1 files changed, 254 insertions, 0 deletions
diff --git a/cpu/arm_cortexa8/omap3/sys_info.c b/cpu/arm_cortexa8/omap3/sys_info.c
new file mode 100644
index 000000000..ab012b6a9
--- /dev/null
+++ b/cpu/arm_cortexa8/omap3/sys_info.c
@@ -0,0 +1,254 @@
+/*
+ * (C) Copyright 2008
+ * Texas Instruments, <www.ti.com>
+ *
+ * Author :
+ *      Manikandan Pillai <mani.pillai@ti.com>
+ *
+ * Derived from Beagle Board and 3430 SDP code by
+ *      Richard Woodruff <r-woodruff2@ti.com>
+ *      Syed Mohammed Khasim <khasim@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/mem.h>	/* get mem tables */
+#include <asm/arch/sys_proto.h>
+#include <i2c.h>
+
+extern omap3_sysinfo sysinfo;
+static gpmc_csx_t *gpmc_cs_base = (gpmc_csx_t *)GPMC_CONFIG_CS0_BASE;
+static sdrc_t *sdrc_base = (sdrc_t *)OMAP34XX_SDRC_BASE;
+static ctrl_t *ctrl_base = (ctrl_t *)OMAP34XX_CTRL_BASE;
+
+/******************************************
+ * get_cpu_rev(void) - extract version info
+ ******************************************/
+u32 get_cpu_rev(void)
+{
+	u32 cpuid = 0;
+
+	/*
+	 * On ES1.0 the IDCODE register is not exposed on L4
+	 * so using CPU ID to differentiate
+	 * between ES2.0 and ES1.0.
+	 */
+	__asm__ __volatile__("mrc p15, 0, %0, c0, c0, 0":"=r"(cpuid));
+	if ((cpuid & 0xf) == 0x0)
+		return CPU_3430_ES1;
+	else
+		return CPU_3430_ES2;
+
+}
+
+/****************************************************
+ * is_mem_sdr() - return 1 if mem type in use is SDR
+ ****************************************************/
+u32 is_mem_sdr(void)
+{
+	if (readl(&sdrc_base->cs[CS0].mr) == SDP_SDRC_MR_0_SDR)
+		return 1;
+	return 0;
+}
+
+/***********************************************************************
+ * get_cs0_size() - get size of chip select 0/1
+ ************************************************************************/
+u32 get_sdr_cs_size(u32 cs)
+{
+	u32 size;
+
+	/* get ram size field */
+	size = readl(&sdrc_base->cs[cs].mcfg) >> 8;
+	size &= 0x3FF;		/* remove unwanted bits */
+	size *= SZ_2M;		/* find size in MB */
+	return size;
+}
+
+/***********************************************************************
+ * get_sdr_cs_offset() - get offset of cs from cs0 start
+ ************************************************************************/
+u32 get_sdr_cs_offset(u32 cs)
+{
+	u32 offset;
+
+	if (!cs)
+		return 0;
+
+	offset = readl(&sdrc_base->cs_cfg);
+	offset = (offset & 15) << 27 | (offset & 0x30) >> 17;
+
+	return offset;
+}
+
+/***********************************************************************
+ * get_board_type() - get board type based on current production stats.
+ *  - NOTE-1-: 2 I2C EEPROMs will someday be populated with proper info.
+ *    when they are available we can get info from there.  This should
+ *    be correct of all known boards up until today.
+ *  - NOTE-2- EEPROMs are populated but they are updated very slowly.  To
+ *    avoid waiting on them we will use ES version of the chip to get info.
+ *    A later version of the FPGA migth solve their speed issue.
+ ************************************************************************/
+u32 get_board_type(void)
+{
+	if (get_cpu_rev() == CPU_3430_ES2)
+		return sysinfo.board_type_v2;
+	else
+		return sysinfo.board_type_v1;
+}
+
+/***************************************************************************
+ *  get_gpmc0_base() - Return current address hardware will be
+ *     fetching from. The below effectively gives what is correct, its a bit
+ *   mis-leading compared to the TRM.  For the most general case the mask
+ *   needs to be also taken into account this does work in practice.
+ *   - for u-boot we currently map:
+ *       -- 0 to nothing,
+ *       -- 4 to flash
+ *       -- 8 to enent
+ *       -- c to wifi
+ ****************************************************************************/
+u32 get_gpmc0_base(void)
+{
+	u32 b;
+
+	b = readl(&gpmc_cs_base->config7);
+	b &= 0x1F;		/* keep base [5:0] */
+	b = b << 24;		/* ret 0x0b000000 */
+	return b;
+}
+
+/*******************************************************************
+ * get_gpmc0_width() - See if bus is in x8 or x16 (mainly for nand)
+ *******************************************************************/
+u32 get_gpmc0_width(void)
+{
+	return WIDTH_16BIT;
+}
+
+/*************************************************************************
+ * get_board_rev() - setup to pass kernel board revision information
+ * returns:(bit[0-3] sub version, higher bit[7-4] is higher version)
+ *************************************************************************/
+u32 get_board_rev(void)
+{
+	return 0x20;
+}
+
+/*********************************************************************
+ *  display_board_info() - print banner with board info.
+ *********************************************************************/
+void display_board_info(u32 btype)
+{
+	char *mem_s, *sec_s;
+
+	if (is_mem_sdr())
+		mem_s = "mSDR";
+	else
+		mem_s = "LPDDR";
+
+	switch (get_device_type()) {
+	case TST_DEVICE:
+		sec_s = "TST";
+		break;
+	case EMU_DEVICE:
+		sec_s = "EMU";
+		break;
+	case HS_DEVICE:
+		sec_s = "HS";
+		break;
+	case GP_DEVICE:
+		sec_s = "GP";
+		break;
+	default:
+		sec_s = "?";
+	}
+
+	printf("OMAP%s-%s rev %d, CPU-OPP2 L3-165MHz\n", sysinfo.cpu_string,
+	       sec_s, get_cpu_rev());
+	printf("%s + %s/%s\n", sysinfo.board_string,
+	       mem_s, sysinfo.nand_string);
+
+}
+
+/********************************************************
+ *  get_base(); get upper addr of current execution
+ *******************************************************/
+u32 get_base(void)
+{
+	u32 val;
+
+	__asm__ __volatile__("mov %0, pc \n":"=r"(val)::"memory");
+	val &= 0xF0000000;
+	val >>= 28;
+	return val;
+}
+
+/********************************************************
+ *  is_running_in_flash() - tell if currently running in
+ *  FLASH.
+ *******************************************************/
+u32 is_running_in_flash(void)
+{
+	if (get_base() < 4)
+		return 1;	/* in FLASH */
+
+	return 0;		/* running in SRAM or SDRAM */
+}
+
+/********************************************************
+ *  is_running_in_sram() - tell if currently running in
+ *  SRAM.
+ *******************************************************/
+u32 is_running_in_sram(void)
+{
+	if (get_base() == 4)
+		return 1;	/* in SRAM */
+
+	return 0;		/* running in FLASH or SDRAM */
+}
+
+/********************************************************
+ *  is_running_in_sdram() - tell if currently running in
+ *  SDRAM.
+ *******************************************************/
+u32 is_running_in_sdram(void)
+{
+	if (get_base() > 4)
+		return 1;	/* in SDRAM */
+
+	return 0;		/* running in SRAM or FLASH */
+}
+
+/***************************************************************
+ *  get_boot_type() - Is this an XIP type device or a stream one
+ *  bits 4-0 specify type. Bit 5 says mem/perif
+ ***************************************************************/
+u32 get_boot_type(void)
+{
+	return (readl(&ctrl_base->status) & SYSBOOT_MASK);
+}
+
+/*************************************************************
+ *  get_device_type(): tell if GP/HS/EMU/TST
+ *************************************************************/
+u32 get_device_type(void)
+{
+	return ((readl(&ctrl_base->status) & (DEVICE_MASK)) >> 8);
+}