summaryrefslogtreecommitdiff
path: root/cpu
diff options
context:
space:
mode:
Diffstat (limited to 'cpu')
-rw-r--r--cpu/blackfin/interrupts.c3
-rw-r--r--cpu/mpc83xx/fdt.c39
-rw-r--r--cpu/mpc8xxx/ddr/util.c9
-rw-r--r--cpu/ppc4xx/cpu.c9
-rw-r--r--cpu/ppc4xx/cpu_init.c69
-rw-r--r--cpu/ppc4xx/fdt.c10
6 files changed, 132 insertions, 7 deletions
diff --git a/cpu/blackfin/interrupts.c b/cpu/blackfin/interrupts.c
index bf6fb4b4c..19456e5c1 100644
--- a/cpu/blackfin/interrupts.c
+++ b/cpu/blackfin/interrupts.c
@@ -20,6 +20,7 @@
#include <common.h>
#include <config.h>
+#include <watchdog.h>
#include <asm/blackfin.h>
#include "cpu.h"
@@ -70,6 +71,8 @@ void udelay(unsigned long usec)
cclk = (CONFIG_CCLK_HZ);
while (usec > 1) {
+ WATCHDOG_RESET();
+
/*
* how many clock ticks to delay?
* - request(in useconds) * clock_ticks(Hz) / useconds/second
diff --git a/cpu/mpc83xx/fdt.c b/cpu/mpc83xx/fdt.c
index 13443cbd8..daf73a6e5 100644
--- a/cpu/mpc83xx/fdt.c
+++ b/cpu/mpc83xx/fdt.c
@@ -69,6 +69,45 @@ void ft_cpu_setup(void *blob, bd_t *bd)
defined(CONFIG_HAS_ETH2) || defined(CONFIG_HAS_ETH3) ||\
defined(CONFIG_HAS_ETH4) || defined(CONFIG_HAS_ETH5)
fdt_fixup_ethernet(blob);
+#ifdef CONFIG_MPC8313
+ /*
+ * mpc8313e erratum IPIC1 swapped TSEC interrupt ID numbers on rev. 1
+ * h/w (see AN3545). The base device tree in use has rev. 1 ID numbers,
+ * so if on Rev. 2 (and higher) h/w, we fix them up here
+ */
+ if (REVID_MAJOR(immr->sysconf.spridr) >= 2) {
+ int nodeoffset, path;
+ const char *prop;
+
+ nodeoffset = fdt_path_offset(blob, "/aliases");
+ if (nodeoffset >= 0) {
+#if defined(CONFIG_HAS_ETH0)
+ prop = fdt_getprop(blob, nodeoffset, "ethernet0", NULL);
+ if (prop) {
+ u32 tmp[] = { 32, 0x8, 33, 0x8, 34, 0x8 };
+
+ path = fdt_path_offset(blob, prop);
+ prop = fdt_getprop(blob, path, "interrupts", 0);
+ if (prop)
+ fdt_setprop(blob, path, "interrupts",
+ &tmp, sizeof(tmp));
+ }
+#endif
+#if defined(CONFIG_HAS_ETH1)
+ prop = fdt_getprop(blob, nodeoffset, "ethernet1", NULL);
+ if (prop) {
+ u32 tmp[] = { 35, 0x8, 36, 0x8, 37, 0x8 };
+
+ path = fdt_path_offset(blob, prop);
+ prop = fdt_getprop(blob, path, "interrupts", 0);
+ if (prop)
+ fdt_setprop(blob, path, "interrupts",
+ &tmp, sizeof(tmp));
+ }
+#endif
+ }
+ }
+#endif
#endif
do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
diff --git a/cpu/mpc8xxx/ddr/util.c b/cpu/mpc8xxx/ddr/util.c
index 4451989a0..1e2d92128 100644
--- a/cpu/mpc8xxx/ddr/util.c
+++ b/cpu/mpc8xxx/ddr/util.c
@@ -89,17 +89,18 @@ __fsl_ddr_set_lawbar(const common_timing_params_t *memctl_common_params,
? LAW_TRGT_IF_DDR_INTRLV : LAW_TRGT_IF_DDR_1;
if (set_ddr_laws(base, size, lawbar1_target_id) < 0) {
- printf("ERROR\n");
+ printf("%s: ERROR (ctrl #0, intrlv=%d)\n", __func__,
+ memctl_interleaved);
return ;
}
} else if (ctrl_num == 1) {
if (set_ddr_laws(base, size, LAW_TRGT_IF_DDR_2) < 0) {
- printf("ERROR\n");
+ printf("%s: ERROR (ctrl #1)\n", __func__);
return ;
}
} else {
- printf("unexpected controller number %u in %s\n",
- ctrl_num, __FUNCTION__);
+ printf("%s: unexpected DDR controller number (%u)\n", __func__,
+ ctrl_num);
}
}
diff --git a/cpu/ppc4xx/cpu.c b/cpu/ppc4xx/cpu.c
index a9a0ac345..e1b00a74c 100644
--- a/cpu/ppc4xx/cpu.c
+++ b/cpu/ppc4xx/cpu.c
@@ -608,10 +608,17 @@ int checkcpu (void)
break;
}
- printf (" at %s MHz (PLB=%lu, OPB=%lu, EBC=%lu MHz)\n", strmhz(buf, clock),
+ printf (" at %s MHz (PLB=%lu OPB=%lu EBC=%lu",
+ strmhz(buf, clock),
sys_info.freqPLB / 1000000,
get_OPB_freq() / 1000000,
sys_info.freqEBC / 1000000);
+#if defined(CONFIG_PCI) && \
+ (defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \
+ defined(CONFIG_440GR) || defined(CONFIG_440GRX))
+ printf(" PCI=%lu MHz", sys_info.freqPCI / 1000000);
+#endif
+ printf(")\n");
if (addstr[0] != 0)
printf(" %s\n", addstr);
diff --git a/cpu/ppc4xx/cpu_init.c b/cpu/ppc4xx/cpu_init.c
index a00da408c..ccd999367 100644
--- a/cpu/ppc4xx/cpu_init.c
+++ b/cpu/ppc4xx/cpu_init.c
@@ -330,3 +330,72 @@ int cpu_init_r (void)
return 0;
}
+
+#if defined(CONFIG_PCI) && \
+ (defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \
+ defined(CONFIG_440GR) || defined(CONFIG_440GRX))
+/*
+ * 440EP(x)/GR(x) PCI async/sync clocking restriction:
+ *
+ * In asynchronous PCI mode, the synchronous PCI clock must meet
+ * certain requirements. The following equation describes the
+ * relationship that must be maintained between the asynchronous PCI
+ * clock and synchronous PCI clock. Select an appropriate PCI:PLB
+ * ratio to maintain the relationship:
+ *
+ * AsyncPCIClk - 1MHz <= SyncPCIclock <= (2 * AsyncPCIClk) - 1MHz
+ */
+static int ppc4xx_pci_sync_clock_ok(u32 sync, u32 async)
+{
+ if (((async - 1000000) > sync) || (sync > ((2 * async) - 1000000)))
+ return 0;
+ else
+ return 1;
+}
+
+int ppc4xx_pci_sync_clock_config(u32 async)
+{
+ sys_info_t sys_info;
+ u32 sync;
+ int div;
+ u32 reg;
+ u32 spcid_val[] = {
+ CPR0_SPCID_SPCIDV0_DIV1, CPR0_SPCID_SPCIDV0_DIV2,
+ CPR0_SPCID_SPCIDV0_DIV3, CPR0_SPCID_SPCIDV0_DIV4 };
+
+ get_sys_info(&sys_info);
+ sync = sys_info.freqPCI;
+
+ /*
+ * First check if the equation above is met
+ */
+ if (!ppc4xx_pci_sync_clock_ok(sync, async)) {
+ /*
+ * Reconfigure PCI sync clock to meet the equation.
+ * Start with highest possible PCI sync frequency
+ * (divider 1).
+ */
+ for (div = 1; div <= 4; div++) {
+ sync = sys_info.freqPLB / div;
+ if (ppc4xx_pci_sync_clock_ok(sync, async))
+ break;
+ }
+
+ if (div <= 4) {
+ mtcpr(CPR0_SPCID, spcid_val[div]);
+
+ mfcpr(CPR0_ICFG, reg);
+ reg |= CPR0_ICFG_RLI_MASK;
+ mtcpr(CPR0_ICFG, reg);
+
+ /* do chip reset */
+ mtspr(SPRN_DBCR0, 0x20000000);
+ } else {
+ /* Impossible to configure the PCI sync clock */
+ return -1;
+ }
+ }
+
+ return 0;
+}
+#endif
diff --git a/cpu/ppc4xx/fdt.c b/cpu/ppc4xx/fdt.c
index 496e0285b..15a184b5c 100644
--- a/cpu/ppc4xx/fdt.c
+++ b/cpu/ppc4xx/fdt.c
@@ -42,7 +42,7 @@ void __ft_board_setup(void *blob, bd_t *bd)
u32 bxcr;
u32 ranges[EBC_NUM_BANKS * 4];
u32 *p = ranges;
- char *ebc_path = "/plb/opb/ebc";
+ char ebc_path[] = "/plb/opb/ebc";
ft_cpu_setup(blob, bd);
@@ -59,11 +59,17 @@ void __ft_board_setup(void *blob, bd_t *bd)
*p++ = 0;
*p++ = bxcr & EBC_BXCR_BAS_MASK;
*p++ = EBC_BXCR_BANK_SIZE(bxcr);
+
+#ifdef CONFIG_FDT_FIXUP_NOR_FLASH_SIZE
+ /* Try to update reg property in nor flash node too */
+ fdt_fixup_nor_flash_size(blob, i,
+ EBC_BXCR_BANK_SIZE(bxcr));
+#endif
}
}
/* Some 405 PPC's have EBC as direct PLB child in the dts */
- if (fdt_path_offset(blob, "/plb/opb/ebc") < 0)
+ if (fdt_path_offset(blob, ebc_path) < 0)
strcpy(ebc_path, "/plb/ebc");
rc = fdt_find_and_setprop(blob, ebc_path, "ranges", ranges,
(p - ranges) * sizeof(u32), 1);
generated by cgit v1.2.3 (git 2.39.1) at 2024-06-06 11:00:58 +0000