summaryrefslogtreecommitdiff
path: root/drivers/mtd/nand/fsl_elbc_nand.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mtd/nand/fsl_elbc_nand.c')
-rw-r--r--drivers/mtd/nand/fsl_elbc_nand.c92
1 files changed, 75 insertions, 17 deletions
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index 674c54200..367c7d7fc 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -75,7 +75,7 @@ struct fsl_elbc_ctrl {
struct fsl_elbc_mtd *chips[MAX_BANKS];
/* device info */
- lbus83xx_t *regs;
+ fsl_lbus_t *regs;
u8 __iomem *addr; /* Address of assigned FCM buffer */
unsigned int page; /* Last page written to / read from */
unsigned int read_bytes; /* Number of bytes read during command */
@@ -95,7 +95,6 @@ static struct nand_ecclayout fsl_elbc_oob_sp_eccm0 = {
.eccbytes = 3,
.eccpos = {6, 7, 8},
.oobfree = { {0, 5}, {9, 7} },
- .oobavail = 12,
};
/* Small Page FLASH with FMR[ECCM] = 1 */
@@ -103,7 +102,6 @@ static struct nand_ecclayout fsl_elbc_oob_sp_eccm1 = {
.eccbytes = 3,
.eccpos = {8, 9, 10},
.oobfree = { {0, 5}, {6, 2}, {11, 5} },
- .oobavail = 12,
};
/* Large Page FLASH with FMR[ECCM] = 0 */
@@ -111,7 +109,6 @@ static struct nand_ecclayout fsl_elbc_oob_lp_eccm0 = {
.eccbytes = 12,
.eccpos = {6, 7, 8, 22, 23, 24, 38, 39, 40, 54, 55, 56},
.oobfree = { {1, 5}, {9, 13}, {25, 13}, {41, 13}, {57, 7} },
- .oobavail = 48,
};
/* Large Page FLASH with FMR[ECCM] = 1 */
@@ -119,7 +116,48 @@ static struct nand_ecclayout fsl_elbc_oob_lp_eccm1 = {
.eccbytes = 12,
.eccpos = {8, 9, 10, 24, 25, 26, 40, 41, 42, 56, 57, 58},
.oobfree = { {1, 7}, {11, 13}, {27, 13}, {43, 13}, {59, 5} },
- .oobavail = 48,
+};
+
+/*
+ * fsl_elbc_oob_lp_eccm* specify that LP NAND's OOB free area starts at offset
+ * 1, so we have to adjust bad block pattern. This pattern should be used for
+ * x8 chips only. So far hardware does not support x16 chips anyway.
+ */
+static u8 scan_ff_pattern[] = { 0xff, };
+
+static struct nand_bbt_descr largepage_memorybased = {
+ .options = 0,
+ .offs = 0,
+ .len = 1,
+ .pattern = scan_ff_pattern,
+};
+
+/*
+ * ELBC may use HW ECC, so that OOB offsets, that NAND core uses for bbt,
+ * interfere with ECC positions, that's why we implement our own descriptors.
+ * OOB {11, 5}, works for both SP and LP chips, with ECCM = 1 and ECCM = 0.
+ */
+static u8 bbt_pattern[] = {'B', 'b', 't', '0' };
+static u8 mirror_pattern[] = {'1', 't', 'b', 'B' };
+
+static struct nand_bbt_descr bbt_main_descr = {
+ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE |
+ NAND_BBT_2BIT | NAND_BBT_VERSION,
+ .offs = 11,
+ .len = 4,
+ .veroffs = 15,
+ .maxblocks = 4,
+ .pattern = bbt_pattern,
+};
+
+static struct nand_bbt_descr bbt_mirror_descr = {
+ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE |
+ NAND_BBT_2BIT | NAND_BBT_VERSION,
+ .offs = 11,
+ .len = 4,
+ .veroffs = 15,
+ .maxblocks = 4,
+ .pattern = mirror_pattern,
};
/*=================================*/
@@ -133,7 +171,7 @@ static void set_addr(struct mtd_info *mtd, int column, int page_addr, int oob)
struct nand_chip *chip = mtd->priv;
struct fsl_elbc_mtd *priv = chip->priv;
struct fsl_elbc_ctrl *ctrl = priv->ctrl;
- lbus83xx_t *lbc = ctrl->regs;
+ fsl_lbus_t *lbc = ctrl->regs;
int buf_num;
ctrl->page = page_addr;
@@ -173,7 +211,7 @@ static int fsl_elbc_run_command(struct mtd_info *mtd)
struct nand_chip *chip = mtd->priv;
struct fsl_elbc_mtd *priv = chip->priv;
struct fsl_elbc_ctrl *ctrl = priv->ctrl;
- lbus83xx_t *lbc = ctrl->regs;
+ fsl_lbus_t *lbc = ctrl->regs;
long long end_tick;
u32 ltesr;
@@ -223,7 +261,7 @@ static void fsl_elbc_do_read(struct nand_chip *chip, int oob)
{
struct fsl_elbc_mtd *priv = chip->priv;
struct fsl_elbc_ctrl *ctrl = priv->ctrl;
- lbus83xx_t *lbc = ctrl->regs;
+ fsl_lbus_t *lbc = ctrl->regs;
if (priv->page_size) {
out_be32(&lbc->fir,
@@ -257,7 +295,7 @@ static void fsl_elbc_cmdfunc(struct mtd_info *mtd, unsigned int command,
struct nand_chip *chip = mtd->priv;
struct fsl_elbc_mtd *priv = chip->priv;
struct fsl_elbc_ctrl *ctrl = priv->ctrl;
- lbus83xx_t *lbc = ctrl->regs;
+ fsl_lbus_t *lbc = ctrl->regs;
ctrl->use_mdr = 0;
@@ -595,7 +633,7 @@ static int fsl_elbc_wait(struct mtd_info *mtd, struct nand_chip *chip)
{
struct fsl_elbc_mtd *priv = chip->priv;
struct fsl_elbc_ctrl *ctrl = priv->ctrl;
- lbus83xx_t *lbc = ctrl->regs;
+ fsl_lbus_t *lbc = ctrl->regs;
if (ctrl->status != LTESR_CC)
return NAND_STATUS_FAIL;
@@ -655,13 +693,15 @@ static struct fsl_elbc_ctrl *elbc_ctrl;
static void fsl_elbc_ctrl_init(void)
{
- immap_t *im = (immap_t *)CFG_IMMR;
-
elbc_ctrl = kzalloc(sizeof(*elbc_ctrl), GFP_KERNEL);
if (!elbc_ctrl)
return;
- elbc_ctrl->regs = &im->lbus;
+#ifdef CONFIG_MPC85xx
+ elbc_ctrl->regs = (void *)CONFIG_SYS_MPC85xx_LBC_ADDR;
+#else
+ elbc_ctrl->regs = &((immap_t *)CONFIG_SYS_IMMR)->lbus;
+#endif
/* clear event registers */
out_be32(&elbc_ctrl->regs->ltesr, LTESR_NAND_MASK);
@@ -724,7 +764,12 @@ int board_nand_init(struct nand_chip *nand)
nand->waitfunc = fsl_elbc_wait;
/* set up nand options */
- nand->options = NAND_NO_READRDY | NAND_NO_AUTOINCR;
+ nand->bbt_td = &bbt_main_descr;
+ nand->bbt_md = &bbt_mirror_descr;
+
+ /* set up nand options */
+ nand->options = NAND_NO_READRDY | NAND_NO_AUTOINCR |
+ NAND_USE_FLASH_BBT;
nand->controller = &elbc_ctrl->controller;
nand->priv = priv;
@@ -732,6 +777,20 @@ int board_nand_init(struct nand_chip *nand)
nand->ecc.read_page = fsl_elbc_read_page;
nand->ecc.write_page = fsl_elbc_write_page;
+#ifdef CONFIG_FSL_ELBC_FMR
+ priv->fmr = CONFIG_FSL_ELBC_FMR;
+#else
+ priv->fmr = (15 << FMR_CWTO_SHIFT) | (2 << FMR_AL_SHIFT);
+
+ /*
+ * Hardware expects small page has ECCM0, large page has ECCM1
+ * when booting from NAND. Board config can override if not
+ * booting from NAND.
+ */
+ if (or & OR_FCM_PGS)
+ priv->fmr |= FMR_ECCM;
+#endif
+
/* If CS Base Register selects full hardware ECC then use it */
if ((br & BR_DECC) == BR_DECC_CHK_GEN) {
nand->ecc.mode = NAND_ECC_HW;
@@ -748,11 +807,10 @@ int board_nand_init(struct nand_chip *nand)
nand->ecc.mode = NAND_ECC_SOFT;
}
- priv->fmr = (15 << FMR_CWTO_SHIFT) | (2 << FMR_AL_SHIFT);
-
- /* adjust Option Register and ECC to match Flash page size */
+ /* Large-page-specific setup */
if (or & OR_FCM_PGS) {
priv->page_size = 1;
+ nand->badblock_pattern = &largepage_memorybased;
/* adjust ecc setup if needed */
if ((br & BR_DECC) == BR_DECC_CHK_GEN) {
generated by cgit v1.2.3 (git 2.39.1) at 2024-06-02 01:36:47 +0000