Age | Commit message (Collapse) | Author |
|
Moved u8500_is_earlydrop() and cpu_is_u8500*() to
include/asm-arm/arch-db8500/cpu.h.
They are kept in cpu.h as the functions are very small and
should be inlined with each use of them.
The final binary actually also became around 100 bytes smaller.
ST-Ericsson ID: None
Signed-off-by: Joakim Axelsson <joakim.axelsson@stericsson.com>
Change-Id: Ied553b7c8a004a37c70c3e328a069ae8b2a92b23
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/9893
Reviewed-by: QATOOLS
Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
Tested-by: Michael BRANDT <michael.brandt@stericsson.com>
|
|
common.h and gpio.h were present in the u8500 board directory and in the
SoC include directory include/asm-arch/arch-stw8500.
This patch removes the duplicates in the board directory and replaces
all "common.h" and "gpio.h" with <asm/arch/common.h> and
<asm/arch/gpio.h>, respectively.
Change-Id: I4ff2a3a11324200222e3ae5b9d22eee6427f6d4c
Signed-off-by: Michael Brandt <michael.brandt@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/8838
Reviewed-by: Markus HELGESSON <markus.helgesson@stericsson.com>
Reviewed-by: Rikard OLSSON <rikard.p.olsson@stericsson.com>
|
|
mmc_read_cmd_file broke with the latest changes in fat and mmc.
This makes it work again.
Change-Id: I9bd0fee41bc4dfe790166415bb856104ab412536
Signed-off-by: Mikael Larsson <mikael.xt.larsson@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/5765
Reviewed-by: Ulf HANSSON <ulf.hansson@stericsson.com>
Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
|
|
Since memory sizes vary, addresses at the end of the memory
vary as well. The modem parameter partition should reside in
a fixed location and has therefore been moved to a fixed
location at the start of the memory. Other partitions have
been moved accordingly, but the kernel image and root file
system partition locations and sizes have been kept as they were.
ST Ericsson ID: ER270475
Change-Id: Ib7202e70ba23e1dd026b1d487505fed3b9032caf
Signed-off-by: Sebastian Rasmussen <sebastian.rasmussen@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/4303
Reviewed-by: Mikael LARSSON <mikael.xt.larsson@stericsson.com>
Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
Reviewed-by: Ulf HANSSON <ulf.hansson@stericsson.com>
|
|
MMC has been updated with several improvements. Primarily MMC
performance has been improved by using assembler code for low
level FIFO handling. Also some MMC functionality has been added,
e.g. support for DDR and reliable write.
Data and command delay times were incremented, otherwise hangups and
timeouts were observed.
Tested on HREF+ 1.1 V21 and HREF+ 1.1 V32 (Micron PoP).
Following WP depends on this change (more reliable SD card write
support):
ST-Ericsson ID: WP264488
Change-Id: Ic92abffe1640aa9375b8d43a6b8522ca8296a368
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/4056
Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
Tested-by: Michael BRANDT <michael.brandt@stericsson.com>
|
|
Move modem parameter partition (also known as CSPSA0, CSPSA
and Trim area) to end of 1 Gbyte PoPed eMMC.
ST-Ericsson ID: ER270475
Change-Id: I1e687bc1e7e2163debbf9ae009182f56e48fa75f
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/4233
Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
Tested-by: Sebastian RASMUSSEN <sebastian.rasmussen@stericsson.com>
|
|
IR265772: MMC driver does not detect SDHC cards.
IR254201: Restructure MMC/SD driver for U8500 board according to the
block device framework in mainline U-Boot.
Changes to mmc framework:
- Multi Block Read support in mmc framework.
- Wrap Multi Block Write/Read to be able to adopt for large transaction.
- Removed incorrect check in EXT CSD for high capacity MMC.
- Corrected check for high capacity SD cards.
- Set MMC buswidth to 8, prio of using 4.
Known limitations/bugs in mmc framework:
- High capacity MMC, will likely not get the correct density.
- High speed is set, whether or not the host supports it or not.
board/st/u8500/mmc_utils:
IMPORTANT FOR DEVELOPERS:
- Removed unessary U-Boot commands which is already supported in
cmd_fat.
- mmc_read_cmd_file: Read command.txt into bootcmd env from FAT FS in
SD card.
- write_partition_block: Writes the MBR if it is not already written.
board/st/u8500/mmc_host[c.h]:
- Implements the entire MMC/SD host driver for the PL180 block.
- There is still room for optimization:
Increase CLK-speed.
Use high-speed for SD cards.
Is GPIO setup correctly for both cards an eMMC.
EarlyDrop support not fully tested.
Dynamically turn on voltage/clocks to SD, not always.
More...
Note:
- Increased read/write performance for eMMC, to around 5.4 MB/s for
sequential read/write. Earlier measurements was 3.5 MB/s for read and
2.6 MB/s for write.
ST-Ericsson ID: ER265772, CR267996, ER267993
Change-Id: I921102edbde761407ff5ad476d1bb99f5dc7a2ef
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/2288
Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
Tested-by: Michael BRANDT <michael.brandt@stericsson.com>
Reviewed-by: Martin LUNDHOLM <martin.xa.lundholm@stericsson.com>
Tested-by: Martin LUNDHOLM <martin.xa.lundholm@stericsson.com>
Reviewed-by: Mikael LARSSON <mikael.xt.larsson@stericsson.com>
Tested-by: Mikael LARSSON <mikael.xt.larsson@stericsson.com>
|
|
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Change-Id: Ieec8e7940e7acdc88d7c17b12007f61841741325
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/390
Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
Tested-by: Jonas ABERG <jonas.aberg@stericsson.com>
|
|
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Change-Id: I821642d1f02f7021863a4b01f44da3114e0e0a69
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/389
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
Tested-by: Jonas ABERG <jonas.aberg@stericsson.com>
|
|
This patch is part of WP254081 which depends on WP252006.
* Fixed I2C, use real timeouts instead of counter
* Undefined CONFIG_BOOTTIME, since it as to be changed to new timer.c
* Merged V1 patches from Bangalore
The patches were merged manually, because of the differences
of the U-Boot baseline (Bangalore U-Boot 1.3.1, Lund 2009.11).
The original patches were created by Rabin Vincent
<rabin.vincent@stericsson.com>.
and were applied originally to
Branches: blr_lsp, remotes/origin/blr_lsp
Follows: qpppaaa_20100210_094651
0001-u8500-gpio-add-I2C0-altfun.patch
0002-u8500-use-correct-v1-macros.patch
0003-emmc-clean-up-paritioning.patch
0004-u8500-remove-incorrect-ram-settings.patch
0005-u8500-gpio-remove-unnecessary-ifdefs.patch
0006-u8500-add-ED-v1-detection-and-handle-eMMC-diff.patch
0008-u8500-mmc-don-t-disable-altfuns.patch
0009-u8500-gpio-remove-unused-defined.patch
0010-u8500-mmc-add-barrier-for-while-loop.patch
0011-u8500-mmc-handle-non-block-addressed-cards.patch
0012-u8500-mmc-remove-unused-gpio-settings-on-v1.patch
0013-u8500-emmc-build-fix.patch
0014-u8500-handle-v1-gpios-and-clocks.patch
0015-mmc-build-fix-for-block-addressing.patch
0016-u8500-add-clocks-and-hardware-files.patch
0017-u8500-enable-PRCUM-timers-reg-for-ED.patch
0018-u8500-handle-MTU-for-v1-ED.patch
0019-u8500-emmc-remove-unnecessary-GPIO-settings.patch
0020-u8500-remove-dead-code.patch
0021-u8500-add-working-MTU-timer.patch
0022-pl011-empty-rx-fifo-if-necessary.patch
0023-u8500-gpio-fix-cont-handling-in-altfunc.patch
0024-u8500-reduce-bootdelay-to-1-and-enable-zero-check.patch
0025-u8500-disable-forcing-of-verify-but-set-n-by-default.patch
0029-u8500-fix-some-gpio-settings.patch
0030-emmc-make-v1-paritioning-differences-explicit.patch
Signed-off-by: Michael Brandt <Michael.Brandt@stericsson.com>
Change-Id: I1106702e393c34f630e71f071e06c3952b0d3a1a
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/182
Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
Tested-by: Jonas ABERG <jonas.aberg@stericsson.com>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
|
|
emmc.c, mmc.c, mmc_util.c: whitespace correction to pass diff --check
mmc_util.c: removed unused display_file_list(), fixed type warnings.
|
|
applied PACK3 changes:
* cpu/arm_cortexa9/start.S: reset register changed, but U-Boot reset
command still does not work.
* config.mk: build address changed to 0x05FC0000
* board/st/u8500/mmc.c: MBR change: descrease 4th partition size (userfs
2) from 0x00c0'0000 to 0x00b9'a000 sectors (6,442,450,944 to
6,228,541,440 bytes).
* board\st\u8500\init_mmc.c: modify bootargs to set board_id to HREF or
MOP. Is is an extremly ugly solution. It modifies the bootargs env
variable directly (bootargs[9] = board_id;), instead of setting a
additional environment variable board_id and use it in the bootargs
envvar.
* board/st/u8500/mmc.c: undocumented clock changes.
* board/st/u8500/mmc_utils.c:
new routine to switch to 4-bit interface.
The switch is done in mmc_read_file(). It would make more sense
to do so in mmc_init.
* board/st/u8500/u8500.c:
clock changes for HSI and I2C. I2C is now clocked by SOC1 PLL and runs
with 24 MHz (depends on boot ROM SOC1 initialisation)
|
|
merged PACK2 changes: mmc and i2c frequency, put the second core into
wfe, default bootcmd.
|
|
|