diff options
Diffstat (limited to 'cpu/mpc83xx/cpu.c')
| -rw-r--r-- | cpu/mpc83xx/cpu.c | 81 |
1 files changed, 78 insertions, 3 deletions
diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c index 8d543d5c9..4e82a8b78 100644 --- a/cpu/mpc83xx/cpu.c +++ b/cpu/mpc83xx/cpu.c @@ -69,9 +69,72 @@ int checkcpu(void) } +/** + * Program a UPM with the code supplied in the table. + * + * The 'dummy' variable is used to increment the MAD. 'dummy' is + * supposed to be a pointer to the memory of the device being + * programmed by the UPM. The data in the MDR is written into + * memory and the MAD is incremented every time there's a read + * from 'dummy'. Unfortunately, the current prototype for this + * function doesn't allow for passing the address of this + * device, and changing the prototype will break a number lots + * of other code, so we need to use a round-about way of finding + * the value for 'dummy'. + * + * The value can be extracted from the base address bits of the + * Base Register (BR) associated with the specific UPM. To find + * that BR, we need to scan all 8 BRs until we find the one that + * has its MSEL bits matching the UPM we want. Once we know the + * right BR, we can extract the base address bits from it. + * + * The MxMR and the BR and OR of the chosen bank should all be + * configured before calling this function. + * + * Parameters: + * upm: 0=UPMA, 1=UPMB, 2=UPMC + * table: Pointer to an array of values to program + * size: Number of elements in the array. Must be 64 or less. +*/ void upmconfig (uint upm, uint *table, uint size) { - hang(); /* FIXME: upconfig() needed? */ +#if defined(CONFIG_MPC834X) + volatile immap_t *immap = (immap_t *) CFG_IMMRBAR; + volatile lbus83xx_t *lbus = &immap->lbus; + volatile uchar *dummy = NULL; + const u32 msel = (upm + 4) << BR_MSEL_SHIFT; /* What the MSEL field in BRn should be */ + volatile u32 *mxmr = &lbus->mamr + upm; /* Pointer to mamr, mbmr, or mcmr */ + uint i; + + /* Scan all the banks to determine the base address of the device */ + for (i = 0; i < 8; i++) { + if ((lbus->bank[i].br & BR_MSEL) == msel) { + dummy = (uchar *) (lbus->bank[i].br & BR_BA); + break; + } + } + + if (!dummy) { + printf("Error: %s() could not find matching BR\n", __FUNCTION__); + hang(); + } + + /* Set the OP field in the MxMR to "write" and the MAD field to 000000 */ + *mxmr = (*mxmr & 0xCFFFFFC0) | 0x10000000; + + for (i = 0; i < size; i++) { + lbus->mdr = table[i]; + __asm__ __volatile__ ("sync"); + *dummy; /* Write the value to memory and increment MAD */ + __asm__ __volatile__ ("sync"); + } + + /* Set the OP field in the MxMR to "normal" and the MAD field to 000000 */ + *mxmr &= 0xCFFFFFC0; +#else + printf("Error: %s() not defined for this configuration.\n", __FUNCTION__); + hang(); +#endif } @@ -150,9 +213,21 @@ unsigned long get_tbclk(void) #if defined(CONFIG_WATCHDOG) void watchdog_reset (void) { - hang(); /* FIXME: implement watchdog_reset()? */ +#ifdef CONFIG_MPC834X + int re_enable = disable_interrupts(); + + /* Reset the 83xx watchdog */ + volatile immap_t *immr = (immap_t *) CFG_IMMRBAR; + immr->wdt.swsrr = 0x556c; + immr->wdt.swsrr = 0xaa39; + + if (re_enable) + enable_interrupts (); +#else + hang(); +#endif } -#endif /* CONFIG_WATCHDOG */ +#endif #if defined(CONFIG_OF_FLAT_TREE) void |