summaryrefslogtreecommitdiff
path: root/board
AgeCommit message (Collapse)Author
2011-05-31Silencing TOC and itp error messages not applicable to snowball.Mathieu J. Poirier
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
2011-05-30The code should not hard-code memargs, environment variables are meant to be ↵Mathieu J. Poirier
flexible. Confining the change to snowball. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
2011-05-16Enabling 3V6 for BGF combo chip.Mathieu J. Poirier
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Conflicts: board/st/u8500/u8500.c
2011-03-23Explicitely turning FSMC so that kernel doesn't have to worry about it.Mathieu J. Poirier
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
2011-02-15Fixing default pin initialisation.Mathieu J. Poirier
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
2011-02-15u8500 snowball: make ether faster (squash in d5f1508)Alessandro Rubini
2011-02-15Fixing bug in gpio pin initializationMathieu J. Poirier
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
2011-02-14Adding ethernet initializationAlessandro Rubini
2011-02-14Adding GPIO config for LAN controller along with FSMC init.Alessandro Rubini
2011-02-14Splitting pin configuration for snowball and hrefs.Mathieu J. Poirier
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
2011-02-14Cleaning up GPIO26 init and adding board conditional init.Mathieu J. Poirier
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
2011-02-14u8500.c: set GPIO26 in power managerAlessandro Rubini
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
2011-02-14Fixing base address for emmc.Mathieu J. Poirier
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
2011-02-14Adding base support for snowball.Mathieu J. Poirier
- Initial pin configuration. - Introduction of u8500_is_snowball. - Introduction of new machine type. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
2011-02-11U8500: Display driver: Fix for HDMI not workingJimmy Rubin
This patch will enable MCDECLK but not change the clocksource. ST-Ericsson ID: ER 323824 ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I2d67a80ee24513251f6456cc7586530fb9a11b6e Signed-off-by: Jimmy Rubin <jimmy.rubin@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/15040 Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com> Reviewed-by: Marcel TUNNISSEN <marcel.tuennissen@stericsson.com>
2011-02-08U8500: Display driver: Only activate required clocks for displayTorbjorn Svensson
This patch changes the display initialization to only activate the display related clocks that are actually needed for the selected display mode, DSI or DPI. It also removes two compile time warnings. ST-Ericsson ID: CR 321311 ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I5ae07bd06ae02c2e7c1a0f7860b251f35a953e99 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/13587 Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com> Tested-by: Torbjorn SVENSSON <torbjorn.x.svensson@stericsson.com> Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com> Reviewed-by: Dan JOHANSSON <dan.johansson@stericsson.com>
2011-01-31U8500: Kick the Cortex watchdog when dumpingPer Fransson
ST-Ericsson ID: 321908 Change-Id: Ib51c36558e37c7f52db638052644758e6d3cc51a Signed-off-by: Per Fransson <per.xx.fransson@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/13848 Reviewed-by: QATOOLS Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
2011-01-28U8500: Change display reset for HREFP 2.0 V60 and laterMichael Brandt
The HREFP 2.0 V60 has no GPIO expander and the display reset IO line was moved to an ordinary GPIO line. Furthermore move the board dependent routine out from the mcde driver into u8500.c ST-Ericsson ID: CR 272893 Change-Id: If1362cecaeb183e67273066f759e220672f4537f Signed-off-by: Michael Brandt <michael.brandt@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/13480 Reviewed-by: Dan JOHANSSON <dan.johansson@stericsson.com> Reviewed-by: QATOOLS Reviewed-by: Joakim AXELSSON <joakim.axelsson@stericsson.com> Reviewed-by: Markus HELGESSON <markus.helgesson@stericsson.com>
2011-01-20U8500: Lower cut-off voltage threshold in AB8500Johan Palsson
The cut-off voltage for AB8500 is set too high in the OTP. To be able to start with a charger from a drained battery, we have to lower this threshold before the backlight and display is started. ST-Ericsson ID: ER320113 ST-Ericsson FOSS-OUT ID: Trivial Change-Id: Ia5c8c5b749fa9cb9cf8a15072ddfe5b0d1f33f5f Signed-off-by: Johan Palsson <johan.palsson@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/13028 Reviewed-by: QATOOLS Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
2011-01-20U8500: Display driver: Remove enable interrupts for mcdeTorbjorn Svensson
Removes enable interrupts for mcde mistakenly inherited from the kernel code. Furthermore three printfs has been changed to debug. ST-Ericsson ID: ER320412 ST-Ericsson FOSS-OUT ID: Trivial Change-Id: Ifd68404ecf36b040166b900cd51f6d503e4d2ef6 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/12876 Tested-by: Torbjorn SVENSSON <torbjorn.x.svensson@stericsson.com> Reviewed-by: Anders BAUER <anders.bauer@stericsson.com> Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com> Tested-by: Michael BRANDT <michael.brandt@stericsson.com>
2011-01-18U8500: Add support for HREFP 2.0 V60 and laterMichael Brandt
The HREFP 2.0 V60 has no GPIO expander, therefore some GPIO lines were moved around. The preferred approach was to first check if there is a machid in the environment. And if not try to program the GPIOE. If that fails, assume it is a V60 or newer. But for the splash screen, we need to know very early on which HW version we are running. At that time no environment is available, therefore it is unavoidable to do the I2C access (10 ms timeout), if both HW versions shall be supported in one binary. CAUTION: you need also a Linux kernel which supports MACH_TYPE_HREFV60. Older U8500 kernels will not even issue a start-up message. Depends-On: http://gerrit.lud.stericsson.com/gerrit/12335 ST-Ericsson ID: CR 272893 Change-Id: Id794df8c185dfbf67f7bce81deb49abf71129f7b Signed-off-by: Michael Brandt <michael.brandt@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/12578 Reviewed-by: Torbjorn SVENSSON <torbjorn.x.svensson@stericsson.com> Reviewed-by: Robert ROSENGREN <robert.rosengren@stericsson.com> Reviewed-by: Markus HELGESSON <markus.helgesson@stericsson.com> Reviewed-by: Bibek BASU <bibek.basu@stericsson.com>
2011-01-18U8500: Generic display driverTorbjorn Svensson
This patch introduces combined DSI and DPI display support for u-boot. The code is also similar to the kernel code for easy maintenance. ST-Ericsson ID: ER319241 ST-Ericsson FOSS-OUT ID: STETL-FOSS-OUT-10069 Change-Id: Ic232b6f738348cbedb67e27418678ddd223d7800 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/11038 Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com> Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com> Tested-by: Torbjorn SVENSSON <torbjorn.x.svensson@stericsson.com>
2010-12-15Removal of executable permissionRobert Rosengren
General removal of executable permission of built source and header files, i.e. changing permission from 755 to 644. ST-Ericsson ID: None ST-Ericsson FOSS-OUT ID: Trivial Change-Id: Ic3cfc551d1ef1b1f0b5825f9916d1fc15b15b444 Signed-off-by: Robert Rosengren <robert.rosengren@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/10896 Reviewed-by: QATOOLS Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com> Reviewed-by: Joakim AXELSSON <joakim.axelsson@stericsson.com>
2010-12-15U8500: Move itp and cspsa into SoC directoryRobert Rosengren
itp.c and cspsa_fp.c is SoC specific, not board specific. Other db8500 based boards need it as well, therefore move it into the SoC directory. ST-Ericsson ID: WP275634 ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I386c0d84e9f44f18ded0d9059fc2dae4c27974f2 Signed-off-by: Robert Rosengren <robert.rosengren@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/10894 Reviewed-by: QATOOLS Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com> Reviewed-by: Ulf HANSSON <ulf.hansson@stericsson.com> Reviewed-by: Joakim AXELSSON <joakim.axelsson@stericsson.com>
2010-12-13U8500: Changes to use a bmp file as splash imageTorbjorn Svensson
This change makes it possible to use a bitmap file (.bmp) as the splash image. This also removes the need to specify width and height of the splash image. RLE compression, 1 and 4 bit formats are not supported. ST-Ericsson ID: AP281072 Change-Id: I7c9ae953ad0440b665bb03ed1b9bbf43bab04e91 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/9406 Tested-by: Torbjorn SVENSSON <torbjorn.x.svensson@stericsson.com> Reviewed-by: QATOOLS Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com> Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
2010-12-08db8500: New GPIO driver and config, from Linux kernelJoakim Axelsson
Copied the GPIO configurator written for the Linux kernel. The Nomadik db8500 GPIO driver. Purpose is to be able to just cut-n-paste the GPIO config from Linux to U-boot. Also at the same time remove the obsolete and old gpio_alt_funcenable/disable methods. Now all is configured using a table in u8500.c. Now drivers doesn't have to worry about setting up the GPIO pins. Actually no driver today uses GPIO pins directly, only via hardware blocks within db8500. Functions are still added to be able to interact directly with a GPIO pin. This also cleaned up a lot of driver by not having to bit manipulate GPIO registers them self. The new driver is called db8500_gpio and placed in driver/gpio/. Functions are in include/db8500_gpio.h: void db8500_gpio_set_pull(unsigned gpio, enum db8500_gpio_pull pull); void db8500_gpio_make_input(unsigned gpio); int db8500_gpio_get_input(unsigned gpio); void db8500_gpio_make_output(unsigned gpio, int val); void db8500_gpio_set_output(unsigned gpio, int val); And for the configurator in include/db8500_pincfg.h: void db8500_gpio_config_pins(pin_cfg_t *cfgs, size_t num); All in all the final binary size has decreased. This is only done for db8500 nomadik GPIO. The code for gpio expanders has not been touched. All references to Nomadik has been removed in this driver. Only db8500 is left. ST-Ericsson ID: None Signed-off-by: Joakim Axelsson <joakim.axelsson@stericsson.com> Change-Id: I90aa1d46c813ffb5a777c3492b5751f5054f71cf Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/9904 Reviewed-by: QATOOLS Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
2010-12-08db8500: Move all clock code from board to SoCJoakim Axelsson
Moved clock code from board/st/u8500/u8500.c to cpu/arm_cortexa9/db8500/clock.c. Remove code to simulate Maja clocks. ST-Ericsson ID: None Signed-off-by: Joakim Axelsson <joakim.axelsson@stericsson.com> Change-Id: Ibbb21d53091ceaddcc01e1a195e129039f986696 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/7114 Reviewed-by: QATOOLS Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com> Tested-by: Michael BRANDT <michael.brandt@stericsson.com>
2010-12-08db8500: Move cpu identifying function to SoC codeJoakim Axelsson
Moved u8500_is_earlydrop() and cpu_is_u8500*() to include/asm-arm/arch-db8500/cpu.h. They are kept in cpu.h as the functions are very small and should be inlined with each use of them. The final binary actually also became around 100 bytes smaller. ST-Ericsson ID: None Signed-off-by: Joakim Axelsson <joakim.axelsson@stericsson.com> Change-Id: Ied553b7c8a004a37c70c3e328a069ae8b2a92b23 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/9893 Reviewed-by: QATOOLS Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com> Tested-by: Michael BRANDT <michael.brandt@stericsson.com>
2010-12-08db8500: Split arch_cpu code from boardJoakim Axelsson
First patch to split cpu_arch SoC-code away from board code. Added usage of arch_cpu_init() which is the corresponding to board_init(). Moved db8500 code from board/st/u8500/u8500.c to cpu/arm_cortexa9/db8500/cpu.c. Also created include/asm/arch-db8500/cpu.h and include/asm/arch-db8500/prcmu.h. ST-Ericsson ID: None Signed-off-by: Joakim Axelsson <joakim.axelsson@stericsson.com> Change-Id: I403d7d4f6c655c0d383afb3cb3be7e7df96683a3 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/7150 Reviewed-by: Joakim AXELSSON <joakim.axelsson@stericsson.com> Tested-by: Joakim AXELSSON <joakim.axelsson@stericsson.com> Reviewed-by: QATOOLS Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com> Tested-by: Michael BRANDT <michael.brandt@stericsson.com>
2010-11-29U8500: Move clock.c into SoC directoryMichael Brandt
clock.c is SoC specific, not board specific. Other db8500 based boards need it as well, therefore move it into the SoC directory. Change-Id: Ib23d44988628e8bb6a8cb89c56941cf2a815892d Signed-off-by: Michael Brandt <michael.brandt@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/9399 Reviewed-by: Joakim AXELSSON <joakim.axelsson@stericsson.com> Reviewed-by: Markus HELGESSON <markus.helgesson@stericsson.com> Reviewed-by: Robert ROSENGREN <robert.rosengren@stericsson.com>
2010-11-29U8500: Move prcmu.c into SoC directoryMichael Brandt
prcmu.c is SoC specific, not board specific. Other db8500 based boards need it as well, therefore move it into the SoC directory. Change-Id: Ic40e474700fb737dbbb8ce7ea6c88ea1b89d2f20 Signed-off-by: Michael Brandt <michael.brandt@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/9371 Reviewed-by: Joakim AXELSSON <joakim.axelsson@stericsson.com> Reviewed-by: Markus HELGESSON <markus.helgesson@stericsson.com> Reviewed-by: Robert ROSENGREN <robert.rosengren@stericsson.com>
2010-11-23U8500: config: removed non-applicable and unused definesMichael Brandt
Some defines were inherited from the old U-Boot 1.3.1 and are not used anywhere. This patch removes them. As a side-effect the flash.c dummy was also removed. Change-Id: Iecddb2f8bb59d909b936254085c358a1d246d205 Signed-off-by: Michael Brandt <michael.brandt@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/9203 Reviewed-by: Sebastian RASMUSSEN <sebastian.rasmussen@stericsson.com> Reviewed-by: Robert ROSENGREN <robert.rosengren@stericsson.com>
2010-11-19U8500: Removed duplicates of common.h and gpio.hMichael Brandt
common.h and gpio.h were present in the u8500 board directory and in the SoC include directory include/asm-arch/arch-stw8500. This patch removes the duplicates in the board directory and replaces all "common.h" and "gpio.h" with <asm/arch/common.h> and <asm/arch/gpio.h>, respectively. Change-Id: I4ff2a3a11324200222e3ae5b9d22eee6427f6d4c Signed-off-by: Michael Brandt <michael.brandt@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/8838 Reviewed-by: Markus HELGESSON <markus.helgesson@stericsson.com> Reviewed-by: Rikard OLSSON <rikard.p.olsson@stericsson.com>
2010-11-18u8500: pass MACH_TYPE_U8500 for u8500 platformMian Yousaf Kaukab
ST-Ericsson ID: ER280045 Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Change-Id: Iac299906a34917a914a8ee27dde2592c3b7a19bf Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/8776 Tested-by: Mian Yousaf KAUKAB <mian.yousaf.kaukab@stericsson.com> Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
2010-11-17U8500: crashdump: check find_mmc_device() return codeMichael Brandt
Fixed: Dereferencing possibly NULL "mmc" in call to function "mmc_init" ST-Ericsson ID: 273353 Change-Id: Ie75546c9e26b638d7cd7fe122a1180418b48df14 Signed-off-by: Michael Brandt <michael.brandt@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/8367 Reviewed-by: Mikael LARSSON1 <mikael.xt.larsson@stericsson.com>
2010-11-12U8500: Load splash image from TOCMikael Larsson
This patch removes splash image from u-boot binary and loads it from a toc entry called SPLASH instead. Depends-On: I2e182df7fa056a5df2deb05a4ebab844eedbb85d I715045aba01c1c747f9bd15f02c6d057f66ff968 I93e63a092fd6f229f530e55ec4b98e8e09db1c06 ST-Ericsson ID: ER268766 Change-Id: I4ee7885618d18d526dfca55d7c45b769cd9b52c9 Signed-off-by: Mikael Larsson <mikael.xt.larsson@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/6879 Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com> Reviewed-by: Rikard OLSSON <rikard.p.olsson@stericsson.com>
2010-11-12U8500: Enabled support for i2c1-3Robert Rosengren
Moved enabling of clocks into i2c driver, making it possible to use all i2c from 0 to 3. Changed sanity check of i2c_read function to make it possible read from devices with 2 byte address. ST-Ericsson ID: CR275232 Change-Id: I6c9c2efe20dcb6903419ba531a86228a5f4491ca Signed-off-by: Robert Rosengren <robert.rosengren@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/8340 Reviewed-by: Markus HELGESSON <markus.helgesson@stericsson.com> Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
2010-11-11U8500: Fix itp coverity issueMikael Larsson
This fixes a coverity issue in itp.c. ST-Ericsson ID: ER273353 Change-Id: Ifbe265567169a57d6dec940ef7593e601b9953e8 Signed-off-by: Mikael Larsson <mikael.xt.larsson@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/8284 Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com> Reviewed-by: Sebastian RASMUSSEN <sebastian.rasmussen@stericsson.com>
2010-11-10U8500: Fix sd card initMikael Larsson
Fixes sd card init that did not initialize ddr_en. This made sd fail init when previous contents in ddr_en was not 0. Change-Id: I5f2f33efdeb2e6af9e984805442ee0aa4285abdd Signed-off-by: Mikael Larsson <mikael.xt.larsson@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/8231 Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com> Reviewed-by: Robert ROSENGREN <robert.rosengren@stericsson.com> Tested-by: Robert ROSENGREN <robert.rosengren@stericsson.com>
2010-11-08U8500: Removed compiler warning in itp.cRikard Olsson
ST-Ericsson ID: ER268766 Change-Id: Ib09f8b2107e7ba09efd7ff4dec6a22949d56d5ff Signed-off-by: Rikard Olsson <rikard.p.olsson@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/7905 Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com> Reviewed-by: Mikael LARSSON1 <mikael.xt.larsson@stericsson.com>
2010-11-04U8500: Add support for SPIMarkus Helgesson
Added SPI support for U8500 ST-Ericsson ID: 269867 ST-Ericsson FOSS-OUT ID: STETL-FOSS-OUT-10121 Change-Id: Ied17dd39aa1ebc0ee95818c59c7f211ce655b8bf Signed-off-by: Markus Helgesson <markus.helgesson@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/7569 Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
2010-11-03U8500: Add cspsa fallback and fix toc loadRikard Olsson
Modified itp.c to load the modem when no cspsa flag for booting ITP is set. The loading of modem have been removed from X-Loader. Also correct a bug in itp.c ST-Ericsson ID: ER268766 Change-Id: I29f107c287ae5dbaf7274bc57ef30aaeacf67081 Signed-off-by: Rikard Olsson <rikard.p.olsson@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/7787 Reviewed-by: Mikael LARSSON1 <mikael.xt.larsson@stericsson.com> Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
2010-11-01U8500: Fix modem loading for V2Mikael Larsson
This fixes the broken modem loading in V2. ST-Ericsson ID: ER277406 Change-Id: Ifefe85d0cbeaa5c5e6dca3afe57f371530bc646a Signed-off-by: Mikael Larsson <mikael.xt.larsson@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/7551 Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
2010-10-26Fix restart of u-bootMikael Larsson
After introduction of modem loading, restart from kernel hangs in itp_load_modem_and_itp. This adds a check so that itp, modem and splash is not run after restart of u-boot. ST-Ericsson ID: ER277386 Change-Id: Ibfd12d9efa43549c652d3726904e4cefb59e6979 Signed-off-by: Mikael Larsson <mikael.xt.larsson@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/7192 Reviewed-by: Per FRANSSON <per.xx.fransson@stericsson.com> Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
2010-10-26Minimize time to splashMikael Larsson
Moved splash start to just after emmc init to minimize time to splash. Changed behaviour so that all SW is loaded after splash and splash is not loaded if it is itp. ST-Ericsson ID: ER268766 Change-Id: I09f8efce997ebd97d6de1a5fbff707b2aef175a4 Signed-off-by: Mikael Larsson <mikael.xt.larsson@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/6515 Reviewed-by: Sebastian RASMUSSEN <sebastian.rasmussen@stericsson.com> Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
2010-10-20Fix double free in mcdeMikael Larsson
This fixes double free in mcde code. Change-Id: I74150e4bea161313aa3298710dd8899db25501be Signed-off-by: Mikael Larsson <mikael.xt.larsson@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/6854 Reviewed-by: Torbjorn SVENSSON <torbjorn.x.svensson@stericsson.com> Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
2010-10-05Regulators: Fixup AUX3 regulator settings in MMC initFabien Quatravaux
VAUX3 and VRF1 voltage selection are located in the same register. Read-modify-write is performed to avoid interfering with the VRF1 regulator. ST-Ericsson ID: CAP_3984_001 ST-Ericsson ID: CR 270150 Change-Id: Ia3756f72790e45225e46418a1ec2490aec92250f Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/5384 Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
2010-10-05Modem loadingMikael Larsson
This adds functionality to load and execute modem in an early stage just after eMMC init. It also flushes ISSW since this will be removed in Xloader This patch depends on an updated Xloader that doesn't load modem, ipl and doesn't flush ISSW. Change-Id: I5be4a4a5af80df13e65ecd10c073b50e4d8703b9 Signed-off-by: Mikael Larsson <mikael.xt.larsson@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/5769 Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com> Reviewed-by: Peter NESSRUP <peter.nessrup@stericsson.com>
2010-09-30u8500: Do not reset timers when doing mmc performance testsJonas Aaberg
MMC performance tests broke other timing tests. Change-Id: I6a70ce55adc69d6069931b2d7649f4a7df10e5c6 Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/5089 Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
2010-09-29Fix mmc_read_cmd_fileMikael Larsson
mmc_read_cmd_file broke with the latest changes in fat and mmc. This makes it work again. Change-Id: I9bd0fee41bc4dfe790166415bb856104ab412536 Signed-off-by: Mikael Larsson <mikael.xt.larsson@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/5765 Reviewed-by: Ulf HANSSON <ulf.hansson@stericsson.com> Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-04-28 17:24:40 +0000