12 @@ int board_early_init_f (void) sdram_size += bank_size; /* write SDRAM bank 2 register */ - mtdcr (memcfga, mem_mb2cf); - mtdcr (memcfgd, bank); + mtdcr (SDRAM0_CFGADDR, mem_mb2cf); + mtdcr (SDRAM0_CFGDATA, bank); /* get SDRAM bank 3 register */ - mtdcr (memcfga, mem_mb3cf); - bank = mfdcr (memcfgd) & ~0xFFCEE001; + mtdcr (SDRAM0_CFGADDR, mem_mb3cf); + bank = mfdcr (SDRAM0_CFGDATA) & ~0xFFCEE001; #ifdef SDRAM_DEBUG serial_puts ("bank3: baseaddr: "); @@ -509,13 +509,13 @@ int board_early_init_f (void) #endif /* write SDRAM bank 3 register */ - mtdcr (memcfga, mem_mb3cf); - mtdcr (memcfgd, bank); + mtdcr (SDRAM0_CFGADDR, mem_mb3cf); + mtdcr (SDRAM0_CFGDATA, bank); /* get SDRAM refresh interval register */ - mtdcr (memcfga, mem_rtr); - tmp = mfdcr (memcfgd) & ~0x3FF80000; + mtdcr (SDRAM0_CFGADDR, mem_rtr); + tmp = mfdcr (SDRAM0_CFGDATA) & ~0x3FF80000; if (tmemclk < NSto10PS (16)) tmp |= 0x05F00000; @@ -523,14 +523,14 @@ int board_early_init_f (void) tmp |= 0x03F80000; /* write SDRAM refresh interval register */ - mtdcr (memcfga, mem_rtr); - mtdcr (memcfgd, tmp); + mtdcr (SDRAM0_CFGADDR, mem_rtr); + mtdcr (SDRAM0_CFGDATA, tmp); /* enable SDRAM controller with no ECC, 32-bit SDRAM width, 16 byte burst */ - mtdcr (memcfga, mem_mcopt1); - tmp = (mfdcr (memcfgd) & ~0xFFE00000) | 0x80E00000; - mtdcr (memcfga, mem_mcopt1); - mtdcr (memcfgd, tmp); + mtdcr (SDRAM0_CFGADDR, mem_mcopt1); + tmp = (mfdcr (SDRAM0_CFGDATA) & ~0xFFE00000) | 0x80E00000; + mtdcr (SDRAM0_CFGADDR, mem_mcopt1); + mtdcr (SDRAM0_CFGDATA, tmp); /*-------------------------------------------------------------------------+ @@ -619,14 +619,14 @@ phys_size_t initdram (int board_type) /* since the DRAM controller is allready set up, * calculate the size with the bank registers */ - mtdcr (memcfga, mem_mb0cf); - bank_reg[0] = mfdcr (memcfgd); - mtdcr (memcfga, mem_mb1cf); - bank_reg[1] = mfdcr (memcfgd); - mtdcr (memcfga, mem_mb2cf); - bank_reg[2] = mfdcr (memcfgd); - mtdcr (memcfga, mem_mb3cf); - bank_reg[3] = mfdcr (memcfgd); + mtdcr (SDRAM0_CFGADDR, mem_mb0cf); + bank_reg[0] = mfdcr (SDRAM0_CFGDATA); + mtdcr (SDRAM0_CFGADDR, mem_mb1cf); + bank_reg[1] = mfdcr (SDRAM0_CFGDATA); + mtdcr (SDRAM0_CFGADDR, mem_mb2cf); + bank_reg[2] = mfdcr (SDRAM0_CFGDATA); + mtdcr (SDRAM0_CFGADDR, mem_mb3cf); + bank_reg[3] = mfdcr (SDRAM0_CFGDATA); TotalSize = 0; for (i = 0; i < 4; i++) { if ((bank_reg[i] & 0x1) == 0x1) { @@ -668,7 +668,7 @@ int misc_init_r (void) gd->bd->bi_flashoffset=0; /* if PIP405 has booted from PCI, reset CCR0[24] as described in errata PCI_18 */ - if (mfdcr(strap) & PSR_ROM_LOC) + if (mfdcr(CPC0_PSR) & PSR_ROM_LOC) mtspr(SPRN_CCR0, (mfspr(SPRN_CCR0) & ~0x80)); return (0); diff --git a/board/muas3001/muas3001.c b/board/muas3001/muas3001.c index bf4ccb6e1..36caed813 100644 --- a/board/muas3001/muas3001.c +++ b/board/muas3001/muas3001.c @@ -342,21 +342,6 @@ void ft_blob_update (void *blob, bd_t *bd) printf ("ft_blob_update(): cannot find /localbus node " "err:%s\n", fdt_strerror (nodeoffset)); } - /* MAC Adresse */ - nodeoffset = fdt_path_offset (blob, "/soc/cpm/ethernet"); - if (nodeoffset >= 0) { - uchar ethaddr[6]; - eth_getenv_enetaddr("ethaddr", ethaddr); - ret = fdt_setprop (blob, nodeoffset, "mac-address", ethaddr, - sizeof (uchar) * 6); - if (ret < 0) - printf ("ft_blob_update): cannot set /soc/cpm/ethernet/mac-address " - "property err:%s\n", fdt_strerror (ret)); - } else { - /* memory node is required in dts */ - printf ("ft_blob_update(): cannot find /soc/cpm/ethernet node " - "err:%s\n", fdt_strerror (nodeoffset)); - } /* baudrate */ nodeoffset = fdt_path_offset (blob, "/soc/cpm/serial"); diff --git a/board/netstal/hcu4/hcu4.c b/board/netstal/hcu4/hcu4.c index aa8a0975c..40bec8edc 100644 --- a/board/netstal/hcu4/hcu4.c +++ b/board/netstal/hcu4/hcu4.c @@ -92,7 +92,7 @@ int checkboard (void) u16 index = boardVersReg & 0x0f; /* Cannot be done in board_early_init */ - mtdcr(cntrl0, CPC0_CR0_VALUE); + mtdcr(CPC0_CR0, CPC0_CR0_VALUE); /* Force /RTS to active. The board it not wired quite * correctly to use cts/rtc flow control, so just force the diff --git a/board/netstal/hcu5/hcu5.c b/board/netstal/hcu5/hcu5.c index 5eb33d37f..836c0346d 100644 --- a/board/netstal/hcu5/hcu5.c +++ b/board/netstal/hcu5/hcu5.c @@ -94,8 +94,8 @@ int board_early_init_f(void) } mtsdr(SDR0_CP440, 0x0EAAEA02); /* [Nto1] = 1*/ #endif - mtdcr(ebccfga, xbcfg); - mtdcr(ebccfgd, 0xb8400000); + mtdcr(EBC0_CFGADDR, EBC0_CFG); + mtdcr(EBC0_CFGDATA, 0xb8400000); /* * Setup the GPIO pins @@ -152,8 +152,8 @@ int board_early_init_f(void) mtdcr(uic2tr, 0x00000000); /* per ref-board manual */ mtdcr(uic2vr, 0x00000000); /* int31 highest, base=0x000 */ mtdcr(uic2sr, 0xffffffff); /* clear all */ - mtsdr(sdr_pfc0, 0x00003E00); /* Pin function: */ - mtsdr(sdr_pfc1, 0x00848000); /* Pin function: UART0 has 4 pins */ + mtsdr(SDR0_PFC0, 0x00003E00); /* Pin function: */ + mtsdr(SDR0_PFC1, 0x00848000); /* Pin function: UART0 has 4 pins */ /* setup BOOT FLASH */ mtsdr(SDR0_CUST0, 0xC0082350); @@ -324,7 +324,7 @@ int board_with_pci(void) { u32 reg; - mfsdr(sdr_pci0, reg); + mfsdr(SDR0_PCI0, reg); return (reg & SDR0_XCR_PAE_MASK); } @@ -350,28 +350,28 @@ int pci_pre_init(struct pci_controller *hose) * Set priority for all PLB3 devices to 0. * Set PLB3 arbiter to fair mode. */ - mfsdr(sdr_amp1, addr); - mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00); - addr = mfdcr(plb3_acr); - mtdcr(plb3_acr, addr | 0x80000000); /* Sequoia */ + mfsdr(SD0_AMP1, addr); + mtsdr(SD0_AMP1, (addr & 0x000000FF) | 0x0000FF00); + addr = mfdcr(PLB3_ACR); + mtdcr(PLB3_ACR, addr | 0x80000000); /* Sequoia */ /* * Set priority for all PLB4 devices to 0. */ - mfsdr(sdr_amp0, addr); - mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00); - addr = mfdcr(plb4_acr) | 0xa0000000; /* Was 0x8---- */ - mtdcr(plb4_acr, addr); /* Sequoia */ + mfsdr(SD0_AMP0, addr); + mtsdr(SD0_AMP0, (addr & 0x000000FF) | 0x0000FF00); + addr = mfdcr(PLB4_ACR) | 0xa0000000; /* Was 0x8---- */ + mtdcr(PLB4_ACR, addr); /* Sequoia */ /* * As of errata version 0.4, CHIP_8: Incorrect Write to DDR SDRAM. * Workaround: Disable write pipelining to DDR SDRAM by setting * PLB0_ACR[WRP] = 0. */ - mtdcr(plb0_acr, 0); /* PATCH HAB: WRITE PIPELINING OFF */ + mtdcr(PLB0_ACR, 0); /* PATCH HAB: WRITE PIPELINING OFF */ /* Segment1 */ - mtdcr(plb1_acr, 0); /* PATCH HAB: WRITE PIPELINING OFF */ + mtdcr(PLB1_ACR, 0); /* PATCH HAB: WRITE PIPELINING OFF */ return board_with_pci(); } diff --git a/board/netstal/hcu5/sdram.c b/board/netstal/hcu5/sdram.c index 5c2ec3563..0546cd726 100644 --- a/board/netstal/hcu5/sdram.c +++ b/board/netstal/hcu5/sdram.c @@ -89,11 +89,11 @@ static int wait_for_dlllock(void) /* -----------------------------------------------------------+ * Wait for the DCC master delay line to finish calibration * ----------------------------------------------------------*/ - mtdcr(memcfga, DDR0_17); + mtdcr(SDRAM0_CFGADDR, DDR0_17); val = DDR0_17_DLLLOCKREG_UNLOCKED; while (wait != 0xffff) { - val = mfdcr(memcfgd); + val = mfdcr(SDRAM0_CFGDATA); if ((val & DDR0_17_DLLLOCKREG_MASK) == DDR0_17_DLLLOCKREG_LOCKED) /* dlllockreg bit on */ diff --git a/board/netstal/mcu25/mcu25.c b/board/netstal/mcu25/mcu25.c index 67c1b0bbe..9054282c9 100644 --- a/board/netstal/mcu25/mcu25.c +++ b/board/netstal/mcu25/mcu25.c @@ -71,8 +71,8 @@ int board_early_init_f (void) mtdcr(uictr, 0x00000000); /* set int trigger levels */ mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ - mtdcr(cntrl1, CPC0_CR1_VALUE); - mtdcr(ecr, 0x60606000); + mtdcr(CPC0_CR1, CPC0_CR1_VALUE); + mtdcr(CPC0_ECR, 0x60606000); mtdcr(CPC0_EIRR, 0x7C000000); out32(GPIO0_OR, CONFIG_SYS_GPIO0_OR ); out32(GPIO0_TCR, CONFIG_SYS_GPIO0_TCR); @@ -103,7 +103,7 @@ int checkboard (void) u16 index = boardVersReg & 0xf0; /* Cannot be done in board_early_init */ - mtdcr(cntrl0, CPC0_CR0_VALUE); + mtdcr(CPC0_CR0, CPC0_CR0_VALUE); /* Force /RTS to active. The board it not wired quite * correctly to use cts/rtc flow control, so just force the diff --git a/board/pcs440ep/pcs440ep.c b/board/pcs440ep/pcs440ep.c index 47d639146..f966d02f1 100644 --- a/board/pcs440ep/pcs440ep.c +++ b/board/pcs440ep/pcs440ep.c @@ -143,9 +143,9 @@ int board_early_init_f(void) /*-------------------------------------------------------------------- * Setup the external bus controller/chip selects *-------------------------------------------------------------------*/ - mtdcr(ebccfga, xbcfg); - reg = mfdcr(ebccfgd); - mtdcr(ebccfgd, reg | 0x04000000); /* Set ATC */ + mtdcr(EBC0_CFGADDR, EBC0_CFG); + reg = mfdcr(EBC0_CFGDATA); + mtdcr(EBC0_CFGDATA, reg | 0x04000000); /* Set ATC */ /*-------------------------------------------------------------------- * GPIO's are alreay setup in cpu/ppc4xx/cpu_init.c @@ -174,10 +174,10 @@ int board_early_init_f(void) /*-------------------------------------------------------------------- * Setup other serial configuration *-------------------------------------------------------------------*/ - mfsdr(sdr_pci0, reg); - mtsdr(sdr_pci0, 0x80000000 | reg); /* PCI arbiter enabled */ - mtsdr(sdr_pfc0, 0x00000000); /* Pin function: enable GPIO49-63 */ - mtsdr(sdr_pfc1, 0x00048000); /* Pin function: UART0 has 4 pins, select IRQ5 */ + mfsdr(SDR0_PCI0, reg); + mtsdr(SDR0_PCI0, 0x80000000 | reg); /* PCI arbiter enabled */ + mtsdr(SDR0_PFC0, 0x00000000); /* Pin function: enable GPIO49-63 */ + mtsdr(SDR0_PFC1, 0x00048000); /* Pin function: UART0 has 4 pins, select IRQ5 */ return 0; } @@ -444,8 +444,8 @@ int misc_init_r (void) load_ethaddr(); /* Re-do sizing to get full correct info */ - mtdcr(ebccfga, pb0cr); - pbcr = mfdcr(ebccfgd); + mtdcr(EBC0_CFGADDR, PB0CR); + pbcr = mfdcr(EBC0_CFGDATA); switch (gd->bd->bi_flashsize) { case 1 << 20: size_val = 0; @@ -473,8 +473,8 @@ int misc_init_r (void) break; } pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17); - mtdcr(ebccfga, pb0cr); - mtdcr(ebccfgd, pbcr); + mtdcr(EBC0_CFGADDR, PB0CR); + mtdcr(EBC0_CFGDATA, pbcr); /* adjust flash start and offset */ gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize; @@ -571,35 +571,35 @@ int pci_pre_init(struct pci_controller *hose) | Set priority for all PLB3 devices to 0. | Set PLB3 arbiter to fair mode. +-------------------------------------------------------------------------*/ - mfsdr(sdr_amp1, addr); - mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00); - addr = mfdcr(plb3_acr); - mtdcr(plb3_acr, addr | 0x80000000); + mfsdr(SD0_AMP1, addr); + mtsdr(SD0_AMP1, (addr & 0x000000FF) | 0x0000FF00); + addr = mfdcr(PLB3_ACR); + mtdcr(PLB3_ACR, addr | 0x80000000); /*-------------------------------------------------------------------------+ | Set priority for all PLB4 devices to 0. +-------------------------------------------------------------------------*/ - mfsdr(sdr_amp0, addr); - mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00); - addr = mfdcr(plb4_acr) | 0xa0000000; /* Was 0x8---- */ - mtdcr(plb4_acr, addr); + mfsdr(SD0_AMP0, addr); + mtsdr(SD0_AMP0, (addr & 0x000000FF) | 0x0000FF00); + addr = mfdcr(PLB4_ACR) | 0xa0000000; /* Was 0x8---- */ + mtdcr(PLB4_ACR, addr); /*-------------------------------------------------------------------------+ | Set Nebula PLB4 arbiter to fair mode. +-------------------------------------------------------------------------*/ /* Segment0 */ - addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair; - addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled; - addr = (addr & ~plb0_acr_rdp_mask) | plb0_acr_rdp_4deep; - addr = (addr & ~plb0_acr_wrp_mask) | plb0_acr_wrp_2deep; - mtdcr(plb0_acr, addr); + addr = (mfdcr(PLB0_ACR) & ~PLB0_ACR_PPM_MASK) | PLB0_ACR_PPM_FAIR; + addr = (addr & ~PLB0_ACR_HBU_MASK) | PLB0_ACR_HBU_ENABLED; + addr = (addr & ~PLB0_ACR_RDP_MASK) | PLB0_ACR_RDP_4DEEP; + addr = (addr & ~PLB0_ACR_WRP_MASK) | PLB0_ACR_WRP_2DEEP; + mtdcr(PLB0_ACR, addr); /* Segment1 */ - addr = (mfdcr(plb1_acr) & ~plb1_acr_ppm_mask) | plb1_acr_ppm_fair; - addr = (addr & ~plb1_acr_hbu_mask) | plb1_acr_hbu_enabled; - addr = (addr & ~plb1_acr_rdp_mask) | plb1_acr_rdp_4deep; - addr = (addr & ~plb1_acr_wrp_mask) | plb1_acr_wrp_2deep; - mtdcr(plb1_acr, addr); + addr = (mfdcr(PLB1_ACR) & ~PLB1_ACR_PPM_MASK) | PLB1_ACR_PPM_FAIR; + addr = (addr & ~PLB1_ACR_HBU_MASK) | PLB1_ACR_HBU_ENABLED; + addr = (addr & ~PLB1_ACR_RDP_MASK) | PLB1_ACR_RDP_4DEEP; + addr = (addr & ~PLB1_ACR_WRP_MASK) | PLB1_ACR_WRP_2DEEP; + mtdcr(PLB1_ACR, addr); return 1; } diff --git a/board/prodrive/alpr/alpr.c b/board/prodrive/alpr/alpr.c index dc3431961..be79b42bd 100644 --- a/board/prodrive/alpr/alpr.c +++ b/board/prodrive/alpr/alpr.c @@ -39,7 +39,7 @@ int board_early_init_f (void) /*------------------------------------------------------------------------- * Initialize EBC CONFIG *-------------------------------------------------------------------------*/ - mtebc(xbcfg, EBC_CFG_LE_UNLOCK | + mtebc(EBC0_CFG, EBC_CFG_LE_UNLOCK | EBC_CFG_PTD_DISABLE | EBC_CFG_RTC_64PERCLK | EBC_CFG_ATC_PREVIOUS | EBC_CFG_DTC_PREVIOUS | EBC_CFG_CTC_PREVIOUS | EBC_CFG_EMC_NONDEFAULT | @@ -96,7 +96,7 @@ int board_early_init_f (void) out32(GPIO0_ODR, in32(GPIO0_ODR) & ~(CONFIG_SYS_GPIO_SHUTDOWN | CONFIG_SYS_GPIO_SSD_EMPTY)); /* Setup GPIO/IRQ multiplexing */ - mtsdr(sdr_pfc0, 0x01a33e00); + mtsdr(SDR0_PFC0, 0x01a33e00); return 0; } @@ -165,7 +165,7 @@ int pci_pre_init(struct pci_controller * hose ) * The ocotea board is always configured as the host & requires the * PCI arbiter to be enabled. *--------------------------------------------------------------------------*/ - mfsdr(sdr_sdstp1, strap); + mfsdr(SDR0_SDSTP1, strap); if( (strap & SDR0_SDSTP1_PAE_MASK) == 0 ){ printf("PCI: SDR0_STRP1[%08lX] - PCI Arbiter disabled.\n",strap); return 0; diff --git a/board/prodrive/p3p440/p3p440.c b/board/prodrive/p3p440/p3p440.c index 1a0486f5c..18054e45b 100644 --- a/board/prodrive/p3p440/p3p440.c +++ b/board/prodrive/p3p440/p3p440.c @@ -85,14 +85,14 @@ int board_early_init_f(void) /*-------------------------------------------------------------------- * Setup the external bus controller/chip selects *-------------------------------------------------------------------*/ - mtdcr(ebccfga, xbcfg); - reg = mfdcr(ebccfgd); - mtdcr(ebccfgd, reg | 0x04000000); /* Set ATC */ + mtdcr(EBC0_CFGADDR, EBC0_CFG); + reg = mfdcr(EBC0_CFGDATA); + mtdcr(EBC0_CFGDATA, reg | 0x04000000); /* Set ATC */ /*-------------------------------------------------------------------- * Setup pin multiplexing (GPIO/IRQ...) *-------------------------------------------------------------------*/ - mtdcr(cpc0_gpio, 0x03F01F80); + mtdcr(CPC0_GPIO, 0x03F01F80); out32(GPIO0_ODR, 0x00000000); /* no open drain pins */ out32(GPIO0_TCR, CONFIG_SYS_GPIO_RDY | CONFIG_SYS_EREADY_IO | CONFIG_SYS_LED_RED | CONFIG_SYS_LED_GREEN); @@ -153,12 +153,12 @@ int misc_init_r (void) * Check if only one FLASH bank is available */ if (gd->bd->bi_flashsize != CONFIG_SYS_MAX_FLASH_BANKS * (0 - CONFIG_SYS_FLASH0)) { - mtebc(pb1cr, 0); /* disable cs */ - mtebc(pb1ap, 0); - mtebc(pb2cr, 0); /* disable cs */ - mtebc(pb2ap, 0); - mtebc(pb3cr, 0); /* disable cs */ - mtebc(pb3ap, 0); + mtebc(PB1CR, 0); /* disable cs */ + mtebc(PB1AP, 0); + mtebc(PB2CR, 0); /* disable cs */ + mtebc(PB2AP, 0); + mtebc(PB3CR, 0); /* disable cs */ + mtebc(PB3AP, 0); } return 0; @@ -185,7 +185,7 @@ int pci_pre_init(struct pci_controller *hose) * The P3P440 board is always configured as the host & requires the * PCI arbiter to be disabled because it's an PMC module. *--------------------------------------------------------------------------*/ - strap = mfdcr(cpc0_strp1); + strap = mfdcr(CPC0_STRP1); if (strap & 0x00100000) { printf("PCI: CPC0_STRP1[PAE] set.\n"); return 0; diff --git a/board/sandburst/common/sb_common.c b/board/sandburst/common/sb_common.c index b8160c842..d8b0564b3 100644 --- a/board/sandburst/common/sb_common.c +++ b/board/sandburst/common/sb_common.c @@ -322,7 +322,7 @@ int pci_pre_init(struct pci_controller * hose ) * The metrobox is always configured as the host & requires the * PCI arbiter to be enabled. *--------------------------------------------------------------------------*/ - mfsdr(sdr_sdstp1, strap); + mfsdr(SDR0_SDSTP1, strap); if( (strap & SDR0_SDSTP1_PAE_MASK) == 0 ){ printf("PCI: SDR0_STRP1[%08lX] - PCI Arbiter disabled.\n",strap); return 0; diff --git a/board/sandburst/karef/karef.c b/board/sandburst/karef/karef.c index 92f524756..b80c20694 100644 --- a/board/sandburst/karef/karef.c +++ b/board/sandburst/karef/karef.c @@ -67,7 +67,7 @@ int board_early_init_f (void) ppc440_gpio_regs_t *gpio_regs; /* Enable GPIO interrupts */ - mtsdr(sdr_pfc0, 0x00103E00); + mtsdr(SDR0_PFC0, 0x00103E00); /* Setup access for LEDs, and system topology info */ gpio_regs = (ppc440_gpio_regs_t *)CONFIG_SYS_GPIO_BASE; @@ -80,7 +80,7 @@ int board_early_init_f (void) /*--------------------------------------------------------------------+ | Initialize EBC CONFIG +-------------------------------------------------------------------*/ - mtebc(xbcfg, + mtebc(EBC0_CFG, EBC_CFG_LE_UNLOCK | EBC_CFG_PTD_ENABLE | EBC_CFG_RTC_64PERCLK | EBC_CFG_ATC_PREVIOUS | EBC_CFG_DTC_PREVIOUS | EBC_CFG_CTC_PREVIOUS | @@ -90,7 +90,7 @@ int board_early_init_f (void) /*--------------------------------------------------------------------+ | 1/2 MB FLASH. Initialize bank 0 with default values. +-------------------------------------------------------------------*/ - mtebc(pb0ap, + mtebc(PB0AP, EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(8) | EBC_BXAP_BCE_DISABLE | EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1) | @@ -98,12 +98,12 @@ int board_early_init_f (void) EBC_BXAP_RE_DISABLED | EBC_BXAP_BEM_WRITEONLY | EBC_BXAP_PEN_DISABLED); - mtebc(pb0cr, EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FLASH_BASE) | + mtebc(PB0CR, EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FLASH_BASE) | EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_8BIT); /*--------------------------------------------------------------------+ | 8KB NVRAM/RTC. Initialize bank 1 with default values. +-------------------------------------------------------------------*/ - mtebc(pb1ap, + mtebc(PB1AP, EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(10) | EBC_BXAP_BCE_DISABLE | EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1) | @@ -111,13 +111,13 @@ int board_early_init_f (void) EBC_BXAP_RE_DISABLED | EBC_BXAP_BEM_WRITEONLY | EBC_BXAP_PEN_DISABLED); - mtebc(pb1cr, EBC_BXCR_BAS_ENCODE(0x48000000) | + mtebc(PB1CR, EBC_BXCR_BAS_ENCODE(0x48000000) | EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_8BIT); /*--------------------------------------------------------------------+ | Compact Flash, uses 2 Chip Selects (2 & 6) +-------------------------------------------------------------------*/ - mtebc(pb2ap, + mtebc(PB2AP, EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(8) | EBC_BXAP_BCE_DISABLE | EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1) | @@ -125,40 +125,40 @@ int board_early_init_f (void) EBC_BXAP_RE_DISABLED | EBC_BXAP_BEM_WRITEONLY | EBC_BXAP_PEN_DISABLED); - mtebc(pb2cr, EBC_BXCR_BAS_ENCODE(0xF0000000) | + mtebc(PB2CR, EBC_BXCR_BAS_ENCODE(0xF0000000) | EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_16BIT); /*--------------------------------------------------------------------+ | KaRef Scan FPGA. Initialize bank 3 with default values. +-------------------------------------------------------------------*/ - mtebc(pb5ap, + mtebc(PB5AP, EBC_BXAP_RE_ENABLED | EBC_BXAP_SOR_NONDELAYED | EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(3) | EBC_BXAP_TH_ENCODE(1) | EBC_BXAP_WBF_ENCODE(0) | EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_PEN_DISABLED | EBC_BXAP_OEN_ENCODE(1) | EBC_BXAP_BEM_RW); - mtebc(pb5cr, EBC_BXCR_BAS_ENCODE(0x48200000) | + mtebc(PB5CR, EBC_BXCR_BAS_ENCODE(0x48200000) | EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT); /*--------------------------------------------------------------------+ | MAC A & B for Kamino. OFEM FPGA decodes the addresses | Initialize bank 4 with default values. +-------------------------------------------------------------------*/ - mtebc(pb4ap, + mtebc(PB4AP, EBC_BXAP_RE_ENABLED | EBC_BXAP_SOR_NONDELAYED | EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(3) | EBC_BXAP_TH_ENCODE(1) | EBC_BXAP_WBF_ENCODE(0) | EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_PEN_DISABLED | EBC_BXAP_OEN_ENCODE(1) | EBC_BXAP_BEM_RW); - mtebc(pb4cr, EBC_BXCR_BAS_ENCODE(0x48600000) | + mtebc(PB4CR, EBC_BXCR_BAS_ENCODE(0x48600000) | EBC_BXCR_BS_2MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT); /*--------------------------------------------------------------------+ | OFEM FPGA Initialize bank 5 with default values. +-------------------------------------------------------------------*/ - mtebc(pb3ap, + mtebc(PB3AP, EBC_BXAP_RE_ENABLED | EBC_BXAP_SOR_NONDELAYED | EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(3) | EBC_BXAP_TH_ENCODE(1) | EBC_BXAP_WBF_ENCODE(0) | @@ -166,14 +166,14 @@ int board_early_init_f (void) EBC_BXAP_OEN_ENCODE(1) | EBC_BXAP_BEM_RW); - mtebc(pb3cr, EBC_BXCR_BAS_ENCODE(0x48400000) | + mtebc(PB3CR, EBC_BXCR_BAS_ENCODE(0x48400000) | EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT); /*--------------------------------------------------------------------+ | Compact Flash, uses 2 Chip Selects (2 & 6) +-------------------------------------------------------------------*/ - mtebc(pb6ap, + mtebc(PB6AP, EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(8) | EBC_BXAP_BCE_DISABLE | EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1) | @@ -181,20 +181,20 @@ int board_early_init_f (void) EBC_BXAP_RE_DISABLED | EBC_BXAP_BEM_WRITEONLY | EBC_BXAP_PEN_DISABLED); - mtebc(pb6cr, EBC_BXCR_BAS_ENCODE(0xF0100000) | + mtebc(PB6CR, EBC_BXCR_BAS_ENCODE(0xF0100000) | EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_16BIT); /*--------------------------------------------------------------------+ | BME-32. Initialize bank 7 with default values. +-------------------------------------------------------------------*/ - mtebc(pb7ap, + mtebc(PB7AP, EBC_BXAP_RE_ENABLED | EBC_BXAP_SOR_NONDELAYED | EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(3) | EBC_BXAP_TH_ENCODE(1) | EBC_BXAP_WBF_ENCODE(0) | EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_PEN_DISABLED | EBC_BXAP_OEN_ENCODE(1) | EBC_BXAP_BEM_RW); - mtebc(pb7cr, EBC_BXCR_BAS_ENCODE(0x48500000) | + mtebc(PB7CR, EBC_BXCR_BAS_ENCODE(0x48500000) | EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT); /*--------------------------------------------------------------------+ diff --git a/board/sandburst/metrobox/metrobox.c b/board/sandburst/metrobox/metrobox.c index 27d7f7408..ad3f9bc28 100644 --- a/board/sandburst/metrobox/metrobox.c +++ b/board/sandburst/metrobox/metrobox.c @@ -57,7 +57,7 @@ int board_early_init_f (void) ppc440_gpio_regs_t *gpio_regs; /* Enable GPIO interrupts */ - mtsdr(sdr_pfc0, 0x00103E00); + mtsdr(SDR0_PFC0, 0x00103E00); /* Setup access for LEDs, and system topology info */ gpio_regs = (ppc440_gpio_regs_t *)CONFIG_SYS_GPIO_BASE; @@ -70,7 +70,7 @@ int board_early_init_f (void) /*--------------------------------------------------------------------+ | Initialize EBC CONFIG +-------------------------------------------------------------------*/ - mtebc(xbcfg, + mtebc(EBC0_CFG, EBC_CFG_LE_UNLOCK | EBC_CFG_PTD_ENABLE | EBC_CFG_RTC_64PERCLK | EBC_CFG_ATC_PREVIOUS | EBC_CFG_DTC_PREVIOUS | EBC_CFG_CTC_PREVIOUS | @@ -80,7 +80,7 @@ int board_early_init_f (void) /*--------------------------------------------------------------------+ | 1/2 MB FLASH. Initialize bank 0 with default values. +-------------------------------------------------------------------*/ - mtebc(pb0ap, + mtebc(PB0AP, EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(8) | EBC_BXAP_BCE_DISABLE | EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1) | @@ -88,12 +88,12 @@ int board_early_init_f (void) EBC_BXAP_RE_DISABLED | EBC_BXAP_BEM_WRITEONLY | EBC_BXAP_PEN_DISABLED); - mtebc(pb0cr, EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FLASH_BASE) | + mtebc(PB0CR, EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FLASH_BASE) | EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_8BIT); /*--------------------------------------------------------------------+ | 8KB NVRAM/RTC. Initialize bank 1 with default values. +-------------------------------------------------------------------*/ - mtebc(pb1ap, + mtebc(PB1AP, EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(10) | EBC_BXAP_BCE_DISABLE | EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1) | @@ -101,13 +101,13 @@ int board_early_init_f (void) EBC_BXAP_RE_DISABLED | EBC_BXAP_BEM_WRITEONLY | EBC_BXAP_PEN_DISABLED); - mtebc(pb1cr, EBC_BXCR_BAS_ENCODE(0x48000000) | + mtebc(PB1CR, EBC_BXCR_BAS_ENCODE(0x48000000) | EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_8BIT); /*--------------------------------------------------------------------+ | Compact Flash, uses 2 Chip Selects (2 & 6) +-------------------------------------------------------------------*/ - mtebc(pb2ap, + mtebc(PB2AP, EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(8) | EBC_BXAP_BCE_DISABLE | EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1) | @@ -115,20 +115,20 @@ int board_early_init_f (void) EBC_BXAP_RE_DISABLED | EBC_BXAP_BEM_WRITEONLY | EBC_BXAP_PEN_DISABLED); - mtebc(pb2cr, EBC_BXCR_BAS_ENCODE(0xF0000000) | + mtebc(PB2CR, EBC_BXCR_BAS_ENCODE(0xF0000000) | EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_16BIT); /*--------------------------------------------------------------------+ | OPTO & OFEM FPGA. Initialize bank 3 with default values. +-------------------------------------------------------------------*/ - mtebc(pb3ap, + mtebc(PB3AP, EBC_BXAP_RE_ENABLED | EBC_BXAP_SOR_NONDELAYED | EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(3) | EBC_BXAP_TH_ENCODE(1) | EBC_BXAP_WBF_ENCODE(0) | EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_PEN_DISABLED | EBC_BXAP_OEN_ENCODE(1) | EBC_BXAP_BEM_RW); - mtebc(pb3cr, EBC_BXCR_BAS_ENCODE(0x48200000) | + mtebc(PB3CR, EBC_BXCR_BAS_ENCODE(0x48200000) | EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT); /*--------------------------------------------------------------------+ @@ -136,34 +136,34 @@ int board_early_init_f (void) | MAC A & B for Kamino. OFEM FPGA decodes the addresses | Initialize bank 4 with default values. +-------------------------------------------------------------------*/ - mtebc(pb4ap, + mtebc(PB4AP, EBC_BXAP_RE_ENABLED | EBC_BXAP_SOR_NONDELAYED | EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(3) | EBC_BXAP_TH_ENCODE(1) | EBC_BXAP_WBF_ENCODE(0) | EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_PEN_DISABLED | EBC_BXAP_OEN_ENCODE(1) | EBC_BXAP_BEM_RW); - mtebc(pb4cr, EBC_BXCR_BAS_ENCODE(0x48600000) | + mtebc(PB4CR, EBC_BXCR_BAS_ENCODE(0x48600000) | EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT); /*--------------------------------------------------------------------+ | Metrobox MAC B Initialize bank 5 with default values. | KA REF FPGA Initialize bank 5 with default values. +-------------------------------------------------------------------*/ - mtebc(pb5ap, + mtebc(PB5AP, EBC_BXAP_RE_ENABLED | EBC_BXAP_SOR_NONDELAYED | EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(3) | EBC_BXAP_TH_ENCODE(1) | EBC_BXAP_WBF_ENCODE(0) | EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_PEN_DISABLED | EBC_BXAP_OEN_ENCODE(1) | EBC_BXAP_BEM_RW); - mtebc(pb5cr, EBC_BXCR_BAS_ENCODE(0x48700000) | + mtebc(PB5CR, EBC_BXCR_BAS_ENCODE(0x48700000) | EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT); /*--------------------------------------------------------------------+ | Compact Flash, uses 2 Chip Selects (2 & 6) +-------------------------------------------------------------------*/ - mtebc(pb6ap, + mtebc(PB6AP, EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(8) | EBC_BXAP_BCE_DISABLE | EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1) | @@ -171,20 +171,20 @@ int board_early_init_f (void) EBC_BXAP_RE_DISABLED | EBC_BXAP_BEM_WRITEONLY | EBC_BXAP_PEN_DISABLED); - mtebc(pb6cr, EBC_BXCR_BAS_ENCODE(0xF0100000) | + mtebc(PB6CR, EBC_BXCR_BAS_ENCODE(0xF0100000) | EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_16BIT); /*--------------------------------------------------------------------+ | BME-32. Initialize bank 7 with default values. +-------------------------------------------------------------------*/ - mtebc(pb7ap, + mtebc(PB7AP, EBC_BXAP_RE_ENABLED | EBC_BXAP_SOR_NONDELAYED | EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(3) | EBC_BXAP_TH_ENCODE(1) | EBC_BXAP_WBF_ENCODE(0) | EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_PEN_DISABLED | EBC_BXAP_OEN_ENCODE(1) | EBC_BXAP_BEM_RW); - mtebc(pb7cr, EBC_BXCR_BAS_ENCODE(0x48500000) | + mtebc(PB7CR, EBC_BXCR_BAS_ENCODE(0x48500000) | EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT); /*--------------------------------------------------------------------+ diff --git a/board/sbc405/sbc405.c b/board/sbc405/sbc405.c index 7818cd7e5..66842eaf4 100644 --- a/board/sbc405/sbc405.c +++ b/board/sbc405/sbc405.c @@ -52,7 +52,7 @@ int board_early_init_f (void) /* * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us */ - mtebc (epcr, 0xa8400000); + mtebc (EBC0_CFG, 0xa8400000); return 0; } diff --git a/board/sc3/init.S b/board/sc3/init.S index f97a5ea61..6052c6655 100644 --- a/board/sc3/init.S +++ b/board/sc3/init.S @@ -58,7 +58,7 @@ ext_bus_cntlr_init: * We need the current boot up configuration to set correct * timings into internal flash and external flash */ - mfdcr r24,strap /* xxxx xxxx xxxx xxx? ?xxx xxxx xxxx xxxx + mfdcr r24,CPC0_PSR /* xxxx xxxx xxxx xxx? ?xxx xxxx xxxx xxxx 0 0 -> 8 bit external ROM 0 1 -> 16 bit internal ROM */ addi r4,0,2 @@ -113,8 +113,8 @@ ext_bus_cntlr_init: * We only have to change the timing. Mapping is ok by boot-strapping *----------------------------------------------------------------------- */ - li r4,pb0ap /* PB0AP=Peripheral Bank 0 Access Parameters */ - mtdcr ebccfga,r4 + li r4,PB1AP /* PB0AP=Peripheral Bank 0 Access Parameters */ + mtdcr EBC0_CFGADDR,r4 mr r4,r26 /* assume internal fast flash is boot flash */ cmpwi r24,0x2000 /* assumption true? ... */ @@ -122,27 +122,27 @@ ext_bus_cntlr_init: mr r4,r25 /* ...no, use the slow variant */ mr r25,r26 /* use this for the other flash */ 1: - mtdcr ebccfgd,r4 /* change timing now */ + mtdcr EBC0_CFGDATA,r4 /* change timing now */ - li r4,pb0cr /* PB0CR=Peripheral Bank 0 Control Register */ - mtdcr ebccfga,r4 - mfdcr r4,ebccfgd + li r4,PB0CR /* PB0CR=Peripheral Bank 0 Control Register */ + mtdcr EBC0_CFGADDR,r4 + mfdcr r4,EBC0_CFGDATA lis r3,0x0001 ori r3,r3,0x8000 /* allow reads and writes */ or r4,r4,r3 - mtdcr ebccfgd,r4 + mtdcr EBC0_CFGDATA,r4 /*----------------------------------------------------------------------- * Memory Bank 3 (Second-Flash) initialization * 0xF0000000...0xF01FFFFF -> 2MB *----------------------------------------------------------------------- */ - li r4,pb3ap /* Peripheral Bank 1 Access Parameter */ - mtdcr ebccfga,r4 - mtdcr ebccfgd,r2 /* change timing */ + li r4,PB3AP /* Peripheral Bank 1 Access Parameter */ + mtdcr EBC0_CFGADDR,r4 + mtdcr EBC0_CFGDATA,r2 /* change timing */ - li r4,pb3cr /* Peripheral Bank 1 Configuration Registers */ - mtdcr ebccfga,r4 + li r4,PB3CR /* Peripheral Bank 1 Configuration Registers */ + mtdcr EBC0_CFGADDR,r4 lis r4,0xF003 ori r4,r4,0x8000 @@ -151,7 +151,7 @@ ext_bus_cntlr_init: */ xori r24,r24,0x2000 /* invert current bus width */ or r4,r4,r24 - mtdcr ebccfgd,r4 + mtdcr EBC0_CFGDATA,r4 /*----------------------------------------------------------------------- * Memory Bank 1 (NAND-Flash) initialization @@ -169,28 +169,28 @@ ext_bus_cntlr_init: * ----> 2 clocks per cycle = 60ns cycle (30ns active, 30ns hold) *----------------------------------------------------------------------- */ - li r4,pb1ap /* Peripheral Bank 1 Access Parameter */ - mtdcr ebccfga,r4 + li r4,PB1AP /* Peripheral Bank 1 Access Parameter */ + mtdcr EBC0_CFGADDR,r4 lis r4,0x0000 ori r4,r4,0x0200 - mtdcr ebccfgd,r4 + mtdcr EBC0_CFGDATA,r4 - li r4,pb1cr /* Peripheral Bank 1 Configuration Registers */ - mtdcr ebccfga,r4 + li r4,PB1CR /* Peripheral Bank 1 Configuration Registers */ + mtdcr EBC0_CFGADDR,r4 lis r4,0x77D1 ori r4,r4,0x8000 - mtdcr ebccfgd,r4 + mtdcr EBC0_CFGDATA,r4 /* USB init (without acceleration) */ #ifndef CONFIG_ISP1161_PRESENT - li r4,pb4ap /* PB4AP=Peripheral Bank 4 Access Parameters */ - mtdcr ebccfga,r4 + li r4,PB4AP /* PB4AP=Peripheral Bank 4 Access Parameters */ + mtdcr EBC0_CFGADDR,r4 lis r4,0x0180 ori r4,r4,0x5940 - mtdcr ebccfgd,r4 + mtdcr EBC0_CFGDATA,r4 #endif /*----------------------------------------------------------------------- @@ -204,8 +204,8 @@ ext_bus_cntlr_init: A7/A24=0 -> memory cycle A7/ /A24=1 -> I/O cycle */ - li r4,pb2ap /* PB2AP=Peripheral Bank 2 Access Parameters */ - mtdcr ebccfga,r4 + li r4,PB2AP /* PB2AP=Peripheral Bank 2 Access Parameters */ + mtdcr EBC0_CFGADDR,r4 /* We emulate an ISA access @@ -226,58 +226,58 @@ ext_bus_cntlr_init: lis r4,0x0100 ori r4,r4,0x0340 #endif - mtdcr ebccfgd,r4 + mtdcr EBC0_CFGDATA,r4 #ifdef IDE_USES_ISA_EMULATION - li r25,pb5ap /* PB5AP=Peripheral Bank 5 Access Parameters */ - mtdcr ebccfga,r25 - mtdcr ebccfgd,r4 + li r25,PB5AP /* PB5AP=Peripheral Bank 5 Access Parameters */ + mtdcr EBC0_CFGADDR,r25 + mtdcr EBC0_CFGDATA,r4 #endif - li r25,pb6ap /* PB6AP=Peripheral Bank 6 Access Parameters */ - mtdcr ebccfga,r25 - mtdcr ebccfgd,r4 - li r25,pb7ap /* PB7AP=Peripheral Bank 7 Access Parameters */ - mtdcr ebccfga,r25 - mtdcr ebccfgd,r4 + li r25,PB6AP /* PB6AP=Peripheral Bank 6 Access Parameters */ + mtdcr EBC0_CFGADDR,r25 + mtdcr EBC0_CFGDATA,r4 + li r25,PB7AP /* PB7AP=Peripheral Bank 7 Access Parameters */ + mtdcr EBC0_CFGADDR,r25 + mtdcr EBC0_CFGDATA,r4 - li r25,pb2cr /* PB2CR=Peripheral Bank 2 Configuration Register */ - mtdcr ebccfga,r25 + li r25,PB2CR /* PB2CR=Peripheral Bank 2 Configuration Register */ + mtdcr EBC0_CFGADDR,r25 lis r4,0x780B ori r4,r4,0xA000 - mtdcr ebccfgd,r4 + mtdcr EBC0_CFGDATA,r4 /* * the other areas are only 1MiB in size */ lis r4,0x7401 ori r4,r4,0xA000 - li r25,pb6cr /* PB6CR=Peripheral Bank 6 Configuration Register */ - mtdcr ebccfga,r25 + li r25,PB6CR /* PB6CR=Peripheral Bank 6 Configuration Register */ + mtdcr EBC0_CFGADDR,r25 lis r4,0x7401 ori r4,r4,0xA000 - mtdcr ebccfgd,r4 + mtdcr EBC0_CFGDATA,r4 - li r25,pb7cr /* PB7CR=Peripheral Bank 7 Configuration Register */ - mtdcr ebccfga,r25 + li r25,PB7CR /* PB7CR=Peripheral Bank 7 Configuration Register */ + mtdcr EBC0_CFGADDR,r25 lis r4,0x7411 ori r4,r4,0xA000 - mtdcr ebccfgd,r4 + mtdcr EBC0_CFGDATA,r4 #ifndef CONFIG_ISP1161_PRESENT - li r25,pb4cr /* PB4CR=Peripheral Bank 4 Configuration Register */ - mtdcr ebccfga,r25 + li r25,PB4CR /* PB4CR=Peripheral Bank 4 Configuration Register */ + mtdcr EBC0_CFGADDR,r25 lis r4,0x7421 ori r4,r4,0xA000 - mtdcr ebccfgd,r4 + mtdcr EBC0_CFGDATA,r4 #endif #ifdef IDE_USES_ISA_EMULATION - li r25,pb5cr /* PB5CR=Peripheral Bank 5 Configuration Register */ - mtdcr ebccfga,r25 + li r25,PB5CR /* PB5CR=Peripheral Bank 5 Configuration Register */ + mtdcr EBC0_CFGADDR,r25 lis r4,0x0000 ori r4,r4,0x0000 - mtdcr ebccfgd,r4 + mtdcr EBC0_CFGDATA,r4 #endif /*----------------------------------------------------------------------- @@ -315,19 +315,19 @@ ext_bus_cntlr_init: #ifdef CONFIG_ISP1161_PRESENT - li r4,pb4ap /* PB4AP=Peripheral Bank 4 Access Parameters */ - mtdcr ebccfga,r4 + li r4,PB4AP /* PB4AP=Peripheral Bank 4 Access Parameters */ + mtdcr EBC0_CFGADDR,r4 lis r4,0x030D ori r4,r4,0x5E80 - mtdcr ebccfgd,r4 + mtdcr EBC0_CFGDATA,r4 - li r4,pb4cr /* PB2CR=Peripheral Bank 4 Configuration Register */ - mtdcr ebccfga,r4 + li r4,PB4CR /* PB2CR=Peripheral Bank 4 Configuration Register */ + mtdcr EBC0_CFGADDR,r4 lis r4,0x77C1 ori r4,r4,0xA000 - mtdcr ebccfgd,r4 + mtdcr EBC0_CFGDATA,r4 #endif @@ -352,28 +352,28 @@ ext_bus_cntlr_init: * *----------------------------------------------------------------------- */ - li r4,pb5ap - mtdcr ebccfga,r4 + li r4,PB5AP + mtdcr EBC0_CFGADDR,r4 lis r4,0x040C ori r4,r4,0x0200 - mtdcr ebccfgd,r4 + mtdcr EBC0_CFGDATA,r4 - li r4,pb5cr /* PB2CR=Peripheral Bank 2 Configuration Register */ - mtdcr ebccfga,r4 + li r4,PB5CR /* PB2CR=Peripheral Bank 2 Configuration Register */ + mtdcr EBC0_CFGADDR,r4 lis r4,0x7A01 ori r4,r4,0xA000 - mtdcr ebccfgd,r4 + mtdcr EBC0_CFGDATA,r4 #endif /* * External Peripheral Control Register */ - li r4,epcr - mtdcr ebccfga,r4 + li r4,EBC0_CFG + mtdcr EBC0_CFGADDR,r4 lis r4,0xB84E ori r4,r4,0xF000 - mtdcr ebccfgd,r4 + mtdcr EBC0_CFGDATA,r4 /* * drive POST code */ diff --git a/board/sc3/sc3.c b/board/sc3/sc3.c index 6c82fe7e9..5ae7b1244 100644 --- a/board/sc3/sc3.c +++ b/board/sc3/sc3.c @@ -199,14 +199,14 @@ int board_start_ide(void) static int sc3_cameron_init (void) { /* Set up the Memory Controller for the CAMERON version */ - mtebc (pb4ap, 0x01805940); - mtebc (pb4cr, 0x7401a000); - mtebc (pb5ap, 0x01805940); - mtebc (pb5cr, 0x7401a000); - mtebc (pb6ap, 0x0); - mtebc (pb6cr, 0x0); - mtebc (pb7ap, 0x0); - mtebc (pb7cr, 0x0); + mtebc (PB4AP, 0x01805940); + mtebc (PB4CR, 0x7401a000); + mtebc (PB5AP, 0x01805940); + mtebc (PB5CR, 0x7401a000); + mtebc (PB6AP, 0x0); + mtebc (PB6CR, 0x0); + mtebc (PB7AP, 0x0); + mtebc (PB7CR, 0x0); return 0; } @@ -312,18 +312,18 @@ int board_early_init_f (void) mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */ /* setup other implementation specific details */ - mtdcr (ecr, 0x60606000); + mtdcr (CPC0_ECR, 0x60606000); - mtdcr (cntrl1, 0x000042C0); + mtdcr (CPC0_CR1, 0x000042C0); if (IS_CAMERON) { - mtdcr (cntrl0, 0x01380000); + mtdcr (CPC0_CR0, 0x01380000); /* Setup the GPIOs */ writel (0x08008000, 0xEF600700); /* Output states */ writel (0x00000000, 0xEF600718); /* Open Drain control */ writel (0x68098000, 0xEF600704); /* Output control */ } else { - mtdcr (cntrl0,0x00080000); + mtdcr (CPC0_CR0,0x00080000); /* Setup the GPIOs */ writel (0x08000000, 0xEF600700); /* Output states */ writel (0x14000000, 0xEF600718); /* Open Drain control */ @@ -331,13 +331,13 @@ int board_early_init_f (void) } /* Code decompression disabled */ - mtdcr (kiar, kconf); - mtdcr (kidr, 0x2B); + mtdcr (KIAR, KCONF); + mtdcr (KIDR, 0x2B); /* CPC0_ER: enable sleep mode of (currently) unused components */ /* CPC0_FR: force unused components into sleep mode */ - mtdcr (cpmer, 0x3F800000); - mtdcr (cpmfr, 0x14000000); + mtdcr (CPMER, 0x3F800000); + mtdcr (CPMFR, 0x14000000); /* set PLB priority */ mtdcr (0x87, 0x08000000); @@ -472,19 +472,19 @@ static void printCSConfig(int reg,unsigned long ap,unsigned long cr) #ifdef SC3_DEBUGOUT -static unsigned int ap[] = {pb0ap, pb1ap, pb2ap, pb3ap, pb4ap, - pb5ap, pb6ap, pb7ap}; -static unsigned int cr[] = {pb0cr, pb1cr, pb2cr, pb3cr, pb4cr, - pb5cr, pb6cr, pb7cr}; +static unsigned int ap[] = {PB0AP, PB1AP, PB2AP, PB3AP, PB4AP, + PB5AP, PB6AP, PB7AP}; +static unsigned int cr[] = {PB0CR, PB1CR, PB2CR, PB3CR, PB4CR, + PB5CR, PB6CR, PB7CR}; static int show_reg (int nr) { unsigned long ul1, ul2; - mtdcr (ebccfga, ap[nr]); - ul1 = mfdcr (ebccfgd); - mtdcr (ebccfga, cr[nr]); - ul2 = mfdcr(ebccfgd); + mtdcr (EBC0_CFGADDR, ap[nr]); + ul1 = mfdcr (EBC0_CFGDATA); + mtdcr (EBC0_CFGADDR, cr[nr]); + ul2 = mfdcr(EBC0_CFGDATA); printCSConfig(nr, ul1, ul2); return 0; } @@ -500,8 +500,8 @@ int checkboard (void) show_reg (i); } - mtdcr (ebccfga, epcr); - ul1 = mfdcr (ebccfgd); + mtdcr (EBC0_CFGADDR, EBC0_CFG); + ul1 = mfdcr (EBC0_CFGDATA); puts ("\nGeneral configuration:\n"); @@ -591,21 +591,21 @@ phys_size_t initdram (int board_type) puts("\nSDRAM configuration:\n"); - mtdcr (memcfga, mem_mcopt1); - ul1 = mfdcr(memcfgd); + mtdcr (SDRAM0_CFGADDR, mem_mcopt1); + ul1 = mfdcr(SDRAM0_CFGDATA); if (!(ul1 & 0x80000000)) { puts(" Controller disabled\n"); return 0; } for (i = 0; i < 4; i++) { - mtdcr (memcfga, mbcf[i]); - ul1 = mfdcr (memcfgd); + mtdcr (SDRAM0_CFGADDR, mbcf[i]); + ul1 = mfdcr (SDRAM0_CFGDATA); mems += printSDRAMConfig (i, ul1); } - mtdcr (memcfga, mem_sdtr1); - ul1 = mfdcr(memcfgd); + mtdcr (SDRAM0_CFGADDR, mem_sdtr1); + ul1 = mfdcr(SDRAM0_CFGDATA); printf ("Timing:\n -CAS latency %lu\n", ((ul1 & 0x1800000) >> 23)+1); printf (" -Precharge %lu (PTA) \n", ((ul1 & 0xC0000) >> 18) + 1); @@ -614,15 +614,15 @@ phys_size_t initdram (int board_type) printf (" -CAS to RAS %lu\n", ((ul1 & 0x1C) >> 2) + 4); printf (" -RAS to CAS %lu\n", ((ul1 & 0x3) + 1)); puts ("Misc:\n"); - mtdcr (memcfga, mem_rtr); - ul1 = mfdcr(memcfgd); + mtdcr (SDRAM0_CFGADDR, mem_rtr); + ul1 = mfdcr(SDRAM0_CFGDATA); printf (" -Refresh rate: %luns\n", (ul1 >> 16) * 7); - mtdcr(memcfga,mem_pmit); - ul2=mfdcr(memcfgd); + mtdcr(SDRAM0_CFGADDR,mem_pmit); + ul2=mfdcr(SDRAM0_CFGDATA); - mtdcr(memcfga,mem_mcopt1); - ul1=mfdcr(memcfgd); + mtdcr(SDRAM0_CFGADDR,mem_mcopt1); + ul1=mfdcr(SDRAM0_CFGDATA); if (ul1 & 0x20000000) printf(" -Power Down after: %luns\n", @@ -658,8 +658,8 @@ phys_size_t initdram (int board_type) else puts(" -Memory lines only at write cycles active outputs\n"); - mtdcr (memcfga, mem_status); - ul1 = mfdcr (memcfgd); + mtdcr (SDRAM0_CFGADDR, mem_status); + ul1 = mfdcr (SDRAM0_CFGDATA); if (ul1 & 0x80000000) puts(" -SDRAM Controller ready\n"); else @@ -670,20 +670,20 @@ phys_size_t initdram (int board_type) return (mems * 1024 * 1024); #else - mtdcr (memcfga, mem_mb0cf); - ul1 = mfdcr (memcfgd); + mtdcr (SDRAM0_CFGADDR, mem_mb0cf); + ul1 = mfdcr (SDRAM0_CFGDATA); mems = printSDRAMConfig (0, ul1); - mtdcr (memcfga, mem_mb1cf); - ul1 = mfdcr (memcfgd); + mtdcr (SDRAM0_CFGADDR, mem_mb1cf); + ul1 = mfdcr (SDRAM0_CFGDATA); mems += printSDRAMConfig (1, ul1); - mtdcr (memcfga, mem_mb2cf); - ul1 = mfdcr(memcfgd); + mtdcr (SDRAM0_CFGADDR, mem_mb2cf); + ul1 = mfdcr(SDRAM0_CFGDATA); mems += printSDRAMConfig (2, ul1); - mtdcr (memcfga, mem_mb3cf); - ul1 = mfdcr(memcfgd); + mtdcr (SDRAM0_CFGADDR, mem_mb3cf); + ul1 = mfdcr(SDRAM0_CFGDATA); mems += printSDRAMConfig (3, ul1); return (mems * 1024 * 1024); diff --git a/board/sheldon/simpc8313/simpc8313.c b/board/sheldon/simpc8313/simpc8313.c index 25e5c2409..1044de2a4 100644 --- a/board/sheldon/simpc8313/simpc8313.c +++ b/board/sheldon/simpc8313/simpc8313.c @@ -112,7 +112,7 @@ void board_init_f(ulong bootflag) puts("NAND boot... "); init_timebase(); initdram(0); - relocate_code(CONFIG_SYS_NAND_U_BOOT_RELOC + 0x10000, (gd_t *)gd, + relocate_code(CONFIG_SYS_NAND_U_BOOT_RELOC_SP, (gd_t *)gd, CONFIG_SYS_NAND_U_BOOT_RELOC); } diff --git a/board/snmc/qs850/flash.c b/board/snmc/qs850/flash.c index 9e276a104..a26a67900 100644 --- a/board/snmc/qs850/flash.c +++ b/board/snmc/qs850/flash.c @@ -104,21 +104,21 @@ unsigned long flash_init (void) /* Re-do sizing to get full correct info */ if (size_b1) { - mtdcr(ebccfga, pb0cr); - pbcr = mfdcr(ebccfgd); - mtdcr(ebccfga, pb0cr); + mtdcr(EBC0_CFGADDR, PB0CR); + pbcr = mfdcr(EBC0_CFGDATA); + mtdcr(EBC0_CFGADDR, PB0CR); base_b1 = -size_b1; pbcr = (pbcr & 0x0001ffff) | base_b1 | (((size_b1/1024/1024)-1)<<17); - mtdcr(ebccfgd, pbcr); + mtdcr(EBC0_CFGDATA, pbcr); } if (size_b0) { - mtdcr(ebccfga, pb1cr); - pbcr = mfdcr(ebccfgd); - mtdcr(ebccfga, pb1cr); + mtdcr(EBC0_CFGADDR, PB1CR); + pbcr = mfdcr(EBC0_CFGDATA); + mtdcr(EBC0_CFGADDR, PB1CR); base_b0 = base_b1 - size_b0; pbcr = (pbcr & 0x0001ffff) | base_b0 | (((size_b0/1024/1024)-1)<<17); - mtdcr(ebccfgd, pbcr); + mtdcr(EBC0_CFGDATA, pbcr); } size_b0 = flash_get_size((volatile FLASH_WORD_SIZE *)base_b0, &flash_info[0]); diff --git a/board/snmc/qs860t/flash.c b/board/snmc/qs860t/flash.c index 2cb8dcb9d..48c2258b3 100644 --- a/board/snmc/qs860t/flash.c +++ b/board/snmc/qs860t/flash.c @@ -102,21 +102,21 @@ unsigned long flash_init (void) /* Re-do sizing to get full correct info */ if (size_b1) { - mtdcr(ebccfga, pb0cr); - pbcr = mfdcr(ebccfgd); - mtdcr(ebccfga, pb0cr); + mtdcr(EBC0_CFGADDR, PB0CR); + pbcr = mfdcr(EBC0_CFGDATA); + mtdcr(EBC0_CFGADDR, PB0CR); base_b1 = -size_b1; pbcr = (pbcr & 0x0001ffff) | base_b1 | (((size_b1/1024/1024)-1)<<17); - mtdcr(ebccfgd, pbcr); + mtdcr(EBC0_CFGDATA, pbcr); } if (size_b0) { - mtdcr(ebccfga, pb1cr); - pbcr = mfdcr(ebccfgd); - mtdcr(ebccfga, pb1cr); + mtdcr(EBC0_CFGADDR, PB1CR); + pbcr = mfdcr(EBC0_CFGDATA); + mtdcr(EBC0_CFGADDR, PB1CR); base_b0 = base_b1 - size_b0; pbcr = (pbcr & 0x0001ffff) | base_b0 | (((size_b0/1024/1024)-1)<<17); - mtdcr(ebccfgd, pbcr); + mtdcr(EBC0_CFGDATA, pbcr); } size_b0 = flash_get_size((volatile FLASH_WORD_SIZE *)base_b0, &flash_info[0]); diff --git a/board/tb0229/flash.c b/board/tb0229/flash.c index 933d5ecc8..15546421a 100644 --- a/board/tb0229/flash.c +++ b/board/tb0229/flash.c @@ -108,25 +108,25 @@ unsigned long flash_init (void) /* Re-do sizing to get full correct info */ if (size_b1) { - mtdcr (ebccfga, pb0cr); - pbcr = mfdcr (ebccfgd); - mtdcr (ebccfga, pb0cr); + mtdcr (EBC0_CFGADDR, PB0CR); + pbcr = mfdcr (EBC0_CFGDATA); + mtdcr (EBC0_CFGADDR, PB0CR); base_b1 = -size_b1; pbcr = (pbcr & 0x0001ffff) | base_b1 | (((size_b1 / 1024 / 1024) - 1) << 17); - mtdcr (ebccfgd, pbcr); - /* printf("pb1cr = %x\n", pbcr); */ + mtdcr (EBC0_CFGDATA, pbcr); + /* printf("PB1CR = %x\n", pbcr); */ } if (size_b0) { - mtdcr (ebccfga, pb1cr); - pbcr = mfdcr (ebccfgd); - mtdcr (ebccfga, pb1cr); + mtdcr (EBC0_CFGADDR, PB1CR); + pbcr = mfdcr (EBC0_CFGDATA); + mtdcr (EBC0_CFGADDR, PB1CR); base_b0 = base_b1 - size_b0; pbcr = (pbcr & 0x0001ffff) | base_b0 | (((size_b0 / 1024 / 1024) - 1) << 17); - mtdcr (ebccfgd, pbcr); - /* printf("pb0cr = %x\n", pbcr); */ + mtdcr (EBC0_CFGDATA, pbcr); + /* printf("PB0CR = %x\n", pbcr); */ } size_b0 = diff --git a/board/w7o/init.S b/board/w7o/init.S index 902c63113..090b07a1e 100644 --- a/board/w7o/init.S +++ b/board/w7o/init.S @@ -87,48 +87,48 @@ ext_bus_cntlr_init: /******************************************************************** * Setup External Bus Controller (EBC). *******************************************************************/ - addi r3, 0, epcr - mtdcr ebccfga, r3 + addi r3, 0, EBC0_CFG + mtdcr EBC0_CFGADDR, r3 addis r4, 0, 0xb040 /* Device base timeout = 1024 cycles */ ori r4, r4, 0x0 /* Drive CS with external master */ - mtdcr ebccfgd, r4 + mtdcr EBC0_CFGDATA, r4 /******************************************************************** * Change PCIINT signal to PerWE *******************************************************************/ - mfdcr r4, cntrl1 + mfdcr r4, CPC0_CR1 ori r4, r4, 0x4000 - mtdcr cntrl1, r4 + mtdcr CPC0_CR1, r4 /******************************************************************** * Memory Bank 0 (Flash Bank 0) initialization *******************************************************************/ - addi r3, 0, pb0ap - mtdcr ebccfga, r3 + addi r3, 0, PB1AP + mtdcr EBC0_CFGADDR, r3 addis r4, 0, CONFIG_SYS_W7O_EBC_PB0AP@h ori r4, r4, CONFIG_SYS_W7O_EBC_PB0AP@l - mtdcr ebccfgd, r4 + mtdcr EBC0_CFGDATA, r4 - addi r3, 0, pb0cr - mtdcr ebccfga, r3 + addi r3, 0, PB0CR + mtdcr EBC0_CFGADDR, r3 addis r4, 0, CONFIG_SYS_W7O_EBC_PB0CR@h ori r4, r4, CONFIG_SYS_W7O_EBC_PB0CR@l - mtdcr ebccfgd, r4 + mtdcr EBC0_CFGDATA, r4 /******************************************************************** * Memory Bank 7 LEDs - NEEDED BECAUSE OF HW WATCHDOG AND LEDs. *******************************************************************/ - addi r3, 0, pb7ap - mtdcr ebccfga, r3 + addi r3, 0, PB7AP + mtdcr EBC0_CFGADDR, r3 addis r4, 0, CONFIG_SYS_W7O_EBC_PB7AP@h ori r4, r4, CONFIG_SYS_W7O_EBC_PB7AP@l - mtdcr ebccfgd, r4 + mtdcr EBC0_CFGDATA, r4 - addi r3, 0, pb7cr - mtdcr ebccfga, r3 + addi r3, 0, PB7CR + mtdcr EBC0_CFGADDR, r3 addis r4, 0, CONFIG_SYS_W7O_EBC_PB7CR@h ori r4, r4, CONFIG_SYS_W7O_EBC_PB7CR@l - mtdcr ebccfgd, r4 + mtdcr EBC0_CFGDATA, r4 /* We are all done */ mtlr r0 /* Restore link register */ @@ -183,35 +183,35 @@ sdram_init: * values to be changed. */ addi r3, 0, mem_mcopt1 - mtdcr memcfga, r3 + mtdcr SDRAM0_CFGADDR, r3 addis r4, 0, 0x0 ori r4, r4, 0x0 - mtdcr memcfgd, r4 + mtdcr SDRAM0_CFGDATA, r4 /* * Set MB0CF for ext bank 0. (0-4MB) Address Mode 5 since 11x8x2 * All other banks are disabled. */ addi r3, 0, mem_mb0cf - mtdcr memcfga, r3 + mtdcr SDRAM0_CFGADDR, r3 addis r4, 0, 0x0000 /* BA=0x0, SZ=4MB */ ori r4, r4, 0x8001 /* Mode is 5, 11x8x2or4, BE=Enabled */ - mtdcr memcfgd, r4 + mtdcr SDRAM0_CFGDATA, r4 /* Clear MB1CR,MB2CR,MB3CR to turn other banks off */ addi r4, 0, 0 /* Zero the data reg */ addi r3, r3, 4 /* Point to MB1CF reg */ - mtdcr memcfga, r3 /* Set the address */ - mtdcr memcfgd, r4 /* Zero the reg */ + mtdcr SDRAM0_CFGADDR, r3 /* Set the address */ + mtdcr SDRAM0_CFGDATA, r4 /* Zero the reg */ addi r3, r3, 4 /* Point to MB2CF reg */ - mtdcr memcfga, r3 /* Set the address */ - mtdcr memcfgd, r4 /* Zero the reg */ + mtdcr SDRAM0_CFGADDR, r3 /* Set the address */ + mtdcr SDRAM0_CFGDATA, r4 /* Zero the reg */ addi r3, r3, 4 /* Point to MB3CF reg */ - mtdcr memcfga, r3 /* Set the address */ - mtdcr memcfgd, r4 /* Zero the reg */ + mtdcr SDRAM0_CFGADDR, r3 /* Set the address */ + mtdcr SDRAM0_CFGDATA, r4 /* Zero the reg */ /******************************************************************** * Set the SDRAM Timing reg, SDTR1 and the refresh timer reg, RTR. @@ -223,18 +223,18 @@ sdram_init: * Set up SDTR1 */ addi r3, 0, mem_sdtr1 - mtdcr memcfga, r3 + mtdcr SDRAM0_CFGADDR, r3 addis r4, 0, 0x0086 /* SDTR1 value for 100Mhz */ ori r4, r4, 0x400D - mtdcr memcfgd, r4 + mtdcr SDRAM0_CFGDATA, r4 /* * Set RTR */ addi r3, 0, mem_rtr - mtdcr memcfga, r3 + mtdcr SDRAM0_CFGADDR, r3 addis r4, 0, 0x05F0 /* RTR refresh val = 15.625ms@100Mhz */ - mtdcr memcfgd, r4 + mtdcr SDRAM0_CFGDATA, r4 /******************************************************************** * Delay to ensure 200usec have elapsed since reset. Assume worst @@ -251,10 +251,10 @@ sdram_init: * Set memory controller options reg, MCOPT1. *******************************************************************/ addi r3, 0, mem_mcopt1 - mtdcr memcfga, r3 + mtdcr SDRAM0_CFGADDR, r3 addis r4, 0, 0x80E0 /* DC_EN=1,SRE=0,PME=0,MEMCHK=0 */ ori r4, r4, 0x0000 /* REGEN=0,DRW=00,BRPF=01,ECCDD=1 */ - mtdcr memcfgd, r4 /* EMDULR=1 */ + mtdcr SDRAM0_CFGDATA, r4 /* EMDULR=1 */ ..sdri_done: /* restore and return */ diff --git a/board/w7o/w7o.c b/board/w7o/w7o.c index 22cdfcd7d..6479beeb1 100644 --- a/board/w7o/w7o.c +++ b/board/w7o/w7o.c @@ -170,17 +170,17 @@ unsigned long get_dram_size (void) int size = 0; /* Get bank Size registers */ - mtdcr (memcfga, mem_mb0cf); /* get bank 0 config reg */ - regs[0] = mfdcr (memcfgd); + mtdcr (SDRAM0_CFGADDR, mem_mb0cf); /* get bank 0 config reg */ + regs[0] = mfdcr (SDRAM0_CFGDATA); - mtdcr (memcfga, mem_mb1cf); /* get bank 1 config reg */ - regs[1] = mfdcr (memcfgd); + mtdcr (SDRAM0_CFGADDR, mem_mb1cf); /* get bank 1 config reg */ + regs[1] = mfdcr (SDRAM0_CFGDATA); - mtdcr (memcfga, mem_mb2cf); /* get bank 2 config reg */ - regs[2] = mfdcr (memcfgd); + mtdcr (SDRAM0_CFGADDR, mem_mb2cf); /* get bank 2 config reg */ + regs[2] = mfdcr (SDRAM0_CFGDATA); - mtdcr (memcfga, mem_mb3cf); /* get bank 3 config reg */ - regs[3] = mfdcr (memcfgd); + mtdcr (SDRAM0_CFGADDR, mem_mb3cf); /* get bank 3 config reg */ + regs[3] = mfdcr (SDRAM0_CFGDATA); /* compute the size, add each bank if enabled */ for (i = 0; i < 4; i++) { diff --git a/board/xes/xpedite1000/xpedite1000.c b/board/xes/xpedite1000/xpedite1000.c index 4529b7ede..58041fcd3 100644 --- a/board/xes/xpedite1000/xpedite1000.c +++ b/board/xes/xpedite1000/xpedite1000.c @@ -42,8 +42,8 @@ int board_early_init_f(void) * 23 = #LED_STATUS1 * 24 = #LED_STATUS2 */ - mfsdr(sdr_pfc0, sdrreg); - mtsdr(sdr_pfc0, (sdrreg & ~SDR0_PFC0_TRE_ENABLE) | 0x00003e00); + mfsdr(SDR0_PFC0, sdrreg); + mtsdr(SDR0_PFC0, (sdrreg & ~SDR0_PFC0_TRE_ENABLE) | 0x00003e00); out32(CONFIG_SYS_GPIO_BASE + 0x018, (USR_LED0 | USR_LED1 | USR_LED2 | USR_LED3)); LED0_OFF(); LED1_OFF(); @@ -51,14 +51,14 @@ int board_early_init_f(void) LED3_OFF(); /* Setup the external bus controller/chip selects */ - mtebc(pb0ap, 0x04055200); /* 16MB Strata FLASH */ - mtebc(pb0cr, 0xff098000); /* BAS=0xff0 16MB R/W 8-bit */ - mtebc(pb1ap, 0x04055200); /* 512KB Socketed AMD FLASH */ - mtebc(pb1cr, 0xfe018000); /* BAS=0xfe0 1MB R/W 8-bit */ - mtebc(pb6ap, 0x05006400); /* 32-64MB AMD MirrorBit FLASH */ - mtebc(pb6cr, 0xf00da000); /* BAS=0xf00 64MB R/W i6-bit */ - mtebc(pb7ap, 0x05006400); /* 32-64MB AMD MirrorBit FLASH */ - mtebc(pb7cr, 0xf40da000); /* BAS=0xf40 64MB R/W 16-bit */ + mtebc(PB0AP, 0x04055200); /* 16MB Strata FLASH */ + mtebc(PB0CR, 0xff098000); /* BAS=0xff0 16MB R/W 8-bit */ + mtebc(PB1AP, 0x04055200); /* 512KB Socketed AMD FLASH */ + mtebc(PB1CR, 0xfe018000); /* BAS=0xfe0 1MB R/W 8-bit */ + mtebc(PB6AP, 0x05006400); /* 32-64MB AMD MirrorBit FLASH */ + mtebc(PB6CR, 0xf00da000); /* BAS=0xf00 64MB R/W i6-bit */ + mtebc(PB7AP, 0x05006400); /* 32-64MB AMD MirrorBit FLASH */ + mtebc(PB7CR, 0xf40da000); /* BAS=0xf40 64MB R/W 16-bit */ /* * Setup the interrupt controller polarities, triggers, etc. @@ -151,15 +151,15 @@ int pci_pre_init(struct pci_controller * hose) unsigned long strap; /* See if we're supposed to setup the pci */ - mfsdr(sdr_sdstp1, strap); + mfsdr(SDR0_SDSTP1, strap); if ((strap & 0x00010000) == 0) return 0; #if defined(CONFIG_SYS_PCI_FORCE_PCI_CONV) /* Setup System Device Register PCIX0_XCR */ - mfsdr(sdr_xcr, strap); + mfsdr(SDR0_XCR, strap); strap &= 0x0f000000; - mtsdr(sdr_xcr, strap); + mtsdr(SDR0_XCR, strap); #endif return 1; diff --git a/board/xilinx/microblaze-generic/u-boot.lds b/board/xilinx/microblaze-generic/u-boot.lds index 5a0868015..c20c6dd1d 100644 --- a/board/xilinx/microblaze-generic/u-boot.lds +++ b/board/xilinx/microblaze-generic/u-boot.lds @@ -60,7 +60,10 @@ SECTIONS .bss ALIGN(0x4): { __bss_start = .; + *(.sbss) + *(.scommon) *(.bss) + *(COMMON) . = ALIGN(4); __bss_end = .; } diff --git a/board/zeus/zeus.c b/board/zeus/zeus.c index 9bc390f83..fc9dfa02c 100644 --- a/board/zeus/zeus.c +++ b/board/zeus/zeus.c @@ -61,7 +61,7 @@ int board_early_init_f(void) /* * Configure CPC0_PCI to enable PerWE as output */ - mtdcr(cpc0_pci, CPC0_PCI_SPE); + mtdcr(CPC0_PCI, CPC0_PCI_SPE); return 0; } @@ -107,7 +107,7 @@ int misc_init_r(void) /* Re-do sizing to get full correct info */ /* adjust flash start and offset */ - mfebc(pb0cr, pbcr); + mfebc(PB0CR, pbcr); switch (gd->bd->bi_flashsize) { case 1 << 20: size_val = 0; @@ -135,7 +135,7 @@ int misc_init_r(void) break; } pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17); - mtebc(pb0cr, pbcr); + mtebc(PB0CR, pbcr); /* * Re-check to get correct base address diff --git a/common/cmd_reginfo.c b/common/cmd_reginfo.c index abb9941af..3ed15092a 100644 --- a/common/cmd_reginfo.c +++ b/common/cmd_reginfo.c @@ -108,72 +108,72 @@ int do_reginfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) puts ("\nMemory (SDRAM) Configuration\n" "besra besrsa besrb besrsb bear mcopt1 rtr pmit\n"); - mtdcr(memcfga,mem_besra); printf ("%08x ", mfdcr(memcfgd)); - mtdcr(memcfga,mem_besrsa); printf ("%08x ", mfdcr(memcfgd)); - mtdcr(memcfga,mem_besrb); printf ("%08x ", mfdcr(memcfgd)); - mtdcr(memcfga,mem_besrsb); printf ("%08x ", mfdcr(memcfgd)); - mtdcr(memcfga,mem_bear); printf ("%08x ", mfdcr(memcfgd)); - mtdcr(memcfga,mem_mcopt1); printf ("%08x ", mfdcr(memcfgd)); - mtdcr(memcfga,mem_rtr); printf ("%08x ", mfdcr(memcfgd)); - mtdcr(memcfga,mem_pmit); printf ("%08x ", mfdcr(memcfgd)); + mtdcr(SDRAM0_CFGADDR,mem_besra); printf ("%08x ", mfdcr(SDRAM0_CFGDATA)); + mtdcr(SDRAM0_CFGADDR,mem_besrsa); printf ("%08x ", mfdcr(SDRAM0_CFGDATA)); + mtdcr(SDRAM0_CFGADDR,mem_besrb); printf ("%08x ", mfdcr(SDRAM0_CFGDATA)); + mtdcr(SDRAM0_CFGADDR,mem_besrsb); printf ("%08x ", mfdcr(SDRAM0_CFGDATA)); + mtdcr(SDRAM0_CFGADDR,mem_bear); printf ("%08x ", mfdcr(SDRAM0_CFGDATA)); + mtdcr(SDRAM0_CFGADDR,mem_mcopt1); printf ("%08x ", mfdcr(SDRAM0_CFGDATA)); + mtdcr(SDRAM0_CFGADDR,mem_rtr); printf ("%08x ", mfdcr(SDRAM0_CFGDATA)); + mtdcr(SDRAM0_CFGADDR,mem_pmit); printf ("%08x ", mfdcr(SDRAM0_CFGDATA)); puts ("\n" "mb0cf mb1cf mb2cf mb3cf sdtr1 ecccf eccerr\n"); - mtdcr(memcfga,mem_mb0cf); printf ("%08x ", mfdcr(memcfgd)); - mtdcr(memcfga,mem_mb1cf); printf ("%08x ", mfdcr(memcfgd)); - mtdcr(memcfga,mem_mb2cf); printf ("%08x ", mfdcr(memcfgd)); - mtdcr(memcfga,mem_mb3cf); printf ("%08x ", mfdcr(memcfgd)); - mtdcr(memcfga,mem_sdtr1); printf ("%08x ", mfdcr(memcfgd)); - mtdcr(memcfga,mem_ecccf); printf ("%08x ", mfdcr(memcfgd)); - mtdcr(memcfga,mem_eccerr); printf ("%08x ", mfdcr(memcfgd)); + mtdcr(SDRAM0_CFGADDR,mem_mb0cf); printf ("%08x ", mfdcr(SDRAM0_CFGDATA)); + mtdcr(SDRAM0_CFGADDR,mem_mb1cf); printf ("%08x ", mfdcr(SDRAM0_CFGDATA)); + mtdcr(SDRAM0_CFGADDR,mem_mb2cf); printf ("%08x ", mfdcr(SDRAM0_CFGDATA)); + mtdcr(SDRAM0_CFGADDR,mem_mb3cf); printf ("%08x ", mfdcr(SDRAM0_CFGDATA)); + mtdcr(SDRAM0_CFGADDR,mem_sdtr1); printf ("%08x ", mfdcr(SDRAM0_CFGDATA)); + mtdcr(SDRAM0_CFGADDR,mem_ecccf); printf ("%08x ", mfdcr(SDRAM0_CFGDATA)); + mtdcr(SDRAM0_CFGADDR,mem_eccerr); printf ("%08x ", mfdcr(SDRAM0_CFGDATA)); printf ("\n\n" "DMA Channels\n" - "dmasr dmasgc dmaadr\n" + "DMASR DMASGC DMAADR\n" "%08x %08x %08x\n" "dmacr_0 dmact_0 dmada_0 dmasa_0 dmasb_0\n" "%08x %08x %08x %08x %08x\n" "dmacr_1 dmact_1 dmada_1 dmasa_1 dmasb_1\n" "%08x %08x %08x %08x %08x\n", - mfdcr(dmasr), mfdcr(dmasgc),mfdcr(dmaadr), - mfdcr(dmacr0), mfdcr(dmact0),mfdcr(dmada0), mfdcr(dmasa0), mfdcr(dmasb0), - mfdcr(dmacr1), mfdcr(dmact1),mfdcr(dmada1), mfdcr(dmasa1), mfdcr(dmasb1)); + mfdcr(DMASR), mfdcr(DMASGC),mfdcr(DMAADR), + mfdcr(DMACR0), mfdcr(DMACT0),mfdcr(DMADA0), mfdcr(DMASA0), mfdcr(DMASB0), + mfdcr(DMACR1), mfdcr(DMACT1),mfdcr(DMADA1), mfdcr(DMASA1), mfdcr(DMASB1)); printf ( "dmacr_2 dmact_2 dmada_2 dmasa_2 dmasb_2\n" "%08x %08x %08x %08x %08x\n" "dmacr_3 dmact_3 dmada_3 dmasa_3 dmasb_3\n" "%08x %08x %08x %08x %08x\n", - mfdcr(dmacr2), mfdcr(dmact2),mfdcr(dmada2), mfdcr(dmasa2), mfdcr(dmasb2), - mfdcr(dmacr3), mfdcr(dmact3),mfdcr(dmada3), mfdcr(dmasa3), mfdcr(dmasb3) ); + mfdcr(DMACR2), mfdcr(DMACT2),mfdcr(DMADA2), mfdcr(DMASA2), mfdcr(DMASB2), + mfdcr(DMACR3), mfdcr(DMACT3),mfdcr(DMADA3), mfdcr(DMASA3), mfdcr(DMASB3) ); puts ("\n" "External Bus\n" - "pbear pbesr0 pbesr1 epcr\n"); - mtdcr(ebccfga,pbear); printf ("%08x ", mfdcr(ebccfgd)); - mtdcr(ebccfga,pbesr0); printf ("%08x ", mfdcr(ebccfgd)); - mtdcr(ebccfga,pbesr1); printf ("%08x ", mfdcr(ebccfgd)); - mtdcr(ebccfga,epcr); printf ("%08x ", mfdcr(ebccfgd)); + "PBEAR PBESR0 PBESR1 EBC0_CFG\n"); + mtdcr(EBC0_CFGADDR,PBEAR); printf ("%08x ", mfdcr(EBC0_CFGDATA)); + mtdcr(EBC0_CFGADDR,PBESR0); printf ("%08x ", mfdcr(EBC0_CFGDATA)); + mtdcr(EBC0_CFGADDR,PBESR1); printf ("%08x ", mfdcr(EBC0_CFGDATA)); + mtdcr(EBC0_CFGADDR,EBC0_CFG); printf ("%08x ", mfdcr(EBC0_CFGDATA)); puts ("\n" - "pb0cr pb0ap pb1cr pb1ap pb2cr pb2ap pb3cr pb3ap\n"); - mtdcr(ebccfga,pb0cr); printf ("%08x ", mfdcr(ebccfgd)); - mtdcr(ebccfga,pb0ap); printf ("%08x ", mfdcr(ebccfgd)); - mtdcr(ebccfga,pb1cr); printf ("%08x ", mfdcr(ebccfgd)); - mtdcr(ebccfga,pb1ap); printf ("%08x ", mfdcr(ebccfgd)); - mtdcr(ebccfga,pb2cr); printf ("%08x ", mfdcr(ebccfgd)); - mtdcr(ebccfga,pb2ap); printf ("%08x ", mfdcr(ebccfgd)); - mtdcr(ebccfga,pb3cr); printf ("%08x ", mfdcr(ebccfgd)); - mtdcr(ebccfga,pb3ap); printf ("%08x ", mfdcr(ebccfgd)); + "PB0CR PB0AP PB1CR PB1AP PB2CR PB2AP PB3CR PB3AP\n"); + mtdcr(EBC0_CFGADDR,PB0CR); printf ("%08x ", mfdcr(EBC0_CFGDATA)); + mtdcr(EBC0_CFGADDR,PB0AP); printf ("%08x ", mfdcr(EBC0_CFGDATA)); + mtdcr(EBC0_CFGADDR,PB1CR); printf ("%08x ", mfdcr(EBC0_CFGDATA)); + mtdcr(EBC0_CFGADDR,PB1AP); printf ("%08x ", mfdcr(EBC0_CFGDATA)); + mtdcr(EBC0_CFGADDR,PB2CR); printf ("%08x ", mfdcr(EBC0_CFGDATA)); + mtdcr(EBC0_CFGADDR,PB2AP); printf ("%08x ", mfdcr(EBC0_CFGDATA)); + mtdcr(EBC0_CFGADDR,PB3CR); printf ("%08x ", mfdcr(EBC0_CFGDATA)); + mtdcr(EBC0_CFGADDR,PB3AP); printf ("%08x ", mfdcr(EBC0_CFGDATA)); puts ("\n" - "pb4cr pb4ap pb5cr bp5ap pb6cr pb6ap pb7cr pb7ap\n"); - mtdcr(ebccfga,pb4cr); printf ("%08x ", mfdcr(ebccfgd)); - mtdcr(ebccfga,pb4ap); printf ("%08x ", mfdcr(ebccfgd)); - mtdcr(ebccfga,pb5cr); printf ("%08x ", mfdcr(ebccfgd)); - mtdcr(ebccfga,pb5ap); printf ("%08x ", mfdcr(ebccfgd)); - mtdcr(ebccfga,pb6cr); printf ("%08x ", mfdcr(ebccfgd)); - mtdcr(ebccfga,pb6ap); printf ("%08x ", mfdcr(ebccfgd)); - mtdcr(ebccfga,pb7cr); printf ("%08x ", mfdcr(ebccfgd)); - mtdcr(ebccfga,pb7ap); printf ("%08x ", mfdcr(ebccfgd)); + "PB4CR PB4AP PB5CR bp5ap PB6CR PB6AP PB7CR PB7AP\n"); + mtdcr(EBC0_CFGADDR,PB4CR); printf ("%08x ", mfdcr(EBC0_CFGDATA)); + mtdcr(EBC0_CFGADDR,PB4AP); printf ("%08x ", mfdcr(EBC0_CFGDATA)); + mtdcr(EBC0_CFGADDR,PB5CR); printf ("%08x ", mfdcr(EBC0_CFGDATA)); + mtdcr(EBC0_CFGADDR,PB5AP); printf ("%08x ", mfdcr(EBC0_CFGDATA)); + mtdcr(EBC0_CFGADDR,PB6CR); printf ("%08x ", mfdcr(EBC0_CFGDATA)); + mtdcr(EBC0_CFGADDR,PB6AP); printf ("%08x ", mfdcr(EBC0_CFGDATA)); + mtdcr(EBC0_CFGADDR,PB7CR); printf ("%08x ", mfdcr(EBC0_CFGDATA)); + mtdcr(EBC0_CFGADDR,PB7AP); printf ("%08x ", mfdcr(EBC0_CFGDATA)); puts ("\n\n"); @@ -195,51 +195,51 @@ int do_reginfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) puts ("\nMemory (SDRAM) Configuration\n" "mcopt1 rtr pmit mb0cf mb1cf sdtr1\n"); - mtdcr(memcfga,mem_mcopt1); printf ("%08x ", mfdcr(memcfgd)); - mtdcr(memcfga,mem_rtr); printf ("%08x ", mfdcr(memcfgd)); - mtdcr(memcfga,mem_pmit); printf ("%08x ", mfdcr(memcfgd)); - mtdcr(memcfga,mem_mb0cf); printf ("%08x ", mfdcr(memcfgd)); - mtdcr(memcfga,mem_mb1cf); printf ("%08x ", mfdcr(memcfgd)); - mtdcr(memcfga,mem_sdtr1); printf ("%08x ", mfdcr(memcfgd)); + mtdcr(SDRAM0_CFGADDR,mem_mcopt1); printf ("%08x ", mfdcr(SDRAM0_CFGDATA)); + mtdcr(SDRAM0_CFGADDR,mem_rtr); printf ("%08x ", mfdcr(SDRAM0_CFGDATA)); + mtdcr(SDRAM0_CFGADDR,mem_pmit); printf ("%08x ", mfdcr(SDRAM0_CFGDATA)); + mtdcr(SDRAM0_CFGADDR,mem_mb0cf); printf ("%08x ", mfdcr(SDRAM0_CFGDATA)); + mtdcr(SDRAM0_CFGADDR,mem_mb1cf); printf ("%08x ", mfdcr(SDRAM0_CFGDATA)); + mtdcr(SDRAM0_CFGADDR,mem_sdtr1); printf ("%08x ", mfdcr(SDRAM0_CFGDATA)); printf ("\n\n" "DMA Channels\n" - "dmasr dmasgc dmaadr\n" "%08x %08x %08x\n" + "DMASR DMASGC DMAADR\n" "%08x %08x %08x\n" "dmacr_0 dmact_0 dmada_0 dmasa_0 dmasb_0\n" "%08x %08x %08x %08x %08x\n" "dmacr_1 dmact_1 dmada_1 dmasa_1 dmasb_1\n" "%08x %08x %08x %08x %08x\n", - mfdcr(dmasr), mfdcr(dmasgc),mfdcr(dmaadr), - mfdcr(dmacr0), mfdcr(dmact0),mfdcr(dmada0), mfdcr(dmasa0), mfdcr(dmasb0), - mfdcr(dmacr1), mfdcr(dmact1),mfdcr(dmada1), mfdcr(dmasa1), mfdcr(dmasb1)); + mfdcr(DMASR), mfdcr(DMASGC),mfdcr(DMAADR), + mfdcr(DMACR0), mfdcr(DMACT0),mfdcr(DMADA0), mfdcr(DMASA0), mfdcr(DMASB0), + mfdcr(DMACR1), mfdcr(DMACT1),mfdcr(DMADA1), mfdcr(DMASA1), mfdcr(DMASB1)); printf ( "dmacr_2 dmact_2 dmada_2 dmasa_2 dmasb_2\n" "%08x %08x %08x %08x %08x\n" "dmacr_3 dmact_3 dmada_3 dmasa_3 dmasb_3\n" "%08x %08x %08x %08x %08x\n", - mfdcr(dmacr2), mfdcr(dmact2),mfdcr(dmada2), mfdcr(dmasa2), mfdcr(dmasb2), - mfdcr(dmacr3), mfdcr(dmact3),mfdcr(dmada3), mfdcr(dmasa3), mfdcr(dmasb3) ); + mfdcr(DMACR2), mfdcr(DMACT2),mfdcr(DMADA2), mfdcr(DMASA2), mfdcr(DMASB2), + mfdcr(DMACR3), mfdcr(DMACT3),mfdcr(DMADA3), mfdcr(DMASA3), mfdcr(DMASB3) ); puts ("\n" "External Bus\n" - "pbear pbesr0 pbesr1 epcr\n"); - mtdcr(ebccfga,pbear); printf ("%08x ", mfdcr(ebccfgd)); - mtdcr(ebccfga,pbesr0); printf ("%08x ", mfdcr(ebccfgd)); - mtdcr(ebccfga,pbesr1); printf ("%08x ", mfdcr(ebccfgd)); - mtdcr(ebccfga,epcr); printf ("%08x ", mfdcr(ebccfgd)); + "PBEAR PBESR0 PBESR1 EBC0_CFG\n"); + mtdcr(EBC0_CFGADDR,PBEAR); printf ("%08x ", mfdcr(EBC0_CFGDATA)); + mtdcr(EBC0_CFGADDR,PBESR0); printf ("%08x ", mfdcr(EBC0_CFGDATA)); + mtdcr(EBC0_CFGADDR,PBESR1); printf ("%08x ", mfdcr(EBC0_CFGDATA)); + mtdcr(EBC0_CFGADDR,EBC0_CFG); printf ("%08x ", mfdcr(EBC0_CFGDATA)); puts ("\n" - "pb0cr pb0ap pb1cr pb1ap pb2cr pb2ap pb3cr pb3ap\n"); - mtdcr(ebccfga,pb0cr); printf ("%08x ", mfdcr(ebccfgd)); - mtdcr(ebccfga,pb0ap); printf ("%08x ", mfdcr(ebccfgd)); - mtdcr(ebccfga,pb1cr); printf ("%08x ", mfdcr(ebccfgd)); - mtdcr(ebccfga,pb1ap); printf ("%08x ", mfdcr(ebccfgd)); - mtdcr(ebccfga,pb2cr); printf ("%08x ", mfdcr(ebccfgd)); - mtdcr(ebccfga,pb2ap); printf ("%08x ", mfdcr(ebccfgd)); - mtdcr(ebccfga,pb3cr); printf ("%08x ", mfdcr(ebccfgd)); - mtdcr(ebccfga,pb3ap); printf ("%08x ", mfdcr(ebccfgd)); + "PB0CR PB0AP PB1CR PB1AP PB2CR PB2AP PB3CR PB3AP\n"); + mtdcr(EBC0_CFGADDR,PB0CR); printf ("%08x ", mfdcr(EBC0_CFGDATA)); + mtdcr(EBC0_CFGADDR,PB0AP); printf ("%08x ", mfdcr(EBC0_CFGDATA)); + mtdcr(EBC0_CFGADDR,PB1CR); printf ("%08x ", mfdcr(EBC0_CFGDATA)); + mtdcr(EBC0_CFGADDR,PB1AP); printf ("%08x ", mfdcr(EBC0_CFGDATA)); + mtdcr(EBC0_CFGADDR,PB2CR); printf ("%08x ", mfdcr(EBC0_CFGDATA)); + mtdcr(EBC0_CFGADDR,PB2AP); printf ("%08x ", mfdcr(EBC0_CFGDATA)); + mtdcr(EBC0_CFGADDR,PB3CR); printf ("%08x ", mfdcr(EBC0_CFGDATA)); + mtdcr(EBC0_CFGADDR,PB3AP); printf ("%08x ", mfdcr(EBC0_CFGDATA)); puts ("\n" - "pb4cr pb4ap\n"); - mtdcr(ebccfga,pb4cr); printf ("%08x ", mfdcr(ebccfgd)); - mtdcr(ebccfga,pb4ap); printf ("%08x ", mfdcr(ebccfgd)); + "PB4CR PB4AP\n"); + mtdcr(EBC0_CFGADDR,PB4CR); printf ("%08x ", mfdcr(EBC0_CFGDATA)); + mtdcr(EBC0_CFGADDR,PB4AP); printf ("%08x ", mfdcr(EBC0_CFGDATA)); puts ("\n\n"); #elif defined(CONFIG_5xx) diff --git a/cpu/mpc85xx/Makefile b/cpu/mpc85xx/Makefile index a177f427e..3ef00e850 100644 --- a/cpu/mpc85xx/Makefile +++ b/cpu/mpc85xx/Makefile @@ -65,6 +65,7 @@ COBJS-$(CONFIG_CPM2) += serial_scc.o COBJS = $(COBJS-y) COBJS += cpu.o COBJS += cpu_init.o +COBJS += cpu_init_early.o COBJS += interrupts.o COBJS += speed.o COBJS += tlb.o diff --git a/cpu/mpc85xx/cpu_init.c b/cpu/mpc85xx/cpu_init.c index a54cf5d15..a6d1e999b 100644 --- a/cpu/mpc85xx/cpu_init.c +++ b/cpu/mpc85xx/cpu_init.c @@ -1,5 +1,5 @@ /* - * Copyright 2007 Freescale Semiconductor. + * Copyright 2007-2009 Freescale Semiconductor, Inc. * * (C) Copyright 2003 Motorola Inc. * Modified by Xianghua Xiao, X.Xiao@motorola.com @@ -129,41 +129,6 @@ void config_8560_ioports (volatile ccsr_cpm_t * cpm) } #endif -/* We run cpu_init_early_f in AS = 1 */ -void cpu_init_early_f(void) -{ - /* Pointer is writable since we allocated a register for it */ - gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET); - - /* Clear initial global data */ - memset ((void *) gd, 0, sizeof (gd_t)); - - set_tlb(0, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 1, 0, BOOKE_PAGESZ_4K, 0); - - /* set up CCSR if we want it moved */ -#if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR_PHYS) - { - u32 temp; - volatile u32 *ccsr_virt = - (volatile u32 *)(CONFIG_SYS_CCSRBAR + 0x1000); - - set_tlb(0, (u32)ccsr_virt, CONFIG_SYS_CCSRBAR_DEFAULT, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 1, 1, BOOKE_PAGESZ_4K, 0); - - temp = in_be32(ccsr_virt); - out_be32(ccsr_virt, CONFIG_SYS_CCSRBAR_PHYS >> 12); - temp = in_be32((volatile u32 *)CONFIG_SYS_CCSRBAR); - } -#endif - - init_laws(); - invalidate_tlb(0); - init_tlbs(); -} - /* * Breathe some life into the CPU... * @@ -291,6 +256,25 @@ int cpu_init_r(void) asm("msync;isync"); cache_ctl = l2cache->l2ctl; + +#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L2_ADDR) + if (cache_ctl & MPC85xx_L2CTL_L2E) { + /* Clear L2 SRAM memory-mapped base address */ + out_be32(&l2cache->l2srbar0, 0x0); + out_be32(&l2cache->l2srbar1, 0x0); + + /* set MBECCDIS=0, SBECCDIS=0 */ + clrbits_be32(&l2cache->l2errdis, + (MPC85xx_L2ERRDIS_MBECC | + MPC85xx_L2ERRDIS_SBECC)); + + /* set L2E=0, L2SRAM=0 */ + clrbits_be32(&l2cache->l2ctl, + (MPC85xx_L2CTL_L2E | + MPC85xx_L2CTL_L2SRAM_ENTIRE)); + } +#endif + l2siz_field = (cache_ctl >> 28) & 0x3; switch (l2siz_field) { @@ -380,5 +364,16 @@ extern void setup_ivors(void); void arch_preboot_os(void) { + u32 msr; + + /* + * We are changing interrupt offsets and are about to boot the OS so + * we need to make sure we disable all async interrupts. EE is already + * disabled by the time we get called. + */ + msr = mfmsr(); + msr &= ~(MSR_ME|MSR_CE|MSR_DE); + mtmsr(msr); + setup_ivors(); } diff --git a/cpu/mpc85xx/cpu_init_early.c b/cpu/mpc85xx/cpu_init_early.c new file mode 100644 index 000000000..7886f868f --- /dev/null +++ b/cpu/mpc85xx/cpu_init_early.c @@ -0,0 +1,76 @@ +/* + * Copyright 2009 Freescale Semiconductor, Inc + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/processor.h> +#include <asm/mmu.h> +#include <asm/fsl_law.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* We run cpu_init_early_f in AS = 1 */ +void cpu_init_early_f(void) +{ + u32 mas0, mas1, mas2, mas3, mas7; + int i; + + /* Pointer is writable since we allocated a register for it */ + gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET); + + /* + * Clear initial global data + * we don't use memset so we can share this code with NAND_SPL + */ + for (i = 0; i < sizeof(gd_t); i++) + ((char *)gd)[i] = 0; + + mas0 = MAS0_TLBSEL(0) | MAS0_ESEL(0); + mas1 = MAS1_VALID | MAS1_TID(0) | MAS1_TS | MAS1_TSIZE(BOOKE_PAGESZ_4K); + mas2 = FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR, MAS2_I|MAS2_G); + mas3 = FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_PHYS, 0, MAS3_SW|MAS3_SR); + mas7 = FSL_BOOKE_MAS7(CONFIG_SYS_CCSRBAR_PHYS); + + write_tlb(mas0, mas1, mas2, mas3, mas7); + + /* set up CCSR if we want it moved */ +#if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR_PHYS) + { + u32 temp; + volatile u32 *ccsr_virt = + (volatile u32 *)(CONFIG_SYS_CCSRBAR + 0x1000); + + mas0 = MAS0_TLBSEL(0) | MAS0_ESEL(1); + /* mas1 is the same as above */ + mas2 = FSL_BOOKE_MAS2((u32)ccsr_virt, MAS2_I|MAS2_G); + mas3 = FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_DEFAULT, 0, + MAS3_SW|MAS3_SR); + mas7 = FSL_BOOKE_MAS7(CONFIG_SYS_CCSRBAR_DEFAULT); + + write_tlb(mas0, mas1, mas2, mas3, mas7); + + temp = in_be32(ccsr_virt); + out_be32(ccsr_virt, CONFIG_SYS_CCSRBAR_PHYS >> 12); + temp = in_be32((volatile u32 *)CONFIG_SYS_CCSRBAR); + } +#endif + + init_laws(); + invalidate_tlb(0); + init_tlbs(); +} diff --git a/cpu/mpc85xx/start.S b/cpu/mpc85xx/start.S index e21a4eb87..c9e91a90d 100644 --- a/cpu/mpc85xx/start.S +++ b/cpu/mpc85xx/start.S @@ -1,5 +1,5 @@ /* - * Copyright 2004, 2007 Freescale Semiconductor. + * Copyright 2004, 2007-2009 Freescale Semiconductor. * Copyright (C) 2003 Motorola,Inc. * * See file CREDITS for list of people who contributed to this @@ -57,10 +57,12 @@ GOT_ENTRY(_GOT2_TABLE_) GOT_ENTRY(_FIXUP_TABLE_) +#ifndef CONFIG_NAND_SPL GOT_ENTRY(_start) GOT_ENTRY(_start_of_vectors) GOT_ENTRY(_end_of_vectors) GOT_ENTRY(transfer_to_handler) +#endif GOT_ENTRY(__init_end) GOT_ENTRY(_end) @@ -156,6 +158,10 @@ _start_e500: mtspr MCSR,r0 /* machine check syndrome register */ mtxer r0 /* clear integer exception register */ +#ifdef CONFIG_SYS_BOOK3E_HV + mtspr MAS8,r0 /* make sure MAS8 is clear */ +#endif + /* Enable Time Base and Select Time Base Clock */ lis r0,HID0_EMCP@h /* Enable machine check */ #if defined(CONFIG_ENABLE_36BIT_PHYS) @@ -235,10 +241,11 @@ _start_e500: #endif /* CONFIG_MPC8569 */ - /* create a temp mapping in AS=1 to the 4M boot window */ lis r6,FSL_BOOKE_MAS0(1, 15, 0)@h ori r6,r6,FSL_BOOKE_MAS0(1, 15, 0)@l +#ifndef CONFIG_SYS_RAMBOOT + /* create a temp mapping in AS=1 to the 4M boot window */ lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_4M)@h ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_4M)@l @@ -248,6 +255,20 @@ _start_e500: /* The 85xx has the default boot window 0xff800000 - 0xffffffff */ lis r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h ori r9,r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l +#else + /* + * create a temp mapping in AS=1 to the 1M TEXT_BASE space, the main + * image has been relocated to TEXT_BASE on the second stage. + */ + lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_1M)@h + ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_1M)@l + + lis r8,FSL_BOOKE_MAS2(TEXT_BASE, (MAS2_I|MAS2_G))@h + ori r8,r8,FSL_BOOKE_MAS2(TEXT_BASE, (MAS2_I|MAS2_G))@l + + lis r9,FSL_BOOKE_MAS3(TEXT_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h + ori r9,r9,FSL_BOOKE_MAS3(TEXT_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l +#endif mtspr MAS0,r6 mtspr MAS1,r7 @@ -278,8 +299,8 @@ _start_e500: msync tlbwe - lis r6,MSR_CE|MSR_ME|MSR_DE|MSR_IS|MSR_DS@h - ori r6,r6,MSR_CE|MSR_ME|MSR_DE|MSR_IS|MSR_DS@l + lis r6,MSR_IS|MSR_DS@h + ori r6,r6,MSR_IS|MSR_DS@l lis r7,switch_as@h ori r7,r7,switch_as@l @@ -359,6 +380,7 @@ _start_cont: bl board_init_f isync +#ifndef CONFIG_NAND_SPL . = EXC_OFF_SYS_RESET .globl _start_of_vectors _start_of_vectors: @@ -813,10 +835,33 @@ in32: in32r: lwbrx r3,r0,r3 blr +#endif /* !CONFIG_NAND_SPL */ /*------------------------------------------------------------------------------*/ /* + * void write_tlb(mas0, mas1, mas2, mas3, mas7) + */ + .globl write_tlb +write_tlb: + mtspr MAS0,r3 + mtspr MAS1,r4 + mtspr MAS2,r5 + mtspr MAS3,r6 +#ifdef CONFIG_ENABLE_36BIT_PHYS + mtspr MAS7,r7 +#endif + li r3,0 +#ifdef CONFIG_SYS_BOOK3E_HV + mtspr MAS8,r3 +#endif + isync + tlbwe + msync + isync + blr + +/* * void relocate_code (addr_sp, gd, addr_moni) * * This "function" does not return, instead it continues in RAM @@ -975,6 +1020,7 @@ clear_bss: mr r4,r10 /* Destination Address */ bl board_init_r +#ifndef CONFIG_NAND_SPL /* * Copy exception vector code to low memory * @@ -1128,3 +1174,4 @@ setup_ivors: #include "fixed_ivor.S" blr +#endif /* !CONFIG_NAND_SPL */ diff --git a/cpu/mpc85xx/tlb.c b/cpu/mpc85xx/tlb.c index 0497a29ba..6e94c237a 100644 --- a/cpu/mpc85xx/tlb.c +++ b/cpu/mpc85xx/tlb.c @@ -1,5 +1,5 @@ /* - * Copyright 2008 Freescale Semiconductor, Inc. + * Copyright 2008-2009 Freescale Semiconductor, Inc. * * (C) Copyright 2000 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -32,6 +32,30 @@ DECLARE_GLOBAL_DATA_PTR; +void invalidate_tlb(u8 tlb) +{ + if (tlb == 0) + mtspr(MMUCSR0, 0x4); + if (tlb == 1) + mtspr(MMUCSR0, 0x2); +} + +void init_tlbs(void) +{ + int i; + + for (i = 0; i < num_tlb_entries; i++) { + write_tlb(tlb_table[i].mas0, + tlb_table[i].mas1, + tlb_table[i].mas2, + tlb_table[i].mas3, + tlb_table[i].mas7); + } + + return ; +} + +#ifndef CONFIG_NAND_SPL void set_tlb(u8 tlb, u32 epn, u64 rpn, u8 perms, u8 wimge, u8 ts, u8 esel, u8 tsize, u8 iprot) @@ -42,16 +66,9 @@ void set_tlb(u8 tlb, u32 epn, u64 rpn, _mas1 = FSL_BOOKE_MAS1(1, iprot, 0, ts, tsize); _mas2 = FSL_BOOKE_MAS2(epn, wimge); _mas3 = FSL_BOOKE_MAS3(rpn, 0, perms); - _mas7 = rpn >> 32; + _mas7 = FSL_BOOKE_MAS7(rpn); - mtspr(MAS0, _mas0); - mtspr(MAS1, _mas1); - mtspr(MAS2, _mas2); - mtspr(MAS3, _mas3); -#ifdef CONFIG_ENABLE_36BIT_PHYS - mtspr(MAS7, _mas7); -#endif - asm volatile("isync;msync;tlbwe;isync"); + write_tlb(_mas0, _mas1, _mas2, _mas3, _mas7); #ifdef CONFIG_ADDR_MAP if ((tlb == 1) && (gd->flags & GD_FLG_RELOC)) @@ -84,28 +101,6 @@ void disable_tlb(u8 esel) #endif } -void invalidate_tlb(u8 tlb) -{ - if (tlb == 0) - mtspr(MMUCSR0, 0x4); - if (tlb == 1) - mtspr(MMUCSR0, 0x2); -} - -void init_tlbs(void) -{ - int i; - - for (i = 0; i < num_tlb_entries; i++) { - set_tlb(tlb_table[i].tlb, tlb_table[i].epn, tlb_table[i].rpn, - tlb_table[i].perms, tlb_table[i].wimge, - tlb_table[i].ts, tlb_table[i].esel, tlb_table[i].tsize, - tlb_table[i].iprot); - } - - return ; -} - static void tlbsx (const volatile unsigned *addr) { __asm__ __volatile__ ("tlbsx 0,%0" : : "r" (addr), "m" (*addr)); @@ -215,3 +210,4 @@ unsigned int setup_ddr_tlbs(unsigned int memsize_in_meg) */ return memsize_in_meg; } +#endif /* !CONFIG_NAND_SPL */ diff --git a/cpu/mpc85xx/traps.c b/cpu/mpc85xx/traps.c index 1045cc1e7..9d16b9b55 100644 --- a/cpu/mpc85xx/traps.c +++ b/cpu/mpc85xx/traps.c @@ -287,6 +287,7 @@ UnknownException(struct pt_regs *regs) regs->nip, regs->msr, regs->trap); _exception(0, regs); } + void ExtIntException(struct pt_regs *regs) { @@ -305,14 +306,6 @@ ExtIntException(struct pt_regs *regs) printf(" irq IACK0@%05x=%d\n",(int)&pic->iack0,vect); show_regs(regs); print_backtrace((unsigned long *)regs->gpr[1]); - machinecheck_count++; -#ifdef EXTINT_NOSKIP - printf("Returning back to 0x%08x\n",regs->nip); -#else - regs->nip += 4; /* skip offending instruction */ - printf("Skipping current instr, Returning to 0x%08lx\n",regs->nip); -#endif - } void diff --git a/cpu/mpc85xx/u-boot-nand.lds b/cpu/mpc85xx/u-boot-nand.lds new file mode 100644 index 000000000..a0fc8f138 --- /dev/null +++ b/cpu/mpc85xx/u-boot-nand.lds @@ -0,0 +1,138 @@ +/* + * Copyright 2009 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +PHDRS +{ + text PT_LOAD; + bss PT_LOAD; +} + +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + *(.text) + *(.fixup) + *(.got1) + } :text + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.eh_frame) + *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) + } :text + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2; + __fixup_entries = (. - _FIXUP_TABLE_) >> 2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + .bootpg ADDR(.text) - 0x1000 : + { + cpu/mpc85xx/start.o (.bootpg) + } :text = 0xffff + + . = ADDR(.text) + 0x80000; + + __bss_start = .; + .bss (NOLOAD) : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } :bss + + . = ALIGN(4); + _end = . ; + PROVIDE (end = .); +} diff --git a/cpu/mpc8xxx/ddr/ctrl_regs.c b/cpu/mpc8xxx/ddr/ctrl_regs.c index 5e63c5df3..250504145 100644 --- a/cpu/mpc8xxx/ddr/ctrl_regs.c +++ b/cpu/mpc8xxx/ddr/ctrl_regs.c @@ -1,5 +1,5 @@ /* - * Copyright 2008 Freescale Semiconductor, Inc. + * Copyright 2008-2009 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -675,12 +675,12 @@ static void set_ddr_sdram_mode(fsl_ddr_cfg_regs_t *ddr, esdmode = (0 | ((qoff & 0x1) << 12) | ((tdqs_en & 0x1) << 11) - | ((rtt & 0x4) << 9) /* rtt field is split */ + | ((rtt & 0x4) << 7) /* rtt field is split */ | ((wrlvl_en & 0x1) << 7) - | ((rtt & 0x2) << 6) /* rtt field is split */ - | ((dic & 0x2) << 5) /* DIC field is split */ + | ((rtt & 0x2) << 5) /* rtt field is split */ + | ((dic & 0x2) << 4) /* DIC field is split */ | ((al & 0x3) << 3) - | ((rtt & 0x1) << 2) /* rtt field is split */ + | ((rtt & 0x1) << 2) /* rtt field is split */ | ((dic & 0x1) << 1) /* DIC field is split */ | ((dll_en & 0x1) << 0) ); diff --git a/cpu/mpc8xxx/ddr/ddr3_dimm_params.c b/cpu/mpc8xxx/ddr/ddr3_dimm_params.c index 13d234e93..d4199baa8 100644 --- a/cpu/mpc8xxx/ddr/ddr3_dimm_params.c +++ b/cpu/mpc8xxx/ddr/ddr3_dimm_params.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2008 Freescale Semiconductor, Inc. + * Copyright 2008-2009 Freescale Semiconductor, Inc. * Dave Liu <daveliu@freescale.com> * * calculate the organization and timing parameter @@ -71,7 +71,7 @@ compute_ranksize(const ddr3_spd_eeprom_t *spd) bsize = 1ULL << (nbit_sdram_cap_bsize - 3 + nbit_primary_bus_width - nbit_sdram_width); - debug("DDR: DDR III rank density = 0x%08x\n", bsize); + debug("DDR: DDR III rank density = 0x%16lx\n", bsize); return bsize; } diff --git a/cpu/ppc4xx/40x_spd_sdram.c b/cpu/ppc4xx/40x_spd_sdram.c index 75bd70dc6..83fa709da 100644 --- a/cpu/ppc4xx/40x_spd_sdram.c +++ b/cpu/ppc4xx/40x_spd_sdram.c @@ -422,7 +422,7 @@ long int spd_sdram(int(read_spd)(uint addr)) * program all the registers. * -------------------------------------------------------------------*/ -#define mtsdram0(reg, data) mtdcr(memcfga,reg);mtdcr(memcfgd,data) +#define mtsdram0(reg, data) mtdcr(SDRAM0_CFGADDR,reg);mtdcr(SDRAM0_CFGDATA,data) /* disable memcontroller so updates work */ mtsdram0( mem_mcopt1, 0 ); diff --git a/cpu/ppc4xx/44x_spd_ddr.c b/cpu/ppc4xx/44x_spd_ddr.c index f26fcdaa1..c93f23a67 100644 --- a/cpu/ppc4xx/44x_spd_ddr.c +++ b/cpu/ppc4xx/44x_spd_ddr.c @@ -192,8 +192,8 @@ long int spd_sdram(void) { /* * Soft-reset SDRAM controller. */ - mtsdr(sdr_srst, SDR0_SRST_DMC); - mtsdr(sdr_srst, 0x00000000); + mtsdr(SDR0_SRST, SDR0_SRST_DMC); + mtsdr(SDR0_SRST, 0x00000000); #endif /* @@ -848,11 +848,11 @@ static int short_mem_test(void) 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55}}; for (bxcr_num = 0; bxcr_num < MAXBXCR; bxcr_num++) { - mtdcr(memcfga, mem_b0cr + (bxcr_num << 2)); - if ((mfdcr(memcfgd) & SDRAM_BXCR_SDBE) == SDRAM_BXCR_SDBE) { + mtdcr(SDRAM0_CFGADDR, mem_b0cr + (bxcr_num << 2)); + if ((mfdcr(SDRAM0_CFGDATA) & SDRAM_BXCR_SDBE) == SDRAM_BXCR_SDBE) { /* Bank is enabled */ membase = (unsigned long*) - (mfdcr(memcfgd) & SDRAM_BXCR_SDBA_MASK); + (mfdcr(SDRAM0_CFGDATA) & SDRAM_BXCR_SDBA_MASK); /* * Run the short memory test @@ -1086,8 +1086,8 @@ static unsigned long program_bxcr(unsigned long *dimm_populated, * Set the BxCR regs. First, wipe out the bank config registers. */ for (bx_cr_num = 0; bx_cr_num < MAXBXCR; bx_cr_num++) { - mtdcr(memcfga, mem_b0cr + (bx_cr_num << 2)); - mtdcr(memcfgd, 0x00000000); + mtdcr(SDRAM0_CFGADDR, mem_b0cr + (bx_cr_num << 2)); + mtdcr(SDRAM0_CFGDATA, 0x00000000); bank_parms[bx_cr_num].bank_size_bytes = 0; } @@ -1232,12 +1232,12 @@ static unsigned long program_bxcr(unsigned long *dimm_populated, /* Set the SDRAM0_BxCR regs thanks to sort tables */ for (bx_cr_num = 0, bank_base_addr = 0; bx_cr_num < MAXBXCR; bx_cr_num++) { if (bank_parms[sorted_bank_num[bx_cr_num]].bank_size_bytes) { - mtdcr(memcfga, mem_b0cr + (sorted_bank_num[bx_cr_num] << 2)); - temp = mfdcr(memcfgd) & ~(SDRAM_BXCR_SDBA_MASK | SDRAM_BXCR_SDSZ_MASK | + mtdcr(SDRAM0_CFGADDR, mem_b0cr + (sorted_bank_num[bx_cr_num] << 2)); + temp = mfdcr(SDRAM0_CFGDATA) & ~(SDRAM_BXCR_SDBA_MASK | SDRAM_BXCR_SDSZ_MASK | SDRAM_BXCR_SDAM_MASK | SDRAM_BXCR_SDBE); temp = temp | (bank_base_addr & SDRAM_BXCR_SDBA_MASK) | bank_parms[sorted_bank_num[bx_cr_num]].cr; - mtdcr(memcfgd, temp); + mtdcr(SDRAM0_CFGDATA, temp); bank_base_addr += bank_parms[sorted_bank_num[bx_cr_num]].bank_size_bytes; debug("SDRAM0_B%dCR=0x%08lx\n", sorted_bank_num[bx_cr_num], temp); } diff --git a/cpu/ppc4xx/4xx_pci.c b/cpu/ppc4xx/4xx_pci.c index 184cef5d1..e97f32c7b 100644 --- a/cpu/ppc4xx/4xx_pci.c +++ b/cpu/ppc4xx/4xx_pci.c @@ -100,7 +100,7 @@ int __pci_pre_init(struct pci_controller *hose) * The arbiter is enabled in this place because of * compatibility reasons. */ - mtdcr(cpc0_pci, mfdcr(cpc0_pci) | CPC0_PCI_ARBIT_EN); + mtdcr(CPC0_PCI, mfdcr(CPC0_PCI) | CPC0_PCI_ARBIT_EN); #endif /* CONFIG_405EP */ return 1; @@ -118,10 +118,10 @@ ushort pmc405_pci_subsys_deviceid(void); int __is_pci_host(struct pci_controller *hose) { #if defined(CONFIG_405GP) - if (mfdcr(strap) & PSR_PCI_ARBIT_EN) + if (mfdcr(CPC0_PSR) & PSR_PCI_ARBIT_EN) return 1; #elif defined (CONFIG_405EP) - if (mfdcr(cpc0_pci) & CPC0_PCI_ARBIT_EN) + if (mfdcr(CPC0_PCI) & CPC0_PCI_ARBIT_EN) return 1; #endif return 0; @@ -491,7 +491,7 @@ int pci_440_init (struct pci_controller *hose) #if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE) unsigned long strap; - mfsdr(sdr_sdstp1,strap); + mfsdr(SDR0_SDSTP1,strap); if ((strap & SDR0_SDSTP1_PISE_MASK) == 0) { printf("PCI: SDR0_STRP1[PISE] not set.\n"); printf("PCI: Configuration aborted.\n"); @@ -500,7 +500,7 @@ int pci_440_init (struct pci_controller *hose) #elif defined(CONFIG_440GP) unsigned long strap; - strap = mfdcr(cpc0_strp1); + strap = mfdcr(CPC0_STRP1); if ((strap & CPC0_STRP1_PISE_MASK) == 0) { printf("PCI: CPC0_STRP1[PISE] not set.\n"); printf("PCI: Configuration aborted.\n"); diff --git a/cpu/ppc4xx/4xx_uart.c b/cpu/ppc4xx/4xx_uart.c index 0780624e4..8de65425c 100644 --- a/cpu/ppc4xx/4xx_uart.c +++ b/cpu/ppc4xx/4xx_uart.c @@ -90,7 +90,7 @@ DECLARE_GLOBAL_DATA_PTR; #define CR0_EXTCLK_ENA 0x00600000 #define CR0_UDIV_POS 16 #define UDIV_SUBTRACT 1 -#define UART0_SDR cntrl0 +#define UART0_SDR CPC0_CR0 #define MFREG(a, d) d = mfdcr(a) #define MTREG(a, d) mtdcr(a, d) #else /* #if defined(CONFIG_440GP) */ @@ -99,18 +99,18 @@ DECLARE_GLOBAL_DATA_PTR; #define CR0_EXTCLK_ENA 0x00800000 #define CR0_UDIV_POS 0 #define UDIV_SUBTRACT 0 -#define UART0_SDR sdr_uart0 -#define UART1_SDR sdr_uart1 +#define UART0_SDR SDR0_UART0 +#define UART1_SDR SDR0_UART1 #if defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \ defined(CONFIG_440GR) || defined(CONFIG_440GRX) || \ defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \ defined(CONFIG_460EX) || defined(CONFIG_460GT) -#define UART2_SDR sdr_uart2 +#define UART2_SDR SDR0_UART2 #endif #if defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \ defined(CONFIG_440GR) || defined(CONFIG_440GRX) || \ defined(CONFIG_460EX) || defined(CONFIG_460GT) -#define UART3_SDR sdr_uart3 +#define UART3_SDR SDR0_UART3 #endif #define MFREG(a, d) mfsdr(a, d) #define MTREG(a, d) mtsdr(a, d) @@ -130,8 +130,8 @@ DECLARE_GLOBAL_DATA_PTR; #define CR0_EXTCLK_ENA 0x00800000 #define CR0_UDIV_POS 0 #define UDIV_SUBTRACT 0 -#define UART0_SDR sdr_uart0 -#define UART1_SDR sdr_uart1 +#define UART0_SDR SDR0_UART0 +#define UART1_SDR SDR0_UART1 #else /* CONFIG_405GP || CONFIG_405CR */ #define UART0_BASE 0xef600300 #define UART1_BASE 0xef600400 @@ -282,7 +282,7 @@ static void serial_divs (int baudrate, unsigned long *pudiv, u32 reg; /* check the pll feedback source */ - mfcpr(cprpllc, cpr_pllc); + mfcpr(CPR0_PLLC, cpr_pllc); get_sys_info(&sysinfo); @@ -312,10 +312,10 @@ static void serial_divs (int baudrate, unsigned long *pudiv, } *pudiv = udiv; - mfcpr(cprperd0, reg); + mfcpr(CPC0_PERD0, reg); reg &= ~0x0000ffff; reg |= ((udiv - 0) << 8) | (udiv - 0); - mtcpr(cprperd0, reg); + mtcpr(CPC0_PERD0, reg); *pbdiv = div / udiv; } #endif /* defined(CONFIG_440) && !defined(CONFIG_SYS_EXT_SERIAL_CLK) */ @@ -412,7 +412,7 @@ int serial_init_dev (unsigned long base) clk = tmp = reg = 0; #else #ifdef CONFIG_405EP - reg = mfdcr(cpc0_ucr) & ~(UCR0_MASK | UCR1_MASK); + reg = mfdcr(CPC0_UCR) & ~(UCR0_MASK | UCR1_MASK); clk = gd->cpu_clk; tmp = CONFIG_SYS_BASE_BAUD * 16; udiv = (clk + tmp / 2) / tmp; @@ -420,9 +420,9 @@ int serial_init_dev (unsigned long base) udiv = UDIV_MAX; reg |= (udiv) << UCR0_UDIV_POS; /* set the UART divisor */ reg |= (udiv) << UCR1_UDIV_POS; /* set the UART divisor */ - mtdcr (cpc0_ucr, reg); + mtdcr (CPC0_UCR, reg); #else /* CONFIG_405EP */ - reg = mfdcr(cntrl0) & ~CR0_MASK; + reg = mfdcr(CPC0_CR0) & ~CR0_MASK; #ifdef CONFIG_SYS_EXT_SERIAL_CLOCK clk = CONFIG_SYS_EXT_SERIAL_CLOCK; udiv = 1; @@ -439,7 +439,7 @@ int serial_init_dev (unsigned long base) #endif #endif reg |= (udiv - 1) << CR0_UDIV_POS; /* set the UART divisor */ - mtdcr (cntrl0, reg); + mtdcr (CPC0_CR0, reg); #endif /* CONFIG_405EP */ tmp = gd->baudrate * udiv * 16; bdiv = (clk + tmp / 2) / tmp; diff --git a/cpu/ppc4xx/cpu.c b/cpu/ppc4xx/cpu.c index e9861abe7..228790466 100644 --- a/cpu/ppc4xx/cpu.c +++ b/cpu/ppc4xx/cpu.c @@ -64,7 +64,7 @@ int get_cpu_num(void) __attribute__((weak, alias("__get_cpu_num"))); static int pci_async_enabled(void) { #if defined(CONFIG_405GP) - return (mfdcr(strap) & PSR_PCI_ASYNC_EN); + return (mfdcr(CPC0_PSR) & PSR_PCI_ASYNC_EN); #endif #if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ @@ -72,7 +72,7 @@ static int pci_async_enabled(void) defined(CONFIG_460EX) || defined(CONFIG_460GT) unsigned long val; - mfsdr(sdr_sdstp1, val); + mfsdr(SDR0_SDSTP1, val); return (val & SDR0_SDSTP1_PAME_MASK); #endif } @@ -84,21 +84,21 @@ static int pci_async_enabled(void) static int pci_arbiter_enabled(void) { #if defined(CONFIG_405GP) - return (mfdcr(strap) & PSR_PCI_ARBIT_EN); + return (mfdcr(CPC0_PSR) & PSR_PCI_ARBIT_EN); #endif #if defined(CONFIG_405EP) - return (mfdcr(cpc0_pci) & CPC0_PCI_ARBIT_EN); + return (mfdcr(CPC0_PCI) & CPC0_PCI_ARBIT_EN); #endif #if defined(CONFIG_440GP) - return (mfdcr(cpc0_strp1) & CPC0_STRP1_PAE_MASK); + return (mfdcr(CPC0_STRP1) & CPC0_STRP1_PAE_MASK); #endif #if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE) unsigned long val; - mfsdr(sdr_xcr, val); + mfsdr(SDR0_XCR, val); return (val & 0x80000000); #endif #if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ @@ -106,7 +106,7 @@ static int pci_arbiter_enabled(void) defined(CONFIG_460EX) || defined(CONFIG_460GT) unsigned long val; - mfsdr(sdr_pci0, val); + mfsdr(SDR0_PCI0, val); return (val & 0x80000000); #endif } @@ -118,11 +118,11 @@ static int pci_arbiter_enabled(void) static int i2c_bootrom_enabled(void) { #if defined(CONFIG_405EP) - return (mfdcr(cpc0_boot) & CPC0_BOOT_SEP); + return (mfdcr(CPC0_BOOT) & CPC0_BOOT_SEP); #else unsigned long val; - mfsdr(sdr_sdcs, val); + mfsdr(SDR0_SDCS0, val); return (val & SDR0_SDCS_SDD); #endif } @@ -256,7 +256,7 @@ static int bootstrap_option(void) { unsigned long val; - mfsdr(SDR_PINSTP, val); + mfsdr(SDR0_PINSTP, val); return ((val & 0xf0000000) >> SDR0_PINSTP_SHIFT); } #endif /* SDR0_PINSTP_SHIFT */ @@ -265,13 +265,13 @@ static int bootstrap_option(void) #if defined(CONFIG_440) static int do_chip_reset (unsigned long sys0, unsigned long sys1) { - /* Changes to cpc0_sys0 and cpc0_sys1 require chip + /* Changes to CPC0_SYS0 and CPC0_SYS1 require chip * reset. */ - mtdcr (cntrl0, mfdcr (cntrl0) | 0x80000000); /* Set SWE */ - mtdcr (cpc0_sys0, sys0); - mtdcr (cpc0_sys1, sys1); - mtdcr (cntrl0, mfdcr (cntrl0) & ~0x80000000); /* Clr SWE */ + mtdcr (CPC0_CR0, mfdcr (CPC0_CR0) | 0x80000000); /* Set SWE */ + mtdcr (CPC0_SYS0, sys0); + mtdcr (CPC0_SYS1, sys1); + mtdcr (CPC0_CR0, mfdcr (CPC0_CR0) & ~0x80000000); /* Clr SWE */ mtspr (SPRN_DBCR0, 0x20000000); /* Reset the chip */ return 1; @@ -410,13 +410,13 @@ int checkcpu (void) case PVR_440GP_RB: puts("GP Rev. B"); /* See errata 1.12: CHIP_4 */ - if ((mfdcr(cpc0_sys0) != mfdcr(cpc0_strp0)) || - (mfdcr(cpc0_sys1) != mfdcr(cpc0_strp1)) ){ + if ((mfdcr(CPC0_SYS0) != mfdcr(CPC0_STRP0)) || + (mfdcr(CPC0_SYS1) != mfdcr(CPC0_STRP1)) ){ puts ( "\n\t CPC0_SYSx DCRs corrupted. " "Resetting chip ...\n"); udelay( 1000 * 1000 ); /* Give time for serial buf to clear */ - do_chip_reset ( mfdcr(cpc0_strp0), - mfdcr(cpc0_strp1) ); + do_chip_reset ( mfdcr(CPC0_STRP0), + mfdcr(CPC0_STRP1) ); } break; diff --git a/cpu/ppc4xx/cpu_init.c b/cpu/ppc4xx/cpu_init.c index 65092fb8e..bd06b9bc2 100644 --- a/cpu/ppc4xx/cpu_init.c +++ b/cpu/ppc4xx/cpu_init.c @@ -58,17 +58,17 @@ void reconfigure_pll(u32 new_cpu_freq) target_perdv0 = 4; target_spcid0 = 4; - mfcpr(clk_primbd, reg); + mfcpr(CPR0_PRIMBD, reg); temp = (reg & PRBDV_MASK) >> 24; prbdv0 = temp ? temp : 8; if (prbdv0 != target_prbdv0) { reg &= ~PRBDV_MASK; reg |= ((target_prbdv0 == 8 ? 0 : target_prbdv0) << 24); - mtcpr(clk_primbd, reg); + mtcpr(CPR0_PRIMBD, reg); reset_needed = 1; } - mfcpr(clk_plld, reg); + mfcpr(CPR0_PLLD, reg); temp = (reg & PLLD_FWDVA_MASK) >> 16; fwdva = temp ? temp : 16; @@ -89,35 +89,35 @@ void reconfigure_pll(u32 new_cpu_freq) ((target_fwdvb == 8 ? 0 : target_fwdvb) << 8) | ((target_fbdv == 32 ? 0 : target_fbdv) << 24) | (target_lfbdv == 64 ? 0 : target_lfbdv); - mtcpr(clk_plld, reg); + mtcpr(CPR0_PLLD, reg); reset_needed = 1; } - mfcpr(clk_perd, reg); + mfcpr(CPR0_PERD, reg); perdv0 = (reg & CPR0_PERD_PERDV0_MASK) >> 24; if (perdv0 != target_perdv0) { reg &= ~CPR0_PERD_PERDV0_MASK; reg |= (target_perdv0 << 24); - mtcpr(clk_perd, reg); + mtcpr(CPR0_PERD, reg); reset_needed = 1; } - mfcpr(clk_spcid, reg); + mfcpr(CPR0_SPCID, reg); temp = (reg & CPR0_SPCID_SPCIDV0_MASK) >> 24; spcid0 = temp ? temp : 4; if (spcid0 != target_spcid0) { reg &= ~CPR0_SPCID_SPCIDV0_MASK; reg |= ((target_spcid0 == 4 ? 0 : target_spcid0) << 24); - mtcpr(clk_spcid, reg); + mtcpr(CPR0_SPCID, reg); reset_needed = 1; } /* Set reload inhibit so configuration will persist across * processor resets */ - mfcpr(clk_icfg, reg); + mfcpr(CPR0_ICFG, reg); reg &= ~CPR0_ICFG_RLI_MASK; reg |= 1 << 31; - mtcpr(clk_icfg, reg); + mtcpr(CPR0_ICFG, reg); } /* Reset processor if configuration changed */ @@ -173,7 +173,7 @@ cpu_init_f (void) /* * Set EMAC noise filter bits */ - mtdcr(cpc0_epctl, CPC0_EPRCSR_E0NFE | CPC0_EPRCSR_E1NFE); + mtdcr(CPC0_EPCTL, CPC0_EPRCSR_E0NFE | CPC0_EPRCSR_E1NFE); #endif /* CONFIG_405EP */ #if defined(CONFIG_SYS_4xx_GPIO_TABLE) @@ -204,43 +204,43 @@ cpu_init_f (void) asm volatile("2: bdnz 2b" ::: "ctr", "cr0"); #endif - mtebc(pb0ap, CONFIG_SYS_EBC_PB0AP); - mtebc(pb0cr, CONFIG_SYS_EBC_PB0CR); + mtebc(PB0AP, CONFIG_SYS_EBC_PB0AP); + mtebc(PB0CR, CONFIG_SYS_EBC_PB0CR); #endif #if (defined(CONFIG_SYS_EBC_PB1AP) && defined(CONFIG_SYS_EBC_PB1CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 1)) - mtebc(pb1ap, CONFIG_SYS_EBC_PB1AP); - mtebc(pb1cr, CONFIG_SYS_EBC_PB1CR); + mtebc(PB1AP, CONFIG_SYS_EBC_PB1AP); + mtebc(PB1CR, CONFIG_SYS_EBC_PB1CR); #endif #if (defined(CONFIG_SYS_EBC_PB2AP) && defined(CONFIG_SYS_EBC_PB2CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 2)) - mtebc(pb2ap, CONFIG_SYS_EBC_PB2AP); - mtebc(pb2cr, CONFIG_SYS_EBC_PB2CR); + mtebc(PB2AP, CONFIG_SYS_EBC_PB2AP); + mtebc(PB2CR, CONFIG_SYS_EBC_PB2CR); #endif #if (defined(CONFIG_SYS_EBC_PB3AP) && defined(CONFIG_SYS_EBC_PB3CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 3)) - mtebc(pb3ap, CONFIG_SYS_EBC_PB3AP); - mtebc(pb3cr, CONFIG_SYS_EBC_PB3CR); + mtebc(PB3AP, CONFIG_SYS_EBC_PB3AP); + mtebc(PB3CR, CONFIG_SYS_EBC_PB3CR); #endif #if (defined(CONFIG_SYS_EBC_PB4AP) && defined(CONFIG_SYS_EBC_PB4CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 4)) - mtebc(pb4ap, CONFIG_SYS_EBC_PB4AP); - mtebc(pb4cr, CONFIG_SYS_EBC_PB4CR); + mtebc(PB4AP, CONFIG_SYS_EBC_PB4AP); + mtebc(PB4CR, CONFIG_SYS_EBC_PB4CR); #endif #if (defined(CONFIG_SYS_EBC_PB5AP) && defined(CONFIG_SYS_EBC_PB5CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 5)) - mtebc(pb5ap, CONFIG_SYS_EBC_PB5AP); - mtebc(pb5cr, CONFIG_SYS_EBC_PB5CR); + mtebc(PB5AP, CONFIG_SYS_EBC_PB5AP); + mtebc(PB5CR, CONFIG_SYS_EBC_PB5CR); #endif #if (defined(CONFIG_SYS_EBC_PB6AP) && defined(CONFIG_SYS_EBC_PB6CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 6)) - mtebc(pb6ap, CONFIG_SYS_EBC_PB6AP); - mtebc(pb6cr, CONFIG_SYS_EBC_PB6CR); + mtebc(PB6AP, CONFIG_SYS_EBC_PB6AP); + mtebc(PB6CR, CONFIG_SYS_EBC_PB6CR); #endif #if (defined(CONFIG_SYS_EBC_PB7AP) && defined(CONFIG_SYS_EBC_PB7CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 7)) - mtebc(pb7ap, CONFIG_SYS_EBC_PB7AP); - mtebc(pb7cr, CONFIG_SYS_EBC_PB7CR); + mtebc(PB7AP, CONFIG_SYS_EBC_PB7AP); + mtebc(PB7CR, CONFIG_SYS_EBC_PB7CR); #endif #if defined (CONFIG_SYS_EBC_CFG) @@ -276,9 +276,9 @@ cpu_init_f (void) * Compatibility mode and Ethernet Clock select are not * correct in the manual */ - mfsdr(sdr_mfr, val); + mfsdr(SDR0_MFR, val); val &= ~0x10000000; - mtsdr(sdr_mfr,val); + mtsdr(SDR0_MFR,val); #endif /* CONFIG_440GX */ #if defined(CONFIG_460EX) @@ -304,10 +304,10 @@ cpu_init_f (void) /* * Set PLB4 arbiter (Segment 0 and 1) to 4 deep pipeline read */ - mtdcr(plb0_acr, (mfdcr(plb0_acr) & ~plb0_acr_rdp_mask) | - plb0_acr_rdp_4deep); - mtdcr(plb1_acr, (mfdcr(plb1_acr) & ~plb1_acr_rdp_mask) | - plb1_acr_rdp_4deep); + mtdcr(PLB0_ACR, (mfdcr(PLB0_ACR) & ~PLB0_ACR_RDP_MASK) | + PLB0_ACR_RDP_4DEEP); + mtdcr(PLB1_ACR, (mfdcr(PLB1_ACR) & ~PLB1_ACR_RDP_MASK) | + PLB1_ACR_RDP_4DEEP); #endif /* CONFIG_440SP/SPE || CONFIG_460EX/GT || CONFIG_405EX */ } @@ -324,7 +324,7 @@ int cpu_init_r (void) * for compatibility to existing PPC405GP designs. */ if ((pvr & 0xfffffff0) == (PVR_405GPR_RB & 0xfffffff0)) { - mtdcr(ecr, 0x60606000); + mtdcr(CPC0_ECR, 0x60606000); } #endif /* defined(CONFIG_405GP) */ diff --git a/cpu/ppc4xx/fdt.c b/cpu/ppc4xx/fdt.c index ba5c120ad..496e0285b 100644 --- a/cpu/ppc4xx/fdt.c +++ b/cpu/ppc4xx/fdt.c @@ -51,8 +51,8 @@ void __ft_board_setup(void *blob, bd_t *bd) * peripheral banks into the OPB/PLB address space */ for (i = 0; i < EBC_NUM_BANKS; i++) { - mtdcr(ebccfga, EBC_BXCR(i)); - bxcr = mfdcr(ebccfgd); + mtdcr(EBC0_CFGADDR, EBC_BXCR(i)); + bxcr = mfdcr(EBC0_CFGDATA); if ((bxcr & EBC_BXCR_BU_MASK) != EBC_BXCR_BU_NONE) { *p++ = i; diff --git a/cpu/ppc4xx/sdram.c b/cpu/ppc4xx/sdram.c index 4365df987..5a3336e3c 100644 --- a/cpu/ppc4xx/sdram.c +++ b/cpu/ppc4xx/sdram.c @@ -375,8 +375,8 @@ phys_size_t initdram(int board_type) /* * Soft-reset SDRAM controller. */ - mtsdr(sdr_srst, SDR0_SRST_DMC); - mtsdr(sdr_srst, 0x00000000); + mtsdr(SDR0_SRST, SDR0_SRST_DMC); + mtsdr(SDR0_SRST, 0x00000000); #endif for (i=0; i<N_MB0CF; i++) { diff --git a/cpu/ppc4xx/speed.c b/cpu/ppc4xx/speed.c index c0a5824a6..988ba9742 100644 --- a/cpu/ppc4xx/speed.c +++ b/cpu/ppc4xx/speed.c @@ -50,12 +50,12 @@ void get_sys_info (PPC4xx_SYS_INFO * sysInfo) /* * Read PLL Mode register */ - pllmr = mfdcr (pllmd); + pllmr = mfdcr (CPC0_PLLMR); /* * Read Pin Strapping register */ - psr = mfdcr (strap); + psr = mfdcr (CPC0_PSR); /* * Determine FWD_DIV. @@ -165,30 +165,13 @@ void get_sys_info (PPC4xx_SYS_INFO * sysInfo) } } + sysInfo->freqOPB = sysInfo->freqPLB / sysInfo->pllOpbDiv; sysInfo->freqEBC = sysInfo->freqPLB / sysInfo->pllExtBusDiv; - sysInfo->freqUART = sysInfo->freqProcessor; } /******************************************** - * get_OPB_freq - * return OPB bus freq in Hz - *********************************************/ -ulong get_OPB_freq (void) -{ - ulong val = 0; - - PPC4xx_SYS_INFO sys_info; - - get_sys_info (&sys_info); - val = sys_info.freqPLB / sys_info.pllOpbDiv; - - return val; -} - - -/******************************************** * get_PCI_freq * return PCI bus freq in Hz *********************************************/ @@ -280,8 +263,8 @@ void get_sys_info (sys_info_t * sysInfo) unsigned long plbedv0; /* Extract configured divisors */ - mfsdr(sdr_sdstp0, strp0); - mfsdr(sdr_sdstp1, strp1); + mfsdr(SDR0_SDSTP0, strp0); + mfsdr(SDR0_SDSTP1, strp1); temp = ((strp0 & PLLSYS0_FWD_DIV_A_MASK) >> 4); sysInfo->pllFwdDivA = get_cpr0_fwdv(temp); @@ -342,7 +325,7 @@ void get_sys_info (sys_info_t *sysInfo) */ /* Decode CPR0_PLLD0 for divisors */ - mfcpr(clk_plld, reg); + mfcpr(CPR0_PLLD, reg); temp = (reg & PLLD_FWDVA_MASK) >> 16; sysInfo->pllFwdDivA = temp ? temp : 16; temp = (reg & PLLD_FWDVB_MASK) >> 8; @@ -351,28 +334,28 @@ void get_sys_info (sys_info_t *sysInfo) sysInfo->pllFbkDiv = temp ? temp : 32; lfdiv = reg & PLLD_LFBDV_MASK; - mfcpr(clk_opbd, reg); + mfcpr(CPR0_OPBD, reg); temp = (reg & OPBDDV_MASK) >> 24; sysInfo->pllOpbDiv = temp ? temp : 4; - mfcpr(clk_perd, reg); + mfcpr(CPR0_PERD, reg); temp = (reg & PERDV_MASK) >> 24; sysInfo->pllExtBusDiv = temp ? temp : 8; - mfcpr(clk_primbd, reg); + mfcpr(CPR0_PRIMBD, reg); temp = (reg & PRBDV_MASK) >> 24; prbdv0 = temp ? temp : 8; - mfcpr(clk_spcid, reg); + mfcpr(CPR0_SPCID, reg); temp = (reg & SPCID_MASK) >> 24; sysInfo->pllPciDiv = temp ? temp : 4; /* Calculate 'M' based on feedback source */ - mfsdr(sdr_sdstp0, reg); + mfsdr(SDR0_SDSTP0, reg); temp = (reg & PLLSYS0_SEL_MASK) >> 27; if (temp == 0) { /* PLL output */ /* Figure which pll to use */ - mfcpr(clk_pllc, reg); + mfcpr(CPR0_PLLC, reg); temp = (reg & PLLC_SRC_MASK) >> 29; if (!temp) /* PLLOUTA */ m = sysInfo->pllFbkDiv * lfdiv * sysInfo->pllFwdDivA; @@ -426,7 +409,7 @@ void get_sys_info (sys_info_t * sysInfo) unsigned long m; /* Extract configured divisors */ - strp0 = mfdcr( cpc0_strp0 ); + strp0 = mfdcr( CPC0_STRP0 ); sysInfo->pllFwdDivA = 8 - ((strp0 & PLLSYS0_FWD_DIV_A_MASK) >> 15); sysInfo->pllFwdDivB = 8 - ((strp0 & PLLSYS0_FWD_DIV_B_MASK) >> 12); temp = (strp0 & PLLSYS0_FB_DIV_MASK) >> 18; @@ -484,8 +467,8 @@ void get_sys_info (sys_info_t * sysInfo) #endif /* Extract configured divisors */ - mfsdr( sdr_sdstp0,strp0 ); - mfsdr( sdr_sdstp1,strp1 ); + mfsdr( SDR0_SDSTP0,strp0 ); + mfsdr( SDR0_SDSTP1,strp1 ); temp = ((strp0 & PLLSYS0_FWD_DIV_A_MASK) >> 8); sysInfo->pllFwdDivA = temp ? temp : 16 ; @@ -531,7 +514,7 @@ void get_sys_info (sys_info_t * sysInfo) /* Determine PCI Clock Period */ pci_clock_per = determine_pci_clock_per(); sysInfo->freqPCI = (ONE_BILLION/pci_clock_per) * 1000; - mfsdr(sdr_ddr0, sdr_ddrpll); + mfsdr(SDR0_DDR0, sdr_ddrpll); sysInfo->freqDDR = ((sysInfo->freqPLB) * SDR0_DDR0_DDRM_DECODE(sdr_ddrpll)); #endif @@ -752,14 +735,6 @@ unsigned long determine_pci_clock_per(void) } #endif -ulong get_OPB_freq (void) -{ - - sys_info_t sys_info; - get_sys_info (&sys_info); - return sys_info.freqOPB; -} - #elif defined(CONFIG_XILINX_405) extern void get_sys_info (sys_info_t * sysInfo); extern ulong get_PCI_freq (void); @@ -794,8 +769,8 @@ void get_sys_info (PPC4xx_SYS_INFO * sysInfo) /* * Read PLL Mode registers */ - pllmr0 = mfdcr (cpc0_pllmr0); - pllmr1 = mfdcr (cpc0_pllmr1); + pllmr0 = mfdcr (CPC0_PLLMR0); + pllmr1 = mfdcr (CPC0_PLLMR1); /* * Determine forward divider A @@ -875,23 +850,6 @@ void get_sys_info (PPC4xx_SYS_INFO * sysInfo) /******************************************** - * get_OPB_freq - * return OPB bus freq in Hz - *********************************************/ -ulong get_OPB_freq (void) -{ - ulong val = 0; - - PPC4xx_SYS_INFO sys_info; - - get_sys_info (&sys_info); - val = sys_info.freqPLB / sys_info.pllOpbDiv; - - return val; -} - - -/******************************************** * get_PCI_freq * return PCI bus freq in Hz *********************************************/ @@ -914,12 +872,13 @@ void get_sys_info (PPC4xx_SYS_INFO * sysInfo) unsigned long sysClkPeriodPs = ONE_BILLION / (CONFIG_SYS_CLK_FREQ/1000); unsigned long primad_cpudv; unsigned long m; + unsigned long plloutb; /* * Read PLL Mode registers */ - mfcpr(cprplld, cpr_plld); - mfcpr(cprpllc, cpr_pllc); + mfcpr(CPR0_PLLD, cpr_plld); + mfcpr(CPR0_PLLC, cpr_pllc); /* * Determine forward divider A @@ -943,7 +902,7 @@ void get_sys_info (PPC4xx_SYS_INFO * sysInfo) /* * Read CPR_PRIMAD register */ - mfcpr(cprprimad, cpr_primad); + mfcpr(CPC0_PRIMAD, cpr_primad); /* * Determine PLB_DIV. @@ -996,26 +955,16 @@ void get_sys_info (PPC4xx_SYS_INFO * sysInfo) sysInfo->freqPLB = (CONFIG_SYS_CLK_FREQ * m) / sysInfo->pllFwdDiv / sysInfo->pllPlbDiv; + sysInfo->freqOPB = (CONFIG_SYS_CLK_FREQ * sysInfo->pllFbkDiv) / + sysInfo->pllOpbDiv; + sysInfo->freqEBC = (CONFIG_SYS_CLK_FREQ * sysInfo->pllFbkDiv) / sysInfo->pllExtBusDiv; - sysInfo->freqUART = sysInfo->freqVCOHz; -} - -/******************************************** - * get_OPB_freq - * return OPB bus freq in Hz - *********************************************/ -ulong get_OPB_freq (void) -{ - ulong val = 0; - - PPC4xx_SYS_INFO sys_info; - - get_sys_info (&sys_info); - val = (CONFIG_SYS_CLK_FREQ * sys_info.pllFbkDiv) / sys_info.pllOpbDiv; - - return val; + plloutb = ((CONFIG_SYS_CLK_FREQ * ((cpr_pllc & PLLC_SRC_MASK) ? + sysInfo->pllFwdDivB : sysInfo->pllFwdDiv) * sysInfo->pllFbkDiv) / + sysInfo->pllFwdDivB); + sysInfo->freqUART = plloutb; } #elif defined(CONFIG_405EX) @@ -1074,7 +1023,7 @@ void get_sys_info (sys_info_t * sysInfo) }; unsigned char sel, cpudv0, plb2xDiv; - mfcpr(cpr0_plld, tmp); + mfcpr(CPR0_PLLD, tmp); /* * Determine forward divider A @@ -1094,29 +1043,29 @@ void get_sys_info (sys_info_t * sysInfo) /* * Determine PERDV0 */ - mfcpr(cpr0_perd, tmp); + mfcpr(CPR0_PERD, tmp); tmp = (tmp >> 24) & 0x03; sysInfo->pllExtBusDiv = (tmp == 0) ? 4 : tmp; /* * Determine OPBDV0 */ - mfcpr(cpr0_opbd, tmp); + mfcpr(CPR0_OPBD, tmp); tmp = (tmp >> 24) & 0x03; sysInfo->pllOpbDiv = (tmp == 0) ? 4 : tmp; /* Determine PLB2XDV0 */ - mfcpr(cpr0_plbd, tmp); + mfcpr(CPR0_PLBD, tmp); tmp = (tmp >> 16) & 0x07; plb2xDiv = (tmp == 0) ? 8 : tmp; /* Determine CPUDV0 */ - mfcpr(cpr0_cpud, tmp); + mfcpr(CPR0_CPUD, tmp); tmp = (tmp >> 24) & 0x07; cpudv0 = (tmp == 0) ? 8 : tmp; /* Determine SEL(5:7) in CPR0_PLLC */ - mfcpr(cpr0_pllc, tmp); + mfcpr(CPR0_PLLC, tmp); sel = (tmp >> 24) & 0x07; /* @@ -1164,22 +1113,6 @@ void get_sys_info (sys_info_t * sysInfo) sysInfo->freqUART = sysInfo->freqPLB; } -/******************************************** - * get_OPB_freq - * return OPB bus freq in Hz - *********************************************/ -ulong get_OPB_freq (void) -{ - ulong val = 0; - - PPC4xx_SYS_INFO sys_info; - - get_sys_info (&sys_info); - val = sys_info.freqPLB / sys_info.pllOpbDiv; - - return val; -} - #endif int get_clocks (void) @@ -1231,3 +1164,14 @@ ulong get_bus_freq (ulong dummy) return val; } + +#if !defined(CONFIG_IOP480) +ulong get_OPB_freq (void) +{ + PPC4xx_SYS_INFO sys_info; + + get_sys_info (&sys_info); + + return sys_info.freqOPB; +} +#endif diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S index f967d8464..287a91224 100644 --- a/cpu/ppc4xx/start.S +++ b/cpu/ppc4xx/start.S @@ -83,64 +83,64 @@ #ifdef CONFIG_SYS_INIT_DCACHE_CS # if (CONFIG_SYS_INIT_DCACHE_CS == 0) -# define PBxAP pb0ap -# define PBxCR pb0cr +# define PBxAP PB1AP +# define PBxCR PB0CR # if (defined(CONFIG_SYS_EBC_PB0AP) && defined(CONFIG_SYS_EBC_PB0CR)) # define PBxAP_VAL CONFIG_SYS_EBC_PB0AP # define PBxCR_VAL CONFIG_SYS_EBC_PB0CR # endif # endif # if (CONFIG_SYS_INIT_DCACHE_CS == 1) -# define PBxAP pb1ap -# define PBxCR pb1cr +# define PBxAP PB1AP +# define PBxCR PB1CR # if (defined(CONFIG_SYS_EBC_PB1AP) && defined(CONFIG_SYS_EBC_PB1CR)) # define PBxAP_VAL CONFIG_SYS_EBC_PB1AP # define PBxCR_VAL CONFIG_SYS_EBC_PB1CR # endif # endif # if (CONFIG_SYS_INIT_DCACHE_CS == 2) -# define PBxAP pb2ap -# define PBxCR pb2cr +# define PBxAP PB2AP +# define PBxCR PB2CR # if (defined(CONFIG_SYS_EBC_PB2AP) && defined(CONFIG_SYS_EBC_PB2CR)) # define PBxAP_VAL CONFIG_SYS_EBC_PB2AP # define PBxCR_VAL CONFIG_SYS_EBC_PB2CR # endif # endif # if (CONFIG_SYS_INIT_DCACHE_CS == 3) -# define PBxAP pb3ap -# define PBxCR pb3cr +# define PBxAP PB3AP +# define PBxCR PB3CR # if (defined(CONFIG_SYS_EBC_PB3AP) && defined(CONFIG_SYS_EBC_PB3CR)) # define PBxAP_VAL CONFIG_SYS_EBC_PB3AP # define PBxCR_VAL CONFIG_SYS_EBC_PB3CR # endif # endif # if (CONFIG_SYS_INIT_DCACHE_CS == 4) -# define PBxAP pb4ap -# define PBxCR pb4cr +# define PBxAP PB4AP +# define PBxCR PB4CR # if (defined(CONFIG_SYS_EBC_PB4AP) && defined(CONFIG_SYS_EBC_PB4CR)) # define PBxAP_VAL CONFIG_SYS_EBC_PB4AP # define PBxCR_VAL CONFIG_SYS_EBC_PB4CR # endif # endif # if (CONFIG_SYS_INIT_DCACHE_CS == 5) -# define PBxAP pb5ap -# define PBxCR pb5cr +# define PBxAP PB5AP +# define PBxCR PB5CR # if (defined(CONFIG_SYS_EBC_PB5AP) && defined(CONFIG_SYS_EBC_PB5CR)) # define PBxAP_VAL CONFIG_SYS_EBC_PB5AP # define PBxCR_VAL CONFIG_SYS_EBC_PB5CR # endif # endif # if (CONFIG_SYS_INIT_DCACHE_CS == 6) -# define PBxAP pb6ap -# define PBxCR pb6cr +# define PBxAP PB6AP +# define PBxCR PB6CR # if (defined(CONFIG_SYS_EBC_PB6AP) && defined(CONFIG_SYS_EBC_PB6CR)) # define PBxAP_VAL CONFIG_SYS_EBC_PB6AP # define PBxCR_VAL CONFIG_SYS_EBC_PB6CR # endif # endif # if (CONFIG_SYS_INIT_DCACHE_CS == 7) -# define PBxAP pb7ap -# define PBxCR pb7cr +# define PBxAP PB7AP +# define PBxCR PB7CR # if (defined(CONFIG_SYS_EBC_PB7AP) && defined(CONFIG_SYS_EBC_PB7CR)) # define PBxAP_VAL CONFIG_SYS_EBC_PB7AP # define PBxCR_VAL CONFIG_SYS_EBC_PB7CR @@ -998,7 +998,7 @@ _start: /*----------------------------------------------------------------------- */ addis r3,r0, 0xFFFF /* Clear all existing DMA status */ ori r3,r3, 0xFFFF - mtdcr dmasr, r3 + mtdcr DMASR, r3 bl ppc405ep_init /* do ppc405ep specific init */ #endif /* CONFIG_405EP */ @@ -1015,21 +1015,21 @@ _start: lis r3,CONFIG_SYS_OCM_DATA_ADDR@h /* OCM location */ ori r3,r3,CONFIG_SYS_OCM_DATA_ADDR@l ori r3,r3,0x0270 /* 16K for Bank 1, R/W/Enable */ - mtdcr ocmplb3cr1,r3 /* Set PLB Access */ + mtdcr OCM0_PLBCR1,r3 /* Set PLB Access */ ori r3,r3,0x4000 /* Add 0x4000 for bank 2 */ - mtdcr ocmplb3cr2,r3 /* Set PLB Access */ + mtdcr OCM0_PLBCR2,r3 /* Set PLB Access */ isync lis r3,CONFIG_SYS_OCM_DATA_ADDR@h /* OCM location */ ori r3,r3,CONFIG_SYS_OCM_DATA_ADDR@l ori r3,r3,0x0270 /* 16K for Bank 1, R/W/Enable */ - mtdcr ocmdscr1, r3 /* Set Data Side */ - mtdcr ocmiscr1, r3 /* Set Instruction Side */ + mtdcr OCM0_DSRC1, r3 /* Set Data Side */ + mtdcr OCM0_ISRC1, r3 /* Set Instruction Side */ ori r3,r3,0x4000 /* Add 0x4000 for bank 2 */ - mtdcr ocmdscr2, r3 /* Set Data Side */ - mtdcr ocmiscr2, r3 /* Set Instruction Side */ + mtdcr OCM0_DSRC2, r3 /* Set Data Side */ + mtdcr OCM0_ISRC2, r3 /* Set Instruction Side */ addis r3,0,0x0800 /* OCM Data Parity Disable - 1 Wait State */ - mtdcr ocmdsisdpc,r3 + mtdcr OCM0_DISDPC,r3 isync #else /* CONFIG_405EZ */ @@ -1039,19 +1039,19 @@ _start: /* Setup OCM */ lis r0, 0x7FFF ori r0, r0, 0xFFFF - mfdcr r3, ocmiscntl /* get instr-side IRAM config */ - mfdcr r4, ocmdscntl /* get data-side IRAM config */ + mfdcr r3, OCM0_ISCNTL /* get instr-side IRAM config */ + mfdcr r4, OCM0_DSCNTL /* get data-side IRAM config */ and r3, r3, r0 /* disable data-side IRAM */ and r4, r4, r0 /* disable data-side IRAM */ - mtdcr ocmiscntl, r3 /* set instr-side IRAM config */ - mtdcr ocmdscntl, r4 /* set data-side IRAM config */ + mtdcr OCM0_ISCNTL, r3 /* set instr-side IRAM config */ + mtdcr OCM0_DSCNTL, r4 /* set data-side IRAM config */ isync lis r3,CONFIG_SYS_OCM_DATA_ADDR@h /* OCM location */ ori r3,r3,CONFIG_SYS_OCM_DATA_ADDR@l - mtdcr ocmdsarc, r3 + mtdcr OCM0_DSARC, r3 addis r4, 0, 0xC000 /* OCM data area enabled */ - mtdcr ocmdscntl, r4 + mtdcr OCM0_DSCNTL, r4 isync #endif /* CONFIG_405EZ */ #endif @@ -1061,16 +1061,16 @@ _start: /*----------------------------------------------------------------------- */ #ifdef CONFIG_SYS_INIT_DCACHE_CS li r4, PBxAP - mtdcr ebccfga, r4 + mtdcr EBC0_CFGADDR, r4 lis r4, CONFIG_SYS_INIT_DCACHE_PBxAR@h ori r4, r4, CONFIG_SYS_INIT_DCACHE_PBxAR@l - mtdcr ebccfgd, r4 + mtdcr EBC0_CFGDATA, r4 addi r4, 0, PBxCR - mtdcr ebccfga, r4 + mtdcr EBC0_CFGADDR, r4 lis r4, CONFIG_SYS_INIT_DCACHE_PBxCR@h ori r4, r4, CONFIG_SYS_INIT_DCACHE_PBxCR@l - mtdcr ebccfgd, r4 + mtdcr EBC0_CFGDATA, r4 /* * Enable the data cache for the 128MB storage access control region @@ -1428,16 +1428,16 @@ relocate_code: /* Restore the EBC parameters */ li r3, PBxAP - mtdcr ebccfga, r3 + mtdcr EBC0_CFGADDR, r3 lis r3, PBxAP_VAL@h ori r3, r3, PBxAP_VAL@l - mtdcr ebccfgd, r3 + mtdcr EBC0_CFGDATA, r3 li r3, PBxCR - mtdcr ebccfga, r3 + mtdcr EBC0_CFGADDR, r3 lis r3, PBxCR_VAL@h ori r3, r3, PBxCR_VAL@l - mtdcr ebccfgd, r3 + mtdcr EBC0_CFGDATA, r3 #endif /* defined(CONFIG_SYS_INIT_DCACHE_CS) */ /* Restore registers */ @@ -1860,38 +1860,38 @@ ppc405ep_init: ori r4,r4,CONFIG_SYS_GPIO0_TCR@l stw r4,0(r3) - li r3,pb1ap /* program EBC bank 1 for RTC access */ - mtdcr ebccfga,r3 + li r3,PB1AP /* program EBC bank 1 for RTC access */ + mtdcr EBC0_CFGADDR,r3 lis r3,CONFIG_SYS_EBC_PB1AP@h ori r3,r3,CONFIG_SYS_EBC_PB1AP@l - mtdcr ebccfgd,r3 - li r3,pb1cr - mtdcr ebccfga,r3 + mtdcr EBC0_CFGDATA,r3 + li r3,PB1CR + mtdcr EBC0_CFGADDR,r3 lis r3,CONFIG_SYS_EBC_PB1CR@h ori r3,r3,CONFIG_SYS_EBC_PB1CR@l - mtdcr ebccfgd,r3 + mtdcr EBC0_CFGDATA,r3 - li r3,pb1ap /* program EBC bank 1 for RTC access */ - mtdcr ebccfga,r3 + li r3,PB1AP /* program EBC bank 1 for RTC access */ + mtdcr EBC0_CFGADDR,r3 lis r3,CONFIG_SYS_EBC_PB1AP@h ori r3,r3,CONFIG_SYS_EBC_PB1AP@l - mtdcr ebccfgd,r3 - li r3,pb1cr - mtdcr ebccfga,r3 + mtdcr EBC0_CFGDATA,r3 + li r3,PB1CR + mtdcr EBC0_CFGADDR,r3 lis r3,CONFIG_SYS_EBC_PB1CR@h ori r3,r3,CONFIG_SYS_EBC_PB1CR@l - mtdcr ebccfgd,r3 + mtdcr EBC0_CFGDATA,r3 - li r3,pb4ap /* program EBC bank 4 for FPGA access */ - mtdcr ebccfga,r3 + li r3,PB4AP /* program EBC bank 4 for FPGA access */ + mtdcr EBC0_CFGADDR,r3 lis r3,CONFIG_SYS_EBC_PB4AP@h ori r3,r3,CONFIG_SYS_EBC_PB4AP@l - mtdcr ebccfgd,r3 - li r3,pb4cr - mtdcr ebccfga,r3 + mtdcr EBC0_CFGDATA,r3 + li r3,PB4CR + mtdcr EBC0_CFGADDR,r3 lis r3,CONFIG_SYS_EBC_PB4CR@h ori r3,r3,CONFIG_SYS_EBC_PB4CR@l - mtdcr ebccfgd,r3 + mtdcr EBC0_CFGDATA,r3 #endif /* diff --git a/cpu/ppc4xx/usbdev.c b/cpu/ppc4xx/usbdev.c index faf7f0878..5bb4f3ce6 100644 --- a/cpu/ppc4xx/usbdev.c +++ b/cpu/ppc4xx/usbdev.c @@ -206,14 +206,14 @@ void usb_dev_init() #ifdef USB_2_0_DEVICE printf("USB 2.0 Device init\n"); /*select 2.0 device */ - mtsdr(sdr_usb0, 0x0); /* 2.0 */ + mtsdr(SDR0_USB0, 0x0); /* 2.0 */ /*usb dev init */ *(unsigned char *)USB2D0_POWER_8 = 0xa1; /* 2.0 */ #else printf("USB 1.1 Device init\n"); /*select 1.1 device */ - mtsdr(sdr_usb0, 0x2); /* 1.1 */ + mtsdr(SDR0_USB0, 0x2); /* 1.1 */ /*usb dev init */ *(unsigned char *)USB2D0_POWER_8 = 0xc0; /* 1.1 */ diff --git a/doc/README.NetConsole b/doc/README.NetConsole index 639cc12a5..c8bcb90a3 100644 --- a/doc/README.NetConsole +++ b/doc/README.NetConsole @@ -36,27 +36,9 @@ you can just remove the -p option from the script. It turns out that 'netcat' cannot be used to listen to broadcast packets. We developed our own tool 'ncb' (see tools directory) that listens to broadcast packets on a given port and dumps them to the -standard output. use it as follows: - -+++++++++++++++++++++++++++++++++++++++++++ -#! /bin/bash - -[ $# = 1 ] || { echo "Usage: $0 target_ip" >&2 ; exit 1 ; } -TARGET_IP=$1 - -stty icanon echo intr ^T -./ncb & -nc -u ${TARGET_IP} 6666 -stty icanon echo intr ^C -kill 0 -+++++++++++++++++++++++++++++++++++++++++++ - -Again, this script takes exactly one argument, which is interpreted -as the target IP address (or host name, assuming DNS is working). The -script can be interrupted by pressing ^T (CTRL-T). - -The 'ncb' tool can be found in the tools directory; it will be built -when compiling for a board which has CONFIG_NETCONSOLE defined. +standard output. It will be built when compiling for a board which +has CONFIG_NETCONSOLE defined. If the netconsole script can find it +in PATH or in the same directory, it will be used instead. For Linux, the network-based console needs special configuration. Minimally, the host IP address needs to be specified. This can be diff --git a/drivers/misc/fsl_law.c b/drivers/misc/fsl_law.c index 7bdd355c7..aa877c65f 100644 --- a/drivers/misc/fsl_law.c +++ b/drivers/misc/fsl_law.c @@ -74,6 +74,7 @@ int set_next_law(phys_addr_t addr, enum law_size sz, enum law_trgt_if id) return idx; } +#ifndef CONFIG_NAND_SPL int set_last_law(phys_addr_t addr, enum law_size sz, enum law_trgt_if id) { u32 idx; @@ -166,6 +167,7 @@ int set_ddr_laws(u64 start, u64 sz, enum law_trgt_if id) return 0; } +#endif void init_laws(void) { diff --git a/drivers/mtd/nand/ndfc.c b/drivers/mtd/nand/ndfc.c index 0891936f0..0dd678958 100644 --- a/drivers/mtd/nand/ndfc.c +++ b/drivers/mtd/nand/ndfc.c @@ -207,8 +207,8 @@ int board_nand_init(struct nand_chip *nand) */ mtebc(EBC0_CFG, 0xb8400000); - mtebc(pb0cr, CONFIG_SYS_EBC_PB0CR); - mtebc(pb0ap, CONFIG_SYS_EBC_PB0AP); + mtebc(PB0CR, CONFIG_SYS_EBC_PB0CR); + mtebc(PB0AP, CONFIG_SYS_EBC_PB0AP); #endif chip++; diff --git a/drivers/net/4xx_enet.c b/drivers/net/4xx_enet.c index 329eef07d..afd108415 100644 --- a/drivers/net/4xx_enet.c +++ b/drivers/net/4xx_enet.c @@ -319,9 +319,9 @@ static void emac_loopback_enable(EMAC_4XX_HW_PST hw_p) defined(CONFIG_405EX) u32 val; - mfsdr(sdr_mfr, val); + mfsdr(SDR0_MFR, val); val |= SDR0_MFR_ETH_CLK_SEL_V(hw_p->devnum); - mtsdr(sdr_mfr, val); + mtsdr(SDR0_MFR, val); #elif defined(CONFIG_460EX) || defined(CONFIG_460GT) u32 val; @@ -338,9 +338,9 @@ static void emac_loopback_disable(EMAC_4XX_HW_PST hw_p) defined(CONFIG_405EX) u32 val; - mfsdr(sdr_mfr, val); + mfsdr(SDR0_MFR, val); val &= ~SDR0_MFR_ETH_CLK_SEL_V(hw_p->devnum); - mtsdr(sdr_mfr, val); + mtsdr(SDR0_MFR, val); #elif defined(CONFIG_460EX) || defined(CONFIG_460GT) u32 val; @@ -364,14 +364,14 @@ static void ppc_4xx_eth_halt (struct eth_device *dev) /* 1st reset MAL channel */ /* Note: writing a 0 to a channel has no effect */ #if defined(CONFIG_405EP) || defined(CONFIG_440EP) || defined(CONFIG_440GR) - mtdcr (maltxcarr, (MAL_CR_MMSR >> (hw_p->devnum * 2))); + mtdcr (MAL0_TXCARR, (MAL_CR_MMSR >> (hw_p->devnum * 2))); #else - mtdcr (maltxcarr, (MAL_CR_MMSR >> hw_p->devnum)); + mtdcr (MAL0_TXCARR, (MAL_CR_MMSR >> hw_p->devnum)); #endif - mtdcr (malrxcarr, (MAL_CR_MMSR >> hw_p->devnum)); + mtdcr (MAL0_RXCARR, (MAL_CR_MMSR >> hw_p->devnum)); /* wait for reset */ - while (mfdcr (malrxcasr) & (MAL_CR_MMSR >> hw_p->devnum)) { + while (mfdcr (MAL0_RXCASR) & (MAL_CR_MMSR >> hw_p->devnum)) { udelay (1000); /* Delay 1 MS so as not to hammer the register */ val--; if (val == 0) @@ -408,7 +408,7 @@ int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis) unsigned long zmiifer; unsigned long rmiifer; - mfsdr(sdr_pfc1, pfc1); + mfsdr(SDR0_PFC1, pfc1); pfc1 = SDR0_PFC1_EPS_DECODE(pfc1); zmiifer = 0; @@ -498,7 +498,7 @@ int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis) unsigned long zmiifer=0x0; unsigned long pfc1; - mfsdr(sdr_pfc1, pfc1); + mfsdr(SDR0_PFC1, pfc1); pfc1 &= SDR0_PFC1_SELECT_MASK; switch (pfc1) { @@ -1240,13 +1240,13 @@ get_speed: !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX) && \ !defined(CONFIG_460EX) && !defined(CONFIG_460GT) #if defined(CONFIG_440EP) || defined(CONFIG_440GR) - mfsdr(sdr_mfr, reg); + mfsdr(SDR0_MFR, reg); if (speed == 100) { reg = (reg & ~SDR0_MFR_ZMII_MODE_MASK) | SDR0_MFR_ZMII_MODE_RMII_100M; } else { reg = (reg & ~SDR0_MFR_ZMII_MODE_MASK) | SDR0_MFR_ZMII_MODE_RMII_10M; } - mtsdr(sdr_mfr, reg); + mtsdr(SDR0_MFR, reg); #endif /* Set ZMII/RGMII speed according to the phy link speed */ @@ -1302,13 +1302,13 @@ get_speed: defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \ defined(CONFIG_460EX) || defined(CONFIG_460GT) || \ defined(CONFIG_405EX) - mtdcr (malmcr, MAL_CR_PLBB | MAL_CR_OPBBL | MAL_CR_LEA | + mtdcr (MAL0_CFG, MAL_CR_PLBB | MAL_CR_OPBBL | MAL_CR_LEA | MAL_CR_PLBLT_DEFAULT | MAL_CR_EOPIE | 0x00330000); #else - mtdcr (malmcr, MAL_CR_PLBB | MAL_CR_OPBBL | MAL_CR_LEA | MAL_CR_PLBLT_DEFAULT); + mtdcr (MAL0_CFG, MAL_CR_PLBB | MAL_CR_OPBBL | MAL_CR_LEA | MAL_CR_PLBLT_DEFAULT); /* Errata 1.12: MAL_1 -- Disable MAL bursting */ if (get_pvr() == PVR_440GP_RB) { - mtdcr (malmcr, mfdcr(malmcr) & ~MAL_CR_PLBB); + mtdcr (MAL0_CFG, mfdcr(MAL0_CFG) & ~MAL_CR_PLBB); } #endif @@ -1398,86 +1398,86 @@ get_speed: case 1: /* setup MAL tx & rx channel pointers */ #if defined (CONFIG_405EP) || defined (CONFIG_440EP) || defined (CONFIG_440GR) - mtdcr (maltxctp2r, hw_p->tx_phys); + mtdcr (MAL0_TXCTP2R, hw_p->tx_phys); #else - mtdcr (maltxctp1r, hw_p->tx_phys); + mtdcr (MAL0_TXCTP1R, hw_p->tx_phys); #endif #if defined(CONFIG_440) - mtdcr (maltxbattr, 0x0); - mtdcr (malrxbattr, 0x0); + mtdcr (MAL0_TXBADDR, 0x0); + mtdcr (MAL0_RXBADDR, 0x0); #endif #if defined(CONFIG_460EX) || defined(CONFIG_460GT) - mtdcr (malrxctp8r, hw_p->rx_phys); + mtdcr (MAL0_RXCTP8R, hw_p->rx_phys); /* set RX buffer size */ - mtdcr (malrcbs8, ENET_MAX_MTU_ALIGNED / 16); + mtdcr (MAL0_RCBS8, ENET_MAX_MTU_ALIGNED / 16); #else - mtdcr (malrxctp1r, hw_p->rx_phys); + mtdcr (MAL0_RXCTP1R, hw_p->rx_phys); /* set RX buffer size */ - mtdcr (malrcbs1, ENET_MAX_MTU_ALIGNED / 16); + mtdcr (MAL0_RCBS1, ENET_MAX_MTU_ALIGNED / 16); #endif break; #if defined (CONFIG_440GX) case 2: /* setup MAL tx & rx channel pointers */ - mtdcr (maltxbattr, 0x0); - mtdcr (malrxbattr, 0x0); - mtdcr (maltxctp2r, hw_p->tx_phys); - mtdcr (malrxctp2r, hw_p->rx_phys); + mtdcr (MAL0_TXBADDR, 0x0); + mtdcr (MAL0_RXBADDR, 0x0); + mtdcr (MAL0_TXCTP2R, hw_p->tx_phys); + mtdcr (MAL0_RXCTP2R, hw_p->rx_phys); /* set RX buffer size */ - mtdcr (malrcbs2, ENET_MAX_MTU_ALIGNED / 16); + mtdcr (MAL0_RCBS2, ENET_MAX_MTU_ALIGNED / 16); break; case 3: /* setup MAL tx & rx channel pointers */ - mtdcr (maltxbattr, 0x0); - mtdcr (maltxctp3r, hw_p->tx_phys); - mtdcr (malrxbattr, 0x0); - mtdcr (malrxctp3r, hw_p->rx_phys); + mtdcr (MAL0_TXBADDR, 0x0); + mtdcr (MAL0_TXCTP3R, hw_p->tx_phys); + mtdcr (MAL0_RXBADDR, 0x0); + mtdcr (MAL0_RXCTP3R, hw_p->rx_phys); /* set RX buffer size */ - mtdcr (malrcbs3, ENET_MAX_MTU_ALIGNED / 16); + mtdcr (MAL0_RCBS3, ENET_MAX_MTU_ALIGNED / 16); break; #endif /* CONFIG_440GX */ #if defined (CONFIG_460GT) case 2: /* setup MAL tx & rx channel pointers */ - mtdcr (maltxbattr, 0x0); - mtdcr (malrxbattr, 0x0); - mtdcr (maltxctp2r, hw_p->tx_phys); - mtdcr (malrxctp16r, hw_p->rx_phys); + mtdcr (MAL0_TXBADDR, 0x0); + mtdcr (MAL0_RXBADDR, 0x0); + mtdcr (MAL0_TXCTP2R, hw_p->tx_phys); + mtdcr (MAL0_RXCTP16R, hw_p->rx_phys); /* set RX buffer size */ - mtdcr (malrcbs16, ENET_MAX_MTU_ALIGNED / 16); + mtdcr (MAL0_RCBS16, ENET_MAX_MTU_ALIGNED / 16); break; case 3: /* setup MAL tx & rx channel pointers */ - mtdcr (maltxbattr, 0x0); - mtdcr (malrxbattr, 0x0); - mtdcr (maltxctp3r, hw_p->tx_phys); - mtdcr (malrxctp24r, hw_p->rx_phys); + mtdcr (MAL0_TXBADDR, 0x0); + mtdcr (MAL0_RXBADDR, 0x0); + mtdcr (MAL0_TXCTP3R, hw_p->tx_phys); + mtdcr (MAL0_RXCTP24R, hw_p->rx_phys); /* set RX buffer size */ - mtdcr (malrcbs24, ENET_MAX_MTU_ALIGNED / 16); + mtdcr (MAL0_RCBS24, ENET_MAX_MTU_ALIGNED / 16); break; #endif /* CONFIG_460GT */ case 0: default: /* setup MAL tx & rx channel pointers */ #if defined(CONFIG_440) - mtdcr (maltxbattr, 0x0); - mtdcr (malrxbattr, 0x0); + mtdcr (MAL0_TXBADDR, 0x0); + mtdcr (MAL0_RXBADDR, 0x0); #endif - mtdcr (maltxctp0r, hw_p->tx_phys); - mtdcr (malrxctp0r, hw_p->rx_phys); + mtdcr (MAL0_TXCTP0R, hw_p->tx_phys); + mtdcr (MAL0_RXCTP0R, hw_p->rx_phys); /* set RX buffer size */ - mtdcr (malrcbs0, ENET_MAX_MTU_ALIGNED / 16); + mtdcr (MAL0_RCBS0, ENET_MAX_MTU_ALIGNED / 16); break; } /* Enable MAL transmit and receive channels */ #if defined(CONFIG_405EP) || defined(CONFIG_440EP) || defined(CONFIG_440GR) - mtdcr (maltxcasr, (MAL_TXRX_CASR >> (hw_p->devnum*2))); + mtdcr (MAL0_TXCASR, (MAL_TXRX_CASR >> (hw_p->devnum*2))); #else - mtdcr (maltxcasr, (MAL_TXRX_CASR >> hw_p->devnum)); + mtdcr (MAL0_TXCASR, (MAL_TXRX_CASR >> hw_p->devnum)); #endif - mtdcr (malrxcasr, (MAL_TXRX_CASR >> hw_p->devnum)); + mtdcr (MAL0_RXCASR, (MAL_TXRX_CASR >> hw_p->devnum)); /* set transmit enable & receive enable */ out_be32((void *)EMAC_M0 + hw_p->hw_addr, EMAC_M0_TXE | EMAC_M0_RXE); @@ -1493,9 +1493,9 @@ get_speed: defined(CONFIG_440SP) || defined(CONFIG_440SPE) unsigned long pfc1; - mfsdr (sdr_pfc1, pfc1); + mfsdr (SDR0_PFC1, pfc1); pfc1 |= SDR0_PFC1_EM_1000; - mtsdr (sdr_pfc1, pfc1); + mtsdr (SDR0_PFC1, pfc1); #endif mode_reg = mode_reg | EMAC_M1_MF_1000MBPS | EMAC_M1_IST; } else if (speed == _100BASET) @@ -1665,7 +1665,7 @@ int enetInt (struct eth_device *dev) /* look at MAL and EMAC error interrupts */ if (uic_mal_err & (UIC_MAL_SERR | UIC_MAL_TXDE | UIC_MAL_RXDE)) { /* we have a MAL error interrupt */ - mal_isr = mfdcr(malesr); + mal_isr = mfdcr(MAL0_ESR); mal_err(dev, mal_isr, uic_mal_err, MAL_UIC_DEF, MAL_UIC_ERR); @@ -1691,8 +1691,8 @@ int enetInt (struct eth_device *dev) /* handle MAX TX EOB interrupt from a tx */ if (uic_mal & UIC_MAL_TXEOB) { /* clear MAL interrupt status bits */ - mal_eob = mfdcr(maltxeobisr); - mtdcr(maltxeobisr, mal_eob); + mal_eob = mfdcr(MAL0_TXEOBISR); + mtdcr(MAL0_TXEOBISR, mal_eob); mtdcr(UIC_BASE_MAL + UIC_SR, UIC_MAL_TXEOB); /* indicate that we serviced an interrupt */ @@ -1703,7 +1703,7 @@ int enetInt (struct eth_device *dev) /* handle MAL RX EOB interupt from a receive */ /* check for EOB on valid channels */ if (uic_mal & UIC_MAL_RXEOB) { - mal_eob = mfdcr(malrxeobisr); + mal_eob = mfdcr(MAL0_RXEOBISR); if (mal_eob & (0x80000000 >> (hw_p->devnum * MAL_RX_CHAN_MUL))) { /* push packet to upper layer */ @@ -1731,11 +1731,11 @@ static void mal_err (struct eth_device *dev, unsigned long isr, { EMAC_4XX_HW_PST hw_p = dev->priv; - mtdcr (malesr, isr); /* clear interrupt */ + mtdcr (MAL0_ESR, isr); /* clear interrupt */ /* clear DE interrupt */ - mtdcr (maltxdeir, 0xC0000000); - mtdcr (malrxdeir, 0x80000000); + mtdcr (MAL0_TXDEIR, 0xC0000000); + mtdcr (MAL0_RXDEIR, 0x80000000); #ifdef INFO_4XX_ENET printf ("\nMAL error occured.... ISR = %lx UIC = = %lx MAL_DEF = %lx MAL_ERR= %lx \n", isr, uic, maldef, mal_errr); @@ -1769,10 +1769,10 @@ static void enet_rcv (struct eth_device *dev, unsigned long malisr) int i; int loop_count = 0; - rx_eob_isr = mfdcr (malrxeobisr); + rx_eob_isr = mfdcr (MAL0_RXEOBISR); if ((0x80000000 >> (hw_p->devnum * MAL_RX_CHAN_MUL)) & rx_eob_isr) { /* clear EOB */ - mtdcr (malrxeobisr, rx_eob_isr); + mtdcr (MAL0_RXEOBISR, rx_eob_isr); /* EMAC RX done */ while (1) { /* do all */ @@ -1912,10 +1912,10 @@ int ppc_4xx_eth_initialize (bd_t * bis) #if defined(CONFIG_440GX) unsigned long pfc1; - mfsdr (sdr_pfc1, pfc1); + mfsdr (SDR0_PFC1, pfc1); pfc1 &= ~(0x01e00000); pfc1 |= 0x01200000; - mtsdr (sdr_pfc1, pfc1); + mtsdr (SDR0_PFC1, pfc1); #endif /* first clear all mac-addresses */ @@ -2036,10 +2036,10 @@ int ppc_4xx_eth_initialize (bd_t * bis) MAL_IER_DE | MAL_IER_NE | MAL_IER_TE | MAL_IER_OPBE | MAL_IER_PLBE; #endif - mtdcr (malesr, 0xffffffff); /* clear pending interrupts */ - mtdcr (maltxdeir, 0xffffffff); /* clear pending interrupts */ - mtdcr (malrxdeir, 0xffffffff); /* clear pending interrupts */ - mtdcr (malier, mal_ier); + mtdcr (MAL0_ESR, 0xffffffff); /* clear pending interrupts */ + mtdcr (MAL0_TXDEIR, 0xffffffff); /* clear pending interrupts */ + mtdcr (MAL0_RXDEIR, 0xffffffff); /* clear pending interrupts */ + mtdcr (MAL0_IER, mal_ier); /* install MAL interrupt handler */ irq_install_handler (VECNUM_MAL_SERR, diff --git a/drivers/net/Makefile b/drivers/net/Makefile index f6e9f6796..be5c484d1 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -72,7 +72,6 @@ COBJS-$(CONFIG_TSEC_ENET) += tsec.o COBJS-$(CONFIG_TSI108_ETH) += tsi108_eth.o COBJS-$(CONFIG_ULI526X) += uli526x.o COBJS-$(CONFIG_VSC7385_ENET) += vsc7385.o -COBJS-$(CONFIG_XILINX_EMAC) += xilinx_emac.o COBJS-$(CONFIG_XILINX_EMACLITE) += xilinx_emaclite.o COBJS := $(COBJS-y) diff --git a/drivers/net/xilinx_emac.c b/drivers/net/xilinx_emac.c deleted file mode 100644 index a489aa97f..000000000 --- a/drivers/net/xilinx_emac.c +++ /dev/null @@ -1,464 +0,0 @@ -/****************************************************************************** - * - * XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" - * AS A COURTESY TO YOU, SOLELY FOR USE IN DEVELOPING PROGRAMS AND - * SOLUTIONS FOR XILINX DEVICES. BY PROVIDING THIS DESIGN, CODE, - * OR INFORMATION AS ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, - * APPLICATION OR STANDARD, XILINX IS MAKING NO REPRESENTATION - * THAT THIS IMPLEMENTATION IS FREE FROM ANY CLAIMS OF INFRINGEMENT, - * AND YOU ARE RESPONSIBLE FOR OBTAINING ANY RIGHTS YOU MAY REQUIRE - * FOR YOUR IMPLEMENTATION. XILINX EXPRESSLY DISCLAIMS ANY - * WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE - * IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR - * REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF - * INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE. - * - * (C) Copyright 2007-2008 Michal Simek - * Michal SIMEK <monstr@monstr.eu> - * - * (c) Copyright 2003 Xilinx Inc. - * All rights reserved. - * - ******************************************************************************/ - -#include <config.h> -#include <common.h> -#include <net.h> -#include <asm/io.h> - -#include <asm/asm.h> - -#undef DEBUG - -typedef struct { - u32 regbaseaddress; /* Base address of registers */ - u32 databaseaddress; /* Base address of data for FIFOs */ -} xpacketfifov100b; - -typedef struct { - u32 baseaddress; /* Base address (of IPIF) */ - u32 isstarted; /* Device is currently started 0-no, 1-yes */ - xpacketfifov100b recvfifo; /* FIFO used to receive frames */ - xpacketfifov100b sendfifo; /* FIFO used to send frames */ -} xemac; - -#define XIIF_V123B_IISR_OFFSET 32UL /* IP interrupt status register */ -#define XIIF_V123B_RESET_MASK 0xAUL -#define XIIF_V123B_RESETR_OFFSET 64UL /* reset register */ - -/* This constant is used with the Reset Register */ -#define XPF_RESET_FIFO_MASK 0x0000000A -#define XPF_COUNT_STATUS_REG_OFFSET 4UL - -/* These constants are used with the Occupancy/Vacancy Count Register. This - * register also contains FIFO status */ -#define XPF_COUNT_MASK 0x0000FFFF -#define XPF_DEADLOCK_MASK 0x20000000 - -/* Offset of the MAC registers from the IPIF base address */ -#define XEM_REG_OFFSET 0x1100UL - -/* - * Register offsets for the Ethernet MAC. Each register is 32 bits. - */ -#define XEM_ECR_OFFSET (XEM_REG_OFFSET + 0x4) /* MAC Control */ -#define XEM_SAH_OFFSET (XEM_REG_OFFSET + 0xC) /* Station addr, high */ -#define XEM_SAL_OFFSET (XEM_REG_OFFSET + 0x10) /* Station addr, low */ -#define XEM_RPLR_OFFSET (XEM_REG_OFFSET + 0x1C) /* Rx packet length */ -#define XEM_TPLR_OFFSET (XEM_REG_OFFSET + 0x20) /* Tx packet length */ -#define XEM_TSR_OFFSET (XEM_REG_OFFSET + 0x24) /* Tx status */ - -#define XEM_PFIFO_OFFSET 0x2000UL -/* Tx registers */ -#define XEM_PFIFO_TXREG_OFFSET (XEM_PFIFO_OFFSET + 0x0) -/* Rx registers */ -#define XEM_PFIFO_RXREG_OFFSET (XEM_PFIFO_OFFSET + 0x10) -/* Tx keyhole */ -#define XEM_PFIFO_TXDATA_OFFSET (XEM_PFIFO_OFFSET + 0x100) -/* Rx keyhole */ -#define XEM_PFIFO_RXDATA_OFFSET (XEM_PFIFO_OFFSET + 0x200) - -/* - * EMAC Interrupt Registers (Status and Enable) masks. These registers are - * part of the IPIF IP Interrupt registers - */ -/* A mask for all transmit interrupts, used in polled mode */ -#define XEM_EIR_XMIT_ALL_MASK (XEM_EIR_XMIT_DONE_MASK |\ - XEM_EIR_XMIT_ERROR_MASK | \ - XEM_EIR_XMIT_SFIFO_EMPTY_MASK |\ - XEM_EIR_XMIT_LFIFO_FULL_MASK) - -/* Xmit complete */ -#define XEM_EIR_XMIT_DONE_MASK 0x00000001UL -/* Recv complete */ -#define XEM_EIR_RECV_DONE_MASK 0x00000002UL -/* Xmit error */ -#define XEM_EIR_XMIT_ERROR_MASK 0x00000004UL -/* Recv error */ -#define XEM_EIR_RECV_ERROR_MASK 0x00000008UL -/* Xmit status fifo empty */ -#define XEM_EIR_XMIT_SFIFO_EMPTY_MASK 0x00000010UL -/* Recv length fifo empty */ -#define XEM_EIR_RECV_LFIFO_EMPTY_MASK 0x00000020UL -/* Xmit length fifo full */ -#define XEM_EIR_XMIT_LFIFO_FULL_MASK 0x00000040UL -/* Recv length fifo overrun */ -#define XEM_EIR_RECV_LFIFO_OVER_MASK 0x00000080UL -/* Recv length fifo underrun */ -#define XEM_EIR_RECV_LFIFO_UNDER_MASK 0x00000100UL -/* Xmit status fifo overrun */ -#define XEM_EIR_XMIT_SFIFO_OVER_MASK 0x00000200UL -/* Transmit status fifo underrun */ -#define XEM_EIR_XMIT_SFIFO_UNDER_MASK 0x00000400UL -/* Transmit length fifo overrun */ -#define XEM_EIR_XMIT_LFIFO_OVER_MASK 0x00000800UL -/* Transmit length fifo underrun */ -#define XEM_EIR_XMIT_LFIFO_UNDER_MASK 0x00001000UL -/* Transmit pause pkt received */ -#define XEM_EIR_XMIT_PAUSE_MASK 0x00002000UL - -/* - * EMAC Control Register (ECR) - */ -/* Full duplex mode */ -#define XEM_ECR_FULL_DUPLEX_MASK 0x80000000UL -/* Reset transmitter */ -#define XEM_ECR_XMIT_RESET_MASK 0x40000000UL -/* Enable transmitter */ -#define XEM_ECR_XMIT_ENABLE_MASK 0x20000000UL -/* Reset receiver */ -#define XEM_ECR_RECV_RESET_MASK 0x10000000UL -/* Enable receiver */ -#define XEM_ECR_RECV_ENABLE_MASK 0x08000000UL -/* Enable PHY */ -#define XEM_ECR_PHY_ENABLE_MASK 0x04000000UL -/* Enable xmit pad insert */ -#define XEM_ECR_XMIT_PAD_ENABLE_MASK 0x02000000UL -/* Enable xmit FCS insert */ -#define XEM_ECR_XMIT_FCS_ENABLE_MASK 0x01000000UL -/* Enable unicast addr */ -#define XEM_ECR_UNICAST_ENABLE_MASK 0x00020000UL -/* Enable broadcast addr */ -#define XEM_ECR_BROAD_ENABLE_MASK 0x00008000UL - -/* - * Transmit Status Register (TSR) - */ -/* Transmit excess deferral */ -#define XEM_TSR_EXCESS_DEFERRAL_MASK 0x80000000UL -/* Transmit late collision */ -#define XEM_TSR_LATE_COLLISION_MASK 0x01000000UL - -#define ENET_MAX_MTU PKTSIZE -#define ENET_ADDR_LENGTH 6 - -static unsigned int etherrxbuff[PKTSIZE_ALIGN/4]; /* Receive buffer */ - -static u8 emacaddr[ENET_ADDR_LENGTH] = { 0x00, 0x0a, 0x35, 0x00, 0x22, 0x01 }; - -static xemac emac; - -void eth_halt(void) -{ - debug ("eth_halt\n"); -} - -int eth_init(bd_t * bis) -{ - uchar enetaddr[6]; - u32 helpreg; - debug ("EMAC Initialization Started\n\r"); - - if (emac.isstarted) { - puts("Emac is started\n"); - return 0; - } - - memset (&emac, 0, sizeof (xemac)); - - emac.baseaddress = XILINX_EMAC_BASEADDR; - - /* Setting up FIFOs */ - emac.recvfifo.regbaseaddress = emac.baseaddress + - XEM_PFIFO_RXREG_OFFSET; - emac.recvfifo.databaseaddress = emac.baseaddress + - XEM_PFIFO_RXDATA_OFFSET; - out_be32 (emac.recvfifo.regbaseaddress, XPF_RESET_FIFO_MASK); - - emac.sendfifo.regbaseaddress = emac.baseaddress + - XEM_PFIFO_TXREG_OFFSET; - emac.sendfifo.databaseaddress = emac.baseaddress + - XEM_PFIFO_TXDATA_OFFSET; - out_be32 (emac.sendfifo.regbaseaddress, XPF_RESET_FIFO_MASK); - - /* Reset the entire IPIF */ - out_be32 (emac.baseaddress + XIIF_V123B_RESETR_OFFSET, - XIIF_V123B_RESET_MASK); - - /* Stopping EMAC for setting up MAC */ - helpreg = in_be32 (emac.baseaddress + XEM_ECR_OFFSET); - helpreg &= ~(XEM_ECR_XMIT_ENABLE_MASK | XEM_ECR_RECV_ENABLE_MASK); - out_be32 (emac.baseaddress + XEM_ECR_OFFSET, helpreg); - - if (!eth_getenv_enetaddr("ethaddr", enetaddr)) { - memcpy(enetaddr, emacaddr, ENET_ADDR_LENGTH); - eth_setenv_enetaddr("ethaddr", enetaddr); - } - - /* Set the device station address high and low registers */ - helpreg = (enetaddr[0] << 8) | enetaddr[1]; - out_be32 (emac.baseaddress + XEM_SAH_OFFSET, helpreg); - helpreg = (enetaddr[2] << 24) | (enetaddr[3] << 16) | - (enetaddr[4] << 8) | enetaddr[5]; - out_be32 (emac.baseaddress + XEM_SAL_OFFSET, helpreg); - - helpreg = XEM_ECR_UNICAST_ENABLE_MASK | XEM_ECR_BROAD_ENABLE_MASK | - XEM_ECR_FULL_DUPLEX_MASK | XEM_ECR_XMIT_FCS_ENABLE_MASK | - XEM_ECR_XMIT_PAD_ENABLE_MASK | XEM_ECR_PHY_ENABLE_MASK; - out_be32 (emac.baseaddress + XEM_ECR_OFFSET, helpreg); - - emac.isstarted = 1; - - /* Enable the transmitter, and receiver */ - helpreg = in_be32 (emac.baseaddress + XEM_ECR_OFFSET); - helpreg &= ~(XEM_ECR_XMIT_RESET_MASK | XEM_ECR_RECV_RESET_MASK); - helpreg |= (XEM_ECR_XMIT_ENABLE_MASK | XEM_ECR_RECV_ENABLE_MASK); - out_be32 (emac.baseaddress + XEM_ECR_OFFSET, helpreg); - - printf("EMAC Initialization complete\n\r"); - return 0; -} - -int eth_send(volatile void *ptr, int len) -{ - u32 intrstatus; - u32 xmitstatus; - u32 fifocount; - u32 wordcount; - u32 extrabytecount; - u32 *wordbuffer = (u32 *) ptr; - - if (len > ENET_MAX_MTU) - len = ENET_MAX_MTU; - - /* - * Check for overruns and underruns for the transmit status and length - * FIFOs and make sure the send packet FIFO is not deadlocked. - * Any of these conditions is bad enough that we do not want to - * continue. The upper layer software should reset the device to resolve - * the error. - */ - intrstatus = in_be32 ((emac.baseaddress) + XIIF_V123B_IISR_OFFSET); - if (intrstatus & (XEM_EIR_XMIT_SFIFO_OVER_MASK | - XEM_EIR_XMIT_LFIFO_OVER_MASK)) { - debug ("Transmitting overrun error\n"); - return 0; - } else if (intrstatus & (XEM_EIR_XMIT_SFIFO_UNDER_MASK | - XEM_EIR_XMIT_LFIFO_UNDER_MASK)) { - debug ("Transmitting underrun error\n"); - return 0; - } else if (in_be32 (emac.sendfifo.regbaseaddress + - XPF_COUNT_STATUS_REG_OFFSET) & XPF_DEADLOCK_MASK) { - debug ("Transmitting fifo error\n"); - return 0; - } - - /* - * Before writing to the data FIFO, make sure the length FIFO is not - * full. The data FIFO might not be full yet even though the length FIFO - * is. This avoids an overrun condition on the length FIFO and keeps the - * FIFOs in sync. - * - * Clear the latched LFIFO_FULL bit so next time around the most - * current status is represented - */ - if (intrstatus & XEM_EIR_XMIT_LFIFO_FULL_MASK) { - out_be32 ((emac.baseaddress) + XIIF_V123B_IISR_OFFSET, - intrstatus & XEM_EIR_XMIT_LFIFO_FULL_MASK); - debug ("Fifo is full\n"); - return 0; - } - - /* get the count of how many words may be inserted into the FIFO */ - fifocount = in_be32 (emac.sendfifo.regbaseaddress + - XPF_COUNT_STATUS_REG_OFFSET) & XPF_COUNT_MASK; - wordcount = len >> 2; - extrabytecount = len & 0x3; - - if (fifocount < wordcount) { - debug ("Sending packet is larger then size of FIFO\n"); - return 0; - } - - for (fifocount = 0; fifocount < wordcount; fifocount++) { - out_be32 (emac.sendfifo.databaseaddress, wordbuffer[fifocount]); - } - if (extrabytecount > 0) { - u32 lastword = 0; - u8 *extrabytesbuffer = (u8 *) (wordbuffer + wordcount); - - if (extrabytecount == 1) { - lastword = extrabytesbuffer[0] << 24; - } else if (extrabytecount == 2) { - lastword = extrabytesbuffer[0] << 24 | - extrabytesbuffer[1] << 16; - } else if (extrabytecount == 3) { - lastword = extrabytesbuffer[0] << 24 | - extrabytesbuffer[1] << 16 | - extrabytesbuffer[2] << 8; - } - out_be32 (emac.sendfifo.databaseaddress, lastword); - } - - /* Loop on the MAC's status to wait for any pause to complete */ - intrstatus = in_be32 ((emac.baseaddress) + XIIF_V123B_IISR_OFFSET); - while ((intrstatus & XEM_EIR_XMIT_PAUSE_MASK) != 0) { - intrstatus = in_be32 ((emac.baseaddress) + - XIIF_V123B_IISR_OFFSET); - /* Clear the pause status from the transmit status register */ - out_be32 ((emac.baseaddress) + XIIF_V123B_IISR_OFFSET, - intrstatus & XEM_EIR_XMIT_PAUSE_MASK); - } - - /* - * Set the MAC's transmit packet length register to tell it to transmit - */ - out_be32 (emac.baseaddress + XEM_TPLR_OFFSET, len); - - /* - * Loop on the MAC's status to wait for the transmit to complete. - * The transmit status is in the FIFO when the XMIT_DONE bit is set. - */ - do { - intrstatus = in_be32 ((emac.baseaddress) + - XIIF_V123B_IISR_OFFSET); - } - while ((intrstatus & XEM_EIR_XMIT_DONE_MASK) == 0); - - xmitstatus = in_be32 (emac.baseaddress + XEM_TSR_OFFSET); - - if (intrstatus & (XEM_EIR_XMIT_SFIFO_OVER_MASK | - XEM_EIR_XMIT_LFIFO_OVER_MASK)) { - debug ("Transmitting overrun error\n"); - return 0; - } else if (intrstatus & (XEM_EIR_XMIT_SFIFO_UNDER_MASK | - XEM_EIR_XMIT_LFIFO_UNDER_MASK)) { - debug ("Transmitting underrun error\n"); - return 0; - } - - /* Clear the interrupt status register of transmit statuses */ - out_be32 ((emac.baseaddress) + XIIF_V123B_IISR_OFFSET, - intrstatus & XEM_EIR_XMIT_ALL_MASK); - - /* - * Collision errors are stored in the transmit status register - * instead of the interrupt status register - */ - if ((xmitstatus & XEM_TSR_EXCESS_DEFERRAL_MASK) || - (xmitstatus & XEM_TSR_LATE_COLLISION_MASK)) { - debug ("Transmitting collision error\n"); - return 0; - } - return 1; -} - -int eth_rx(void) -{ - u32 pktlength; - u32 intrstatus; - u32 fifocount; - u32 wordcount; - u32 extrabytecount; - u32 lastword; - u8 *extrabytesbuffer; - - if (in_be32 (emac.recvfifo.regbaseaddress + XPF_COUNT_STATUS_REG_OFFSET) - & XPF_DEADLOCK_MASK) { - out_be32 (emac.recvfifo.regbaseaddress, XPF_RESET_FIFO_MASK); - debug ("Receiving FIFO deadlock\n"); - return 0; - } - - /* - * Get the interrupt status to know what happened (whether an error - * occurred and/or whether frames have been received successfully). - * When clearing the intr status register, clear only statuses that - * pertain to receive. - */ - intrstatus = in_be32 ((emac.baseaddress) + XIIF_V123B_IISR_OFFSET); - /* - * Before reading from the length FIFO, make sure the length FIFO is not - * empty. We could cause an underrun error if we try to read from an - * empty FIFO. - */ - if (!(intrstatus & XEM_EIR_RECV_DONE_MASK)) { - /* debug ("Receiving FIFO is empty\n"); */ - return 0; - } - - /* - * Determine, from the MAC, the length of the next packet available - * in the data FIFO (there should be a non-zero length here) - */ - pktlength = in_be32 (emac.baseaddress + XEM_RPLR_OFFSET); - if (!pktlength) { - return 0; - } - - /* - * Write the RECV_DONE bit in the status register to clear it. This bit - * indicates the RPLR is non-empty, and we know it's set at this point. - * We clear it so that subsequent entry into this routine will reflect - * the current status. This is done because the non-empty bit is latched - * in the IPIF, which means it may indicate a non-empty condition even - * though there is something in the FIFO. - */ - out_be32 ((emac.baseaddress) + XIIF_V123B_IISR_OFFSET, - XEM_EIR_RECV_DONE_MASK); - - fifocount = in_be32 (emac.recvfifo.regbaseaddress + - XPF_COUNT_STATUS_REG_OFFSET) & XPF_COUNT_MASK; - - if ((fifocount * 4) < pktlength) { - debug ("Receiving FIFO is smaller than packet size.\n"); - return 0; - } - - wordcount = pktlength >> 2; - extrabytecount = pktlength & 0x3; - - for (fifocount = 0; fifocount < wordcount; fifocount++) { - etherrxbuff[fifocount] = - in_be32 (emac.recvfifo.databaseaddress); - } - - /* - * if there are extra bytes to handle, read the last word from the FIFO - * and insert the extra bytes into the buffer - */ - if (extrabytecount > 0) { - extrabytesbuffer = (u8 *) (etherrxbuff + wordcount); - - lastword = in_be32 (emac.recvfifo.databaseaddress); - - /* - * one extra byte in the last word, put the byte into the next - * location of the buffer, bytes in a word of the FIFO are - * ordered from most significant byte to least - */ - if (extrabytecount == 1) { - extrabytesbuffer[0] = (u8) (lastword >> 24); - } else if (extrabytecount == 2) { - extrabytesbuffer[0] = (u8) (lastword >> 24); - extrabytesbuffer[1] = (u8) (lastword >> 16); - } else if (extrabytecount == 3) { - extrabytesbuffer[0] = (u8) (lastword >> 24); - extrabytesbuffer[1] = (u8) (lastword >> 16); - extrabytesbuffer[2] = (u8) (lastword >> 8); - } - } - NetReceive((uchar *)etherrxbuff, pktlength); - return 1; -} diff --git a/drivers/net/xilinx_emaclite.c b/drivers/net/xilinx_emaclite.c index cf3957380..0820daa2b 100644 --- a/drivers/net/xilinx_emaclite.c +++ b/drivers/net/xilinx_emaclite.c @@ -1,26 +1,27 @@ -/****************************************************************************** - * - * XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" - * AS A COURTESY TO YOU, SOLELY FOR USE IN DEVELOPING PROGRAMS AND - * SOLUTIONS FOR XILINX DEVICES. BY PROVIDING THIS DESIGN, CODE, - * OR INFORMATION AS ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, - * APPLICATION OR STANDARD, XILINX IS MAKING NO REPRESENTATION - * THAT THIS IMPLEMENTATION IS FREE FROM ANY CLAIMS OF INFRINGEMENT, - * AND YOU ARE RESPONSIBLE FOR OBTAINING ANY RIGHTS YOU MAY REQUIRE - * FOR YOUR IMPLEMENTATION. XILINX EXPRESSLY DISCLAIMS ANY - * WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE - * IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR - * REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF - * INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE. +/* + * (C) Copyright 2007-2009 Michal Simek + * (C) Copyright 2003 Xilinx Inc. * - * (C) Copyright 2007-2008 Michal Simek * Michal SIMEK <monstr@monstr.eu> * - * (c) Copyright 2003 Xilinx Inc. - * All rights reserved. + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. * - ******************************************************************************/ + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ #include <common.h> #include <net.h> diff --git a/examples/standalone/Makefile b/examples/standalone/Makefile index bc98120a5..5e2f2bcae 100644 --- a/examples/standalone/Makefile +++ b/examples/standalone/Makefile @@ -23,83 +23,40 @@ include $(TOPDIR)/config.mk -ELF = hello_world -SREC = hello_world.srec -BIN = hello_world.bin - -ELF += atmel_df_pow2 -SREC += atmel_df_pow2.srec -BIN += atmel_df_pow2.bin - -ifeq ($(CPU),mpc8xx) -ELF += test_burst -SREC += test_burst.srec -BIN += test_burst.bin -endif - -ifeq ($(ARCH),i386) -ELF += 82559_eeprom -SREC += 82559_eeprom.srec -BIN += 82559_eeprom.bin -endif - -ifeq ($(ARCH),ppc) -ELF += sched -SREC += sched.srec -BIN += sched.bin -endif - -ifeq ($(ARCH),blackfin) -BFIN_BIN = smc91111_eeprom smc911x_eeprom -ELF += $(BFIN_BIN) -SREC += $(addsuffix .srec,$(BFIN_BIN)) -BIN += $(addsuffix .bin,$(BFIN_BIN)) -endif - -# The following example is pretty 8xx specific... -ifeq ($(CPU),mpc8xx) -ELF += timer -SREC += timer.srec -BIN += timer.bin -endif - -# The following example is 8260 specific... -ifeq ($(CPU),mpc8260) -ELF += mem_to_mem_idma2intr -SREC += mem_to_mem_idma2intr.srec -BIN += mem_to_mem_idma2intr.bin -endif - -# Demo for 52xx IRQs -ifeq ($(CPU),mpc5xxx) -ELF += interrupt -SREC += interrupt.srec -BIN += interrupt.bin -endif - -# Utility for resetting i82559 EEPROM -ifeq ($(BOARD),oxc) -ELF += eepro100_eeprom -SREC += eepro100_eeprom.srec -BIN += eepro100_eeprom.bin -endif - - -COBJS := $(SREC:.srec=.o) +ELF-$(ARCH) := +ELF-$(BOARD) := +ELF-$(CPU) := +ELF-y := hello_world + +ELF-$(CONFIG_SMC91111) += smc91111_eeprom +ELF-$(CONFIG_SMC911X) += smc911x_eeprom +ELF-$(CONFIG_SPI_FLASH_ATMEL) += atmel_df_pow2 +ELF-i386 += 82559_eeprom +ELF-mpc5xxx += interrupt +ELF-mpc8xx += test_burst timer +ELF-mpc8260 += mem_to_mem_idma2intr +ELF-ppc += sched +ELF-oxc += eepro100_eeprom + +ELF := $(ELF-y) $(ELF-$(ARCH)) $(ELF-$(BOARD)) $(ELF-$(CPU)) +SREC = $(addsuffix .srec,$(ELF)) +BIN = $(addsuffix .bin,$(ELF)) + +COBJS := $(ELF:=.o) LIB = $(obj)libstubs.a -LIBAOBJS= -ifeq ($(ARCH),ppc) -LIBAOBJS+= $(ARCH)_longjmp.o $(ARCH)_setjmp.o -endif -ifeq ($(CPU),mpc8xx) -LIBAOBJS+= test_burst_lib.o -endif -LIBCOBJS= stubs.o + +LIBAOBJS-$(ARCH) := +LIBAOBJS-$(CPU) := +LIBAOBJS-ppc += $(ARCH)_longjmp.o $(ARCH)_setjmp.o +LIBAOBJS-mpc8xx += test_burst_lib.o +LIBAOBJS := $(LIBAOBJS-$(ARCH)) $(LIBAOBJS-$(CPU)) + +LIBCOBJS = stubs.o LIBOBJS = $(addprefix $(obj),$(LIBAOBJS) $(LIBCOBJS)) -SRCS := $(COBJS:.o=.c) $(LIBCOBJS:.o=.c) $(if $(LIBAOBJS),$(LIBAOBJS:.o=.S)) +SRCS := $(COBJS:.o=.c) $(LIBCOBJS:.o=.c) $(LIBAOBJS:.o=.S) OBJS := $(addprefix $(obj),$(COBJS)) ELF := $(addprefix $(obj),$(ELF)) BIN := $(addprefix $(obj),$(BIN)) diff --git a/fs/ubifs/ubifs.h b/fs/ubifs/ubifs.h index 43865aa66..06772af36 100644 --- a/fs/ubifs/ubifs.h +++ b/fs/ubifs/ubifs.h @@ -449,38 +449,6 @@ static inline ino_t parent_ino(struct dentry *dentry) return res; } -/* linux/include/linux/bitops.h */ - -#define BIT_MASK(nr) (1UL << ((nr) % BITS_PER_LONG)) -#define BIT_WORD(nr) ((nr) / BITS_PER_LONG) - -/* linux/include/asm-generic/bitops/non-atomic.h */ - -/** - * __set_bit - Set a bit in memory - * @nr: the bit to set - * @addr: the address to start counting from - * - * Unlike set_bit(), this function is non-atomic and may be reordered. - * If it's called on the same region of memory simultaneously, the effect - * may be that only one operation succeeds. - */ -static inline void __set_bit(int nr, volatile unsigned long *addr) -{ - unsigned long mask = BIT_MASK(nr); - unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr); - - *p |= mask; -} - -static inline void __clear_bit(int nr, volatile unsigned long *addr) -{ - unsigned long mask = BIT_MASK(nr); - unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr); - - *p &= ~mask; -} - /* debug.c */ #define DEFINE_SPINLOCK(...) diff --git a/include/asm-arm/bitops.h b/include/asm-arm/bitops.h index 4b8bab283..270f163ee 100644 --- a/include/asm-arm/bitops.h +++ b/include/asm-arm/bitops.h @@ -17,6 +17,8 @@ #ifdef __KERNEL__ +#include <asm/proc/system.h> + #define smp_mb__before_clear_bit() do { } while (0) #define smp_mb__after_clear_bit() do { } while (0) @@ -25,59 +27,72 @@ */ extern void set_bit(int nr, volatile void * addr); -static inline void __set_bit(int nr, volatile void *addr) -{ - ((unsigned char *) addr)[nr >> 3] |= (1U << (nr & 7)); -} - extern void clear_bit(int nr, volatile void * addr); -static inline void __clear_bit(int nr, volatile void *addr) -{ - ((unsigned char *) addr)[nr >> 3] &= ~(1U << (nr & 7)); -} - extern void change_bit(int nr, volatile void * addr); static inline void __change_bit(int nr, volatile void *addr) { - ((unsigned char *) addr)[nr >> 3] ^= (1U << (nr & 7)); -} + unsigned long mask = BIT_MASK(nr); + unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr); -extern int test_and_set_bit(int nr, volatile void * addr); + *p ^= mask; +} static inline int __test_and_set_bit(int nr, volatile void *addr) { - unsigned int mask = 1 << (nr & 7); - unsigned int oldval; + unsigned long mask = BIT_MASK(nr); + unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr); + unsigned long old = *p; - oldval = ((unsigned char *) addr)[nr >> 3]; - ((unsigned char *) addr)[nr >> 3] = oldval | mask; - return oldval & mask; + *p = old | mask; + return (old & mask) != 0; } -extern int test_and_clear_bit(int nr, volatile void * addr); +static inline int test_and_set_bit(int nr, volatile void * addr) +{ + unsigned long flags; + int out; + + local_irq_save(flags); + out = __test_and_set_bit(nr, addr); + local_irq_restore(flags); + + return out; +} static inline int __test_and_clear_bit(int nr, volatile void *addr) { - unsigned int mask = 1 << (nr & 7); - unsigned int oldval; + unsigned long mask = BIT_MASK(nr); + unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr); + unsigned long old = *p; - oldval = ((unsigned char *) addr)[nr >> 3]; - ((unsigned char *) addr)[nr >> 3] = oldval & ~mask; - return oldval & mask; + *p = old & ~mask; + return (old & mask) != 0; +} + +static inline int test_and_clear_bit(int nr, volatile void * addr) +{ + unsigned long flags; + int out; + + local_irq_save(flags); + out = __test_and_clear_bit(nr, addr); + local_irq_restore(flags); + + return out; } extern int test_and_change_bit(int nr, volatile void * addr); static inline int __test_and_change_bit(int nr, volatile void *addr) { - unsigned int mask = 1 << (nr & 7); - unsigned int oldval; + unsigned long mask = BIT_MASK(nr); + unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr); + unsigned long old = *p; - oldval = ((unsigned char *) addr)[nr >> 3]; - ((unsigned char *) addr)[nr >> 3] = oldval ^ mask; - return oldval & mask; + *p = old ^ mask; + return (old & mask) != 0; } extern int find_first_zero_bit(void * addr, unsigned size); @@ -110,14 +125,6 @@ static inline unsigned long ffz(unsigned long word) } /* - * ffs: find first bit set. This is defined the same way as - * the libc and compiler builtin ffs routines, therefore - * differs in spirit from the above ffz (man ffs). - */ - -#define ffs(x) generic_ffs(x) - -/* * hweightN: returns the hamming weight (i.e. the number * of bits set) of a N-bit word */ diff --git a/include/asm-blackfin/bitops.h b/include/asm-blackfin/bitops.h index 2e55b6a61..ab1fea55c 100644 --- a/include/asm-blackfin/bitops.h +++ b/include/asm-blackfin/bitops.h @@ -79,6 +79,7 @@ static __inline__ void __set_bit(int nr, volatile void *addr) mask = 1 << (nr & 0x1f); *a |= mask; } +#define PLATFORM__SET_BIT /* * clear_bit() doesn't provide any barrier for the compiler. @@ -269,14 +270,6 @@ static __inline__ int find_next_zero_bit(void *addr, int size, int offset) } /* - * ffs: find first bit set. This is defined the same way as - * the libc and compiler builtin ffs routines, therefore - * differs in spirit from the above ffz (man ffs). - */ - -#define ffs(x) generic_ffs(x) - -/* * hweightN: returns the hamming weight (i.e. the number * of bits set) of a N-bit word */ diff --git a/include/asm-i386/bitops.h b/include/asm-i386/bitops.h index b768e20fb..c7a38f237 100644 --- a/include/asm-i386/bitops.h +++ b/include/asm-i386/bitops.h @@ -349,6 +349,7 @@ static __inline__ int ffs(int x) "1:" : "=r" (r) : "g" (x)); return r+1; } +#define PLATFORM_FFS /** * hweightN - returns the hamming weight of a N-bit word diff --git a/include/asm-m68k/bitops.h b/include/asm-m68k/bitops.h index 0f9e8abe9..ad971b4f3 100644 --- a/include/asm-m68k/bitops.h +++ b/include/asm-m68k/bitops.h @@ -51,6 +51,7 @@ extern __inline__ int ffs(int x) return r; } #define __ffs(x) (ffs(x) - 1) +#define PLATFORM_FFS #endif /* __KERNEL__ */ diff --git a/include/asm-microblaze/bitops.h b/include/asm-microblaze/bitops.h index 04ea0207e..5d814f0eb 100644 --- a/include/asm-microblaze/bitops.h +++ b/include/asm-microblaze/bitops.h @@ -23,6 +23,7 @@ extern void __set_bit(int nr, volatile void * addr); extern void clear_bit(int nr, volatile void * addr); #define __clear_bit(nr, addr) clear_bit(nr, addr) +#define PLATFORM__CLEAR_BIT extern void change_bit(int nr, volatile void * addr); extern void __change_bit(int nr, volatile void * addr); @@ -75,6 +76,7 @@ extern __inline__ void __set_bit(int nr, volatile void * addr) mask = 1 << (nr & 0x1f); *a |= mask; } +#define PLATFORM__SET_BIT /* * clear_bit() doesn't provide any barrier for the compiler. diff --git a/include/asm-mips/bitops.h b/include/asm-mips/bitops.h index 659ac9d32..1c8f4c050 100644 --- a/include/asm-mips/bitops.h +++ b/include/asm-mips/bitops.h @@ -90,6 +90,7 @@ static __inline__ void __set_bit(int nr, volatile void * addr) *m |= 1UL << (nr & 31); } +#define PLATFORM__SET_BIT /* * clear_bit - Clears a bit in memory @@ -705,17 +706,6 @@ static __inline__ unsigned long ffz(unsigned long word) #ifdef __KERNEL__ -/** - * ffs - find first bit set - * @x: the word to search - * - * This is defined the same way as - * the libc and compiler builtin ffs routines, therefore - * differs in spirit from the above ffz (man ffs). - */ - -#define ffs(x) generic_ffs(x) - /* * hweightN - returns the hamming weight of a N-bit word * @x: the word to weigh diff --git a/include/asm-nios/bitops.h b/include/asm-nios/bitops.h index 7744212b4..0be74f42b 100644 --- a/include/asm-nios/bitops.h +++ b/include/asm-nios/bitops.h @@ -33,5 +33,6 @@ extern int test_and_set_bit(int nr, volatile void * a); extern int test_and_change_bit(int nr, volatile void * addr); extern int test_bit(int nr, volatile void * a); extern int ffs(int i); +#define PLATFORM_FFS #endif /* _ASM_NIOS_BITOPS_H */ diff --git a/include/asm-nios2/bitops.h b/include/asm-nios2/bitops.h index e6c1a850d..5776bda3e 100644 --- a/include/asm-nios2/bitops.h +++ b/include/asm-nios2/bitops.h @@ -33,5 +33,6 @@ extern int test_and_set_bit(int nr, volatile void * a); extern int test_and_change_bit(int nr, volatile void * addr); extern int test_bit(int nr, volatile void * a); extern int ffs(int i); +#define PLATFORM_FFS #endif /* __ASM_NIOS2_BITOPS_H */ diff --git a/include/asm-ppc/bitops.h b/include/asm-ppc/bitops.h index daa66cf91..adaf09149 100644 --- a/include/asm-ppc/bitops.h +++ b/include/asm-ppc/bitops.h @@ -178,6 +178,7 @@ static __inline__ int fls(unsigned int x) { return __ilog2(x) + 1; } +#define PLATFORM_FLS /** * fls64 - find last set bit in a 64-bit word @@ -230,6 +231,7 @@ extern __inline__ int ffs(int x) { return __ilog2(x & -x) + 1; } +#define PLATFORM_FFS /* * hweightN: returns the hamming weight (i.e. the number diff --git a/include/asm-ppc/mmu.h b/include/asm-ppc/mmu.h index eda2959b7..a019d0b39 100644 --- a/include/asm-ppc/mmu.h +++ b/include/asm-ppc/mmu.h @@ -450,6 +450,8 @@ extern void print_bats(void); (((epn) & MAS3_RPN) | (wimge)) #define FSL_BOOKE_MAS3(rpn, user, perms) \ (((rpn) & MAS3_RPN) | (user) | (perms)) +#define FSL_BOOKE_MAS7(rpn) \ + (((u64)(rpn)) >> 32) #define BOOKE_PAGESZ_1K 0 #define BOOKE_PAGESZ_4K 1 @@ -480,20 +482,21 @@ extern int find_tlb_idx(void *addr, u8 tlbsel); extern unsigned int setup_ddr_tlbs(unsigned int memsize_in_meg); +extern void write_tlb(u32 _mas0, u32 _mas1, u32 _mas2, u32 _mas3, u32 _mas7); + #define SET_TLB_ENTRY(_tlb, _epn, _rpn, _perms, _wimge, _ts, _esel, _sz, _iprot) \ - { .tlb = _tlb, .epn = _epn, .rpn = _rpn, .perms = _perms, \ - .wimge = _wimge, .ts = _ts, .esel = _esel, .tsize = _sz, .iprot = _iprot } + { .mas0 = FSL_BOOKE_MAS0(_tlb, _esel, 0), \ + .mas1 = FSL_BOOKE_MAS1(1, _iprot, 0, _ts, _sz), \ + .mas2 = FSL_BOOKE_MAS2(_epn, _wimge), \ + .mas3 = FSL_BOOKE_MAS3(_rpn, 0, _perms), \ + .mas7 = FSL_BOOKE_MAS7(_rpn), } struct fsl_e_tlb_entry { - u8 tlb; - u32 epn; - u64 rpn; - u8 perms; - u8 wimge; - u8 ts; - u8 esel; - u8 tsize; - u8 iprot; + u32 mas0; + u32 mas1; + u32 mas2; + u32 mas3; + u32 mas7; }; extern struct fsl_e_tlb_entry tlb_table[]; diff --git a/include/asm-ppc/processor.h b/include/asm-ppc/processor.h index 0a4c66c9d..3764a5a51 100644 --- a/include/asm-ppc/processor.h +++ b/include/asm-ppc/processor.h @@ -518,6 +518,7 @@ #define SPRN_MAS5 0x275 /* MMU Assist Register 5 */ #define SPRN_MAS6 0x276 /* MMU Assist Register 6 */ #define SPRN_MAS7 0x3B0 /* MMU Assist Register 7 */ +#define SPRN_MAS8 0x155 /* MMU Assist Register 8 */ #define SPRN_IVOR32 0x210 /* Interrupt Vector Offset Register 32 */ #define SPRN_IVOR33 0x211 /* Interrupt Vector Offset Register 33 */ @@ -720,6 +721,7 @@ #define MAS5 SPRN_MAS5 #define MAS6 SPRN_MAS6 #define MAS7 SPRN_MAS7 +#define MAS8 SPRN_MAS8 #if defined(CONFIG_4xx) || defined(CONFIG_44x) || defined(CONFIG_MPC85xx) #define DAR_DEAR DEAR diff --git a/include/asm-sh/bitops.h b/include/asm-sh/bitops.h index 410fba46e..c57d62847 100644 --- a/include/asm-sh/bitops.h +++ b/include/asm-sh/bitops.h @@ -146,6 +146,8 @@ static inline int ffs (int x) } return r; } +#define PLATFORM_FFS + #endif /* __KERNEL__ */ #endif /* __ASM_SH_BITOPS_H */ diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h index 4bf05d203..76b78942b 100644 --- a/include/configs/MPC8313ERDB.h +++ b/include/configs/MPC8313ERDB.h @@ -242,6 +242,7 @@ #define CONFIG_SYS_NAND_U_BOOT_START 0x00100100 #define CONFIG_SYS_NAND_U_BOOT_OFFS 16384 #define CONFIG_SYS_NAND_U_BOOT_RELOC 0x00010000 +#define CONFIG_SYS_NAND_U_BOOT_RELOC_SP (CONFIG_SYS_NAND_U_BOOT_RELOC + 0x10000) #define CONFIG_SYS_NAND_BR_PRELIM ( CONFIG_SYS_NAND_BASE \ | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ diff --git a/include/configs/P2020DS.h b/include/configs/P2020DS.h index 46af7b9b0..2a2b9acf5 100644 --- a/include/configs/P2020DS.h +++ b/include/configs/P2020DS.h @@ -618,6 +618,15 @@ extern unsigned long calculate_board_ddr_clk(unsigned long dummy); #define CONFIG_CMD_EXT2 #endif +/* + * USB + */ +#define CONFIG_CMD_USB +#define CONFIG_USB_STORAGE +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_FSL +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET + #undef CONFIG_WATCHDOG /* watchdog disabled */ /* diff --git a/include/configs/SIMPC8313.h b/include/configs/SIMPC8313.h index b847ce85d..866ff179e 100644 --- a/include/configs/SIMPC8313.h +++ b/include/configs/SIMPC8313.h @@ -136,6 +136,7 @@ #define CONFIG_SYS_NAND_U_BOOT_DST 0x00100000 #define CONFIG_SYS_NAND_U_BOOT_START 0x00100100 #define CONFIG_SYS_NAND_U_BOOT_RELOC 0x00010000 +#define CONFIG_SYS_NAND_U_BOOT_RELOC_SP (CONFIG_SYS_NAND_U_BOOT_RELOC + 0x10000) #define CONFIG_SYS_NAND_BR_PRELIM ( CONFIG_SYS_NAND_BASE \ | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ diff --git a/include/configs/W7OLMC.h b/include/configs/W7OLMC.h index 553845d6d..40e4735b6 100644 --- a/include/configs/W7OLMC.h +++ b/include/configs/W7OLMC.h @@ -207,9 +207,9 @@ #define CONFIG_SYS_EBC_PB5CR 0xFD21A000 /* bank 6 is unused */ -/* pb6ap = 0 */ +/* PB6AP = 0 */ #define CONFIG_SYS_EBC_PB6AP 0x00000000 -/* pb6cr = 0 */ +/* PB6CR = 0 */ #define CONFIG_SYS_EBC_PB6CR 0x00000000 /* bank 7 is LED register */ diff --git a/include/configs/W7OLMG.h b/include/configs/W7OLMG.h index 73d6d24b6..a62f1b4d5 100644 --- a/include/configs/W7OLMG.h +++ b/include/configs/W7OLMG.h @@ -214,9 +214,9 @@ #define CONFIG_SYS_EBC_PB5CR 0xFD87A000 /* bank 6 is unused */ -/* pb6ap = 0 */ +/* PB6AP = 0 */ #define CONFIG_SYS_EBC_PB6AP 0x00000000 -/* pb6cr = 0 */ +/* PB6CR = 0 */ #define CONFIG_SYS_EBC_PB6CR 0x00000000 /* bank 7 is LED register */ diff --git a/include/configs/acadia.h b/include/configs/acadia.h index b71010769..2fb48b641 100644 --- a/include/configs/acadia.h +++ b/include/configs/acadia.h @@ -225,7 +225,8 @@ */ #define CONFIG_EXTRA_ENV_SETTINGS \ CONFIG_AMCC_DEF_ENV \ - CONFIG_AMCC_DEF_ENV_PPC \ + CONFIG_AMCC_DEF_ENV_POWERPC \ + CONFIG_AMCC_DEF_ENV_PPC_OLD \ CONFIG_AMCC_DEF_ENV_NOR_UPD \ CONFIG_AMCC_DEF_ENV_NAND_UPD \ "kernel_addr=fff10000\0" \ diff --git a/include/configs/compactcenter.h b/include/configs/intip.h index f8a1bbb98..4f7bc7e28 100644 --- a/include/configs/compactcenter.h +++ b/include/configs/intip.h @@ -23,7 +23,7 @@ */ /* - * compactcenter.h - configuration for CompactCenter (460EX) + * intip.h - configuration for CompactCenter aka intip (460EX) and DevCon-Center */ #ifndef __CONFIG_H #define __CONFIG_H @@ -32,15 +32,15 @@ * High Level Configuration Options */ /* - * This config file is used for CompactCenter and DevCon-Center + * This config file is used for CompactCenter(codename intip) and DevCon-Center */ #define CONFIG_460EX 1 /* Specific PPC460EX */ #ifdef CONFIG_DEVCONCENTER #define CONFIG_HOSTNAME devconcenter #define CONFIG_IDENT_STRING " devconcenter 0.02" #else -#define CONFIG_HOSTNAME compactcenter -#define CONFIG_IDENT_STRING " compactcenter 0.02" +#define CONFIG_HOSTNAME intip +#define CONFIG_IDENT_STRING " intip 0.02" #endif #define CONFIG_440 1 #define CONFIG_4xx 1 /* ... PPC4xx family */ diff --git a/include/configs/mgcoge.h b/include/configs/mgcoge.h index ea14948c4..b955749d8 100644 --- a/include/configs/mgcoge.h +++ b/include/configs/mgcoge.h @@ -70,6 +70,7 @@ #define CONFIG_NET_MULTI 1 #define CONFIG_ETHER_INDEX 4 +#define CONFIG_HAS_ETH0 #define CONFIG_SYS_SCC_TOUT_LOOP 10000000 # define CONFIG_SYS_CMXSCR_VALUE (CMXSCR_RS4CS_CLK7 | CMXSCR_TS4CS_CLK8) diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h index 72715f6ed..b486c7753 100644 --- a/include/configs/microblaze-generic.h +++ b/include/configs/microblaze-generic.h @@ -58,10 +58,7 @@ /*#define CONFIG_SYS_RESET_ADDRESS TEXT_BASE*/ /* ethernet */ -#ifdef XILINX_EMAC_BASEADDR - #define CONFIG_XILINX_EMAC 1 - #define CONFIG_SYS_ENET -#elif XILINX_EMACLITE_BASEADDR +#ifdef XILINX_EMACLITE_BASEADDR #define CONFIG_XILINX_EMACLITE 1 #define CONFIG_SYS_ENET #elif XILINX_LLTEMAC_BASEADDR @@ -136,13 +133,13 @@ #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x1000) /* global pointer */ -#define CONFIG_SYS_GBL_DATA_SIZE 0x1000 /* size of global data */ +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size of global data */ /* start of global data */ #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_SDRAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) /* monitor code */ #define SIZE 0x40000 -#define CONFIG_SYS_MONITOR_LEN SIZE +#define CONFIG_SYS_MONITOR_LEN (SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_GBL_DATA_OFFSET - CONFIG_SYS_MONITOR_LEN) #define CONFIG_SYS_MONITOR_END (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) #define CONFIG_SYS_MALLOC_LEN SIZE @@ -291,7 +288,7 @@ #define CONFIG_SYS_USR_EXCEP /* user exception */ #define CONFIG_SYS_HZ 1000 -#define CONFIG_PREBOOT "echo U-BOOT for $(hostname);setenv preboot;echo" +#define CONFIG_PREBOOT "echo U-BOOT for ${hostname};setenv preboot;echo" #define CONFIG_EXTRA_ENV_SETTINGS "unlock=yes\0" /* hardware flash protection */\ "nor0=ml401-0\0"\ @@ -301,4 +298,10 @@ #define CONFIG_CMDLINE_EDITING +/* Use the HUSH parser */ +#define CONFIG_SYS_HUSH_PARSER +#ifdef CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#endif + #endif /* __CONFIG_H */ diff --git a/include/configs/muas3001.h b/include/configs/muas3001.h index f031a17b2..ae033b2da 100644 --- a/include/configs/muas3001.h +++ b/include/configs/muas3001.h @@ -74,6 +74,7 @@ #define CONFIG_ETHER_INDEX 1 #define CONFIG_ETHER_ON_FCC1 +#define CONFIG_HAS_ETH0 #define FCC_ENET /* diff --git a/include/configs/suzaku.h b/include/configs/suzaku.h deleted file mode 100644 index 353e8db42..000000000 --- a/include/configs/suzaku.h +++ /dev/null @@ -1,110 +0,0 @@ -/* - * (C) Copyright 2004 Atmark Techno, Inc. - * - * Yasushi SHOJI <yashi@atmark-techno.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MICROBLAZE 1 /* This is an MicroBlaze CPU */ -#define CONFIG_SUZAKU 1 /* on an SUZAKU Board */ - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x80000000 -#define CONFIG_SYS_SDRAM_SIZE 0x01000000 -#define CONFIG_SYS_FLASH_BASE 0xfff00000 -#define CONFIG_SYS_FLASH_SIZE 0x00400000 -#define CONFIG_SYS_RESET_ADDRESS 0xfff00100 -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_SDRAM_SIZE - (1024 * 1024)) -#define CONFIG_SYS_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc */ -#define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MONITOR_BASE - (1024 * 1024)) - -#define CONFIG_XILINX_UARTLITE -#define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE { 115200 } - -/* System Register (GPIO) */ -#define MICROBLAZE_SYSREG_BASE_ADDR 0xFFFFA000 -#define MICROBLAZE_SYSREG_RECONFIGURE (1 << 0) - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#undef CONFIG_CMD_BDI -#undef CONFIG_CMD_SAVEENV -#undef CONFIG_CMD_MEMORY -#undef CONFIG_CMD_NET -#undef CONFIG_CMD_MISC - -#define CONFIG_SYS_UART1_BASE (0xFFFF2000) -#define CONFIG_SERIAL_BASE CONFIG_SYS_UART1_BASE - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "SUZAKU> " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ - -#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE /* default load address */ - -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 1 /* max number of sectors on one chip */ - -/*----------------------------------------------------------------------- - * NVRAM organization - */ -#define CONFIG_ENV_IS_NOWHERE 1 -#define CONFIG_ENV_SIZE 0x10000 /* Total Size of Environment Sector */ -#define CONFIG_ENV_SECT_SIZE 0x10000 /* see README - env sector total size */ - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ - -#define CONFIG_SYS_INIT_RAM_ADDR 0x80000000 /* inside of SDRAM */ -#define CONFIG_SYS_INIT_RAM_END 0x2000 /* End of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define XILINX_CLOCK_FREQ 50000000 -#define CONFIG_XILINX_CLOCK_FREQ XILINX_CLOCK_FREQ - -#endif /* __CONFIG_H */ diff --git a/include/linux/bitops.h b/include/linux/bitops.h index 7d41ae62c..e72431029 100644 --- a/include/linux/bitops.h +++ b/include/linux/bitops.h @@ -1,6 +1,7 @@ #ifndef _LINUX_BITOPS_H #define _LINUX_BITOPS_H +#include <asm/types.h> /* * ffs: find first bit set. This is defined the same way as @@ -37,6 +38,43 @@ static inline int generic_ffs(int x) return r; } +/** + * fls - find last (most-significant) bit set + * @x: the word to search + * + * This is defined the same way as ffs. + * Note fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32. + */ +static inline int generic_fls(int x) +{ + int r = 32; + + if (!x) + return 0; + if (!(x & 0xffff0000u)) { + x <<= 16; + r -= 16; + } + if (!(x & 0xff000000u)) { + x <<= 8; + r -= 8; + } + if (!(x & 0xf0000000u)) { + x <<= 4; + r -= 4; + } + if (!(x & 0xc0000000u)) { + x <<= 2; + r -= 2; + } + if (!(x & 0x80000000u)) { + x <<= 1; + r -= 1; + } + return r; +} + + /* * hweightN: returns the hamming weight (i.e. the number * of bits set) of a N-bit word @@ -66,7 +104,52 @@ static inline unsigned int generic_hweight8(unsigned int w) return (res & 0x0F) + ((res >> 4) & 0x0F); } +#define BIT_MASK(nr) (1UL << ((nr) % BITS_PER_LONG)) +#define BIT_WORD(nr) ((nr) / BITS_PER_LONG) + #include <asm/bitops.h> +/* linux/include/asm-generic/bitops/non-atomic.h */ + +#ifndef PLATFORM__SET_BIT +# define __set_bit generic_set_bit +#endif + +#ifndef PLATFORM__CLEAR_BIT +# define __clear_bit generic_clear_bit +#endif + +#ifndef PLATFORM_FFS +# define ffs generic_ffs +#endif + +#ifndef PLATFORM_FLS +# define fls generic_fls +#endif + +/** + * __set_bit - Set a bit in memory + * @nr: the bit to set + * @addr: the address to start counting from + * + * Unlike set_bit(), this function is non-atomic and may be reordered. + * If it's called on the same region of memory simultaneously, the effect + * may be that only one operation succeeds. + */ +static inline void generic_set_bit(int nr, volatile unsigned long *addr) +{ + unsigned long mask = BIT_MASK(nr); + unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr); + + *p |= mask; +} + +static inline void generic_clear_bit(int nr, volatile unsigned long *addr) +{ + unsigned long mask = BIT_MASK(nr); + unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr); + + *p &= ~mask; +} #endif diff --git a/include/ppc405.h b/include/ppc405.h index 55649e474..5e5689781 100644 --- a/include/ppc405.h +++ b/include/ppc405.h @@ -42,54 +42,39 @@ * DMA ******************************************************************************/ #define DMA_DCR_BASE 0x100 -#define dmacr0 (DMA_DCR_BASE+0x00) /* DMA channel control register 0 */ -#define dmact0 (DMA_DCR_BASE+0x01) /* DMA count register 0 */ -#define dmada0 (DMA_DCR_BASE+0x02) /* DMA destination address register 0 */ -#define dmasa0 (DMA_DCR_BASE+0x03) /* DMA source address register 0 */ -#define dmasb0 (DMA_DCR_BASE+0x04) /* DMA scatter/gather descriptor addr 0 */ -#define dmacr1 (DMA_DCR_BASE+0x08) /* DMA channel control register 1 */ -#define dmact1 (DMA_DCR_BASE+0x09) /* DMA count register 1 */ -#define dmada1 (DMA_DCR_BASE+0x0a) /* DMA destination address register 1 */ -#define dmasa1 (DMA_DCR_BASE+0x0b) /* DMA source address register 1 */ -#define dmasb1 (DMA_DCR_BASE+0x0c) /* DMA scatter/gather descriptor addr 1 */ -#define dmacr2 (DMA_DCR_BASE+0x10) /* DMA channel control register 2 */ -#define dmact2 (DMA_DCR_BASE+0x11) /* DMA count register 2 */ -#define dmada2 (DMA_DCR_BASE+0x12) /* DMA destination address register 2 */ -#define dmasa2 (DMA_DCR_BASE+0x13) /* DMA source address register 2 */ -#define dmasb2 (DMA_DCR_BASE+0x14) /* DMA scatter/gather descriptor addr 2 */ -#define dmacr3 (DMA_DCR_BASE+0x18) /* DMA channel control register 3 */ -#define dmact3 (DMA_DCR_BASE+0x19) /* DMA count register 3 */ -#define dmada3 (DMA_DCR_BASE+0x1a) /* DMA destination address register 3 */ -#define dmasa3 (DMA_DCR_BASE+0x1b) /* DMA source address register 3 */ -#define dmasb3 (DMA_DCR_BASE+0x1c) /* DMA scatter/gather descriptor addr 3 */ -#define dmasr (DMA_DCR_BASE+0x20) /* DMA status register */ -#define dmasgc (DMA_DCR_BASE+0x23) /* DMA scatter/gather command register */ -#define dmaadr (DMA_DCR_BASE+0x24) /* DMA address decode register */ +#define DMACR0 (DMA_DCR_BASE+0x00) /* DMA channel control register 0 */ +#define DMACT0 (DMA_DCR_BASE+0x01) /* DMA count register 0 */ +#define DMADA0 (DMA_DCR_BASE+0x02) /* DMA destination address register 0 */ +#define DMASA0 (DMA_DCR_BASE+0x03) /* DMA source address register 0 */ +#define DMASB0 (DMA_DCR_BASE+0x04) /* DMA scatter/gather descriptor addr 0 */ +#define DMACR1 (DMA_DCR_BASE+0x08) /* DMA channel control register 1 */ +#define DMACT1 (DMA_DCR_BASE+0x09) /* DMA count register 1 */ +#define DMADA1 (DMA_DCR_BASE+0x0a) /* DMA destination address register 1 */ +#define DMASA1 (DMA_DCR_BASE+0x0b) /* DMA source address register 1 */ +#define DMASB1 (DMA_DCR_BASE+0x0c) /* DMA scatter/gather descriptor addr 1 */ +#define DMACR2 (DMA_DCR_BASE+0x10) /* DMA channel control register 2 */ +#define DMACT2 (DMA_DCR_BASE+0x11) /* DMA count register 2 */ +#define DMADA2 (DMA_DCR_BASE+0x12) /* DMA destination address register 2 */ +#define DMASA2 (DMA_DCR_BASE+0x13) /* DMA source address register 2 */ +#define DMASB2 (DMA_DCR_BASE+0x14) /* DMA scatter/gather descriptor addr 2 */ +#define DMACR3 (DMA_DCR_BASE+0x18) /* DMA channel control register 3 */ +#define DMACT3 (DMA_DCR_BASE+0x19) /* DMA count register 3 */ +#define DMADA3 (DMA_DCR_BASE+0x1a) /* DMA destination address register 3 */ +#define DMASA3 (DMA_DCR_BASE+0x1b) /* DMA source address register 3 */ +#define DMASB3 (DMA_DCR_BASE+0x1c) /* DMA scatter/gather descriptor addr 3 */ +#define DMASR (DMA_DCR_BASE+0x20) /* DMA status register */ +#define DMASGC (DMA_DCR_BASE+0x23) /* DMA scatter/gather command register */ +#define DMAADR (DMA_DCR_BASE+0x24) /* DMA address decode register */ #ifndef CONFIG_405EP /****************************************************************************** * Decompression Controller ******************************************************************************/ #define DECOMP_DCR_BASE 0x14 -#define kiar (DECOMP_DCR_BASE+0x0) /* Decompression controller addr reg */ -#define kidr (DECOMP_DCR_BASE+0x1) /* Decompression controller data reg */ - /* values for kiar register - indirect addressing of these regs */ - #define kitor0 0x00 /* index table origin register 0 */ - #define kitor1 0x01 /* index table origin register 1 */ - #define kitor2 0x02 /* index table origin register 2 */ - #define kitor3 0x03 /* index table origin register 3 */ - #define kaddr0 0x04 /* address decode definition regsiter 0 */ - #define kaddr1 0x05 /* address decode definition regsiter 1 */ - #define kconf 0x40 /* decompression core config register */ - #define kid 0x41 /* decompression core ID register */ - #define kver 0x42 /* decompression core version # reg */ - #define kpear 0x50 /* bus error addr reg (PLB addr) */ - #define kbear 0x51 /* bus error addr reg (DCP to EBIU addr)*/ - #define kesr0 0x52 /* bus error status reg 0 (R/clear) */ - #define kesr0s 0x53 /* bus error status reg 0 (set) */ - /* There are 0x400 of the following registers, from krom0 to krom3ff*/ - /* Only the first one is given here. */ - #define krom0 0x400 /* SRAM/ROM read/write */ +#define KIAR (DECOMP_DCR_BASE+0x0) /* Decompression controller addr reg */ +#define KIDR (DECOMP_DCR_BASE+0x1) /* Decompression controller data reg */ +/* values for kiar register - indirect addressing of these regs */ +#define KCONF 0x40 /* decompression core config register */ #endif /****************************************************************************** @@ -100,38 +85,37 @@ #else #define POWERMAN_DCR_BASE 0xb8 #endif -#define cpmsr (POWERMAN_DCR_BASE+0x0) /* Power management status */ -#define cpmer (POWERMAN_DCR_BASE+0x1) /* Power management enable */ -#define cpmfr (POWERMAN_DCR_BASE+0x2) /* Power management force */ +#define CPMSR (POWERMAN_DCR_BASE+0x0) /* Power management status */ +#define CPMER (POWERMAN_DCR_BASE+0x1) /* Power management enable */ +#define CPMFR (POWERMAN_DCR_BASE+0x2) /* Power management force */ /****************************************************************************** * Extrnal Bus Controller ******************************************************************************/ - /* values for ebccfga register - indirect addressing of these regs */ - #define pb0cr 0x00 /* periph bank 0 config reg */ - #define pb1cr 0x01 /* periph bank 1 config reg */ - #define pb2cr 0x02 /* periph bank 2 config reg */ - #define pb3cr 0x03 /* periph bank 3 config reg */ - #define pb4cr 0x04 /* periph bank 4 config reg */ + /* values for EBC0_CFGADDR register - indirect addressing of these regs */ + #define PB0CR 0x00 /* periph bank 0 config reg */ + #define PB1CR 0x01 /* periph bank 1 config reg */ + #define PB2CR 0x02 /* periph bank 2 config reg */ + #define PB3CR 0x03 /* periph bank 3 config reg */ + #define PB4CR 0x04 /* periph bank 4 config reg */ #ifndef CONFIG_405EP - #define pb5cr 0x05 /* periph bank 5 config reg */ - #define pb6cr 0x06 /* periph bank 6 config reg */ - #define pb7cr 0x07 /* periph bank 7 config reg */ + #define PB5CR 0x05 /* periph bank 5 config reg */ + #define PB6CR 0x06 /* periph bank 6 config reg */ + #define PB7CR 0x07 /* periph bank 7 config reg */ #endif - #define pb0ap 0x10 /* periph bank 0 access parameters */ - #define pb1ap 0x11 /* periph bank 1 access parameters */ - #define pb2ap 0x12 /* periph bank 2 access parameters */ - #define pb3ap 0x13 /* periph bank 3 access parameters */ - #define pb4ap 0x14 /* periph bank 4 access parameters */ + #define PB0AP 0x10 /* periph bank 0 access parameters */ + #define PB1AP 0x11 /* periph bank 1 access parameters */ + #define PB2AP 0x12 /* periph bank 2 access parameters */ + #define PB3AP 0x13 /* periph bank 3 access parameters */ + #define PB4AP 0x14 /* periph bank 4 access parameters */ #ifndef CONFIG_405EP - #define pb5ap 0x15 /* periph bank 5 access parameters */ - #define pb6ap 0x16 /* periph bank 6 access parameters */ - #define pb7ap 0x17 /* periph bank 7 access parameters */ + #define PB5AP 0x15 /* periph bank 5 access parameters */ + #define PB6AP 0x16 /* periph bank 6 access parameters */ + #define PB7AP 0x17 /* periph bank 7 access parameters */ #endif - #define pbear 0x20 /* periph bus error addr reg */ - #define pbesr0 0x21 /* periph bus error status reg 0 */ - #define pbesr1 0x22 /* periph bus error status reg 1 */ - #define epcr 0x23 /* external periph control reg */ + #define PBEAR 0x20 /* periph bus error addr reg */ + #define PBESR0 0x21 /* periph bus error status reg 0 */ + #define PBESR1 0x22 /* periph bus error status reg 1 */ #define EBC0_CFG 0x23 /* external bus configuration reg */ #ifdef CONFIG_405EP @@ -139,12 +123,12 @@ * Control ******************************************************************************/ #define CNTRL_DCR_BASE 0x0f0 -#define cpc0_pllmr0 (CNTRL_DCR_BASE+0x0) /* PLL mode register 0 */ -#define cpc0_boot (CNTRL_DCR_BASE+0x1) /* Clock status register */ -#define cpc0_epctl (CNTRL_DCR_BASE+0x3) /* EMAC to PHY control register */ -#define cpc0_pllmr1 (CNTRL_DCR_BASE+0x4) /* PLL mode register 1 */ -#define cpc0_ucr (CNTRL_DCR_BASE+0x5) /* UART control register */ -#define cpc0_pci (CNTRL_DCR_BASE+0x9) /* PCI control register */ +#define CPC0_PLLMR0 (CNTRL_DCR_BASE+0x0) /* PLL mode register 0 */ +#define CPC0_BOOT (CNTRL_DCR_BASE+0x1) /* Clock status register */ +#define CPC0_EPCTL (CNTRL_DCR_BASE+0x3) /* EMAC to PHY control register */ +#define CPC0_PLLMR1 (CNTRL_DCR_BASE+0x4) /* PLL mode register 1 */ +#define CPC0_UCR (CNTRL_DCR_BASE+0x5) /* UART control register */ +#define CPC0_PCI (CNTRL_DCR_BASE+0x9) /* PCI control register */ #define CPC0_PLLMR0 (CNTRL_DCR_BASE+0x0) /* PLL mode 0 register */ #define CPC0_BOOT (CNTRL_DCR_BASE+0x1) /* Chip Clock Status register */ @@ -401,10 +385,10 @@ #define VCO_MIN 500 #define VCO_MAX 1000 #elif defined(CONFIG_405EZ) -#define sdrnand0 0x4000 -#define sdrultra0 0x4040 -#define sdrultra1 0x4050 -#define sdricintstat 0x4510 +#define SDR0_NAND0 0x4000 +#define SDR0_ULTRA0 0x4040 +#define SDR0_ULTRA1 0x4050 +#define SDR0_ICINTSTAT 0x4510 #define SDR_NAND0_NDEN 0x80000000 #define SDR_NAND0_NDBTEN 0x40000000 @@ -429,21 +413,19 @@ #define SDR_ICTX0_STAT 0x40000000 #define SDR_ICTX1_STAT 0x20000000 -#define SDR_PINSTP 0x40 +#define SDR0_PINSTP 0x40 /****************************************************************************** * Control ******************************************************************************/ /* CPR Registers */ -#define cprclkupd 0x020 /* CPR_CLKUPD */ -#define cprpllc 0x040 /* CPR_PLLC */ -#define cprplld 0x060 /* CPR_PLLD */ -#define cprprimad 0x080 /* CPR_PRIMAD */ -#define cprperd0 0x0e0 /* CPR_PERD0 */ -#define cprperd1 0x0e1 /* CPR_PERD1 */ -#define cprperc0 0x180 /* CPR_PERC0 */ -#define cprmisc0 0x181 /* CPR_MISC0 */ -#define cprmisc1 0x182 /* CPR_MISC1 */ +#define CPR0_CLKUP 0x020 /* CPR_CLKUPD */ +#define CPR0_PLLC 0x040 /* CPR_PLLC */ +#define CPR0_PLLD 0x060 /* CPR_PLLD */ +#define CPC0_PRIMAD 0x080 /* CPR_PRIMAD */ +#define CPC0_PERD0 0x0e0 /* CPR_PERD0 */ +#define CPC0_PERD1 0x0e1 /* CPR_PERD1 */ +#define CPC0_PERC0 0x180 /* CPR_PERC0 */ #define CPR_CLKUPD_ENPLLCH_EN 0x40000000 /* Enable CPR PLL Changes */ #define CPR_CLKUPD_ENDVCH_EN 0x20000000 /* Enable CPR Sys. Div. Changes */ @@ -470,21 +452,14 @@ * Control ******************************************************************************/ #define CNTRL_DCR_BASE 0x0b0 -#define pllmd (CNTRL_DCR_BASE+0x0) /* PLL mode register */ -#define cntrl0 (CNTRL_DCR_BASE+0x1) /* Control 0 register */ -#define cntrl1 (CNTRL_DCR_BASE+0x2) /* Control 1 register */ -#define reset (CNTRL_DCR_BASE+0x3) /* reset register */ -#define strap (CNTRL_DCR_BASE+0x4) /* strap register */ - -#define CPC0_CR0 (CNTRL_DCR_BASE+0x1) /* chip control register 0 */ -#define CPC0_CR1 (CNTRL_DCR_BASE+0x2) /* chip control register 1 */ -#define CPC0_PSR (CNTRL_DCR_BASE+0x4) /* chip pin strapping register */ +#define CPC0_PLLMR (CNTRL_DCR_BASE + 0x0) /* PLL mode register */ +#define CPC0_CR0 (CNTRL_DCR_BASE + 0x1) /* chip control register 0 */ +#define CPC0_CR1 (CNTRL_DCR_BASE + 0x2) /* chip control register 1 */ +#define CPC0_PSR (CNTRL_DCR_BASE + 0x4) /* chip pin strapping reg */ /* CPC0_ECR/CPC0_EIRR: PPC405GPr only */ -#define CPC0_EIRR (CNTRL_DCR_BASE+0x6) /* external interrupt routing register */ -#define CPC0_ECR (0xaa) /* edge conditioner register */ - -#define ecr (0xaa) /* edge conditioner register (405gpr) */ +#define CPC0_EIRR (CNTRL_DCR_BASE + 0x6) /* ext interrupt routing reg */ +#define CPC0_ECR 0xaa /* edge conditioner register */ /* Bit definitions */ #define PLLMR_FWD_DIV_MASK 0xE0000000 /* Forward Divisor */ @@ -557,140 +532,38 @@ ******************************************************************************/ #if defined(CONFIG_405EZ) #define MAL_DCR_BASE 0x380 -#define malmcr (MAL_DCR_BASE+0x00) /* MAL Config reg */ -#define malesr (MAL_DCR_BASE+0x01) /* Err Status reg (Read/Clear)*/ -#define malier (MAL_DCR_BASE+0x02) /* Interrupt enable reg */ -#define maldbr (MAL_DCR_BASE+0x03) /* Mal Debug reg (Read only) */ -#define maltxcasr (MAL_DCR_BASE+0x04) /* TX Channel active reg (set)*/ -#define maltxcarr (MAL_DCR_BASE+0x05) /* TX Channel active reg (Reset) */ -#define maltxeobisr (MAL_DCR_BASE+0x06) /* TX End of buffer int status reg */ -#define maltxdeir (MAL_DCR_BASE+0x07) /* TX Descr. Error Int reg */ -/* 0x08-0x0F Reserved */ -#define malrxcasr (MAL_DCR_BASE+0x10) /* RX Channel active reg (set)*/ -#define malrxcarr (MAL_DCR_BASE+0x11) /* RX Channel active reg (Reset) */ -#define malrxeobisr (MAL_DCR_BASE+0x12) /* RX End of buffer int status reg */ -#define malrxdeir (MAL_DCR_BASE+0x13) /* RX Descr. Error Int reg */ -/* 0x14-0x1F Reserved */ -#define maltxctp0r (MAL_DCR_BASE+0x20) /* TX 0 Channel table ptr reg */ -#define maltxctp1r (MAL_DCR_BASE+0x21) /* TX 1 Channel table ptr reg */ -#define maltxctp2r (MAL_DCR_BASE+0x22) /* TX 2 Channel table ptr reg */ -#define maltxctp3r (MAL_DCR_BASE+0x23) /* TX 3 Channel table ptr reg */ -#define maltxctp4r (MAL_DCR_BASE+0x24) /* TX 4 Channel table ptr reg */ -#define maltxctp5r (MAL_DCR_BASE+0x25) /* TX 5 Channel table ptr reg */ -#define maltxctp6r (MAL_DCR_BASE+0x26) /* TX 6 Channel table ptr reg */ -#define maltxctp7r (MAL_DCR_BASE+0x27) /* TX 7 Channel table ptr reg */ -#define maltxctp8r (MAL_DCR_BASE+0x28) /* TX 8 Channel table ptr reg */ -#define maltxctp9r (MAL_DCR_BASE+0x29) /* TX 9 Channel table ptr reg */ -#define maltxctp10r (MAL_DCR_BASE+0x2A) /* TX 10 Channel table ptr reg */ -#define maltxctp11r (MAL_DCR_BASE+0x2B) /* TX 11 Channel table ptr reg */ -#define maltxctp12r (MAL_DCR_BASE+0x2C) /* TX 12 Channel table ptr reg */ -#define maltxctp13r (MAL_DCR_BASE+0x2D) /* TX 13 Channel table ptr reg */ -#define maltxctp14r (MAL_DCR_BASE+0x2E) /* TX 14 Channel table ptr reg */ -#define maltxctp15r (MAL_DCR_BASE+0x2F) /* TX 15 Channel table ptr reg */ -#define maltxctp16r (MAL_DCR_BASE+0x30) /* TX 16 Channel table ptr reg */ -#define maltxctp17r (MAL_DCR_BASE+0x31) /* TX 17 Channel table ptr reg */ -#define maltxctp18r (MAL_DCR_BASE+0x32) /* TX 18 Channel table ptr reg */ -#define maltxctp19r (MAL_DCR_BASE+0x33) /* TX 19 Channel table ptr reg */ -#define maltxctp20r (MAL_DCR_BASE+0x34) /* TX 20 Channel table ptr reg */ -#define maltxctp21r (MAL_DCR_BASE+0x35) /* TX 21 Channel table ptr reg */ -#define maltxctp22r (MAL_DCR_BASE+0x36) /* TX 22 Channel table ptr reg */ -#define maltxctp23r (MAL_DCR_BASE+0x37) /* TX 23 Channel table ptr reg */ -#define maltxctp24r (MAL_DCR_BASE+0x38) /* TX 24 Channel table ptr reg */ -#define maltxctp25r (MAL_DCR_BASE+0x39) /* TX 25 Channel table ptr reg */ -#define maltxctp26r (MAL_DCR_BASE+0x3A) /* TX 26 Channel table ptr reg */ -#define maltxctp27r (MAL_DCR_BASE+0x3B) /* TX 27 Channel table ptr reg */ -#define maltxctp28r (MAL_DCR_BASE+0x3C) /* TX 28 Channel table ptr reg */ -#define maltxctp29r (MAL_DCR_BASE+0x3D) /* TX 29 Channel table ptr reg */ -#define maltxctp30r (MAL_DCR_BASE+0x3E) /* TX 30 Channel table ptr reg */ -#define maltxctp31r (MAL_DCR_BASE+0x3F) /* TX 31 Channel table ptr reg */ -#define malrxctp0r (MAL_DCR_BASE+0x40) /* RX 0 Channel table ptr reg */ -#define malrxctp1r (MAL_DCR_BASE+0x41) /* RX 1 Channel table ptr reg */ -#define malrxctp2r (MAL_DCR_BASE+0x42) /* RX 2 Channel table ptr reg */ -#define malrxctp3r (MAL_DCR_BASE+0x43) /* RX 3 Channel table ptr reg */ -#define malrxctp4r (MAL_DCR_BASE+0x44) /* RX 4 Channel table ptr reg */ -#define malrxctp5r (MAL_DCR_BASE+0x45) /* RX 5 Channel table ptr reg */ -#define malrxctp6r (MAL_DCR_BASE+0x46) /* RX 6 Channel table ptr reg */ -#define malrxctp7r (MAL_DCR_BASE+0x47) /* RX 7 Channel table ptr reg */ -#define malrxctp8r (MAL_DCR_BASE+0x48) /* RX 8 Channel table ptr reg */ -#define malrxctp9r (MAL_DCR_BASE+0x49) /* RX 9 Channel table ptr reg */ -#define malrxctp10r (MAL_DCR_BASE+0x4A) /* RX 10 Channel table ptr reg */ -#define malrxctp11r (MAL_DCR_BASE+0x4B) /* RX 11 Channel table ptr reg */ -#define malrxctp12r (MAL_DCR_BASE+0x4C) /* RX 12 Channel table ptr reg */ -#define malrxctp13r (MAL_DCR_BASE+0x4D) /* RX 13 Channel table ptr reg */ -#define malrxctp14r (MAL_DCR_BASE+0x4E) /* RX 14 Channel table ptr reg */ -#define malrxctp15r (MAL_DCR_BASE+0x4F) /* RX 15 Channel table ptr reg */ -#define malrxctp16r (MAL_DCR_BASE+0x50) /* RX 16 Channel table ptr reg */ -#define malrxctp17r (MAL_DCR_BASE+0x51) /* RX 17 Channel table ptr reg */ -#define malrxctp18r (MAL_DCR_BASE+0x52) /* RX 18 Channel table ptr reg */ -#define malrxctp19r (MAL_DCR_BASE+0x53) /* RX 19 Channel table ptr reg */ -#define malrxctp20r (MAL_DCR_BASE+0x54) /* RX 20 Channel table ptr reg */ -#define malrxctp21r (MAL_DCR_BASE+0x55) /* RX 21 Channel table ptr reg */ -#define malrxctp22r (MAL_DCR_BASE+0x56) /* RX 22 Channel table ptr reg */ -#define malrxctp23r (MAL_DCR_BASE+0x57) /* RX 23 Channel table ptr reg */ -#define malrxctp24r (MAL_DCR_BASE+0x58) /* RX 24 Channel table ptr reg */ -#define malrxctp25r (MAL_DCR_BASE+0x59) /* RX 25 Channel table ptr reg */ -#define malrxctp26r (MAL_DCR_BASE+0x5A) /* RX 26 Channel table ptr reg */ -#define malrxctp27r (MAL_DCR_BASE+0x5B) /* RX 27 Channel table ptr reg */ -#define malrxctp28r (MAL_DCR_BASE+0x5C) /* RX 28 Channel table ptr reg */ -#define malrxctp29r (MAL_DCR_BASE+0x5D) /* RX 29 Channel table ptr reg */ -#define malrxctp30r (MAL_DCR_BASE+0x5E) /* RX 30 Channel table ptr reg */ -#define malrxctp31r (MAL_DCR_BASE+0x5F) /* RX 31 Channel table ptr reg */ -#define malrcbs0 (MAL_DCR_BASE+0x60) /* RX 0 Channel buffer size reg */ -#define malrcbs1 (MAL_DCR_BASE+0x61) /* RX 1 Channel buffer size reg */ -#define malrcbs2 (MAL_DCR_BASE+0x62) /* RX 2 Channel buffer size reg */ -#define malrcbs3 (MAL_DCR_BASE+0x63) /* RX 3 Channel buffer size reg */ -#define malrcbs4 (MAL_DCR_BASE+0x64) /* RX 4 Channel buffer size reg */ -#define malrcbs5 (MAL_DCR_BASE+0x65) /* RX 5 Channel buffer size reg */ -#define malrcbs6 (MAL_DCR_BASE+0x66) /* RX 6 Channel buffer size reg */ -#define malrcbs7 (MAL_DCR_BASE+0x67) /* RX 7 Channel buffer size reg */ -#define malrcbs8 (MAL_DCR_BASE+0x68) /* RX 8 Channel buffer size reg */ -#define malrcbs9 (MAL_DCR_BASE+0x69) /* RX 9 Channel buffer size reg */ -#define malrcbs10 (MAL_DCR_BASE+0x6A) /* RX 10 Channel buffer size reg */ -#define malrcbs11 (MAL_DCR_BASE+0x6B) /* RX 11 Channel buffer size reg */ -#define malrcbs12 (MAL_DCR_BASE+0x6C) /* RX 12 Channel buffer size reg */ -#define malrcbs13 (MAL_DCR_BASE+0x6D) /* RX 13 Channel buffer size reg */ -#define malrcbs14 (MAL_DCR_BASE+0x6E) /* RX 14 Channel buffer size reg */ -#define malrcbs15 (MAL_DCR_BASE+0x6F) /* RX 15 Channel buffer size reg */ -#define malrcbs16 (MAL_DCR_BASE+0x70) /* RX 16 Channel buffer size reg */ -#define malrcbs17 (MAL_DCR_BASE+0x71) /* RX 17 Channel buffer size reg */ -#define malrcbs18 (MAL_DCR_BASE+0x72) /* RX 18 Channel buffer size reg */ -#define malrcbs19 (MAL_DCR_BASE+0x73) /* RX 19 Channel buffer size reg */ -#define malrcbs20 (MAL_DCR_BASE+0x74) /* RX 20 Channel buffer size reg */ -#define malrcbs21 (MAL_DCR_BASE+0x75) /* RX 21 Channel buffer size reg */ -#define malrcbs22 (MAL_DCR_BASE+0x76) /* RX 22 Channel buffer size reg */ -#define malrcbs23 (MAL_DCR_BASE+0x77) /* RX 23 Channel buffer size reg */ -#define malrcbs24 (MAL_DCR_BASE+0x78) /* RX 24 Channel buffer size reg */ -#define malrcbs25 (MAL_DCR_BASE+0x79) /* RX 25 Channel buffer size reg */ -#define malrcbs26 (MAL_DCR_BASE+0x7A) /* RX 26 Channel buffer size reg */ -#define malrcbs27 (MAL_DCR_BASE+0x7B) /* RX 27 Channel buffer size reg */ -#define malrcbs28 (MAL_DCR_BASE+0x7C) /* RX 28 Channel buffer size reg */ -#define malrcbs29 (MAL_DCR_BASE+0x7D) /* RX 29 Channel buffer size reg */ -#define malrcbs30 (MAL_DCR_BASE+0x7E) /* RX 30 Channel buffer size reg */ -#define malrcbs31 (MAL_DCR_BASE+0x7F) /* RX 31 Channel buffer size reg */ - -#else /* !defined(CONFIG_405EZ) */ - -#define MAL_DCR_BASE 0x180 -#define malmcr (MAL_DCR_BASE+0x00) /* MAL Config reg */ -#define malesr (MAL_DCR_BASE+0x01) /* Error Status reg (Read/Clear) */ -#define malier (MAL_DCR_BASE+0x02) /* Interrupt enable reg */ -#define maldbr (MAL_DCR_BASE+0x03) /* Mal Debug reg (Read only) */ -#define maltxcasr (MAL_DCR_BASE+0x04) /* TX Channel active reg (set) */ -#define maltxcarr (MAL_DCR_BASE+0x05) /* TX Channel active reg (Reset) */ -#define maltxeobisr (MAL_DCR_BASE+0x06) /* TX End of buffer int status reg */ -#define maltxdeir (MAL_DCR_BASE+0x07) /* TX Descr. Error Int reg */ -#define malrxcasr (MAL_DCR_BASE+0x10) /* RX Channel active reg (set) */ -#define malrxcarr (MAL_DCR_BASE+0x11) /* RX Channel active reg (Reset) */ -#define malrxeobisr (MAL_DCR_BASE+0x12) /* RX End of buffer int status reg */ -#define malrxdeir (MAL_DCR_BASE+0x13) /* RX Descr. Error Int reg */ -#define maltxctp0r (MAL_DCR_BASE+0x20) /* TX 0 Channel table pointer reg */ -#define maltxctp1r (MAL_DCR_BASE+0x21) /* TX 1 Channel table pointer reg */ -#define maltxctp2r (MAL_DCR_BASE+0x22) /* TX 2 Channel table pointer reg */ -#define malrxctp0r (MAL_DCR_BASE+0x40) /* RX 0 Channel table pointer reg */ -#define malrxctp1r (MAL_DCR_BASE+0x41) /* RX 1 Channel table pointer reg */ -#define malrcbs0 (MAL_DCR_BASE+0x60) /* RX 0 Channel buffer size reg */ -#define malrcbs1 (MAL_DCR_BASE+0x61) /* RX 1 Channel buffer size reg */ -#endif /* defined(CONFIG_405EZ) */ +#else +#define MAL_DCR_BASE 0x180 +#endif +#define MAL0_CFG (MAL_DCR_BASE + 0x00) /* MAL Config reg */ +#define MAL0_ESR (MAL_DCR_BASE + 0x01) /* Err Status (Read/Clear)*/ +#define MAL0_IER (MAL_DCR_BASE + 0x02) /* Interrupt enable */ +#define MAL0_TXCASR (MAL_DCR_BASE + 0x04) /* TX Channel active (set)*/ +#define MAL0_TXCARR (MAL_DCR_BASE + 0x05) /* TX Channel active (reset)*/ +#define MAL0_TXEOBISR (MAL_DCR_BASE + 0x06) /* TX End of buffer int status*/ +#define MAL0_TXDEIR (MAL_DCR_BASE + 0x07) /* TX Descr. Error Int reg */ +#define MAL0_RXCASR (MAL_DCR_BASE + 0x10) /* RX Channel active (set) */ +#define MAL0_RXCARR (MAL_DCR_BASE + 0x11) /* RX Channel active (reset) */ +#define MAL0_RXEOBISR (MAL_DCR_BASE + 0x12) /* RX End of buffer int status*/ +#define MAL0_RXDEIR (MAL_DCR_BASE + 0x13) /* RX Descr. Error Int reg */ +#define MAL0_TXCTP0R (MAL_DCR_BASE + 0x20) /* TX 0 Channel table ptr */ +#define MAL0_TXCTP1R (MAL_DCR_BASE + 0x21) /* TX 1 Channel table ptr */ +#define MAL0_TXCTP2R (MAL_DCR_BASE + 0x22) /* TX 2 Channel table ptr */ +#define MAL0_TXCTP3R (MAL_DCR_BASE + 0x23) /* TX 3 Channel table ptr */ +#define MAL0_RXCTP0R (MAL_DCR_BASE + 0x40) /* RX 0 Channel table ptr */ +#define MAL0_RXCTP1R (MAL_DCR_BASE + 0x41) /* RX 1 Channel table ptr */ +#define MAL0_RXCTP2R (MAL_DCR_BASE + 0x42) /* RX 2 Channel table ptr */ +#define MAL0_RXCTP3R (MAL_DCR_BASE + 0x43) /* RX 3 Channel table ptr */ +#define MAL0_RXCTP8R (MAL_DCR_BASE + 0x48) /* RX 8 Channel table ptr */ +#define MAL0_RXCTP16R (MAL_DCR_BASE + 0x50) /* RX 16 Channel table ptr */ +#define MAL0_RXCTP24R (MAL_DCR_BASE + 0x58) /* RX 24 Channel table ptr */ +#define MAL0_RCBS0 (MAL_DCR_BASE + 0x60) /* RX 0 Channel buffer size */ +#define MAL0_RCBS1 (MAL_DCR_BASE + 0x61) /* RX 1 Channel buffer size */ +#define MAL0_RCBS2 (MAL_DCR_BASE + 0x62) /* RX 2 Channel buffer size */ +#define MAL0_RCBS3 (MAL_DCR_BASE + 0x63) /* RX 3 Channel buffer size */ +#define MAL0_RCBS8 (MAL_DCR_BASE + 0x68) /* RX 8 Channel buffer size */ +#define MAL0_RCBS16 (MAL_DCR_BASE + 0x70) /* RX 16 Channel buffer size */ +#define MAL0_RCBS24 (MAL_DCR_BASE + 0x78) /* RX 24 Channel buffer size */ /*----------------------------------------------------------------------------- | IIC Register Offsets @@ -730,27 +603,19 @@ ******************************************************************************/ #if defined(CONFIG_405EZ) #define OCM_DCR_BASE 0x020 -#define ocmplb3cr1 (OCM_DCR_BASE+0x00) /* OCM PLB3 Bank 1 Config Reg */ -#define ocmplb3cr2 (OCM_DCR_BASE+0x01) /* OCM PLB3 Bank 2 Config Reg */ -#define ocmplb3bear (OCM_DCR_BASE+0x02) /* OCM PLB3 Bus Error Add Reg */ -#define ocmplb3besr0 (OCM_DCR_BASE+0x03) /* OCM PLB3 Bus Error Stat Reg 0 */ -#define ocmplb3besr1 (OCM_DCR_BASE+0x04) /* OCM PLB3 Bus Error Stat Reg 1 */ -#define ocmcid (OCM_DCR_BASE+0x05) /* OCM Core ID */ -#define ocmrevid (OCM_DCR_BASE+0x06) /* OCM Revision ID */ -#define ocmplb3dpc (OCM_DCR_BASE+0x07) /* OCM PLB3 Data Parity Check */ -#define ocmdscr1 (OCM_DCR_BASE+0x08) /* OCM D-side Bank 1 Config Reg */ -#define ocmdscr2 (OCM_DCR_BASE+0x09) /* OCM D-side Bank 2 Config Reg */ -#define ocmiscr1 (OCM_DCR_BASE+0x0A) /* OCM I-side Bank 1 Config Reg */ -#define ocmiscr2 (OCM_DCR_BASE+0x0B) /* OCM I-side Bank 2 Config Reg */ -#define ocmdsisdpc (OCM_DCR_BASE+0x0C) /* OCM D-side/I-side Data Par Chk*/ -#define ocmdsisbear (OCM_DCR_BASE+0x0D) /* OCM D-side/I-side Bus Err Addr*/ -#define ocmdsisbesr (OCM_DCR_BASE+0x0E) /* OCM D-side/I-side Bus Err Stat*/ +#define OCM0_PLBCR1 (OCM_DCR_BASE + 0x00) /* OCM PLB3 Bank 1 Config */ +#define OCM0_PLBCR2 (OCM_DCR_BASE + 0x01) /* OCM PLB3 Bank 2 Config */ +#define OCM0_PLBBEAR (OCM_DCR_BASE + 0x02) /* OCM PLB3 Bus Error Add */ +#define OCM0_DSRC1 (OCM_DCR_BASE + 0x08) /* OCM D-side Bank 1 Config */ +#define OCM0_DSRC2 (OCM_DCR_BASE + 0x09) /* OCM D-side Bank 2 Config */ +#define OCM0_ISRC1 (OCM_DCR_BASE + 0x0A) /* OCM I-side Bank 1Config */ +#define OCM0_ISRC2 (OCM_DCR_BASE + 0x0B) /* OCM I-side Bank 2 Config */ +#define OCM0_DISDPC (OCM_DCR_BASE + 0x0C) /* OCM D-/I-side Data Par Chk*/ #else #define OCM_DCR_BASE 0x018 -#define ocmisarc (OCM_DCR_BASE+0x00) /* OCM I-side address compare reg */ -#define ocmiscntl (OCM_DCR_BASE+0x01) /* OCM I-side control reg */ -#define ocmdsarc (OCM_DCR_BASE+0x02) /* OCM D-side address compare reg */ -#define ocmdscntl (OCM_DCR_BASE+0x03) /* OCM D-side control reg */ +#define OCM0_ISCNTL (OCM_DCR_BASE+0x01) /* OCM I-side control reg */ +#define OCM0_DSARC (OCM_DCR_BASE+0x02) /* OCM D-side address compare */ +#define OCM0_DSCNTL (OCM_DCR_BASE+0x03) /* OCM D-side control */ #endif /* CONFIG_405EZ */ /****************************************************************************** @@ -876,9 +741,9 @@ #define SDR0_SRST_AHB PPC_REG_VAL(30, 1) #define SDR0_SRST_NDFC PPC_REG_VAL(31, 1) -#define sdr_uart0 0x0120 /* UART0 Config */ -#define sdr_uart1 0x0121 /* UART1 Config */ -#define sdr_mfr 0x4300 /* SDR0_MFR reg */ +#define SDR0_UART0 0x0120 /* UART0 Config */ +#define SDR0_UART1 0x0121 /* UART1 Config */ +#define SDR0_MFR 0x4300 /* SDR0_MFR reg */ /* Defines for CPC0_EPRCSR register */ #define CPC0_EPRCSR_E0NFE 0x80000000 @@ -890,18 +755,16 @@ #define CPC0_EPRCSR_E1PCI 0x00000002 #define CPC0_EPRCSR_E0PCI 0x00000001 -#define cpr0_clkupd 0x020 -#define cpr0_pllc 0x040 -#define cpr0_plld 0x060 -#define cpr0_cpud 0x080 -#define cpr0_plbd 0x0a0 -#define cpr0_opbd 0x0c0 -#define cpr0_perd 0x0e0 -#define cpr0_ahbd 0x100 -#define cpr0_icfg 0x140 - -#define SDR_PINSTP 0x0040 -#define sdr_sdcs 0x0060 +#define CPR0_CLKUPD 0x020 +#define CPR0_PLLC 0x040 +#define CPR0_PLLD 0x060 +#define CPR0_CPUD 0x080 +#define CPR0_PLBD 0x0a0 +#define CPR0_OPBD 0x0c0 +#define CPR0_PERD 0x0e0 + +#define SDR0_PINSTP 0x0040 +#define SDR0_SDCS0 0x0060 #define SDR0_SDCS_SDD (0x80000000 >> 31) diff --git a/include/ppc440.h b/include/ppc440.h index 7f34fda8c..378a9de20 100644 --- a/include/ppc440.h +++ b/include/ppc440.h @@ -58,64 +58,55 @@ | Clocking Controller +----------------------------------------------------------------------------*/ /* values for clkcfga register - indirect addressing of these regs */ -#define clk_clkukpd 0x0020 -#define clk_pllc 0x0040 -#define clk_plld 0x0060 -#define clk_primad 0x0080 -#define clk_primbd 0x00a0 -#define clk_opbd 0x00c0 -#define clk_perd 0x00e0 -#define clk_mald 0x0100 -#define clk_spcid 0x0120 -#define clk_icfg 0x0140 +#define CPR0_PLLC 0x0040 +#define CPR0_PLLD 0x0060 +#define CPR0_PRIMAD 0x0080 +#define CPR0_PRIMBD 0x00a0 +#define CPR0_OPBD 0x00c0 +#define CPR0_PERD 0x00e0 +#define CPR0_MALD 0x0100 +#define CPR0_SPCID 0x0120 +#define CPR0_ICFG 0x0140 /* 440gx sdr register definations */ -#define sdr_sdstp0 0x0020 /* */ -#define sdr_sdstp1 0x0021 /* */ -#define SDR_PINSTP 0x0040 -#define sdr_sdcs 0x0060 -#define sdr_ecid0 0x0080 -#define sdr_ecid1 0x0081 -#define sdr_ecid2 0x0082 -#define sdr_jtag 0x00c0 +#define SDR0_SDSTP0 0x0020 /* */ +#define SDR0_SDSTP1 0x0021 /* */ +#define SDR0_PINSTP 0x0040 +#define SDR0_SDCS0 0x0060 #if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) #define SDR0_DDRCFG 0x00e0 #endif /* defined(CONFIG_440EPX) || defined(CONFIG_440GRX) */ -#define sdr_ebc 0x0100 -#define sdr_uart0 0x0120 /* UART0 Config */ -#define sdr_uart1 0x0121 /* UART1 Config */ -#define sdr_uart2 0x0122 /* UART2 Config */ -#define sdr_uart3 0x0123 /* UART3 Config */ -#define sdr_cp440 0x0180 -#define sdr_xcr 0x01c0 -#define sdr_xpllc 0x01c1 -#define sdr_xplld 0x01c2 -#define sdr_srst 0x0200 -#define sdr_slpipe 0x0220 -#define sdr_amp0 0x0240 /* Override PLB4 prioritiy for up to 8 masters */ -#define sdr_amp1 0x0241 /* Override PLB3 prioritiy for up to 8 masters */ -#define sdr_mirq0 0x0260 -#define sdr_mirq1 0x0261 -#define sdr_maltbl 0x0280 -#define sdr_malrbl 0x02a0 -#define sdr_maltbs 0x02c0 -#define sdr_malrbs 0x02e0 -#define sdr_pci0 0x0300 -#define sdr_usb0 0x0320 -#define sdr_cust0 0x4000 -#define sdr_cust1 0x4002 -#define sdr_pfc0 0x4100 /* Pin Function 0 */ -#define sdr_pfc1 0x4101 /* Pin Function 1 */ -#define sdr_plbtr 0x4200 -#define sdr_mfr 0x4300 /* SDR0_MFR reg */ +#define SDR0_EBC 0x0100 +#define SDR0_UART0 0x0120 /* UART0 Config */ +#define SDR0_UART1 0x0121 /* UART1 Config */ +#define SDR0_UART2 0x0122 /* UART2 Config */ +#define SDR0_UART3 0x0123 /* UART3 Config */ +#define SDR0_CP440 0x0180 +#define SDR0_XCR 0x01c0 +#define SDR0_XPLLC 0x01c1 +#define SDR0_XPLLD 0x01c2 +#define SDR0_SRST 0x0200 +#define SD0_AMP0 0x0240 /* Override PLB4 prioritiy for up to 8 masters */ +#define SD0_AMP1 0x0241 /* Override PLB3 prioritiy for up to 8 masters */ +#if defined(CONFIG_460EX) || defined(CONFIG_460GT) +#define SDR0_PCI0 0x01c0 +#else +#define SDR0_PCI0 0x0300 +#endif +#define SDR0_USB0 0x0320 +#define SDR0_CUST0 0x4000 +#define SDR0_CUST1 0x4002 +#define SDR0_PFC0 0x4100 /* Pin Function 0 */ +#define SDR0_PFC1 0x4101 /* Pin Function 1 */ +#define SDR0_MFR 0x4300 /* SDR0_MFR reg */ #ifdef CONFIG_440GX -#define sdr_amp 0x0240 -#define sdr_xpllc 0x01c1 -#define sdr_xplld 0x01c2 -#define sdr_xcr 0x01c0 -#define sdr_sdstp2 0x4001 -#define sdr_sdstp3 0x4003 +#define SD0_AMP 0x0240 +#define SDR0_XPLLC 0x01c1 +#define SDR0_XPLLD 0x01c2 +#define SDR0_XCR 0x01c0 +#define SDR0_SDSTP2 0x4001 +#define SDR0_SDSTP3 0x4003 #endif /* CONFIG_440GX */ /*----------------------------------------------------------------------------+ @@ -143,101 +134,66 @@ #define MMUCR_STID_MASK 0x000000FF #ifdef CONFIG_440SPE -#undef sdr_sdstp2 -#define sdr_sdstp2 0x0022 -#undef sdr_sdstp3 -#define sdr_sdstp3 0x0023 -#define sdr_ddr0 0x00E1 -#define sdr_uart2 0x0122 -#define sdr_xcr0 0x01c0 -/* #define sdr_xcr1 0x01c3 only one PCIX - SG */ -/* #define sdr_xcr2 0x01c6 only one PCIX - SG */ -#define sdr_xpllc0 0x01c1 -#define sdr_xplld0 0x01c2 -#define sdr_xpllc1 0x01c4 /*notRCW - SG */ -#define sdr_xplld1 0x01c5 /*notRCW - SG */ -#define sdr_xpllc2 0x01c7 /*notRCW - SG */ -#define sdr_xplld2 0x01c8 /*notRCW - SG */ -#define sdr_amp0 0x0240 -#define sdr_amp1 0x0241 -#define sdr_cust2 0x4004 -#define sdr_cust3 0x4006 -#define sdr_sdstp4 0x4001 -#define sdr_sdstp5 0x4003 -#define sdr_sdstp6 0x4005 -#define sdr_sdstp7 0x4007 +#undef SDR0_SDSTP2 +#define SDR0_SDSTP2 0x0022 +#undef SDR0_SDSTP3 +#define SDR0_SDSTP3 0x0023 +#define SDR0_DDR0 0x00E1 +#define SDR0_UART2 0x0122 +#define SDR0_XCR0 0x01c0 +#define SDR0_XCR1 0x01c3 +#define SDR0_XCR2 0x01c6 +#define SDR0_XPLLC0 0x01c1 +#define SDR0_XPLLD0 0x01c2 +#define SDR0_XPLLC1 0x01c4 /*notRCW - SG */ +#define SDR0_XPLLD1 0x01c5 /*notRCW - SG */ +#define SDR0_XPLLC2 0x01c7 /*notRCW - SG */ +#define SDR0_XPLLD2 0x01c8 /*notRCW - SG */ +#define SD0_AMP0 0x0240 +#define SD0_AMP1 0x0241 +#define SDR0_CUST2 0x4004 +#define SDR0_CUST3 0x4006 +#define SDR0_SDSTP4 0x4001 +#define SDR0_SDSTP5 0x4003 +#define SDR0_SDSTP6 0x4005 +#define SDR0_SDSTP7 0x4007 #endif /* CONFIG_440SPE */ /*----------------------------------------------------------------------------- | External Bus Controller +----------------------------------------------------------------------------*/ -/* values for ebccfga register - indirect addressing of these regs */ -#define pb0cr 0x00 /* periph bank 0 config reg */ -#define pb1cr 0x01 /* periph bank 1 config reg */ -#define pb2cr 0x02 /* periph bank 2 config reg */ -#define pb3cr 0x03 /* periph bank 3 config reg */ -#define pb4cr 0x04 /* periph bank 4 config reg */ -#define pb5cr 0x05 /* periph bank 5 config reg */ -#define pb6cr 0x06 /* periph bank 6 config reg */ -#define pb7cr 0x07 /* periph bank 7 config reg */ -#define pb0ap 0x10 /* periph bank 0 access parameters */ -#define pb1ap 0x11 /* periph bank 1 access parameters */ -#define pb2ap 0x12 /* periph bank 2 access parameters */ -#define pb3ap 0x13 /* periph bank 3 access parameters */ -#define pb4ap 0x14 /* periph bank 4 access parameters */ -#define pb5ap 0x15 /* periph bank 5 access parameters */ -#define pb6ap 0x16 /* periph bank 6 access parameters */ -#define pb7ap 0x17 /* periph bank 7 access parameters */ -#define pbear 0x20 /* periph bus error addr reg */ -#define pbesr 0x21 /* periph bus error status reg */ -#define xbcfg 0x23 /* external bus configuration reg */ +/* values for EBC0_CFGADDR register - indirect addressing of these regs */ +#define PB0CR 0x00 /* periph bank 0 config reg */ +#define PB1CR 0x01 /* periph bank 1 config reg */ +#define PB2CR 0x02 /* periph bank 2 config reg */ +#define PB3CR 0x03 /* periph bank 3 config reg */ +#define PB4CR 0x04 /* periph bank 4 config reg */ +#define PB5CR 0x05 /* periph bank 5 config reg */ +#define PB6CR 0x06 /* periph bank 6 config reg */ +#define PB7CR 0x07 /* periph bank 7 config reg */ +#define PB0AP 0x10 /* periph bank 0 access parameters */ +#define PB1AP 0x11 /* periph bank 1 access parameters */ +#define PB2AP 0x12 /* periph bank 2 access parameters */ +#define PB3AP 0x13 /* periph bank 3 access parameters */ +#define PB4AP 0x14 /* periph bank 4 access parameters */ +#define PB5AP 0x15 /* periph bank 5 access parameters */ +#define PB6AP 0x16 /* periph bank 6 access parameters */ +#define PB7AP 0x17 /* periph bank 7 access parameters */ +#define PBEAR 0x20 /* periph bus error addr reg */ +#define PBESR 0x21 /* periph bus error status reg */ #define EBC0_CFG 0x23 /* external bus configuration reg */ -#define xbcid 0x24 /* external bus core id reg */ #if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) -/* PLB4 to PLB3 Bridge OUT */ -#define P4P3_DCR_BASE 0x020 -#define p4p3_esr0_read (P4P3_DCR_BASE+0x0) -#define p4p3_esr0_write (P4P3_DCR_BASE+0x1) -#define p4p3_eadr (P4P3_DCR_BASE+0x2) -#define p4p3_euadr (P4P3_DCR_BASE+0x3) -#define p4p3_esr1_read (P4P3_DCR_BASE+0x4) -#define p4p3_esr1_write (P4P3_DCR_BASE+0x5) -#define p4p3_confg (P4P3_DCR_BASE+0x6) -#define p4p3_pic (P4P3_DCR_BASE+0x7) -#define p4p3_peir (P4P3_DCR_BASE+0x8) -#define p4p3_rev (P4P3_DCR_BASE+0xA) - -/* PLB3 to PLB4 Bridge IN */ -#define P3P4_DCR_BASE 0x030 -#define p3p4_esr0_read (P3P4_DCR_BASE+0x0) -#define p3p4_esr0_write (P3P4_DCR_BASE+0x1) -#define p3p4_eadr (P3P4_DCR_BASE+0x2) -#define p3p4_euadr (P3P4_DCR_BASE+0x3) -#define p3p4_esr1_read (P3P4_DCR_BASE+0x4) -#define p3p4_esr1_write (P3P4_DCR_BASE+0x5) -#define p3p4_confg (P3P4_DCR_BASE+0x6) -#define p3p4_pic (P3P4_DCR_BASE+0x7) -#define p3p4_peir (P3P4_DCR_BASE+0x8) -#define p3p4_rev (P3P4_DCR_BASE+0xA) - /* PLB3 Arbiter */ -#define PLB3_DCR_BASE 0x070 -#define plb3_revid (PLB3_DCR_BASE+0x2) -#define plb3_besr (PLB3_DCR_BASE+0x3) -#define plb3_bear (PLB3_DCR_BASE+0x6) -#define plb3_acr (PLB3_DCR_BASE+0x7) +#define PLB3_DCR_BASE 0x070 +#define PLB3_ACR (PLB3_DCR_BASE + 0x7) /* PLB4 Arbiter - PowerPC440EP Pass1 */ -#define PLB4_DCR_BASE 0x080 -#define plb4_acr (PLB4_DCR_BASE+0x1) -#define plb4_revid (PLB4_DCR_BASE+0x2) -#define plb4_besr (PLB4_DCR_BASE+0x4) -#define plb4_bearl (PLB4_DCR_BASE+0x6) -#define plb4_bearh (PLB4_DCR_BASE+0x7) +#define PLB4_DCR_BASE 0x080 +#define PLB4_ACR (PLB4_DCR_BASE + 0x1) #define PLB4_ACR_WRP (0x80000000 >> 7) @@ -578,24 +534,16 @@ #define CNTRL_DCR_BASE 0x0b0 #endif -#define cpc0_er (CNTRL_DCR_BASE+0x00) /* CPM enable register */ -#define cpc0_fr (CNTRL_DCR_BASE+0x01) /* CPM force register */ -#define cpc0_sr (CNTRL_DCR_BASE+0x02) /* CPM status register */ - -#define cpc0_sys0 (CNTRL_DCR_BASE+0x30) /* System configuration reg 0 */ -#define cpc0_sys1 (CNTRL_DCR_BASE+0x31) /* System configuration reg 1 */ -#define cpc0_cust0 (CNTRL_DCR_BASE+0x32) /* Customer configuration reg 0 */ -#define cpc0_cust1 (CNTRL_DCR_BASE+0x33) /* Customer configuration reg 1 */ +#define CPC0_SYS0 (CNTRL_DCR_BASE+0x30) /* System configuration reg 0 */ +#define CPC0_SYS1 (CNTRL_DCR_BASE+0x31) /* System configuration reg 1 */ -#define cpc0_strp0 (CNTRL_DCR_BASE+0x34) /* Power-on config reg 0 (RO) */ -#define cpc0_strp1 (CNTRL_DCR_BASE+0x35) /* Power-on config reg 1 (RO) */ -#define cpc0_strp2 (CNTRL_DCR_BASE+0x36) /* Power-on config reg 2 (RO) */ -#define cpc0_strp3 (CNTRL_DCR_BASE+0x37) /* Power-on config reg 3 (RO) */ +#define CPC0_STRP0 (CNTRL_DCR_BASE+0x34) /* Power-on config reg 0 (RO) */ +#define CPC0_STRP1 (CNTRL_DCR_BASE+0x35) /* Power-on config reg 1 (RO) */ -#define cpc0_gpio (CNTRL_DCR_BASE+0x38) /* GPIO config reg (440GP) */ +#define CPC0_GPIO (CNTRL_DCR_BASE+0x38) /* GPIO config reg (440GP) */ -#define cntrl0 (CNTRL_DCR_BASE+0x3b) /* Control 0 register */ -#define cntrl1 (CNTRL_DCR_BASE+0x3a) /* Control 1 register */ +#define CPC0_CR0 (CNTRL_DCR_BASE+0x3b) /* Control 0 register */ +#define CPC0_CR1 (CNTRL_DCR_BASE+0x3a) /* Control 1 register */ /*----------------------------------------------------------------------------- | DMA @@ -605,91 +553,59 @@ #else #define DMA_DCR_BASE 0x100 #endif -#define dmacr0 (DMA_DCR_BASE+0x00) /* DMA channel control register 0 */ -#define dmact0 (DMA_DCR_BASE+0x01) /* DMA count register 0 */ -#define dmasah0 (DMA_DCR_BASE+0x02) /* DMA source address high 0 */ -#define dmasal0 (DMA_DCR_BASE+0x03) /* DMA source address low 0 */ -#define dmadah0 (DMA_DCR_BASE+0x04) /* DMA destination address high 0 */ -#define dmadal0 (DMA_DCR_BASE+0x05) /* DMA destination address low 0 */ -#define dmasgh0 (DMA_DCR_BASE+0x06) /* DMA scatter/gather desc addr high 0 */ -#define dmasgl0 (DMA_DCR_BASE+0x07) /* DMA scatter/gather desc addr low 0 */ -#define dmacr1 (DMA_DCR_BASE+0x08) /* DMA channel control register 1 */ -#define dmact1 (DMA_DCR_BASE+0x09) /* DMA count register 1 */ -#define dmasah1 (DMA_DCR_BASE+0x0a) /* DMA source address high 1 */ -#define dmasal1 (DMA_DCR_BASE+0x0b) /* DMA source address low 1 */ -#define dmadah1 (DMA_DCR_BASE+0x0c) /* DMA destination address high 1 */ -#define dmadal1 (DMA_DCR_BASE+0x0d) /* DMA destination address low 1 */ -#define dmasgh1 (DMA_DCR_BASE+0x0e) /* DMA scatter/gather desc addr high 1 */ -#define dmasgl1 (DMA_DCR_BASE+0x0f) /* DMA scatter/gather desc addr low 1 */ -#define dmacr2 (DMA_DCR_BASE+0x10) /* DMA channel control register 2 */ -#define dmact2 (DMA_DCR_BASE+0x11) /* DMA count register 2 */ -#define dmasah2 (DMA_DCR_BASE+0x12) /* DMA source address high 2 */ -#define dmasal2 (DMA_DCR_BASE+0x13) /* DMA source address low 2 */ -#define dmadah2 (DMA_DCR_BASE+0x14) /* DMA destination address high 2 */ -#define dmadal2 (DMA_DCR_BASE+0x15) /* DMA destination address low 2 */ -#define dmasgh2 (DMA_DCR_BASE+0x16) /* DMA scatter/gather desc addr high 2 */ -#define dmasgl2 (DMA_DCR_BASE+0x17) /* DMA scatter/gather desc addr low 2 */ -#define dmacr3 (DMA_DCR_BASE+0x18) /* DMA channel control register 2 */ -#define dmact3 (DMA_DCR_BASE+0x19) /* DMA count register 2 */ -#define dmasah3 (DMA_DCR_BASE+0x1a) /* DMA source address high 2 */ -#define dmasal3 (DMA_DCR_BASE+0x1b) /* DMA source address low 2 */ -#define dmadah3 (DMA_DCR_BASE+0x1c) /* DMA destination address high 2 */ -#define dmadal3 (DMA_DCR_BASE+0x1d) /* DMA destination address low 2 */ -#define dmasgh3 (DMA_DCR_BASE+0x1e) /* DMA scatter/gather desc addr high 2 */ -#define dmasgl3 (DMA_DCR_BASE+0x1f) /* DMA scatter/gather desc addr low 2 */ -#define dmasr (DMA_DCR_BASE+0x20) /* DMA status register */ -#define dmasgc (DMA_DCR_BASE+0x23) /* DMA scatter/gather command register */ -#define dmaslp (DMA_DCR_BASE+0x25) /* DMA sleep mode register */ -#define dmapol (DMA_DCR_BASE+0x26) /* DMA polarity configuration register */ +#define DMACR0 (DMA_DCR_BASE+0x00) /* DMA channel control register 0 */ +#define DMACT0 (DMA_DCR_BASE+0x01) /* DMA count register 0 */ +#define DMACR1 (DMA_DCR_BASE+0x08) /* DMA channel control register 1 */ +#define DMACT1 (DMA_DCR_BASE+0x09) /* DMA count register 1 */ +#define DMACR2 (DMA_DCR_BASE+0x10) /* DMA channel control register 2 */ +#define DMACT2 (DMA_DCR_BASE+0x11) /* DMA count register 2 */ +#define DMACR3 (DMA_DCR_BASE+0x18) /* DMA channel control register 2 */ +#define DMASR (DMA_DCR_BASE+0x20) /* DMA status register */ +#define DMASGC (DMA_DCR_BASE+0x23) /* DMA scatter/gather command register */ /*----------------------------------------------------------------------------- | Memory Access Layer +----------------------------------------------------------------------------*/ #define MAL_DCR_BASE 0x180 -#define malmcr (MAL_DCR_BASE+0x00) /* MAL Config reg */ -#define malesr (MAL_DCR_BASE+0x01) /* Error Status reg (Read/Clear) */ -#define malier (MAL_DCR_BASE+0x02) /* Interrupt enable reg */ -#define maldbr (MAL_DCR_BASE+0x03) /* Mal Debug reg (Read only) */ -#define maltxcasr (MAL_DCR_BASE+0x04) /* TX Channel active reg (set) */ -#define maltxcarr (MAL_DCR_BASE+0x05) /* TX Channel active reg (Reset) */ -#define maltxeobisr (MAL_DCR_BASE+0x06) /* TX End of buffer int status reg */ -#define maltxdeir (MAL_DCR_BASE+0x07) /* TX Descr. Error Int reg */ -#define maltxtattrr (MAL_DCR_BASE+0x08) /* TX PLB attribute reg */ -#define maltxbattr (MAL_DCR_BASE+0x09) /* TX descriptor base addr reg */ -#define malrxcasr (MAL_DCR_BASE+0x10) /* RX Channel active reg (set) */ -#define malrxcarr (MAL_DCR_BASE+0x11) /* RX Channel active reg (Reset) */ -#define malrxeobisr (MAL_DCR_BASE+0x12) /* RX End of buffer int status reg */ -#define malrxdeir (MAL_DCR_BASE+0x13) /* RX Descr. Error Int reg */ -#define malrxtattrr (MAL_DCR_BASE+0x14) /* RX PLB attribute reg */ -#define malrxbattr (MAL_DCR_BASE+0x15) /* RX descriptor base addr reg */ -#define maltxctp0r (MAL_DCR_BASE+0x20) /* TX 0 Channel table pointer reg */ -#define maltxctp1r (MAL_DCR_BASE+0x21) /* TX 1 Channel table pointer reg */ -#define maltxctp2r (MAL_DCR_BASE+0x22) /* TX 2 Channel table pointer reg */ -#define maltxctp3r (MAL_DCR_BASE+0x23) /* TX 3 Channel table pointer reg */ -#define malrxctp0r (MAL_DCR_BASE+0x40) /* RX 0 Channel table pointer reg */ -#define malrxctp1r (MAL_DCR_BASE+0x41) /* RX 1 Channel table pointer reg */ -#define malrcbs0 (MAL_DCR_BASE+0x60) /* RX 0 Channel buffer size reg */ -#define malrcbs1 (MAL_DCR_BASE+0x61) /* RX 1 Channel buffer size reg */ +#define MAL0_CFG (MAL_DCR_BASE + 0x00) /* MAL Config reg */ +#define MAL0_ESR (MAL_DCR_BASE + 0x01) /* Error Status (Read/Clear) */ +#define MAL0_IER (MAL_DCR_BASE + 0x02) /* Interrupt enable */ +#define MAL0_TXCASR (MAL_DCR_BASE + 0x04) /* TX Channel active (set) */ +#define MAL0_TXCARR (MAL_DCR_BASE + 0x05) /* TX Channel active (reset) */ +#define MAL0_TXEOBISR (MAL_DCR_BASE + 0x06) /* TX End of buffer int status */ +#define MAL0_TXDEIR (MAL_DCR_BASE + 0x07) /* TX Descr. Error Int */ +#define MAL0_TXBADDR (MAL_DCR_BASE + 0x09) /* TX descriptor base addr*/ +#define MAL0_RXCASR (MAL_DCR_BASE + 0x10) /* RX Channel active (set) */ +#define MAL0_RXCARR (MAL_DCR_BASE + 0x11) /* RX Channel active (reset) */ +#define MAL0_RXEOBISR (MAL_DCR_BASE + 0x12) /* RX End of buffer int status */ +#define MAL0_RXDEIR (MAL_DCR_BASE + 0x13) /* RX Descr. Error Int */ +#define MAL0_RXBADDR (MAL_DCR_BASE + 0x15) /* RX descriptor base addr */ +#define MAL0_TXCTP0R (MAL_DCR_BASE + 0x20) /* TX 0 Channel table pointer */ +#define MAL0_TXCTP1R (MAL_DCR_BASE + 0x21) /* TX 1 Channel table pointer */ +#define MAL0_TXCTP2R (MAL_DCR_BASE + 0x22) /* TX 2 Channel table pointer */ +#define MAL0_TXCTP3R (MAL_DCR_BASE + 0x23) /* TX 3 Channel table pointer */ +#define MAL0_RXCTP0R (MAL_DCR_BASE + 0x40) /* RX 0 Channel table pointer */ +#define MAL0_RXCTP1R (MAL_DCR_BASE + 0x41) /* RX 1 Channel table pointer */ +#define MAL0_RCBS0 (MAL_DCR_BASE + 0x60) /* RX 0 Channel buffer size */ +#define MAL0_RCBS1 (MAL_DCR_BASE + 0x61) /* RX 1 Channel buffer size */ #if defined(CONFIG_440GX) || \ defined(CONFIG_460EX) || defined(CONFIG_460GT) -#define malrxctp2r (MAL_DCR_BASE+0x42) /* RX 2 Channel table pointer reg */ -#define malrxctp3r (MAL_DCR_BASE+0x43) /* RX 3 Channel table pointer reg */ -#define malrxctp8r (MAL_DCR_BASE+0x48) /* RX 8 Channel table pointer reg */ -#define malrxctp16r (MAL_DCR_BASE+0x50) /* RX 16 Channel table pointer reg */ -#define malrxctp24r (MAL_DCR_BASE+0x58) /* RX 24 Channel table pointer reg */ -#define malrcbs2 (MAL_DCR_BASE+0x62) /* RX 2 Channel buffer size reg */ -#define malrcbs3 (MAL_DCR_BASE+0x63) /* RX 3 Channel buffer size reg */ -#define malrcbs8 (MAL_DCR_BASE+0x68) /* RX 8 Channel buffer size reg */ -#define malrcbs16 (MAL_DCR_BASE+0x70) /* RX 16 Channel buffer size reg */ -#define malrcbs24 (MAL_DCR_BASE+0x78) /* RX 24 Channel buffer size reg */ +#define MAL0_RXCTP2R (MAL_DCR_BASE + 0x42) /* RX 2 Channel table pointer */ +#define MAL0_RXCTP3R (MAL_DCR_BASE + 0x43) /* RX 3 Channel table pointer */ +#define MAL0_RXCTP8R (MAL_DCR_BASE + 0x48) /* RX 8 Channel table pointer */ +#define MAL0_RXCTP16R (MAL_DCR_BASE + 0x50) /* RX 16 Channel table pointer*/ +#define MAL0_RXCTP24R (MAL_DCR_BASE + 0x58) /* RX 24 Channel table pointer*/ +#define MAL0_RCBS2 (MAL_DCR_BASE + 0x62) /* RX 2 Channel buffer size */ +#define MAL0_RCBS3 (MAL_DCR_BASE + 0x63) /* RX 3 Channel buffer size */ +#define MAL0_RCBS8 (MAL_DCR_BASE + 0x68) /* RX 8 Channel buffer size */ +#define MAL0_RCBS16 (MAL_DCR_BASE + 0x70) /* RX 16 Channel buffer size */ +#define MAL0_RCBS24 (MAL_DCR_BASE + 0x78) /* RX 24 Channel buffer size */ #endif /* CONFIG_440GX */ /*-----------------------------------------------------------------------------+ | SDR0 Bit Settings +-----------------------------------------------------------------------------*/ #if defined(CONFIG_440SP) -#define SDR0_SRST 0x0200 - #define SDR0_DDR0 0x00E1 #define SDR0_DDR0_DPLLRST 0x80000000 #define SDR0_DDR0_DDRM_MASK 0x60000000 @@ -923,79 +839,6 @@ #define SDR0_UART0 0x0120 #define SDR0_UART1 0x0121 #define SDR0_UART2 0x0122 -#define SDR0_UARTX_UXICS_MASK 0xF0000000 -#define SDR0_UARTX_UXICS_PLB 0x20000000 -#define SDR0_UARTX_UXEC_MASK 0x00800000 -#define SDR0_UARTX_UXEC_INT 0x00000000 -#define SDR0_UARTX_UXEC_EXT 0x00800000 -#define SDR0_UARTX_UXDIV_MASK 0x000000FF -#define SDR0_UARTX_UXDIV_ENCODE(n) ((((unsigned long)(n))&0xFF)<<0) -#define SDR0_UARTX_UXDIV_DECODE(n) ((((((unsigned long)(n))>>0)-1)&0xFF)+1) - -#define SDR0_CP440 0x0180 -#define SDR0_CP440_ERPN_MASK 0x30000000 -#define SDR0_CP440_ERPN_MASK_HI 0x3000 -#define SDR0_CP440_ERPN_MASK_LO 0x0000 -#define SDR0_CP440_ERPN_EBC 0x10000000 -#define SDR0_CP440_ERPN_EBC_HI 0x1000 -#define SDR0_CP440_ERPN_EBC_LO 0x0000 -#define SDR0_CP440_ERPN_PCI 0x20000000 -#define SDR0_CP440_ERPN_PCI_HI 0x2000 -#define SDR0_CP440_ERPN_PCI_LO 0x0000 -#define SDR0_CP440_ERPN_ENCODE(n) ((((unsigned long)(n))&0x03)<<28) -#define SDR0_CP440_ERPN_DECODE(n) ((((unsigned long)(n))>>28)&0x03) -#define SDR0_CP440_NTO1_MASK 0x00000002 -#define SDR0_CP440_NTO1_NTOP 0x00000000 -#define SDR0_CP440_NTO1_NTO1 0x00000002 -#define SDR0_CP440_NTO1_ENCODE(n) ((((unsigned long)(n))&0x01)<<1) -#define SDR0_CP440_NTO1_DECODE(n) ((((unsigned long)(n))>>1)&0x01) - -#define SDR0_XCR0 0x01C0 -#define SDR0_XCR1 0x01C3 -#define SDR0_XCR2 0x01C6 -#define SDR0_XCRn_PAE_MASK 0x80000000 -#define SDR0_XCRn_PAE_DISABLE 0x00000000 -#define SDR0_XCRn_PAE_ENABLE 0x80000000 -#define SDR0_XCRn_PAE_ENCODE(n) ((((unsigned long)(n))&0x01)<<31) -#define SDR0_XCRn_PAE_DECODE(n) ((((unsigned long)(n))>>31)&0x01) -#define SDR0_XCRn_PHCE_MASK 0x40000000 -#define SDR0_XCRn_PHCE_DISABLE 0x00000000 -#define SDR0_XCRn_PHCE_ENABLE 0x40000000 -#define SDR0_XCRn_PHCE_ENCODE(n) ((((unsigned long)(n))&0x01)<<30) -#define SDR0_XCRn_PHCE_DECODE(n) ((((unsigned long)(n))>>30)&0x01) -#define SDR0_XCRn_PISE_MASK 0x20000000 -#define SDR0_XCRn_PISE_DISABLE 0x00000000 -#define SDR0_XCRn_PISE_ENABLE 0x20000000 -#define SDR0_XCRn_PISE_ENCODE(n) ((((unsigned long)(n))&0x01)<<29) -#define SDR0_XCRn_PISE_DECODE(n) ((((unsigned long)(n))>>29)&0x01) -#define SDR0_XCRn_PCWE_MASK 0x10000000 -#define SDR0_XCRn_PCWE_DISABLE 0x00000000 -#define SDR0_XCRn_PCWE_ENABLE 0x10000000 -#define SDR0_XCRn_PCWE_ENCODE(n) ((((unsigned long)(n))&0x01)<<28) -#define SDR0_XCRn_PCWE_DECODE(n) ((((unsigned long)(n))>>28)&0x01) -#define SDR0_XCRn_PPIM_MASK 0x0F000000 -#define SDR0_XCRn_PPIM_ENCODE(n) ((((unsigned long)(n))&0x0F)<<24) -#define SDR0_XCRn_PPIM_DECODE(n) ((((unsigned long)(n))>>24)&0x0F) -#define SDR0_XCRn_PR64E_MASK 0x00800000 -#define SDR0_XCRn_PR64E_DISABLE 0x00000000 -#define SDR0_XCRn_PR64E_ENABLE 0x00800000 -#define SDR0_XCRn_PR64E_ENCODE(n) ((((unsigned long)(n))&0x01)<<23) -#define SDR0_XCRn_PR64E_DECODE(n) ((((unsigned long)(n))>>23)&0x01) -#define SDR0_XCRn_PXFS_MASK 0x00600000 -#define SDR0_XCRn_PXFS_100_133 0x00000000 -#define SDR0_XCRn_PXFS_66_100 0x00200000 -#define SDR0_XCRn_PXFS_50_66 0x00400000 -#define SDR0_XCRn_PXFS_0_33 0x00600000 -#define SDR0_XCRn_PXFS_ENCODE(n) ((((unsigned long)(n))&0x03)<<21) -#define SDR0_XCRn_PXFS_DECODE(n) ((((unsigned long)(n))>>21)&0x03) - -#define SDR0_XPLLC0 0x01C1 -#define SDR0_XPLLD0 0x01C2 -#define SDR0_XPLLC1 0x01C4 -#define SDR0_XPLLD1 0x01C5 -#define SDR0_XPLLC2 0x01C7 -#define SDR0_XPLLD2 0x01C8 -#define SDR0_SRST 0x0200 #define SDR0_SLPIPE 0x0220 #define SDR0_AMP0 0x0240 @@ -1544,8 +1387,7 @@ #elif defined(CONFIG_460EX) || defined(CONFIG_460GT) -#define SDR0_SRST0 0x0200 -#define SDR0_SRST SDR0_SRST0 /* for compatability reasons */ +#define SDR0_SRST0 SDR0_SRST /* for compatability reasons */ #define SDR0_SRST0_BGO 0x80000000 /* PLB to OPB bridge */ #define SDR0_SRST0_PLB4 0x40000000 /* PLB4 arbiter */ #define SDR0_SRST0_EBC 0x20000000 /* External bus controller */ @@ -1607,8 +1449,6 @@ #define SDR0_SRST1_AHBICM 0x00000002 /* AHB inter-connect matrix */ #define SDR0_SRST1_SATA 0x00000001 /* Serial ATA controller */ -#define SDR0_PCI0 0x1c0 /* PCI Configuration Register */ - #else #define SDR0_SRST_BGO 0x80000000 diff --git a/include/ppc4xx.h b/include/ppc4xx.h index a9954aa3d..086f8fb7e 100644 --- a/include/ppc4xx.h +++ b/include/ppc4xx.h @@ -65,49 +65,37 @@ #define PLB_ARBITER_BASE 0x80 -#define plb0_revid (PLB_ARBITER_BASE + 0x00) -#define plb0_acr (PLB_ARBITER_BASE + 0x01) -#define plb0_acr_ppm_mask 0xF0000000 -#define plb0_acr_ppm_fixed 0x00000000 -#define plb0_acr_ppm_fair 0xD0000000 -#define plb0_acr_hbu_mask 0x08000000 -#define plb0_acr_hbu_disabled 0x00000000 -#define plb0_acr_hbu_enabled 0x08000000 -#define plb0_acr_rdp_mask 0x06000000 -#define plb0_acr_rdp_disabled 0x00000000 -#define plb0_acr_rdp_2deep 0x02000000 -#define plb0_acr_rdp_3deep 0x04000000 -#define plb0_acr_rdp_4deep 0x06000000 -#define plb0_acr_wrp_mask 0x01000000 -#define plb0_acr_wrp_disabled 0x00000000 -#define plb0_acr_wrp_2deep 0x01000000 - -#define plb0_besrl (PLB_ARBITER_BASE + 0x02) -#define plb0_besrh (PLB_ARBITER_BASE + 0x03) -#define plb0_bearl (PLB_ARBITER_BASE + 0x04) -#define plb0_bearh (PLB_ARBITER_BASE + 0x05) -#define plb0_ccr (PLB_ARBITER_BASE + 0x08) - -#define plb1_acr (PLB_ARBITER_BASE + 0x09) -#define plb1_acr_ppm_mask 0xF0000000 -#define plb1_acr_ppm_fixed 0x00000000 -#define plb1_acr_ppm_fair 0xD0000000 -#define plb1_acr_hbu_mask 0x08000000 -#define plb1_acr_hbu_disabled 0x00000000 -#define plb1_acr_hbu_enabled 0x08000000 -#define plb1_acr_rdp_mask 0x06000000 -#define plb1_acr_rdp_disabled 0x00000000 -#define plb1_acr_rdp_2deep 0x02000000 -#define plb1_acr_rdp_3deep 0x04000000 -#define plb1_acr_rdp_4deep 0x06000000 -#define plb1_acr_wrp_mask 0x01000000 -#define plb1_acr_wrp_disabled 0x00000000 -#define plb1_acr_wrp_2deep 0x01000000 - -#define plb1_besrl (PLB_ARBITER_BASE + 0x0A) -#define plb1_besrh (PLB_ARBITER_BASE + 0x0B) -#define plb1_bearl (PLB_ARBITER_BASE + 0x0C) -#define plb1_bearh (PLB_ARBITER_BASE + 0x0D) +#define PLB0_ACR (PLB_ARBITER_BASE + 0x01) +#define PLB0_ACR_PPM_MASK 0xF0000000 +#define PLB0_ACR_PPM_FIXED 0x00000000 +#define PLB0_ACR_PPM_FAIR 0xD0000000 +#define PLB0_ACR_HBU_MASK 0x08000000 +#define PLB0_ACR_HBU_DISABLED 0x00000000 +#define PLB0_ACR_HBU_ENABLED 0x08000000 +#define PLB0_ACR_RDP_MASK 0x06000000 +#define PLB0_ACR_RDP_DISABLED 0x00000000 +#define PLB0_ACR_RDP_2DEEP 0x02000000 +#define PLB0_ACR_RDP_3DEEP 0x04000000 +#define PLB0_ACR_RDP_4DEEP 0x06000000 +#define PLB0_ACR_WRP_MASK 0x01000000 +#define PLB0_ACR_WRP_DISABLED 0x00000000 +#define PLB0_ACR_WRP_2DEEP 0x01000000 + +#define PLB1_ACR (PLB_ARBITER_BASE + 0x09) +#define PLB1_ACR_PPM_MASK 0xF0000000 +#define PLB1_ACR_PPM_FIXED 0x00000000 +#define PLB1_ACR_PPM_FAIR 0xD0000000 +#define PLB1_ACR_HBU_MASK 0x08000000 +#define PLB1_ACR_HBU_DISABLED 0x00000000 +#define PLB1_ACR_HBU_ENABLED 0x08000000 +#define PLB1_ACR_RDP_MASK 0x06000000 +#define PLB1_ACR_RDP_DISABLED 0x00000000 +#define PLB1_ACR_RDP_2DEEP 0x02000000 +#define PLB1_ACR_RDP_3DEEP 0x04000000 +#define PLB1_ACR_RDP_4DEEP 0x06000000 +#define PLB1_ACR_WRP_MASK 0x01000000 +#define PLB1_ACR_WRP_DISABLED 0x00000000 +#define PLB1_ACR_WRP_2DEEP 0x01000000 #endif /* 440EP/EPX 440GR/GRX 440SP/SPE 460EX/GT/SX 405EX*/ @@ -156,35 +144,35 @@ line aligned data. */ #define CPR0_DCR_BASE 0x0C -#define cprcfga (CPR0_DCR_BASE+0x0) -#define cprcfgd (CPR0_DCR_BASE+0x1) +#define CPR0_CFGADDR (CPR0_DCR_BASE + 0x0) +#define CPR0_CFGDATA (CPR0_DCR_BASE + 0x1) #define SDR_DCR_BASE 0x0E -#define sdrcfga (SDR_DCR_BASE+0x0) -#define sdrcfgd (SDR_DCR_BASE+0x1) +#define SDR0_CFGADDR (SDR_DCR_BASE + 0x0) +#define SDR0_CFGDATA (SDR_DCR_BASE + 0x1) #define SDRAM_DCR_BASE 0x10 -#define memcfga (SDRAM_DCR_BASE+0x0) -#define memcfgd (SDRAM_DCR_BASE+0x1) +#define SDRAM0_CFGADDR (SDRAM_DCR_BASE + 0x0) +#define SDRAM0_CFGDATA (SDRAM_DCR_BASE + 0x1) #define EBC_DCR_BASE 0x12 -#define ebccfga (EBC_DCR_BASE+0x0) -#define ebccfgd (EBC_DCR_BASE+0x1) +#define EBC0_CFGADDR (EBC_DCR_BASE + 0x0) +#define EBC0_CFGDATA (EBC_DCR_BASE + 0x1) /* * Macros for indirect DCR access */ -#define mtcpr(reg, d) do { mtdcr(cprcfga,reg);mtdcr(cprcfgd,d); } while (0) -#define mfcpr(reg, d) do { mtdcr(cprcfga,reg);d = mfdcr(cprcfgd); } while (0) +#define mtcpr(reg, d) do { mtdcr(CPR0_CFGADDR,reg);mtdcr(CPR0_CFGDATA,d); } while (0) +#define mfcpr(reg, d) do { mtdcr(CPR0_CFGADDR,reg);d = mfdcr(CPR0_CFGDATA); } while (0) -#define mtebc(reg, d) do { mtdcr(ebccfga,reg);mtdcr(ebccfgd,d); } while (0) -#define mfebc(reg, d) do { mtdcr(ebccfga,reg);d = mfdcr(ebccfgd); } while (0) +#define mtebc(reg, d) do { mtdcr(EBC0_CFGADDR,reg);mtdcr(EBC0_CFGDATA,d); } while (0) +#define mfebc(reg, d) do { mtdcr(EBC0_CFGADDR,reg);d = mfdcr(EBC0_CFGDATA); } while (0) -#define mtsdram(reg, d) do { mtdcr(memcfga,reg);mtdcr(memcfgd,d); } while (0) -#define mfsdram(reg, d) do { mtdcr(memcfga,reg);d = mfdcr(memcfgd); } while (0) +#define mtsdram(reg, d) do { mtdcr(SDRAM0_CFGADDR,reg);mtdcr(SDRAM0_CFGDATA,d); } while (0) +#define mfsdram(reg, d) do { mtdcr(SDRAM0_CFGADDR,reg);d = mfdcr(SDRAM0_CFGDATA); } while (0) -#define mtsdr(reg, d) do { mtdcr(sdrcfga,reg);mtdcr(sdrcfgd,d); } while (0) -#define mfsdr(reg, d) do { mtdcr(sdrcfga,reg);d = mfdcr(sdrcfgd); } while (0) +#define mtsdr(reg, d) do { mtdcr(SDR0_CFGADDR,reg);mtdcr(SDR0_CFGDATA,d); } while (0) +#define mfsdr(reg, d) do { mtdcr(SDR0_CFGADDR,reg);d = mfdcr(SDR0_CFGDATA); } while (0) #ifndef __ASSEMBLY__ @@ -10,12 +10,14 @@ APPEND=no # Default: Create new config file BOARD_NAME="" # Name to print in make output +TARGETS="" while [ $# -gt 0 ] ; do case "$1" in --) shift ; break ;; -a) shift ; APPEND=yes ;; -n) shift ; BOARD_NAME="${1%%_config}" ; shift ;; + -t) shift ; TARGETS="`echo $1 | sed 's:_: :g'` ${TARGETS}" ; shift ;; *) break ;; esac done @@ -82,7 +84,11 @@ else > config.h # Create new config file fi echo "/* Automatically generated - do not edit */" >>config.h -echo "#define CONFIG_MK_${BOARD_NAME} 1" >>config.h + +for i in ${TARGETS} ; do + echo "#define CONFIG_MK_${i} 1" >>config.h ; +done + echo "#include <configs/$1.h>" >>config.h echo "#include <asm/config.h>" >>config.h diff --git a/nand_spl/board/amcc/bamboo/sdram.c b/nand_spl/board/amcc/bamboo/sdram.c index 54be2566c..df03afe0a 100644 --- a/nand_spl/board/amcc/bamboo/sdram.c +++ b/nand_spl/board/amcc/bamboo/sdram.c @@ -56,8 +56,8 @@ phys_size_t initdram(int board_type) /* * Soft-reset SDRAM controller. */ - mtsdr(sdr_srst, SDR0_SRST_DMC); - mtsdr(sdr_srst, 0x00000000); + mtsdr(SDR0_SRST, SDR0_SRST_DMC); + mtsdr(SDR0_SRST, 0x00000000); /* * Disable memory controller. diff --git a/post/cpu/ppc4xx/ether.c b/post/cpu/ppc4xx/ether.c index e40e19be2..c3665da94 100644 --- a/post/cpu/ppc4xx/ether.c +++ b/post/cpu/ppc4xx/ether.c @@ -109,9 +109,9 @@ static void ether_post_init (int devnum, int hw_addr) #if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX) /* provide clocks for EMAC internal loopback */ - mfsdr (sdr_mfr, mfr); + mfsdr (SDR0_MFR, mfr); mfr |= SDR0_MFR_ETH_CLK_SEL_V(devnum); - mtsdr (sdr_mfr, mfr); + mtsdr (SDR0_MFR, mfr); sync (); #endif /* reset emac */ @@ -150,13 +150,13 @@ static void ether_post_init (int devnum, int hw_addr) #if defined(CONFIG_440GX) || \ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ defined(CONFIG_440SP) || defined(CONFIG_440SPE) - mtdcr (malmcr, MAL_CR_PLBB | MAL_CR_OPBBL | MAL_CR_LEA | + mtdcr (MAL0_CFG, MAL_CR_PLBB | MAL_CR_OPBBL | MAL_CR_LEA | MAL_CR_PLBLT_DEFAULT | 0x00330000); #else - mtdcr (malmcr, MAL_CR_PLBB | MAL_CR_OPBBL | MAL_CR_LEA | MAL_CR_PLBLT_DEFAULT); + mtdcr (MAL0_CFG, MAL_CR_PLBB | MAL_CR_OPBBL | MAL_CR_LEA | MAL_CR_PLBLT_DEFAULT); /* Errata 1.12: MAL_1 -- Disable MAL bursting */ if (get_pvr() == PVR_440GP_RB) { - mtdcr (malmcr, mfdcr(malmcr) & ~MAL_CR_PLBB); + mtdcr (MAL0_CFG, mfdcr(MAL0_CFG) & ~MAL_CR_PLBB); } #endif /* setup buffer descriptors */ @@ -174,39 +174,39 @@ static void ether_post_init (int devnum, int hw_addr) case 1: /* setup MAL tx & rx channel pointers */ #if defined (CONFIG_405EP) || defined (CONFIG_440EP) || defined (CONFIG_440GR) - mtdcr (maltxctp2r, &tx); + mtdcr (MAL0_TXCTP2R, &tx); #else - mtdcr (maltxctp1r, &tx); + mtdcr (MAL0_TXCTP1R, &tx); #endif #if defined(CONFIG_440) - mtdcr (maltxbattr, 0x0); - mtdcr (malrxbattr, 0x0); + mtdcr (MAL0_TXBADDR, 0x0); + mtdcr (MAL0_RXBADDR, 0x0); #endif - mtdcr (malrxctp1r, &rx); + mtdcr (MAL0_RXCTP1R, &rx); /* set RX buffer size */ - mtdcr (malrcbs1, PKTSIZE_ALIGN / 16); + mtdcr (MAL0_RCBS1, PKTSIZE_ALIGN / 16); break; case 0: default: /* setup MAL tx & rx channel pointers */ #if defined(CONFIG_440) - mtdcr (maltxbattr, 0x0); - mtdcr (malrxbattr, 0x0); + mtdcr (MAL0_TXBADDR, 0x0); + mtdcr (MAL0_RXBADDR, 0x0); #endif - mtdcr (maltxctp0r, &tx); - mtdcr (malrxctp0r, &rx); + mtdcr (MAL0_TXCTP0R, &tx); + mtdcr (MAL0_RXCTP0R, &rx); /* set RX buffer size */ - mtdcr (malrcbs0, PKTSIZE_ALIGN / 16); + mtdcr (MAL0_RCBS0, PKTSIZE_ALIGN / 16); break; } /* Enable MAL transmit and receive channels */ #if defined(CONFIG_405EP) || defined(CONFIG_440EP) || defined(CONFIG_440GR) - mtdcr (maltxcasr, (MAL_TXRX_CASR >> (devnum*2))); + mtdcr (MAL0_TXCASR, (MAL_TXRX_CASR >> (devnum*2))); #else - mtdcr (maltxcasr, (MAL_TXRX_CASR >> devnum)); + mtdcr (MAL0_TXCASR, (MAL_TXRX_CASR >> devnum)); #endif - mtdcr (malrxcasr, (MAL_TXRX_CASR >> devnum)); + mtdcr (MAL0_RXCASR, (MAL_TXRX_CASR >> devnum)); /* set internal loopback mode */ #ifdef CONFIG_SYS_POST_ETHER_EXT_LOOPBACK @@ -257,14 +257,14 @@ static void ether_post_halt (int devnum, int hw_addr) /* 1st reset MAL channel */ /* Note: writing a 0 to a channel has no effect */ #if defined(CONFIG_405EP) || defined(CONFIG_440EP) || defined(CONFIG_440GR) - mtdcr (maltxcarr, MAL_TXRX_CASR >> (devnum * 2)); + mtdcr (MAL0_TXCARR, MAL_TXRX_CASR >> (devnum * 2)); #else - mtdcr (maltxcarr, MAL_TXRX_CASR >> devnum); + mtdcr (MAL0_TXCARR, MAL_TXRX_CASR >> devnum); #endif - mtdcr (malrxcarr, MAL_TXRX_CASR >> devnum); + mtdcr (MAL0_RXCARR, MAL_TXRX_CASR >> devnum); /* wait for reset */ - while (mfdcr (malrxcasr) & (MAL_TXRX_CASR >> devnum)) { + while (mfdcr (MAL0_RXCASR) & (MAL_TXRX_CASR >> devnum)) { if (i++ >= 1000) break; udelay (1000); @@ -274,9 +274,9 @@ static void ether_post_halt (int devnum, int hw_addr) #if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX) /* remove clocks for EMAC internal loopback */ - mfsdr (sdr_mfr, mfr); + mfsdr (SDR0_MFR, mfr); mfr &= ~SDR0_MFR_ETH_CLK_SEL_V(devnum); - mtsdr (sdr_mfr, mfr); + mtsdr (SDR0_MFR, mfr); #endif } diff --git a/post/cpu/ppc4xx/uart.c b/post/cpu/ppc4xx/uart.c index 84a4d0a0d..be217fcf8 100644 --- a/post/cpu/ppc4xx/uart.c +++ b/post/cpu/ppc4xx/uart.c @@ -68,7 +68,7 @@ #define CR0_EXTCLK_ENA 0x00600000 #define CR0_UDIV_POS 16 #define UDIV_SUBTRACT 1 -#define UART0_SDR cntrl0 +#define UART0_SDR CPC0_CR0 #define MFREG(a, d) d = mfdcr(a) #define MTREG(a, d) mtdcr(a, d) #else /* #if defined(CONFIG_440GP) */ @@ -77,16 +77,16 @@ #define CR0_EXTCLK_ENA 0x00800000 #define CR0_UDIV_POS 0 #define UDIV_SUBTRACT 0 -#define UART0_SDR sdr_uart0 -#define UART1_SDR sdr_uart1 +#define UART0_SDR SDR0_UART0 +#define UART1_SDR SDR0_UART1 #if defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \ defined(CONFIG_440GR) || defined(CONFIG_440GRX) || \ defined(CONFIG_440SP) || defined(CONFIG_440SPE) -#define UART2_SDR sdr_uart2 +#define UART2_SDR SDR0_UART2 #endif #if defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \ defined(CONFIG_440GR) || defined(CONFIG_440GRX) -#define UART3_SDR sdr_uart3 +#define UART3_SDR SDR0_UART3 #endif #define MFREG(a, d) mfsdr(a, d) #define MTREG(a, d) mtsdr(a, d) @@ -106,8 +106,8 @@ #define CR0_EXTCLK_ENA 0x00800000 #define CR0_UDIV_POS 0 #define UDIV_SUBTRACT 0 -#define UART0_SDR sdr_uart0 -#define UART1_SDR sdr_uart1 +#define UART0_SDR SDR0_UART0 +#define UART1_SDR SDR0_UART1 #define MFREG(a, d) mfsdr(a, d) #define MTREG(a, d) mtsdr(a, d) #else /* CONFIG_405GP || CONFIG_405CR */ @@ -276,7 +276,7 @@ static int uart_post_init (unsigned long dev_base) clk = tmp = reg = 0; #else #ifdef CONFIG_405EP - reg = mfdcr(cpc0_ucr) & ~(UCR0_MASK | UCR1_MASK); + reg = mfdcr(CPC0_UCR) & ~(UCR0_MASK | UCR1_MASK); clk = gd->cpu_clk; tmp = CONFIG_SYS_BASE_BAUD * 16; udiv = (clk + tmp / 2) / tmp; @@ -284,9 +284,9 @@ static int uart_post_init (unsigned long dev_base) udiv = UDIV_MAX; reg |= (udiv) << UCR0_UDIV_POS; /* set the UART divisor */ reg |= (udiv) << UCR1_UDIV_POS; /* set the UART divisor */ - mtdcr (cpc0_ucr, reg); + mtdcr (CPC0_UCR, reg); #else /* CONFIG_405EP */ - reg = mfdcr(cntrl0) & ~CR0_MASK; + reg = mfdcr(CPC0_CR0) & ~CR0_MASK; #ifdef CONFIG_SYS_EXT_SERIAL_CLOCK clk = CONFIG_SYS_EXT_SERIAL_CLOCK; udiv = 1; @@ -303,7 +303,7 @@ static int uart_post_init (unsigned long dev_base) #endif #endif reg |= (udiv - 1) << CR0_UDIV_POS; /* set the UART divisor */ - mtdcr (cntrl0, reg); + mtdcr (CPC0_CR0, reg); #endif /* CONFIG_405EP */ tmp = gd->baudrate * udiv * 16; bdiv = (clk + tmp / 2) / tmp; diff --git a/tools/netconsole b/tools/netconsole index 09c898168..c8109bb09 100755 --- a/tools/netconsole +++ b/tools/netconsole @@ -31,12 +31,29 @@ if [ -z "${ip}" ] || [ -n "$3" ] ; then fi for nc in netcat nc ; do - type ${nc} >/dev/null && break + type ${nc} >/dev/null 2>&1 && break done trap "stty icanon echo intr ^C" 0 2 3 5 10 13 15 echo "NOTE: the interrupt signal (normally ^C) has been remapped to ^T" stty -icanon -echo intr ^T -${nc} -u -l -p ${port} < /dev/null & -exec ${nc} -u ${ip} ${port} +( +if type ncb 2>/dev/null ; then + # see if ncb is in $PATH + exec ncb ${port} + +elif [ -x ${0%/*}/ncb ] ; then + # maybe it's in the same dir as the netconsole script + exec ${0%/*}/ncb ${port} + +else + # blah, just use regular netcat + while ${nc} -u -l -p ${port} < /dev/null ; do + : + done +fi +) & +pid=$! +${nc} -u ${ip} ${port} +kill ${pid} 2>/dev/null |